linux_old1/include/asm-arm/hardware/linkup-l1110.h

49 lines
1.5 KiB
C

/*
*
* Definitions for H3600 Handheld Computer
*
* Copyright 2001 Compaq Computer Corporation.
*
* Use consistent with the GNU GPL is permitted,
* provided that this copyright notice is
* preserved in its entirety in all copies and derived works.
*
* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
* FITNESS FOR ANY PARTICULAR PURPOSE.
*
* Author: Jamey Hicks.
*
*/
/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
/* PC Card Status Register */
#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */
#define LINKUP_PRS_S2 (1 << 1)
#define LINKUP_PRS_S3 (1 << 2)
#define LINKUP_PRS_S4 (1 << 3)
#define LINKUP_PRS_BVD1 (1 << 4)
#define LINKUP_PRS_BVD2 (1 << 5)
#define LINKUP_PRS_VS1 (1 << 6)
#define LINKUP_PRS_VS2 (1 << 7)
#define LINKUP_PRS_RDY (1 << 8)
#define LINKUP_PRS_CD1 (1 << 9)
#define LINKUP_PRS_CD2 (1 << 10)
/* PC Card Command Register */
#define LINKUP_PRC_S1 (1 << 0)
#define LINKUP_PRC_S2 (1 << 1)
#define LINKUP_PRC_S3 (1 << 2)
#define LINKUP_PRC_S4 (1 << 3)
#define LINKUP_PRC_RESET (1 << 4)
#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */
#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */
struct linkup_l1110 {
volatile short prc;
};