* fix: skip local actions pre step in any case
We should skip local actions pre step, as it is not supported by github.
In turn we may need to late prepare remote actions which are run
as steps in a local composite action.
Fixes#1193
* test: remove obsolete test case
Since local actions does not run any pre-step anymore we don't test this case.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
There might be use cases where users want to use GitHub's variables in
the environment variables, which is a valid use case.
This commits adds support for replacement of GitHub's env with GitHub's
values.
Signed-off-by: André Martins <aanm90@gmail.com>
* Update step_action_local.go
* Enable Tests for DRYRUN
* Update runner_test.go
* Update runner_test.go
* Move DRYRUN Test in it's own function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: handle context cancelation during docker exec
To allow interrupting docker exec (which could be long running)
we process the log output in a go routine and handle
context cancelation as well as command result.
In case of context cancelation a CTRL+C is written into the docker
container. This should be enough to terminate the running
command.
To make sure we do not get stuck during cleanup, we do
set the cleanup contexts with a timeout of 5 minutes
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
* feat: handle SIGTERM signal and abort run
* test: on context cancel, abort running command
This test makes sure that whenever the act Context was canceled, the
currently running docker exec is sent a 0x03 (ctrl+c).
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* test: make sure the exec funcction handles command exit code
This test makes sure that the exec function does handle
docker command error results
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Björn Brauer <zaubernerd@zaubernerd.de>
* feat: add post step to actions and add state command
This commit includes requried changes for running post steps
for local and remote actions.
This allows general cleanup work to be done after executing
an action.
Communication is allowed between this steps, by using the
action state.
* feat: collect pre and post steps for composite actions
* refactor: move composite action logic into own file
* refactor: restructure composite handling
* feat: run composite post steps during post step lifecycle
* refactor: remove duplicate log output
* feat: run all composite post actions in a step
Since composite actions could have multiple pre/post steps inside,
we need to run all of them in a single top-level pre/post step.
This PR includes a test case for this and the correct order of steps
to be executed.
* refactor: remove unused lines of code
* refactor: simplify test expression
* fix: use composite job logger
* fix: make step output more readable
* fix: enforce running all post executor
To make sure every post executor/step is executed, it is chained
with it's own Finally executor.
* fix: do not run post step if no step result is available
Having no step result means we do not run any step (neither pre
nor main) and we do not need to run post.
* fix: setup defaults
If no pre-if or post-if is given, it should default to 'always()'.
This could be set even if there is no pre or post step.
In fact this is required for composite actions and included post
steps to run.
* fix: output step related if expression
* test: update expectation
* feat: run pre step from actions (#1110)
This PR implements running pre steps for remote actions.
This includes remote actions using inside local composite actions.
* fix: set correct expr default status checks
For post-if conditions the default status check should be
always(), while for all other if expression the default status
check is success()
References:
https://docs.github.com/en/actions/learn-github-actions/expressions#status-check-functionshttps://docs.github.com/en/actions/creating-actions/metadata-syntax-for-github-actions#runspost-if
* fix: remove code added during rebase
If a step does not have either a `run` or `uses` directive it is
considered invalid.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: remove composite action runcontext workaround
The RunContext is cloned to execute a composite action with all its
steps in a similar context. This required some workaround, since
the command handler has kept a reference to the original RunContext.
This is solved now, by replacing the docker LogWriter with a proper
scoped LogWriter.
This prepares for a simpler setup of composite actions to be able
to create and re-create the composite RunContext for pre/main/post
action steps.
* test: check env-vars for local js and docker actions
* test: test remote docker and js actions
* fix: merge github context into env when read and setup
* refacotr: simplify composite context setup
* test: use a map matcher to test input setup
* fix: restore composite log output
Since we create a new line writer, we need to log the raw_output as well.
Otherwise no output will be available from the log-writer
* fix: add RunContext JobName to fill GITHUB_JOBNAME
* test: use nektos/act-test-actions
* fix: allow masking values in composite actions
To allow masking of values from composite actions, we need
to use a custom job logger with a reference to the masked
values for the composite run context.
* refactor: keep existing logger for composite actions
To not introduce another new logger while still be able to use
the masking from the composite action, we add the masks to
the go context. To leverage that context, we also add the context
to the log entries where the valueMasker then could get the actual
mask values.
With this way to 'inject' the masked values into the logger, we do
- keep the logger
- keep the coloring
- stay away from inconsistencies due to parallel jobs
* fix: re-add removed color increase
This one should have never removed :-)
* fix: add missing ExtraPath attribute
* fix: merge run context env into composite run context env
This adds a test and fix for the parent environment. It should be
inherited by the composite environment.
* test: add missing test case
* fix: store github token next to secrets
We must not expose the secrets to composite actions, but the
`github.token` is available inside composite actions.
To provide this we store the token in the config and create it in
the GithubContext from there.
The token can be used with `github.token` but is not available as
`secrets.GITHUB_TOKEN`.
This implements the same behavior as on GitHub.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
* fixup! fix: allow masking values in composite actions
* style: use tabs instead of spaces to fix linter errors
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <markus.noll@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
To make the test logs more readable, we should fold the
output per test into a group.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This prevented JetBrains GoLand from recognising subtests and treated
it all as single big test, VSCode seems to be still broken in that regard
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
Co-authored-by: Casey Lee <cplee@nektos.com>
Prevents random failing of all other runs when qemu binfmt
is not set up
Signed-off-by: Ryan <me@hackerc.at>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* don't merge env var if it exists already
* remove test workflow
* add some tests
* change mergeMaps order instead of checking for existence
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* fix: copy ignored tracked files
* fix
* refactor: Extract callback to fileCollector
fix: temporary tar archive not deletable on windows
fix: `.*` in gitignore ignores all files
* Move nolint: gocyclo
* pass context as parameter
* goimport
* Add fs interface + one test
* fix lint, also test for ignored non tracked file
* fix filename
* Apply suggestions from code review
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This change reduces the interfaces by removing
obsolete parameters from functions.
Obsolete parameters does not means unused ones, but
parameters which could be retrieved from other parameters
instead.
This should simplify logic and maintainability for these
functions.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: split step_context into separate files
This commit moves functions from the step_context.go file into different
files, but does otherwise not change anything.
This is done to make it easier to review the changes made to these
functions in the next commit, where we introduce a step factory to
facilitate better unit testing of steps.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* refactor: introduce step factory and make steps testable
With this commit we're introducing the `stepFactory` and interfaces
and implementations for each different kind of step (run, docker,
local and remote actions).
Separating each step kind into its own interface and implementation
makes it easier to reason about and to change behaviour of the step.
By introducing interfaces we enable better unit testability as now
each step implementation, the step factory and the job executor can
be tested on their own by mocking out parts that are irrelevant.
This commits prepares us for implementing pre/post actions in a
later PR.
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
* fix: run post steps in reverse order
* test: add missing asserts for mocks
* refactor: use local reference instead of function
This may make code more easy to follow.
* refactor: correct typo in function name
* test: use named structs
* test: only expected valid calls
There are mocks which are only called on certain conditions.
* refactor: use step-model to get step name
Using the step-logger we have to get the logger name from the
step model.
* test: only mock stopContainer if required
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Christopher Homberger <christopher.homberger@web.de>
* Fix: panic: reflect: slice index out of range
* Update interpreter.go
* [no ci] Return null for negative indexes
* Add tests for index access
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
act has a feature that skips the checkout action to do a remote
checkout when a local checkout exists. in some cases, e.g. when
running act in a CI, you always want to clone the repository.
The function `WithTestContext` is never called in the project, and
there is just one usage of `TestContext`, inside one of our loggers
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* feat: add step name to logger field
This change does add the step name to the logger fields. This does
not change the output for our users, but for the json logger, it
does make each step output traceable.
* fix: remove new logger
Since logrus and context both are immutable for our case, we
can just add a new field and store the logger in the context.
Co-authored-by: Casey Lee <cplee@nektos.com>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-Authored-By: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Casey Lee <cplee@nektos.com>
* feat: add json logger output
This will allow to format log output as json.
This is helpful in cases where act is not executed on a 'local' machine.
* refactor: use runner config
Using the runner config to configure logging is cleaner.
Co-authored-by: Casey Lee <cplee@nektos.com>
this commit adds support for the `::add-mask::` command, which was
implemented as a stub before.
it does not cover debug output that appears when you run act in
verbose mode
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
* feat: run jobs in parallel
This changes fixes and restructures the parallel execution of jobs.
The previous changes limiting the parallel execution did break this
and allowed only one job in parallel.
While we run #CPU jobs in parallel now, the jobs added per job-matrix
add to this. So we might over-commit to the capacity, but at least
it is limited.
* fix: correctly build job pipeline
The job pipeline should just append all required pipeline steps.
The parallelism will be handled by the ParallelExecutor and we
shouldn't handle it during building the pipelines.
Also this adds a test, that the ParallelExecutor does run
a limited amount of parallel goroutines.
* test: correct test implementation
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: remove debug error output
Errors should always be logged with an error level and not debug level.
Since the error is returned here, it will be logged later as an error.
Presumably this was a leftover from debugging the executor chain in:
PR: #971
* refactor: debug log wich expression is going to be evaluated
* fix: handle nil in EvalBool
We've seen this issue when the env map is not set-up properly,
i.e. when the env map is nil, EvalBool might return nil, which should
be handled as a falsy value.
* fix: fail on error in if expression and return the evaluation error
Stop running the workflow in case an expression cannot be evaluated.
Fixes: #1008
* fix: remove quotes from inside expression syntax in test
It looks like having an expression inside double quotes inside the
expression syntax is not valid: https://github.com/ZauberNerd/act-test/actions/runs/1881986429
The workflow is not valid. .github/workflows/test.yml (Line: 10, Col: 13): Unexpected symbol: '"endsWith'. Located at position 1 within expression: "endsWith('Hello world', 'ld')"
* refactor: export IsTruthy function from exprparser package
* refactor: use IsTruthy function in EvalBool
* refactor: move debug log for expression rewrite to rewrite function
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
* refactor: default empty `if:` statement to `if: success()` in evaluator
Previously the code to default an empty `if:` statement in the yaml file
was implemented in different files in the model package.
Now an empty `if:` statement defaults to `success()` in the expression
evaluator.
* refactor: remove obsolete `FixIfStatement` functions
The introduction of the expression evaluator seems to have made these
functions obsolete, as the test case `TestRunEvent/issue-598` works even
without these functions.
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
This change extracts the functionality of reading an `action.y(a)ml` or
creation of a `(Synthetic Action)` into its own type to enable better
unit testing / mocking of those IO operations.
This is done in preparation for the implementation of pre/post action
support in act.
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
This splits the executor from the RunContext into its own function
called newJobExecutor.
We defined an interface called jobInfo which is implemented by the RunContext.
This enables better unit testing because only a small interface needs to
be mocked.
This is a preparation for implementing pre and post actions.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Marcus Noll <marcus.noll@new-work.se>
Co-authored-by: Jonas Holland <jonas.holland@new-work.se>
Co-authored-by: Robert Kowalski <robert.kowalski@new-work.se>
Co-authored-by: Markus Wolf <markus.wolf@new-work.se>
Github sets the outcome and conclusion to skipped
and this PR does the same during the pipeline run for
the StepResults in act.
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
Co-authored-by: Björn Brauer <bjoern.brauer@new-work.se>
With this change `act` will try to populate the `githubContext.ref` and
`githubContext.sha` with values read from the event payload.
Caveats:
- `page_build` should not have a ref
- `status` should not have a ref
- `registry_package` should set the ref to the branch/tag but the
payload isn't documented
- `workflow_call` should set ref to the same value as its caller but the
payload isn't documented
- most of the events should set the sha to the last commit on the ref
but unfortunately the sha is not always included in the payload,
therefore we use the sha from the local git checkout
Co-Authored-By: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Co-authored-by: Philipp Hinrichsen <philipp.hinrichsen@new-work.se>
Markus Wolf