721 lines
25 KiB
C
721 lines
25 KiB
C
/*
|
|
* Copyright (c) 2001-2002 by David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef __USB_CORE_HCD_H
|
|
#define __USB_CORE_HCD_H
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/rwsem.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/idr.h>
|
|
|
|
#define MAX_TOPO_LEVEL 6
|
|
|
|
/* This file contains declarations of usbcore internals that are mostly
|
|
* used or exposed by Host Controller Drivers.
|
|
*/
|
|
|
|
/*
|
|
* USB Packet IDs (PIDs)
|
|
*/
|
|
#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
|
|
#define USB_PID_OUT 0xe1
|
|
#define USB_PID_ACK 0xd2
|
|
#define USB_PID_DATA0 0xc3
|
|
#define USB_PID_PING 0xb4 /* USB 2.0 */
|
|
#define USB_PID_SOF 0xa5
|
|
#define USB_PID_NYET 0x96 /* USB 2.0 */
|
|
#define USB_PID_DATA2 0x87 /* USB 2.0 */
|
|
#define USB_PID_SPLIT 0x78 /* USB 2.0 */
|
|
#define USB_PID_IN 0x69
|
|
#define USB_PID_NAK 0x5a
|
|
#define USB_PID_DATA1 0x4b
|
|
#define USB_PID_PREAMBLE 0x3c /* Token mode */
|
|
#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
|
|
#define USB_PID_SETUP 0x2d
|
|
#define USB_PID_STALL 0x1e
|
|
#define USB_PID_MDATA 0x0f /* USB 2.0 */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* USB Host Controller Driver (usb_hcd) framework
|
|
*
|
|
* Since "struct usb_bus" is so thin, you can't share much code in it.
|
|
* This framework is a layer over that, and should be more sharable.
|
|
*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
struct giveback_urb_bh {
|
|
bool running;
|
|
spinlock_t lock;
|
|
struct list_head head;
|
|
struct tasklet_struct bh;
|
|
struct usb_host_endpoint *completing_ep;
|
|
};
|
|
|
|
struct usb_hcd {
|
|
|
|
/*
|
|
* housekeeping
|
|
*/
|
|
struct usb_bus self; /* hcd is-a bus */
|
|
struct kref kref; /* reference counter */
|
|
|
|
const char *product_desc; /* product/vendor string */
|
|
int speed; /* Speed for this roothub.
|
|
* May be different from
|
|
* hcd->driver->flags & HCD_MASK
|
|
*/
|
|
char irq_descr[24]; /* driver + bus # */
|
|
|
|
struct timer_list rh_timer; /* drives root-hub polling */
|
|
struct urb *status_urb; /* the current status urb */
|
|
#ifdef CONFIG_PM
|
|
struct work_struct wakeup_work; /* for remote wakeup */
|
|
#endif
|
|
|
|
/*
|
|
* hardware info/state
|
|
*/
|
|
const struct hc_driver *driver; /* hw-specific hooks */
|
|
|
|
/*
|
|
* OTG and some Host controllers need software interaction with phys;
|
|
* other external phys should be software-transparent
|
|
*/
|
|
struct usb_phy *usb_phy;
|
|
struct phy *phy;
|
|
|
|
/* Flags that need to be manipulated atomically because they can
|
|
* change while the host controller is running. Always use
|
|
* set_bit() or clear_bit() to change their values.
|
|
*/
|
|
unsigned long flags;
|
|
#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
|
|
#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
|
|
#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
|
|
#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
|
|
#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
|
|
#define HCD_FLAG_DEAD 6 /* controller has died? */
|
|
#define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
|
|
#define HCD_FLAG_DEV_AUTHORIZED 8 /* authorize devices? */
|
|
|
|
/* The flags can be tested using these macros; they are likely to
|
|
* be slightly faster than test_bit().
|
|
*/
|
|
#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
|
|
#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
|
|
#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
|
|
#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
|
|
#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
|
|
#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
|
|
|
|
/*
|
|
* Specifies if interfaces are authorized by default
|
|
* or they require explicit user space authorization; this bit is
|
|
* settable through /sys/class/usb_host/X/interface_authorized_default
|
|
*/
|
|
#define HCD_INTF_AUTHORIZED(hcd) \
|
|
((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
|
|
|
|
/*
|
|
* Specifies if devices are authorized by default
|
|
* or they require explicit user space authorization; this bit is
|
|
* settable through /sys/class/usb_host/X/authorized_default
|
|
*/
|
|
#define HCD_DEV_AUTHORIZED(hcd) \
|
|
((hcd)->flags & (1U << HCD_FLAG_DEV_AUTHORIZED))
|
|
|
|
/* Flags that get set only during HCD registration or removal. */
|
|
unsigned rh_registered:1;/* is root hub registered? */
|
|
unsigned rh_pollable:1; /* may we poll the root hub? */
|
|
unsigned msix_enabled:1; /* driver has MSI-X enabled? */
|
|
unsigned remove_phy:1; /* auto-remove USB phy */
|
|
|
|
/* The next flag is a stopgap, to be removed when all the HCDs
|
|
* support the new root-hub polling mechanism. */
|
|
unsigned uses_new_polling:1;
|
|
unsigned wireless:1; /* Wireless USB HCD */
|
|
unsigned has_tt:1; /* Integrated TT in root hub */
|
|
unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
|
|
unsigned can_do_streams:1; /* HC supports streams */
|
|
unsigned tpl_support:1; /* OTG & EH TPL support */
|
|
unsigned cant_recv_wakeups:1;
|
|
/* wakeup requests from downstream aren't received */
|
|
|
|
unsigned int irq; /* irq allocated */
|
|
void __iomem *regs; /* device memory/io */
|
|
resource_size_t rsrc_start; /* memory/io resource start */
|
|
resource_size_t rsrc_len; /* memory/io resource length */
|
|
unsigned power_budget; /* in mA, 0 = no limit */
|
|
|
|
struct giveback_urb_bh high_prio_bh;
|
|
struct giveback_urb_bh low_prio_bh;
|
|
|
|
/* bandwidth_mutex should be taken before adding or removing
|
|
* any new bus bandwidth constraints:
|
|
* 1. Before adding a configuration for a new device.
|
|
* 2. Before removing the configuration to put the device into
|
|
* the addressed state.
|
|
* 3. Before selecting a different configuration.
|
|
* 4. Before selecting an alternate interface setting.
|
|
*
|
|
* bandwidth_mutex should be dropped after a successful control message
|
|
* to the device, or resetting the bandwidth after a failed attempt.
|
|
*/
|
|
struct mutex *bandwidth_mutex;
|
|
struct usb_hcd *shared_hcd;
|
|
struct usb_hcd *primary_hcd;
|
|
|
|
|
|
#define HCD_BUFFER_POOLS 4
|
|
struct dma_pool *pool[HCD_BUFFER_POOLS];
|
|
|
|
int state;
|
|
# define __ACTIVE 0x01
|
|
# define __SUSPEND 0x04
|
|
# define __TRANSIENT 0x80
|
|
|
|
# define HC_STATE_HALT 0
|
|
# define HC_STATE_RUNNING (__ACTIVE)
|
|
# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
|
|
# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
|
|
# define HC_STATE_SUSPENDED (__SUSPEND)
|
|
|
|
#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
|
|
#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
|
|
|
|
/* more shared queuing code would be good; it should support
|
|
* smarter scheduling, handle transaction translators, etc;
|
|
* input size of periodic table to an interrupt scheduler.
|
|
* (ohci 32, uhci 1024, ehci 256/512/1024).
|
|
*/
|
|
|
|
/* The HC driver's private data is stored at the end of
|
|
* this structure.
|
|
*/
|
|
unsigned long hcd_priv[0]
|
|
__attribute__ ((aligned(sizeof(s64))));
|
|
};
|
|
|
|
/* 2.4 does this a bit differently ... */
|
|
static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
|
|
{
|
|
return &hcd->self;
|
|
}
|
|
|
|
static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
|
|
{
|
|
return container_of(bus, struct usb_hcd, self);
|
|
}
|
|
|
|
struct hcd_timeout { /* timeouts we allocate */
|
|
struct list_head timeout_list;
|
|
struct timer_list timer;
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
struct hc_driver {
|
|
const char *description; /* "ehci-hcd" etc */
|
|
const char *product_desc; /* product/vendor string */
|
|
size_t hcd_priv_size; /* size of private data */
|
|
|
|
/* irq handler */
|
|
irqreturn_t (*irq) (struct usb_hcd *hcd);
|
|
|
|
int flags;
|
|
#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
|
|
#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
|
|
#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
|
|
#define HCD_USB11 0x0010 /* USB 1.1 */
|
|
#define HCD_USB2 0x0020 /* USB 2.0 */
|
|
#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
|
|
#define HCD_USB3 0x0040 /* USB 3.0 */
|
|
#define HCD_USB31 0x0050 /* USB 3.1 */
|
|
#define HCD_MASK 0x0070
|
|
#define HCD_BH 0x0100 /* URB complete in BH context */
|
|
|
|
/* called to init HCD and root hub */
|
|
int (*reset) (struct usb_hcd *hcd);
|
|
int (*start) (struct usb_hcd *hcd);
|
|
|
|
/* NOTE: these suspend/resume calls relate to the HC as
|
|
* a whole, not just the root hub; they're for PCI bus glue.
|
|
*/
|
|
/* called after suspending the hub, before entering D3 etc */
|
|
int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
|
|
|
|
/* called after entering D0 (etc), before resuming the hub */
|
|
int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
|
|
|
|
/* cleanly make HCD stop writing memory and doing I/O */
|
|
void (*stop) (struct usb_hcd *hcd);
|
|
|
|
/* shutdown HCD */
|
|
void (*shutdown) (struct usb_hcd *hcd);
|
|
|
|
/* return current frame number */
|
|
int (*get_frame_number) (struct usb_hcd *hcd);
|
|
|
|
/* manage i/o requests, device state */
|
|
int (*urb_enqueue)(struct usb_hcd *hcd,
|
|
struct urb *urb, gfp_t mem_flags);
|
|
int (*urb_dequeue)(struct usb_hcd *hcd,
|
|
struct urb *urb, int status);
|
|
|
|
/*
|
|
* (optional) these hooks allow an HCD to override the default DMA
|
|
* mapping and unmapping routines. In general, they shouldn't be
|
|
* necessary unless the host controller has special DMA requirements,
|
|
* such as alignment contraints. If these are not specified, the
|
|
* general usb_hcd_(un)?map_urb_for_dma functions will be used instead
|
|
* (and it may be a good idea to call these functions in your HCD
|
|
* implementation)
|
|
*/
|
|
int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags);
|
|
void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
|
|
|
|
/* hw synch, freeing endpoint resources that urb_dequeue can't */
|
|
void (*endpoint_disable)(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep);
|
|
|
|
/* (optional) reset any endpoint state such as sequence number
|
|
and current window */
|
|
void (*endpoint_reset)(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep);
|
|
|
|
/* root hub support */
|
|
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
|
|
int (*hub_control) (struct usb_hcd *hcd,
|
|
u16 typeReq, u16 wValue, u16 wIndex,
|
|
char *buf, u16 wLength);
|
|
int (*bus_suspend)(struct usb_hcd *);
|
|
int (*bus_resume)(struct usb_hcd *);
|
|
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
|
|
|
|
/* force handover of high-speed port to full-speed companion */
|
|
void (*relinquish_port)(struct usb_hcd *, int);
|
|
/* has a port been handed over to a companion? */
|
|
int (*port_handed_over)(struct usb_hcd *, int);
|
|
|
|
/* CLEAR_TT_BUFFER completion callback */
|
|
void (*clear_tt_buffer_complete)(struct usb_hcd *,
|
|
struct usb_host_endpoint *);
|
|
|
|
/* xHCI specific functions */
|
|
/* Called by usb_alloc_dev to alloc HC device structures */
|
|
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
|
|
/* Called by usb_disconnect to free HC device structures */
|
|
void (*free_dev)(struct usb_hcd *, struct usb_device *);
|
|
/* Change a group of bulk endpoints to support multiple stream IDs */
|
|
int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
unsigned int num_streams, gfp_t mem_flags);
|
|
/* Reverts a group of bulk endpoints back to not using stream IDs.
|
|
* Can fail if we run out of memory.
|
|
*/
|
|
int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
|
|
struct usb_host_endpoint **eps, unsigned int num_eps,
|
|
gfp_t mem_flags);
|
|
|
|
/* Bandwidth computation functions */
|
|
/* Note that add_endpoint() can only be called once per endpoint before
|
|
* check_bandwidth() or reset_bandwidth() must be called.
|
|
* drop_endpoint() can only be called once per endpoint also.
|
|
* A call to xhci_drop_endpoint() followed by a call to
|
|
* xhci_add_endpoint() will add the endpoint to the schedule with
|
|
* possibly new parameters denoted by a different endpoint descriptor
|
|
* in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
|
|
* call to xhci_drop_endpoint() is not allowed.
|
|
*/
|
|
/* Allocate endpoint resources and add them to a new schedule */
|
|
int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
|
|
struct usb_host_endpoint *);
|
|
/* Drop an endpoint from a new schedule */
|
|
int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
|
|
struct usb_host_endpoint *);
|
|
/* Check that a new hardware configuration, set using
|
|
* endpoint_enable and endpoint_disable, does not exceed bus
|
|
* bandwidth. This must be called before any set configuration
|
|
* or set interface requests are sent to the device.
|
|
*/
|
|
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
|
|
/* Reset the device schedule to the last known good schedule,
|
|
* which was set from a previous successful call to
|
|
* check_bandwidth(). This reverts any add_endpoint() and
|
|
* drop_endpoint() calls since that last successful call.
|
|
* Used for when a check_bandwidth() call fails due to resource
|
|
* or bandwidth constraints.
|
|
*/
|
|
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
|
|
/* Returns the hardware-chosen device address */
|
|
int (*address_device)(struct usb_hcd *, struct usb_device *udev);
|
|
/* prepares the hardware to send commands to the device */
|
|
int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
|
|
/* Notifies the HCD after a hub descriptor is fetched.
|
|
* Will block.
|
|
*/
|
|
int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
|
|
struct usb_tt *tt, gfp_t mem_flags);
|
|
int (*reset_device)(struct usb_hcd *, struct usb_device *);
|
|
/* Notifies the HCD after a device is connected and its
|
|
* address is set
|
|
*/
|
|
int (*update_device)(struct usb_hcd *, struct usb_device *);
|
|
int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
|
|
/* USB 3.0 Link Power Management */
|
|
/* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
|
|
int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
|
|
struct usb_device *, enum usb3_link_state state);
|
|
/* The xHCI host controller can still fail the command to
|
|
* disable the LPM timeouts, so this can return an error code.
|
|
*/
|
|
int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
|
|
struct usb_device *, enum usb3_link_state state);
|
|
int (*find_raw_port_number)(struct usb_hcd *, int);
|
|
/* Call for power on/off the port if necessary */
|
|
int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
|
|
|
|
};
|
|
|
|
static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
|
|
{
|
|
return hcd->driver->flags & HCD_BH;
|
|
}
|
|
|
|
static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
|
|
struct usb_host_endpoint *ep)
|
|
{
|
|
return hcd->high_prio_bh.completing_ep == ep;
|
|
}
|
|
|
|
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
|
|
extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
|
|
int status);
|
|
extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
|
|
|
|
extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
|
|
extern int usb_hcd_unlink_urb(struct urb *urb, int status);
|
|
extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
|
|
int status);
|
|
extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
|
|
gfp_t mem_flags);
|
|
extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
|
|
extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
|
|
extern void usb_hcd_flush_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_reset_endpoint(struct usb_device *udev,
|
|
struct usb_host_endpoint *ep);
|
|
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
|
|
extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
|
|
struct usb_host_config *new_config,
|
|
struct usb_host_interface *old_alt,
|
|
struct usb_host_interface *new_alt);
|
|
extern int usb_hcd_get_frame_number(struct usb_device *udev);
|
|
|
|
extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
|
|
struct device *dev, const char *bus_name);
|
|
extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
|
|
struct device *dev, const char *bus_name,
|
|
struct usb_hcd *shared_hcd);
|
|
extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
|
|
extern void usb_put_hcd(struct usb_hcd *hcd);
|
|
extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
|
|
extern int usb_add_hcd(struct usb_hcd *hcd,
|
|
unsigned int irqnum, unsigned long irqflags);
|
|
extern void usb_remove_hcd(struct usb_hcd *hcd);
|
|
extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
|
|
|
|
struct platform_device;
|
|
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
|
|
|
|
#ifdef CONFIG_PCI
|
|
struct pci_dev;
|
|
struct pci_device_id;
|
|
extern int usb_hcd_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id);
|
|
extern void usb_hcd_pci_remove(struct pci_dev *dev);
|
|
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
|
|
|
|
extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
|
|
|
|
#ifdef CONFIG_PM
|
|
extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
|
|
#endif
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* pci-ish (pdev null is ok) buffer alloc/mapping support */
|
|
void usb_init_pool_max(void);
|
|
int hcd_buffer_create(struct usb_hcd *hcd);
|
|
void hcd_buffer_destroy(struct usb_hcd *hcd);
|
|
|
|
void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
|
|
gfp_t mem_flags, dma_addr_t *dma);
|
|
void hcd_buffer_free(struct usb_bus *bus, size_t size,
|
|
void *addr, dma_addr_t dma);
|
|
|
|
/* generic bus glue, needed for host controllers that don't use PCI */
|
|
extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
|
|
|
|
extern void usb_hc_died(struct usb_hcd *hcd);
|
|
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
|
|
extern void usb_wakeup_notification(struct usb_device *hdev,
|
|
unsigned int portnum);
|
|
|
|
extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
|
|
extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
|
|
|
|
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
|
|
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
|
|
#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
|
|
#define usb_settoggle(dev, ep, out, bit) \
|
|
((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
|
|
((bit) << (ep)))
|
|
|
|
/* -------------------------------------------------------------------------- */
|
|
|
|
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
|
|
extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
|
|
struct usb_bus *, unsigned port);
|
|
extern int usb_new_device(struct usb_device *dev);
|
|
extern void usb_disconnect(struct usb_device **);
|
|
|
|
extern int usb_get_configuration(struct usb_device *dev);
|
|
extern void usb_destroy_configuration(struct usb_device *dev);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* HCD Root Hub support
|
|
*/
|
|
|
|
#include <linux/usb/ch11.h>
|
|
|
|
/*
|
|
* As of USB 2.0, full/low speed devices are segregated into trees.
|
|
* One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
|
|
* The other type grows from high speed hubs when they connect to
|
|
* full/low speed devices using "Transaction Translators" (TTs).
|
|
*
|
|
* TTs should only be known to the hub driver, and high speed bus
|
|
* drivers (only EHCI for now). They affect periodic scheduling and
|
|
* sometimes control/bulk error recovery.
|
|
*/
|
|
|
|
struct usb_device;
|
|
|
|
struct usb_tt {
|
|
struct usb_device *hub; /* upstream highspeed hub */
|
|
int multi; /* true means one TT per port */
|
|
unsigned think_time; /* think time in ns */
|
|
void *hcpriv; /* HCD private data */
|
|
|
|
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
|
|
spinlock_t lock;
|
|
struct list_head clear_list; /* of usb_tt_clear */
|
|
struct work_struct clear_work;
|
|
};
|
|
|
|
struct usb_tt_clear {
|
|
struct list_head clear_list;
|
|
unsigned tt;
|
|
u16 devinfo;
|
|
struct usb_hcd *hcd;
|
|
struct usb_host_endpoint *ep;
|
|
};
|
|
|
|
extern int usb_hub_clear_tt_buffer(struct urb *urb);
|
|
extern void usb_ep0_reinit(struct usb_device *);
|
|
|
|
/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
|
|
#define DeviceRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
|
|
#define DeviceOutRequest \
|
|
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
|
|
|
|
#define InterfaceRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
|
|
|
|
#define EndpointRequest \
|
|
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
|
|
#define EndpointOutRequest \
|
|
((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
|
|
|
|
/* class requests from the USB 2.0 hub spec, table 11-15 */
|
|
/* GetBusState and SetHubDescriptor are optional, omitted */
|
|
#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
|
|
#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
|
|
#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
|
|
#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
|
|
#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
|
|
#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
|
|
#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* class requests from USB 3.1 hub spec, table 10-7 */
|
|
#define SetHubDepth (0x2000 | HUB_SET_DEPTH)
|
|
#define GetPortErrorCount (0xa300 | HUB_GET_PORT_ERR_COUNT)
|
|
|
|
/*
|
|
* Generic bandwidth allocation constants/support
|
|
*/
|
|
#define FRAME_TIME_USECS 1000L
|
|
#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
|
|
/* Trying not to use worst-case bit-stuffing
|
|
* of (7/6 * 8 * bytecount) = 9.33 * bytecount */
|
|
/* bytecount = data payload byte count */
|
|
|
|
#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
|
|
/* convert nanoseconds to microseconds, rounding up */
|
|
|
|
/*
|
|
* Full/low speed bandwidth allocation constants/support.
|
|
*/
|
|
#define BW_HOST_DELAY 1000L /* nanoseconds */
|
|
#define BW_HUB_LS_SETUP 333L /* nanoseconds */
|
|
/* 4 full-speed bit times (est.) */
|
|
|
|
#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
|
|
#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
|
|
#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
|
|
|
|
/*
|
|
* Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
|
|
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
|
|
* to preallocate bandwidth)
|
|
*/
|
|
#define USB2_HOST_DELAY 5 /* nsec, guess */
|
|
#define HS_NSECS(bytes) (((55 * 8 * 2083) \
|
|
+ (2083UL * (3 + BitTime(bytes))))/1000 \
|
|
+ USB2_HOST_DELAY)
|
|
#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
|
|
+ (2083UL * (3 + BitTime(bytes))))/1000 \
|
|
+ USB2_HOST_DELAY)
|
|
#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
|
|
#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
|
|
|
|
extern long usb_calc_bus_time(int speed, int is_input,
|
|
int isoc, int bytecount);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
extern void usb_set_device_state(struct usb_device *udev,
|
|
enum usb_device_state new_state);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* exported only within usbcore */
|
|
|
|
extern struct idr usb_bus_idr;
|
|
extern struct mutex usb_bus_idr_lock;
|
|
extern wait_queue_head_t usb_kill_urb_queue;
|
|
|
|
|
|
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
|
|
|
|
#ifdef CONFIG_PM
|
|
extern void usb_root_hub_lost_power(struct usb_device *rhdev);
|
|
extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
|
|
extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
|
|
extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
|
|
#else
|
|
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
|
|
{
|
|
return;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
|
|
|
|
struct usb_mon_operations {
|
|
void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
|
|
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
|
|
void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
|
|
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
|
|
};
|
|
|
|
extern const struct usb_mon_operations *mon_ops;
|
|
|
|
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_submit)(bus, urb);
|
|
}
|
|
|
|
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
|
|
int error)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_submit_error)(bus, urb, error);
|
|
}
|
|
|
|
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
|
|
int status)
|
|
{
|
|
if (bus->monitored)
|
|
(*mon_ops->urb_complete)(bus, urb, status);
|
|
}
|
|
|
|
int usb_mon_register(const struct usb_mon_operations *ops);
|
|
void usb_mon_deregister(void);
|
|
|
|
#else
|
|
|
|
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
|
|
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
|
|
int error) {}
|
|
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
|
|
int status) {}
|
|
|
|
#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* random stuff */
|
|
|
|
#define RUN_CONTEXT (in_irq() ? "in_irq" \
|
|
: (in_interrupt() ? "in_interrupt" : "can sleep"))
|
|
|
|
|
|
/* This rwsem is for use only by the hub driver and ehci-hcd.
|
|
* Nobody else should touch it.
|
|
*/
|
|
extern struct rw_semaphore ehci_cf_port_reset_rwsem;
|
|
|
|
/* Keep track of which host controller drivers are loaded */
|
|
#define USB_UHCI_LOADED 0
|
|
#define USB_OHCI_LOADED 1
|
|
#define USB_EHCI_LOADED 2
|
|
extern unsigned long usb_hcds_loaded;
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* __USB_CORE_HCD_H */
|