License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2010-08-10 08:20:08 +08:00
|
|
|
/*
|
|
|
|
* Hardware performance events for the Alpha.
|
|
|
|
*
|
|
|
|
* We implement HW counts on the EV67 and subsequent CPUs only.
|
|
|
|
*
|
|
|
|
* (C) 2010 Michael J. Cree
|
|
|
|
*
|
|
|
|
* Somewhat based on the Sparc code, and to a lesser extent the PowerPC and
|
|
|
|
* ARM code, which are copyright by their respective authors.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/perf_event.h>
|
|
|
|
#include <linux/kprobes.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/kdebug.h>
|
|
|
|
#include <linux/mutex.h>
|
2010-11-26 01:38:29 +08:00
|
|
|
#include <linux/init.h>
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
#include <asm/hwrpb.h>
|
2011-07-27 07:09:06 +08:00
|
|
|
#include <linux/atomic.h>
|
2010-08-10 08:20:08 +08:00
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/irq_regs.h>
|
|
|
|
#include <asm/pal.h>
|
|
|
|
#include <asm/wrperfmon.h>
|
|
|
|
#include <asm/hw_irq.h>
|
|
|
|
|
|
|
|
|
|
|
|
/* The maximum number of PMCs on any Alpha CPU whatsoever. */
|
|
|
|
#define MAX_HWEVENTS 3
|
|
|
|
#define PMC_NO_INDEX -1
|
|
|
|
|
|
|
|
/* For tracking PMCs and the hw events they monitor on each CPU. */
|
|
|
|
struct cpu_hw_events {
|
|
|
|
int enabled;
|
|
|
|
/* Number of events scheduled; also number entries valid in arrays below. */
|
|
|
|
int n_events;
|
|
|
|
/* Number events added since last hw_perf_disable(). */
|
|
|
|
int n_added;
|
|
|
|
/* Events currently scheduled. */
|
|
|
|
struct perf_event *event[MAX_HWEVENTS];
|
|
|
|
/* Event type of each scheduled event. */
|
|
|
|
unsigned long evtype[MAX_HWEVENTS];
|
|
|
|
/* Current index of each scheduled event; if not yet determined
|
|
|
|
* contains PMC_NO_INDEX.
|
|
|
|
*/
|
|
|
|
int current_idx[MAX_HWEVENTS];
|
|
|
|
/* The active PMCs' config for easy use with wrperfmon(). */
|
|
|
|
unsigned long config;
|
|
|
|
/* The active counters' indices for easy use with wrperfmon(). */
|
|
|
|
unsigned long idx_mask;
|
|
|
|
};
|
|
|
|
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A structure to hold the description of the PMCs available on a particular
|
|
|
|
* type of Alpha CPU.
|
|
|
|
*/
|
|
|
|
struct alpha_pmu_t {
|
|
|
|
/* Mapping of the perf system hw event types to indigenous event types */
|
|
|
|
const int *event_map;
|
|
|
|
/* The number of entries in the event_map */
|
|
|
|
int max_events;
|
|
|
|
/* The number of PMCs on this Alpha */
|
|
|
|
int num_pmcs;
|
|
|
|
/*
|
|
|
|
* All PMC counters reside in the IBOX register PCTR. This is the
|
|
|
|
* LSB of the counter.
|
|
|
|
*/
|
|
|
|
int pmc_count_shift[MAX_HWEVENTS];
|
|
|
|
/*
|
|
|
|
* The mask that isolates the PMC bits when the LSB of the counter
|
|
|
|
* is shifted to bit 0.
|
|
|
|
*/
|
|
|
|
unsigned long pmc_count_mask[MAX_HWEVENTS];
|
|
|
|
/* The maximum period the PMC can count. */
|
|
|
|
unsigned long pmc_max_period[MAX_HWEVENTS];
|
|
|
|
/*
|
|
|
|
* The maximum value that may be written to the counter due to
|
|
|
|
* hardware restrictions is pmc_max_period - pmc_left.
|
|
|
|
*/
|
|
|
|
long pmc_left[3];
|
|
|
|
/* Subroutine for allocation of PMCs. Enforces constraints. */
|
|
|
|
int (*check_constraints)(struct perf_event **, unsigned long *, int);
|
2013-09-10 17:58:12 +08:00
|
|
|
/* Subroutine for checking validity of a raw event for this PMU. */
|
|
|
|
int (*raw_event_valid)(u64 config);
|
2010-08-10 08:20:08 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The Alpha CPU PMU description currently in operation. This is set during
|
|
|
|
* the boot process to the specific CPU of the machine.
|
|
|
|
*/
|
|
|
|
static const struct alpha_pmu_t *alpha_pmu;
|
|
|
|
|
|
|
|
|
|
|
|
#define HW_OP_UNSUPPORTED -1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The hardware description of the EV67, EV68, EV69, EV7 and EV79 PMUs
|
|
|
|
* follow. Since they are identical we refer to them collectively as the
|
|
|
|
* EV67 henceforth.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* EV67 PMC event types
|
|
|
|
*
|
|
|
|
* There is no one-to-one mapping of the possible hw event types to the
|
|
|
|
* actual codes that are used to program the PMCs hence we introduce our
|
|
|
|
* own hw event type identifiers.
|
|
|
|
*/
|
|
|
|
enum ev67_pmc_event_type {
|
|
|
|
EV67_CYCLES = 1,
|
|
|
|
EV67_INSTRUCTIONS,
|
|
|
|
EV67_BCACHEMISS,
|
|
|
|
EV67_MBOXREPLAY,
|
|
|
|
EV67_LAST_ET
|
|
|
|
};
|
|
|
|
#define EV67_NUM_EVENT_TYPES (EV67_LAST_ET-EV67_CYCLES)
|
|
|
|
|
|
|
|
|
|
|
|
/* Mapping of the hw event types to the perf tool interface */
|
|
|
|
static const int ev67_perfmon_event_map[] = {
|
|
|
|
[PERF_COUNT_HW_CPU_CYCLES] = EV67_CYCLES,
|
|
|
|
[PERF_COUNT_HW_INSTRUCTIONS] = EV67_INSTRUCTIONS,
|
|
|
|
[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
|
|
|
|
[PERF_COUNT_HW_CACHE_MISSES] = EV67_BCACHEMISS,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ev67_mapping_t {
|
|
|
|
int config;
|
|
|
|
int idx;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The mapping used for one event only - these must be in same order as enum
|
|
|
|
* ev67_pmc_event_type definition.
|
|
|
|
*/
|
|
|
|
static const struct ev67_mapping_t ev67_mapping[] = {
|
|
|
|
{EV67_PCTR_INSTR_CYCLES, 1}, /* EV67_CYCLES, */
|
|
|
|
{EV67_PCTR_INSTR_CYCLES, 0}, /* EV67_INSTRUCTIONS */
|
|
|
|
{EV67_PCTR_INSTR_BCACHEMISS, 1}, /* EV67_BCACHEMISS */
|
|
|
|
{EV67_PCTR_CYCLES_MBOX, 1} /* EV67_MBOXREPLAY */
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check that a group of events can be simultaneously scheduled on to the
|
|
|
|
* EV67 PMU. Also allocate counter indices and config.
|
|
|
|
*/
|
|
|
|
static int ev67_check_constraints(struct perf_event **event,
|
|
|
|
unsigned long *evtype, int n_ev)
|
|
|
|
{
|
|
|
|
int idx0;
|
|
|
|
unsigned long config;
|
|
|
|
|
|
|
|
idx0 = ev67_mapping[evtype[0]-1].idx;
|
|
|
|
config = ev67_mapping[evtype[0]-1].config;
|
|
|
|
if (n_ev == 1)
|
|
|
|
goto success;
|
|
|
|
|
|
|
|
BUG_ON(n_ev != 2);
|
|
|
|
|
|
|
|
if (evtype[0] == EV67_MBOXREPLAY || evtype[1] == EV67_MBOXREPLAY) {
|
|
|
|
/* MBOX replay traps must be on PMC 1 */
|
|
|
|
idx0 = (evtype[0] == EV67_MBOXREPLAY) ? 1 : 0;
|
|
|
|
/* Only cycles can accompany MBOX replay traps */
|
|
|
|
if (evtype[idx0] == EV67_CYCLES) {
|
|
|
|
config = EV67_PCTR_CYCLES_MBOX;
|
|
|
|
goto success;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (evtype[0] == EV67_BCACHEMISS || evtype[1] == EV67_BCACHEMISS) {
|
|
|
|
/* Bcache misses must be on PMC 1 */
|
|
|
|
idx0 = (evtype[0] == EV67_BCACHEMISS) ? 1 : 0;
|
|
|
|
/* Only instructions can accompany Bcache misses */
|
|
|
|
if (evtype[idx0] == EV67_INSTRUCTIONS) {
|
|
|
|
config = EV67_PCTR_INSTR_BCACHEMISS;
|
|
|
|
goto success;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (evtype[0] == EV67_INSTRUCTIONS || evtype[1] == EV67_INSTRUCTIONS) {
|
|
|
|
/* Instructions must be on PMC 0 */
|
|
|
|
idx0 = (evtype[0] == EV67_INSTRUCTIONS) ? 0 : 1;
|
|
|
|
/* By this point only cycles can accompany instructions */
|
|
|
|
if (evtype[idx0^1] == EV67_CYCLES) {
|
|
|
|
config = EV67_PCTR_INSTR_CYCLES;
|
|
|
|
goto success;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Otherwise, darn it, there is a conflict. */
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
success:
|
|
|
|
event[0]->hw.idx = idx0;
|
|
|
|
event[0]->hw.config_base = config;
|
|
|
|
if (n_ev == 2) {
|
|
|
|
event[1]->hw.idx = idx0 ^ 1;
|
|
|
|
event[1]->hw.config_base = config;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2013-09-10 17:58:12 +08:00
|
|
|
static int ev67_raw_event_valid(u64 config)
|
|
|
|
{
|
|
|
|
return config >= EV67_CYCLES && config < EV67_LAST_ET;
|
|
|
|
};
|
|
|
|
|
|
|
|
|
2010-08-10 08:20:08 +08:00
|
|
|
static const struct alpha_pmu_t ev67_pmu = {
|
|
|
|
.event_map = ev67_perfmon_event_map,
|
|
|
|
.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
|
|
|
|
.num_pmcs = 2,
|
|
|
|
.pmc_count_shift = {EV67_PCTR_0_COUNT_SHIFT, EV67_PCTR_1_COUNT_SHIFT, 0},
|
|
|
|
.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK, EV67_PCTR_1_COUNT_MASK, 0},
|
|
|
|
.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
|
|
|
|
.pmc_left = {16, 4, 0},
|
2013-09-10 17:58:12 +08:00
|
|
|
.check_constraints = ev67_check_constraints,
|
|
|
|
.raw_event_valid = ev67_raw_event_valid,
|
2010-08-10 08:20:08 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Helper routines to ensure that we read/write only the correct PMC bits
|
|
|
|
* when calling the wrperfmon PALcall.
|
|
|
|
*/
|
|
|
|
static inline void alpha_write_pmc(int idx, unsigned long val)
|
|
|
|
{
|
|
|
|
val &= alpha_pmu->pmc_count_mask[idx];
|
|
|
|
val <<= alpha_pmu->pmc_count_shift[idx];
|
|
|
|
val |= (1<<idx);
|
|
|
|
wrperfmon(PERFMON_CMD_WRITE, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned long alpha_read_pmc(int idx)
|
|
|
|
{
|
|
|
|
unsigned long val;
|
|
|
|
|
|
|
|
val = wrperfmon(PERFMON_CMD_READ, 0);
|
|
|
|
val >>= alpha_pmu->pmc_count_shift[idx];
|
|
|
|
val &= alpha_pmu->pmc_count_mask[idx];
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set a new period to sample over */
|
|
|
|
static int alpha_perf_event_set_period(struct perf_event *event,
|
|
|
|
struct hw_perf_event *hwc, int idx)
|
|
|
|
{
|
2010-09-01 10:46:04 +08:00
|
|
|
long left = local64_read(&hwc->period_left);
|
2010-08-10 08:20:08 +08:00
|
|
|
long period = hwc->sample_period;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (unlikely(left <= -period)) {
|
|
|
|
left = period;
|
2010-09-01 10:46:04 +08:00
|
|
|
local64_set(&hwc->period_left, left);
|
2010-08-10 08:20:08 +08:00
|
|
|
hwc->last_period = period;
|
|
|
|
ret = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (unlikely(left <= 0)) {
|
|
|
|
left += period;
|
2010-09-01 10:46:04 +08:00
|
|
|
local64_set(&hwc->period_left, left);
|
2010-08-10 08:20:08 +08:00
|
|
|
hwc->last_period = period;
|
|
|
|
ret = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Hardware restrictions require that the counters must not be
|
|
|
|
* written with values that are too close to the maximum period.
|
|
|
|
*/
|
|
|
|
if (unlikely(left < alpha_pmu->pmc_left[idx]))
|
|
|
|
left = alpha_pmu->pmc_left[idx];
|
|
|
|
|
|
|
|
if (left > (long)alpha_pmu->pmc_max_period[idx])
|
|
|
|
left = alpha_pmu->pmc_max_period[idx];
|
|
|
|
|
2010-09-01 10:46:04 +08:00
|
|
|
local64_set(&hwc->prev_count, (unsigned long)(-left));
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
alpha_write_pmc(idx, (unsigned long)(-left));
|
|
|
|
|
|
|
|
perf_event_update_userpage(event);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Calculates the count (the 'delta') since the last time the PMC was read.
|
|
|
|
*
|
|
|
|
* As the PMCs' full period can easily be exceeded within the perf system
|
|
|
|
* sampling period we cannot use any high order bits as a guard bit in the
|
|
|
|
* PMCs to detect overflow as is done by other architectures. The code here
|
|
|
|
* calculates the delta on the basis that there is no overflow when ovf is
|
|
|
|
* zero. The value passed via ovf by the interrupt handler corrects for
|
|
|
|
* overflow.
|
|
|
|
*
|
|
|
|
* This can be racey on rare occasions -- a call to this routine can occur
|
|
|
|
* with an overflowed counter just before the PMI service routine is called.
|
|
|
|
* The check for delta negative hopefully always rectifies this situation.
|
|
|
|
*/
|
|
|
|
static unsigned long alpha_perf_event_update(struct perf_event *event,
|
|
|
|
struct hw_perf_event *hwc, int idx, long ovf)
|
|
|
|
{
|
|
|
|
long prev_raw_count, new_raw_count;
|
|
|
|
long delta;
|
|
|
|
|
|
|
|
again:
|
2010-09-01 10:46:04 +08:00
|
|
|
prev_raw_count = local64_read(&hwc->prev_count);
|
2010-08-10 08:20:08 +08:00
|
|
|
new_raw_count = alpha_read_pmc(idx);
|
|
|
|
|
2010-09-01 10:46:04 +08:00
|
|
|
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
|
2010-08-10 08:20:08 +08:00
|
|
|
new_raw_count) != prev_raw_count)
|
|
|
|
goto again;
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
delta = (new_raw_count - (prev_raw_count & alpha_pmu->pmc_count_mask[idx])) + ovf;
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/* It is possible on very rare occasions that the PMC has overflowed
|
|
|
|
* but the interrupt is yet to come. Detect and fix this situation.
|
|
|
|
*/
|
|
|
|
if (unlikely(delta < 0)) {
|
|
|
|
delta += alpha_pmu->pmc_max_period[idx] + 1;
|
|
|
|
}
|
|
|
|
|
2010-09-01 10:46:04 +08:00
|
|
|
local64_add(delta, &event->count);
|
|
|
|
local64_sub(delta, &hwc->period_left);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
return new_raw_count;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Collect all HW events into the array event[].
|
|
|
|
*/
|
|
|
|
static int collect_events(struct perf_event *group, int max_count,
|
|
|
|
struct perf_event *event[], unsigned long *evtype,
|
|
|
|
int *current_idx)
|
|
|
|
{
|
|
|
|
struct perf_event *pe;
|
|
|
|
int n = 0;
|
|
|
|
|
|
|
|
if (!is_software_event(group)) {
|
|
|
|
if (n >= max_count)
|
|
|
|
return -1;
|
|
|
|
event[n] = group;
|
|
|
|
evtype[n] = group->hw.event_base;
|
|
|
|
current_idx[n++] = PMC_NO_INDEX;
|
|
|
|
}
|
2018-03-16 00:36:56 +08:00
|
|
|
for_each_sibling_event(pe, group) {
|
2010-08-10 08:20:08 +08:00
|
|
|
if (!is_software_event(pe) && pe->state != PERF_EVENT_STATE_OFF) {
|
|
|
|
if (n >= max_count)
|
|
|
|
return -1;
|
|
|
|
event[n] = pe;
|
|
|
|
evtype[n] = pe->hw.event_base;
|
|
|
|
current_idx[n++] = PMC_NO_INDEX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return n;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check that a group of events can be simultaneously scheduled on to the PMU.
|
|
|
|
*/
|
|
|
|
static int alpha_check_constraints(struct perf_event **events,
|
|
|
|
unsigned long *evtypes, int n_ev)
|
|
|
|
{
|
|
|
|
|
|
|
|
/* No HW events is possible from hw_perf_group_sched_in(). */
|
|
|
|
if (n_ev == 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (n_ev > alpha_pmu->num_pmcs)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
return alpha_pmu->check_constraints(events, evtypes, n_ev);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If new events have been scheduled then update cpuc with the new
|
|
|
|
* configuration. This may involve shifting cycle counts from one PMC to
|
|
|
|
* another.
|
|
|
|
*/
|
|
|
|
static void maybe_change_configuration(struct cpu_hw_events *cpuc)
|
|
|
|
{
|
|
|
|
int j;
|
|
|
|
|
|
|
|
if (cpuc->n_added == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Find counters that are moving to another PMC and update */
|
|
|
|
for (j = 0; j < cpuc->n_events; j++) {
|
|
|
|
struct perf_event *pe = cpuc->event[j];
|
|
|
|
|
|
|
|
if (cpuc->current_idx[j] != PMC_NO_INDEX &&
|
|
|
|
cpuc->current_idx[j] != pe->hw.idx) {
|
|
|
|
alpha_perf_event_update(pe, &pe->hw, cpuc->current_idx[j], 0);
|
|
|
|
cpuc->current_idx[j] = PMC_NO_INDEX;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Assign to counters all unassigned events. */
|
|
|
|
cpuc->idx_mask = 0;
|
|
|
|
for (j = 0; j < cpuc->n_events; j++) {
|
|
|
|
struct perf_event *pe = cpuc->event[j];
|
|
|
|
struct hw_perf_event *hwc = &pe->hw;
|
|
|
|
int idx = hwc->idx;
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
if (cpuc->current_idx[j] == PMC_NO_INDEX) {
|
|
|
|
alpha_perf_event_set_period(pe, hwc, idx);
|
|
|
|
cpuc->current_idx[j] = idx;
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
if (!(hwc->state & PERF_HES_STOPPED))
|
|
|
|
cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
cpuc->config = cpuc->event[0]->hw.config_base;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Schedule perf HW event on to PMU.
|
|
|
|
* - this function is called from outside this module via the pmu struct
|
|
|
|
* returned from perf event initialisation.
|
|
|
|
*/
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
static int alpha_pmu_add(struct perf_event *event, int flags)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-09-12 13:37:24 +08:00
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
2010-08-10 08:20:08 +08:00
|
|
|
int n0;
|
|
|
|
int ret;
|
2010-09-12 13:37:24 +08:00
|
|
|
unsigned long irq_flags;
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The Sparc code has the IRQ disable first followed by the perf
|
|
|
|
* disable, however this can lead to an overflowed counter with the
|
|
|
|
* PMI disabled on rare occasions. The alpha_perf_event_update()
|
|
|
|
* routine should detect this situation by noting a negative delta,
|
|
|
|
* nevertheless we disable the PMCs first to enable a potential
|
|
|
|
* final PMI to occur before we disable interrupts.
|
|
|
|
*/
|
2010-06-14 14:49:00 +08:00
|
|
|
perf_pmu_disable(event->pmu);
|
2010-09-12 13:37:24 +08:00
|
|
|
local_irq_save(irq_flags);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/* Default to error to be returned */
|
|
|
|
ret = -EAGAIN;
|
|
|
|
|
|
|
|
/* Insert event on to PMU and if successful modify ret to valid return */
|
|
|
|
n0 = cpuc->n_events;
|
|
|
|
if (n0 < alpha_pmu->num_pmcs) {
|
|
|
|
cpuc->event[n0] = event;
|
|
|
|
cpuc->evtype[n0] = event->hw.event_base;
|
|
|
|
cpuc->current_idx[n0] = PMC_NO_INDEX;
|
|
|
|
|
|
|
|
if (!alpha_check_constraints(cpuc->event, cpuc->evtype, n0+1)) {
|
|
|
|
cpuc->n_events++;
|
|
|
|
cpuc->n_added++;
|
|
|
|
ret = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
hwc->state = PERF_HES_UPTODATE;
|
|
|
|
if (!(flags & PERF_EF_START))
|
|
|
|
hwc->state |= PERF_HES_STOPPED;
|
|
|
|
|
2010-09-12 13:37:24 +08:00
|
|
|
local_irq_restore(irq_flags);
|
2010-06-14 14:49:00 +08:00
|
|
|
perf_pmu_enable(event->pmu);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Disable performance monitoring unit
|
|
|
|
* - this function is called from outside this module via the pmu struct
|
|
|
|
* returned from perf event initialisation.
|
|
|
|
*/
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
static void alpha_pmu_del(struct perf_event *event, int flags)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-08-10 08:20:08 +08:00
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
2010-09-12 13:37:24 +08:00
|
|
|
unsigned long irq_flags;
|
2010-08-10 08:20:08 +08:00
|
|
|
int j;
|
|
|
|
|
2010-06-14 14:49:00 +08:00
|
|
|
perf_pmu_disable(event->pmu);
|
2010-09-12 13:37:24 +08:00
|
|
|
local_irq_save(irq_flags);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
for (j = 0; j < cpuc->n_events; j++) {
|
|
|
|
if (event == cpuc->event[j]) {
|
|
|
|
int idx = cpuc->current_idx[j];
|
|
|
|
|
|
|
|
/* Shift remaining entries down into the existing
|
|
|
|
* slot.
|
|
|
|
*/
|
|
|
|
while (++j < cpuc->n_events) {
|
|
|
|
cpuc->event[j - 1] = cpuc->event[j];
|
|
|
|
cpuc->evtype[j - 1] = cpuc->evtype[j];
|
|
|
|
cpuc->current_idx[j - 1] =
|
|
|
|
cpuc->current_idx[j];
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Absorb the final count and turn off the event. */
|
|
|
|
alpha_perf_event_update(event, hwc, idx, 0);
|
|
|
|
perf_event_update_userpage(event);
|
|
|
|
|
|
|
|
cpuc->idx_mask &= ~(1UL<<idx);
|
|
|
|
cpuc->n_events--;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-09-12 13:37:24 +08:00
|
|
|
local_irq_restore(irq_flags);
|
2010-06-14 14:49:00 +08:00
|
|
|
perf_pmu_enable(event->pmu);
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void alpha_pmu_read(struct perf_event *event)
|
|
|
|
{
|
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
|
|
|
|
|
|
alpha_perf_event_update(event, hwc, hwc->idx, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
static void alpha_pmu_stop(struct perf_event *event, int flags)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
if (!(hwc->state & PERF_HES_STOPPED)) {
|
2010-09-12 13:37:24 +08:00
|
|
|
cpuc->idx_mask &= ~(1UL<<hwc->idx);
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
hwc->state |= PERF_HES_STOPPED;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
|
|
|
|
alpha_perf_event_update(event, hwc, hwc->idx, 0);
|
|
|
|
hwc->state |= PERF_HES_UPTODATE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (cpuc->enabled)
|
2010-09-12 13:37:24 +08:00
|
|
|
wrperfmon(PERFMON_CMD_DISABLE, (1UL<<hwc->idx));
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void alpha_pmu_start(struct perf_event *event, int flags)
|
|
|
|
{
|
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
|
|
|
|
if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (flags & PERF_EF_RELOAD) {
|
|
|
|
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
|
|
|
|
alpha_perf_event_set_period(event, hwc, hwc->idx);
|
|
|
|
}
|
|
|
|
|
|
|
|
hwc->state = 0;
|
|
|
|
|
2010-08-10 08:20:08 +08:00
|
|
|
cpuc->idx_mask |= 1UL<<hwc->idx;
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
if (cpuc->enabled)
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, (1UL<<hwc->idx));
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check that CPU performance counters are supported.
|
|
|
|
* - currently support EV67 and later CPUs.
|
|
|
|
* - actually some later revisions of the EV6 have the same PMC model as the
|
|
|
|
* EV67 but we don't do suffiently deep CPU detection to detect them.
|
|
|
|
* Bad luck to the very few people who might have one, I guess.
|
|
|
|
*/
|
|
|
|
static int supported_cpu(void)
|
|
|
|
{
|
|
|
|
struct percpu_struct *cpu;
|
|
|
|
unsigned long cputype;
|
|
|
|
|
|
|
|
/* Get cpu type from HW */
|
|
|
|
cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
|
|
|
|
cputype = cpu->type & 0xffffffff;
|
|
|
|
/* Include all of EV67, EV68, EV7, EV79 and EV69 as supported. */
|
|
|
|
return (cputype >= EV67_CPU) && (cputype <= EV69_CPU);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void hw_perf_event_destroy(struct perf_event *event)
|
|
|
|
{
|
|
|
|
/* Nothing to be done! */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static int __hw_perf_event_init(struct perf_event *event)
|
|
|
|
{
|
|
|
|
struct perf_event_attr *attr = &event->attr;
|
|
|
|
struct hw_perf_event *hwc = &event->hw;
|
|
|
|
struct perf_event *evts[MAX_HWEVENTS];
|
|
|
|
unsigned long evtypes[MAX_HWEVENTS];
|
|
|
|
int idx_rubbish_bin[MAX_HWEVENTS];
|
|
|
|
int ev;
|
|
|
|
int n;
|
|
|
|
|
|
|
|
/* We only support a limited range of HARDWARE event types with one
|
|
|
|
* only programmable via a RAW event type.
|
|
|
|
*/
|
|
|
|
if (attr->type == PERF_TYPE_HARDWARE) {
|
|
|
|
if (attr->config >= alpha_pmu->max_events)
|
|
|
|
return -EINVAL;
|
|
|
|
ev = alpha_pmu->event_map[attr->config];
|
|
|
|
} else if (attr->type == PERF_TYPE_HW_CACHE) {
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
} else if (attr->type == PERF_TYPE_RAW) {
|
2013-09-10 17:58:12 +08:00
|
|
|
if (!alpha_pmu->raw_event_valid(attr->config))
|
|
|
|
return -EINVAL;
|
|
|
|
ev = attr->config;
|
2010-08-10 08:20:08 +08:00
|
|
|
} else {
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ev < 0) {
|
|
|
|
return ev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The EV67 does not support mode exclusion */
|
|
|
|
if (attr->exclude_kernel || attr->exclude_user
|
|
|
|
|| attr->exclude_hv || attr->exclude_idle) {
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We place the event type in event_base here and leave calculation
|
|
|
|
* of the codes to programme the PMU for alpha_pmu_enable() because
|
|
|
|
* it is only then we will know what HW events are actually
|
|
|
|
* scheduled on to the PMU. At that point the code to programme the
|
|
|
|
* PMU is put into config_base and the PMC to use is placed into
|
|
|
|
* idx. We initialise idx (below) to PMC_NO_INDEX to indicate that
|
|
|
|
* it is yet to be determined.
|
|
|
|
*/
|
|
|
|
hwc->event_base = ev;
|
|
|
|
|
|
|
|
/* Collect events in a group together suitable for calling
|
|
|
|
* alpha_check_constraints() to verify that the group as a whole can
|
|
|
|
* be scheduled on to the PMU.
|
|
|
|
*/
|
|
|
|
n = 0;
|
|
|
|
if (event->group_leader != event) {
|
|
|
|
n = collect_events(event->group_leader,
|
|
|
|
alpha_pmu->num_pmcs - 1,
|
|
|
|
evts, evtypes, idx_rubbish_bin);
|
|
|
|
if (n < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
evtypes[n] = hwc->event_base;
|
|
|
|
evts[n] = event;
|
|
|
|
|
|
|
|
if (alpha_check_constraints(evts, evtypes, n + 1))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Indicate that PMU config and idx are yet to be determined. */
|
|
|
|
hwc->config_base = 0;
|
|
|
|
hwc->idx = PMC_NO_INDEX;
|
|
|
|
|
|
|
|
event->destroy = hw_perf_event_destroy;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Most architectures reserve the PMU for their use at this point.
|
|
|
|
* As there is no existing mechanism to arbitrate usage and there
|
|
|
|
* appears to be no other user of the Alpha PMU we just assume
|
|
|
|
* that we can just use it, hence a NO-OP here.
|
|
|
|
*
|
|
|
|
* Maybe an alpha_reserve_pmu() routine should be implemented but is
|
|
|
|
* anything else ever going to use it?
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (!hwc->sample_period) {
|
|
|
|
hwc->sample_period = alpha_pmu->pmc_max_period[0];
|
|
|
|
hwc->last_period = hwc->sample_period;
|
2010-09-01 10:46:04 +08:00
|
|
|
local64_set(&hwc->period_left, hwc->sample_period);
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Main entry point to initialise a HW performance event.
|
|
|
|
*/
|
2010-06-11 19:35:08 +08:00
|
|
|
static int alpha_pmu_event_init(struct perf_event *event)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
2012-02-10 06:20:59 +08:00
|
|
|
/* does not support taken branch sampling */
|
|
|
|
if (has_branch_stack(event))
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
2010-06-11 19:35:08 +08:00
|
|
|
switch (event->attr.type) {
|
|
|
|
case PERF_TYPE_RAW:
|
|
|
|
case PERF_TYPE_HARDWARE:
|
|
|
|
case PERF_TYPE_HW_CACHE:
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2010-08-10 08:20:08 +08:00
|
|
|
if (!alpha_pmu)
|
2010-06-11 19:35:08 +08:00
|
|
|
return -ENODEV;
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/* Do the real initialisation work. */
|
|
|
|
err = __hw_perf_event_init(event);
|
|
|
|
|
2010-06-11 19:35:08 +08:00
|
|
|
return err;
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Main entry point - enable HW performance counters.
|
|
|
|
*/
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
static void alpha_pmu_enable(struct pmu *pmu)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
if (cpuc->enabled)
|
|
|
|
return;
|
|
|
|
|
|
|
|
cpuc->enabled = 1;
|
|
|
|
barrier();
|
|
|
|
|
|
|
|
if (cpuc->n_events > 0) {
|
|
|
|
/* Update cpuc with information from any new scheduled events. */
|
|
|
|
maybe_change_configuration(cpuc);
|
|
|
|
|
|
|
|
/* Start counting the desired events. */
|
|
|
|
wrperfmon(PERFMON_CMD_LOGGING_OPTIONS, EV67_PCTR_MODE_AGGREGATE);
|
|
|
|
wrperfmon(PERFMON_CMD_DESIRED_EVENTS, cpuc->config);
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Main entry point - disable HW performance counters.
|
|
|
|
*/
|
|
|
|
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
static void alpha_pmu_disable(struct pmu *pmu)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
if (!cpuc->enabled)
|
|
|
|
return;
|
|
|
|
|
|
|
|
cpuc->enabled = 0;
|
|
|
|
cpuc->n_added = 0;
|
|
|
|
|
|
|
|
wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
|
|
|
|
}
|
|
|
|
|
2010-06-14 14:49:00 +08:00
|
|
|
static struct pmu pmu = {
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
.pmu_enable = alpha_pmu_enable,
|
|
|
|
.pmu_disable = alpha_pmu_disable,
|
2010-06-14 14:49:00 +08:00
|
|
|
.event_init = alpha_pmu_event_init,
|
perf: Rework the PMU methods
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-16 20:37:10 +08:00
|
|
|
.add = alpha_pmu_add,
|
|
|
|
.del = alpha_pmu_del,
|
|
|
|
.start = alpha_pmu_start,
|
|
|
|
.stop = alpha_pmu_stop,
|
2010-06-14 14:49:00 +08:00
|
|
|
.read = alpha_pmu_read,
|
|
|
|
};
|
|
|
|
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Main entry point - don't know when this is called but it
|
|
|
|
* obviously dumps debug info.
|
|
|
|
*/
|
|
|
|
void perf_event_print_debug(void)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
unsigned long pcr;
|
|
|
|
int pcr0, pcr1;
|
|
|
|
int cpu;
|
|
|
|
|
|
|
|
if (!supported_cpu())
|
|
|
|
return;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
|
|
|
cpu = smp_processor_id();
|
|
|
|
|
|
|
|
pcr = wrperfmon(PERFMON_CMD_READ, 0);
|
|
|
|
pcr0 = (pcr >> alpha_pmu->pmc_count_shift[0]) & alpha_pmu->pmc_count_mask[0];
|
|
|
|
pcr1 = (pcr >> alpha_pmu->pmc_count_shift[1]) & alpha_pmu->pmc_count_mask[1];
|
|
|
|
|
|
|
|
pr_info("CPU#%d: PCTR0[%06x] PCTR1[%06x]\n", cpu, pcr0, pcr1);
|
|
|
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Performance Monitoring Interrupt Service Routine called when a PMC
|
|
|
|
* overflows. The PMC that overflowed is passed in la_ptr.
|
|
|
|
*/
|
|
|
|
static void alpha_perf_event_irq_handler(unsigned long la_ptr,
|
|
|
|
struct pt_regs *regs)
|
|
|
|
{
|
|
|
|
struct cpu_hw_events *cpuc;
|
|
|
|
struct perf_sample_data data;
|
|
|
|
struct perf_event *event;
|
|
|
|
struct hw_perf_event *hwc;
|
|
|
|
int idx, j;
|
|
|
|
|
alpha: Replace __get_cpu_var
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-18 01:30:48 +08:00
|
|
|
__this_cpu_inc(irq_pmi_count);
|
|
|
|
cpuc = this_cpu_ptr(&cpu_hw_events);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
/* Completely counting through the PMC's period to trigger a new PMC
|
|
|
|
* overflow interrupt while in this interrupt routine is utterly
|
|
|
|
* disastrous! The EV6 and EV67 counters are sufficiently large to
|
|
|
|
* prevent this but to be really sure disable the PMCs.
|
|
|
|
*/
|
|
|
|
wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
|
|
|
|
|
|
|
|
/* la_ptr is the counter that overflowed. */
|
2010-09-06 21:51:45 +08:00
|
|
|
if (unlikely(la_ptr >= alpha_pmu->num_pmcs)) {
|
2010-08-10 08:20:08 +08:00
|
|
|
/* This should never occur! */
|
|
|
|
irq_err_count++;
|
|
|
|
pr_warning("PMI: silly index %ld\n", la_ptr);
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
idx = la_ptr;
|
|
|
|
|
|
|
|
for (j = 0; j < cpuc->n_events; j++) {
|
|
|
|
if (cpuc->current_idx[j] == idx)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (unlikely(j == cpuc->n_events)) {
|
|
|
|
/* This can occur if the event is disabled right on a PMC overflow. */
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
event = cpuc->event[j];
|
|
|
|
|
|
|
|
if (unlikely(!event)) {
|
|
|
|
/* This should never occur! */
|
|
|
|
irq_err_count++;
|
|
|
|
pr_warning("PMI: No event at index %d!\n", idx);
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
hwc = &event->hw;
|
|
|
|
alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
|
2012-04-03 02:19:08 +08:00
|
|
|
perf_sample_data_init(&data, 0, hwc->last_period);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
|
|
|
if (alpha_perf_event_set_period(event, hwc, idx)) {
|
2011-06-27 20:41:57 +08:00
|
|
|
if (perf_event_overflow(event, &data, regs)) {
|
2010-08-10 08:20:08 +08:00
|
|
|
/* Interrupts coming too quickly; "throttle" the
|
|
|
|
* counter, i.e., disable it for a little while.
|
|
|
|
*/
|
2010-09-12 13:37:24 +08:00
|
|
|
alpha_pmu_stop(event, 0);
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Init call to initialise performance events at kernel startup.
|
|
|
|
*/
|
2010-11-26 01:38:29 +08:00
|
|
|
int __init init_hw_perf_events(void)
|
2010-08-10 08:20:08 +08:00
|
|
|
{
|
|
|
|
pr_info("Performance events: ");
|
|
|
|
|
|
|
|
if (!supported_cpu()) {
|
|
|
|
pr_cont("No support for your CPU.\n");
|
2010-11-26 01:38:29 +08:00
|
|
|
return 0;
|
2010-08-10 08:20:08 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
pr_cont("Supported CPU type!\n");
|
|
|
|
|
|
|
|
/* Override performance counter IRQ vector */
|
|
|
|
|
|
|
|
perf_irq = alpha_perf_event_irq_handler;
|
|
|
|
|
|
|
|
/* And set up PMU specification */
|
|
|
|
alpha_pmu = &ev67_pmu;
|
2010-06-11 19:35:08 +08:00
|
|
|
|
2010-11-18 06:17:36 +08:00
|
|
|
perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
|
2010-08-10 08:20:08 +08:00
|
|
|
|
2010-11-26 01:38:29 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
early_initcall(init_hw_perf_events);
|