pxmlw6n2f/Gazebo_Distributed_MPI/test/integration/model_manipulation.cc

/*
 * Copyright (C) 2016 Open Source Robotics Foundation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
*/

#include "gazebo/gui/Actions.hh"
#include "gazebo/gui/GLWidget.hh"
#include "gazebo/gui/GuiEvents.hh"
#include "gazebo/gui/GuiIface.hh"
#include "gazebo/gui/MainWindow.hh"
#include "model_manipulation.hh"

#include "test_config.h"

/////////////////////////////////////////////////
void MouseDrag(QWidget *_widget, Qt::MouseButton _button,
    Qt::KeyboardModifiers _modifiers,
    const ignition::math::Vector2i &_start,
    const ignition::math::Vector2i &_end)
{
  ignition::math::Vector2d start(_start.X(), _start.Y());
  ignition::math::Vector2d end(_end.X(), _end.Y());

  // move the mouse cursor to the _start pos
  QPoint startPt(start.X(), start.Y());
  QTest::mouseMove(_widget, startPt);

  // There seem to be a problem simulating mouse drag using QTest
  // so use raw QMouseEvent.
  QMouseEvent *pressEvent = new QMouseEvent(QEvent::MouseButtonPress, startPt,
      _widget->mapToGlobal(startPt), _button, _button, _modifiers);
  QApplication::postEvent(_widget, pressEvent);

  ignition::math::Vector2d dist = end - start;

  // move the cursor to _end pos over 10 steps
  unsigned int steps = 10;
  for (unsigned int i = 0; i < steps; ++i)
  {
    // compute next pos to move the cursor to
    ignition::math::Vector2d nextPos = start + dist * (1.0 / steps) * (i+1);

    QPoint movePt(nextPos.X(), nextPos.Y());
    QMouseEvent *moveEvent = new QMouseEvent(QEvent::MouseMove, movePt,
        _widget->mapToGlobal(movePt), _button, _button, _modifiers);
    QApplication::postEvent(_widget, moveEvent);

    gazebo::common::Time::MSleep(10);
    QCoreApplication::processEvents();
  }

  QPoint releasePt(end.X(), end.Y());
  QMouseEvent *releaseEvent = new QMouseEvent(QEvent::MouseButtonRelease,
      releasePt, _widget->mapToGlobal(releasePt), _button, _button,
      _modifiers);
  QApplication::postEvent(_widget, releaseEvent);
}

/////////////////////////////////////////////////
void ModelManipulationTest::StopProcessingPoseMsgs()
{
  // increased from 5.0 to 8.0 per issue #1911
  this->resMaxPercentChange = 8.0;
  this->shareMaxPercentChange = 2.0;

  // Load a world which has moving models
  this->Load("test/worlds/revolute_joint_test.world", false, false, false);

  // Create the main window.
  gazebo::gui::MainWindow *mainWindow = new gazebo::gui::MainWindow();
  QVERIFY(mainWindow != NULL);
  mainWindow->Load();
  mainWindow->Init();
  mainWindow->show();

  // Get scene
  auto scene = gazebo::gui::get_active_camera()->GetScene();
  QVERIFY(scene != NULL);

  // Check we're in select mode
  QVERIFY(gazebo::gui::g_arrowAct != NULL);
  QVERIFY(gazebo::gui::g_arrowAct->isChecked());

  this->ProcessEventsAndDraw(mainWindow);

  // Get a moving link and check its pose is changing over time
  auto linkVis = scene->GetVisual("pendulum_0deg::upper_link");
  QVERIFY(linkVis != NULL);
  auto pose = linkVis->GetWorldPose();

  this->ProcessEventsAndDraw(mainWindow);

  QVERIFY(pose != linkVis->GetWorldPose());
  pose = linkVis->GetWorldPose();

  // Select the parent model and check its pose still changes over time
  gazebo::event::Events::setSelectedEntity("pendulum_0deg", "normal");

  this->ProcessEventsAndDraw(mainWindow);

  QVERIFY(pose != linkVis->GetWorldPose());
  pose = linkVis->GetWorldPose();

  // Change to translate mode and check the model stops moving
  QVERIFY(gazebo::gui::g_translateAct != NULL);
  QVERIFY(!gazebo::gui::g_translateAct->isChecked());
  gazebo::gui::g_translateAct->trigger();

  this->ProcessEventsAndDraw(mainWindow);

  // Sequence was: select -> change mode
  QVERIFY(pose == linkVis->GetWorldPose());

  // Deselect model and check it starts moving again even though we're still in
  // translate mode
  gazebo::event::Events::setSelectedEntity("", "move");

  this->ProcessEventsAndDraw(mainWindow);

  QVERIFY(gazebo::gui::g_translateAct->isChecked());
  QVERIFY(pose != linkVis->GetWorldPose());
  pose = linkVis->GetWorldPose();

  // Select model again and check it stops again
  gazebo::event::Events::setSelectedEntity("pendulum_0deg", "move");

  this->ProcessEventsAndDraw(mainWindow);

  // Sequence was: change mode -> select
  QVERIFY(pose == linkVis->GetWorldPose());

  // Change to select mode and check model moves again
  QVERIFY(!gazebo::gui::g_arrowAct->isChecked());
  gazebo::gui::g_arrowAct->trigger();

  this->ProcessEventsAndDraw(mainWindow);

  QVERIFY(gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(pose != linkVis->GetWorldPose());

  delete mainWindow;
  mainWindow = NULL;
}

/////////////////////////////////////////////////
void ModelManipulationTest::Shortcuts()
{
  this->resMaxPercentChange = 5.0;
  this->shareMaxPercentChange = 2.0;

  // Load a world which has moving models
  this->Load("worlds/shapes.world", false, false, false);

  // Create the main window.
  gazebo::gui::MainWindow *mainWindow = new gazebo::gui::MainWindow();
  QVERIFY(mainWindow != NULL);
  mainWindow->Load();
  mainWindow->Init();
  mainWindow->show();

  this->ProcessEventsAndDraw(mainWindow);

  // Get camera
  gazebo::rendering::UserCameraPtr cam = gazebo::gui::get_active_camera();
  QVERIFY(cam != nullptr);
  gazebo::rendering::ScenePtr scene = cam->GetScene();
  QVERIFY(scene != nullptr);

  gazebo::rendering::VisualPtr boxVis = scene->GetVisual("box");
  QVERIFY(boxVis != nullptr);

  auto glWidget = mainWindow->findChild<gazebo::gui::GLWidget *>("GLWidget");
  QVERIFY(glWidget != nullptr);

  // verify actions are not null
  QVERIFY(gazebo::gui::g_arrowAct != nullptr);
  QVERIFY(gazebo::gui::g_rotateAct != nullptr);
  QVERIFY(gazebo::gui::g_translateAct != nullptr);
  QVERIFY(gazebo::gui::g_scaleAct != nullptr);

  // verify initial action state
  QVERIFY(gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(!gazebo::gui::g_rotateAct->isChecked());
  QVERIFY(!gazebo::gui::g_translateAct->isChecked());
  QVERIFY(!gazebo::gui::g_scaleAct->isChecked());

  // select a model in arrow mode
  QTest::mouseMove(glWidget,
      QPoint(glWidget->width()*0.5, glWidget->height()*0.5));
  QTest::mouseClick(glWidget, Qt::LeftButton, 0,
      QPoint(glWidget->width()*0.5, glWidget->height()*0.5));
  QVERIFY(boxVis->GetHighlighted());

  // switch to translate mode
  QTest::keyClick(glWidget, 't', Qt::NoModifier, 100);

  // verify translate action is checked
  QVERIFY(!gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(gazebo::gui::g_translateAct->isChecked());
  QVERIFY(!gazebo::gui::g_rotateAct->isChecked());
  QVERIFY(!gazebo::gui::g_scaleAct->isChecked());

  // switch to rotate mode
  QTest::keyClick(glWidget, 'r', Qt::NoModifier, 100);

  // verify rotate action is checked
  QVERIFY(!gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(!gazebo::gui::g_translateAct->isChecked());
  QVERIFY(gazebo::gui::g_rotateAct->isChecked());
  QVERIFY(!gazebo::gui::g_scaleAct->isChecked());

  // switch to scale mode
  QTest::keyClick(glWidget, 's', Qt::NoModifier, 100);

  // verify scale action is checked
  QVERIFY(!gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(!gazebo::gui::g_translateAct->isChecked());
  QVERIFY(!gazebo::gui::g_rotateAct->isChecked());
  QVERIFY(gazebo::gui::g_scaleAct->isChecked());

  // try a reset and make sure the rotate mode is not triggered
  QTest::keyClick(glWidget, 'r', Qt::ControlModifier, 100);

  // verify rotate action is not checked
  QVERIFY(!gazebo::gui::g_arrowAct->isChecked());
  QVERIFY(!gazebo::gui::g_translateAct->isChecked());
  QVERIFY(!gazebo::gui::g_rotateAct->isChecked());
  QVERIFY(gazebo::gui::g_scaleAct->isChecked());

  delete mainWindow;
  mainWindow = nullptr;
}

/////////////////////////////////////////////////
void ModelManipulationTest::GlobalLocalFrames()
{
  this->resMaxPercentChange = 5.0;
  this->shareMaxPercentChange = 2.0;

  this->Load("worlds/shapes.world", true, false, false);

  gazebo::gui::MainWindow *mainWindow = new gazebo::gui::MainWindow();
  QVERIFY(mainWindow != NULL);
  // Create the main window.
  mainWindow->Load();
  mainWindow->Init();
  mainWindow->show();

  // Get the user camera and scene
  gazebo::rendering::UserCameraPtr cam = gazebo::gui::get_active_camera();
  QVERIFY(cam != NULL);
  gazebo::rendering::ScenePtr scene = cam->GetScene();
  QVERIFY(scene != NULL);

  this->ProcessEventsAndDraw(mainWindow);

  std::string modelName = "box";
  gazebo::rendering::VisualPtr modelVis = scene->GetVisual(modelName);
  QVERIFY(modelVis != NULL);

  // move camera to look at the shapes from +x
  cam->SetWorldPose(ignition::math::Pose3d(
      ignition::math::Vector3d(5, 0.0, 0.5),
      ignition::math::Quaterniond(0, 0, 3.14)));

  // set initial model rotation to -45 degrees around x
  modelVis->SetWorldRotation(ignition::math::Quaterniond(-0.7854, 0, 0));

  auto glWidget = mainWindow->findChild<gazebo::gui::GLWidget *>("GLWidget");
  QVERIFY(glWidget != NULL);

  this->ProcessEventsAndDraw(mainWindow);

  // pick the box model - the translate visual should now be attached at
  // 45 degree angle to the
  auto pickPt = cam->Project(modelVis->GetWorldPose().pos.Ign());
  auto pt = QPoint(pickPt.X(), pickPt.Y());
  QTest::mouseMove(glWidget, pt);
  QTest::mouseClick(glWidget, Qt::LeftButton, 0, pt);

  this->ProcessEventsAndDraw(mainWindow, 10, 30);

  QVERIFY(modelVis->GetHighlighted());

  // manipulate model in translate mode
  gazebo::gui::g_translateAct->trigger();

  this->ProcessEventsAndDraw(mainWindow, 10, 30);

  auto initialPos = modelVis->GetWorldPose().pos.Ign();

  // move the box in +z in local frame
  auto startPos = modelVis->GetWorldPose().pos.Ign() +
      modelVis->GetWorldPose().rot.Ign() *
      ignition::math::Vector3d(0.0, 0, 0.8);
  auto startPt = cam->Project(startPos);
  auto endPos = modelVis->GetWorldPose().pos.Ign() +
      modelVis->GetWorldPose().rot.Ign() *
      ignition::math::Vector3d(0.0, 0, 1.0);
  auto endPt = cam->Project(endPos);
  MouseDrag(glWidget, Qt::LeftButton, Qt::NoModifier, startPt, endPt);

  this->ProcessEventsAndDraw(mainWindow, 10, 30);

  // verify the box has moved
  auto boxNewPos = modelVis->GetWorldPose().pos.Ign();
  QVERIFY(ignition::math::equal(boxNewPos.X(), initialPos.X()));
  QVERIFY(boxNewPos.Y() > initialPos.Y());
  QVERIFY(boxNewPos.Z() > initialPos.Z());

  initialPos = boxNewPos;

  // now move the box in -z in global frame
  startPos = modelVis->GetWorldPose().pos.Ign() +
      ignition::math::Vector3d(0.0, 0.0, 1.0);
  startPt = cam->Project(startPos);
  endPos =
      modelVis->GetWorldPose().pos.Ign() +
          ignition::math::Vector3d(0.0, 0.0, 0.8);
  endPt = cam->Project(endPos);

  QTest::keyPress(glWidget, Qt::Key_Shift, Qt::NoModifier, 100);
  this->ProcessEventsAndDraw(mainWindow, 10, 30);
  MouseDrag(glWidget, Qt::LeftButton, Qt::ShiftModifier, startPt, endPt);
  this->ProcessEventsAndDraw(mainWindow, 10, 30);
  QTest::keyRelease(glWidget, Qt::Key_Shift, Qt::NoModifier, 100);

  this->ProcessEventsAndDraw(mainWindow, 10, 30);

  // verify the box has moved
  boxNewPos = modelVis->GetWorldPose().pos.Ign();
  QVERIFY(ignition::math::equal(boxNewPos.X(), initialPos.X()));
  QVERIFY(ignition::math::equal(boxNewPos.Y(), initialPos.Y()));
  QVERIFY(boxNewPos.Z() < initialPos.Z());

  initialPos = boxNewPos;

  // try the local frame again
  startPos = modelVis->GetWorldPose().pos.Ign() +
      modelVis->GetWorldPose().rot.Ign() *
      ignition::math::Vector3d(0.0, 0, 0.8);
  startPt = cam->Project(startPos);
  endPos = modelVis->GetWorldPose().pos.Ign() +
      modelVis->GetWorldPose().rot.Ign() *
      ignition::math::Vector3d(0.0, 0, 1.0);
  endPt = cam->Project(endPos);
  MouseDrag(glWidget, Qt::LeftButton, Qt::NoModifier, startPt, endPt);

  this->ProcessEventsAndDraw(mainWindow, 10, 30);

  // verify the box has moved
  boxNewPos = modelVis->GetWorldPose().pos.Ign();

  QVERIFY(ignition::math::equal(boxNewPos.X(), initialPos.X()));
  QVERIFY(boxNewPos.Y() > initialPos.Y());
  QVERIFY(boxNewPos.Z() > initialPos.Z());

  cam->Fini();
  mainWindow->close();
  delete mainWindow;
}

// Generate a main function for the test
QTEST_MAIN(ModelManipulationTest)