openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/imx27.dtsi

578 lines
14 KiB
Plaintext
Raw Normal View History

ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
/*
* Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
ARM: imx: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 10:49:34 +08:00
#include "skeleton.dtsi"
ARM: dts: imx27 phyCARD-S pinctrl Add pinctrl nodes and properties for phyCARD-S device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-08 13:54:43 +08:00
#include "imx27-pinfunc.h"
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
#include <dt-bindings/clock/imx27-clock.h>
#include <dt-bindings/gpio/gpio.h>
ARM: dts: imx27-pdk: Add keypad support Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-18 02:23:31 +08:00
#include <dt-bindings/input/input.h>
ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-30 14:18:04 +08:00
#include <dt-bindings/interrupt-controller/irq.h>
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
/ {
aliases {
ARM: dts: imx: Add alias for ethernet controller Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-28 19:58:41 +08:00
ethernet0 = &fec;
ARM: dts: imx: add alias for gpio Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 14:01:28 +08:00
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
ARM: dts: i.MX27: Add i2c aliases This allows to order the i2c devices correctly. While at it reorder the aliases entries alphabetically. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-25 21:51:54 +08:00
i2c0 = &i2c1;
i2c1 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
ARM: dts: Add aliases for i.MX27 SPI controller Add aliases to determine the proper SPI bus number. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-05-01 18:46:57 +08:00
spi0 = &cspi1;
spi1 = &cspi2;
spi2 = &cspi3;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
};
ARM: imx27: Use 'AITC' for the interrupt controller name On the MX27 Reference Manual the interrupt controller is named AITC: ARM926EJ-S Interrupt Controller So use the AITC term instead of AVIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Origin: id:1334193132-18944-2-git-send-email-festevam@gmail.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:33 +08:00
aitc: aitc-interrupt-controller@e0000000 {
compatible = "fsl,imx27-aitc", "fsl,avic";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x10040000 0x1000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
ARM: dts: imx: add required #clock-cells for fixed-clock Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-11 09:56:46 +08:00
#clock-cells = <0>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
clock-frequency = <26000000>;
};
};
ARM: dts: imx27 cpufreq-cpu0 frequencies Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:36 +08:00
cpus {
#size-cells = <0>;
#address-cells = <1>;
ARM: dts: i.MX27: Add label to CPU node Add a label to i.MX27 CPU node. This change allows the reuse this node in the upper levels of the DTS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-20 15:17:56 +08:00
cpu: cpu@0 {
ARM: dts: imx27 cpufreq-cpu0 frequencies Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:36 +08:00
device_type = "cpu";
compatible = "arm,arm926ej-s";
operating-points = <
ARM: dts: imx27: Add core voltages This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes is documented in the datasheet, so we add a 266 MHz frequency for conform this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-13 12:34:44 +08:00
/* kHz uV */
266000 1300000
399000 1450000
ARM: dts: imx27 cpufreq-cpu0 frequencies Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:36 +08:00
>;
ARM: dts: i.MX27: Increase "clock-latency" value i.MX27 CPU can be clocked with a 32 kHz quartz, and not just 32768 Hz, so increase "clock-latency" value, which will ensure that we use two clock cycles on frequency change. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-20 15:17:57 +08:00
clock-latency = <62500>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_CPU_DIV>;
ARM: dts: imx27: Add core voltages This patch adds core voltages for i.MX27 CPUs. Only 266 and 400 MHz modes is documented in the datasheet, so we add a 266 MHz frequency for conform this. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-13 12:34:44 +08:00
voltage-tolerance = <5>;
ARM: dts: imx27 cpufreq-cpu0 frequencies Set operating-points for imx27. There is no regulator support, so the voltages are 0. The frequencies should be the same for all imx27 boards, so it is defined here and can be overwritten if necessary. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:36 +08:00
};
};
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ARM: imx27: Use 'AITC' for the interrupt controller name On the MX27 Reference Manual the interrupt controller is named AITC: ARM926EJ-S Interrupt Controller So use the AITC term instead of AVIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Origin: id:1334193132-18944-2-git-send-email-festevam@gmail.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:33 +08:00
interrupt-parent = <&aitc>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
ranges;
aipi@10000000 { /* AIPI1 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ARM: dts: mx27: Fix the AIPI bus for FEC FEC controller is connected to AIPI2 bus. Also fix the AIPI1 address range. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22 03:19:38 +08:00
reg = <0x10000000 0x20000>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
ranges;
ARM: dts: i.MX27: Add DMA devicetree node This patch adds the missing DMA devicetree node for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:36 +08:00
dma: dma@10001000 {
compatible = "fsl,imx27-dma";
reg = <0x10001000 0x1000>;
interrupts = <32>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
<&clks IMX27_CLK_DMA_AHB_GATE>;
ARM: dts: i.MX27: Add DMA devicetree node This patch adds the missing DMA devicetree node for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:36 +08:00
clock-names = "ipg", "ahb";
#dma-cells = <1>;
#dma-channels = <16>;
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
wdog: wdog@10002000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
reg = <0x10002000 0x1000>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
interrupts = <27>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
};
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
ARM: dts: imx27: Rename PWM devicetree node i.MX27 have only one PWM, so index from PWM devicetree node removed. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:47 +08:00
pwm: pwm@10006000 {
ARM: imx27: add missing #pwm-cells property The pwm-node is missing its #pwm-cells property. The pwm-framework will complain about this. Add the missing property. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-17 21:03:16 +08:00
#pwm-cells = <2>;
ARM: imx27: Add PWM0 to device tree Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-14 15:44:25 +08:00
compatible = "fsl,imx27-pwm";
reg = <0x10006000 0x1000>;
interrupts = <23>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: imx27: Add PWM0 to device tree Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-14 15:44:25 +08:00
clock-names = "ipg", "per";
};
ARM: dts: imx27: Add kpp devicetree node This patch adds the missing (Keypad Port) KPP devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:50 +08:00
kpp: kpp@10008000 {
compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
reg = <0x10008000 0x1000>;
interrupts = <21>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
ARM: dts: imx27: Add kpp devicetree node This patch adds the missing (Keypad Port) KPP devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:50 +08:00
status = "disabled";
};
ARM: dts: imx27: Add 1-wire Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 17:21:22 +08:00
owire: owire@10009000 {
compatible = "fsl,imx27-owire", "fsl,imx21-owire";
reg = <0x10009000 0x1000>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
ARM: dts: imx27: Add 1-wire Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-01 17:21:22 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart1: serial@1000a000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart2: serial@1000b000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart3: serial@1000c000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart4: serial@1000d000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
cspi1: cspi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000e000 0x1000>;
interrupts = <16>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
cspi2: cspi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x1000f000 0x1000>;
interrupts = <15>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: dts: i.MX27: Add SSI nodes This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-05 02:28:35 +08:00
ssi1: ssi@10010000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10010000 0x1000>;
interrupts = <14>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
ARM: dts: i.MX27: Add SSI nodes This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-05 02:28:35 +08:00
dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
status = "disabled";
};
ssi2: ssi@10011000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
reg = <0x10011000 0x1000>;
interrupts = <13>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
ARM: dts: i.MX27: Add SSI nodes This patch adds the missing (Synchronous Serial Interface) SSI1 & SSI2 devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-01-05 02:28:35 +08:00
dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
dma-names = "rx0", "tx0", "rx1", "tx1";
fsl,fifo-depth = <8>;
status = "disabled";
};
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-09-14 15:19:00 +08:00
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
reg = <0x10012000 0x1000>;
interrupts = <12>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: dts: i.MX27: Add SDHC devicetree nodes This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:37 +08:00
sdhci1: sdhci@10013000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10013000 0x1000>;
interrupts = <11>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: dts: i.MX27: Add SDHC devicetree nodes This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:37 +08:00
clock-names = "ipg", "per";
dmas = <&dma 7>;
dma-names = "rx-tx";
status = "disabled";
};
sdhci2: sdhci@10014000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x10014000 0x1000>;
interrupts = <10>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: dts: i.MX27: Add SDHC devicetree nodes This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:37 +08:00
clock-names = "ipg", "per";
dmas = <&dma 6>;
dma-names = "rx-tx";
status = "disabled";
};
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
iomuxc: iomuxc@10015000 {
compatible = "fsl,imx27-iomuxc";
reg = <0x10015000 0x600>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio1: gpio@10015000 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015000 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015100 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015200 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015300 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015400 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
reg = <0x10015500 0x100>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
ARM: dts: imx27 iomux device node This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-11-20 16:45:48 +08:00
interrupts = <8>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
};
ARM: dts: imx27: Add AUDMUX devicetree node This patch adds the missing (Digital Audio MUX) AUDMUX devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:46 +08:00
audmux: audmux@10016000 {
compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
reg = <0x10016000 0x1000>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_DUMMY>;
ARM: dts: imx27: Add AUDMUX devicetree node This patch adds the missing (Digital Audio MUX) AUDMUX devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:46 +08:00
clock-names = "audmux";
ARM: dts: i.MX27: Disable AUDMUX in the template AUDMUX expects additional parameters to be configured correctly, so turn it off into a template. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-10 16:51:50 +08:00
status = "disabled";
ARM: dts: imx27: Add AUDMUX devicetree node This patch adds the missing (Digital Audio MUX) AUDMUX devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:46 +08:00
};
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
cspi3: cspi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
reg = <0x10017000 0x1000>;
interrupts = <6>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart5: serial@1001b000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
uart6: serial@1001c000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: mx27: Replace clk_register_clkdev with clock DT lookup Similarly as it was done for mx6q, use a DT lookup in order to make maintainance task for the clock devices easier. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-29 01:55:30 +08:00
clock-names = "ipg", "per";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
i2c2: i2c@1001d000 {
#address-cells = <1>;
#size-cells = <0>;
i2c: imx: remove cpu_is_xxx by using platform_device_id This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
2012-09-14 15:19:00 +08:00
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
reg = <0x1001d000 0x1000>;
interrupts = <1>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
ARM: dts: i.MX27: Add SDHC devicetree nodes This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:37 +08:00
sdhci3: sdhci@1001e000 {
compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
reg = <0x1001e000 0x1000>;
interrupts = <9>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
<&clks IMX27_CLK_PER2_GATE>;
ARM: dts: i.MX27: Add SDHC devicetree nodes This patch adds the missing SDHC devicetree nodes for i.MX27 SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutonix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-08 22:39:37 +08:00
clock-names = "ipg", "per";
dmas = <&dma 36>;
dma-names = "rx-tx";
status = "disabled";
};
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
<&clks IMX27_CLK_PER1_GATE>;
ARM: i.MX27: Add clocks to GPT devicetree nodes Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:09:02 +08:00
clock-names = "ipg", "per";
ARM: i.MX27: Add GPT devicetree nodes The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-14 20:08:57 +08:00
};
ARM: dts: mx27: Fix the AIPI bus for FEC FEC controller is connected to AIPI2 bus. Also fix the AIPI1 address range. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-11-22 03:19:38 +08:00
};
aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10020000 0x20000>;
ranges;
ARM: dts: imx27: Add imx framebuffer device Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:34 +08:00
fb: fb@10021000 {
compatible = "fsl,imx27-fb", "fsl,imx21-fb";
interrupts = <61>;
reg = <0x10021000 0x1000>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
<&clks IMX27_CLK_LCDC_AHB_GATE>,
<&clks IMX27_CLK_PER3_GATE>;
ARM: dts: imx27: Add imx framebuffer device Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-28 22:50:34 +08:00
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
ARM: dts: imx27: Add VPU devicetree node This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-15 20:22:58 +08:00
coda: coda@10023000 {
ARM: dts: imx: Update VPU compatible strings Update the VPU compatible strings to also use "cnm,coda<model>". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-27 20:18:19 +08:00
compatible = "fsl,imx27-vpu", "cnm,codadx6";
ARM: dts: imx27: Add VPU devicetree node This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-15 20:22:58 +08:00
reg = <0x10023000 0x0200>;
interrupts = <53>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
<&clks IMX27_CLK_VPU_AHB_GATE>;
ARM: dts: imx27: Add VPU devicetree node This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-15 20:22:58 +08:00
clock-names = "per", "ahb";
iram = <&iram>;
};
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
usbotg: usb@10024000 {
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
usbh1: usb@10024200 {
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
fsl,usbmisc = <&usbmisc 1>;
ARM: dts: imx: Add dr_mode host setting to all host-only usb instances The chipidea driver adds an extra line of spam to the log when a host-only chipidea instance is left set to the default of a dual role controller. [ 2.010873] ci_hdrc ci_hdrc.1: doesn't support gadget Set the dr_mode property to host on all the host-only nodes to avoid this warning. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-27 22:06:00 +08:00
dr_mode = "host";
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
status = "disabled";
};
usbh2: usb@10024400 {
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
fsl,usbmisc = <&usbmisc 2>;
ARM: dts: imx: Add dr_mode host setting to all host-only usb instances The chipidea driver adds an extra line of spam to the log when a host-only chipidea instance is left set to the default of a dual role controller. [ 2.010873] ci_hdrc ci_hdrc.1: doesn't support gadget Set the dr_mode property to host on all the host-only nodes to avoid this warning. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-02-27 22:06:00 +08:00
dr_mode = "host";
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
status = "disabled";
};
usbmisc: usbmisc@10024600 {
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
ARM: dts: i.MX27: Add USB nodes This patch adds the missing (Universal serial bus) USB devicetree nodes for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-22 17:32:33 +08:00
};
ARM: dts: imx27: Add SAHARA2 devicetree node This patch adds the missing (Symmetric/Asymmetric Hashing and Random Accelerator) SAHARA2 devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:45 +08:00
sahara2: sahara@10025000 {
compatible = "fsl,imx27-sahara";
reg = <0x10025000 0x1000>;
interrupts = <59>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
<&clks IMX27_CLK_SAHARA_AHB_GATE>;
ARM: dts: imx27: Add SAHARA2 devicetree node This patch adds the missing (Symmetric/Asymmetric Hashing and Random Accelerator) SAHARA2 devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:45 +08:00
clock-names = "ipg", "ahb";
};
ARM: dts: imx27: Add VPU devicetree node This patch adds the missing VPU devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-15 20:22:58 +08:00
clks: ccm@10027000{
compatible = "fsl,imx27-ccm";
reg = <0x10027000 0x1000>;
#clock-cells = <1>;
};
ARM: dts: i.MX27: Move IIM node under AIPI2 bus This patch moves IIM node under AIPI2 bus, since this is proper location for this module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03 00:02:24 +08:00
iim: iim@10028000 {
compatible = "fsl,imx27-iim";
reg = <0x10028000 0x1000>;
interrupts = <62>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
ARM: dts: i.MX27: Move IIM node under AIPI2 bus This patch moves IIM node under AIPI2 bus, since this is proper location for this module. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03 00:02:24 +08:00
};
ARM: imx: rename uart and fec device tree nodes It has been pointed out by device tree maintainer for several times that the generic names 'serial' and 'ethernet' should be used for those devices per ePAPR. Renames imx uart and fec device tree nodes to stop them being bad examples. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-02 14:39:26 +08:00
fec: ethernet@1002b000 {
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
compatible = "fsl,imx27-fec";
ARM: dts: imx27: only map 4 Kbyte for fec registers According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3eb88 ("ARM i.MX27: Add devicetree support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-05-13 06:18:26 +08:00
reg = <0x1002b000 0x1000>;
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
interrupts = <50>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
<&clks IMX27_CLK_FEC_AHB_GATE>;
ARM: dts: i.MX27: Remove optional "ptp" clock source for FEC Patch removes optional "ptp" clock source for FEC. This clock is missing in i.MX27. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-20 15:17:55 +08:00
clock-names = "ipg", "ahb";
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
status = "disabled";
};
};
ARM i.MX dts: Consistently add labels to devicenodes Having labels before each node allows board bindings to reference to nodes by using the &nodename {} notation. This way boards do not have to resemble the whole devicetree layout. Due to less indention needed the board files also get better readability. Since the label make the documentation behind the nodes unnecessary it is removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-15 16:31:52 +08:00
nfc: nand@d8000000 {
ARM: imx: add mxc_nand to imx27 device tree Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-04-23 17:23:42 +08:00
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx27-nand";
reg = <0xd8000000 0x1000>;
interrupts = <29>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
ARM: imx: add mxc_nand to imx27 device tree Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-04-23 17:23:42 +08:00
status = "disabled";
};
ARM: dts: imx27: Sort entries by address Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:48 +08:00
ARM: dts: i.MX27: Add WEIM node This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03 00:02:25 +08:00
weim: weim@d8002000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,imx27-weim";
reg = <0xd8002000 0x1000>;
ARM: i.MX27 clk: dts: Use clock defines in DTS files Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-05 13:36:07 +08:00
clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
ARM: dts: i.MX27: Add WEIM node This patch adds the missing (Wireless External Interface Module) WEIM devicetree node for i.MX27 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-07-03 00:02:25 +08:00
ranges = <
0 0 0xc0000000 0x08000000
1 0 0xc8000000 0x08000000
2 0 0xd0000000 0x02000000
3 0 0xd2000000 0x02000000
4 0 0xd4000000 0x02000000
5 0 0xd6000000 0x02000000
>;
status = "disabled";
};
ARM: dts: imx27: Sort entries by address Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-23 14:54:48 +08:00
iram: iram@ffff4c00 {
compatible = "mmio-sram";
reg = <0xffff4c00 0xb400>;
};
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
};
};