linux_old1/drivers/iio
Mikko Koivunen f87fa26177 iio: light: rpr0521 disable sensor -bugfix
Sensor was marked enabled on each call even if the call was for disabling
sensor.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:10 +01:00
..
accel iio: hid-sensor-accel-3d: Drop unnecessary static 2017-05-07 13:56:36 +01:00
adc iio: hi8435: cleanup reset gpio 2017-05-20 17:35:52 +01:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical drivers: iio: chemical: replace comma with a semicolon 2017-03-30 19:13:23 +01:00
common iio: hid-sensor-hub: Implement batch mode 2017-05-16 19:44:01 +01:00
counter iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option 2017-03-15 21:59:08 +00:00
dac iio:ad5064: Add support for ltc2633 and similar devices 2017-05-14 16:16:57 +01:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro Fourth set of IIO new device support, features and cleanups for the 4.12 cycle 2017-04-18 17:13:31 +02:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity iio: humidity: hts221: add power management support 2017-05-14 16:52:33 +01:00
imu iio: imu: st_lsm6dsx: add system power management support 2017-04-30 17:55:15 +01:00
light iio: light: rpr0521 disable sensor -bugfix 2017-05-21 15:06:10 +01:00
magnetometer Merge 4.11-rc4 into staging-next 2017-03-27 09:11:25 +02:00
orientation iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support 2017-05-07 12:22:36 +01:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure iio: pressure: zpa2326: report interrupted case as failure 2017-05-14 15:28:14 +01:00
proximity iio: proximity: as3935: move storm out of range check 2017-04-27 07:22:46 +01:00
temperature iio: temperature: maxim_thermocouple: add MAX31856 part 2017-05-07 12:36:41 +01:00
trigger iio: stm32 trigger: Add support for TRGO2 triggers 2017-05-07 16:08:10 +01:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio: core: Fix suspicious sizeof usage 2017-04-27 06:30:52 +01:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: clean up viio_trigger_alloc() 2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: fix a static checker error 2017-04-26 06:04:06 +01:00