In the past, the preferred policy
(VIR_DOMAIN_NUMATUNE_MEM_PREFERRED) required exactly one (host)
NUMA node. This made sense because:
1) the libnuma API - numa_set_preferred() allowed exactly one
node, because
2) corresponding kernel syscall (__NR_set_mempolicy) accepted
exactly one node (for MPOL_PREFERRED mode).
But things have changed since then. Firstly, kernel introduced
new MPOL_PREFERRED_MANY mode (v5.15-rc1~107^2~21) which was then
exposed in libnuma as numa_set_preferred_many() (v2.0.15~24).
Fortunately, libnuma also exposes numa_has_preferred_many() which
returns whether the kernel has support for the new mode (1) or
not (0).
Putting this all together, we can lift our check for sufficiently
new kernel and libnuma.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151064
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although the qemuMigrationSrcPerformResume actually got called
indirectly via qemuMigrationSrcPerformNative and the recovery process
worked, wrong job phases were used for the "perform" phase, which could
cause issues when libvirt daemon crashed (or was otherwise restarted)
during post-copy recovery.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It will need to be called from a place above its current definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When qemuDomainObjReleaseAsyncJob is called when the current async job
is already released we emit quite useless warning which was implemented
to warn about releasing a job owned by another thread.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function is called even if QEMU reports migration as
postcopy-paused, i.e., it's not migrating anymore. And while changing
the warning, we can drop the part about unattended migration to make the
warning shorter and consistent with qemuMigrationSrcPostcopyFailed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases when the internal state of disks can change
without qemu sending events about it (e.g. a disk can close
during reset). In case this happens, we should emit an event
about the modified disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1824722#c20
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While only a couple of the message types include sensitive data,
the overhead of calling secure erase is not noticable enough
to worry about making the erasure selective per type. Thus it is
simplest to unconditionally securely erase the buffer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer length refers to the allocated buffer memory size,
while the offset refers to have much of the buffer we have
read/written. After reading the message payload we must thus
update the latter.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is available on at least FreeBSD and GLibc >= 2.25.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It may happen that xenlight pkgconfig file does not contain
'xenfirmwaredir' and/or 'libexec_bin' variables, which is okay
and we have code that deals with this situation. But that code is
executed when the queried value is an empty string. This may not
always be the case and we should specifically set 'default_value'
so that the empty string is returned if pkgconfig variable
doesn't exist.
Fixes: 968479adcf
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the formatcaps.rst we give an example output of capabilities.
Well, there are couple of issues with it:
1) We show <features/> nested under /capabilities/host/cpu.
There's no such element and never was.
2) The ordering of elements is corrupted.
3) There is plenty of elements missing.
Fix these by showing an actual output of 'virsh capabilities' as
obtained on my machine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently list the locale file paths via a wildcard in %files, but the
normal pattern for mingw RPMs in Fedora is to use %mingw_find_lang.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_CGROUP_DEVICE constant was introduced to Linux in
commit ebc614f687369f9df99828572b1d85a7c2de3d92
Author: Roman Gushchin <roman.gushchin@linux.dev>
Date: Sun Nov 5 08:15:32 2017 -0500
bpf, cgroup: implement eBPF-based device controller for cgroup v2
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_PROG_QUERY constant was introduced to Linux in
commit defd9c476fa6b01b4eb5450452bfd202138decb7
Author: Alexei Starovoitov <ast@kernel.org>
Date: Mon Oct 2 22:50:26 2017 -0700
libbpf: sync bpf.h
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VHOST_VSOCK_SET_GUEST_CID constant was introduced to Linux in
commit 433fc58e6bf2c8bd97e57153ed28e64fd78207b8
Author: Asias He <asias@redhat.com>
Date: Thu Jul 28 15:36:34 2016 +0100
VSOCK: Introduce vhost_vsock.ko
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The linux/magic.h header has existed since
commit e18fa700c9a31360bc8f193aa543b7ef7b39a06b
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Sep 24 11:13:19 2006 -0400
Move several *_SUPER_MAGIC symbols to include/linux/magic.h.
This is old enough that all our supported platforms can be assumed
to have this header.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The DEVLINK_CMD_ESWITCH_GET constant was introduced to Linux in
commit adf200f31c000d707e4afe238ed1d1199e0cce7c
Author: Jiri Pirko <jiri@mellanox.com>
Date: Thu Feb 9 15:54:33 2017 +0100
devlink: fix the name of eswitch commands
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The headers required by virnetdevbridge.c have all exited since
before Linux moved to git. It is sufficient to check for just
one of them in order to give an error message about needing
kernel headers installed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GET_VLAN_VID_CMD constant has existed since before Linux moved
to git.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GCOALESCE constant has existed since before Linux moved
to git.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GFEATURES constant was introduced to Linux in
commit 5455c6998d34dc983a8693500e4dffefc3682dc5
Author: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Date: Tue Feb 15 16:59:17 2011 +0000
net: Introduce new feature setting ops
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_RXHASH constant was introduced to Linux in
commit b00fabb4020d17bda4bea59507e09fadf573088d
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Mar 29 14:47:27 2010 +0000
netdev: ethtool RXHASH flag
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_NTUPLE constant was introduced to Linux in
commit 15682bc488d4af8c9bb998844a94281025e0a333
Author: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Date: Wed Feb 10 20:03:05 2010 -0800
ethtool: Introduce n-tuple filter programming support
This is old enough that all our supported platforms can be assumed
to have this feature.
A typo in the existing condition "NTUBLE" instead of "NTUPLE" meant the
code was never enabled in the first place, which is an illustration of
why it is worth eliminating redundant conditional checks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_TXVLAN/RXVLAN constants were introduced to Linux in
commit d5dbda23804156ae6f35025ade5307a49d1db6d7
Author: Jesse Gross <jesse@nicira.com>
Date: Wed Oct 20 13:56:07 2010 +0000
ethtool: Add support for vlan accleration.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETH_FLAG_LRO constant was introduced to Linux in
commit 3ae7c0b2e3747b50c3a6c63ebb67469e0a6b3203
Author: Jeff Garzik <jeff@garzik.org>
Date: Wed Aug 15 16:00:51 2007 -0700
[ETHTOOL]: Add ETHTOOL_[GS]FLAGS sub-ioctls
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GFLAGS constant was introduced to Linux in
commit 3ae7c0b2e3747b50c3a6c63ebb67469e0a6b3203
Author: Jeff Garzik <jeff@garzik.org>
Date: Wed Aug 15 16:00:51 2007 -0700
[ETHTOOL]: Add ETHTOOL_[GS]FLAGS sub-ioctls
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GGRO constant was introduced to Linux in
commit b240a0e5644eb817c4a397098a40e1ad42a615bc
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon Dec 15 23:44:31 2008 -0800
ethtool: Add GGRO and SGRO ops
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ETHTOOL_GGSO constant was introduced to Linux in
commit 37c3185a02d4b85fbe134bf5204535405dd2c957
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Jun 22 03:07:29 2006 -0700
[NET]: Added GSO toggle
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
ethtool is a Linux specific feature that has existed since before Linux
moved to git. Checking against SIOCETHTOOL + WITH_STRUCT_IFREQ is
overkill for our needs.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The unshare() syscall was introduced to Linux in
commit 2da436e00f9a5fdd0fb6b31e4b2b2ba82e8f5ab8
Author: JANAK DESAI <janak@us.ibm.com>
Date: Tue Feb 7 12:59:03 2006 -0800
[PATCH] unshare system call -v5: system call registration for i386
This is old enough that all our supported platforms can be assumed
to have this feature. Furthermore, the virprocess.c file was already
using unshare() with nothing more than a #ifdef __linux__ check.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LO_FLAGS_AUTOCLEAR constant was introduced to Linux in
commit 96c5865559cee0f9cbc5173f3c949f6ce3525581
Author: David Woodhouse <dwmw2@infradead.org>
Date: Wed Feb 6 01:36:27 2008 -0800
Allow auto-destruction of loop devices
This is old enough that all our supported platforms can be assumed
to have this feature. For added fun this whole meson check was
semantically insane because EPOLL_CLOEXEC is not a valid arg
to unshare().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The EPOLL_CLOEXEC constant was introduced to Linux in
commit a0998b50c3f0b8fdd265c63e0032f86ebe377dbf
Author: Ulrich Drepper <drepper@redhat.com>
Date: Wed Jul 23 21:29:27 2008 -0700
flag parameters: epoll_create
This is old enough that all our supported platforms can be assumed
to have this feature. For added fun this whole meson check was
semantically insane because EPOLL_CLOEXEC is not a valid arg
to unshare().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LOOP_CTL_GET_FREE constant was introduced to Linux in
commit 770fe30a46a12b6fb6b63fbe1737654d28e84844
Author: Kay Sievers <kay.sievers@vrfy.org>
Date: Sun Jul 31 22:08:04 2011 +0200
loop: add management interface for on-demand device allocation
This is old enough that all our supported platforms can be assumed
to have this feature. As a plus point, this meson check is going
to start failing with future GCC. It fails to set _GNU_SOURCE, thus
'unshare' is not defined by the header, and its relying on an
implicit function decl. For added fun this whole meson check was
semantically insane because LOOP_CTL_GET_FREE is not a valid arg
to unshare().
Fixes https://fedoraproject.org/wiki/Toolchain/PortingToModernC
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When starting a guest with <interface/> which has the target
device name set (i.e. not generated by us), it may happen that
the TAP device already exists. This then may lead to all sorts of
problems. For instance: for <interface type='network'/> the TAP
device is plugged into the network's bridge, but since the TAP
device is persistent it remains plugged there even after the
guest is shut off. We don't have a code that unplugs TAP devices
from the bridge because TAP devices we create are transient, i.e.
are removed automatically when QEMU closes their FD.
The only exception is <interface type='ethernet'/> with <target
managed='no'/> where we specifically want to let users use
pre-created TAP device and basically not touch it at all.
There's another reason for denying to use a pre-created TAP
devices: if we ever have bug in TAP name generation, we may
re-use a TAP device from another domain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2144738
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
A caller might be interested in the case when @ifname was already
set and it wasn't a template. In such case the
virNetDevGenerateName() does not touch the @ifname at all and
returns 0 to indicate success. Make it return 1 to distinguish
this case from the other case, in which a new name was generated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The script had an incorrect interpreter line until commit
f6a19d7264, so the flake8 check would not realize it needed
to pick it up and these issues, some of which were present it
the very first version that was committed, were not being
reported.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Go through env(1) instead of hardcoding the path to the Python
interpreter, as we already do for all other Python scripts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Scripts from the following list were installed with group write
bit set: virt-xml-validate, virt-pki-validate,
virt-sanlock-cleanup, libvirt-guests.sh. This is very unusual and
in contrast with the way other scripts/binaries are installed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151202
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When running virsh snapshot-* command, such as snapshot-create-as /
snapshot-delete, it prints a result message.
On the other hand virsh snapshot-revert command doesn't print a result
message.
So, This patch fixes to add message when running virsh snapshot-revert
command.
# virsh snapshot-create-as vm1 test1
Domain snapshot test01 created
# virsh snapshot-revert vm1 test1
# virsh snapshot-delete vm1 test1
Domain snapshot test01 deleted
Signed-off-by: Haruka Ohata <ohata.haruka@fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically, QEMU took screenshots in PPM. While this might use
to be popular format, as of v7.1.0-rc0~125^2~6 it is possible to
take screenshots in PNG. This is more popular and renders almost
everywhere, which is not the case for PPM (for instance, modern
browsers do not render it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'screendump' command has new argument 'format'. Let's expose
this on our QMP level so that callers can specify the format, if
they wish so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some reason, only @file argument is printed into debug logs.
The rest of arguments was left out. Include all arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Andrea Bolognani