linux_old1/arch/arm/mach-pxa
Mark Brown eae17754ab [ARM] pxa: merge AC97 platform data structures
Currently there are two possible platform datas for the PXA AC97 driver:
one supported by the generic AC97 driver only which provides callbacks
to allow board-specific configuration at stream startup and teardown,
and another for pxa2xx-ac97-lib which allows configuration of the reset
GPIO for PXA2xx CPUs.

Obviously this won't actually work when using the generic AC97 driver
since the drivers will attempt to parse the platform data in both
formats. Fix this by merging the two structures.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15 10:54:06 +08:00
..
include/mach [ARM] pxa: merge AC97 platform data structures 2009-04-15 10:54:06 +08:00
Kconfig [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
Makefile [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
Makefile.boot Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
clock.c [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
clock.h [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
cm-x2xx-pci.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] pxa/cm-x2xx: fix ucb1400 not being registered 2009-04-04 10:26:34 +08:00
cm-x255.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x270.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x300.c [ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms 2009-03-09 21:22:40 +08:00
colibri-pxa3xx.c [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL 2009-04-04 10:26:34 +08:00
colibri-pxa270.c [ARM] pxa: rename colibri.c to colibri-pxa270.c 2009-03-23 09:57:54 +08:00
colibri-pxa300.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
colibri-pxa320.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
corgi.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
cpufreq-pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cpufreq-pxa3xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: add initial support for Cogent CSB726 board 2009-03-13 17:10:44 +08:00
devices.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
devices.h [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
e330.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e350.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e400.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e740.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e750.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e800.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
em-x270.c [ARM] pxa/em-x270: remove duplicated #include 2009-04-14 22:55:36 +08:00
eseries.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: add missing declaration of pxa26x_init_irq() 2009-04-13 12:10:36 +08:00
gumstix.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
h5000.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
himalaya.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
imote2.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
irq.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c [ARM] 5251/1: remove old LED support for Trizeps4 SOM 2008-10-01 22:34:34 +01:00
leds.h fix file specification in comments 2006-10-03 23:01:26 +02:00
littleton.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
lpd270.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
lubbock.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
magician.c Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-06 09:57:38 +01:00
mainstone.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
mfp-pxa2xx.c [ARM] pxa: access GPIO registers by chip so to make it further generic 2009-03-09 21:22:38 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
mioa701_bootresume.S [ARM] pxa/MioA701: fix memory corruption. 2008-11-22 20:57:21 +08:00
mp900.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
palmld.c [ARM] pxa: Add support for suspend on PalmTX, T5 and LD 2009-04-04 10:26:34 +08:00
palmt5.c [ARM] pxa: PalmTX and PalmT5 USB fixes 2009-04-13 12:10:58 +08:00
palmte2.c [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight 2009-04-04 10:26:33 +08:00
palmtx.c [ARM] pxa: PalmTX and PalmT5 USB fixes 2009-04-13 12:10:58 +08:00
palmz72.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm027.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm990-baseboard.c V4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link 2009-03-30 12:43:22 -03:00
pm.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
poodle.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
pwm.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa3xx.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa25x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa27x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa300.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa320.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa930.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
reset.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
saar.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sharpsl_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
spitz_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
ssp.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
tavorevb.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
time.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
tosa-bt.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
tosa.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
trizeps4.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
viper.c [ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.c 2009-03-09 21:22:39 +08:00
zylonite.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
zylonite_pxa300.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
zylonite_pxa320.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00