openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm64/configs/defconfig

862 lines
19 KiB
Plaintext
Raw Normal View History

arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_PREEMPT=y
arm64: defconfig: enable fine-grained task level IRQ time accounting Tests showed, that under certain conditions, the summary number of jiffies spent on softirq/idle, which are counted by system statistics can be even below 10% of expected value, resulting in false load presentation. The issue was observed on the quad-core Marvell Armada 8k SoC, whose two 10G ports were bound into L2 bridge. Load was controlled by bidirectional UDP traffic, produced by a packet generator. Under such condition, the dominant load is softirq. With 100% single CPU occupation or without any activity (all CPUs 100% idle), total number of jiffies is 10000 (2500 per each core) in 10s interval. Also with other kind of load this was true. However below a saturation threshold it was observed, that with CPU which was occupied almost by softirqs only, the statistic were awkward. See the mpstat output: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle all 0.00 0.00 0.13 0.00 0.00 0.55 0.00 0.00 0.00 99.32 0 0.00 0.00 0.00 0.00 0.00 23.08 0.00 0.00 0.00 76.92 1 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 99.60 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 3 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Above would mean basically no total load, debug CPU0 occupied in 25%. Raw statistics, printed every 10s from /proc/stat unveiled a root cause - summary idle/softirq jiffies on loaded CPU were below 200, i.e. over 90% samples lost. All problems were gone after enabling fine granulity IRQ time accounting. This patch fixes possible wrong statistics processing by enabling CONFIG_IRQ_TIME_ACCOUNTING for arm64 platfroms, which is by default done on other architectures, e.g. x86 and arm. Tests showed no noticeable performance penalty, nor stability impact. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-01 04:22:11 +08:00
CONFIG_IRQ_TIME_ACCOUNTING=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
arm64: defconfig: Enable NUMA and NUMA_BALANCING Since much more arm64 SoCs with numa nodes, it's better to enable NUMA and NUMA_BALANCING to improve the performance on test. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-18 13:57:19 +08:00
CONFIG_NUMA_BALANCING=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_PIDS=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_CGROUP_HUGETLB=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_USER_NS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
arm64: defconfig: include the Agilex platform to the arm64 defconfig Build the Agilex platform in the standard arm64 defconfig. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-04-04 05:50:10 +08:00
CONFIG_ARCH_AGILEX=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_ARCH_SUNXI=y
arm64: defconfig: enable the Alpine family Enable the Alpine SoC family in the arm64 defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-25 18:14:53 +08:00
CONFIG_ARCH_ALPINE=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_ARCH_BCM2835=y
arm64: Add Broadcom iProc family support This patch adds support to Broadcom's iProc family of arm64 based SoCs in the arm64 Kconfig and defconfig files Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 06:42:20 +08:00
CONFIG_ARCH_BCM_IPROC=y
arm64: Enable Marvell Berlin SoC family in defconfig Enable Marvell Berlin SoC family in arm64 defconfig. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-04 03:24:46 +08:00
CONFIG_ARCH_BERLIN=y
arm64: defconfig: Enable ARCH_BRCMSTB ARCH_BRCMSTB was one of the few platforms that were not enabled by default, since we are now adding more and more drivers relevant to that platform get some proper build coverage. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-08 00:56:33 +08:00
CONFIG_ARCH_BRCMSTB=y
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS The ARMv8 Exynos family SoCs in Linux kernel are currently: - Exynos5433 (controlled by ARCH_EXYNOS), - Exynos7 (controlled by ARCH_EXYNOS7). It duplicates Kconfig symbols unnecessarily, so consolidate them into one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS symbol. The commit should not bring any visible functional change. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
2015-11-16 09:09:13 +08:00
CONFIG_ARCH_EXYNOS=y
arm64: defconfig: Enable TI's AM6 SoC platform Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28 08:46:50 +08:00
CONFIG_ARCH_K3=y
arm64: Use generic Layerscape SoC family naming Freescale will be a spinning-out a set of ARMv8 based SoCs which will be based on a similar overall SoC architecture. So, this patch converts the existing infrastructure in the arm64/dts, arm64/Kconfig and arm64/configs to use the generic convention ARCH_LAYERSCAPE in place of the more specific FSL_LS2085A, to save code duplication later-on. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-24 03:31:50 +08:00
CONFIG_ARCH_LAYERSCAPE=y
arm64: defconfig: enable ARCH_LG1K Enable building LG1K support in the defconfig. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-11 19:54:45 +08:00
CONFIG_ARCH_LG1K=y
arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig This patch introduces ARCH_HISI to enable Hisilicon SoC family in Kconfig and defconfig. Signed-off-by: Bintian Wang <bintian.wang@huawei.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Wei Xu <xuwei5@hisilicon.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2015-01-06 09:30:36 +08:00
CONFIG_ARCH_HISI=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_ARCH_MEDIATEK=y
arm64: defconfig: enable basic boot for Amlogic meson Enables basic arch and serial console support for Amlogic meson family SoCs. Tested with Amlogic P200 and Hardkernel ODROID-C2 boards. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-03-24 02:49:53 +08:00
CONFIG_ARCH_MESON=y
mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEUEABECAAYFAlbElN0ACgkQCwYYjhRyO9XkzgCfaYJggCHzsLpMvnTK1bMNgPCY jYkAmOIRjMJskq40RBXSXpyoJboqyZs= =tAva -----END PGP SIGNATURE----- Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into next/arm64 mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) * tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable Armada 3700 related config Documentation: arm: update supported Marvell EBU processors MAINTAINERS: Extend dts entry for ARM64 mvebu files arm64: add mvebu architecture entry irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected ARM: mvebu: Use the ARMADA_370_XP_IRQ option irqchip/armada-370-xp: Allow allocation of multiple MSIs irqchip/armada-370-xp: Use shorter names for irq_chip irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate irqchip/armada-370-xp: Use the generic MSI infrastructure irqchip/armada-370-xp: Add Kconfig option for the driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 08:44:14 +08:00
CONFIG_ARCH_MVEBU=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_ARCH_MXC=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_QCOM=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_ARCH_RENESAS=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
arm64: dts: Add base stratix 10 dtsi Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node
2015-08-05 12:25:50 +08:00
CONFIG_ARCH_STRATIX10=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_ARCH_SYNQUACER=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_ARCH_TEGRA=y
arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig Adds support for Spreadtrum's SoC Platform in the arm64 Kconfig and defconfig files. Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
2015-03-11 10:27:08 +08:00
CONFIG_ARCH_SPRD=y
arm64, defconfig: Enable Cavium Thunder SoC in defconfig This patch enables Thunder SoCs in the arm64 defconfig. This is esp. useful to add Thunder platforms to automated builds based on arm64 defconfig. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-18 23:51:06 +08:00
CONFIG_ARCH_THUNDER=y
arm64: add ARCH_THUNDER2 to defconfig This will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-05 08:57:06 +08:00
CONFIG_ARCH_THUNDER2=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_ARCH_UNIPHIER=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_ARCH_VEXPRESS=y
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_ARCH_XGENE=y
arm64: defconfig: enable ZTE ZX related config This patch enables the configuration for the ZTE ZX family. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-13 09:42:06 +08:00
CONFIG_ARCH_ZX=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_ARCH_ZYNQMP=y
arm64: defconfig: enable 48-bit virtual addresses Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous DDR regions that require 48-bit VA to have the linear map cover the entire range of DDR. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:34 +08:00
CONFIG_ARM64_VA_BITS_48=y
ARM64: Enable multi-core scheduler support by default Make sure that the task scheduler domain hierarchy is set-up correctly on systems with single or multi-cluster topology. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-20 00:55:49 +08:00
CONFIG_SCHED_MC=y
arm64: defconfig: Enable NUMA and NUMA_BALANCING Since much more arm64 SoCs with numa nodes, it's better to enable NUMA and NUMA_BALANCING to improve the performance on test. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-18 13:57:19 +08:00
CONFIG_NUMA=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_SECCOMP=y
arm64/kexec: Enable kexec in the arm64 defconfig Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-24 01:54:48 +08:00
CONFIG_KEXEC=y
arm64: kdump: enable kdump in defconfig Kdump is enabled by default as kexec is. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-04-03 10:24:39 +08:00
CONFIG_CRASH_DUMP=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_XEN=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_COMPAT=y
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE For testing coverage and improved defense in depth, enable KASLR by default. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-25 01:58:50 +08:00
CONFIG_RANDOMIZE_BASE=y
arm64: Enable HIBERNATION in defconfig This patch adds CONFIG_HIBERNATION to the arm64 defconfig. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-18 00:24:04 +08:00
CONFIG_HIBERNATION=y
arm64: defconfig: Enable CONFIG_WQ_POWER_EFFICIENT_DEFAULT commit cee22a15052f ("workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues") introduced the concept of power efficient workqueues (4 years back), but it was never enabled in upstream kernel configs. Power efficient workqueues are simply marked as "unbound," so that jobs queued to them can run on any CPU in the system. It leaves the target CPU selection to the scheduler, which is the best place for such decision making. This improves power efficiency for workqueues which are otherwise pinned to a CPU. Enable it for ARM64 platforms as ARM platforms were the main target for the introduction of power efficient workqueues. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-03 18:28:41 +08:00
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64 ARM32 and ARM64 have the same DT definitions and the same approaches. The generic ARM cpuidle driver can be put in common for those two architectures. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Rob Herring <robherring2@gmail.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-02-02 23:32:46 +08:00
CONFIG_ARM_CPUIDLE=y
arm64: defconfig: Enable the PSCI CPUidle driver Enable the PSCI CPUidle driver to replace the functionality previously provided by the generic ARM CPUidle driver through CPU operations. Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.com Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14 20:52:38 +08:00
CONFIG_ARM_PSCI_CPUIDLE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CPU_FREQ=y
arm64: defconfig: enable more cpufreq governors Enable the various CPUFREQ governors and statistics to ease development. Don't change the default governor - performance governor. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-06 21:05:03 +08:00
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
arm64: defconfig: enable common modules for power management Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-01 12:51:09 +08:00
CONFIG_CPUFREQ_DT=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_ACPI_CPPC_CPUFREQ=m
arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ Add the cpu frequency scaling support for Armada 37xx by default, this should allow a better coverage in kernel continuous integration tests. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-12-15 23:25:01 +08:00
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_SCPI_CPUFREQ=y
arm64: defconfig: ARM_IMX_CPUFREQ_DT=m For imx8m we need a separate small driver to read "speed grading" information from fuses and determine which OPPs are supported. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21 16:04:23 +08:00
CONFIG_ARM_IMX_CPUFREQ_DT=m
arm64: defconfig: enable cpufreq support for RPi3 This enables both the new firmware clock driver and cpufreq driver available for the RPi3 family of boards. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-06-13 02:24:59 +08:00
CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ Enable Tegra186 CPU frequency scaling support by default. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-16 19:46:51 +08:00
CONFIG_ARM_TEGRA186_CPUFREQ=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
arm64: defconfig: enable fpga and service layer Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10 service layer, and Altera Freeze Bridge drivers. Intel Stratix10 service layer driver was added with commit 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver"). Intel Stratix10 service layer provides kernel APIs for drivers to request access to the secure features. Such features include FPGA programming, remote status update, and read and write secure registers. While clients of the service layer can be built as modules, the service layer itself has to be configured as built-in. The service layer is dependent on ARCH_STRATIX10. Enabling Altera Freeze Bridge depends on commit 38cd7ad5bd25 ("fpga: altera_freeze_bridge: remove restriction to socfpga"). Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-29 00:18:42 +08:00
CONFIG_INTEL_STRATIX10_SERVICE=y
arm64: defconfig: Enable TI_SCI related configs Enable TI System Control Interface (TI_SCI) Message Protocol library and it's relevant power management drivers using this library. TI's AM6 SoC uses this TI_SCI library to communicate to its system controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver using which this communication happens. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:03:30 +08:00
CONFIG_TI_SCI_PROTOCOL=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_EFI_CAPSULE_LOADER=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_IMX_SCU=y
CONFIG_IMX_SCU_PD=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_ACPI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
arm64: defconfig: Enable CONFIG_ACPI_APEI_PCIEAER Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have been enabled in the default config. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-07-29 09:32:24 +08:00
CONFIG_ACPI_APEI_PCIEAER=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=m
CONFIG_CRYPTO_SM3_ARM64_CE=m
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_KSM=y
CONFIG_MEMORY_FAILURE=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CMA=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_IP_MULTICAST=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_IPV6=m
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
arm64: defconfig: Enable Qualcomm QRTR The QRTR packet family is used for a wide range of communication between services in Qualcomm platforms. Examples of services using this transport for communication are remoteproc management, modem control, positioning, power management and WiFi. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-08-28 13:14:43 +08:00
CONFIG_QRTR=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_BPF_JIT=y
arm64: defconfig: enable bluetooth supports as modules Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:07 +08:00
CONFIG_BT=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_DEBUGFS is not set
arm64: defconfig: Enable bluetooth USB support Enable the Bluetooth USB controller which is present in the RK3399 Kevin Chromebook. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:02 +08:00
CONFIG_BT_HCIBTUSB=m
arm64: defconfig: enable bluetooth supports as modules Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:07 +08:00
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_LL=y
arm64: defconfig: Enable LAN and BT support for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 19:28:41 +08:00
CONFIG_BT_HCIUART_BCM=y
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
CONFIG_RFKILL=m
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_IOV=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIE_RCAR=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_PCIE_ALTERA=y
CONFIG_PCIE_ALTERA_MSI=y
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
CONFIG_PCIE_ROCKCHIP_HOST=m
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
arm64: defconfig: Add Tegra194 PCIe driver Add PCIe host controller driver for DesignWare core based PCIe controller IP present in Tegra194. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-06-12 17:53:39 +08:00
CONFIG_PCIE_TEGRA194=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEVTMPFS=y
arm64: defconfig: enable devtmpfs mount option Matching x86 and making it more convenient to run the arm64 default kernel as distros like Ubuntu need this option. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-30 23:06:34 +08:00
CONFIG_DEVTMPFS_MOUNT=y
arm64: defconfig: Enable SDMA on i.mx8mq/8mm Enable SDMA support on i.mx8mq/8mm chips, including enabling CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK for firmware loaded by udev. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-17 14:47:10 +08:00
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
arm64: defconfig: Enable HISILICON_LPC Now that the driver has been merged for the HiSilicon LPC host, enable the relevant config. Turning on this config will also enable config INDIRECT_PIO, which would have not been enabled previously - see config info for more details. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-04-30 23:15:40 +08:00
CONFIG_HISILICON_LPC=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_SIMPLE_PM_BUS=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD=y
arm64: defconfig: enable CONFIG_MTD_BLOCK Enable the block layer support for MTD devices. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30 09:55:46 +08:00
CONFIG_MTD_BLOCK=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD_M25P80=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 23:47:44 +08:00
CONFIG_MTD_RAW_NAND=y
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT Enable the NAND framework and the Denali NAND controller driver. This NAND controller is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30 09:55:47 +08:00
CONFIG_MTD_NAND_DENALI_DT=y
mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs Choose to compile and embed marvell_nand.c as NAND controller driver instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU SoCs. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-09 18:36:34 +08:00
CONFIG_MTD_NAND_MARVELL=y
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074 QCOM IPQ8074 boards contain NAND flash memory for which this config needs to be enabled. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-06 17:20:30 +08:00
CONFIG_MTD_NAND_QCOM=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD_SPI_NOR=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_BLK_DEV_LOOP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_BLK_DEV_NBD=m
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_BLK=y
arm64: defconfig: enable BLK_DEV_NVME NVME is non-volatile storage media attached via PCIe. NVME devices typically have much higher potential throughput than other block devices, like SATA, NVME is a must-have requirement for ARM64 based servers. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:41 +08:00
CONFIG_BLK_DEV_NVME=m
arm64: defconfig: enable Generic on-chip SRAM driver Most of the ARM SoCs have small SRAM memory used for various purposes that require faster access to data compared to normal DDR. This patch enables the Generic on-chip SRAM driver on ARM64. Cc: Kevin Hilman <khilman@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-20 23:24:08 +08:00
CONFIG_SRAM=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_EEPROM_AT25=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
arm64: defconfig: enable SCSI_HISI_SAS_PCI Enable HiSilicon SAS controller based on PCI device, which is included in hip08 SoC. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-07-18 19:44:57 +08:00
CONFIG_SCSI_HISI_SAS_PCI=y
arm64 defconfig: enable MPT3 SAS and BNX2X drivers ThunderX2 server requires both to provide storage and network. 05:00.0 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 05:00.1 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 8d:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01) Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18 00:04:10 +08:00
CONFIG_SCSI_MPT3SAS=m
arm64: defconfig: Update UFSHCD for Hi3660 soc Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs") set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends on (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD) were left to being built as modules. Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed" that by reverting to 'CONFIG_SCSI_UFS_HISI=m'. Thing is, if the rootfs is stored in the on-board flash (which is the "canonical" way of doing things), we either need these drivers to be built-in, or we need to fiddle with an initramfs to access that flash and eventually load the modules installed over there. The former is the easiest, do that. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17 01:02:21 +08:00
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_SCSI_UFS_QCOM=m
arm64: defconfig: Update UFSHCD for Hi3660 soc Commit 7ee7ef24d02d ("scsi: arm64: defconfig: enable configs for Hisilicon ufs") set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends on (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD) were left to being built as modules. Commit 1f4fa50dd48f ("arm64: defconfig: Regenerate for v4.20") "fixed" that by reverting to 'CONFIG_SCSI_UFS_HISI=m'. Thing is, if the rootfs is stored in the on-board flash (which is the "canonical" way of doing things), we either need these drivers to be built-in, or we need to fiddle with an initramfs to access that flash and eventually load the modules installed over there. The former is the easiest, do that. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17 01:02:21 +08:00
CONFIG_SCSI_UFS_HISI=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_ATA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
arm64: defconfig: Add Ceva ahci to the defconfig The Ceva ahci controller is available on the Xilinx Zynq UltraScale+ MPSoC. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [catalin.marinas@arm.com: removed unnecessary defconfig changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-29 13:02:08 +08:00
CONFIG_AHCI_CEVA=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_AHCI_MVEBU=y
arm64: configs: Enable X-Gene SATA and ethernet in defconfig Currently when run on an APM platform the ARMv8 defconfig has no viable options for rootfs other than ramdisk which is rather limiting. Since we already have both SATA and the bits needed for NFS root enabled we just need to enable the relevant drivers so do that, helping enable direct testing of upstream. If the configuration ends up becoming too big we can consider modularising some of the drivers and asking people to use an initramfs but for now this is not an issue. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-08-15 03:57:16 +08:00
CONFIG_AHCI_XGENE=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_AHCI_QORIQ=y
arm64: defconfig: Add Juno SATA controller The ARM Juno (r1 and r2) boards feature a SATA controller soldered on the board and connected to the PCI bus. Add the respective driver to defconfig to get hard disks supported out of the box on the Junos. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-05 17:44:18 +08:00
CONFIG_SATA_SIL24=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SATA_RCAR=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
arm64 defconfig: enable LVM support W dniu 19.06.2019 o 16:21, Olof Johansson pisze: > On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote: >> Follow x86-64 defconfig on enabling basic LVM support. >> >> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> > > Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that > will hold modules. Right. Forgot to change. From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Date: Mon, 27 May 2019 20:14:34 +0200 Subject: [PATCH 1/3] arm64 defconfig: enable LVM support Follow x86-64 defconfig on enabling basic LVM support. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-20 18:17:06 +08:00
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NETDEVICES=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TUN=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_VETH=m
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_NET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_AMD_XGBE=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_NET_XGENE=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_ATL1C=m
arm64 defconfig: enable MPT3 SAS and BNX2X drivers ThunderX2 server requires both to provide storage and network. 05:00.0 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 05:00.1 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 8d:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01) Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18 00:04:10 +08:00
CONFIG_BNX2X=m
arm64: defconfig: Enable Cadence MACB/GEM support This patch enables the cadence MACB/GEM support that is needed by lg1k SoCs. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-01 09:39:59 +08:00
CONFIG_MACB=y
arm64: Add ThunderX drivers to defconfig ThunderX needs its PCI host drivers to do anything useful, and it's probably helpful to have networking by default too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-11 23:15:41 +08:00
CONFIG_THUNDER_NIC_PF=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_FEC=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_HIX5HD2_GMAC=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
arm64: defconfig: enable HiSilicon HNS3 driver Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-09-13 18:56:43 +08:00
CONFIG_HNS3=y
CONFIG_HNS3_HCLGE=y
CONFIG_HNS3_ENET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
arm64 defconfig: enable Mellanox cards Mellanox cards are present in several AArch64 servers. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-18 00:04:11 +08:00
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_EN_ARFS=y
CONFIG_MLX5_EN_RXNFC=y
CONFIG_MLX5_MPFS=y
arm64: defconfig: enable MVNETA Now that the Armada 37xx SoCs support the mvneta driver, enable it by default. It is especially useful when booting on an NFS root. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-21 01:27:17 +08:00
CONFIG_MVNETA=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MVPP2=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_SKY2=y
arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers The EMAC is present on Qualcomm Technologies' server and some mobile chips, and is used as the primary Ethernet interface. Systems that have these SOCs typically have an Atheros 803x or Marvell 88e1111 PHY in them, so enable those drivers too. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:47 +08:00
CONFIG_QCOM_EMAC=m
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_RAVB=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SMC91X=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_SMSC911X=y
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 20:23:27 +08:00
CONFIG_SNI_AVE=y
arm64: defconfig: add support for Socionext SynQuacer based platforms Enable support in arm64's defconfig for Socionext SynQuacer based platforms, by enabling the arch Kconfig symbol, and enabling builtin support for the ethernet, GPIO and SDHCI controllers Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-14 17:26:37 +08:00
CONFIG_SNI_NETSEC=y
arm64: defconfig: enable stmmac and realtek PHY as modules Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the meson-gxbb-p20x boards is already enabled. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-06-04 06:38:15 +08:00
CONFIG_STMMAC_ETH=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MDIO_BUS_MUX_MMIOREG=y
arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers The EMAC is present on Qualcomm Technologies' server and some mobile chips, and is used as the primary Ethernet interface. Systems that have these SOCs typically have an Atheros 803x or Marvell 88e1111 PHY in them, so enable those drivers too. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:47 +08:00
CONFIG_AT803X_PHY=m
CONFIG_MARVELL_PHY=m
arm64: defconfig: enable the Marvell 10G PHY as a module The Marvell 10G PHY is present on mvebu platforms. Enable it as a module so that the network works on these platforms. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-18 15:58:06 +08:00
CONFIG_MARVELL_10G_PHY=m
ARM64: configs: Activate Internal PHY for Meson GXL Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-14 17:42:50 +08:00
CONFIG_MESON_GXL_PHY=m
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_MICREL_PHY=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_REALTEK_PHY=m
arm64: defconfig: Enable CONFIG_ROCKCHIP_PHY Make the rockchip PHY driver built into the kernel. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 21:56:42 +08:00
CONFIG_ROCKCHIP_PHY=y
arm64: defconfig: enable several common USB network adapters The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:53 +08:00
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
arm64: defconfig: Enable LAN and BT support for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 19:28:41 +08:00
CONFIG_USB_LAN78XX=m
arm64: defconfig: enable several common USB network adapters The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:53 +08:00
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_BRCMFMAC=m
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver Enable the wireless network driver to support the WiFi adapter present in RK3399 Kevin Chromebooks. Note that this also enables Bluetooth via USB. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:01 +08:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_INPUT_EVDEV=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_KEYBOARD_ADC=m
ARM64: add GPIO keys to the defconfig The Juno board, and likely many other boards, likes to use simple GPIO keys for input events. Enabled this in the default ARM64 defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-04 19:41:41 +08:00
CONFIG_KEYBOARD_GPIO=y
arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M series SoCs' power key. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-21 13:06:03 +08:00
CONFIG_KEYBOARD_SNVS_PWRKEY=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_KEYBOARD_CROS_EC=y
arm64: defconfig: Enable Atmel Maxtouch driver Enable the Atmel Maxtouch driver to support the touchscreen and touchpad present in RK3399 Kevin Chromebooks. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:00 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
arm: defconfig: Enable PM8941 pwr key This patch enables the PM8941 pwr key driver. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-19 13:00:17 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:06 +08:00
CONFIG_INPUT_HISI_POWERKEY=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SERIO_SERPORT is not set
arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-10-04 21:22:23 +08:00
CONFIG_SERIO_AMBAKMI=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_LEGACY_PTY_COUNT=16
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
arm64: defconfig: enable ARCH_ROCKCHIP Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17 06:34:23 +08:00
CONFIG_SERIAL_8250_DW=y
arm64: defconfig: Enable SERIAL_8250_OMAP Enabling CONFIG_SERIAL_8250_OMAP that is used by TI's AM6 SoC. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:01:40 +08:00
CONFIG_SERIAL_8250_OMAP=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_SERIAL_8250_MT6577=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_SERIAL_8250_UNIPHIER=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_TEGRA=y
arm64: defconfig: Enable Tegra TCU The Tegra Combined UART is used on some Tegra194 devices as a way of multiplexing output from multiple producers onto a single physical UART. Enable this by default so that it can be used as the default console to write kernel messages to. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-11-28 17:54:21 +08:00
CONFIG_SERIAL_TEGRA_TCU=y
arm64: defconfig: Add i.MX8MQ boot necessary configs Enable all the i.MX8MQ configs necessary to boot. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-16 17:41:59 +08:00
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_SERIAL_SH_SCI=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_SERIAL_QCOM_GENI=y
CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_SERIAL_MVEBU_UART=y
arm64: defconfig: enable support for serial port connected device This patch enables these configs: +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y As example, a bluetooth device connected to UART port can be supported by this. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:26 +08:00
CONFIG_SERIAL_DEV_BUS=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_CONSOLE=y
arm64: defconfig: Enable some IPMI configs The arm64 port now runs on servers which use IPMI. This patch enables relevant core configs to save manually enabling them when testing mainline. Signed-off-by: John Garry <john.garry@huawei.com> [olof: Switched to =m instead of =y] Signed-off-by: Olof Johansson <olof@lixom.net>
2018-10-19 00:17:07 +08:00
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_CHARDEV=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_I2C_BCM2835=m
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
arm64: defconfig: Enable I2C_GPIO The GPIO-based bitbanging I2C driver is required to configure CSI data, clock pins on CSI block in Allwinner A64 SoC. Let build it as module. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-31 23:20:34 +08:00
CONFIG_I2C_GPIO=m
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_IMX=y
arm64: defconfig: Enable lpi2c for imx8qxp and sensors The current lpi2c driver can work on imx8 chips so lets enable it. Also enable few i2c peripherals found on imx8qxp-mek I2C (some were already used for other boards). Sensors enabled as modules because not required for boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21 15:36:25 +08:00
CONFIG_I2C_IMX_LPI2C=y
arm64: defconfig: enable meson I2C Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 01:21:45 +08:00
CONFIG_I2C_MESON=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_MV64XXX=y
arm64: defconfig: enable I2C_PXA Now that the Armada 37xx SoCs support the i2c pxa driver, enable it by default. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-23 01:31:46 +08:00
CONFIG_I2C_PXA=y
arm64: defconfig: Enable Qualcomm GENI based I2C controller Tested on the Lenovo Yoga C630 where this patch enables the keyboard, touchpad and touchscreen. Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 03:26:23 +08:00
CONFIG_I2C_QCOM_GENI=m
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_I2C_QUP=y
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:46:30 +08:00
CONFIG_I2C_RK3X=y
arm64: defconfig: Enable SH Mobile I2C controller Enable SH Mobile I2C controller for use on R-Car Gen3 SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-26 16:52:26 +08:00
CONFIG_I2C_SH_MOBILE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_TEGRA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_I2C_UNIPHIER_F=y
arm64: defconfig: Enable Renesas R-Car I2C Controller Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-18 10:07:18 +08:00
CONFIG_I2C_RCAR=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_I2C_CROS_EC_TUNNEL=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI=y
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700 The SPI is used on many boards (especially for the serial flashes). Enable it by default. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-04-06 22:00:48 +08:00
CONFIG_SPI_ARMADA_3700=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_SPI_NXP_FLEXSPI=y
arm64: defconfig: Enable CONFIG_SPI_IMX Enable the CONFIG_SPI_IMX option so that i.MX8M can use the imx spi driver by default. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-20 20:35:43 +08:00
CONFIG_SPI_IMX=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_SPI_ORION=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI_PL022=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_SPI_ROCKCHIP=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_SPI_QUP=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SPI_S3C64XX=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SPI_SPIDEV=m
arm64: defconfig: Enable SPI_SUN6I Enable SUN6I SPI controller for Allwinner ARM64 SoC's. This would helpful to setup spi flash, for another booting source. mark it as static since it require during boot. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-26 15:28:12 +08:00
CONFIG_SPI_SUN6I=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_SPMI=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_PINCTRL_SINGLE=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PINCTRL_MAX77620=y
arm64: defconfig: Enable imx8mm clk/pinctrl Basic imx8mm support is already available in linux-next just not enabled in arm64 defconfig. With this patch imx8mm-evk can boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11 16:46:13 +08:00
CONFIG_PINCTRL_IMX8MM=y
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default Enable CONFIG_PINCTRL_IMX8MN by default to support i.MX8MN pinctrl driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-11 20:25:35 +08:00
CONFIG_PINCTRL_IMX8MN=y
arm64: defconfig: Add i.MX8MQ boot necessary configs Enable all the i.MX8MQ configs necessary to boot. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-16 17:41:59 +08:00
CONFIG_PINCTRL_IMX8MQ=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_PINCTRL_IMX8QXP=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PINCTRL_IPQ8074=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_PINCTRL_MSM8916=y
arm64: configs: enable configs for msm899(2/4) basic support Given the mimimal hardware support for msm899(2/4) currently. A few config options are needed to allow for continued development and booting. The following are needed for continued development and booting: -8994 pinctrl for serial support -Enable Global Glock Controller (gcc) Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-05 04:56:34 +08:00
CONFIG_PINCTRL_MSM8994=y
arm64: defconfig: enable msm8996 pinctrl support This patch enables pinctrl support required to boot msm8996/apq8096 boards. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-17 23:18:02 +08:00
CONFIG_PINCTRL_MSM8996=y
arm64: defconfig: Enable GCC and PINCTRL for MSM8998 Enable the GCC and PINCTRL for MSM8998 to make upstream boot to console. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-30 14:54:56 +08:00
CONFIG_PINCTRL_MSM8998=y
arm64: defconfig: Enable QCS404 configs Enable GCC and pin control configs to make it possible to boot the QCS404 EVBs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09 17:58:02 +08:00
CONFIG_PINCTRL_QCS404=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_PINCTRL_QDF2XXX=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_PINCTRL_SDM845=y
arm64: defconfig: Enable SM8150 GCC and pinctrl driver Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-22 14:03:47 +08:00
CONFIG_PINCTRL_SM8150=y
arm64: defconfig: Enable DesignWare APB GPIO controller The Synopsys DesignWare APB GPIO controller is used by several vender's socs, like apm/marvell/altera/hisilicon, enable it by default. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-01-29 16:39:06 +08:00
CONFIG_GPIO_DWAPB=y
arm64: defconfig: add support for Socionext SynQuacer based platforms Enable support in arm64's defconfig for Socionext SynQuacer based platforms, by enabling the arch Kconfig symbol, and enabling builtin support for the ethernet, GPIO and SDHCI controllers Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-14 17:26:37 +08:00
CONFIG_GPIO_MB86S7X=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_PL061=y
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC Enable GPIO for Renesas R-Car Gen3 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-29 07:09:19 +08:00
CONFIG_GPIO_RCAR=y
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30 18:00:52 +08:00
CONFIG_GPIO_UNIPHIER=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_XGENE=y
arm64: xgene: defconfig: Enable Standby GPIO Enable CONFIG_GPIO_XGENE_SB. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07 05:35:58 +08:00
CONFIG_GPIO_XGENE_SB=y
arm64: defconfig: Enable lpi2c for imx8qxp and sensors The current lpi2c driver can work on imx8 chips so lets enable it. Also enable few i2c peripherals found on imx8qxp-mek I2C (some were already used for other boards). Sensors enabled as modules because not required for boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21 15:36:25 +08:00
CONFIG_GPIO_MAX732X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_MAX77620=y
arm64: defconfig: Enable Rockchip io-domain driver Heiko Stübner justified pretty well the change in commit e330eb86ba0b ("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This change is also needed for arm64 rockchip boards, so, do the same for arm64. The io-domain driver is necessary to notify the soc about voltages changes happening on supplying regulators. Probably the most important user right now is the mmc tuning code, where the soc needs to get notified when the voltage is dropped to the 1.8V point. As this option is necessary to successfully tune UHS cards etc, it should get built in. Otherwise, tuning will fail with, dwmmc_rockchip fe320000.dwmmc: All phases bad! mmc0: tuning execution failed: -5 Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:57 +08:00
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_POWER_RESET_MSM=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE Enable CONFIG_SYSCON_REBOOT_MODE Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:25 +08:00
CONFIG_SYSCON_REBOOT_MODE=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_BATTERY_SBS=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_ARM_SCPI=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_SENSORS_LM90=m
arm64: defconfig: Add PWM Fan support The Tegra194 Jetson AGX Xavier board includes a PWM based fan. Enable PWM fan support in the ARM64 defconfig to support the fan on this board. Please note that the device-tree PWM fan node is already present for this board. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-02-27 23:53:39 +08:00
CONFIG_SENSORS_PWM_FAN=m
arm64: defconfig: Enable RPi voltage sensor The patch enables the hwmon driver for the Raspberry Pi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-05-26 03:24:39 +08:00
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_SENSORS_INA2XX=m
arm64: defconfig: Add HWMON INA3221 support Tegra186 board under arm64 is using this device, according to its dts file. So this patch enables its driver with a "=m" as the other HWMON drivers. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-25 02:10:10 +08:00
CONFIG_SENSORS_INA3221=m
arm64: defconfig: enable common modules for power management Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-01 12:51:09 +08:00
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_THERMAL_EMULATION=y
arm64: defconfig: Enable CONFIG_QORIQ_THERMAL i.MX8MQ needs CONFIG_QORIQ_THERMAL for thermal support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-24 08:40:37 +08:00
CONFIG_QORIQ_THERMAL=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_ROCKCHIP_THERMAL=m
arm64: defconfig: Enable R-Car thermal driver Enable the R-Car thermal driver as a built-in. This seems safer than enabling as a module from the point of view of protecting equipment from overheating. This driver is used in conjunction with the R-Car V3M (r8a77970), E3 (r8a77990) and D3 (r8a77995) SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-02 17:51:54 +08:00
CONFIG_RCAR_THERMAL=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_RCAR_GEN3_THERMAL=y
arm64: defconfig: enable the Armada thermal driver This patch enables the Armada thermal driver to support thermal management on Marvell EBU Armada SoCs (7K,8K). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-14 22:58:59 +08:00
CONFIG_ARMADA_THERMAL=y
arm64: defconfig: Re-enable bcm2835-thermal driver The bcm2835-thermal driver was added with commit ac178e4280e6 ("ARM64: bcm2835: add thermal driver to default config"). Unfortunately this was accidentally dropped by commit eb1e6716cc9c ("arm64: defconfig: sync with savedefconfig"). So enable the driver again. Fixes: eb1e6716cc9c ("arm64: defconfig: sync with savedefconfig") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-29 00:53:23 +08:00
CONFIG_BCM2835_THERMAL=m
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL Turn on CONFIG_BRCMSTB_THERMAL as module. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-10 06:02:57 +08:00
CONFIG_BRCMSTB_THERMAL=m
arm64: defconfig: Enable exynos thermal config This patch enables Exynos thermal and related configs for the TMU found on Exynos7 SoC. This also enables thermal emulation mode to test trip points. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25 11:34:09 +08:00
CONFIG_EXYNOS_THERMAL=y
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL Enable Tegra BPMP thermal sensor support by default, built as a module. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-16 19:46:52 +08:00
CONFIG_TEGRA_BPMP_THERMAL=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_QCOM_TSENS=y
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 20:23:27 +08:00
CONFIG_UNIPHIER_THERMAL=y
arm64: defconfig: enable Renesas Watchdog Timer Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-04-01 19:56:26 +08:00
CONFIG_WATCHDOG=y
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG Enable the SP805 watchdog timer Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-29 02:01:37 +08:00
CONFIG_ARM_SP805_WATCHDOG=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_S3C2410_WATCHDOG=y
arm64: defconfig: Enable the DesignWare watchdog Enable the DesignWare watchdog driver that is present on the Intel Stratix10 and Agilex platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-08-16 06:52:00 +08:00
CONFIG_DW_WATCHDOG=y
arm64: defconfig: enable sunxi watchdog The SUNXI_WATCHDOG option is required to make the watchdog available on Allwinner H6. Enable this option as a module. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-23 23:10:50 +08:00
CONFIG_SUNXI_WATCHDOG=m
arm64: defconfig: Add IMX2+ watchdog It's needed to properly reboot the i.MX8MQ EVK board. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-06 22:37:37 +08:00
CONFIG_IMX2_WDT=y
arm64: defconfig: add support for i.MX system controller watchdog Enable CONFIG_IMX_SC_WDT as module to support i.MX system controller watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-21 10:26:57 +08:00
CONFIG_IMX_SC_WDT=m
arm64: defconfig: enable meson WDT as modules Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-03 08:13:01 +08:00
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RENESAS_WDT=y
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG Enable the watchdog driver for UniPhier SoC Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-18 14:38:10 +08:00
CONFIG_UNIPHIER_WATCHDOG=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_BCM2835_WDT=y
arm64: defconfig: Enable CONFIG_MTD_ALTERA_SYSMGR Enable the Stratix10 System Manager by default. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-03-12 06:18:06 +08:00
CONFIG_MFD_ALTERA_SYSMGR=y
arm64: defconfig: Enable BD9571MWV regulator The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car Starter Kit Premier/Pro development boards. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-23 21:35:31 +08:00
CONFIG_MFD_BD9571MWV=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_MFD_AXP20X_I2C=y
arm64: defconfig: Enable MFD_AXP20X_RSB The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). Enable the driver for this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: Refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-12 13:40:42 +08:00
CONFIG_MFD_AXP20X_RSB=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_CROS_EC=y
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks. Enable following drivers for merged devices: - ChromeOS EC RTC driver. - ChromeOS EC userspace interface. - ChromeOS EC light and proximity sensors. - ChromeOS EC Barometer Sensor driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:58 +08:00
CONFIG_MFD_CROS_EC_CHARDEV=m
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_MFD_EXYNOS_LPASS=m
arm64: defconfig: enable support hi6421v530 PMIC Enable configs for hi6421v530 mfd and regulator driver + CONFIG_MFD_HI6421_PMIC=y + CONFIG_REGULATOR_HI6421V530=y Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:24 +08:00
CONFIG_MFD_HI6421_PMIC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_HI655X_PMIC=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_MFD_MAX77620=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_MFD_SPMI_PMIC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_RK808=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_MFD_SEC_CORE=y
arm64: defconfig: Enable ROHM_BD718XX PMIC for imx8mm-evk Enable mfd and regulator driver for PMIC found on imx8mm-evk boards Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-12 22:10:04 +08:00
CONFIG_MFD_ROHM_BD718XX=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
arm64: defconfig: Enable REGULATOR_AXP20X The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). The regulators of this PMIC supply all power rails of the SoC and many external peripherals. Enable the driver for the regulators of this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-12 13:40:43 +08:00
CONFIG_REGULATOR_AXP20X=y
arm64: defconfig: Enable ROHM_BD718XX PMIC for imx8mm-evk Enable mfd and regulator driver for PMIC found on imx8mm-evk boards Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-12 22:10:04 +08:00
CONFIG_REGULATOR_BD718XX=y
arm64: defconfig: Enable BD9571MWV regulator The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car Starter Kit Premier/Pro development boards. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-23 21:35:31 +08:00
CONFIG_REGULATOR_BD9571MWV=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_REGULATOR_FAN53555=y
arm64: defconfig: Enable SDHI and GPIO_REGULATOR This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-31 05:09:59 +08:00
CONFIG_REGULATOR_GPIO=y
arm64: defconfig: enable support hi6421v530 PMIC Enable configs for hi6421v530 mfd and regulator driver + CONFIG_MFD_HI6421_PMIC=y + CONFIG_REGULATOR_HI6421V530=y Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:24 +08:00
CONFIG_REGULATOR_HI6421V530=y
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey This patch enables a number of devices currently supported by the Hi6220 and 96boards HiKey. These include a) Hi655x PMIC and regulator b) Hi6220 I2C, USB, MMC, mailbox, and reset c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO Since b) and c) are already in the 4.6-rc3, so kept a) only in this patch and updated subject as well. v2: - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in. - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:51 +08:00
CONFIG_REGULATOR_HI655X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_REGULATOR_MAX77620=y
arm64: defconfig: Enable MAX8973 regulator The Tegra210 Smaug board uses MAX77621 for both CPU & GPU rail. Note that max8973 and max77621 share the same driver. So enable this driver for the PMIC. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-04 11:07:02 +08:00
CONFIG_REGULATOR_MAX8973=y
arm64: defconfig: Enable PFUZE100 regulator This is needed to boot correctly from eMMC on the i.MX8MQ EVK board. Signed-off-by: Carlo Caione <ccaione@baylibre.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-02-06 22:02:41 +08:00
CONFIG_REGULATOR_PFUZE100=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_REGULATOR_PWM=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_REGULATOR_QCOM_RPMH=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_REGULATOR_QCOM_SMD_RPM=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_REGULATOR_QCOM_SPMI=y
arm64: defconfig: enable RK808 components Many rockchip based arm64 boards use RK808 as PMIC, so enabe it here let the board bootup normally. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [added rk808-rtc as module and rk808-clk output built in] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:50:28 +08:00
CONFIG_REGULATOR_RK808=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_REGULATOR_S2MPS11=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_REGULATOR_VCTRL=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_RC_CORE=m
CONFIG_RC_DECODERS=y
CONFIG_RC_DEVICES=y
CONFIG_IR_MESON=m
arm64: defconfig: Enable IR SUNXI option Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs can use their IR receiver controller. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-06-08 07:11:00 +08:00
CONFIG_IR_SUNXI=m
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_NET is not set
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_SUN6I_CSI=m
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_V4L_MEM2MEM_DRIVERS=y
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM=m
arm64: defconfig: Enable TDA19988 The EK874 board comes with a TDA19988 chip on board, therefore enable it in the defconfig. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-18 19:00:55 +08:00
CONFIG_DRM_I2C_NXP_TDA998X=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM_NOUVEAU=m
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS7_DECON=y
CONFIG_DRM_EXYNOS_DSI=y
# CONFIG_DRM_EXYNOS_DP is not set
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_DRM_RCAR_DU=m
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_DRM_SUN4I=m
CONFIG_DRM_SUN8I_DW_HDMI=m
CONFIG_DRM_SUN8I_MIXER=m
arm64: defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all ARCH_QCOM enabled defconfigs to restore the previous expected build behavior. I split this off from the original patch to separate out the ARM64 portions. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-08-13 22:46:25 +08:00
CONFIG_DRM_MSM=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_SIMPLE=m
arm64: defconfig: Switch to PL11x DRM driver This switches out the old fbdev PL11x driver to the new DRM driver in the Aarch64/ARM64 defconfig. Some ARM reference designs use this IP with the Silicon Image SII902x HDMI bridge so activate both. The required DTS changes are already in-tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-23 16:47:45 +08:00
CONFIG_DRM_SII902X=m
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:05 +08:00
CONFIG_DRM_I2C_ADV7511=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_DRM_VC4=m
arm64: defconfig: CONFIG_DRM_ETNAVIV=m For imx8 we want to enable etnaviv, let's enable it in defconfig, it will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-02 20:20:28 +08:00
CONFIG_DRM_ETNAVIV=m
arm64: defconfig: Enable hisilicon hibmc drm driver Enable DRM_HISI_HIBMC as module for Hisilicon D03/D05 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-22 21:20:56 +08:00
CONFIG_DRM_HISI_HIBMC=m
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:05 +08:00
CONFIG_DRM_HISI_KIRIN=m
ARM64: defconfig: enable DRM_MESON as module Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-12-09 08:56:23 +08:00
CONFIG_DRM_MESON=m
arm64: defconfig: Switch to PL11x DRM driver This switches out the old fbdev PL11x driver to the new DRM driver in the Aarch64/ARM64 defconfig. Some ARM reference designs use this IP with the Silicon Image SII902x HDMI bridge so activate both. The required DTS changes are already in-tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-23 16:47:45 +08:00
CONFIG_DRM_PL111=m
arm64: defconfig: enable Lima driver A bunch of arm64 boards can now use the Lima driver, let's enable it in defconfig, it will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-06 16:56:44 +08:00
CONFIG_DRM_LIMA=m
arm64: defconfig: add Panfrost driver With the goal of making it easier for CI services such as KernelCI to run tests for it. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-04 19:20:02 +08:00
CONFIG_DRM_PANFROST=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_FB=y
arm64: defconfig: Switch to PL11x DRM driver This switches out the old fbdev PL11x driver to the new DRM driver in the Aarch64/ARM64 defconfig. Some ARM reference designs use this IP with the Silicon Image SII902x HDMI bridge so activate both. The required DTS changes are already in-tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-23 16:47:45 +08:00
CONFIG_FB_MODE_HELPERS=y
arm64: defconfig: Enable the EFI Framebuffer Tested on the Lenovo Yoga C630 where this patch enables the framebuffer (screen/monitor). Without it the device appears not to boot. Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 03:26:24 +08:00
CONFIG_FB_EFI=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BACKLIGHT_GENERIC=m
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_BACKLIGHT_PWM=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BACKLIGHT_LP855X=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
arm64: defconfig: add Renesas sound and AK4613 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25 14:39:48 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
arm64: defconfig: Enable Tegra HDA support Enable support for Tegra HDA controller in the ARM64 defconfig which is used by Tegra210, Tegra186 and Tegra194. Please note that the Tegra HDA controller requires the HDA HDMI/DP codec driver and so enable this as well. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-08 00:46:48 +08:00
CONFIG_SND_HDA_TEGRA=m
CONFIG_SND_HDA_CODEC_HDMI=m
arm64: defconfig: add Renesas sound and AK4613 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25 14:39:48 +08:00
CONFIG_SND_SOC=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SND_BCM2835_SOC_I2S=m
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_SND_MESON_AXG_SOUND_CARD=m
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SND_SOC_SAMSUNG=y
arm64: defconfig: compile ak4613 and renesas sound as modules Compile the renesas sound and ak4613 drivers as modules to reduce the ARM64 kernel size. These modules are currently only used by Renesas platforms so there should little risk of negative impact of this change on other users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [simon: consolidated two patches into one] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-19 08:23:59 +08:00
CONFIG_SND_SOC_RCAR=m
arm64: defconfig: Enable Sun4i SPDIF module Allwinner A64 and H6 use the Sun4i SPDIF driver. Enable this to allow a proper support. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-12 04:31:44 +08:00
CONFIG_SND_SUN4I_SPDIF=m
arm64: defconfig: compile ak4613 and renesas sound as modules Compile the renesas sound and ak4613 drivers as modules to reduce the ARM64 kernel size. These modules are currently only used by Renesas platforms so there should little risk of negative impact of this change on other users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [simon: consolidated two patches into one] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-19 08:23:59 +08:00
CONFIG_SND_SOC_AK4613=m
arm64: defconfig: enable modules for amlogic s400 sound card Compile the necessary drivers as modules, including codecs, for the s400 sound card. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-28 20:27:35 +08:00
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_SND_SOC_PCM3168A_I2C=m
arm64: defconfig: enable modules for amlogic s400 sound card Compile the necessary drivers as modules, including codecs, for the s400 sound card. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-28 20:27:35 +08:00
CONFIG_SND_SOC_TAS571X=m
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_AUDIO_GRAPH_CARD=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_I2C_HID=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_OTG=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_USB_XHCI_HCD=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_USB_XHCI_TEGRA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_EHCI_EXYNOS=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_OHCI_EXYNOS=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_OHCI_HCD_PLATFORM=y
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-21 18:47:01 +08:00
CONFIG_USB_RENESAS_USBHS=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB_STORAGE=y
arm64: defconfig: enable MUSB HDRC along with Allwinner glue Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role controller for USB OTG. This is need for verifying gadget functions, so enable them by default. Tested 'otg' mode with mass storage function. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 01:49:58 +08:00
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_USB_DWC3=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_DWC2=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_USB_ISP1760=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_HSIC_USB3503=y
arm64: defconfig: enable nop-xceiv PHY driver This commit enables the nop-xceiv PHY driver, which is needed for USB support to work on the MacchiatoBin platform (Marvell Armada 8K). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-23 23:40:14 +08:00
CONFIG_NOP_USB_XCEIV=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_ULPI=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_GADGET=y
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-21 18:47:01 +08:00
CONFIG_USB_RENESAS_USBHS_UDC=m
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_USB_RENESAS_USB3=m
arm64: defconfig: enable TYPEC_HD3SS3220 config option Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-31 17:59:58 +08:00
CONFIG_TYPEC=m
CONFIG_TYPEC_HD3SS3220=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_BLOCK_MINORS=32
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC_ARMMMCI=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SDHCI=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_MMC_SDHCI_ACPI=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SDHCI_PLTFM=y
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_MMC_SDHCI_OF_ARASAN=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_MMC_SDHCI_OF_ESDHC=y
arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE Enable the Cadence SD/SDIO/eMMC controller. This is used on Socionext UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-26 10:14:53 +08:00
CONFIG_MMC_SDHCI_CADENCE=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_MMC_SDHCI_ESDHC_IMX=y
arm64: defconfig: Enable sdhci-tegra driver This driver is used to service the SDHCI interfaces found on NVIDIA tegra SoCs. Enabling it allows SD and eMMC cards to be used for the root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:41:22 +08:00
CONFIG_MMC_SDHCI_TEGRA=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_MMC_SDHCI_F_SDH30=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MMC_MESON_GX=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_MMC_SDHCI_MSM=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SPI=y
arm64: defconfig: Enable SDHI and GPIO_REGULATOR This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-31 05:09:59 +08:00
CONFIG_MMC_SDHI=y
arm64: defconfig: enable CONFIG_MMC_UNIPHIER Enable the UniPhier SD controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-03 08:18:23 +08:00
CONFIG_MMC_UNIPHIER=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_MMC_DW_HI3798CV200=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_DW_K3=y
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:46:30 +08:00
CONFIG_MMC_DW_ROCKCHIP=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_SUNXI=y
arm64: set CONFIG_MMC_BCM2835=y in defconfig We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-08 17:19:09 +08:00
CONFIG_MMC_BCM2835=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MMC_SDHCI_XENON=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_LEDS_GPIO=y
ARM64: defconfig: enable the leds-pwm driver and default-on trigger This enables the leds-pwm driver to support LEDs which are PWM-powered (and thus dimmable). Additionally we have to enable the "default-on" trigger - this was not required before because the gpio-leds driver has a separate "default-state" property which can be used to enable the LED by default. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-02-20 06:23:25 +08:00
CONFIG_LEDS_PWM=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_LEDS_SYSCON=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_LEDS_TRIGGER_DISK=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
arm64: defconfig: enable new trigger modes for leds Most development boards and devices have one or more LEDs. It is useful during debugging if they can be wired to show different behaviours such as disk or cpu activity or a load-average dependent heartbeat. Enable panic and disk activity triggers so they can be tied to LED activity during debugging as well. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-06 15:08:13 +08:00
CONFIG_LEDS_TRIGGER_PANIC=y
arm64: defconfig: enable EDAC options Enable EDAC (Error Detection and Correction) support for ARM64 server systems that feature it, so that user space applications can be notified of memory errors. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:45 +08:00
CONFIG_EDAC=y
arm64: defconfig: enable EDAC GHES option Enable CONFIG_EDAC_GHES option for ARM64,so that the memory errors are processed and reported to the user space. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-16 23:45:22 +08:00
CONFIG_EDAC_GHES=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_CLASS=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_MAX77686=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RTC_DRV_RK808=m
arm64: defconfig: enable RX-8581 config option Enable support for RX-8571/RX-8581 RTC by turning on CONFIG_RTC_DRV_RX8581 as module. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-21 17:40:47 +08:00
CONFIG_RTC_DRV_RX8581=m
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_RTC_DRV_S5M=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_RTC_DRV_DS3232=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_EFI=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_RTC_DRV_CROS_EC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RTC_DRV_S3C=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RTC_DRV_PL031=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_RTC_DRV_SUN6I=y
arm64: defconfig: enable RTC on Armada 7K/8K SoCs The Armada 38x RTC driver supports also the RTC controller found on the Armada 7K/8K SoCs, so enable it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-10-02 23:44:16 +08:00
CONFIG_RTC_DRV_ARMADA38X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_TEGRA=y
arm64: defconfig: Enable RTC_DRV_SNVS i.MX8MQ needs it for RTC support. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-09 02:53:03 +08:00
CONFIG_RTC_DRV_SNVS=m
arm64: defconfig: add i.MX system controller RTC support This patch enables CONFIG_RTC_DRV_IMX_SC as module by default. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-20 16:56:25 +08:00
CONFIG_RTC_DRV_IMX_SC=m
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_XGENE=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_DMADEVICES=y
arm64: defconfig: Enable FSL_EDMA driver Enables the FSL EDMA driver by default. This also works around an issue that imx-i2c driver keeps deferring the probe because of the DMA is not ready. And currently the DMA engine framework can not correctly tell if the DMA channels will truly become available later (it will never be available if the DMA driver is not enabled). This will cause indefinite messages like below: [ 3.335829] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported [ 3.344455] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm) [ 3.350917] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 3.362089] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported [ 3.370741] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm) [ 3.377205] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 3.388455] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported ..... Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-23 02:30:56 +08:00
CONFIG_FSL_EDMA=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_DMA_BCM2835=m
arm64: defconfig: enable Allwinner DMA drivers Allwinner sun6i DMA drivers is used on A64 and H6 boards. Enable it as a module. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-28 04:14:59 +08:00
CONFIG_DMA_SUN6I=m
arm64: defconfig: Enable SDMA on i.mx8mq/8mm Enable SDMA support on i.mx8mq/8mm chips, including enabling CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK for firmware loaded by udev. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-17 14:47:10 +08:00
CONFIG_IMX_SDMA=y
arm64: defconfig: enable DMA driver for hi3660 enable DMA driver for hi3660. Signed-off-by: Wang Ruyi <wangruyi@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:28 +08:00
CONFIG_K3_DMA=y
arm64: defconfig: enable mv-xor driver The mv-xor DMA driver is used for the XOR engine found in the ARM64 Marvell Armada 3720 SoC, so it makes sense to have it enabled in the arm64 defconfig. A recent boot-time regression was found in mv-xor, which would have been more easily noticed with this driver enabled by default. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: John David Anglin <dave.anglin@bell.net> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-02-20 17:30:24 +08:00
CONFIG_MV_XOR=y
arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K This commit enables the XORv2 DMA driver, which is used on the ARM64 Marvell Armada 7K and 8K platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-12-22 23:24:18 +08:00
CONFIG_MV_XOR_V2=y
arm64: defconfig: Enable PL330 DMA controller This patch enables PL330 DMA controller found on exynos7 SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-12 20:50:58 +08:00
CONFIG_PL330_DMA=y
arm64: defconfig: Enable tegra-apbdma driver This driver enables the use of the DMA engine from several of the peripherals found on NVIDIA Tegra SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:42:57 +08:00
CONFIG_TEGRA20_APB_DMA=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_QCOM_BAM_DMA=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RCAR_DMAC=y
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_RENESAS_USB_DMAC=m
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_VIRTIO_PCI=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_BALLOON=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_MMIO=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_SPI=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_COMMON_CLK_RK808=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_COMMON_CLK_SCPI=y
arm64: defconfig: add CS2000 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01 13:36:57 +08:00
CONFIG_COMMON_CLK_CS2000_CP=y
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver The S3C RTC controller on Exynos7 platform uses RTC source clock from S2MPS11 PMIC. This patch enables the required drivers to make RTC work on Exynos7 Espresso board. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05 18:06:51 +08:00
CONFIG_COMMON_CLK_S2MPS11=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_CLK_QORIQ=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_COMMON_CLK_PWM=y
arm64: defconfig: enable cpufreq support for RPi3 This enables both the new firmware clock driver and cpufreq driver available for the RPi3 family of boards. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-06-13 02:24:59 +08:00
CONFIG_CLK_RASPBERRYPI=m
arm64: defconfig: Enable imx8mm clk/pinctrl Basic imx8mm support is already available in linux-next just not enabled in arm64 defconfig. With this patch imx8mm-evk can boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11 16:46:13 +08:00
CONFIG_CLK_IMX8MM=y
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default Enable CONFIG_CLK_IMX8MN to support i.MX8MN clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-19 13:52:47 +08:00
CONFIG_CLK_IMX8MN=y
arm64: defconfig: Add i.MX8MQ boot necessary configs Enable all the i.MX8MQ configs necessary to boot. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-16 17:41:59 +08:00
CONFIG_CLK_IMX8MQ=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_CLK_IMX8QXP=y
arm64: defconfig: Enable TI_SCI related configs Enable TI System Control Interface (TI_SCI) Message Protocol library and it's relevant power management drivers using this library. TI's AM6 SoC uses this TI_SCI library to communicate to its system controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver using which this communication happens. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:03:30 +08:00
CONFIG_TI_SCI_CLK=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_COMMON_CLK_QCOM=y
arm64: defconfig: Enable CPU clock drivers for Qualcomm msm8916 QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the 'default ARCH_QCOM' directive. Add the two options explicitly in the arm64 defconfig, to avoid functional regressions. Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [bjorn: Rewrote subject] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-24 21:26:05 +08:00
CONFIG_QCOM_A53PLL=y
CONFIG_QCOM_CLK_APCS_MSM8916=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_QCOM_CLK_SMD_RPM=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_QCOM_CLK_RPMH=y
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl These configs are required for booting kernel in QCOM IPQ8074 boards. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-05-04 19:54:01 +08:00
CONFIG_IPQ_GCC_8074=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_MSM_GCC_8916=y
arm64: configs: enable configs for msm899(2/4) basic support Given the mimimal hardware support for msm899(2/4) currently. A few config options are needed to allow for continued development and booting. The following are needed for continued development and booting: -8994 pinctrl for serial support -Enable Global Glock Controller (gcc) Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-05 04:56:34 +08:00
CONFIG_MSM_GCC_8994=y
arm64: defconfig: Enable qcom msm8996 clk drivers Enable the clk drivers on msm8996. This allows us to boot and test most device drivers on this SoC. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-16 09:07:51 +08:00
CONFIG_MSM_MMCC_8996=y
arm64: defconfig: Enable GCC and PINCTRL for MSM8998 Enable the GCC and PINCTRL for MSM8998 to make upstream boot to console. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-30 14:54:56 +08:00
CONFIG_MSM_GCC_8998=y
arm64: defconfig: Enable QCS404 configs Enable GCC and pin control configs to make it possible to boot the QCS404 EVBs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09 17:58:02 +08:00
CONFIG_QCS_GCC_404=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_SDM_GCC_845=y
arm64: defconfig: Enable SM8150 GCC and pinctrl driver Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-22 14:03:47 +08:00
CONFIG_SM_GCC_8150=y
arm64: defconfig: enable missing HWSPINLOCK The hardware spinlock drivers now depend on HWSPINLOCK (instead of selecting it), so we need to explicitly enable it after commit 35fc8a07d7f9 ("Make HWSPINLOCK a menuconfig to ease disabling") Without HWSPINLOCK, various drivers are left with unsatisfied dependencies and Qcom boards using shared memory based communication to request regulators are failing to boot and mount rootfs. Fix this by explicitly enabling HWSPINLOCK in defconfig. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-07-19 20:55:13 +08:00
CONFIG_HWSPINLOCK=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_HWSPINLOCK_QCOM=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_MHU=y
arm64: defconfig: add imx8qxp support Enable basic drivers for imx8qxp booting up support: SCU firmware, Mailbox(MU), SCU Power Domain/Pinctrl/Clock, Uart, MMC, FEC. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-14 11:22:21 +08:00
CONFIG_IMX_MBOX=y
ARM64: configs: Add Platform MHU in defconfig Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-03 17:11:24 +08:00
CONFIG_PLATFORM_MHU=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_BCM2835_MBOX=y
arm64: defconfig: Enable TI_SCI related configs Enable TI System Control Interface (TI_SCI) Message Protocol library and it's relevant power management drivers using this library. TI's AM6 SoC uses this TI_SCI library to communicate to its system controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver using which this communication happens. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:03:30 +08:00
CONFIG_TI_MESSAGE_MANAGER=y
arm64: defconfig: Enable the APCS IPC driver on Qualcomm platforms The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the 8916 it is needed to enable the clock controller that in turn enables cpufreq on the platform while on the 8996 it is needed for communication with RPM. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-02-12 19:03:32 +08:00
CONFIG_QCOM_APCS_IPC=y
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_ROCKCHIP_IOMMU=y
arm64: defconfig: Enable the Tegra SMMU by default Display and graphics can't work together without an SMMU, so it is effectively always getting enabled anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14 19:10:14 +08:00
CONFIG_TEGRA_IOMMU_SMMU=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARM_SMMU=y
arm64: defconfig: enable SMMUv3 config Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-09 19:50:46 +08:00
CONFIG_ARM_SMMU_V3=y
arm64: defconfig: Enable QCOM_IOMMU Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the Dragonboard 410c. With this change, graphics console and GPU are working fine (using mesa/freedreno for GPU driver). Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-11 23:19:25 +08:00
CONFIG_QCOM_IOMMU=y
arm64: defconfig: Enable some qcom remoteproc configs Enable remoteproc configs to boot the remoteprocs on QC chipsets. These are common configs and not specific to a specific SoC so should be enabled across the board. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09 17:58:03 +08:00
CONFIG_REMOTEPROC=m
CONFIG_QCOM_Q6V5_MSS=m
CONFIG_QCOM_Q6V5_PAS=m
CONFIG_QCOM_SYSMON=m
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_RPMSG_QCOM_GLINK_RPM=y
arm64: defconfig: Enable some qcom remoteproc configs Enable remoteproc configs to boot the remoteprocs on QC chipsets. These are common configs and not specific to a specific SoC so should be enabled across the board. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-09 17:58:03 +08:00
CONFIG_RPMSG_QCOM_GLINK_SMEM=m
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_RPMSG_QCOM_SMD=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_RASPBERRYPI_POWER=y
arm64: defconfig: Add i.MX SCU SoC info driver This patch selects CONFIG_IMX_SCU_SOC by default to support i.MX system controller unit SoC info driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-24 09:52:43 +08:00
CONFIG_IMX_SCU_SOC=y
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_QCOM_GLINK_SSR=m
arm64: defconfig: Enable core Qualcomm SDM845 options Enable a few core config options to be able to boot SDM845 MTP. The GCC, PINCTRL and GENI options are required to be able to boot to a console. Several clocks from GCC are parented by the "bi_tcxo" clock from the RPMH clock driver, so enable this to save others the time to debug the missing parent clocks later. RPMH depends on the COMMAND_DB. While we're enabling the others let's do RPMH regulators as well, as everything beyond this point depends on that. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-03 05:53:03 +08:00
CONFIG_QCOM_RPMH=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_QCOM_SMEM=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_ARCH_R8A774A1=y
CONFIG_ARCH_R8A774C0=y
CONFIG_ARCH_R8A7795=y
CONFIG_ARCH_R8A7796=y
CONFIG_ARCH_R8A77965=y
CONFIG_ARCH_R8A77970=y
CONFIG_ARCH_R8A77980=y
CONFIG_ARCH_R8A77990=y
CONFIG_ARCH_R8A77995=y
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_ROCKCHIP_PM_DOMAINS=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
arm64: defconfig: Enable Tegra186 SoC Enable Tegra186 SoC. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-07-05 17:04:28 +08:00
CONFIG_ARCH_TEGRA_186_SOC=y
arm64: defconfig: Enable NVIDIA Tegra194 support Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-02-20 19:58:07 +08:00
CONFIG_ARCH_TEGRA_194_SOC=y
arm64: defconfig: Enable TI's AM6 SoC platform Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28 08:46:50 +08:00
CONFIG_ARCH_K3_AM6_SOC=y
arm64: defconfig: Enable TI's J721E SoC platform Enable J721E SoC support from TI. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-05-23 00:19:21 +08:00
CONFIG_ARCH_K3_J721E_SOC=y
arm64: defconfig: Enable TI's AM6 SoC platform Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28 08:46:50 +08:00
CONFIG_SOC_TI=y
arm64: defconfig: Enable TI_SCI related configs Enable TI System Control Interface (TI_SCI) Message Protocol library and it's relevant power management drivers using this library. TI's AM6 SoC uses this TI_SCI library to communicate to its system controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver using which this communication happens. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:03:30 +08:00
CONFIG_TI_SCI_PM_DOMAINS=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_EXTCON_USB_GPIO=y
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399 Enables typec phyter and extcon driver for cable detection that is used by USB 3.0 controller for Rockchip rk3399 SoCs. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:56 +08:00
CONFIG_EXTCON_USBC_CROS_EC=y
arm64: defconfig: Enable the Tegra SMMU by default Display and graphics can't work together without an SMMU, so it is effectively always getting enabled anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14 19:10:14 +08:00
CONFIG_MEMORY=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_ROCKCHIP_SARADC=m
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks. Enable following drivers for merged devices: - ChromeOS EC RTC driver. - ChromeOS EC userspace interface. - ChromeOS EC light and proximity sensors. - ChromeOS EC Barometer Sensor driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:58 +08:00
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
arm64: defconfig: Enable lpi2c for imx8qxp and sensors The current lpi2c driver can work on imx8 chips so lets enable it. Also enable few i2c peripherals found on imx8qxp-mek I2C (some were already used for other boards). Sensors enabled as modules because not required for boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21 15:36:25 +08:00
CONFIG_SENSORS_ISL29018=m
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks. Enable following drivers for merged devices: - ChromeOS EC RTC driver. - ChromeOS EC userspace interface. - ChromeOS EC light and proximity sensors. - ChromeOS EC Barometer Sensor driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:58 +08:00
CONFIG_IIO_CROS_EC_BARO=m
arm64: defconfig: Enable lpi2c for imx8qxp and sensors The current lpi2c driver can work on imx8 chips so lets enable it. Also enable few i2c peripherals found on imx8qxp-mek I2C (some were already used for other boards). Sensors enabled as modules because not required for boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-21 15:36:25 +08:00
CONFIG_MPL3115=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PWM=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_PWM_BCM2835=m
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_PWM_CROS_EC=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PWM_MESON=m
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_PWM_RCAR=m
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_PWM_ROCKCHIP=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PWM_SAMSUNG=y
arm64: defconfig: Enable PWM_SUN4I Allwinner PWM support need for ARM64 Allwinner SoC's which used pwms, builds it as module. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-13 20:15:35 +08:00
CONFIG_PWM_SUN4I=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PWM_TEGRA=m
arm64: defconfig: Enable TI_SCI related configs Enable TI System Control Interface (TI_SCI) Message Protocol library and it's relevant power management drivers using this library. TI's AM6 SoC uses this TI_SCI library to communicate to its system controller(DMSC). While at it, enable TI_MESSAGE_MANAGER mailbox driver using which this communication happens. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-05 18:03:30 +08:00
CONFIG_RESET_TI_SCI=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_XGENE=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_HI6220_USB=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
arm64: defconfig: enable Marvell CP110 comphy The comphy is an hardware block giving access to common PHYs that can be used by various other engines (Network, SATA, ...). This is used on Marvell 7k/8k platforms for now. Enable the corresponding driver. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-18 15:58:07 +08:00
CONFIG_PHY_MVEBU_CP110_COMPHY=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_PHY_QCOM_QMP=m
arm64: defconfig: Enable Qualcomm QUSB2 PHY Tested on the Lenovo Yoga C630 where this patch enables USB. Without it USB devices are not enumerated. Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04 03:26:25 +08:00
CONFIG_PHY_QCOM_QUSB2=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_QCOM_USB_HS=y
arm64: defconfig: Enable CONFIG_PHY_RCAR_GEN3_PCIE Enable R-Car Gen3 PCIe PHY support, which is needed for PCIe to function on the Renesas Condor board. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-13 23:22:01 +08:00
CONFIG_PHY_RCAR_GEN3_PCIE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_PHY_ROCKCHIP_EMMC=y
arm64: defconfig: enable Rockchip Innosilicon hdmiphy The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon. So enable the necessary driver as module. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-29 23:01:03 +08:00
CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_PHY_ROCKCHIP_PCIE=m
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399 Enables typec phyter and extcon driver for cable detection that is used by USB 3.0 controller for Rockchip rk3399 SoCs. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:56 +08:00
CONFIG_PHY_ROCKCHIP_TYPEC=y
arm64: defconfig: Enable USB phys for UniPhier SoCs Enable the USB3 and USB2 phys implemented in UniPhier SoCs. These phys are necessary for dwc3 and ehci controllers driving the USB ports on arm64 UniPhier SoCs. Since the USB host drivers are already built-in, so only the phy driver are missing to allow booting with USB devices. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-10-01 16:10:45 +08:00
CONFIG_PHY_UNIPHIER_USB2=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_PHY_UNIPHIER_USB3=y
CONFIG_PHY_TEGRA_XUSB=y
arm64: defconfig: Build imx8 ddr pmu as module This is available on all imx8 but is not "boot critical" in any way so build as a module. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-04 16:53:22 +08:00
CONFIG_FSL_IMX8_DDR_PMU=m
arm64: defconfig: enable HiSilicon PMU driver Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-06-27 10:49:46 +08:00
CONFIG_HISI_PMU=y
arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU Now that the drivers are available, enable support for L2 and L3 performance monitoring Qualcomm Datacenter Technologies Centriq SoCs. These PMU drivers provide support for performance optimization. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:46 +08:00
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
arm64: defconfig: add allwinner sid support Sid contains speedbin information and temperature sensor calibration information and more, which are important for SOC. This patch enables CONFIG_NVMEM_SUNXI_SID by default. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-12 16:26:12 +08:00
CONFIG_NVMEM_SUNXI_SID=y
arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m Enable imx-ocotp nvmem driver for fuse access on imx8m family. The fuse block stores various system information which will be accessed by client device drivers, e.g. cpufreq driver needs to access fuse for CPU speed grading setting. So this nvmem driver gets enabled as built-in. Tested on imx8mm-evk. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-22 10:33:53 +08:00
CONFIG_NVMEM_IMX_OCOTP=y
defconfig: arm64: enable i.MX8 SCU octop driver Build in CONFIG_NVMEM_IMX_OCOTP_SCU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Olof Johansson <olof@lixom.net> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-24 14:39:12 +08:00
CONFIG_NVMEM_IMX_OCOTP_SCU=y
arm64: defconfig: enable thermal sensor on QCOM platforms Enable the driver for the TSENS IP that is present across several QCOM SoCs. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-06 21:05:02 +08:00
CONFIG_QCOM_QFPROM=y
arm64: defconfig: enable rockchip efuse The efuses on Rockchip socs often contain informations about specifics of the chip its running on (leakage currents etc) which components might want to read to adjust settings accordingly. So enable the efuse early for that. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-29 22:57:59 +08:00
CONFIG_ROCKCHIP_EFUSE=y
arm64: defconfig: enable CONFIG_UNIPHIER_EFUSE Enable the efuse driver for UniPhier SoC Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-30 09:26:55 +08:00
CONFIG_UNIPHIER_EFUSE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_MESON_EFUSE=m
arm64: defconfig: enable fpga and service layer Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10 service layer, and Altera Freeze Bridge drivers. Intel Stratix10 service layer driver was added with commit 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver"). Intel Stratix10 service layer provides kernel APIs for drivers to request access to the secure features. Such features include FPGA programming, remote status update, and read and write secure registers. While clients of the service layer can be built as modules, the service layer itself has to be configured as built-in. The service layer is dependent on ARCH_STRATIX10. Enabling Altera Freeze Bridge depends on commit 38cd7ad5bd25 ("fpga: altera_freeze_bridge: remove restriction to socfpga"). Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-29 00:18:42 +08:00
CONFIG_FPGA=y
CONFIG_FPGA_MGR_STRATIX10_SOC=m
CONFIG_FPGA_BRIDGE=m
CONFIG_ALTERA_FREEZE_BRIDGE=m
CONFIG_FPGA_REGION=m
CONFIG_OF_FPGA_REGION=m
arm64: defconfig: enable OP-TEE This patch enables configs for Trusted Execution Environment (TEE) and OP-TEE. +CONFIG_TEE=y +CONFIG_OPTEE=y Signed-off-by: Victor Chong <victor.chong@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:27 +08:00
CONFIG_TEE=y
CONFIG_OPTEE=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
CONFIG_QUOTA=y
CONFIG_AUTOFS4_FS=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_VFAT_FS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_HUGETLBFS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CONFIGFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_EFIVAR_FS=y
arm64: defconfig: Enable squashfs support squashfs can be a convenient way to use a root filesystem stored as a file on some other root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:44:26 +08:00
CONFIG_SQUASHFS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_NFS_V4=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_ROOT_NFS=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_9P_FS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
arm64: defconfig: Regenerate for v4.20 Run the platform defconfig through kbuild, and handle the trivial case where options merely move around. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [olof: refreshed due to some recent churn] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-09 08:56:44 +08:00
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
arm64: defconfig: enable PCIE_ALTERA Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI. Also do a make savedefconfig to clean up. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-03-28 22:58:16 +08:00
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=32
arm64: defconfig: Enable printk timestamps Timestamps in the kernel log can be useful to quickly determine where time is spent during boot. There are tools that can generate charts of the boot time, but it's sometimes convenient to see this live and without the need to go through scripts to parse the logs first. Also, this option is enabled on a large number of configurations, not enabling it is confusing because the boot log looks very different from what one is used to. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:45:36 +08:00
CONFIG_PRINTK_TIME=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_DEBUG_INFO=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_FS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_MAGIC_SYSRQ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
# CONFIG_DEBUG_PREEMPT is not set
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_FTRACE is not set
arm64: defconfig: enable memtest The kernel memtest utility is incredibly useful for detecting memory problems, but sadly isn't in defconfig. The memtest itself is only run when the user has explicitly passed a memtest option on the kernel command line, so simply enabling the option should not have a negative impact. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-15 22:02:44 +08:00
CONFIG_MEMTEST=y