783 lines
18 KiB
C
783 lines
18 KiB
C
/*
|
|
* Atheros AR933X SoC built-in UART driver
|
|
*
|
|
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/div64.h>
|
|
|
|
#include <asm/mach-ath79/ar933x_uart.h>
|
|
|
|
#define DRIVER_NAME "ar933x-uart"
|
|
|
|
#define AR933X_UART_MAX_SCALE 0xff
|
|
#define AR933X_UART_MAX_STEP 0xffff
|
|
|
|
#define AR933X_UART_MIN_BAUD 300
|
|
#define AR933X_UART_MAX_BAUD 3000000
|
|
|
|
#define AR933X_DUMMY_STATUS_RD 0x01
|
|
|
|
static struct uart_driver ar933x_uart_driver;
|
|
|
|
struct ar933x_uart_port {
|
|
struct uart_port port;
|
|
unsigned int ier; /* shadow Interrupt Enable Register */
|
|
unsigned int min_baud;
|
|
unsigned int max_baud;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline bool ar933x_uart_console_enabled(void)
|
|
{
|
|
return config_enabled(CONFIG_SERIAL_AR933X_CONSOLE);
|
|
}
|
|
|
|
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
|
|
int offset)
|
|
{
|
|
return readl(up->port.membase + offset);
|
|
}
|
|
|
|
static inline void ar933x_uart_write(struct ar933x_uart_port *up,
|
|
int offset, unsigned int value)
|
|
{
|
|
writel(value, up->port.membase + offset);
|
|
}
|
|
|
|
static inline void ar933x_uart_rmw(struct ar933x_uart_port *up,
|
|
unsigned int offset,
|
|
unsigned int mask,
|
|
unsigned int val)
|
|
{
|
|
unsigned int t;
|
|
|
|
t = ar933x_uart_read(up, offset);
|
|
t &= ~mask;
|
|
t |= val;
|
|
ar933x_uart_write(up, offset, t);
|
|
}
|
|
|
|
static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up,
|
|
unsigned int offset,
|
|
unsigned int val)
|
|
{
|
|
ar933x_uart_rmw(up, offset, 0, val);
|
|
}
|
|
|
|
static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up,
|
|
unsigned int offset,
|
|
unsigned int val)
|
|
{
|
|
ar933x_uart_rmw(up, offset, val, 0);
|
|
}
|
|
|
|
static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
|
|
{
|
|
up->ier |= AR933X_UART_INT_TX_EMPTY;
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
|
}
|
|
|
|
static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
|
|
{
|
|
up->ier &= ~AR933X_UART_INT_TX_EMPTY;
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
|
}
|
|
|
|
static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
|
|
{
|
|
unsigned int rdata;
|
|
|
|
rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
|
|
rdata |= AR933X_UART_DATA_TX_CSR;
|
|
ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
|
|
}
|
|
|
|
static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
unsigned long flags;
|
|
unsigned int rdata;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CAR;
|
|
}
|
|
|
|
static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
}
|
|
|
|
static void ar933x_uart_start_tx(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
ar933x_uart_start_tx_interrupt(up);
|
|
}
|
|
|
|
static void ar933x_uart_stop_tx(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
ar933x_uart_stop_tx_interrupt(up);
|
|
}
|
|
|
|
static void ar933x_uart_stop_rx(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
up->ier &= ~AR933X_UART_INT_RX_VALID;
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
|
}
|
|
|
|
static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
if (break_state == -1)
|
|
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_TX_BREAK);
|
|
else
|
|
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_TX_BREAK);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static void ar933x_uart_enable_ms(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* baudrate = (clk / (scale + 1)) * (step * (1 / 2^17))
|
|
*/
|
|
static unsigned long ar933x_uart_get_baud(unsigned int clk,
|
|
unsigned int scale,
|
|
unsigned int step)
|
|
{
|
|
u64 t;
|
|
u32 div;
|
|
|
|
div = (2 << 16) * (scale + 1);
|
|
t = clk;
|
|
t *= step;
|
|
t += (div / 2);
|
|
do_div(t, div);
|
|
|
|
return t;
|
|
}
|
|
|
|
static void ar933x_uart_get_scale_step(unsigned int clk,
|
|
unsigned int baud,
|
|
unsigned int *scale,
|
|
unsigned int *step)
|
|
{
|
|
unsigned int tscale;
|
|
long min_diff;
|
|
|
|
*scale = 0;
|
|
*step = 0;
|
|
|
|
min_diff = baud;
|
|
for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
|
|
u64 tstep;
|
|
int diff;
|
|
|
|
tstep = baud * (tscale + 1);
|
|
tstep *= (2 << 16);
|
|
do_div(tstep, clk);
|
|
|
|
if (tstep > AR933X_UART_MAX_STEP)
|
|
break;
|
|
|
|
diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
|
|
if (diff < min_diff) {
|
|
min_diff = diff;
|
|
*scale = tscale;
|
|
*step = tstep;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ar933x_uart_set_termios(struct uart_port *port,
|
|
struct ktermios *new,
|
|
struct ktermios *old)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
unsigned int cs;
|
|
unsigned long flags;
|
|
unsigned int baud, scale, step;
|
|
|
|
/* Only CS8 is supported */
|
|
new->c_cflag &= ~CSIZE;
|
|
new->c_cflag |= CS8;
|
|
|
|
/* Only one stop bit is supported */
|
|
new->c_cflag &= ~CSTOPB;
|
|
|
|
cs = 0;
|
|
if (new->c_cflag & PARENB) {
|
|
if (!(new->c_cflag & PARODD))
|
|
cs |= AR933X_UART_CS_PARITY_EVEN;
|
|
else
|
|
cs |= AR933X_UART_CS_PARITY_ODD;
|
|
} else {
|
|
cs |= AR933X_UART_CS_PARITY_NONE;
|
|
}
|
|
|
|
/* Mark/space parity is not supported */
|
|
new->c_cflag &= ~CMSPAR;
|
|
|
|
baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud);
|
|
ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step);
|
|
|
|
/*
|
|
* Ok, we're now changing the port state. Do it with
|
|
* interrupts disabled.
|
|
*/
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/* disable the UART */
|
|
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S);
|
|
|
|
/* Update the per-port timeout. */
|
|
uart_update_timeout(port, new->c_cflag, baud);
|
|
|
|
up->port.ignore_status_mask = 0;
|
|
|
|
/* ignore all characters if CREAD is not set */
|
|
if ((new->c_cflag & CREAD) == 0)
|
|
up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
|
|
|
|
ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
|
|
scale << AR933X_UART_CLOCK_SCALE_S | step);
|
|
|
|
/* setup configuration register */
|
|
ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
|
|
|
|
/* enable host interrupt */
|
|
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_HOST_INT_EN);
|
|
|
|
/* reenable the UART */
|
|
ar933x_uart_rmw(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
|
|
AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
if (tty_termios_baud_rate(new))
|
|
tty_termios_encode_baud_rate(new, baud, baud);
|
|
}
|
|
|
|
static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
|
|
{
|
|
struct tty_port *port = &up->port.state->port;
|
|
int max_count = 256;
|
|
|
|
do {
|
|
unsigned int rdata;
|
|
unsigned char ch;
|
|
|
|
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
|
if ((rdata & AR933X_UART_DATA_RX_CSR) == 0)
|
|
break;
|
|
|
|
/* remove the character from the FIFO */
|
|
ar933x_uart_write(up, AR933X_UART_DATA_REG,
|
|
AR933X_UART_DATA_RX_CSR);
|
|
|
|
up->port.icount.rx++;
|
|
ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
|
|
|
|
if (uart_handle_sysrq_char(&up->port, ch))
|
|
continue;
|
|
|
|
if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
|
|
tty_insert_flip_char(port, ch, TTY_NORMAL);
|
|
} while (max_count-- > 0);
|
|
|
|
spin_unlock(&up->port.lock);
|
|
tty_flip_buffer_push(port);
|
|
spin_lock(&up->port.lock);
|
|
}
|
|
|
|
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.state->xmit;
|
|
int count;
|
|
|
|
if (uart_tx_stopped(&up->port))
|
|
return;
|
|
|
|
count = up->port.fifosize;
|
|
do {
|
|
unsigned int rdata;
|
|
|
|
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
|
if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
|
|
break;
|
|
|
|
if (up->port.x_char) {
|
|
ar933x_uart_putc(up, up->port.x_char);
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
continue;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
|
|
ar933x_uart_putc(up, xmit->buf[xmit->tail]);
|
|
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
up->port.icount.tx++;
|
|
} while (--count > 0);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
if (!uart_circ_empty(xmit))
|
|
ar933x_uart_start_tx_interrupt(up);
|
|
}
|
|
|
|
static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct ar933x_uart_port *up = dev_id;
|
|
unsigned int status;
|
|
|
|
status = ar933x_uart_read(up, AR933X_UART_CS_REG);
|
|
if ((status & AR933X_UART_CS_HOST_INT) == 0)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&up->port.lock);
|
|
|
|
status = ar933x_uart_read(up, AR933X_UART_INT_REG);
|
|
status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
|
|
|
|
if (status & AR933X_UART_INT_RX_VALID) {
|
|
ar933x_uart_write(up, AR933X_UART_INT_REG,
|
|
AR933X_UART_INT_RX_VALID);
|
|
ar933x_uart_rx_chars(up);
|
|
}
|
|
|
|
if (status & AR933X_UART_INT_TX_EMPTY) {
|
|
ar933x_uart_write(up, AR933X_UART_INT_REG,
|
|
AR933X_UART_INT_TX_EMPTY);
|
|
ar933x_uart_stop_tx_interrupt(up);
|
|
ar933x_uart_tx_chars(up);
|
|
}
|
|
|
|
spin_unlock(&up->port.lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ar933x_uart_startup(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
ret = request_irq(up->port.irq, ar933x_uart_interrupt,
|
|
up->port.irqflags, dev_name(up->port.dev), up);
|
|
if (ret)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/* Enable HOST interrupts */
|
|
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_HOST_INT_EN);
|
|
|
|
/* Enable RX interrupts */
|
|
up->ier = AR933X_UART_INT_RX_VALID;
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ar933x_uart_shutdown(struct uart_port *port)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
/* Disable all interrupts */
|
|
up->ier = 0;
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
|
|
|
|
/* Disable break condition */
|
|
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
|
|
AR933X_UART_CS_TX_BREAK);
|
|
|
|
free_irq(up->port.irq, up);
|
|
}
|
|
|
|
static const char *ar933x_uart_type(struct uart_port *port)
|
|
{
|
|
return (port->type == PORT_AR933X) ? "AR933X UART" : NULL;
|
|
}
|
|
|
|
static void ar933x_uart_release_port(struct uart_port *port)
|
|
{
|
|
/* Nothing to release ... */
|
|
}
|
|
|
|
static int ar933x_uart_request_port(struct uart_port *port)
|
|
{
|
|
/* UARTs always present */
|
|
return 0;
|
|
}
|
|
|
|
static void ar933x_uart_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE)
|
|
port->type = PORT_AR933X;
|
|
}
|
|
|
|
static int ar933x_uart_verify_port(struct uart_port *port,
|
|
struct serial_struct *ser)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
if (ser->type != PORT_UNKNOWN &&
|
|
ser->type != PORT_AR933X)
|
|
return -EINVAL;
|
|
|
|
if (ser->irq < 0 || ser->irq >= NR_IRQS)
|
|
return -EINVAL;
|
|
|
|
if (ser->baud_base < up->min_baud ||
|
|
ser->baud_base > up->max_baud)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct uart_ops ar933x_uart_ops = {
|
|
.tx_empty = ar933x_uart_tx_empty,
|
|
.set_mctrl = ar933x_uart_set_mctrl,
|
|
.get_mctrl = ar933x_uart_get_mctrl,
|
|
.stop_tx = ar933x_uart_stop_tx,
|
|
.start_tx = ar933x_uart_start_tx,
|
|
.stop_rx = ar933x_uart_stop_rx,
|
|
.enable_ms = ar933x_uart_enable_ms,
|
|
.break_ctl = ar933x_uart_break_ctl,
|
|
.startup = ar933x_uart_startup,
|
|
.shutdown = ar933x_uart_shutdown,
|
|
.set_termios = ar933x_uart_set_termios,
|
|
.type = ar933x_uart_type,
|
|
.release_port = ar933x_uart_release_port,
|
|
.request_port = ar933x_uart_request_port,
|
|
.config_port = ar933x_uart_config_port,
|
|
.verify_port = ar933x_uart_verify_port,
|
|
};
|
|
|
|
static struct ar933x_uart_port *
|
|
ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
|
|
|
|
static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up)
|
|
{
|
|
unsigned int status;
|
|
unsigned int timeout = 60000;
|
|
|
|
/* Wait up to 60ms for the character(s) to be sent. */
|
|
do {
|
|
status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
|
|
if (--timeout == 0)
|
|
break;
|
|
udelay(1);
|
|
} while ((status & AR933X_UART_DATA_TX_CSR) == 0);
|
|
}
|
|
|
|
static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
|
|
|
|
ar933x_uart_wait_xmitr(up);
|
|
ar933x_uart_putc(up, ch);
|
|
}
|
|
|
|
static void ar933x_uart_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct ar933x_uart_port *up = ar933x_console_ports[co->index];
|
|
unsigned long flags;
|
|
unsigned int int_en;
|
|
int locked = 1;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (up->port.sysrq)
|
|
locked = 0;
|
|
else if (oops_in_progress)
|
|
locked = spin_trylock(&up->port.lock);
|
|
else
|
|
spin_lock(&up->port.lock);
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
|
|
|
|
uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
ar933x_uart_wait_xmitr(up);
|
|
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en);
|
|
|
|
ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
|
|
|
|
if (locked)
|
|
spin_unlock(&up->port.lock);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static int ar933x_uart_console_setup(struct console *co, char *options)
|
|
{
|
|
struct ar933x_uart_port *up;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS)
|
|
return -EINVAL;
|
|
|
|
up = ar933x_console_ports[co->index];
|
|
if (!up)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console ar933x_uart_console = {
|
|
.name = "ttyATH",
|
|
.write = ar933x_uart_console_write,
|
|
.device = uart_console_device,
|
|
.setup = ar933x_uart_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &ar933x_uart_driver,
|
|
};
|
|
|
|
static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
|
|
{
|
|
if (!ar933x_uart_console_enabled())
|
|
return;
|
|
|
|
ar933x_console_ports[up->port.line] = up;
|
|
}
|
|
|
|
static struct uart_driver ar933x_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRIVER_NAME,
|
|
.dev_name = "ttyATH",
|
|
.nr = CONFIG_SERIAL_AR933X_NR_UARTS,
|
|
.cons = NULL, /* filled in runtime */
|
|
};
|
|
|
|
static int ar933x_uart_probe(struct platform_device *pdev)
|
|
{
|
|
struct ar933x_uart_port *up;
|
|
struct uart_port *port;
|
|
struct resource *mem_res;
|
|
struct resource *irq_res;
|
|
struct device_node *np;
|
|
unsigned int baud;
|
|
int id;
|
|
int ret;
|
|
|
|
np = pdev->dev.of_node;
|
|
if (config_enabled(CONFIG_OF) && np) {
|
|
id = of_alias_get_id(np, "serial");
|
|
if (id < 0) {
|
|
dev_err(&pdev->dev, "unable to get alias id, err=%d\n",
|
|
id);
|
|
return id;
|
|
}
|
|
} else {
|
|
id = pdev->id;
|
|
if (id == -1)
|
|
id = 0;
|
|
}
|
|
|
|
if (id > CONFIG_SERIAL_AR933X_NR_UARTS)
|
|
return -EINVAL;
|
|
|
|
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!irq_res) {
|
|
dev_err(&pdev->dev, "no IRQ resource\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port),
|
|
GFP_KERNEL);
|
|
if (!up)
|
|
return -ENOMEM;
|
|
|
|
up->clk = devm_clk_get(&pdev->dev, "uart");
|
|
if (IS_ERR(up->clk)) {
|
|
dev_err(&pdev->dev, "unable to get UART clock\n");
|
|
return PTR_ERR(up->clk);
|
|
}
|
|
|
|
port = &up->port;
|
|
|
|
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
port->membase = devm_ioremap_resource(&pdev->dev, mem_res);
|
|
if (IS_ERR(port->membase))
|
|
return PTR_ERR(port->membase);
|
|
|
|
ret = clk_prepare_enable(up->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
port->uartclk = clk_get_rate(up->clk);
|
|
if (!port->uartclk) {
|
|
ret = -EINVAL;
|
|
goto err_disable_clk;
|
|
}
|
|
|
|
port->mapbase = mem_res->start;
|
|
port->line = id;
|
|
port->irq = irq_res->start;
|
|
port->dev = &pdev->dev;
|
|
port->type = PORT_AR933X;
|
|
port->iotype = UPIO_MEM32;
|
|
|
|
port->regshift = 2;
|
|
port->fifosize = AR933X_UART_FIFO_SIZE;
|
|
port->ops = &ar933x_uart_ops;
|
|
|
|
baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
|
|
up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
|
|
|
|
baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
|
|
up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
|
|
|
|
ar933x_uart_add_console_port(up);
|
|
|
|
ret = uart_add_one_port(&ar933x_uart_driver, &up->port);
|
|
if (ret)
|
|
goto err_disable_clk;
|
|
|
|
platform_set_drvdata(pdev, up);
|
|
return 0;
|
|
|
|
err_disable_clk:
|
|
clk_disable_unprepare(up->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int ar933x_uart_remove(struct platform_device *pdev)
|
|
{
|
|
struct ar933x_uart_port *up;
|
|
|
|
up = platform_get_drvdata(pdev);
|
|
|
|
if (up) {
|
|
uart_remove_one_port(&ar933x_uart_driver, &up->port);
|
|
clk_disable_unprepare(up->clk);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ar933x_uart_of_ids[] = {
|
|
{ .compatible = "qca,ar9330-uart" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids);
|
|
#endif
|
|
|
|
static struct platform_driver ar933x_uart_platform_driver = {
|
|
.probe = ar933x_uart_probe,
|
|
.remove = ar933x_uart_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(ar933x_uart_of_ids),
|
|
},
|
|
};
|
|
|
|
static int __init ar933x_uart_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (ar933x_uart_console_enabled())
|
|
ar933x_uart_driver.cons = &ar933x_uart_console;
|
|
|
|
ret = uart_register_driver(&ar933x_uart_driver);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
ret = platform_driver_register(&ar933x_uart_platform_driver);
|
|
if (ret)
|
|
goto err_unregister_uart_driver;
|
|
|
|
return 0;
|
|
|
|
err_unregister_uart_driver:
|
|
uart_unregister_driver(&ar933x_uart_driver);
|
|
err_out:
|
|
return ret;
|
|
}
|
|
|
|
static void __exit ar933x_uart_exit(void)
|
|
{
|
|
platform_driver_unregister(&ar933x_uart_platform_driver);
|
|
uart_unregister_driver(&ar933x_uart_driver);
|
|
}
|
|
|
|
module_init(ar933x_uart_init);
|
|
module_exit(ar933x_uart_exit);
|
|
|
|
MODULE_DESCRIPTION("Atheros AR933X UART driver");
|
|
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|