openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm64/configs/defconfig

714 lines
16 KiB
Plaintext
Raw Normal View History

arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
arm64: defconfig: enable fine-grained task level IRQ time accounting Tests showed, that under certain conditions, the summary number of jiffies spent on softirq/idle, which are counted by system statistics can be even below 10% of expected value, resulting in false load presentation. The issue was observed on the quad-core Marvell Armada 8k SoC, whose two 10G ports were bound into L2 bridge. Load was controlled by bidirectional UDP traffic, produced by a packet generator. Under such condition, the dominant load is softirq. With 100% single CPU occupation or without any activity (all CPUs 100% idle), total number of jiffies is 10000 (2500 per each core) in 10s interval. Also with other kind of load this was true. However below a saturation threshold it was observed, that with CPU which was occupied almost by softirqs only, the statistic were awkward. See the mpstat output: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle all 0.00 0.00 0.13 0.00 0.00 0.55 0.00 0.00 0.00 99.32 0 0.00 0.00 0.00 0.00 0.00 23.08 0.00 0.00 0.00 76.92 1 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 99.60 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 3 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Above would mean basically no total load, debug CPU0 occupied in 25%. Raw statistics, printed every 10s from /proc/stat unveiled a root cause - summary idle/softirq jiffies on loaded CPU were below 200, i.e. over 90% samples lost. All problems were gone after enabling fine granulity IRQ time accounting. This patch fixes possible wrong statistics processing by enabling CONFIG_IRQ_TIME_ACCOUNTING for arm64 platfroms, which is by default done on other architectures, e.g. x86 and arm. Tests showed no noticeable performance penalty, nor stability impact. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-01 04:22:11 +08:00
CONFIG_IRQ_TIME_ACCOUNTING=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
arm64: defconfig: Enable NUMA and NUMA_BALANCING Since much more arm64 SoCs with numa nodes, it's better to enable NUMA and NUMA_BALANCING to improve the performance on test. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-18 13:57:19 +08:00
CONFIG_NUMA_BALANCING=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_PIDS=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_CGROUP_HUGETLB=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_USER_NS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_JUMP_LABEL=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_ARCH_SUNXI=y
arm64: defconfig: enable the Alpine family Enable the Alpine SoC family in the arm64 defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-25 18:14:53 +08:00
CONFIG_ARCH_ALPINE=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_ARCH_BCM2835=y
arm64: Add Broadcom iProc family support This patch adds support to Broadcom's iProc family of arm64 based SoCs in the arm64 Kconfig and defconfig files Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 06:42:20 +08:00
CONFIG_ARCH_BCM_IPROC=y
arm64: Enable Marvell Berlin SoC family in defconfig Enable Marvell Berlin SoC family in arm64 defconfig. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-04 03:24:46 +08:00
CONFIG_ARCH_BERLIN=y
arm64: defconfig: Enable ARCH_BRCMSTB ARCH_BRCMSTB was one of the few platforms that were not enabled by default, since we are now adding more and more drivers relevant to that platform get some proper build coverage. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-06-08 00:56:33 +08:00
CONFIG_ARCH_BRCMSTB=y
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS The ARMv8 Exynos family SoCs in Linux kernel are currently: - Exynos5433 (controlled by ARCH_EXYNOS), - Exynos7 (controlled by ARCH_EXYNOS7). It duplicates Kconfig symbols unnecessarily, so consolidate them into one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS symbol. The commit should not bring any visible functional change. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
2015-11-16 09:09:13 +08:00
CONFIG_ARCH_EXYNOS=y
arm64: defconfig: Enable TI's AM6 SoC platform Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28 08:46:50 +08:00
CONFIG_ARCH_K3=y
arm64: Use generic Layerscape SoC family naming Freescale will be a spinning-out a set of ARMv8 based SoCs which will be based on a similar overall SoC architecture. So, this patch converts the existing infrastructure in the arm64/dts, arm64/Kconfig and arm64/configs to use the generic convention ARCH_LAYERSCAPE in place of the more specific FSL_LS2085A, to save code duplication later-on. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-24 03:31:50 +08:00
CONFIG_ARCH_LAYERSCAPE=y
arm64: defconfig: enable ARCH_LG1K Enable building LG1K support in the defconfig. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-11 19:54:45 +08:00
CONFIG_ARCH_LG1K=y
arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig This patch introduces ARCH_HISI to enable Hisilicon SoC family in Kconfig and defconfig. Signed-off-by: Bintian Wang <bintian.wang@huawei.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Wei Xu <xuwei5@hisilicon.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2015-01-06 09:30:36 +08:00
CONFIG_ARCH_HISI=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_ARCH_MEDIATEK=y
arm64: defconfig: enable basic boot for Amlogic meson Enables basic arch and serial console support for Amlogic meson family SoCs. Tested with Amlogic P200 and Hardkernel ODROID-C2 boards. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-03-24 02:49:53 +08:00
CONFIG_ARCH_MESON=y
mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEUEABECAAYFAlbElN0ACgkQCwYYjhRyO9XkzgCfaYJggCHzsLpMvnTK1bMNgPCY jYkAmOIRjMJskq40RBXSXpyoJboqyZs= =tAva -----END PGP SIGNATURE----- Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into next/arm64 mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) * tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable Armada 3700 related config Documentation: arm: update supported Marvell EBU processors MAINTAINERS: Extend dts entry for ARM64 mvebu files arm64: add mvebu architecture entry irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected ARM: mvebu: Use the ARMADA_370_XP_IRQ option irqchip/armada-370-xp: Allow allocation of multiple MSIs irqchip/armada-370-xp: Use shorter names for irq_chip irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate irqchip/armada-370-xp: Use the generic MSI infrastructure irqchip/armada-370-xp: Add Kconfig option for the driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 08:44:14 +08:00
CONFIG_ARCH_MVEBU=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_QCOM=y
arm64: defconfig: enable ARCH_ROCKCHIP Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17 06:34:23 +08:00
CONFIG_ARCH_ROCKCHIP=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_ARCH_SEATTLE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_ARCH_SYNQUACER=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
arm64: defconfig: enable Renesas R8A7796 SoC This patch enables the Renesas R8A7796 SoC in the arm64 defconfig. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-05-24 09:54:40 +08:00
CONFIG_ARCH_R8A7796=y
arm64: defconfig: enable R8A77965 SoC Enable the Renesas R-Car M3-N (R8A77965) SoC in the ARM64 defconfig. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-23 16:51:15 +08:00
CONFIG_ARCH_R8A77965=y
arm64: defconfig: enable R8A77970 SoC Enable the Renesas R-Car V3M (R8A77970) SoC in the ARM64 defconfig. Suggested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-23 05:36:25 +08:00
CONFIG_ARCH_R8A77970=y
arm64: defconfig: enable R8A77980 SoC Enable the Renesas R-Car V3H (R8A77980) SoC in the ARM64 defconfig. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-06 21:20:45 +08:00
CONFIG_ARCH_R8A77980=y
arm64: defconfig: enable R8A77990 SoC Enable the Renesas R-Car E3 (R8A77990) SoC in the ARM64 defconfig. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-23 18:45:56 +08:00
CONFIG_ARCH_R8A77990=y
arm64: defconfig: Enable Renesas R8A77995 SoC Enable support for the Renesas R-Car D3 SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-08-17 19:32:11 +08:00
CONFIG_ARCH_R8A77995=y
arm64: dts: Add base stratix 10 dtsi Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node
2015-08-05 12:25:50 +08:00
CONFIG_ARCH_STRATIX10=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_ARCH_TEGRA=y
arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig Adds support for Spreadtrum's SoC Platform in the arm64 Kconfig and defconfig files. Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
2015-03-11 10:27:08 +08:00
CONFIG_ARCH_SPRD=y
arm64, defconfig: Enable Cavium Thunder SoC in defconfig This patch enables Thunder SoCs in the arm64 defconfig. This is esp. useful to add Thunder platforms to automated builds based on arm64 defconfig. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-18 23:51:06 +08:00
CONFIG_ARCH_THUNDER=y
arm64: add ARCH_THUNDER2 to defconfig This will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-02-05 08:57:06 +08:00
CONFIG_ARCH_THUNDER2=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_ARCH_UNIPHIER=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_ARCH_VEXPRESS=y
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_ARCH_XGENE=y
arm64: defconfig: enable ZTE ZX related config This patch enables the configuration for the ZTE ZX family. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-09-13 09:42:06 +08:00
CONFIG_ARCH_ZX=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_ARCH_ZYNQMP=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_PCI=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_PCI_IOV=y
arm64: defconfig: enable support for PCIe hotplug Some ARM64 server systems support PCIe hotplug, so enable the options for that. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:43 +08:00
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PCI_AARDVARK=y
arm64: defconfig: Enable Tegra PCI controller The driver has supported the 64-bit Tegra210 for a while now, so enable it in the defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-18 22:46:20 +08:00
CONFIG_PCI_TEGRA=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PCIE_RCAR=y
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
arm64: Add ThunderX drivers to defconfig ThunderX needs its PCI host drivers to do anything useful, and it's probably helpful to have networking by default too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-11 23:15:41 +08:00
CONFIG_PCI_HOST_THUNDER_PEM=y
CONFIG_PCI_HOST_THUNDER_ECAM=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PCIE_ROCKCHIP_HOST=m
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCIE_KIRIN=y
CONFIG_PCIE_HISI_STB=y
arm64: defconfig: enable 48-bit virtual addresses Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous DDR regions that require 48-bit VA to have the linear map cover the entire range of DDR. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:34 +08:00
CONFIG_ARM64_VA_BITS_48=y
ARM64: Enable multi-core scheduler support by default Make sure that the task scheduler domain hierarchy is set-up correctly on systems with single or multi-cluster topology. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-20 00:55:49 +08:00
CONFIG_SCHED_MC=y
arm64: defconfig: Enable NUMA and NUMA_BALANCING Since much more arm64 SoCs with numa nodes, it's better to enable NUMA and NUMA_BALANCING to improve the performance on test. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-18 13:57:19 +08:00
CONFIG_NUMA=y
arm64: defconfig: Enable CONFIG_PREEMPT by default This way we can spot early bugs when just testing with the default config. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-05 18:03:53 +08:00
CONFIG_PREEMPT=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_KSM=y
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE Enable ACPI APEI MEMORY FAILURE option for ARM64, so that memory errors will be handled. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-16 23:45:11 +08:00
CONFIG_MEMORY_FAILURE=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_TRANSPARENT_HUGEPAGE=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_CMA=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_SECCOMP=y
arm64/kexec: Enable kexec in the arm64 defconfig Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-24 01:54:48 +08:00
CONFIG_KEXEC=y
arm64: kdump: enable kdump in defconfig Kdump is enabled by default as kexec is. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-04-03 10:24:39 +08:00
CONFIG_CRASH_DUMP=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_XEN=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
arm64: Enable HIBERNATION in defconfig This patch adds CONFIG_HIBERNATION to the arm64 defconfig. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-08-18 00:24:04 +08:00
CONFIG_HIBERNATION=y
arm64: defconfig: Enable CONFIG_WQ_POWER_EFFICIENT_DEFAULT commit cee22a15052f ("workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues") introduced the concept of power efficient workqueues (4 years back), but it was never enabled in upstream kernel configs. Power efficient workqueues are simply marked as "unbound," so that jobs queued to them can run on any CPU in the system. It leaves the target CPU selection to the scheduler, which is the best place for such decision making. This improves power efficiency for workqueues which are otherwise pinned to a CPU. Enable it for ARM64 platforms as ARM platforms were the main target for the introduction of power efficient workqueues. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-03 18:28:41 +08:00
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64 ARM32 and ARM64 have the same DT definitions and the same approaches. The generic ARM cpuidle driver can be put in common for those two architectures. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Rob Herring <robherring2@gmail.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-02-02 23:32:46 +08:00
CONFIG_ARM_CPUIDLE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CPU_FREQ=y
arm64: defconfig: enable more cpufreq governors Enable the various CPUFREQ governors and statistics to ease development. Don't change the default governor - performance governor. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-06 21:05:03 +08:00
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
arm64: defconfig: enable common modules for power management Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-01 12:51:09 +08:00
CONFIG_CPUFREQ_DT=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_ACPI_CPPC_CPUFREQ=m
arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ Add the cpu frequency scaling support for Armada 37xx by default, this should allow a better coverage in kernel continuous integration tests. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-12-15 23:25:01 +08:00
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ Enable Tegra186 CPU frequency scaling support by default. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-16 19:46:51 +08:00
CONFIG_ARM_TEGRA186_CPUFREQ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_IP_MULTICAST=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_IPV6=m
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_BPF_JIT=y
arm64: defconfig: enable bluetooth supports as modules Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:07 +08:00
CONFIG_BT=m
CONFIG_BT_HIDP=m
# CONFIG_BT_HS is not set
# CONFIG_BT_LE is not set
CONFIG_BT_LEDS=y
# CONFIG_BT_DEBUGFS is not set
arm64: defconfig: Enable bluetooth USB support Enable the Bluetooth USB controller which is present in the RK3399 Kevin Chromebook. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:02 +08:00
CONFIG_BT_HCIBTUSB=m
arm64: defconfig: enable bluetooth supports as modules Enable the following items for bluetooth mouse and speaker which base on HCIUART. a) CONFIG_BT_HCIUART b) CONFIG_BT_HCIUART_LL c) CONFIG_BT_HIDP Enable bluetooth LED support. d) CONFIG_BT_LEDS Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:07 +08:00
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_LL=y
arm64: defconfig: Enable LAN and BT support for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 19:28:41 +08:00
CONFIG_BT_HCIUART_BCM=y
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
CONFIG_RFKILL=m
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
arm64: defconfig: enable devtmpfs mount option Matching x86 and making it more convenient to run the arm64 default kernel as distros like Ubuntu need this option. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-30 23:06:34 +08:00
CONFIG_DEVTMPFS_MOUNT=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_DMA_CMA=y
arm64: defconfig: Increase CMA size for VC4 The VC4 needs more memory than the default setting (16 MB): vc4-drm soc:gpu: swiotlb: coherent allocation failed, size=16777216 [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA: vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12. You may need to enable CMA or give it more memory. vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12 vc4-drm soc:gpu: master bind failed: -12 vc4-drm: probe of soc:gpu failed with error -12 So increase the value to 32 MB and fix this issue. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-03 05:31:40 +08:00
CONFIG_CMA_SIZE_MBYTES=32
arm64: defconfig: Enable HISILICON_LPC Now that the driver has been merged for the HiSilicon LPC host, enable the relevant config. Turning on this config will also enable config INDIRECT_PIO, which would have not been enabled previously - see config info for more details. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-04-30 23:15:40 +08:00
CONFIG_HISILICON_LPC=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_SIMPLE_PM_BUS=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD=y
arm64: defconfig: enable CONFIG_MTD_BLOCK Enable the block layer support for MTD devices. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30 09:55:46 +08:00
CONFIG_MTD_BLOCK=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD_M25P80=y
arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT Enable the NAND framework and the Denali NAND controller driver. This NAND controller is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30 09:55:47 +08:00
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_DENALI_DT=y
mtd: nand: use reworked NAND controller driver with Marvell EBU SoCs Choose to compile and embed marvell_nand.c as NAND controller driver instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU SoCs. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-09 18:36:34 +08:00
CONFIG_MTD_NAND_MARVELL=y
arm64: defconfig: Enable CONFIG_MTD_NAND_QCOM for IPQ8074 QCOM IPQ8074 boards contain NAND flash memory for which this config needs to be enabled. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-06 17:20:30 +08:00
CONFIG_MTD_NAND_QCOM=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD_SPI_NOR=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_BLK_DEV_LOOP=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_BLK_DEV_NBD=m
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_BLK=y
arm64: defconfig: enable BLK_DEV_NVME NVME is non-volatile storage media attached via PCIe. NVME devices typically have much higher potential throughput than other block devices, like SATA, NVME is a must-have requirement for ARM64 based servers. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:41 +08:00
CONFIG_BLK_DEV_NVME=m
arm64: defconfig: enable Generic on-chip SRAM driver Most of the ARM SoCs have small SRAM memory used for various purposes that require faster access to data compared to normal DDR. This patch enables the Generic on-chip SRAM driver on ARM64. Cc: Kevin Hilman <khilman@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-20 23:24:08 +08:00
CONFIG_SRAM=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_EEPROM_AT25=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
arm64: defconfig: enable SCSI_HISI_SAS_PCI Enable HiSilicon SAS controller based on PCI device, which is included in hip08 SoC. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-07-18 19:44:57 +08:00
CONFIG_SCSI_HISI_SAS_PCI=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PLATFORM=m
scsi: arm64: defconfig: enable configs for Hisilicon ufs Signed-off-by: Li Wei <liwei213@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-17 17:36:59 +08:00
CONFIG_SCSI_UFS_HISI=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_SCSI_UFS_QCOM=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_ATA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
arm64: defconfig: Add Ceva ahci to the defconfig The Ceva ahci controller is available on the Xilinx Zynq UltraScale+ MPSoC. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [catalin.marinas@arm.com: removed unnecessary defconfig changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-29 13:02:08 +08:00
CONFIG_AHCI_CEVA=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_AHCI_MVEBU=y
arm64: configs: Enable X-Gene SATA and ethernet in defconfig Currently when run on an APM platform the ARMv8 defconfig has no viable options for rootfs other than ramdisk which is rather limiting. Since we already have both SATA and the bits needed for NFS root enabled we just need to enable the relevant drivers so do that, helping enable direct testing of upstream. If the configuration ends up becoming too big we can consider modularising some of the drivers and asking people to use an initramfs but for now this is not an issue. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-08-15 03:57:16 +08:00
CONFIG_AHCI_XGENE=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_AHCI_QORIQ=y
arm64: defconfig: Add Juno SATA controller The ARM Juno (r1 and r2) boards feature a SATA controller soldered on the board and connected to the PCI bus. Add the respective driver to defconfig to get hard disks supported out of the box on the Junos. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-05 17:44:18 +08:00
CONFIG_SATA_SIL24=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SATA_RCAR=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NETDEVICES=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TUN=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_VETH=m
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_NET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_AMD_XGBE=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_NET_XGENE=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_ATL1C=m
arm64: defconfig: Enable Cadence MACB/GEM support This patch enables the cadence MACB/GEM support that is needed by lg1k SoCs. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-01 09:39:59 +08:00
CONFIG_MACB=y
arm64: Add ThunderX drivers to defconfig ThunderX needs its PCI host drivers to do anything useful, and it's probably helpful to have networking by default too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-11 23:15:41 +08:00
CONFIG_THUNDER_NIC_PF=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_HIX5HD2_GMAC=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
arm64: defconfig: enable MVNETA Now that the Armada 37xx SoCs support the mvneta driver, enable it by default. It is especially useful when booting on an NFS root. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-21 01:27:17 +08:00
CONFIG_MVNETA=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MVPP2=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_SKY2=y
arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers The EMAC is present on Qualcomm Technologies' server and some mobile chips, and is used as the primary Ethernet interface. Systems that have these SOCs typically have an Atheros 803x or Marvell 88e1111 PHY in them, so enable those drivers too. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:47 +08:00
CONFIG_QCOM_EMAC=m
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_RAVB=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SMC91X=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_SMSC911X=y
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 20:23:27 +08:00
CONFIG_SNI_AVE=y
arm64: defconfig: add support for Socionext SynQuacer based platforms Enable support in arm64's defconfig for Socionext SynQuacer based platforms, by enabling the arch Kconfig symbol, and enabling builtin support for the ethernet, GPIO and SDHCI controllers Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-14 17:26:37 +08:00
CONFIG_SNI_NETSEC=y
arm64: defconfig: enable stmmac and realtek PHY as modules Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the meson-gxbb-p20x boards is already enabled. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-06-04 06:38:15 +08:00
CONFIG_STMMAC_ETH=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MDIO_BUS_MUX_MMIOREG=y
arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers The EMAC is present on Qualcomm Technologies' server and some mobile chips, and is used as the primary Ethernet interface. Systems that have these SOCs typically have an Atheros 803x or Marvell 88e1111 PHY in them, so enable those drivers too. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:47 +08:00
CONFIG_AT803X_PHY=m
CONFIG_MARVELL_PHY=m
arm64: defconfig: enable the Marvell 10G PHY as a module The Marvell 10G PHY is present on mvebu platforms. Enable it as a module so that the network works on these platforms. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-18 15:58:06 +08:00
CONFIG_MARVELL_10G_PHY=m
ARM64: configs: Activate Internal PHY for Meson GXL Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-14 17:42:50 +08:00
CONFIG_MESON_GXL_PHY=m
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_MICREL_PHY=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_REALTEK_PHY=m
arm64: defconfig: Enable CONFIG_ROCKCHIP_PHY Make the rockchip PHY driver built into the kernel. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 21:56:42 +08:00
CONFIG_ROCKCHIP_PHY=y
arm64: defconfig: enable several common USB network adapters The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:53 +08:00
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
arm64: defconfig: Enable LAN and BT support for RPi 3 B+ The Raspberry Pi 3 B+ has a Microchip LAN7515 (connect via USB) and a Cypress CYW43455 (connect via UART). This patch enables the necessary drivers. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2018-04-21 19:28:41 +08:00
CONFIG_USB_LAN78XX=m
arm64: defconfig: enable several common USB network adapters The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:53 +08:00
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_BRCMFMAC=m
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver Enable the wireless network driver to support the WiFi adapter present in RK3399 Kevin Chromebooks. Note that this also enables Bluetooth via USB. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:01 +08:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_INPUT_EVDEV=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_KEYBOARD_ADC=m
ARM64: add GPIO keys to the defconfig The Juno board, and likely many other boards, likes to use simple GPIO keys for input events. Enabled this in the default ARM64 defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-04 19:41:41 +08:00
CONFIG_KEYBOARD_GPIO=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_KEYBOARD_CROS_EC=y
arm64: defconfig: Enable Atmel Maxtouch driver Enable the Atmel Maxtouch driver to support the touchscreen and touchpad present in RK3399 Kevin Chromebooks. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:40:00 +08:00
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
arm: defconfig: Enable PM8941 pwr key This patch enables the PM8941 pwr key driver. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-19 13:00:17 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:06 +08:00
CONFIG_INPUT_HISI_POWERKEY=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SERIO_SERPORT is not set
arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-10-04 21:22:23 +08:00
CONFIG_SERIO_AMBAKMI=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_LEGACY_PTY_COUNT=16
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_BCM2835AUX=y
arm64: defconfig: enable ARCH_ROCKCHIP Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17 06:34:23 +08:00
CONFIG_SERIAL_8250_DW=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_SERIAL_8250_MT6577=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_SERIAL_8250_UNIPHIER=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_TEGRA=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_SERIAL_SH_SCI=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_SERIAL_MVEBU_UART=y
arm64: defconfig: enable support for serial port connected device This patch enables these configs: +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y As example, a bluetooth device connected to UART port can be supported by this. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:26 +08:00
CONFIG_SERIAL_DEV_BUS=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_CONSOLE=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_CHARDEV=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_I2C_BCM2835=m
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_IMX=y
arm64: defconfig: enable meson I2C Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-15 01:21:45 +08:00
CONFIG_I2C_MESON=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_MV64XXX=y
arm64: defconfig: enable I2C_PXA Now that the Armada 37xx SoCs support the i2c pxa driver, enable it by default. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-23 01:31:46 +08:00
CONFIG_I2C_PXA=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_I2C_QUP=y
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:46:30 +08:00
CONFIG_I2C_RK3X=y
arm64: defconfig: Enable SH Mobile I2C controller Enable SH Mobile I2C controller for use on R-Car Gen3 SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-26 16:52:26 +08:00
CONFIG_I2C_SH_MOBILE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_TEGRA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_I2C_UNIPHIER_F=y
arm64: defconfig: Enable Renesas R-Car I2C Controller Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-18 10:07:18 +08:00
CONFIG_I2C_RCAR=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_I2C_CROS_EC_TUNNEL=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI=y
arm64: defconfig: enable CONFIG_SPI_ARMADA_3700 The SPI is used on many boards (especially for the serial flashes). Enable it by default. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-04-06 22:00:48 +08:00
CONFIG_SPI_ARMADA_3700=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_SPI_MESON_SPICC=m
CONFIG_SPI_MESON_SPIFC=m
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_SPI_ORION=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI_PL022=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_SPI_ROCKCHIP=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_SPI_QUP=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SPI_S3C64XX=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_SPI_SPIDEV=m
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_SPMI=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_PINCTRL_SINGLE=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PINCTRL_MAX77620=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PINCTRL_IPQ8074=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_PINCTRL_MSM8916=y
arm64: configs: enable configs for msm899(2/4) basic support Given the mimimal hardware support for msm899(2/4) currently. A few config options are needed to allow for continued development and booting. The following are needed for continued development and booting: -8994 pinctrl for serial support -Enable Global Glock Controller (gcc) Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-05 04:56:34 +08:00
CONFIG_PINCTRL_MSM8994=y
arm64: defconfig: enable msm8996 pinctrl support This patch enables pinctrl support required to boot msm8996/apq8096 boards. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-17 23:18:02 +08:00
CONFIG_PINCTRL_MSM8996=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_PINCTRL_QDF2XXX=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PINCTRL_MT7622=y
arm64: defconfig: Enable DesignWare APB GPIO controller The Synopsys DesignWare APB GPIO controller is used by several vender's socs, like apm/marvell/altera/hisilicon, enable it by default. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-01-29 16:39:06 +08:00
CONFIG_GPIO_DWAPB=y
arm64: defconfig: add support for Socionext SynQuacer based platforms Enable support in arm64's defconfig for Socionext SynQuacer based platforms, by enabling the arch Kconfig symbol, and enabling builtin support for the ethernet, GPIO and SDHCI controllers Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-14 17:26:37 +08:00
CONFIG_GPIO_MB86S7X=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_PL061=y
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC Enable GPIO for Renesas R-Car Gen3 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-29 07:09:19 +08:00
CONFIG_GPIO_RCAR=y
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30 18:00:52 +08:00
CONFIG_GPIO_UNIPHIER=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_XGENE=y
arm64: xgene: defconfig: Enable Standby GPIO Enable CONFIG_GPIO_XGENE_SB. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07 05:35:58 +08:00
CONFIG_GPIO_XGENE_SB=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_MAX77620=y
arm64: defconfig: Enable Rockchip io-domain driver Heiko Stübner justified pretty well the change in commit e330eb86ba0b ("ARM: multi_v7_defconfig: enable Rockchip io-domain driver"). This change is also needed for arm64 rockchip boards, so, do the same for arm64. The io-domain driver is necessary to notify the soc about voltages changes happening on supplying regulators. Probably the most important user right now is the mmc tuning code, where the soc needs to get notified when the voltage is dropped to the 1.8V point. As this option is necessary to successfully tune UHS cards etc, it should get built in. Otherwise, tuning will fail with, dwmmc_rockchip fe320000.dwmmc: All phases bad! mmc0: tuning execution failed: -5 Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:57 +08:00
CONFIG_POWER_AVS=y
CONFIG_ROCKCHIP_IODOMAIN=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_POWER_RESET_MSM=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE Enable CONFIG_SYSCON_REBOOT_MODE Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:25 +08:00
CONFIG_SYSCON_REBOOT_MODE=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_BATTERY_SBS=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_ARM_SCPI=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_INA2XX=m
arm64: defconfig: Enable RPi voltage sensor The patch enables the hwmon driver for the Raspberry Pi. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-05-26 03:24:39 +08:00
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
arm64: defconfig: enable common modules for power management Enable common modules for power management; one is to enable CPUFREQ_DT driver; the driver is used by many platforms by passing OPP table from device tree. Also enables thermal related drivers. Firstly we need enable configuration CPU_THERMAL for CPU cooling device driver, this will bind thermal zone with CPU cooling device; and enable 'power allocator' thermal governor. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-01 12:51:09 +08:00
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_THERMAL_EMULATION=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_RCAR_GEN3_THERMAL=y
arm64: defconfig: enable the Armada thermal driver This patch enables the Armada thermal driver to support thermal management on Marvell EBU Armada SoCs (7K,8K). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-05-14 22:58:59 +08:00
CONFIG_ARMADA_THERMAL=y
arm64: defconfig: add CONFIG_BRCMSTB_THERMAL Turn on CONFIG_BRCMSTB_THERMAL as module. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-10 06:02:57 +08:00
CONFIG_BRCMSTB_THERMAL=m
arm64: defconfig: Enable exynos thermal config This patch enables Exynos thermal and related configs for the TMU found on Exynos7 SoC. This also enables thermal emulation mode to test trip points. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25 11:34:09 +08:00
CONFIG_EXYNOS_THERMAL=y
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL Enable Tegra BPMP thermal sensor support by default, built as a module. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-11-16 19:46:52 +08:00
CONFIG_TEGRA_BPMP_THERMAL=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_QCOM_TSENS=y
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE Enable the thermal monitor driver and the AVE ethernet driver implemented on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-27 20:23:27 +08:00
CONFIG_UNIPHIER_THERMAL=y
arm64: defconfig: enable Renesas Watchdog Timer Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-04-01 19:56:26 +08:00
CONFIG_WATCHDOG=y
arm64: defconfig: add CONFIG_ARM_SP805_WATCHDOG Enable the SP805 watchdog timer Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-05-29 02:01:37 +08:00
CONFIG_ARM_SP805_WATCHDOG=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_S3C2410_WATCHDOG=y
arm64: defconfig: enable meson WDT as modules Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-03 08:13:01 +08:00
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RENESAS_WDT=y
arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG Enable the watchdog driver for UniPhier SoC Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-18 14:38:10 +08:00
CONFIG_UNIPHIER_WATCHDOG=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_BCM2835_WDT=y
arm64: defconfig: Enable BD9571MWV regulator The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car Starter Kit Premier/Pro development boards. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-23 21:35:31 +08:00
CONFIG_MFD_BD9571MWV=y
arm64: defconfig: Enable MFD_AXP20X_RSB The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). Enable the driver for this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: Refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-12 13:40:42 +08:00
CONFIG_MFD_AXP20X_RSB=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_CROS_EC=y
arm/arm64: configs: Remove the MFD_ prefix for MFD_CROS_EC_I2C/SPI symbols. The cros-ec I2C and SPI transport drivers have been moved from MFD subsystem to platform/chrome, at the same time, the config symbol has been renamed and lost the MFD_ prefix, so update all configs to the new config symbol name. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-07-02 18:22:00 +08:00
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_SPI=y
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks. Enable following drivers for merged devices: - ChromeOS EC RTC driver. - ChromeOS EC userspace interface. - ChromeOS EC light and proximity sensors. - ChromeOS EC Barometer Sensor driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:58 +08:00
CONFIG_MFD_CROS_EC_CHARDEV=m
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_MFD_EXYNOS_LPASS=m
arm64: defconfig: enable support hi6421v530 PMIC Enable configs for hi6421v530 mfd and regulator driver + CONFIG_MFD_HI6421_PMIC=y + CONFIG_REGULATOR_HI6421V530=y Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:24 +08:00
CONFIG_MFD_HI6421_PMIC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_HI655X_PMIC=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_MFD_MAX77620=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_MFD_SPMI_PMIC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MFD_RK808=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_MFD_SEC_CORE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
arm64: defconfig: Enable REGULATOR_AXP20X The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). The regulators of this PMIC supply all power rails of the SoC and many external peripherals. Enable the driver for the regulators of this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-12 13:40:43 +08:00
CONFIG_REGULATOR_AXP20X=y
arm64: defconfig: Enable BD9571MWV regulator The BD9571 PMIC is present on the Renesas Salvator-X(S) and R-Car Starter Kit Premier/Pro development boards. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-05-23 21:35:31 +08:00
CONFIG_REGULATOR_BD9571MWV=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_REGULATOR_FAN53555=y
arm64: defconfig: Enable SDHI and GPIO_REGULATOR This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-31 05:09:59 +08:00
CONFIG_REGULATOR_GPIO=y
arm64: defconfig: enable support hi6421v530 PMIC Enable configs for hi6421v530 mfd and regulator driver + CONFIG_MFD_HI6421_PMIC=y + CONFIG_REGULATOR_HI6421V530=y Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:24 +08:00
CONFIG_REGULATOR_HI6421V530=y
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey This patch enables a number of devices currently supported by the Hi6220 and 96boards HiKey. These include a) Hi655x PMIC and regulator b) Hi6220 I2C, USB, MMC, mailbox, and reset c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO Since b) and c) are already in the 4.6-rc3, so kept a) only in this patch and updated subject as well. v2: - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in. - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:51 +08:00
CONFIG_REGULATOR_HI655X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_REGULATOR_QCOM_SMD_RPM=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_REGULATOR_QCOM_SPMI=y
arm64: defconfig: enable RK808 components Many rockchip based arm64 boards use RK808 as PMIC, so enabe it here let the board bootup normally. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [added rk808-rtc as module and rk808-clk output built in] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:50:28 +08:00
CONFIG_REGULATOR_RK808=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_REGULATOR_S2MPS11=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_REGULATOR_VCTRL=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_RC_CORE=m
CONFIG_RC_DECODERS=y
CONFIG_RC_DEVICES=y
CONFIG_IR_MESON=m
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_DVB_NET is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-15 01:10:26 +08:00
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS5433_DECON=y
CONFIG_DRM_EXYNOS7_DECON=y
CONFIG_DRM_EXYNOS_DSI=y
# CONFIG_DRM_EXYNOS_DP is not set
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_DRM_ROCKCHIP=m
CONFIG_ROCKCHIP_ANALOGIX_DP=y
CONFIG_ROCKCHIP_CDN_DP=y
CONFIG_ROCKCHIP_DW_HDMI=y
CONFIG_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_ROCKCHIP_INNO_HDMI=y
arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules Extend the ARM64 defconfig to enable the DU DRM device as module together with required dependencies of V4L2 FCP and VSP modules. This enables VGA output on the r8a7795 Salvator-X board. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-26 13:24:22 +08:00
CONFIG_DRM_RCAR_DU=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_DRM_RCAR_LVDS=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_SIMPLE=m
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:05 +08:00
CONFIG_DRM_I2C_ADV7511=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_DRM_VC4=m
arm64: defconfig: Enable hisilicon hibmc drm driver Enable DRM_HISI_HIBMC as module for Hisilicon D03/D05 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-22 21:20:56 +08:00
CONFIG_DRM_HISI_HIBMC=m
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey Enable HiSilicon kirin drm driver for HiKey: CONFIG_DRM_HISI_KIRIN Enable adv7511/adv7533 for HiKey: CONFIG_DRM_I2C_ADV7511 Build these components as modules. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-24 10:42:05 +08:00
CONFIG_DRM_HISI_KIRIN=m
ARM64: defconfig: enable DRM_MESON as module Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-12-09 08:56:23 +08:00
CONFIG_DRM_MESON=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_FB=y
arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-10-04 21:22:23 +08:00
CONFIG_FB_ARMCLCD=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BACKLIGHT_GENERIC=m
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_BACKLIGHT_PWM=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BACKLIGHT_LP855X=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
arm64: defconfig: add Renesas sound and AK4613 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25 14:39:48 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_SND_BCM2835_SOC_I2S=m
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_SND_SOC_ROCKCHIP=m
CONFIG_SND_SOC_ROCKCHIP_I2S=m
CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
CONFIG_SND_SOC_ROCKCHIP_RT5645=m
CONFIG_SND_SOC_RK3399_GRU_SOUND=m
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SND_SOC_SAMSUNG=y
arm64: defconfig: compile ak4613 and renesas sound as modules Compile the renesas sound and ak4613 drivers as modules to reduce the ARM64 kernel size. These modules are currently only used by Renesas platforms so there should little risk of negative impact of this change on other users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [simon: consolidated two patches into one] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-19 08:23:59 +08:00
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_AK4613=m
arm64: defconfig: Enable more peripherals for Samsung Chromebook Plus. Enable the Rockchip sound driver with MAX98357A/RT5514/DA7219 codecs, Infineon TPM security chip (compliant with TCG TIS 1.2 TPM specification), vctrl regulators for dynamic CPU voltages, UVC camera support and SBS- compliant gas gauges needed for the Samsung Chromebook Plus. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-07-18 00:06:06 +08:00
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_MAX98357A=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
CONFIG_SND_SOC_RT5645=m
arm64: defconfig: makes SND_SIMPLE_CARD to module Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-26 15:13:54 +08:00
CONFIG_SND_SIMPLE_CARD=m
arm64: defconfig: Enable CONFIG_SND_AUDIO_GRAPH_CARD CONFIG_SND_AUDIO_GRAPH_CARD is needed to use HDMI sound with video Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-26 15:14:14 +08:00
CONFIG_SND_AUDIO_GRAPH_CARD=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_I2C_HID=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_OTG=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_USB_XHCI_HCD=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_USB_XHCI_TEGRA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_EHCI_EXYNOS=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_HCD=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_OHCI_EXYNOS=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_OHCI_HCD_PLATFORM=y
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-21 18:47:01 +08:00
CONFIG_USB_RENESAS_USBHS=m
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB_STORAGE=y
arm64: defconfig: enable MUSB HDRC along with Allwinner glue Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role controller for USB OTG. This is need for verifying gadget functions, so enable them by default. Tested 'otg' mode with mass storage function. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-12-07 01:49:58 +08:00
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_USB_DWC3=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_USB_DWC2=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
arm64: defconfig: re-enable Qualcomm DB410c USB Stephen Boyd reworked some Qualcomm USB code earlier this year. The result requires a few different config options to be enabled in order for the USB on the DragonBoard 410c to continue working, but these were never added to arm64 "defconfig". As a result, USB on that board stopped working during the v4.13-rc1 merge window. Re-enable this functionality by setting the needed config options in the arm64 "defconfig" file. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-16 22:22:57 +08:00
CONFIG_USB_CHIPIDEA_ULPI=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_USB_ISP1760=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_HSIC_USB3503=y
arm64: defconfig: enable nop-xceiv PHY driver This commit enables the nop-xceiv PHY driver, which is needed for USB support to work on the MacchiatoBin platform (Marvell Armada 8K). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-23 23:40:14 +08:00
CONFIG_NOP_USB_XCEIV=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_ULPI=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_GADGET=y
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-07-21 18:47:01 +08:00
CONFIG_USB_RENESAS_USBHS_UDC=m
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_USB_RENESAS_USB3=m
arm64: defconfig: re-enable Qualcomm DB410c USB Stephen Boyd reworked some Qualcomm USB code earlier this year. The result requires a few different config options to be enabled in order for the USB on the DragonBoard 410c to continue working, but these were never added to arm64 "defconfig". As a result, USB on that board stopped working during the v4.13-rc1 merge window. Re-enable this functionality by setting the needed config options in the arm64 "defconfig" file. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-16 22:22:57 +08:00
CONFIG_USB_ULPI_BUS=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_BLOCK_MINORS=32
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC_ARMMMCI=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SDHCI=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_MMC_SDHCI_ACPI=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SDHCI_PLTFM=y
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_MMC_SDHCI_OF_ARASAN=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_MMC_SDHCI_OF_ESDHC=y
arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE Enable the Cadence SD/SDIO/eMMC controller. This is used on Socionext UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-12-26 10:14:53 +08:00
CONFIG_MMC_SDHCI_CADENCE=y
arm64: defconfig: Enable sdhci-tegra driver This driver is used to service the SDHCI interfaces found on NVIDIA tegra SoCs. Enabling it allows SD and eMMC cards to be used for the root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:41:22 +08:00
CONFIG_MMC_SDHCI_TEGRA=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_MMC_SDHCI_F_SDH30=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MMC_MESON_GX=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_MMC_SDHCI_MSM=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SPI=y
arm64: defconfig: Enable SDHI and GPIO_REGULATOR This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs and already enabled in the DT of the r8a7795/salvator-x (H3). Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-31 05:09:59 +08:00
CONFIG_MMC_SDHI=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_MMC_DW_HI3798CV200=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_DW_K3=y
arm64: defconfig: enable I2C and DW MMC controller on rockchip platform I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-07 19:46:30 +08:00
CONFIG_MMC_DW_ROCKCHIP=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_SUNXI=y
arm64: set CONFIG_MMC_BCM2835=y in defconfig We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-03-08 17:19:09 +08:00
CONFIG_MMC_BCM2835=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_MMC_SDHCI_XENON=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_LEDS_GPIO=y
ARM64: defconfig: enable the leds-pwm driver and default-on trigger This enables the leds-pwm driver to support LEDs which are PWM-powered (and thus dimmable). Additionally we have to enable the "default-on" trigger - this was not required before because the gpio-leds driver has a separate "default-state" property which can be used to enable the LED by default. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-02-20 06:23:25 +08:00
CONFIG_LEDS_PWM=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_LEDS_SYSCON=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_LEDS_TRIGGER_DISK=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
arm64: defconfig: enable new trigger modes for leds Most development boards and devices have one or more LEDs. It is useful during debugging if they can be wired to show different behaviours such as disk or cpu activity or a load-average dependent heartbeat. Enable panic and disk activity triggers so they can be tied to LED activity during debugging as well. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-06 15:08:13 +08:00
CONFIG_LEDS_TRIGGER_PANIC=y
arm64: defconfig: enable EDAC options Enable EDAC (Error Detection and Correction) support for ARM64 server systems that feature it, so that user space applications can be notified of memory errors. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:45 +08:00
CONFIG_EDAC=y
arm64: defconfig: enable EDAC GHES option Enable CONFIG_EDAC_GHES option for ARM64,so that the memory errors are processed and reported to the user space. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-16 23:45:22 +08:00
CONFIG_EDAC_GHES=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_CLASS=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_MAX77686=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RTC_DRV_RK808=m
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_RTC_DRV_S5M=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_RTC_DRV_DS3232=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_EFI=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_RTC_DRV_CROS_EC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_RTC_DRV_S3C=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RTC_DRV_PL031=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_RTC_DRV_SUN6I=y
arm64: defconfig: enable RTC on Armada 7K/8K SoCs The Armada 38x RTC driver supports also the RTC controller found on the Armada 7K/8K SoCs, so enable it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-10-02 23:44:16 +08:00
CONFIG_RTC_DRV_ARMADA38X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_TEGRA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_XGENE=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_DMADEVICES=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_DMA_BCM2835=m
arm64: defconfig: enable DMA driver for hi3660 enable DMA driver for hi3660. Signed-off-by: Wang Ruyi <wangruyi@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:28 +08:00
CONFIG_K3_DMA=y
arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K This commit enables the XORv2 DMA driver, which is used on the ARM64 Marvell Armada 7K and 8K platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-12-22 23:24:18 +08:00
CONFIG_MV_XOR_V2=y
arm64: defconfig: Enable PL330 DMA controller This patch enables PL330 DMA controller found on exynos7 SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-12 20:50:58 +08:00
CONFIG_PL330_DMA=y
arm64: defconfig: Enable tegra-apbdma driver This driver enables the use of the DMA engine from several of the peripherals found on NVIDIA Tegra SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:42:57 +08:00
CONFIG_TEGRA20_APB_DMA=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_QCOM_BAM_DMA=y
arm64: defconfig: Enable QDF2432 config options Now that ACPI is on in the defconfig, the time seems right to enable drivers for the SD/MMC, DMA, and pin control hardware described in the ACPI tables of the QDF2432 server platform. Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-07-01 22:27:17 +08:00
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RCAR_DMAC=y
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_RENESAS_USB_DMAC=m
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_VIRTIO_PCI=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_BALLOON=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_MMIO=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_COMMON_CLK_RK808=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_COMMON_CLK_SCPI=y
arm64: defconfig: add CS2000 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01 13:36:57 +08:00
CONFIG_COMMON_CLK_CS2000_CP=y
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver The S3C RTC controller on Exynos7 platform uses RTC source clock from S2MPS11 PMIC. This patch enables the required drivers to make RTC work on Exynos7 Espresso board. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05 18:06:51 +08:00
CONFIG_COMMON_CLK_S2MPS11=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_CLK_QORIQ=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_COMMON_CLK_PWM=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_COMMON_CLK_QCOM=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_QCOM_CLK_SMD_RPM=y
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl These configs are required for booting kernel in QCOM IPQ8074 boards. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-05-04 19:54:01 +08:00
CONFIG_IPQ_GCC_8074=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_MSM_GCC_8916=y
arm64: configs: enable configs for msm899(2/4) basic support Given the mimimal hardware support for msm899(2/4) currently. A few config options are needed to allow for continued development and booting. The following are needed for continued development and booting: -8994 pinctrl for serial support -Enable Global Glock Controller (gcc) Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-11-05 04:56:34 +08:00
CONFIG_MSM_GCC_8994=y
arm64: defconfig: Enable qcom msm8996 clk drivers Enable the clk drivers on msm8996. This allows us to boot and test most device drivers on this SoC. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-16 09:07:51 +08:00
CONFIG_MSM_MMCC_8996=y
arm64: defconfig: enable missing HWSPINLOCK The hardware spinlock drivers now depend on HWSPINLOCK (instead of selecting it), so we need to explicitly enable it after commit 35fc8a07d7f9 ("Make HWSPINLOCK a menuconfig to ease disabling") Without HWSPINLOCK, various drivers are left with unsatisfied dependencies and Qcom boards using shared memory based communication to request regulators are failing to boot and mount rootfs. Fix this by explicitly enabling HWSPINLOCK in defconfig. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-07-19 20:55:13 +08:00
CONFIG_HWSPINLOCK=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_HWSPINLOCK_QCOM=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_MHU=y
ARM64: configs: Add Platform MHU in defconfig Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-11-03 17:11:24 +08:00
CONFIG_PLATFORM_MHU=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_BCM2835_MBOX=y
arm64: defconfig: Enable the APCS IPC driver on Qualcomm platforms The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the 8916 it is needed to enable the clock controller that in turn enables cpufreq on the platform while on the 8996 it is needed for communication with RPM. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-02-12 19:03:32 +08:00
CONFIG_QCOM_APCS_IPC=y
arm64: defconfig: enable rockchip graphics Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-24 23:02:10 +08:00
CONFIG_ROCKCHIP_IOMMU=y
arm64: defconfig: Enable the Tegra SMMU by default Display and graphics can't work together without an SMMU, so it is effectively always getting enabled anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14 19:10:14 +08:00
CONFIG_TEGRA_IOMMU_SMMU=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARM_SMMU=y
arm64: defconfig: enable SMMUv3 config Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-01-09 19:50:46 +08:00
CONFIG_ARM_SMMU_V3=y
arm64: defconfig: Enable QCOM_IOMMU Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the Dragonboard 410c. With this change, graphics console and GPU are working fine (using mesa/freedreno for GPU driver). Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-11 23:19:25 +08:00
CONFIG_QCOM_IOMMU=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_RPMSG_QCOM_GLINK_RPM=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_RPMSG_QCOM_SMD=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_RASPBERRYPI_POWER=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_QCOM_SMEM=y
arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:30 +08:00
CONFIG_QCOM_SMD_RPM=y
CONFIG_QCOM_SMP2P=y
CONFIG_QCOM_SMSM=y
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_ROCKCHIP_PM_DOMAINS=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
arm64: defconfig: Enable Tegra186 SoC Enable Tegra186 SoC. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-07-05 17:04:28 +08:00
CONFIG_ARCH_TEGRA_186_SOC=y
arm64: defconfig: Enable NVIDIA Tegra194 support Enable NVIDIA Tegra194 support in the default 64-bit ARM configuration. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-02-20 19:58:07 +08:00
CONFIG_ARCH_TEGRA_194_SOC=y
arm64: defconfig: Enable TI's AM6 SoC platform Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-28 08:46:50 +08:00
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_SOC_TI=y
arm64: defconfig: Enable UFS on msm8996 Enable GLINK RPM so that we get RPM regulators and clocks and enable the UFS host controller driver and the Qualcomm UFS platform driver. The UFS phy is selected by the Qualcomm UFS driver. The simple ondemand devfreq governor must be builtin, as there's no mechanism for automatically loading it, causing UFS HCD initialization to fail. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 12:02:46 +08:00
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_EXTCON_USB_GPIO=y
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399 Enables typec phyter and extcon driver for cable detection that is used by USB 3.0 controller for Rockchip rk3399 SoCs. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:56 +08:00
CONFIG_EXTCON_USBC_CROS_EC=y
arm64: defconfig: Enable the Tegra SMMU by default Display and graphics can't work together without an SMMU, so it is effectively always getting enabled anyway. Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14 19:10:14 +08:00
CONFIG_MEMORY=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_ROCKCHIP_SARADC=m
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks. Enable following drivers for merged devices: - ChromeOS EC RTC driver. - ChromeOS EC userspace interface. - ChromeOS EC light and proximity sensors. - ChromeOS EC Barometer Sensor driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:58 +08:00
CONFIG_IIO_CROS_EC_SENSORS_CORE=m
CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_IIO_CROS_EC_BARO=m
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PWM=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_PWM_BCM2835=m
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_PWM_CROS_EC=m
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PWM_MESON=m
arm64: defconfig: Enable PWM and USB for R-Car Enables PWM controller, USB-DMAC that is used by HS-USB, USB 3.0 peripheral controller and USB 3.0 PHY for R-Car SoCs. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-21 13:57:16 +08:00
CONFIG_PWM_RCAR=m
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_PWM_ROCKCHIP=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_PWM_SAMSUNG=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PWM_TEGRA=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_XGENE=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_HI6220_USB=y
arm64: defconfig: enable drivers for Poplar support It enables driver support of Ethernet, eMMC, Combo/INNO phy and PCIe for Hi3798CV200 Poplar platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-11 10:50:49 +08:00
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
arm64: defconfig: enable Marvell CP110 comphy The comphy is an hardware block giving access to common PHYs that can be used by various other engines (Network, SATA, ...). This is used on Marvell 7k/8k platforms for now. Enable the corresponding driver. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-18 15:58:07 +08:00
CONFIG_PHY_MVEBU_CP110_COMPHY=y
arm64: defconfig: Enable PCIe on msm8996 and db820c The msm8996 PCIe sits behind the "agnoc0", which is represented as a simple-pm-bus, so enable support for this. Then enable the QMP phy driver. Also enable the atl1c ethernet driver and ath10k wlan driver to support these components on the DragonBoard820c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-26 03:25:41 +08:00
CONFIG_PHY_QCOM_QMP=m
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
arm64: defconfig: allow rk3399-based boards to boot from mmc and usb Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-18 00:15:59 +08:00
CONFIG_PHY_ROCKCHIP_EMMC=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
arm64: defconfig: enable some core options for 64bit Rockchip socs Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-25 07:06:50 +08:00
CONFIG_PHY_ROCKCHIP_PCIE=m
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399 Enables typec phyter and extcon driver for cable detection that is used by USB 3.0 controller for Rockchip rk3399 SoCs. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16 22:39:56 +08:00
CONFIG_PHY_ROCKCHIP_TYPEC=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PHY_TEGRA_XUSB=y
arm64: defconfig: enable HiSilicon PMU driver Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-06-27 10:49:46 +08:00
CONFIG_HISI_PMU=y
arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU Now that the drivers are available, enable support for L2 and L3 performance monitoring Qualcomm Datacenter Technologies Centriq SoCs. These PMU drivers provide support for performance optimization. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:46 +08:00
CONFIG_QCOM_L2_PMU=y
CONFIG_QCOM_L3_PMU=y
arm64: defconfig: enable thermal sensor on QCOM platforms Enable the driver for the TSENS IP that is present across several QCOM SoCs. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-06 21:05:02 +08:00
CONFIG_QCOM_QFPROM=y
arm64: defconfig: enable rockchip efuse The efuses on Rockchip socs often contain informations about specifics of the chip its running on (leakage currents etc) which components might want to read to adjust settings accordingly. So enable the efuse early for that. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-29 22:57:59 +08:00
CONFIG_ROCKCHIP_EFUSE=y
arm64: defconfig: enable CONFIG_UNIPHIER_EFUSE Enable the efuse driver for UniPhier SoC Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-30 09:26:55 +08:00
CONFIG_UNIPHIER_EFUSE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_MESON_EFUSE=m
arm64: defconfig: enable OP-TEE This patch enables configs for Trusted Execution Environment (TEE) and OP-TEE. +CONFIG_TEE=y +CONFIG_OPTEE=y Signed-off-by: Victor Chong <victor.chong@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-10 10:37:27 +08:00
CONFIG_TEE=y
CONFIG_OPTEE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_SCPI_PROTOCOL=y
arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
2016-03-20 14:15:59 +08:00
CONFIG_RASPBERRYPI_FIRMWARE=y
arm64: defconfig: enable EFI_CAPSULE_LOADER CONFIG_EFI_CAPSULE_LOADER allows the user to update the EFI firmware, which is useful on ARM64 server platforms. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:42 +08:00
CONFIG_EFI_CAPSULE_LOADER=y
arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-18 05:52:29 +08:00
CONFIG_ACPI=y
arm64: defconfig: enable APEI and GHES features ARM64 server platforms can support ACPI Platform Error Interface (APEI) and Generic Hardware Error Source (GHES) features, so enable them. Platforms which support the firmware-first RAS error reporting model require APEI and GHES functionality for the OS to receive and report error records provided by the platform. PCIe AER functionality is required for PCIe AER errors to be properly reported and recovered from. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-22 01:30:44 +08:00
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE Enable ACPI APEI MEMORY FAILURE option for ARM64, so that memory errors will be handled. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-16 23:45:11 +08:00
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ Enable APEI EINJ for ARM64 to support the error injection. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-01-16 23:45:34 +08:00
CONFIG_ACPI_APEI_EINJ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
CONFIG_QUOTA=y
CONFIG_AUTOFS4_FS=y
arm64: defconfig: add options for virtualization and containers Enable options commonly needed by popular virtualization and container applications. Use modules when possible to avoid too much overhead for users not interested. - add namespace and cgroup options needed - add seccomp - optional, but enhances Qemu etc - bridge, nat, veth, macvtap and multicast for routing guests and containers - btfrs and overlayfs modules for container COW backends - while near it, make fuse a module instead of built-in. Generated with make saveconfig and dropping unrelated spurious change hunks while commiting. bloat-o-meter old-vmlinux vmlinux: add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652) .... Total: Before=10515408, After=10604060, chg +0.84% Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-15 16:27:59 +08:00
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_VFAT_FS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_HUGETLBFS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CONFIGFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_EFIVAR_FS=y
arm64: defconfig: Enable squashfs support squashfs can be a convenient way to use a root filesystem stored as a file on some other root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:44:26 +08:00
CONFIG_SQUASHFS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_NFS_V4=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_ROOT_NFS=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_9P_FS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
arm64: defconfig: Enable printk timestamps Timestamps in the kernel log can be useful to quickly determine where time is spent during boot. There are tools that can generate charts of the boot time, but it's sometimes convenient to see this live and without the need to go through scripts to parse the logs first. Also, this option is enabled on a large number of configurations, not enabling it is confusing because the boot log looks very different from what one is used to. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:45:36 +08:00
CONFIG_PRINTK_TIME=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_DEBUG_INFO=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_FS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_MAGIC_SYSRQ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
# CONFIG_DEBUG_PREEMPT is not set
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_FTRACE is not set
arm64: defconfig: enable memtest The kernel memtest utility is incredibly useful for detecting memory problems, but sadly isn't in defconfig. The memtest itself is only run when the user has explicitly passed a memtest option on the kernel command line, so simply enabling the option should not have a negative impact. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-15 22:02:44 +08:00
CONFIG_MEMTEST=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_SECURITY=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_CRYPTO_ECHAINIV=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
arm64: defconfig: renormalize based on recent additions The defconfig has drifted over time, as Kconfig entries have changed order or default values. Several maintainers ended up running 'savedefconfig' themselves which caused a cascade of conflicts. Let's do it once and for all in our tree before -rc2 instead. Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-24 01:24:23 +08:00
CONFIG_CRYPTO_SHA512_ARM64_CE=m
CONFIG_CRYPTO_SHA3_ARM64=m
CONFIG_CRYPTO_SM3_ARM64_CE=m
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_CRYPTO_GHASH_ARM64_CE=y
arm64: defconfig: add recently added crypto drivers as modules Add the arm64 crypto drivers that have been added over the past couple of kernel releases to its defconfig as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-17 03:51:52 +08:00
CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
CONFIG_CRYPTO_CRC32_ARM64_CE=m
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
arm64: defconfig: add recently added crypto drivers as modules Add the arm64 crypto drivers that have been added over the past couple of kernel releases to its defconfig as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-17 03:51:52 +08:00
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRYPTO_AES_ARM64_BS=m