We currently list the locale file paths via a wildcard in %files, but the
normal pattern for mingw RPMs in Fedora is to use %mingw_find_lang.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The spec file contains inconsistent use of blank lines. While trying to
make significant changes to the file, I found it hurts both readability
and maintainability. Remove blank lines that interrupt the overall flow
and consistency.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The spec file uses both "libvirt" and "%{name}", but in reality the
expanded value of %{name} will never change. Drop the macro in favor
of the explicit and more readable "libvirt".
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Remove %triggerpostun for the daemon package. Upgrades from
libvirt < 1.3.0 are now unlikely.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virt-qemu-sev-validate program will compare a reported SEV/SEV-ES
domain launch measurement, to a computed launch measurement. This
determines whether the domain has been tampered with during launch.
This initial implementation requires all inputs to be provided
explicitly, and as such can run completely offline, without any
connection to libvirt.
The tool is placed in the libvirt-client-qemu sub-RPM since it is
specific to the QEMU driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt-daemon subpackage contains libvirt-guests.sh script (used by
libvirt-guests service), which requires virsh to actually work. But
since dynamic libraries were separated from libvirt-client to
libvirt-libs more than 6 years ago, libvirt-daemon no longer requires
virsh to be installed. So unless libvirt-client is explicitly installed
(either manually or by installing the libvirt meta package),
libvirt-guests will not work.
Just adding libvirt-client as a dependency of libvirt-daemon would go
against the original idea behind splitting libvirt-client: users may not
want to install or use any client binaries on the host where the daemon
runs (either they just use various language bindings or access the
daemon remotely). To solve this we could possibly turn libvirt-daemon
into an empty package and separate the daemons and libvirt-guests into
subpackages to make sure we support both use cases, but marking
libvirt-client as Recommended for libvirt-daemon does the same job in a
much simpler way.
https://bugzilla.redhat.com/show_bug.cgi?id=2136591
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This zone will be used for the routed network by default.
Note that this zone definition omits "forward" aka intra-zone
forwarding, because it requires firewalld >= 0.9.0.
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
The %{release} part of the requirement is just wrong as python bindings
are not rebuilt anytime libvirt release is increased, which means the
client-qemu package may require nonexistent release of python bindings.
The %{version} part is not wrong, but it's too strict for no reason as
the virt-qemu-qmp-proxy script will work happily even with ancient
python bindings. And since all distros supported by libvirt.spec already
contain python3-libvirt, we can depend on the first package called this
way.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Bump the minimal required version to 0.56.0. Looking into our CI
this is the oldest version we install.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt provides QMP passthrough APIs for the QEMU driver and these are
exposed in virsh. It is not especially pleasant, however, using the raw
QMP JSON syntax. QEMU has a tool 'qmp-shell' which can speak QMP and
exposes a human friendly interactive shell. It is not possible to use
this with libvirt managed guest, however, since only one client can
attach to the QMP socket at any point in time. While it would be
possible to configure a second QMP socket for a VM, it may not be
an known requirement at the time the guest is provisioned.
The virt-qmp-proxy tool aims to solve this problem. It opens a UNIX
socket and listens for incoming client connections, speaking QMP on
the connected socket. It will forward any QMP commands received onto
the running libvirt QEMU guest, and forward any replies back to the
QMP client. It will also forward back events.
$ virsh start demo
$ virt-qmp-proxy demo demo.qmp &
$ qmp-shell demo.qmp
Welcome to the QMP low-level shell!
Connected to QEMU 6.2.0
(QEMU) query-kvm
{
"return": {
"enabled": true,
"present": true
}
}
Note this tool of course has the same risks as the raw libvirt
QMP passthrough. It is safe to run query commands to fetch information
but commands which change the QEMU state risk disrupting libvirt's
management of QEMU, potentially resulting in data loss/corruption in
the worst case. Any use of this tool will cause the guest to be marked
as tainted as an warning that it could be in an unexpected state.
Since this tool introduces a python dependency it is not desirable
to include it in any of the existing RPMs in libvirt. This tool is
also QEMU specific, so isn't appropriate to bundle with the generic
tools. Thus a new RPM is introduced 'libvirt-clients-qemu', to
contain additional QEMU specific tools, with extra external deps.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We should explicitly depend on this package as we use some macros
defined by files that are installed from systemd-rpm-macros.
Currently the build works only because some of our other build
dependencies pull in systemd which will install systemd-rpm-macros if
rpm-build is installed as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rpmbuild is complaining it's not recommended to have unversioned
Obsoletes. On the other hand using dynamic version/release is a bit too
much as we know in which release a particular subpackage was removed.
Let's just use the corresponding version in both cases to be consistent
with all other Obsoletes in our spec file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
According to repology.org:
RHEL-8: 0.9.4
RHEL-9: 0.9.6
Debian 11: 0.9.5
openSUSE Leap 15.3: 0.8.7
Ubuntu 20.04: 0.9.3
And the rest of distros has something newer anyways. Requiring
0.8.1 or newer allows us to drop the terrible hack where we
rename functions at meson level using #define. Note, 0.8.0 is
the version of libssh where the rename happened. It also allows
us to stick with SHA-256 hash algorithm for public keys.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The sheepdog project is unmaintained, with last commit in 2018 and
numerous unanswered issues reported.
Remove the libvirt storage driver support for it to follow the removal
of the client support in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upstream will be dropping the sheepdog storage backend, so we need to
stop building the package and obsolete it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One specfile containing both native and mingw builds is the
new best practice for Fedora. This reduces the maint burden
and ensures the mingw packages don't fall behind.
Note this adds many more BuildRequires for anyone building
on Fedora, which will now need installing.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The %posttrans scriptlet checks if libvirtd is active within a
condition that is only executed if libvirtd is active. Remove the
duplicate check.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation included in these manual pages is mostly useful
to users of the 'send-key' virsh command, and the virsh manual
page refers to them, so it makes more sense to install them along
with virsh instead of libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This has two advantages: it makes it possible for the admin to
ask rpm what package they belong to, and results in them ending
up with stricter permissions than they would have if we let
libvirt create them at runtime.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The server, not the client, uses local storage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Files like libvirt.conf influence the behavior of the library
itself. The daemon depends on the library, so the directory is
guaranteed to be present both on the client side and on the
server side.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
autotools used to produce those, but meson doesn't.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
'daemon-driver-storage' is just a meta-package, the actual daemon is in
the 'daemon-driver-storage-core' package, so without installing the meta
package the storage daemon is not being enabled.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2025644
Fixes: 50eae3f885, b8ef625544
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's been an optional build time dependency for a long time, so
if Meson couldn't find it the only consequence was that libvirt
would look for it at runtime instead, which is what we are doing
for most of our non-library dependencies anyway.
Since 5c98d1cee0 we've stopped even looking for it at build
time, so there's no point in having it installed in the build
environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We no longer need its contents.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're no longer performing build time detection.
Fixes: 506c3a39d6
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It is only needed if compatibility with clients that have
libvirt < 6.9.0 is required, and can be uninstalled otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reduce the delta in an upcoming change.
No change in behavior intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Fixes: 50eae3f885
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These daemons do not have any support for unprivileged readonly
access, so we must not reference -ro.socket units in scripts.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1945420
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.
Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani