linux_old1/include/linux/platform_data
David S. Miller 740215ddb5 NFC 4.4 pull request
This is the NFC pull request for 4.4.
 
 It's a bit bigger than usual, the 3 main culprits being:
 
 - A new driver for Intel's Fields Peak NCI chipset. In order to
   support this chipset we had to export a few NCI routines and
   extend the driver NCI ops to not only support proprietary
   commands but also core ones.
 
 - Support for vendor commands for both STM drivers, st-nci
   and st21nfca. Those vendor commands allow to run factory tests
   through the NFC netlink interface.
 
 - New i2c and SPI support for the Marvell driver, together with
   firmware download support for this driver's core.
 
 Besides that we also have:
 
 - A few file renames in the STM drivers, to keep the naming
   consistent between drivers.
 
 - Some improvements and fixes on the NCI HCI layer, mostly to
   properly reach a secure element over a legacy HCI link.
 
 - A few fixes for the s3fwrn5 and trf7970a drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWMGIaAAoJEIqAPN1PVmxKHjYP/3Q3Y4Vhvw3kTfDP3IlnAuH3
 XjBMGKPLu72MmtSk9jFOr5VuC76YtJzwf+4nKGJybu619NPKfxXN7r83bpsZV1Bk
 +0cS1RpjIQh92a0ElvX1muCFhgH7ax7zeqQ+29OSpA33e67/DlUcwxiqzF15cwWC
 Bk0pUv1FxMoNi5ZkG1JrRqrhx/Yqo1dw2HrnMbKVgwLtLzODBuzoGVKfydTo0b1j
 hkl30DPF3AYMxnwIml3tM8zT96b1LtD0Xgs1yF8IdrIJ+6YLn/6tnw1rUxnE8Ovo
 JFtvtS0OKjGTNFr1NhueG0i5td8TR4MAJKHh0Lz9ISIFWtNtsVjFfGuAeWZcQ/n/
 rQS7xOvzBCndNbe8PS9wBiNQAqLAH5/dzvKRwNboRttkpwIrNOgaBYj2LpuRzpfO
 p+ArwBryAorfxQVOIWl4knc59UsiPUKOK61uMTZ1sU7jCEvUNVChIm8EGRlMnpMQ
 ZFlBa2lqNdgz7ubKLofbnWLiCNY6r0E13MSLHZlJZX61IMjs13ojDeKMvitFBe+b
 1hDwbSWxIRB8xKbcsIA9bPUnEc16Syywz/Q4iAsE8Gy6l5J41MhA/q2QaO9WSrPE
 Leah53l5EwQRd55WjJkCkIKZwvCjIerkESfAS0oprELIYXaxs/1PbVl6C7VYZA4K
 A5tYLw2vS+tTK4Mgi/ym
 =aw/h
 -----END PGP SIGNATURE-----

Merge tag 'nfc-next-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

Samuel Ortiz says:

====================
NFC 4.4 pull request

This is the NFC pull request for 4.4.

It's a bit bigger than usual, the 3 main culprits being:

- A new driver for Intel's Fields Peak NCI chipset. In order to
  support this chipset we had to export a few NCI routines and
  extend the driver NCI ops to not only support proprietary
  commands but also core ones.

- Support for vendor commands for both STM drivers, st-nci
  and st21nfca. Those vendor commands allow to run factory tests
  through the NFC netlink interface.

- New i2c and SPI support for the Marvell driver, together with
  firmware download support for this driver's core.

Besides that we also have:

- A few file renames in the STM drivers, to keep the naming
  consistent between drivers.

- Some improvements and fixes on the NCI HCI layer, mostly to
  properly reach a secure element over a legacy HCI link.

- A few fixes for the s3fwrn5 and trf7970a drivers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30 20:19:43 +09:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h ASoC: Add ADAU1381/ADAU1781 audio CODEC support 2014-05-27 20:54:51 +01:00
adau1977.h ASoC: Add ADAU1977 CODEC driver 2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h ASoC: Samsung: Add quirk for internal DMA 2014-11-07 10:38:17 +00:00
asoc-s3c24xx_simtec.h ASoC: s3c24xx: Remove invalid file reference 2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h 2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion 2014-01-07 15:36:09 +00:00
at24.h misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
at91_adc.h iio: adc: at91_adc: Add support for touchscreens without TSMR 2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel.h can: at91: remove at91_can_data 2015-10-13 17:42:35 +02:00
atmel_mxt_ts.h Input: atmel_mxt_ts - use deep sleep mode when stopped 2015-08-04 17:03:52 -07:00
bcmgenet.h net: bcmgenet: enable driver to work without a device tree 2014-12-08 20:26:59 -05:00
bd6107.h
bfin_rotary.h Input: bfin_rotary - move pin lists into into platform data 2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h brcmfmac: abstract tx packet processing functions 2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h staging/bluetooth: Add hci_h4p driver 2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h [media] V4L2: mx3_camera: add support for asynchronous subdevice registration 2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h [media] V4L2: soc_camera: Renesas R-Car VIN driver 2013-08-18 09:01:10 -03:00
clk-integrator.h ARM: integrator: switch to fetch clocks from device tree 2014-02-13 11:20:42 +01:00
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h clk/ARM: move Ux500 PRCC bases to the device tree 2015-08-24 16:49:14 -07:00
coda.h
cpuidle-exynos.h cpuidle: exynos: add coupled cpuidle support for exynos4210 2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h ASoC: davinci-mcasp: Rename platform data struct 2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h dmaengine: dw: define DW_DMA_MAX_NR_MASTERS 2015-02-04 22:39:44 -08:00
dma-ep93xx.h
dma-hsu.h dmaengine: append hsu DMA driver 2015-03-07 03:23:02 +01:00
dma-imx-sdma.h dmaengine: imx-sdma: Add support for version 3 firmware 2015-03-18 13:53:33 +05:30
dma-imx.h dmaengine: imx-sdma: Add a new DMATYPE for SAI 2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h dma: mmp_tdma: Fix build for ARM64 2015-02-03 17:47:35 -08:00
dma-mv_xor.h dma: mv_xor: Cleanup in dma-mv_xor.h header 2014-01-13 13:30:31 +05:30
dma-rcar-hpbdma.h dma: add driver for R-Car HPB-DMAC 2013-09-02 17:35:55 +05:30
dma-s3c24xx.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h Input: drv260x - add TI drv260x haptics driver 2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue 2014-07-28 17:03:13 +05:30
efm32-spi.h spi: new controller driver for efm32 SoCs 2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h nand: omap2: Remove horrible ifdefs to fix module probe 2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h net: Cleanup in eth-netx.h 2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h
gpio-ath79.h MIPS: ath79: Add OF support to the GPIO driver 2015-06-21 21:54:09 +02:00
gpio-davinci.h gpio: remove obsolete tnetv107x driver 2014-03-05 10:44:44 +08:00
gpio-dwapb.h GPIO: gpio-dwapb: Enable platform driver binding to MFD driver 2014-09-23 17:51:37 +02:00
gpio-lpc32xx.h ARM: lpc32xx: move custom GPIO header 2013-12-03 11:26:06 +01:00
gpio-omap.h gpio: omap: Allow building as a loadable module 2015-05-06 15:23:03 +02:00
gpio-rcar.h
gpio-ts5500.h
gpio_backlight.h
hsmmc-omap.h ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin 2015-03-27 12:19:37 +01:00
hwmon-s3c.h hwmon: (s3c) Trivial cleanup in hwmon-s3c.h 2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery 2015-04-10 17:57:28 +02:00
i2c-designware.h i2c: designware: add support of platform data to set I2C mode 2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-mux-reg.h i2c: mux: Add register-based mux i2c-mux-reg 2015-08-24 14:05:18 +02:00
i2c-nuc900.h
i2c-s3c2410.h i2c: s3c2410: Trivial cleanup in header file 2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h iommu/omap: Remove platform data da_start and da_end fields 2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h arm: sa1100: move irda header to linux/platform_data 2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h
isl9305.h regulator: isl9305: Add Intersil ISL9305/H driver 2014-09-06 12:43:05 +01:00
itco_wdt.h mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data 2015-08-11 15:03:21 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h Input: update email-id of Rajeev Kumar 2015-05-22 10:59:55 -07:00
keypad-ep93xx.h Input: keypad-ep93xx - cleanup header file 2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h Input: keypad-omap - cleanup header file 2013-12-27 17:20:22 -08:00
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h leds: kirkwood: Cleanup in header files 2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h leds: leds-ns2: move LED modes mapping outside of the driver 2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h leds: lp55xx: handle enable pin in driver 2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h leds-pca9633: Rename to leds-pca963x 2013-08-26 17:22:14 -07:00
leds-s3c24xx.h leds: leds-s3c24xx: Trivial cleanup in header file 2014-02-27 09:57:11 -08:00
lm3630a_bl.h backlight: lm3630: apply chip revision 2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h backlight: lp855x: Use private data for regulator control 2015-08-25 08:40:44 +01:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h net/macb: convert to kernel doc 2015-07-27 01:10:29 -07:00
mailbox-omap.h
max197.h hwmon: (max197) add include guard 2014-01-14 21:36:53 -08:00
max3421-hcd.h usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity 2014-05-29 11:19:30 -07:00
max6697.h
mdio-gpio.h net: mdio-gpio: move platform data header 2015-10-21 19:50:44 -07:00
mfd-mcp-sa11x0.h mfd: Cleanup mfd-mcp-sa11x0.h header 2014-01-21 08:28:59 +00:00
microread.h
mmc-atmel-mci.h mmc: atmel-mci: move mach header to platform_data 2014-11-10 12:40:37 +01:00
mmc-davinci.h
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add tuning-step setting support 2015-08-27 14:50:50 +02:00
mmc-mvsdio.h mmc: mvsdio: Cleanup mmc-mvsdio.h header 2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h mmc: omap_hsmmc: remove prepare/complete system suspend support. 2015-01-19 09:56:08 +01:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif 2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h nand: omap2: Add support for flash-based bad block table 2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding 2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h mtd: nand: s3c2410: Trivial cleanup in header file 2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-orion_nand.h mtd: orion: Cleanup mtd-orion_nand.h header 2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h
nfcmrvl.h NFC: nfcmrvl: add i2c driver 2015-10-27 04:21:14 +01:00
ntc_thermistor.h hwmon: (ntc_thermistor) Add support for ncpXXwf104 2015-05-31 22:58:36 -07:00
nxp-nci.h NFC: nxp-nci: Add support for NXP NCI chips 2015-03-26 11:07:50 +01:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. 2013-09-19 14:37:27 +02:00
pinctrl-single.h pinctrl: single: Add support for auxdata 2013-10-10 15:30:47 -07:00
pixcir_i2c_ts.h Input: pixcir_i2c_ts - switch the device over to gpiod 2015-07-11 17:28:08 -07:00
pn544.h nfc: Fix FSF address in file headers 2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
pxa_sdhci.h mmc: sdhci-pxav3: Move private driver data to driver source 2014-11-10 12:40:31 +01:00
regulator-haptic.h Input: add regulator haptic driver 2014-12-21 18:59:20 -08:00
remoteproc-omap.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h serial: imx: drop support for IRDA 2015-03-07 03:26:32 +01:00
serial-omap.h ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial-sccnxp.h Revert "serial: sccnxp: Add DT support" 2013-08-02 15:25:19 +08:00
sh_ipmmu.h
shmob_drm.h
sht15.h hwmon: (sht15) add include guard 2014-01-14 21:36:53 -08:00
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: Do not pass struct clk in platform_data 2015-05-08 11:22:30 -07:00
simplefb.h fbdev changes for 3.12: 2013-09-05 09:49:32 -07:00
sky81452-backlight.h backlight: Add support Skyworks SKY81452 backlight driver 2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h spi: davinci: Choose correct pre-scaler limit based on SOC 2015-07-24 17:35:51 +01:00
spi-ep93xx.h
spi-imx.h
spi-mt65xx.h spi: mediatek: fix spi incorrect endian usage 2015-08-20 11:09:47 -07:00
spi-nuc900.h spi: nuc900: Cleanup spi-nuc900.h header 2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h spi/s3c64xx: Trivial cleanup in header file 2014-02-16 09:59:13 +08:00
ssm2518.h
st-nci.h NFC: st-nci: Add ese-present/uicc-present dts properties 2015-10-27 03:55:10 +01:00
st21nfca.h NFC: st21nfca: Adding support for secure element 2015-01-28 00:03:36 +01:00
st33zp24.h tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy) 2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_sensors_pdata.h iio: Added ST-sensors platform data to select the DRDY interrupt pin 2013-08-03 18:40:28 +01:00
syscon.h mfd: syscon: Add platform data with a regmap config name 2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h Input: s3c2410 - trivial cleanup in header file 2014-02-14 00:09:43 -08:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h usb: ehci: Cleanup usb-ehci-orion.h header 2014-01-03 12:37:57 -08:00
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h usb: omap1: add extcon to platform data 2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
usb-rcar-phy.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h ARM/fb: ep93xx: switch framebuffer to use modedb only 2015-08-13 12:25:44 +02:00
video-imxfb.h video: imxfb: Remove unused fields from platform data structure 2014-02-28 12:35:22 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h video: pxa: Cleanup video-pxafb.h header 2014-01-17 10:57:42 +02:00
video_s3c.h
voltage-omap.h
wiznet.h
wkup_m3.h remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3 2015-06-17 09:58:08 +03:00
zforce_ts.h Input: zforce_ts - convert to use the gpiod interface 2015-07-08 21:50:57 -07:00