openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/ethernet/qlogic/Kconfig

121 lines
3.1 KiB
Plaintext
Raw Normal View History

qlogic: Move the QLogic drivers Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-04-09 10:06:30 +08:00
#
# QLogic network device configuration
#
config NET_VENDOR_QLOGIC
bool "QLogic devices"
drivers/net/ethernet/*: Enabled vendor Kconfig options Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-23 16:29:52 +08:00
default y
qlogic: Move the QLogic drivers Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-04-09 10:06:30 +08:00
depends on PCI
---help---
drivers/net: remove all references to obsolete Ethernet-HOWTO This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 04:28:02 +08:00
If you have a network (Ethernet) card belonging to this class, say Y.
qlogic: Move the QLogic drivers Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-04-09 10:06:30 +08:00
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about QLogic cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_QLOGIC
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
---help---
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
qlcnic: Support SR-IOV enable and disable o Add QLCNIC_SRIOV to Kconfig. o Provide PCI sysfs hooks to enable and disable SR-IOV. o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined. o qlcnic_sriov_pf.c has all the PF related SR-IOV functionality. o qlcnic_sriov_common.c has VF functionality and SR-IOV functionality which is common between VF and PF. o qlcnic_sriov.h is a common header file for SR-IOV defines. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29 13:46:33 +08:00
config QLCNIC_SRIOV
bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
depends on QLCNIC && PCI_IOV
default y
---help---
This configuration parameter enables Single Root Input Output
Virtualization support for QLE83XX Converged Ethernet devices.
This allows for virtual function acceleration in virtualized
environments.
qlcnic: dcb: Query adapter DCB capabilities. o Query adapter DCB capabilities and populate local data structures with relevant information. o Add QLCNIC_DCB to Kconfig for enabling/disabling DCB. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-24 01:38:25 +08:00
config QLCNIC_DCB
bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
depends on QLCNIC && DCB
default y
---help---
This configuration parameter enables DCB support in QLE83XX
and QLE82XX Converged Ethernet devices. This allows for DCB
get operations support through rtNetlink interface. Only CEE
mode of DCB is supported. PG and PFC values are related only
to Tx.
qlcnic: Add hwmon interface to export board temperature. Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 05:43:57 +08:00
config QLCNIC_HWMON
bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
qlcnic: Fix Kconfig dependency on HWMON Commit 1f0f467b670e "qlcnic: Add hwmon interface to export board temperature" introduced a randconfig build error in the case when the hwmon framework is built as a module and the qlcnic driver itself is built-in: drivers/built-in.o: In function `qlcnic_register_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1301: undefined reference to `hwmon_device_register_with_groups' drivers/built-in.o: In function `qlcnic_unregister_hwmon_dev': drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c:1309: undefined reference to `hwmon_device_unregister'. This changes the Kconfig logic to enforce that the qlcnic hwmon support can only be enabled if it is possible to successfully build it. Signed-off-by: Harish Patil <harish.patil@qlogic.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 14:06:15 +08:00
depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
qlcnic: Add hwmon interface to export board temperature. Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 05:43:57 +08:00
default y
---help---
This configuration parameter can be used to read the
board temperature in Converged Ethernet devices
supported by qlcnic.
This data is available via the hwmon sysfs interface.
qlogic: Move the QLogic drivers Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-04-09 10:06:30 +08:00
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qlge.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
---help---
This enables the support for NetXen's Gigabit Ethernet card.
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
config QED
tristate "QLogic QED 25/40/100Gb core driver"
depends on PCI
qed: select ZLIB_INFLATE The newly added qlogic qed driver uses the zlib library, but misses the dependency: drivers/built-in.o: In function `qed_alloc_stream_mem': drivers/net/ethernet/qlogic/qed/qed_main.c:707: undefined reference to `zlib_inflate_workspacesize' drivers/built-in.o: In function `qed_unzip_data': drivers/net/ethernet/qlogic/qed/qed_main.c:675: undefined reference to `zlib_inflateInit2' This changes Kconfig to always select zlib when needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-10 18:28:15 +08:00
select ZLIB_INFLATE
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
---help---
This enables the support for ...
qed: Add Light L2 support Other protocols beside the networking driver need the ability of passing some L2 traffic, usually [although not limited] for the purpose of some management traffic. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02 02:59:55 +08:00
config QED_LL2
qede: Add qedr framework Adds a skeletal implementation of the qede RoCE driver - The qedr has some dependencies of the state of the underlying base interface. This adds some logic required with mutual registrations and the ability to pass updates on 'intresting' events. Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02 02:59:56 +08:00
bool
qed: Add Light L2 support Other protocols beside the networking driver need the ability of passing some L2 traffic, usually [although not limited] for the purpose of some management traffic. Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-02 02:59:55 +08:00
qed: Add CONFIG_QED_SRIOV Add support for a new Kconfig option for qed* driver which would allow [eventually] the support in VFs. This patch adds the necessary logic in the PF to learn about the possible VFs it will have to support [Based on PCI configuration space and HW], and prepare a database with an entry per-VF as infrastructure for future interaction with said VFs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:12 +08:00
config QED_SRIOV
bool "QLogic QED 25/40/100Gb SR-IOV support"
depends on QED && PCI_IOV
default y
---help---
This configuration parameter enables Single Root Input Output
Virtualization support for QED devices.
This allows for virtual function acceleration in virtualized
environments.
qede: Add basic Network driver The Qlogic Everest Driver for Ethernet is the Ethernet specific module for QL4xxx ethernet products by Qlogic. This patch adds a very minimal PCI driver, one that doesn't yet register a network device, but one that does interact with qed and does a basic initialization of the HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:27 +08:00
config QEDE
tristate "QLogic QED 25/40/100Gb Ethernet NIC"
depends on QED
qede: Add driver support for PTP This patch adds the driver support for, - Registering the ptp clock functionality with the OS. - Timestamping the Rx/Tx PTP packets. - Ethtool callbacks related to PTP. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15 16:24:11 +08:00
imply PTP_1588_CLOCK
qede: Add basic Network driver The Qlogic Everest Driver for Ethernet is the Ethernet specific module for QL4xxx ethernet products by Qlogic. This patch adds a very minimal PCI driver, one that doesn't yet register a network device, but one that does interact with qed and does a basic initialization of the HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:27 +08:00
---help---
This enables the support for ...
qed/qede: Add VXLAN tunnel slowpath configuration support This patch enables VXLAN tunnel on the adapter and add support for driver hooks to configure UDP ports for VXLAN tunnel offload to be performed by the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:30 +08:00
qed*: Fix Kconfig dependencies with INFINIBAND_QEDR The qedr driver would require a tristate Kconfig option [to allow it to compile as a module], and toward that end we've added the INFINIBAND_QEDR option. But as we've made the compilation of the qed/qede infrastructure required for RoCE dependent on the option we'd be facing linking difficulties in case that QED=y or QEDE=y, and INFINIBAND_QEDR=m. To resolve this, we seperate between the INFINIBAND_QEDR option and the infrastructure support in qed/qede by introducing a new QED_RDMA option which would be selected by INFINIBAND_QEDR but would be a boolean instead of a tristate; Following that, the qed/qede is fixed based on this new option so that all config combinations would be supported. Fixes: cee9fbd8e2e9 ("qede: add qedr framework") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14 03:57:02 +08:00
config QED_RDMA
bool
qed: Add support for hardware offloaded iSCSI. This adds the backbone required for the various HW initalizations which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-01 16:21:06 +08:00
config QED_ISCSI
bool
qed: Add support for hardware offloaded FCoE. This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15 22:28:22 +08:00
config QED_FCOE
bool
qlogic: Move the QLogic drivers Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
2011-04-09 10:06:30 +08:00
endif # NET_VENDOR_QLOGIC