We specify "true" as the fail-action for LIBVIRT_CHECK_PKG.
This was used when we had a fallback to non-pkg-config detection,
then removed in commit 5bdcef13d1
later re-introduced in commit dc3d2c9f8c
and then left in when removing the old detection again in
commit 18981877d2
Remove it to properly error out when libxl was requested but not
detected.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 18981877d2
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we get rid of GNULIB, we need to check for -lpthread
support.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libpcap-1.5.0 introduced a function to enforce immediate mode (on all
platforms) which the follow-up patches will rely on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cygwin is not a supported build platform for libvirt and
has no testing coverage in our CI systems. Stop pretending
the code is usable and remove it so there is less to port
to Meson.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* send, recv: we use write & read for sockets so don't
need these portability wrappers
* ioctl, fcntl, fcntl-h: any usage of these is conditionally
compiled and excludes Windows
* ttyname_r: this exists in all supported platforms that
we require now
* environ: the tests explicitly declare this global variable
* intprops: the code has been converted / simplified
* nonblocking: we have a custom impl now to work with our
own sockets wrappers
* openpty: custom checks in configure.ac cope with portability
* accept, bind, connect, getpeername, getsockname, listen,
setsockopt, socket: code needing Windows portability uses
our wrapper functions
* close: avoids abort when passed invalid FD on Windows.
Our VIR_FORCE_CLOSE wrapper avoids calling close(-1)
and it is reasonable to abort in other scenarios in
the RPC client
* physmem: the gnulib code has been partially imported
* warnings, manywarnings: copy the files directly into
our local m4 dir
* verify: replaced by G_STATIC_ASSERT
* pthread_sigmask: none of the fixed portability problems
affect libvirt's usage on current supported platforms
* termios: the header is now conditionally included only
when needed
* time_r: replaced with GDateTime APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_networking_init() does the same as our custom code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Pick 256k as the limit.
While -Wno-frame-larger-than would make more sense for usage
in our test suite, the -Wno version seems to have no effect
if -Wframe-larger-than was already specified.
Use an (un)reasonably large value instead.
Fixes the build with clang:
../../tests/cputest.c:964:1: error: stack frame size of 33176 bytes
in function 'mymain' [-Werror,-Wframe-larger-than=]
mymain(void)
^
1 error generated.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.
Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is plenty of distributions that haven't switched to
systemd nor they force their users to (Gentoo, Alpine Linux to
name a few). With the daemon split merged their only option is to
still use the monolithic daemon which will go away eventually.
Provide init scripts for these distros too.
For now, I'm not introducing config files which would correspond
to the init files except for libvirtd and virtproxyd init scripts
where it might be desirable to tweak the command line of
corresponding daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2man tool is provided by python docutils, and as the name
suggests, it converts RST documents into man pages.
The intention is that our current POD docs will be converted to
RST format, allowing one more use of Perl to be eliminated from
libvirt.
The manual pages will now all be kept in the docs/manpages/ directory,
which enables us to include the man pages in the published website.
This is good for people searching for libvirt man pages online as it
makes it more likely google will send them to the libvirt.org instead
of some random third party man page site with outdated content.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our website is written assuming HTML5 standard & doctype:
commit b1c81567c7
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jul 26 18:01:25 2017 +0100
docs: switch to using HTML5 doctype declaration
so we want the RST conversion to also use HTML5. Ubuntu 16.04 still
only has the HTML4 generating tools though, so we have that as a
fallback.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rst2html tool is provided by python docutils, and as the name
suggests, it converts RST documents into HTML.
Basic rules are added for integrating RST docs into the website
build process.
This enables us to start writing docs on our website in RST format
instead of HTML, without changing the rest of our website templating
system away from XSLT yet.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that function is no longer used, it can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two ways for specifying loader:nvram pairs:
1) --with-loader-nvram configure option
2) nvram variable in qemu.conf
Since we have FW descriptors, using this old style is
discouraged, but not as strong as one would expect. Produce more
warnings:
1) produce a warning if somebody tries the configure option
2) produce a warning if somebody sets nvram variable and at
least on FW descriptor was found
The reason for producing warning in case 1) is that package
maintainers, who set the configure option in the first place
should start moving towards FW descriptors and abandon the
configure option. After all, the warning is printed into config
output only in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1763477
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to have the libvirt-admin.so library definition in the
src directory. In addition the library uses directly code from admin
sub-directory so move the remaining bits there as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This version is available on all supported OSes and includes the
transaction APIs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported OSes have libnl-3.0 and netcf uses it so there is no need
to keep libnl-1.0 compatibility code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
= and == are both operators to test for string equality in bash,
but only = is required by POSIX.
Signed-off-by: Maya Rashish <coypu@sdf.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With glib inclusion, some of its functions have
__attribute__((__malloc__)) which make compiler realize we want
to use the same attribute for some trivial functions of ours. For
instance qemuDomainManagedSavePath(). I don't see any real
benefit into using the attribute, so disable that suggestion.
In fact, wrong use of the attribute may lead to mysterious bugs:
https://gitlab.gnome.org/GNOME/glib/issues/1465
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Converting from virObject to GObject is reasonably straightforward,
as illustrated by this patch for virIdentity
In the header file
- Remove
typedef struct _virIdentity virIdentity
- Add
#define VIR_TYPE_IDENTITY virIdentity_get_type ()
G_DECLARE_FINAL_TYPE (virIdentity, vir_identity, VIR, IDENTITY, GObject);
Which provides the typedef we just removed, and class
declaration boilerplate and various other constants/macros.
In the source file
- Change 'virObject parent' to 'GObject parent' in the struct
- Remove the virClass variable and its initializing call
- Add
G_DEFINE_TYPE(virIdentity, vir_identity, G_TYPE_OBJECT)
which declares the instance & class constructor functions
- Add an impl of the instance & class constructors
wiring up the finalize method to point to our dispose impl
In all files
- Replace VIR_AUTOUNREF(virIdentityPtr) with g_autoptr(virIdentity)
- Replace virObjectRef/Unref with g_object_ref/unref. Note
the latter functions do *NOT* accept a NULL object where as
libvirt's do. If you replace g_object_unref with g_clear_object
it is NULL safe, but also clears the pointer.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate porting over to glib, this rewrites the auto cleanup
macros to use glib's equivalent.
As a result it is now possible to use g_autoptr/VIR_AUTOPTR, and
g_auto/VIR_AUTOCLEAN, g_autofree/VIR_AUTOFREE interchangably, regardless
of which macros were used to declare the cleanup types.
Within the scope of any single method, code must remain consistent
using either GLib or Libvirt macros, never mixing both. New code
must preferentially use the GLib macros, and old code will be
converted incrementally.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Prepare for linking with glib by probing for it at configure
time. Per supported platforms target, the min glib versions on
relevant distros are:
RHEL-8: 2.56.1
RHEL-7: 2.50.3
Debian (Buster): 2.58.3
Debian (Stretch): 2.50.3
OpenBSD (Ports): 2.58.3
FreeBSD (Ports): 2.56.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.48 is a reasonable target.
This aligns with the minimum version required by qemu too.
We must disable the bad-function-cast warning as various GLib APIs
and macros will trigger this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Clang's gnu99 mode is not quite the same as GCC's. It will complain
about redefined typedefs being a C11 feature, while GCC does not
complain and allows them in gnu99 mode.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When adding the -std=gnu99 flag, we set $wantwarn instead
of appending to it. This meant all the compiler warnings
were accidentally discarded.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We previously got -std=gnu99 secretly enabled as a side-effect
of requesting the 'stdarg' gnulib module. We rely on some
extensions from c99/gnu99 and while RHEL-7 supports this, it
still defaults to gnu89. RHEL-7 also supports some newer
standards but declares them experimental/incomplete, so sticking
with gnu99 is best bet for now & matches historical usage.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The getopt-posix module fixes a problem with optind being incorrectly
set after a failed option parse. It was also previously used to allow
the bhyve driver to access a private internal reentrant getopt impl.
None of this matters to libvirt code any more.
This partially reverts
commit b436a8ae5c
Author: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Date: Thu Jun 9 00:50:35 2016 +0000
gnulib: add getopt module
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The colors are not based on the semantics of the message but rather
on the message itself. This means that the default human-perceived
semantics (red = bad, green = good) don't really apply and spotting a
color does not mean anythting.
This is amplified by the sheer amount of output which configure produces
and the fact that some of the messages have negative semantics or
additional output.
In case of any problem the user will have to go through everything
anyways as spotting a red or yellow line has 0 information value.
Here are a few examples:
1) some 'no' messages are not a problem:
checking minix/config.h presence... no
2) some 'no' messages are actually positive:
checking for special C compiler options needed for large files... no
3) in some cases a 'yes' would mean that something is broken or needs
workaround
checking whether stat file-mode macros are broken... no
checking whether wint_t is too small... no
checking whether stdint.h predates C++11... no
checking whether the inttypes.h PRIxNN macros are broken... no
checking whether clang gives bogus warnings for -Wdouble-promotion... no
checking whether gettimeofday clobbers localtime buffer... no
4) due to string match based colors extra text makes messages yellow
checking for a traditional french locale... none
checking for working nanosleep... no (mishandles large arguments)
checking for library containing gethostbyname... none required
checking whether mbrtowc handles incomplete characters... (cached) guessing yes
5) in some cases the yes/no is very context dependant
checking whether pthread_rwlock_rdlock prefers a writer to a reader... no
checking whether this build is done by a static analysis tool... no
6) detected paths to binaries and libs are yellow despite being present
checking for objdump... objdump
checking for atomic ops implementation... gcc
As of the reasons above I don't think the colorization of the configure
output helps users or developers to debug the build process and
thus is not worth the extra code or output clutter.
This reverts commit c98174ce08.
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The colorization based on the string itself makes little to no sense as
the semantic meaning of the color (red = bad, green = good) is not
extracted from the semantics of the message:
1) If there is some additional string a 'yes' is marked yellow:
configure: driver_modules: yes (CFLAGS='' LIBS='-ldl')
2) In some cases a 'no' is actually good:
configure: hal: no
3) Few good/recommended configuration options are still yellow:
configure: QEMU: qemu:qemu
while using 'root:root' would still be yellow.
4) fields dumping config (e.g. the warning flags line) is a giant blob
of colored text which makes little sense
configure: Warning Flags: -fno-common -W -Wabsolute-value
-Waddress -Waddress-of-packed-member -Waggressive-loop-optimizations
-Wall -Wattribute-warning -Wattributes -Wbad-function-cast
-Wbool-compare -Wbool-operation -Wbuiltin-declaration-mismatch
-Wbuiltin-macro-redefined -Wcannot-profile -Wcast-align
-Wcast-align=strict -Wcast-function-type -Wchar-subscripts -Wclobbered
-Wcomment -Wcomments -Wcoverage-mismatch -Wcpp -Wdangling-else
-Wdate-time -Wdeprecated-declarations -Wdesignated-init
-Wdiscarded-array-qualifiers -Wdiscarded-qualifiers -Wdiv-by-zero
-Wdouble-promotion -Wduplicated-cond -Wduplicate-decl-speci ...
In addition if the idea is to switch to a more usable build system it
does not make sense to clutter the current one with more code.
This reverts commit 4b3ab5d213.
ACKed-by: Michal Prívozník <mprivozn@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The LIBVIRT_RESULT function takes two or three arguments. The
first one is the name of the result (aka CHECK_NAME). It is
printed before the colon character. The rest of the arguments is
printed after the character. To produce colourized output a
couple of changes needs to be made.
Firstly, we need to print the CHECK_NAME using "echo -n" so that
the new line is not appended at the end of the message. To
achieve this, AS_MESSAGE_N function is introduced. It's a
verbatim copy of AS_MESSAGE (which is just another alias to
AC_MSG_NOTICE) except it doesn't put '\n' at the EOL.
The alias is defined at /usr/share/autoconf-*/autoconf/general.m4
and the AS_MESSAGE is then defined at
/usr/share/autoconf-2.69/m4sugar/m4sh.m4.
Secondly, the rest of the arguments are printed colourized and to
achieve that and also keep printing them into the log file the
_AS_ECHO and COLORIZE_RESULT functions need to be called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If we're running from a TTY we can put some colors around 'yes',
'no' and other messages.
Shamelessly copied from Ruby source code and modified a bit to
comply with syntax-check.
e487959287
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The times, when we had small CRTs are long gone. Now, in the era
of wide screens we can be more generous when it comes to aligning
the output of configure. The longest string before the colon is
'wireshark_dissector' which counts 19 characters. Therefore,
align the strings at 20.
At the same time, drop the useless result alignment. It behaves
oddly - it puts a space at the end of each "no" because of the
%-3s format we use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
One of the advantages is that LIBVIRT_RESULT aligns the resulting
message for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
A slirp helper is a process that provides user-mode networking through
a unix domain socket. It is expected to follow the following
specification:
https://gitlab.freedesktop.org/slirp/libslirp-rs/blob/master/src/bin/README.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't include this information for any other library, and
having it there means there are two places we need to change
every time the required version is bumped.
configure will provide the user with a nice error message,
which includes the required version, if libxml2 found on the
system is too old.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The various distros have the following libxml2 vesions:
CentOS 7: 2.9.1
Debian Stretch: 2.9.4
FreeBSD Ports: 2.9.9
Ubuntu 16.04 LTS: 2.9.3
Based on this sampling, we can reasonably bump libxml2 min
version to 2.9.1
The 'query_raw' struct field was added in version 2.6.28,
so can be assumed to exist.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically URIs handled by the remote driver will always connect to
the libvirtd UNIX socket. There will now be one daemon per driver, and
each of these has its own UNIX sockets to connect to.
It will still be possible to run the traditional monolithic libvirtd
though, which will have the original UNIX socket path.
In addition there is a virproxyd daemon that doesn't run any drivers,
but provides proxying for clients accessing libvirt over IP sockets, or
tunnelling to the legacy libvirtd UNIX socket path.
Finally when running inside a daemon, the remote driver must not reject
connections unconditionally. For example, the QEMU driver needs to be
able to connect to the network driver. The remote driver must thus be
willing to handle connections even when inside the daemon, provided no
local driver is registered.
This refactoring enables the remote driver to be able to connect to the
per-driver daemons. The URI parameter "mode" accepts the values "auto",
"direct" and "legacy" to control which daemons are connected to.
The client side libvirt.conf config file also supports a "remote_mode"
setting which is used if the URI parameter is not set.
If neither the config file or URI parameter set a mode, then "auto"
is used, whereby the client looks to see which sockets actually exist
right now.
The remote driver will only ever spawn the per-driver daemons, or
the legacy libvirtd. It won't ever try to spawn virtproxyd, as
that is only there for IP based connectivity, or for access from
legacy remote clients.
If connecting to a remote host over any kind of ssh tunnel, for now we
must assume only the legacy socket exists. A future patch will introduce
a netcat replacement that is tailored for libvirt to make remote
tunnelling easier.
The configure arg '--with-remote-default-mode=legacy|direct' allows
packagers to set a default at build time. If not given, it will default
to legacy mode.
Eventually the default will switch to direct mode. Distros can choose
to do the switch earlier if desired. The main blocker is testing and
suitable SELinux/AppArmor policies.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The previous bump to 4.4 was done in:
commit 24241c236e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 5 10:35:32 2017 +0100
Require use of GCC 4.4 or CLang compilers
with 4.4 picked due to RHEL-6. Since we dropped RHEL-6, the
next oldest distro is RHEL-7 (4.8.5), and thus we pick 4.8
as the new min.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 44b8df4cb4 introduced a check for yajl.pc that is
extremely similar to the one we already had in place for
readline.pc - so similar, in fact, that it's still looking
for readline.pc instead of yajl.pc :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In libssh 0.9.0 functions ssh_is_server_known and ssh_write_knownhost
are marked as deprecated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1722735
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We provide default values for both MODPROBE and RMMOD and thus
there is no way that their paths can be empty strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1710575
It may happen that the system where libvirt is built at doesn't
have udevadm binary but the one where it runs does have it.
If we change how udevadm is run in virWaitForDevices() then we
can safely pass a default value in m4 macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The udevsettle binary is no longer used anywhere as it was
replaced by 'udevadm settle'. There's no reason for us to even
check for it in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ján Tomko