Since R3 and B5 have different antenna patterns, separating this config.
Bug: 160089647
Test: Ensure ANTENNA_INFO is enabled and VTS is PASS
Change-Id: I862b1237053d075ef137f832a90c1bc870e1e341
AudioTrack/AudioRecord timestamps are off by 30ms
when tested with the Clarity app
Bug: 158430162
Test: Manual test with Clarity apk
Signed-off-by: millerliang <millerliang@google.com>
Change-Id: I5ce5027badcf4de9f5047936a3575baef421d26c
In order to clarify and improve video jank problem, we plan to add
some CamNode log into bugreport
Bug: 158243741
Change-Id: Idb1cf97c321027cdc7651700d32fe0cb92ab016b
The patch provides the compensation images and threshold configurations
for R3.
Bug: 151886711
Test: Enale HBM and check compensation layer
Change-Id: Ibf0cc557d385953beea28f7af6b18e3940882250
Add the Bluetooth SAR table for JP and update SAR table for EU, US and
the defautl table
Bug: 160414534
Test: Manual
Change-Id: Ic3523e2ba20d92a23e3e7d0aa3e7b1cdc3cbe868
Changes are
- PICL enabled.
- Correct values entered so that this will operate as a default calibration file for service centers
Bug: 153562615
Test: manual audio tests
Signed-off-by: juyuchen <juyuchen@google.com>
Change-Id: I299a311ef22dde2909b83442d708cc29a62f235a
Follow legacy Pixels to disable AoD
Bug: 149363453
Test: Check if AoD is off by default
Change-Id: I8b10493ab55e98a6fb67ff39d0b76d360e1d92f0
Signed-off-by: edisonchou <edisonchou@google.com>
1. Correct device version comparison method
2. Support proto device to use previous target G
Bug: 157610908
Test: use proto and dvt device to check it
Signed-off-by: chasewu <chasewu@google.com>
Change-Id: Id5de9f6de3788284cd56908b3189b1f8cefc8ab4
- Allow thermal prop to disable/enable skin-therm-cpu tz.
- Allow thermal prop to disable/enable camera-critical tz.
Bug: 156569397
Test: check skin-therm-cpu tz can be disabled/enabled via thermal control
prop.
Test: check camera-critical tz can be disabled/enabled via thermal control
prop.
Change-Id: I0df1dc18552e33552575d0ff346f2f461e85c63c
This reverts commit 845e4be94dd6617f9061bd98ee062ce7de17fefe.
Reason for revert: The tuning for vibration control is done.
Bug: 155831461
Test: Verify by H/W
Change-Id: I8adc2df69bc46f0a90bcd0c8687124454f126db7
Change list is as below:
1. Handsfree SWB
- RX modify DRC
- BVE on
2. BTNB / BTNB-NREC / BTWB / BTWB-NREC Uplink
- WB IIR: modify for SFR
3. Handset Smoothing tuning Downlink
- HANB: max-1 / max-2
- HAWB: max / max-1 / max-2
- HASWB: max-1 / max-2
4. Camcorder
- Upgrade the WNR version from 1.0.2 to 1.0.6
- Update the WNR parameters in camcorder use case ID 61~66
- Update the SURREC parameters in camcorder use case ID 61~66
- Update the IIR parameters in camcorder use case ID 61~66
- Update the Mic Gain parameters in camcorder use case ID 61~63
Bug: 159768812
Bug: 156513851
Test: Verified by H/W
Signed-off-by: Jason Hsu <jasonchhsu@google.com>
Change-Id: I663d41fe87e528aa2ec478744142806aee2086ba
Acocording to the redfin EVT thermal virus test. When skin-therm is
53 degC, the max surface temperature is only 53degC. So, adjust shutdown
threshold to 55 degC and emergency threshold to 53 degC to improvide
the UX.
Bug: 153850974
Test: Test thermalhal shutdown by emul temp
Change-Id: Ia3813e9aa4c7848d1df0a31074534e2870f6b132
Signed-off-by: TeYuan Wang <kamewang@google.com>
Bottom corners on this device are non-square, so rounded_corner_bottom
reflects that.
- Status bar set to 145px (52dp)
- Updated bottom and top paths
- Status bar top padding set to 2dp for better centering of icons
Test: visual
Bug: 156017682
Bug: 156017028
Bug: 156016494
Bug: 157612517
Change-Id: I0883b97569e7174bf2a67611ca03137da2f37894
Joe Huang