forked from openkylin/platform_build
Remove the vbox target from the build system.
I've been told this is no longer in use, and it's the only user of
external/grub, which is distressingly out of date.
Change-Id: I434a55e0d68f6db97fa71e294e983ff1802e9ba6
(cherry picked from commit de21059acf)
This commit is contained in:
Dan Albert
parent
48c37182f0
commit
b7af531ecc
|
|
@ -476,7 +476,6 @@ add_lunch_combo aosp_mips-eng
|
|||
add_lunch_combo aosp_mips64-eng
|
||||
add_lunch_combo aosp_x86-eng
|
||||
add_lunch_combo aosp_x86_64-eng
|
||||
add_lunch_combo vbox_x86-eng
|
||||
|
||||
function print_lunch_menu()
|
||||
{
|
||||
|
|
|
|||
|
|
@ -1 +0,0 @@
|
|||
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
#
|
||||
# IA target for VitualBox
|
||||
#
|
||||
|
||||
TARGET_ARCH=x86
|
||||
TARGET_COMPRESS_MODULE_SYMBOLS := false
|
||||
TARGET_NO_RECOVERY := true
|
||||
TARGET_HARDWARE_3D := false
|
||||
BOARD_USES_GENERIC_AUDIO := true
|
||||
USE_CAMERA_STUB := true
|
||||
TARGET_CPU_ABI := x86
|
||||
TARGET_USERIMAGES_USE_EXT4 := true
|
||||
TARGET_BOOTIMAGE_USE_EXT2 := true
|
||||
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
|
||||
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
|
||||
|
||||
# For VirtualBox and likely other emulators
|
||||
BOARD_INSTALLER_CMDLINE := init=/init console=ttyS0 console=tty0 vga=788 verbose
|
||||
BOARD_KERNEL_CMDLINE := init=/init qemu=1 console=tty0 vga=788 verbose androidboot.hardware=vbox_x86 androidboot.console=tty0 android.qemud=tty0
|
||||
TARGET_USE_DISKINSTALLER := true
|
||||
|
||||
TARGET_DISK_LAYOUT_CONFIG := build/target/board/vbox_x86/disk_layout.conf
|
||||
BOARD_BOOTIMAGE_MAX_SIZE := 8388608
|
||||
BOARD_SYSLOADER_MAX_SIZE := 7340032
|
||||
BOARD_FLASH_BLOCK_SIZE := 512
|
||||
# 50M
|
||||
BOARD_USERDATAIMAGE_PARTITION_SIZE := 52428800
|
||||
# 500M
|
||||
BOARD_INSTALLERIMAGE_PARTITION_SIZE := 524288000
|
||||
TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
|
||||
# Reserve 265M for the system partition
|
||||
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 268435456
|
||||
|
||||
WITH_DEXPREOPT := false
|
||||
|
||||
# The eth0 device should be started with dhcp on boot.
|
||||
# Useful for emulators that don't provide a wifi connection.
|
||||
NET_ETH0_STARTONBOOT := true
|
||||
|
||||
ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.heapsize=32m
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
The "vbox_x86" product defines a non-hardware-specific target intended
|
||||
to run on the VirtualBox emulator.
|
||||
|
||||
Most of the Android devices (networking, phones, sound, etc) do not work.
|
||||
|
||||
ADB via ethernet works with this target. You can use 'adb install' to
|
||||
test applications that do not require network, phone or sound support.
|
||||
This emulation is useful because VirtualBox runs much faster then does the
|
||||
QEMU emulators (at least until a KVM enabled QEMU emulator is available).
|
||||
|
|
@ -1,39 +0,0 @@
|
|||
#
|
||||
# Copyright (C) 2009 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
|
||||
# This is a build configuration for the product aspects that
|
||||
# are specific to the emulator.
|
||||
|
||||
LOCAL_PATH := $(call my-dir)
|
||||
|
||||
PRODUCT_PROPERTY_OVERRIDES := \
|
||||
ro.ril.hsxpa=1 \
|
||||
ro.ril.gprsclass=10 \
|
||||
ro.adb.qemud=1
|
||||
|
||||
LOCAL_KERNEL := prebuilts/qemu-kernel/x86/kernel-vbox
|
||||
|
||||
PRODUCT_COPY_FILES := \
|
||||
device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
|
||||
device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
|
||||
frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
|
||||
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
|
||||
frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
|
||||
device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
|
||||
build/target/board/vbox_x86/init.vbox_x86.rc:root/init.vbox_x86.rc \
|
||||
$(LOCAL_KERNEL):kernel
|
||||
|
||||
$(call inherit-product, frameworks/native/build/phone-xhdpi-1024-dalvik-heap.mk)
|
||||
|
|
@ -1,76 +0,0 @@
|
|||
# Best to align all partion start/ends on a cylinder boundary (fdisk prefers it)
|
||||
# 512 bytes/sector
|
||||
# 63 sectors/track
|
||||
# 32 tracks/cylinder
|
||||
|
||||
# LBAs are in 'k', so...
|
||||
# 1008 blocks (1k each) (1032192 bytes) / cylinder
|
||||
|
||||
device {
|
||||
|
||||
path /dev/block/sda
|
||||
|
||||
scheme mbr
|
||||
|
||||
# bytes in a disk sector (== 1 LBA), must be a power of 2!
|
||||
sector_size 512
|
||||
|
||||
# Start_lba should be on a cylindar boundary.
|
||||
start_lba 63
|
||||
|
||||
# Autodetect disk size if == 0
|
||||
num_lba 0
|
||||
|
||||
partitions {
|
||||
# /dev/sdX1
|
||||
sysloader {
|
||||
active y
|
||||
type linux
|
||||
# 8 cyls in length... about 8M
|
||||
len 8064
|
||||
}
|
||||
|
||||
# /dev/sdX2
|
||||
recovery {
|
||||
active y
|
||||
type linux
|
||||
# 8 cyls in length... about 8M
|
||||
len 8064
|
||||
}
|
||||
|
||||
# /dev/sdX3
|
||||
boot {
|
||||
active y
|
||||
type linux
|
||||
# 8 cyls in length... about 8M
|
||||
len 8064
|
||||
}
|
||||
|
||||
# /dev/sdX4
|
||||
# (extended partion begins)
|
||||
|
||||
# /dev/sdX5
|
||||
cache {
|
||||
type linux
|
||||
len 512M
|
||||
}
|
||||
|
||||
# /dev/sdX6
|
||||
system {
|
||||
type linux
|
||||
len 512M
|
||||
}
|
||||
|
||||
# /dev/sdX7
|
||||
third_party {
|
||||
type linux
|
||||
len 512M
|
||||
}
|
||||
|
||||
# /dev/sdX8
|
||||
data {
|
||||
type linux
|
||||
len -1
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,90 +0,0 @@
|
|||
on early-init
|
||||
export EXTERNAL_STORAGE /mnt/sdcard
|
||||
mkdir /mnt/sdcard 0000 system system
|
||||
# for backwards compatibility
|
||||
symlink /mnt/sdcard /sdcard
|
||||
|
||||
on boot
|
||||
setprop ARGH ARGH
|
||||
setprop net.eth0.gw 10.0.2.2
|
||||
setprop net.eth0.dns1 10.0.2.3
|
||||
setprop net.gprs.local-ip 10.0.2.15
|
||||
setprop ro.radio.use-ppp no
|
||||
setprop ro.build.product generic
|
||||
setprop ro.product.device generic
|
||||
|
||||
# fake some battery state
|
||||
setprop status.battery.state Slow
|
||||
setprop status.battery.level 5
|
||||
setprop status.battery.level_raw 50
|
||||
setprop status.battery.level_scale 9
|
||||
|
||||
# disable some daemons the emulator doesn't want
|
||||
stop dund
|
||||
stop akmd
|
||||
|
||||
# start essential services
|
||||
start qemud
|
||||
start goldfish-logcat
|
||||
# start goldfish-setup
|
||||
start netcfg
|
||||
|
||||
setprop ro.setupwizard.mode EMULATOR
|
||||
|
||||
on fs
|
||||
# mount sda (system) and sdb (data) partitions
|
||||
mount ext4 /dev/block/sda6 /system
|
||||
mount ext4 /dev/block/sda6 /system ro remount
|
||||
mount ext4 /dev/block/sdb6 /data nosuid nodev
|
||||
mount ext4 /dev/block/sdb7 /cache nosuid nodev
|
||||
|
||||
# enable Google-specific location features,
|
||||
# like NetworkLocationProvider and LocationCollector
|
||||
setprop ro.com.google.locationfeatures 1
|
||||
|
||||
# For the emulator, which bypasses Setup Wizard, you can specify
|
||||
# account info for the device via these two properties. Google
|
||||
# Login Service will insert these accounts into the database when
|
||||
# it is created (ie, after a data wipe).
|
||||
#
|
||||
# setprop ro.config.hosted_account username@hosteddomain.org:password
|
||||
# setprop ro.config.google_account username@gmail.com:password
|
||||
#
|
||||
# You MUST have a Google account on the device, and you MAY
|
||||
# additionally have a hosted account. No other configuration is
|
||||
# supported, and arbitrary breakage may result if you specify
|
||||
# something else.
|
||||
|
||||
service goldfish-setup /system/etc/init.goldfish.sh
|
||||
user root
|
||||
group root
|
||||
oneshot
|
||||
|
||||
# The qemu-props program is used to set various system
|
||||
# properties on boot. It must be run early during the boot
|
||||
# process to avoid race conditions with other daemons that
|
||||
# might read them (e.g. surface flinger), so define it in
|
||||
# class 'core'
|
||||
#
|
||||
service qemu-props /system/bin/qemu-props
|
||||
class core
|
||||
user root
|
||||
group root
|
||||
oneshot
|
||||
|
||||
service qemud /system/bin/qemud
|
||||
socket qemud stream 666
|
||||
oneshot
|
||||
|
||||
# -Q is a special logcat option that forces the
|
||||
# program to check wether it runs on the emulator
|
||||
# if it does, it redirects its output to the device
|
||||
# named by the androidboot.console kernel option
|
||||
# if not, it simply exits immediately
|
||||
|
||||
service goldfish-logcat /system/bin/logcat -Q
|
||||
oneshot
|
||||
|
||||
# Enable networking so that adb can connect
|
||||
service netcfg /system/bin/netcfg eth0 dhcp
|
||||
oneshot
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
#
|
||||
# system.prop for generic sdk
|
||||
#
|
||||
|
||||
rild.libpath=/system/lib/libreference-ril.so
|
||||
rild.libargs=-d /dev/ttyS0
|
||||
|
|
@ -60,7 +60,6 @@ PRODUCT_MAKEFILES := \
|
|||
$(LOCAL_DIR)/aosp_mips64.mk \
|
||||
$(LOCAL_DIR)/aosp_x86_64.mk \
|
||||
$(LOCAL_DIR)/full_x86_64.mk \
|
||||
$(LOCAL_DIR)/vbox_x86.mk \
|
||||
$(LOCAL_DIR)/sdk_phone_armv7.mk \
|
||||
$(LOCAL_DIR)/sdk_phone_x86.mk \
|
||||
$(LOCAL_DIR)/sdk_phone_mips.mk \
|
||||
|
|
|
|||
|
|
@ -1,36 +0,0 @@
|
|||
#
|
||||
# Copyright (C) 2009 The Android Open Source Project
|
||||
#
|
||||
# Licensed under the Apache License, Version 2.0 (the "License");
|
||||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
|
||||
# This is a build configuration for a full-featured build of the
|
||||
# Open-Source part of the tree. It's geared toward a US-centric
|
||||
# build quite specifically for the emulator, and might not be
|
||||
# entirely appropriate to inherit from for on-device configurations.
|
||||
ifdef NET_ETH0_STARTONBOOT
|
||||
PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
|
||||
endif
|
||||
|
||||
$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base.mk)
|
||||
$(call inherit-product, $(SRC_TARGET_DIR)/board/vbox_x86/device.mk)
|
||||
|
||||
PRODUCT_PACKAGES += \
|
||||
camera.vbox_x86 \
|
||||
lights.vbox_x86 \
|
||||
gps.vbox_x86 \
|
||||
sensors.vbox_x86
|
||||
|
||||
PRODUCT_NAME := vbox_x86
|
||||
PRODUCT_DEVICE := vbox_x86
|
||||
PRODUCT_MODEL := Full Android on x86 VirtualBox
|
||||
Loading…
Reference in New Issue