318 lines
8.8 KiB
C
318 lines
8.8 KiB
C
/*
|
|
* cx18 ADEC VBI functions
|
|
*
|
|
* Derived from cx25840-vbi.c
|
|
*
|
|
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
|
|
#include "cx18-driver.h"
|
|
|
|
/*
|
|
* For sliced VBI output, we set up to use VIP-1.1, 8-bit mode,
|
|
* NN counts 1 byte Dwords, an IDID with the VBI line # in it.
|
|
* Thus, according to the VIP-2 Spec, our VBI ancillary data lines
|
|
* (should!) look like:
|
|
* 4 byte EAV code: 0xff 0x00 0x00 0xRP
|
|
* unknown number of possible idle bytes
|
|
* 3 byte Anc data preamble: 0x00 0xff 0xff
|
|
* 1 byte data identifier: ne010iii (parity bits, 010, DID bits)
|
|
* 1 byte secondary data id: nessssss (parity bits, SDID bits)
|
|
* 1 byte data word count: necccccc (parity bits, NN Dword count)
|
|
* 2 byte Internal DID: VBI-line-# 0x80
|
|
* NN data bytes
|
|
* 1 byte checksum
|
|
* Fill bytes needed to fil out to 4*NN bytes of payload
|
|
*
|
|
* The RP codes for EAVs when in VIP-1.1 mode, not in raw mode, &
|
|
* in the vertical blanking interval are:
|
|
* 0xb0 (Task 0 VerticalBlank HorizontalBlank 0 0 0 0)
|
|
* 0xf0 (Task EvenField VerticalBlank HorizontalBlank 0 0 0 0)
|
|
*
|
|
* Since the V bit is only allowed to toggle in the EAV RP code, just
|
|
* before the first active region line and for active lines, they are:
|
|
* 0x90 (Task 0 0 HorizontalBlank 0 0 0 0)
|
|
* 0xd0 (Task EvenField 0 HorizontalBlank 0 0 0 0)
|
|
*
|
|
* The user application DID bytes we care about are:
|
|
* 0x91 (1 0 010 0 !ActiveLine AncDataPresent)
|
|
* 0x55 (0 1 010 2ndField !ActiveLine AncDataPresent)
|
|
*
|
|
*/
|
|
static const u8 sliced_vbi_did[2] = { 0x91, 0x55 };
|
|
|
|
struct vbi_anc_data {
|
|
/* u8 eav[4]; */
|
|
/* u8 idle[]; Variable number of idle bytes */
|
|
u8 preamble[3];
|
|
u8 did;
|
|
u8 sdid;
|
|
u8 data_count;
|
|
u8 idid[2];
|
|
u8 payload[1]; /* data_count of payload */
|
|
/* u8 checksum; */
|
|
/* u8 fill[]; Variable number of fill bytes */
|
|
};
|
|
|
|
static int odd_parity(u8 c)
|
|
{
|
|
c ^= (c >> 4);
|
|
c ^= (c >> 2);
|
|
c ^= (c >> 1);
|
|
|
|
return c & 1;
|
|
}
|
|
|
|
static int decode_vps(u8 *dst, u8 *p)
|
|
{
|
|
static const u8 biphase_tbl[] = {
|
|
0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
|
|
0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
|
|
0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
|
|
0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
|
|
0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
|
|
0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
|
|
0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
|
|
0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
|
|
0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
|
|
0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
|
|
0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
|
|
0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
|
|
0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
|
|
0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
|
|
0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
|
|
0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
|
|
0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
|
|
0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
|
|
0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
|
|
0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
|
|
0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
|
|
0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
|
|
0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
|
|
0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
|
|
0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
|
|
0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
|
|
0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
|
|
0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
|
|
0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
|
|
0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
|
|
0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
|
|
0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
|
|
};
|
|
|
|
u8 c, err = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < 2 * 13; i += 2) {
|
|
err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
|
|
c = (biphase_tbl[p[i + 1]] & 0xf) |
|
|
((biphase_tbl[p[i]] & 0xf) << 4);
|
|
dst[i / 2] = c;
|
|
}
|
|
|
|
return err & 0xf0;
|
|
}
|
|
|
|
int cx18_av_vbi_g_fmt(struct cx18 *cx, struct v4l2_format *fmt)
|
|
{
|
|
struct cx18_av_state *state = &cx->av_state;
|
|
struct v4l2_sliced_vbi_format *svbi;
|
|
static const u16 lcr2vbi[] = {
|
|
0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */
|
|
0, V4L2_SLICED_WSS_625, 0, /* 4 */
|
|
V4L2_SLICED_CAPTION_525, /* 6 */
|
|
0, 0, V4L2_SLICED_VPS, 0, 0, /* 9 */
|
|
0, 0, 0, 0
|
|
};
|
|
int is_pal = !(state->std & V4L2_STD_525_60);
|
|
int i;
|
|
|
|
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
|
|
return -EINVAL;
|
|
svbi = &fmt->fmt.sliced;
|
|
memset(svbi, 0, sizeof(*svbi));
|
|
/* we're done if raw VBI is active */
|
|
if ((cx18_av_read(cx, 0x404) & 0x10) == 0)
|
|
return 0;
|
|
|
|
if (is_pal) {
|
|
for (i = 7; i <= 23; i++) {
|
|
u8 v = cx18_av_read(cx, 0x424 + i - 7);
|
|
|
|
svbi->service_lines[0][i] = lcr2vbi[v >> 4];
|
|
svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
|
|
svbi->service_set |= svbi->service_lines[0][i] |
|
|
svbi->service_lines[1][i];
|
|
}
|
|
} else {
|
|
for (i = 10; i <= 21; i++) {
|
|
u8 v = cx18_av_read(cx, 0x424 + i - 10);
|
|
|
|
svbi->service_lines[0][i] = lcr2vbi[v >> 4];
|
|
svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
|
|
svbi->service_set |= svbi->service_lines[0][i] |
|
|
svbi->service_lines[1][i];
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int cx18_av_vbi_s_fmt(struct cx18 *cx, struct v4l2_format *fmt)
|
|
{
|
|
struct cx18_av_state *state = &cx->av_state;
|
|
struct v4l2_sliced_vbi_format *svbi;
|
|
int is_pal = !(state->std & V4L2_STD_525_60);
|
|
int i, x;
|
|
u8 lcr[24];
|
|
|
|
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE &&
|
|
fmt->type != V4L2_BUF_TYPE_VBI_CAPTURE)
|
|
return -EINVAL;
|
|
svbi = &fmt->fmt.sliced;
|
|
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
|
|
/* raw VBI */
|
|
memset(svbi, 0, sizeof(*svbi));
|
|
|
|
/* Setup standard */
|
|
cx18_av_std_setup(cx);
|
|
|
|
/* VBI Offset */
|
|
cx18_av_write(cx, 0x47f, state->slicer_line_delay);
|
|
cx18_av_write(cx, 0x404, 0x2e);
|
|
return 0;
|
|
}
|
|
|
|
for (x = 0; x <= 23; x++)
|
|
lcr[x] = 0x00;
|
|
|
|
/* Setup standard */
|
|
cx18_av_std_setup(cx);
|
|
|
|
/* Sliced VBI */
|
|
cx18_av_write(cx, 0x404, 0x32); /* Ancillary data */
|
|
cx18_av_write(cx, 0x406, 0x13);
|
|
cx18_av_write(cx, 0x47f, state->slicer_line_delay);
|
|
|
|
/* Force impossible lines to 0 */
|
|
if (is_pal) {
|
|
for (i = 0; i <= 6; i++)
|
|
svbi->service_lines[0][i] =
|
|
svbi->service_lines[1][i] = 0;
|
|
} else {
|
|
for (i = 0; i <= 9; i++)
|
|
svbi->service_lines[0][i] =
|
|
svbi->service_lines[1][i] = 0;
|
|
|
|
for (i = 22; i <= 23; i++)
|
|
svbi->service_lines[0][i] =
|
|
svbi->service_lines[1][i] = 0;
|
|
}
|
|
|
|
/* Build register values for requested service lines */
|
|
for (i = 7; i <= 23; i++) {
|
|
for (x = 0; x <= 1; x++) {
|
|
switch (svbi->service_lines[1-x][i]) {
|
|
case V4L2_SLICED_TELETEXT_B:
|
|
lcr[i] |= 1 << (4 * x);
|
|
break;
|
|
case V4L2_SLICED_WSS_625:
|
|
lcr[i] |= 4 << (4 * x);
|
|
break;
|
|
case V4L2_SLICED_CAPTION_525:
|
|
lcr[i] |= 6 << (4 * x);
|
|
break;
|
|
case V4L2_SLICED_VPS:
|
|
lcr[i] |= 9 << (4 * x);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (is_pal) {
|
|
for (x = 1, i = 0x424; i <= 0x434; i++, x++)
|
|
cx18_av_write(cx, i, lcr[6 + x]);
|
|
} else {
|
|
for (x = 1, i = 0x424; i <= 0x430; i++, x++)
|
|
cx18_av_write(cx, i, lcr[9 + x]);
|
|
for (i = 0x431; i <= 0x434; i++)
|
|
cx18_av_write(cx, i, 0);
|
|
}
|
|
|
|
cx18_av_write(cx, 0x43c, 0x16);
|
|
/* Should match vblank set in cx18_av_std_setup() */
|
|
cx18_av_write(cx, 0x474, is_pal ? 38 : 26);
|
|
return 0;
|
|
}
|
|
|
|
int cx18_av_decode_vbi_line(struct v4l2_subdev *sd,
|
|
struct v4l2_decode_vbi_line *vbi)
|
|
{
|
|
struct cx18 *cx = v4l2_get_subdevdata(sd);
|
|
struct cx18_av_state *state = &cx->av_state;
|
|
struct vbi_anc_data *anc = (struct vbi_anc_data *)vbi->p;
|
|
u8 *p;
|
|
int did, sdid, l, err = 0;
|
|
|
|
/*
|
|
* Check for the ancillary data header for sliced VBI
|
|
*/
|
|
if (anc->preamble[0] ||
|
|
anc->preamble[1] != 0xff || anc->preamble[2] != 0xff ||
|
|
(anc->did != sliced_vbi_did[0] &&
|
|
anc->did != sliced_vbi_did[1])) {
|
|
vbi->line = vbi->type = 0;
|
|
return 0;
|
|
}
|
|
|
|
did = anc->did;
|
|
sdid = anc->sdid & 0xf;
|
|
l = anc->idid[0] & 0x3f;
|
|
l += state->slicer_line_offset;
|
|
p = anc->payload;
|
|
|
|
/* Decode the SDID set by the slicer */
|
|
switch (sdid) {
|
|
case 1:
|
|
sdid = V4L2_SLICED_TELETEXT_B;
|
|
break;
|
|
case 4:
|
|
sdid = V4L2_SLICED_WSS_625;
|
|
break;
|
|
case 6:
|
|
sdid = V4L2_SLICED_CAPTION_525;
|
|
err = !odd_parity(p[0]) || !odd_parity(p[1]);
|
|
break;
|
|
case 9:
|
|
sdid = V4L2_SLICED_VPS;
|
|
if (decode_vps(p, p) != 0)
|
|
err = 1;
|
|
break;
|
|
default:
|
|
sdid = 0;
|
|
err = 1;
|
|
break;
|
|
}
|
|
|
|
vbi->type = err ? 0 : sdid;
|
|
vbi->line = err ? 0 : l;
|
|
vbi->is_second_field = err ? 0 : (did == sliced_vbi_did[1]);
|
|
vbi->p = p;
|
|
return 0;
|
|
}
|