738 lines
17 KiB
C
738 lines
17 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/z2.c
|
|
*
|
|
* Support for the Zipit Z2 Handheld device.
|
|
*
|
|
* Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on research and code by: Ken McGuire
|
|
* Based on mainstone.c as modified for the Zipit Z2.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/pwm_backlight.h>
|
|
#include <linux/z2_battery.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/pxa2xx_spi.h>
|
|
#include <linux/spi/libertas_spi.h>
|
|
#include <linux/spi/lms283gf05.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include "pxa27x.h"
|
|
#include "mfp-pxa27x.h"
|
|
#include <mach/z2.h>
|
|
#include <linux/platform_data/video-pxafb.h>
|
|
#include <linux/platform_data/mmc-pxamci.h>
|
|
#include <linux/platform_data/keypad-pxa27x.h>
|
|
#include "pm.h"
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
/******************************************************************************
|
|
* Pin configuration
|
|
******************************************************************************/
|
|
static unsigned long z2_pin_config[] = {
|
|
|
|
/* LCD - 16bpp Active TFT */
|
|
GPIO58_LCD_LDD_0,
|
|
GPIO59_LCD_LDD_1,
|
|
GPIO60_LCD_LDD_2,
|
|
GPIO61_LCD_LDD_3,
|
|
GPIO62_LCD_LDD_4,
|
|
GPIO63_LCD_LDD_5,
|
|
GPIO64_LCD_LDD_6,
|
|
GPIO65_LCD_LDD_7,
|
|
GPIO66_LCD_LDD_8,
|
|
GPIO67_LCD_LDD_9,
|
|
GPIO68_LCD_LDD_10,
|
|
GPIO69_LCD_LDD_11,
|
|
GPIO70_LCD_LDD_12,
|
|
GPIO71_LCD_LDD_13,
|
|
GPIO72_LCD_LDD_14,
|
|
GPIO73_LCD_LDD_15,
|
|
GPIO74_LCD_FCLK,
|
|
GPIO75_LCD_LCLK,
|
|
GPIO76_LCD_PCLK,
|
|
GPIO77_LCD_BIAS,
|
|
GPIO19_GPIO, /* LCD reset */
|
|
GPIO88_GPIO, /* LCD chipselect */
|
|
|
|
/* PWM */
|
|
GPIO115_PWM1_OUT, /* Keypad Backlight */
|
|
GPIO11_PWM2_OUT, /* LCD Backlight */
|
|
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO96_GPIO, /* SD detect */
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* Keypad */
|
|
GPIO100_KP_MKIN_0,
|
|
GPIO101_KP_MKIN_1,
|
|
GPIO102_KP_MKIN_2,
|
|
GPIO34_KP_MKIN_3,
|
|
GPIO38_KP_MKIN_4,
|
|
GPIO16_KP_MKIN_5,
|
|
GPIO17_KP_MKIN_6,
|
|
GPIO103_KP_MKOUT_0,
|
|
GPIO104_KP_MKOUT_1,
|
|
GPIO105_KP_MKOUT_2,
|
|
GPIO106_KP_MKOUT_3,
|
|
GPIO107_KP_MKOUT_4,
|
|
GPIO108_KP_MKOUT_5,
|
|
GPIO35_KP_MKOUT_6,
|
|
GPIO41_KP_MKOUT_7,
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* SSP1 */
|
|
GPIO23_SSP1_SCLK, /* SSP1_SCK */
|
|
GPIO25_SSP1_TXD, /* SSP1_TXD */
|
|
GPIO26_SSP1_RXD, /* SSP1_RXD */
|
|
|
|
/* SSP2 */
|
|
GPIO22_SSP2_SCLK, /* SSP2_SCK */
|
|
GPIO13_SSP2_TXD, /* SSP2_TXD */
|
|
GPIO40_SSP2_RXD, /* SSP2_RXD */
|
|
|
|
/* LEDs */
|
|
GPIO10_GPIO, /* WiFi LED */
|
|
GPIO83_GPIO, /* Charging LED */
|
|
GPIO85_GPIO, /* Charged LED */
|
|
|
|
/* I2S */
|
|
GPIO28_I2S_BITCLK_OUT,
|
|
GPIO29_I2S_SDATA_IN,
|
|
GPIO30_I2S_SDATA_OUT,
|
|
GPIO31_I2S_SYNC,
|
|
GPIO113_I2S_SYSCLK,
|
|
|
|
/* MISC */
|
|
GPIO0_GPIO, /* AC power detect */
|
|
GPIO1_GPIO, /* Power button */
|
|
GPIO37_GPIO, /* Headphone detect */
|
|
GPIO98_GPIO, /* Lid switch */
|
|
GPIO14_GPIO, /* WiFi Power */
|
|
GPIO24_GPIO, /* WiFi CS */
|
|
GPIO36_GPIO, /* WiFi IRQ */
|
|
GPIO88_GPIO, /* LCD CS */
|
|
};
|
|
|
|
/******************************************************************************
|
|
* NOR Flash
|
|
******************************************************************************/
|
|
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
|
|
static struct resource z2_flash_resource = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_8M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct mtd_partition z2_flash_parts[] = {
|
|
{
|
|
.name = "U-Boot Bootloader",
|
|
.offset = 0x0,
|
|
.size = 0x40000,
|
|
}, {
|
|
.name = "U-Boot Environment",
|
|
.offset = 0x40000,
|
|
.size = 0x20000,
|
|
}, {
|
|
.name = "Flash",
|
|
.offset = 0x60000,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data z2_flash_data = {
|
|
.width = 2,
|
|
.parts = z2_flash_parts,
|
|
.nr_parts = ARRAY_SIZE(z2_flash_parts),
|
|
};
|
|
|
|
static struct platform_device z2_flash = {
|
|
.name = "physmap-flash",
|
|
.id = -1,
|
|
.resource = &z2_flash_resource,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &z2_flash_data,
|
|
},
|
|
};
|
|
|
|
static void __init z2_nor_init(void)
|
|
{
|
|
platform_device_register(&z2_flash);
|
|
}
|
|
#else
|
|
static inline void z2_nor_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Backlight
|
|
******************************************************************************/
|
|
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
|
|
static struct pwm_lookup z2_pwm_lookup[] = {
|
|
PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
|
|
PWM_POLARITY_NORMAL),
|
|
PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data z2_backlight_data[] = {
|
|
[0] = {
|
|
/* Keypad Backlight */
|
|
.max_brightness = 1023,
|
|
.dft_brightness = 0,
|
|
.enable_gpio = -1,
|
|
},
|
|
[1] = {
|
|
/* LCD Backlight */
|
|
.max_brightness = 1023,
|
|
.dft_brightness = 512,
|
|
.enable_gpio = -1,
|
|
},
|
|
};
|
|
|
|
static struct platform_device z2_backlight_devices[2] = {
|
|
{
|
|
.name = "pwm-backlight",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &z2_backlight_data[1],
|
|
},
|
|
},
|
|
{
|
|
.name = "pwm-backlight",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &z2_backlight_data[0],
|
|
},
|
|
},
|
|
};
|
|
static void __init z2_pwm_init(void)
|
|
{
|
|
pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
|
|
platform_device_register(&z2_backlight_devices[0]);
|
|
platform_device_register(&z2_backlight_devices[1]);
|
|
}
|
|
#else
|
|
static inline void z2_pwm_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Framebuffer
|
|
******************************************************************************/
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
static struct pxafb_mode_info z2_lcd_modes[] = {
|
|
{
|
|
.pixclock = 192000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
|
|
.left_margin = 4,
|
|
.right_margin = 8,
|
|
.upper_margin = 4,
|
|
.lower_margin = 8,
|
|
|
|
.hsync_len = 4,
|
|
.vsync_len = 4,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info z2_lcd_screen = {
|
|
.modes = z2_lcd_modes,
|
|
.num_modes = ARRAY_SIZE(z2_lcd_modes),
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
static void __init z2_lcd_init(void)
|
|
{
|
|
pxa_set_fb_info(NULL, &z2_lcd_screen);
|
|
}
|
|
#else
|
|
static inline void z2_lcd_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* SD/MMC card controller
|
|
******************************************************************************/
|
|
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
|
|
static struct pxamci_platform_data z2_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.gpio_card_detect = GPIO96_ZIPITZ2_SD_DETECT,
|
|
.gpio_power = -1,
|
|
.gpio_card_ro = -1,
|
|
.detect_delay_ms = 200,
|
|
};
|
|
|
|
static void __init z2_mmc_init(void)
|
|
{
|
|
pxa_set_mci_info(&z2_mci_platform_data);
|
|
}
|
|
#else
|
|
static inline void z2_mmc_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* LEDs
|
|
******************************************************************************/
|
|
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
|
|
struct gpio_led z2_gpio_leds[] = {
|
|
{
|
|
.name = "z2:green:wifi",
|
|
.default_trigger = "none",
|
|
.gpio = GPIO10_ZIPITZ2_LED_WIFI,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "z2:green:charged",
|
|
.default_trigger = "mmc0",
|
|
.gpio = GPIO85_ZIPITZ2_LED_CHARGED,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "z2:amber:charging",
|
|
.default_trigger = "Z2-charging-or-full",
|
|
.gpio = GPIO83_ZIPITZ2_LED_CHARGING,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data z2_gpio_led_info = {
|
|
.leds = z2_gpio_leds,
|
|
.num_leds = ARRAY_SIZE(z2_gpio_leds),
|
|
};
|
|
|
|
static struct platform_device z2_leds = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &z2_gpio_led_info,
|
|
}
|
|
};
|
|
|
|
static void __init z2_leds_init(void)
|
|
{
|
|
platform_device_register(&z2_leds);
|
|
}
|
|
#else
|
|
static inline void z2_leds_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* GPIO keyboard
|
|
******************************************************************************/
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static const unsigned int z2_matrix_keys[] = {
|
|
KEY(0, 0, KEY_OPTION),
|
|
KEY(1, 0, KEY_UP),
|
|
KEY(2, 0, KEY_DOWN),
|
|
KEY(3, 0, KEY_LEFT),
|
|
KEY(4, 0, KEY_RIGHT),
|
|
KEY(5, 0, KEY_END),
|
|
KEY(6, 0, KEY_KPPLUS),
|
|
|
|
KEY(0, 1, KEY_HOME),
|
|
KEY(1, 1, KEY_Q),
|
|
KEY(2, 1, KEY_I),
|
|
KEY(3, 1, KEY_G),
|
|
KEY(4, 1, KEY_X),
|
|
KEY(5, 1, KEY_ENTER),
|
|
KEY(6, 1, KEY_KPMINUS),
|
|
|
|
KEY(0, 2, KEY_PAGEUP),
|
|
KEY(1, 2, KEY_W),
|
|
KEY(2, 2, KEY_O),
|
|
KEY(3, 2, KEY_H),
|
|
KEY(4, 2, KEY_C),
|
|
KEY(5, 2, KEY_LEFTALT),
|
|
|
|
KEY(0, 3, KEY_PAGEDOWN),
|
|
KEY(1, 3, KEY_E),
|
|
KEY(2, 3, KEY_P),
|
|
KEY(3, 3, KEY_J),
|
|
KEY(4, 3, KEY_V),
|
|
KEY(5, 3, KEY_LEFTSHIFT),
|
|
|
|
KEY(0, 4, KEY_ESC),
|
|
KEY(1, 4, KEY_R),
|
|
KEY(2, 4, KEY_A),
|
|
KEY(3, 4, KEY_K),
|
|
KEY(4, 4, KEY_B),
|
|
KEY(5, 4, KEY_LEFTCTRL),
|
|
|
|
KEY(0, 5, KEY_TAB),
|
|
KEY(1, 5, KEY_T),
|
|
KEY(2, 5, KEY_S),
|
|
KEY(3, 5, KEY_L),
|
|
KEY(4, 5, KEY_N),
|
|
KEY(5, 5, KEY_SPACE),
|
|
|
|
KEY(0, 6, KEY_STOPCD),
|
|
KEY(1, 6, KEY_Y),
|
|
KEY(2, 6, KEY_D),
|
|
KEY(3, 6, KEY_BACKSPACE),
|
|
KEY(4, 6, KEY_M),
|
|
KEY(5, 6, KEY_COMMA),
|
|
|
|
KEY(0, 7, KEY_PLAYCD),
|
|
KEY(1, 7, KEY_U),
|
|
KEY(2, 7, KEY_F),
|
|
KEY(3, 7, KEY_Z),
|
|
KEY(4, 7, KEY_SEMICOLON),
|
|
KEY(5, 7, KEY_DOT),
|
|
};
|
|
|
|
static struct matrix_keymap_data z2_matrix_keymap_data = {
|
|
.keymap = z2_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(z2_matrix_keys),
|
|
};
|
|
|
|
static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
|
|
.matrix_key_rows = 7,
|
|
.matrix_key_cols = 8,
|
|
.matrix_keymap_data = &z2_matrix_keymap_data,
|
|
|
|
.debounce_interval = 30,
|
|
};
|
|
|
|
static void __init z2_mkp_init(void)
|
|
{
|
|
pxa_set_keypad_info(&z2_keypad_platform_data);
|
|
}
|
|
#else
|
|
static inline void z2_mkp_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* GPIO keys
|
|
******************************************************************************/
|
|
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
|
static struct gpio_keys_button z2_pxa_buttons[] = {
|
|
{
|
|
.code = KEY_POWER,
|
|
.gpio = GPIO1_ZIPITZ2_POWER_BUTTON,
|
|
.active_low = 0,
|
|
.desc = "Power Button",
|
|
.wakeup = 1,
|
|
.type = EV_KEY,
|
|
},
|
|
{
|
|
.code = SW_LID,
|
|
.gpio = GPIO98_ZIPITZ2_LID_BUTTON,
|
|
.active_low = 1,
|
|
.desc = "Lid Switch",
|
|
.wakeup = 0,
|
|
.type = EV_SW,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data z2_pxa_keys_data = {
|
|
.buttons = z2_pxa_buttons,
|
|
.nbuttons = ARRAY_SIZE(z2_pxa_buttons),
|
|
};
|
|
|
|
static struct platform_device z2_pxa_keys = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &z2_pxa_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init z2_keys_init(void)
|
|
{
|
|
platform_device_register(&z2_pxa_keys);
|
|
}
|
|
#else
|
|
static inline void z2_keys_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Battery
|
|
******************************************************************************/
|
|
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
|
|
static struct z2_battery_info batt_chip_info = {
|
|
.batt_I2C_bus = 0,
|
|
.batt_I2C_addr = 0x55,
|
|
.batt_I2C_reg = 2,
|
|
.charge_gpio = GPIO0_ZIPITZ2_AC_DETECT,
|
|
.min_voltage = 3475000,
|
|
.max_voltage = 4190000,
|
|
.batt_div = 59,
|
|
.batt_mult = 1000000,
|
|
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LION,
|
|
.batt_name = "Z2",
|
|
};
|
|
|
|
static struct i2c_board_info __initdata z2_i2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("aer915", 0x55),
|
|
.platform_data = &batt_chip_info,
|
|
}, {
|
|
I2C_BOARD_INFO("wm8750", 0x1b),
|
|
},
|
|
|
|
};
|
|
|
|
static void __init z2_i2c_init(void)
|
|
{
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
|
|
}
|
|
#else
|
|
static inline void z2_i2c_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* SSP Devices - WiFi and LCD control
|
|
******************************************************************************/
|
|
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
|
|
/* WiFi */
|
|
static int z2_lbs_spi_setup(struct spi_device *spi)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
|
|
if (ret)
|
|
goto err2;
|
|
|
|
/* Wait until card is powered on */
|
|
mdelay(180);
|
|
|
|
spi->bits_per_word = 16;
|
|
spi->mode = SPI_MODE_2,
|
|
|
|
spi_setup(spi);
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
|
|
err:
|
|
return ret;
|
|
};
|
|
|
|
static int z2_lbs_spi_teardown(struct spi_device *spi)
|
|
{
|
|
gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
|
|
gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip z2_lbs_chip_info = {
|
|
.rx_threshold = 8,
|
|
.tx_threshold = 8,
|
|
.timeout = 1000,
|
|
.gpio_cs = GPIO24_ZIPITZ2_WIFI_CS,
|
|
};
|
|
|
|
static struct libertas_spi_platform_data z2_lbs_pdata = {
|
|
.use_dummy_writes = 1,
|
|
.setup = z2_lbs_spi_setup,
|
|
.teardown = z2_lbs_spi_teardown,
|
|
};
|
|
|
|
/* LCD */
|
|
static struct pxa2xx_spi_chip lms283_chip_info = {
|
|
.rx_threshold = 1,
|
|
.tx_threshold = 1,
|
|
.timeout = 64,
|
|
.gpio_cs = GPIO88_ZIPITZ2_LCD_CS,
|
|
};
|
|
|
|
static const struct lms283gf05_pdata lms283_pdata = {
|
|
.reset_gpio = GPIO19_ZIPITZ2_LCD_RESET,
|
|
};
|
|
|
|
static struct spi_board_info spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "libertas_spi",
|
|
.platform_data = &z2_lbs_pdata,
|
|
.controller_data = &z2_lbs_chip_info,
|
|
.irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
|
|
.max_speed_hz = 13000000,
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
},
|
|
{
|
|
.modalias = "lms283gf05",
|
|
.controller_data = &lms283_chip_info,
|
|
.platform_data = &lms283_pdata,
|
|
.max_speed_hz = 400000,
|
|
.bus_num = 2,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp1_master_info = {
|
|
.num_chipselect = 1,
|
|
.enable_dma = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp2_master_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static void __init z2_spi_init(void)
|
|
{
|
|
pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
|
|
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
|
|
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
|
}
|
|
#else
|
|
static inline void z2_spi_init(void) {}
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Core power regulator
|
|
******************************************************************************/
|
|
#if defined(CONFIG_REGULATOR_TPS65023) || \
|
|
defined(CONFIG_REGULATOR_TPS65023_MODULE)
|
|
static struct regulator_consumer_supply z2_tps65021_consumers[] = {
|
|
REGULATOR_SUPPLY("vcc_core", NULL),
|
|
};
|
|
|
|
static struct regulator_init_data z2_tps65021_info[] = {
|
|
{
|
|
.constraints = {
|
|
.name = "vcc_core range",
|
|
.min_uV = 800000,
|
|
.max_uV = 1600000,
|
|
.always_on = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
|
|
},
|
|
.consumer_supplies = z2_tps65021_consumers,
|
|
.num_consumer_supplies = ARRAY_SIZE(z2_tps65021_consumers),
|
|
}, {
|
|
.constraints = {
|
|
.name = "DCDC2",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.always_on = 1,
|
|
},
|
|
}, {
|
|
.constraints = {
|
|
.name = "DCDC3",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.always_on = 1,
|
|
},
|
|
}, {
|
|
.constraints = {
|
|
.name = "LDO1",
|
|
.min_uV = 1000000,
|
|
.max_uV = 3150000,
|
|
.always_on = 1,
|
|
},
|
|
}, {
|
|
.constraints = {
|
|
.name = "LDO2",
|
|
.min_uV = 1050000,
|
|
.max_uV = 3300000,
|
|
.always_on = 1,
|
|
},
|
|
}
|
|
};
|
|
|
|
static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("tps65021", 0x48),
|
|
.platform_data = &z2_tps65021_info,
|
|
},
|
|
};
|
|
|
|
static void __init z2_pmic_init(void)
|
|
{
|
|
pxa27x_set_i2c_power_info(NULL);
|
|
i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
|
|
}
|
|
#else
|
|
static inline void z2_pmic_init(void) {}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static void z2_power_off(void)
|
|
{
|
|
/* We're using deep sleep as poweroff, so clear PSPR to ensure that
|
|
* bootloader will jump to its entry point in resume handler
|
|
*/
|
|
PSPR = 0x0;
|
|
local_irq_disable();
|
|
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
|
|
pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
|
|
}
|
|
#else
|
|
#define z2_power_off NULL
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* Machine init
|
|
******************************************************************************/
|
|
static void __init z2_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
z2_lcd_init();
|
|
z2_mmc_init();
|
|
z2_mkp_init();
|
|
z2_i2c_init();
|
|
z2_spi_init();
|
|
z2_nor_init();
|
|
z2_pwm_init();
|
|
z2_leds_init();
|
|
z2_keys_init();
|
|
z2_pmic_init();
|
|
|
|
pm_power_off = z2_power_off;
|
|
}
|
|
|
|
MACHINE_START(ZIPIT2, "Zipit Z2")
|
|
.atag_offset = 0x100,
|
|
.map_io = pxa27x_map_io,
|
|
.nr_irqs = PXA_NR_IRQS,
|
|
.init_irq = pxa27x_init_irq,
|
|
.handle_irq = pxa27x_handle_irq,
|
|
.init_time = pxa_timer_init,
|
|
.init_machine = z2_init,
|
|
.restart = pxa_restart,
|
|
MACHINE_END
|