* refactor: move autoremove into the jobexecutor
breaking: docker container are removed after job exit
* reduce complexity
* remove linter exception
* reduce cyclic complexity
* fix: always allow 1 min for stopping and removing the runner, even if we were cancelled
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: interpolate the step names
Step names could contain expressions refering to event data.
Fixes#1353
* test: add missing mock data
* fix: setup composite expression evaluator
The RunContext does contain a cached ExpressionEvaluator.
This should be the case the composite RunContext as well.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <cplee@nektos.com>
* feat: use logger from context wherever possible
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add step/job id and results to json logs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* test: value to be masked should not be hard-coded in the action
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* fix: replace values following ::add-mask:: in evaluated strings
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: [DEBUG] identifier for debug logs to distinguish them
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: replace logger with step logger
The container gets injected a job logger, but during the time that steps
are run, we want to use the step logger.
This commit wraps pre/main/post steps in an executor that replaces the
job logger with a step logger.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add pre/post stage identifier fields to json log output
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: add job/step result status to skipped steps/jobs
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: handle context cancelation during docker exec
To allow interrupting docker exec (which could be long running)
we process the log output in a go routine and handle
context cancelation as well as command result.
In case of context cancelation a CTRL+C is written into the docker
container. This should be enough to terminate the running
command.
To make sure we do not get stuck during cleanup, we do
set the cleanup contexts with a timeout of 5 minutes
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
* feat: handle SIGTERM signal and abort run
* test: on context cancel, abort running command
This test makes sure that whenever the act Context was canceled, the
currently running docker exec is sent a 0x03 (ctrl+c).
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: make sure the exec funcction handles command exit code
This test makes sure that the exec function does handle
docker command error results
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
* refactor: split step_context into separate files
This commit moves functions from the step_context.go file into different
files, but does otherwise not change anything.
This is done to make it easier to review the changes made to these
functions in the next commit, where we introduce a step factory to
facilitate better unit testing of steps.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* refactor: introduce step factory and make steps testable
With this commit we're introducing the `stepFactory` and interfaces
and implementations for each different kind of step (run, docker,
local and remote actions).
Separating each step kind into its own interface and implementation
makes it easier to reason about and to change behaviour of the step.
By introducing interfaces we enable better unit testability as now
each step implementation, the step factory and the job executor can
be tested on their own by mocking out parts that are irrelevant.
This commits prepares us for implementing pre/post actions in a
later PR.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* fix: run post steps in reverse order
* test: add missing asserts for mocks
* refactor: use local reference instead of function
This may make code more easy to follow.
* refactor: correct typo in function name
* test: use named structs
* test: only expected valid calls
There are mocks which are only called on certain conditions.
* refactor: use step-model to get step name
Using the step-logger we have to get the logger name from the
step model.
* test: only mock stopContainer if required
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
* feat: add step name to logger field
This change does add the step name to the logger fields. This does
not change the output for our users, but for the json logger, it
does make each step output traceable.
* fix: remove new logger
Since logrus and context both are immutable for our case, we
can just add a new field and store the logger in the context.
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
This splits the executor from the RunContext into its own function
called newJobExecutor.
We defined an interface called jobInfo which is implemented by the RunContext.
This enables better unit testing because only a small interface needs to
be mocked.
This is a preparation for implementing pre and post actions.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
ChristopherHX