Group things together where it makes sense, avoid unnecessary
uses of 'else if', plus other tweaks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The current defaults, that can be altered on a per-architecture
basis, are derived from the historical x86 behavior.
Every time support for a new architecture is added to libvirt,
care must be taken to override these default: if that doesn't
happen, guests will end up with additional hardware, which is
something that's generally undesirable.
Turn things around, and require architectures to explicitly
ask for the devices to be created by default instead. The
behavior for existing architectures is preserved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
They reference functions that have since been renamed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These are similar to the minimal cases that we just introduced,
but are intended to demonstrate what device or controller model
libvirt will choose when one is not provided by the user.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have just added a number of test cases that supersede it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently have a single test case called "minimal", which
suffers from two big flaws:
* it's limited to the x86_64/pc machine type;
* it explicitly enables a number of devices.
Add several test cases, one for each of the architectures and
machine types that we have good support for.
Unlike the existing one, they're *really* minimal: no devices
or controllers at all are present in the input XML. So the new
test cases demonstrate exactly what devices and controller
libvirt will decide to add automatically.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This demonstrates that on aarch64, where a native panic device
doesn't exist, it's necessary for the user to specify the model
explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For q35 guests, we normally add a USB controller by default,
but there's a scenario in which we can decide to skip it. Add
test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have an explicit test case for the feature in
genericxml2xmltest, we can drop a bunch of duplicated accidental
coverage from qemuxmlconftest.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have a few cases in qemuxmlconftest that cover the ability
to set <title> and <description> for a guest as a side effect.
Introduce an explicit case for the functionality in
genericxml2xmltest, as it's not specific to the QEMU driver.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is pretty straightforward.
Resolves: https://issues.redhat.com/browse/RHEL-15316
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The QEMU_CAPS_DEVICE_VIRTIO_MEM_PCI_DYNAMIC_MEMSLOTS reflects
whether QEMU is capable of .dynamic-memslots for virtio-mem.
Use it when validating domain configuration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting from v8.2.0-rc0~74^2~2 QEMU has .dynamic-memslots
attribute for virtio-mem-pci device. Introduce a capability which
reflects that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced in v8.2.0-rc0~74^2~2, QEMU now allows setting
.dynamic-memslots attribute for virtio-mem-pci devices. When
turned on, it allows memory exposed to guest to be split into
multiple memslots and thus smaller memory footprint (see the
original commit for detailed explanation).
Therefore, introduce new <target/> attribute which will control
that QEMU knob.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v9.10.0-rc1~103 the remote driver was switched to g_auto() for
client RPC return parameters. But whilst doing so a small bug
slipped in: previously, when virDomainGetBlockIoTune() was called
with *nparams == 0, the function set *nparams to the number of
supported params and zero was returned (so that client can
allocate memory and call the API second time). IOW - the usual,
old style of APIs where we didn't want to allocate memory on
caller's behalf. But because of this bug, a negative one is
returned instead.
Fixes: 501825011c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a number of cases in which we want to test both the
normal behavior and the ABI_UPDATE behavior for the same input
XML.
The way this is currently implemented is ad-hoc, and involves
symlinking the input XML as well as coming up with an
alternative name for the ABI_UPDATE variant: in most cases the
-abi-update suffix is added, but since this is not enforced
there are a couple of cases where we do something else instead.
To make things simpler and more consistent, implement the
naming convention at the macro level. This way, we no longer
need to create any symlinks for the input file, and the output
files are automatically named correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The input file is a symlink for the ppc64-usb-controller input
file, so the output files are identical as well. It's just an
unnecessary duplicate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Encryption secrets are considered a format dependency, even
when being used by the storage node itself, as in the case of
using encryption engine=librbd.
Currently, the storage node is created (blockdev-add) before
creating the format dependencies (including encryption secrets).
As a result, when trying to perform a blockcopy when the target
disk uses librbd encryption, an error of this form is returned:
"error: internal error: unable to execute QEMU command 'blockdev-add': No secret with id 'libvirt-5-format-encryption-secret0'"
To overcome this error, we change the order of commands so that
format dependencies are created BEFORE creating the storage node.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
After v9.1.0-rc1~116 we track whether it's us who created a
macvtap or not. But when updating a vNIC its definition might be
replaced with a new one (though, ifname is not allowed to
change), e.g. to reflect new QoS, link state, etc.
Now, the fact whether we created macvtap for given vNIC is stored
in net->privateData->created. And replacing definition is done by
simply freeing the old definition and making the pointer point to
the new one. But this does not preserve the 'created' flag, which
in turn means when a domain is shutting off, the macvtap is not
removed (see loop inside of qemuProcessStop()).
Copy this flag into new definition and leave a note in
_qemuDomainNetworkPrivate struct.
Fixes: 61d1b9e659
Resolves: https://issues.redhat.com/browse/RHEL-22714
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out, there are two ways to specify an empty CD-ROM drive in
a .vmx file:
1) .fileName = "emptyBackingString"
2) .fileName = ""
While we do parse 1) successfully, the code does not accept 2)
and an error is reported. Modify the code to treat both cases the
same.
Resolves: https://issues.redhat.com/browse/RHEL-19380
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt created linux bridge has a configurable value "delay",
the default value is "0", but it will not take effect. That's because
kernel has a minimum value for linux bridge. Add some explanation
about it in the document.
Signed-off-by: Yalan Zhang <yalzhang@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After guest is started, or we are reconnecting to already running
one (after daemon restart), qemuProcessRefreshRxFilters() is
called to refresh rx-filters (basically MAC addresses of guest
NICs) as they might have changed while we were not running (for
the case when reconnecting to an already running guest), or we
need to enable them by running a command (for freshly started
guest - see processNicRxFilterChangedEvent()).
Now, our XML parser allowed trustGuestRxFilters attribute for all
types and models of <interface/> while in reality, only virtio
model AND TUN/TAP based types can see MAC address changes. For
other combinations, QEMU reports an error.
This all means that when the daemon is restarted and it
reconnects to a guest with, well invalid configuration, or when
such guest is restored from a saved image, or migrated then we
issue the monitor command, to which QEMU replies with an error
which is then propagated to users:
error: internal error: unable to execute QEMU command 'query-rx-filter': invalid net client name: hostdev0
While on one hand users should fix their configuration (and after
v10.0.0-rc1~123 they can do that even on live domains), libvirt
can also has some logic built in that prevent issuing the command
in the first place (for obviously wrong cases).
Fixes: 060d4c83ef
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This should fix build failures when a daemon code is compiled before the
included *_protocol.h headers are ready, such as:
FAILED: src/virtqemud.p/remote_remote_daemon_config.c.o
../src/remote/remote_daemon_config.c: In function ‘daemonConfigNew’:
../src/remote/remote_daemon_config.c:111:30: error:
‘REMOTE_AUTH_POLKIT’ undeclared (first use in this function)
111 | data->auth_unix_rw = REMOTE_AUTH_POLKIT;
| ^~~~~~~~~~~~~~~~~~
../src/remote/remote_daemon_config.c:111:30: note: each undeclared
identifier is reported only once for each function it appears in
../src/remote/remote_daemon_config.c:115:30: error:
‘REMOTE_AUTH_NONE’ undeclared (first use in this function)
115 | data->auth_unix_rw = REMOTE_AUTH_NONE;
| ^~~~~~~~~~~~~~~~
../src/remote/remote_daemon_config.c: In function
‘daemonConfigLoadOptions’:
../src/remote/remote_daemon_config.c:252:31: error:
‘REMOTE_AUTH_POLKIT’ undeclared (first use in this function)
252 | if (data->auth_unix_rw == REMOTE_AUTH_POLKIT) {
| ^~~~~~~~~~~~~~~~~~
or
FAILED: src/virtqemud.p/remote_remote_daemon_dispatch.c.o
In file included from ../src/remote/remote_daemon.h:28,
from ../src/remote/remote_daemon_dispatch.c:26:
src/remote/lxc_protocol.h:13:5: error:
unknown type name ‘remote_nonnull_domain’
13 | remote_nonnull_domain dom;
| ^~~~~~~~~~~~~~~~~~~~~
In file included from ../src/remote/remote_daemon.h:29,
from ../src/remote/remote_daemon_dispatch.c:26:
src/remote/qemu_protocol.h:13:5: error:
unknown type name ‘remote_nonnull_domain’
13 | remote_nonnull_domain dom;
| ^~~~~~~~~~~~~~~~~~~~~
src/remote/qemu_protocol.h:14:5: error:
unknown type name ‘remote_nonnull_string’
14 | remote_nonnull_string cmd;
| ^~~~~~~~~~~~~~~~~~~~~
...
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These values are currently unsupported for ssh disks, and in fact aren't
even parsed for ssh disks. So while this didn't result in any test
errors, we can remove them from the test input files.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
When trying to start nbdkit-backed disks in backing chains, we were
accidentally always checking the private data of the top of the chain
instead of using the loop variable.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Division between integers will also be integer.
Thus, to preserve fractional part explicitly
convert first operand to double.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 28d54aab05 ("examples: Introduce domtop")
Signed-off-by: Egor Makrushin <emakrushin@astralinux.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since commit 4af3cbafdd the function always returns 0, so it is
possible to make this function void and remove return value checks.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Unify the output directory. Symlinks needed to be adapted to work
properly, but the 'qemuxml2argvdata' symlink can now be removed.
The virschematest exceptions needed to be moved to the proper directory
once the files are moved.
The unification of the output directory now also ensures that files
won't be forgotten once tests are removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unify the naming of the data directory with the test name.
'tests/qemuxml2argvdata' is for the time converted to a symlink to
'qemuxmlconfdata', to preserve the symlinks in
'tests/qemuxml2xmloutdata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Remove leftover output files. The list of files was identified by
temporarily hacking testConfXMLEnumerate to also enumerate
'tests/qemuxml2xmloutdata' directory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Include also the output files in the validation of used files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Populate the output filename strings only when the files are expected to
exist, so that other logic can be based on the presence of the strings
rather than having to re-check the test flags for expected state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's plenty symlinks in qemuxml2argvdata and qemuxml2xmlout
directories pointing to other files in the same directory. It makes no
sense to check those files twice, thus we can simply skip symlinks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Current implementation of virDomainMemoryDefCheckConflict() does
only a one way comparison, i.e. if there's a memory device within
def->mems[] which address falls in [mem->address, mem->address +
mem->size] range (mem is basically an iterator within
def->mems[]). And for static XML this works just fine. Problem is
with hot/cold plugging of a memory device. Then mem points to
freshly parsed memory device and these half checks are
insufficient. Not only we must check whether an existing memory
device doesn't clash with freshly parsed memory device, but also
whether freshly parsed memory device does not fall into range of
already existing memory device.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
meson wraps python scripts already on win32, so we end up with these
failing commands:
[185/868] Generating src/rpc/virnetprotocol.h with a custom command
FAILED: src/rpc/virnetprotocol.h
"sh" "libvirt/scripts/meson-python.sh" "F:/msys64/ucrt64/bin/python3.EXE" "F:/msys64/ucrt64/bin/python.exe" "libvirt/scripts/rpcgen/main.py" "--mode=header" "../src/rpc/virnetprotocol.x" "src/rpc/virnetprotocol.h"
SyntaxError: Non-UTF-8 code starting with '\x90' in file F:/msys64/ucrt64/bin/python.exe on line 1, but no encoding declared; see https://peps.python.org/pep-0263/ for details
The issue was introduced in a62486b95f commit.
These changes are similar as e06beacec2 commit.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Adapt the configuration of redirects from the server hosting libvirt.org
The redirect to the 'libvirt-console-proxy' Golang module is not adapted
as it doesn't exist on the current server.
NOTES:
- The redirects are currently configured for hosting via the
'gitlab.io/libvirt' URI. For hosting via custom domain it will need
to be rewritten to drop the '/libvirt' prefixes.
- gitlab pages doesn't currently support redirects to outside content,
thus most of the redirects don't actually work:
https://gitlab.com/gitlab-org/gitlab-pages/-/issues/601
- The redirects file is only installed in the webpage job but is not
actually distributed.
- The validity of the redirects can be checked by visiting:
https://libvirt.gitlab.io/_redirects
Having them installed allows us to validate them before we'll be
switching to use gitlab pages completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On pushes to master publish the webpage (built in the 'website_job' job)
via gitlab pages. The 'pages' job uses the default image that gitlab
assumes as it's consuming artifacts from an existing job and naming
them properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The latest lcitool merged the 'prebuilt-env' and 'local-env' jobs into
one which use variables to pick up the right environment and steps
rather than duplicating everything.
Regenerate the generated job definitions, fix the helper definitions
and also fix the manually defined jobs (website-job).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani