linux/drivers/net/wireless/ath/ath9k/recv.c

1399 lines
37 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/dma-mapping.h>
#include <linux/relay.h>
#include "ath9k.h"
#include "ar9003_mac.h"
#define SKB_CB_ATHBUF(__skb) (*((struct ath_buf **)__skb->cb))
static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
{
return sc->ps_enabled &&
(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP);
}
/*
* Setup and link descriptors.
*
* 11N: we can no longer afford to self link the last descriptor.
* MAC acknowledges BA status as long as it copies frames to host
* buffer (or rx fifo). This can incorrectly acknowledge packets
* to a sender if last desc is self-linked.
*/
static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
struct sk_buff *skb;
ATH_RXBUF_RESET(bf);
ds = bf->bf_desc;
ds->ds_link = 0; /* link to null */
ds->ds_data = bf->bf_buf_addr;
/* virtual addr of the beginning of the buffer. */
skb = bf->bf_mpdu;
BUG_ON(skb == NULL);
ds->ds_vdata = skb->data;
/*
* setup rx descriptors. The rx_bufsize here tells the hardware
* how much data it can DMA to us and that we are prepared
* to process
*/
ath9k_hw_setuprxdesc(ah, ds,
common->rx_bufsize,
0);
if (sc->rx.rxlink == NULL)
ath9k_hw_putrxbuf(ah, bf->bf_daddr);
else
*sc->rx.rxlink = bf->bf_daddr;
sc->rx.rxlink = &ds->ds_link;
}
static void ath_setdefantenna(struct ath_softc *sc, u32 antenna)
{
/* XXX block beacon interrupts */
ath9k_hw_setantenna(sc->sc_ah, antenna);
sc->rx.defant = antenna;
sc->rx.rxotherant = 0;
}
static void ath_opmode_init(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 rfilt, mfilt[2];
/* configure rx filter */
rfilt = ath_calcrxfilter(sc);
ath9k_hw_setrxfilter(ah, rfilt);
/* configure bssid mask */
ath_hw_setbssidmask(common);
/* configure operational mode */
ath9k_hw_setopmode(ah);
/* calculate and install multicast filter */
mfilt[0] = mfilt[1] = ~0;
ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
}
static bool ath_rx_edma_buf_link(struct ath_softc *sc,
enum ath9k_rx_qtype qtype)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_rx_edma *rx_edma;
struct sk_buff *skb;
struct ath_buf *bf;
rx_edma = &sc->rx.rx_edma[qtype];
if (skb_queue_len(&rx_edma->rx_fifo) >= rx_edma->rx_fifo_hwsize)
return false;
bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
list_del_init(&bf->list);
skb = bf->bf_mpdu;
ATH_RXBUF_RESET(bf);
memset(skb->data, 0, ah->caps.rx_status_len);
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
ah->caps.rx_status_len, DMA_TO_DEVICE);
SKB_CB_ATHBUF(skb) = bf;
ath9k_hw_addrxbuf_edma(ah, bf->bf_buf_addr, qtype);
skb_queue_tail(&rx_edma->rx_fifo, skb);
return true;
}
static void ath_rx_addbuffer_edma(struct ath_softc *sc,
enum ath9k_rx_qtype qtype, int size)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_buf *bf, *tbf;
if (list_empty(&sc->rx.rxbuf)) {
ath_dbg(common, QUEUE, "No free rx buf available\n");
return;
}
list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list)
if (!ath_rx_edma_buf_link(sc, qtype))
break;
}
static void ath_rx_remove_buffer(struct ath_softc *sc,
enum ath9k_rx_qtype qtype)
{
struct ath_buf *bf;
struct ath_rx_edma *rx_edma;
struct sk_buff *skb;
rx_edma = &sc->rx.rx_edma[qtype];
while ((skb = skb_dequeue(&rx_edma->rx_fifo)) != NULL) {
bf = SKB_CB_ATHBUF(skb);
BUG_ON(!bf);
list_add_tail(&bf->list, &sc->rx.rxbuf);
}
}
static void ath_rx_edma_cleanup(struct ath_softc *sc)
{
ath9k: Fix a dma warning/memory leak proper dma_unmapping and freeing of skb's has to be done in the rx cleanup for EDMA chipsets when the device is unloaded and this also seems to address the following warning which shows up occasionally when the device is unloaded Call Trace: [<c0148cd2>] warn_slowpath_common+0x72/0xa0 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c0148da3>] warn_slowpath_fmt+0x33/0x40 [<c03b669c>] dma_debug_device_change+0x19c/0x200 [<c0657f12>] notifier_call_chain+0x82/0xb0 [<c0171370>] __blocking_notifier_call_chain+0x60/0x90 [<c01713bf>] blocking_notifier_call_chain+0x1f/0x30 [<c044f594>] __device_release_driver+0xa4/0xc0 [<c044f647>] driver_detach+0x97/0xa0 [<c044e65c>] bus_remove_driver+0x6c/0xe0 [<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60 [<c0450109>] driver_unregister+0x49/0x80 [<c0299f54>] ? sysfs_remove_file+0x14/0x20 [<c03c3ab2>] pci_unregister_driver+0x32/0x80 [<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k] [<f92c8467>] ath9k_exit+0x17/0x36 [ath9k] [<c06523cd>] ? mutex_unlock+0xd/0x10 [<c018e27f>] sys_delete_module+0x13f/0x200 [<c02139bb>] ? sys_munmap+0x4b/0x60 [<c06547c5>] ? restore_all+0xf/0xf [<c0657a20>] ? spurious_fault+0xe0/0xe0 [<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c065b863>] sysenter_do_call+0x12/0x38 ---[ end trace 16e1c1521c06bcf9 ]--- Mapped at: [<c03b7938>] debug_dma_map_page+0x48/0x120 [<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k] [<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k] [<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-23 17:03:14 +08:00
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_buf *bf;
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
ath9k: Fix a dma warning/memory leak proper dma_unmapping and freeing of skb's has to be done in the rx cleanup for EDMA chipsets when the device is unloaded and this also seems to address the following warning which shows up occasionally when the device is unloaded Call Trace: [<c0148cd2>] warn_slowpath_common+0x72/0xa0 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c0148da3>] warn_slowpath_fmt+0x33/0x40 [<c03b669c>] dma_debug_device_change+0x19c/0x200 [<c0657f12>] notifier_call_chain+0x82/0xb0 [<c0171370>] __blocking_notifier_call_chain+0x60/0x90 [<c01713bf>] blocking_notifier_call_chain+0x1f/0x30 [<c044f594>] __device_release_driver+0xa4/0xc0 [<c044f647>] driver_detach+0x97/0xa0 [<c044e65c>] bus_remove_driver+0x6c/0xe0 [<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60 [<c0450109>] driver_unregister+0x49/0x80 [<c0299f54>] ? sysfs_remove_file+0x14/0x20 [<c03c3ab2>] pci_unregister_driver+0x32/0x80 [<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k] [<f92c8467>] ath9k_exit+0x17/0x36 [ath9k] [<c06523cd>] ? mutex_unlock+0xd/0x10 [<c018e27f>] sys_delete_module+0x13f/0x200 [<c02139bb>] ? sys_munmap+0x4b/0x60 [<c06547c5>] ? restore_all+0xf/0xf [<c0657a20>] ? spurious_fault+0xe0/0xe0 [<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c065b863>] sysenter_do_call+0x12/0x38 ---[ end trace 16e1c1521c06bcf9 ]--- Mapped at: [<c03b7938>] debug_dma_map_page+0x48/0x120 [<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k] [<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k] [<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-23 17:03:14 +08:00
if (bf->bf_mpdu) {
dma_unmap_single(sc->dev, bf->bf_buf_addr,
common->rx_bufsize,
DMA_BIDIRECTIONAL);
dev_kfree_skb_any(bf->bf_mpdu);
ath9k: Fix a dma warning/memory leak proper dma_unmapping and freeing of skb's has to be done in the rx cleanup for EDMA chipsets when the device is unloaded and this also seems to address the following warning which shows up occasionally when the device is unloaded Call Trace: [<c0148cd2>] warn_slowpath_common+0x72/0xa0 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c03b669c>] ? dma_debug_device_change+0x19c/0x200 [<c0148da3>] warn_slowpath_fmt+0x33/0x40 [<c03b669c>] dma_debug_device_change+0x19c/0x200 [<c0657f12>] notifier_call_chain+0x82/0xb0 [<c0171370>] __blocking_notifier_call_chain+0x60/0x90 [<c01713bf>] blocking_notifier_call_chain+0x1f/0x30 [<c044f594>] __device_release_driver+0xa4/0xc0 [<c044f647>] driver_detach+0x97/0xa0 [<c044e65c>] bus_remove_driver+0x6c/0xe0 [<c029af0b>] ? sysfs_addrm_finish+0x4b/0x60 [<c0450109>] driver_unregister+0x49/0x80 [<c0299f54>] ? sysfs_remove_file+0x14/0x20 [<c03c3ab2>] pci_unregister_driver+0x32/0x80 [<f92c2162>] ath_pci_exit+0x12/0x20 [ath9k] [<f92c8467>] ath9k_exit+0x17/0x36 [ath9k] [<c06523cd>] ? mutex_unlock+0xd/0x10 [<c018e27f>] sys_delete_module+0x13f/0x200 [<c02139bb>] ? sys_munmap+0x4b/0x60 [<c06547c5>] ? restore_all+0xf/0xf [<c0657a20>] ? spurious_fault+0xe0/0xe0 [<c01832f4>] ? trace_hardirqs_on_caller+0xf4/0x180 [<c065b863>] sysenter_do_call+0x12/0x38 ---[ end trace 16e1c1521c06bcf9 ]--- Mapped at: [<c03b7938>] debug_dma_map_page+0x48/0x120 [<f92ba3e8>] ath_rx_init+0x3f8/0x4b0 [ath9k] [<f92b5ae4>] ath9k_init_device+0x4c4/0x7b0 [ath9k] [<f92c2813>] ath_pci_probe+0x263/0x330 [ath9k] Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-23 17:03:14 +08:00
bf->bf_buf_addr = 0;
bf->bf_mpdu = NULL;
}
}
}
static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size)
{
skb_queue_head_init(&rx_edma->rx_fifo);
rx_edma->rx_fifo_hwsize = size;
}
static int ath_rx_edma_init(struct ath_softc *sc, int nbufs)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_hw *ah = sc->sc_ah;
struct sk_buff *skb;
struct ath_buf *bf;
int error = 0, i;
u32 size;
ath9k_hw_set_rx_bufsize(ah, common->rx_bufsize -
ah->caps.rx_status_len);
ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_LP],
ah->caps.rx_lp_qdepth);
ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_HP],
ah->caps.rx_hp_qdepth);
size = sizeof(struct ath_buf) * nbufs;
bf = devm_kzalloc(sc->dev, size, GFP_KERNEL);
if (!bf)
return -ENOMEM;
INIT_LIST_HEAD(&sc->rx.rxbuf);
for (i = 0; i < nbufs; i++, bf++) {
skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL);
if (!skb) {
error = -ENOMEM;
goto rx_init_fail;
}
memset(skb->data, 0, common->rx_bufsize);
bf->bf_mpdu = skb;
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_BIDIRECTIONAL);
if (unlikely(dma_mapping_error(sc->dev,
bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
bf->bf_buf_addr = 0;
ath_err(common,
"dma_mapping_error() on RX init\n");
error = -ENOMEM;
goto rx_init_fail;
}
list_add_tail(&bf->list, &sc->rx.rxbuf);
}
return 0;
rx_init_fail:
ath_rx_edma_cleanup(sc);
return error;
}
static void ath_edma_start_recv(struct ath_softc *sc)
{
ath9k_hw_rxena(sc->sc_ah);
ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP,
sc->rx.rx_edma[ATH9K_RX_QUEUE_HP].rx_fifo_hwsize);
ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_LP,
sc->rx.rx_edma[ATH9K_RX_QUEUE_LP].rx_fifo_hwsize);
ath_opmode_init(sc);
ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
}
static void ath_edma_stop_recv(struct ath_softc *sc)
{
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
}
int ath_rx_init(struct ath_softc *sc, int nbufs)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct sk_buff *skb;
struct ath_buf *bf;
int error = 0;
spin_lock_init(&sc->sc_pcu_lock);
common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 +
sc->sc_ah->caps.rx_status_len;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
return ath_rx_edma_init(sc, nbufs);
} else {
ath_dbg(common, CONFIG, "cachelsz %u rxbufsize %u\n",
common->cachelsz, common->rx_bufsize);
/* Initialize rx descriptors */
error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
"rx", nbufs, 1, 0);
if (error != 0) {
ath_err(common,
"failed to allocate rx descriptors: %d\n",
error);
goto err;
}
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
skb = ath_rxbuf_alloc(common, common->rx_bufsize,
GFP_KERNEL);
if (skb == NULL) {
error = -ENOMEM;
goto err;
}
bf->bf_mpdu = skb;
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(sc->dev,
bf->bf_buf_addr))) {
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
bf->bf_buf_addr = 0;
ath_err(common,
"dma_mapping_error() on RX init\n");
error = -ENOMEM;
goto err;
}
}
sc->rx.rxlink = NULL;
}
err:
if (error)
ath_rx_cleanup(sc);
return error;
}
void ath_rx_cleanup(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct sk_buff *skb;
struct ath_buf *bf;
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
ath_rx_edma_cleanup(sc);
return;
} else {
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
skb = bf->bf_mpdu;
if (skb) {
dma_unmap_single(sc->dev, bf->bf_buf_addr,
common->rx_bufsize,
DMA_FROM_DEVICE);
dev_kfree_skb(skb);
bf->bf_buf_addr = 0;
bf->bf_mpdu = NULL;
}
}
}
}
/*
* Calculate the receive filter according to the
* operating mode and state:
*
* o always accept unicast, broadcast, and multicast traffic
* o maintain current state of phy error reception (the hal
* may enable phy error frames for noise immunity work)
* o probe request frames are accepted only when operating in
* hostap, adhoc, or monitor modes
* o enable promiscuous mode according to the interface state
* o accept beacons:
* - when operating in adhoc mode so the 802.11 layer creates
* node table entries for peers,
* - when operating in station mode for collecting rssi data when
* the station is otherwise quiet, or
* - when operating as a repeater so we see repeater-sta beacons
* - when scanning
*/
u32 ath_calcrxfilter(struct ath_softc *sc)
{
u32 rfilt;
rfilt = ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
| ATH9K_RX_FILTER_MCAST;
/* if operating on a DFS channel, enable radar pulse detection */
if (sc->hw->conf.radar_enabled)
rfilt |= ATH9K_RX_FILTER_PHYRADAR | ATH9K_RX_FILTER_PHYERR;
if (sc->rx.rxfilter & FIF_PROBE_REQ)
rfilt |= ATH9K_RX_FILTER_PROBEREQ;
/*
* Set promiscuous mode when FIF_PROMISC_IN_BSS is enabled for station
* mode interface or when in monitor mode. AP mode does not need this
* since it receives all in-BSS frames anyway.
*/
if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
if (sc->rx.rxfilter & FIF_CONTROL)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
(sc->nvifs <= 1) &&
!(sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC))
rfilt |= ATH9K_RX_FILTER_MYBEACON;
else
rfilt |= ATH9K_RX_FILTER_BEACON;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->rx.rxfilter & FIF_PSPOLL))
rfilt |= ATH9K_RX_FILTER_PSPOLL;
if (conf_is_ht(&sc->hw->conf))
rfilt |= ATH9K_RX_FILTER_COMP_BAR;
if (sc->nvifs > 1 || (sc->rx.rxfilter & FIF_OTHER_BSS)) {
/* This is needed for older chips */
if (sc->sc_ah->hw_version.macVersion <= AR_SREV_VERSION_9160)
rfilt |= ATH9K_RX_FILTER_PROM;
rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL;
}
if (AR_SREV_9550(sc->sc_ah))
rfilt |= ATH9K_RX_FILTER_4ADDRESS;
return rfilt;
}
int ath_startrecv(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf, *tbf;
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
ath_edma_start_recv(sc);
return 0;
}
if (list_empty(&sc->rx.rxbuf))
goto start_recv;
sc->rx.rxlink = NULL;
list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) {
ath_rx_buf_link(sc, bf);
}
/* We could have deleted elements so the list may be empty now */
if (list_empty(&sc->rx.rxbuf))
goto start_recv;
bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
ath9k_hw_putrxbuf(ah, bf->bf_daddr);
ath9k_hw_rxena(ah);
start_recv:
ath_opmode_init(sc);
ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL));
return 0;
}
static void ath_flushrecv(struct ath_softc *sc)
{
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_rx_tasklet(sc, 1, true);
ath_rx_tasklet(sc, 1, false);
}
bool ath_stoprecv(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
bool stopped, reset = false;
ath9k_hw_abortpcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
stopped = ath9k_hw_stopdmarecv(ah, &reset);
ath_flushrecv(sc);
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_edma_stop_recv(sc);
else
sc->rx.rxlink = NULL;
if (!(ah->ah_flags & AH_UNPLUGGED) &&
unlikely(!stopped)) {
ath_err(ath9k_hw_common(sc->sc_ah),
"Could not stop RX, we could be "
"confusing the DMA engine when we start RX up\n");
ATH_DBG_WARN_ON_ONCE(!stopped);
}
return stopped && !reset;
}
static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
{
/* Check whether the Beacon frame has DTIM indicating buffered bc/mc */
struct ieee80211_mgmt *mgmt;
u8 *pos, *end, id, elen;
struct ieee80211_tim_ie *tim;
mgmt = (struct ieee80211_mgmt *)skb->data;
pos = mgmt->u.beacon.variable;
end = skb->data + skb->len;
while (pos + 2 < end) {
id = *pos++;
elen = *pos++;
if (pos + elen > end)
break;
if (id == WLAN_EID_TIM) {
if (elen < sizeof(*tim))
break;
tim = (struct ieee80211_tim_ie *) pos;
if (tim->dtim_count != 0)
break;
return tim->bitmap_ctrl & 0x01;
}
pos += elen;
}
return false;
}
static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
if (skb->len < 24 + 8 + 2 + 2)
return;
sc->ps_flags &= ~PS_WAIT_FOR_BEACON;
if (sc->ps_flags & PS_BEACON_SYNC) {
sc->ps_flags &= ~PS_BEACON_SYNC;
ath_dbg(common, PS,
"Reconfigure beacon timers based on synchronized timestamp\n");
ath9k_set_beacon(sc);
}
if (ath_beacon_dtim_pending_cab(skb)) {
/*
* Remain awake waiting for buffered broadcast/multicast
* frames. If the last broadcast/multicast frame is not
* received properly, the next beacon frame will work as
* a backup trigger for returning into NETWORK SLEEP state,
* so we are waiting for it as well.
*/
ath_dbg(common, PS,
"Received DTIM beacon indicating buffered broadcast/multicast frame(s)\n");
sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
return;
}
if (sc->ps_flags & PS_WAIT_FOR_CAB) {
/*
* This can happen if a broadcast frame is dropped or the AP
* fails to send a frame indicating that all CAB frames have
* been delivered.
*/
sc->ps_flags &= ~PS_WAIT_FOR_CAB;
ath_dbg(common, PS, "PS wait for CAB frames timed out\n");
}
}
static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb, bool mybeacon)
{
struct ieee80211_hdr *hdr;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
hdr = (struct ieee80211_hdr *)skb->data;
/* Process Beacon and CAB receive in PS state */
if (((sc->ps_flags & PS_WAIT_FOR_BEACON) || ath9k_check_auto_sleep(sc))
&& mybeacon) {
ath_rx_ps_beacon(sc, skb);
} else if ((sc->ps_flags & PS_WAIT_FOR_CAB) &&
(ieee80211_is_data(hdr->frame_control) ||
ieee80211_is_action(hdr->frame_control)) &&
is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_moredata(hdr->frame_control)) {
/*
* No more broadcast/multicast frames to be received at this
* point.
*/
sc->ps_flags &= ~(PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON);
ath_dbg(common, PS,
"All PS CAB frames received, back to sleep\n");
} else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
ath_dbg(common, PS,
"Going back to sleep after having received PS-Poll data (0x%lx)\n",
sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK));
}
}
static bool ath_edma_get_buffers(struct ath_softc *sc,
enum ath9k_rx_qtype qtype,
struct ath_rx_status *rs,
struct ath_buf **dest)
{
struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype];
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct sk_buff *skb;
struct ath_buf *bf;
int ret;
skb = skb_peek(&rx_edma->rx_fifo);
if (!skb)
return false;
bf = SKB_CB_ATHBUF(skb);
BUG_ON(!bf);
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
__skb_unlink(skb, &rx_edma->rx_fifo);
if (ret == -EINVAL) {
/* corrupt descriptor, skip this one and the following one */
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
skb = skb_peek(&rx_edma->rx_fifo);
if (skb) {
bf = SKB_CB_ATHBUF(skb);
BUG_ON(!bf);
__skb_unlink(skb, &rx_edma->rx_fifo);
list_add_tail(&bf->list, &sc->rx.rxbuf);
ath_rx_edma_buf_link(sc, qtype);
}
ath9k: fix panic caused by returning a descriptor we have queued for reuse Commit 3a2923e83c introduced a bug when a corrupt descriptor is encountered - although the following descriptor is discarded and returned to the queue for reuse the associated frame is also returned for processing. This leads to a panic: BUG: unable to handle kernel NULL pointer dereference at 000000000000003a IP: [<ffffffffa02599a5>] ath_rx_tasklet+0x165/0x1b00 [ath9k] Call Trace: <IRQ> [<ffffffff812d7fa0>] ? map_single+0x60/0x60 [<ffffffffa028f044>] ? ath9k_ioread32+0x34/0x90 [ath9k] [<ffffffffa0292eec>] athk9k_tasklet+0xdc/0x160 [ath9k] [<ffffffff8105e133>] tasklet_action+0x63/0xd0 [<ffffffff8105dbc0>] __do_softirq+0xc0/0x1e0 [<ffffffff8101a873>] ? native_sched_clock+0x13/0x80 [<ffffffff815f9d5c>] call_softirq+0x1c/0x30 [<ffffffff810151f5>] do_softirq+0x75/0xb0 [<ffffffff8105df95>] irq_exit+0xb5/0xc0 [<ffffffff815fa5b3>] do_IRQ+0x63/0xe0 [<ffffffff815f0cea>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff8131840a>] ? intel_idle+0xea/0x150 [<ffffffff813183eb>] ? intel_idle+0xcb/0x150 [<ffffffff814a1db9>] cpuidle_enter+0x19/0x20 [<ffffffff814a23d9>] cpuidle_idle_call+0xa9/0x240 [<ffffffff8101c4bf>] cpu_idle+0xaf/0x120 [<ffffffff815cda8e>] rest_init+0x72/0x74 [<ffffffff81cf4c1a>] start_kernel+0x3b7/0x3c4 [<ffffffff81cf4662>] ? repair_env_string+0x5e/0x5e [<ffffffff81cf4346>] x86_64_start_reservations+0x131/0x135 [<ffffffff81cf444a>] x86_64_start_kernel+0x100/0x10f Making sure bf is cleared to NULL in this case restores the old behaviour. Signed-off-by: Tom Hughes <tom@compton.nu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-28 01:21:15 +08:00
bf = NULL;
}
*dest = bf;
return true;
}
static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc,
struct ath_rx_status *rs,
enum ath9k_rx_qtype qtype)
{
struct ath_buf *bf = NULL;
while (ath_edma_get_buffers(sc, qtype, rs, &bf)) {
if (!bf)
continue;
return bf;
}
return NULL;
}
static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
struct ath_rx_status *rs)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
struct ath_buf *bf;
int ret;
if (list_empty(&sc->rx.rxbuf)) {
sc->rx.rxlink = NULL;
return NULL;
}
bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
ds = bf->bf_desc;
/*
* Must provide the virtual address of the current
* descriptor, the physical address, and the virtual
* address of the next descriptor in the h/w chain.
* This allows the HAL to look ahead to see if the
* hardware is done with a descriptor by checking the
* done bit in the following descriptor and the address
* of the current descriptor the DMA engine is working
* on. All this is necessary because of our use of
* a self-linked list to avoid rx overruns.
*/
ret = ath9k_hw_rxprocdesc(ah, ds, rs);
if (ret == -EINPROGRESS) {
struct ath_rx_status trs;
struct ath_buf *tbf;
struct ath_desc *tds;
memset(&trs, 0, sizeof(trs));
if (list_is_last(&bf->list, &sc->rx.rxbuf)) {
sc->rx.rxlink = NULL;
return NULL;
}
tbf = list_entry(bf->list.next, struct ath_buf, list);
/*
* On some hardware the descriptor status words could
* get corrupted, including the done bit. Because of
* this, check if the next descriptor's done bit is
* set or not.
*
* If the next descriptor's done bit is set, the current
* descriptor has been corrupted. Force s/w to discard
* this descriptor and continue...
*/
tds = tbf->bf_desc;
ret = ath9k_hw_rxprocdesc(ah, tds, &trs);
if (ret == -EINPROGRESS)
return NULL;
/*
* mark descriptor as zero-length and set the 'more'
* flag to ensure that both buffers get discarded
*/
rs->rs_datalen = 0;
rs->rs_more = true;
}
list_del(&bf->list);
if (!bf->bf_mpdu)
return bf;
/*
* Synchronize the DMA transfer with CPU before
* 1. accessing the frame
* 2. requeueing the same buffer to h/w
*/
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize,
DMA_FROM_DEVICE);
return bf;
}
/* Assumes you've already done the endian to CPU conversion */
static bool ath9k_rx_accept(struct ath_common *common,
struct ieee80211_hdr *hdr,
struct ieee80211_rx_status *rxs,
struct ath_rx_status *rx_stats,
bool *decrypt_error)
{
struct ath_softc *sc = (struct ath_softc *) common->priv;
bool is_mc, is_valid_tkip, strip_mic, mic_error;
struct ath_hw *ah = common->ah;
__le16 fc;
u8 rx_status_len = ah->caps.rx_status_len;
fc = hdr->frame_control;
is_mc = !!is_multicast_ether_addr(hdr->addr1);
is_valid_tkip = rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID &&
test_bit(rx_stats->rs_keyix, common->tkip_keymap);
strip_mic = is_valid_tkip && ieee80211_is_data(fc) &&
ieee80211_has_protected(fc) &&
!(rx_stats->rs_status &
(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_CRC | ATH9K_RXERR_MIC |
ATH9K_RXERR_KEYMISS));
/*
* Key miss events are only relevant for pairwise keys where the
* descriptor does contain a valid key index. This has been observed
* mostly with CCMP encryption.
*/
if (rx_stats->rs_keyix == ATH9K_RXKEYIX_INVALID ||
!test_bit(rx_stats->rs_keyix, common->ccmp_keymap))
rx_stats->rs_status &= ~ATH9K_RXERR_KEYMISS;
if (!rx_stats->rs_datalen) {
RX_STAT_INC(rx_len_err);
return false;
}
/*
* rs_status follows rs_datalen so if rs_datalen is too large
* we can take a hint that hardware corrupted it, so ignore
* those frames.
*/
if (rx_stats->rs_datalen > (common->rx_bufsize - rx_status_len)) {
RX_STAT_INC(rx_len_err);
return false;
}
/* Only use error bits from the last fragment */
if (rx_stats->rs_more)
return true;
mic_error = is_valid_tkip && !ieee80211_is_ctl(fc) &&
!ieee80211_has_morefrags(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
(rx_stats->rs_status & ATH9K_RXERR_MIC);
/*
* The rx_stats->rs_status will not be set until the end of the
* chained descriptors so it can be ignored if rs_more is set. The
* rs_more will be false at the last element of the chained
* descriptors.
*/
if (rx_stats->rs_status != 0) {
u8 status_mask;
if (rx_stats->rs_status & ATH9K_RXERR_CRC) {
rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
mic_error = false;
}
if (rx_stats->rs_status & ATH9K_RXERR_PHY)
return false;
if ((rx_stats->rs_status & ATH9K_RXERR_DECRYPT) ||
(!is_mc && (rx_stats->rs_status & ATH9K_RXERR_KEYMISS))) {
*decrypt_error = true;
mic_error = false;
}
/*
* Reject error frames with the exception of
* decryption and MIC failures. For monitor mode,
* we also ignore the CRC error.
*/
status_mask = ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
ATH9K_RXERR_KEYMISS;
if (ah->is_monitoring && (sc->rx.rxfilter & FIF_FCSFAIL))
status_mask |= ATH9K_RXERR_CRC;
if (rx_stats->rs_status & ~status_mask)
return false;
}
/*
* For unicast frames the MIC error bit can have false positives,
* so all MIC error reports need to be validated in software.
* False negatives are not common, so skip software verification
* if the hardware considers the MIC valid.
*/
if (strip_mic)
rxs->flag |= RX_FLAG_MMIC_STRIPPED;
else if (is_mc && mic_error)
rxs->flag |= RX_FLAG_MMIC_ERROR;
return true;
}
static int ath9k_process_rate(struct ath_common *common,
struct ieee80211_hw *hw,
struct ath_rx_status *rx_stats,
struct ieee80211_rx_status *rxs)
{
struct ieee80211_supported_band *sband;
enum ieee80211_band band;
unsigned int i = 0;
struct ath_softc __maybe_unused *sc = common->priv;
band = hw->conf.chandef.chan->band;
sband = hw->wiphy->bands[band];
if (rx_stats->rs_rate & 0x80) {
/* HT rate */
rxs->flag |= RX_FLAG_HT;
if (rx_stats->rs_flags & ATH9K_RX_2040)
rxs->flag |= RX_FLAG_40MHZ;
if (rx_stats->rs_flags & ATH9K_RX_GI)
rxs->flag |= RX_FLAG_SHORT_GI;
rxs->rate_idx = rx_stats->rs_rate & 0x7f;
return 0;
}
for (i = 0; i < sband->n_bitrates; i++) {
if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
rxs->rate_idx = i;
return 0;
}
if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
rxs->flag |= RX_FLAG_SHORTPRE;
rxs->rate_idx = i;
return 0;
}
}
/*
* No valid hardware bitrate found -- we should not get here
* because hardware has already validated this frame as OK.
*/
ath_dbg(common, ANY,
"unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
rx_stats->rs_rate);
RX_STAT_INC(rx_rate_err);
return -EINVAL;
}
static void ath9k_process_rssi(struct ath_common *common,
struct ieee80211_hw *hw,
struct ieee80211_hdr *hdr,
struct ath_rx_status *rx_stats)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = common->ah;
int last_rssi;
int rssi = rx_stats->rs_rssi;
if (!rx_stats->is_mybeacon ||
((ah->opmode != NL80211_IFTYPE_STATION) &&
(ah->opmode != NL80211_IFTYPE_ADHOC)))
return;
if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr)
ATH_RSSI_LPF(sc->last_rssi, rx_stats->rs_rssi);
last_rssi = sc->last_rssi;
if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
rssi = ATH_EP_RND(last_rssi, ATH_RSSI_EP_MULTIPLIER);
if (rssi < 0)
rssi = 0;
/* Update Beacon RSSI, this is used by ANI. */
ah->stats.avgbrssi = rssi;
}
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
* decryption key or real decryption error. This let us keep statistics there.
*/
static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ieee80211_hdr *hdr,
struct ath_rx_status *rx_stats,
struct ieee80211_rx_status *rx_status,
bool *decrypt_error)
{
struct ieee80211_hw *hw = sc->hw;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool discard_current = sc->rx.discard_next;
sc->rx.discard_next = rx_stats->rs_more;
if (discard_current)
return -EINVAL;
/*
* everything but the rate is checked here, the rate check is done
* separately to avoid doing two lookups for a rate for each frame.
*/
if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
return -EINVAL;
/* Only use status info from the last fragment */
if (rx_stats->rs_more)
return 0;
ath9k_process_rssi(common, hw, hdr, rx_stats);
if (ath9k_process_rate(common, hw, rx_stats, rx_status))
return -EINVAL;
rx_status->band = hw->conf.chandef.chan->band;
rx_status->freq = hw->conf.chandef.chan->center_freq;
rx_status->signal = ah->noise + rx_stats->rs_rssi;
rx_status->antenna = rx_stats->rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;
if (rx_stats->rs_moreaggr)
rx_status->flag |= RX_FLAG_NO_SIGNAL_VAL;
sc->rx.discard_next = false;
return 0;
}
static void ath9k_rx_skb_postprocess(struct ath_common *common,
struct sk_buff *skb,
struct ath_rx_status *rx_stats,
struct ieee80211_rx_status *rxs,
bool decrypt_error)
{
struct ath_hw *ah = common->ah;
struct ieee80211_hdr *hdr;
int hdrlen, padpos, padsize;
u8 keyix;
__le16 fc;
/* see if any padding is done by the hw and remove it */
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
fc = hdr->frame_control;
padpos = ieee80211_hdrlen(fc);
/* The MAC header is padded to have 32-bit boundary if the
* packet payload is non-zero. The general calculation for
* padsize would take into account odd header lengths:
* padsize = (4 - padpos % 4) % 4; However, since only
* even-length headers are used, padding can only be 0 or 2
* bytes and we can optimize this a bit. In addition, we must
* not try to remove padding from short control frames that do
* not have payload. */
padsize = padpos & 3;
if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
memmove(skb->data + padsize, skb->data, padpos);
skb_pull(skb, padsize);
}
keyix = rx_stats->rs_keyix;
if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error &&
ieee80211_has_protected(fc)) {
rxs->flag |= RX_FLAG_DECRYPTED;
} else if (ieee80211_has_protected(fc)
&& !decrypt_error && skb->len >= hdrlen + 4) {
keyix = skb->data[hdrlen + 3] >> 6;
if (test_bit(keyix, common->keymap))
rxs->flag |= RX_FLAG_DECRYPTED;
}
if (ah->sw_mgmt_crypto &&
(rxs->flag & RX_FLAG_DECRYPTED) &&
ieee80211_is_mgmt(fc))
/* Use software decrypt for management frames. */
rxs->flag &= ~RX_FLAG_DECRYPTED;
}
#ifdef CONFIG_ATH9K_DEBUGFS
static s8 fix_rssi_inv_only(u8 rssi_val)
{
if (rssi_val == 128)
rssi_val = 0;
return (s8) rssi_val;
}
#endif
/* returns 1 if this was a spectral frame, even if not handled. */
static int ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr,
struct ath_rx_status *rs, u64 tsf)
{
#ifdef CONFIG_ATH9K_DEBUGFS
struct ath_hw *ah = sc->sc_ah;
u8 bins[SPECTRAL_HT20_NUM_BINS];
u8 *vdata = (u8 *)hdr;
struct fft_sample_ht20 fft_sample;
struct ath_radar_info *radar_info;
struct ath_ht20_mag_info *mag_info;
int len = rs->rs_datalen;
int dc_pos;
u16 length, max_magnitude;
/* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer
* via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT
* yet, but this is supposed to be possible as well.
*/
if (rs->rs_phyerr != ATH9K_PHYERR_RADAR &&
rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT &&
rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL)
return 0;
/* check if spectral scan bit is set. This does not have to be checked
* if received through a SPECTRAL phy error, but shouldn't hurt.
*/
radar_info = ((struct ath_radar_info *)&vdata[len]) - 1;
if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK))
return 0;
/* Variation in the data length is possible and will be fixed later.
* Note that we only support HT20 for now.
*
* TODO: add HT20_40 support as well.
*/
if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) ||
(len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1))
return 1;
fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20;
length = sizeof(fft_sample) - sizeof(fft_sample.tlv);
fft_sample.tlv.length = __cpu_to_be16(length);
fft_sample.freq = __cpu_to_be16(ah->curchan->chan->center_freq);
fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0);
fft_sample.noise = ah->noise;
switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) {
case 0:
/* length correct, nothing to do. */
memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS);
break;
case -1:
/* first byte missing, duplicate it. */
memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1);
bins[0] = vdata[0];
break;
case 2:
/* MAC added 2 extra bytes at bin 30 and 32, remove them. */
memcpy(bins, vdata, 30);
bins[30] = vdata[31];
memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31);
break;
case 1:
/* MAC added 2 extra bytes AND first byte is missing. */
bins[0] = vdata[0];
memcpy(&bins[0], vdata, 30);
bins[31] = vdata[31];
memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32);
break;
default:
return 1;
}
/* DC value (value in the middle) is the blind spot of the spectral
* sample and invalid, interpolate it.
*/
dc_pos = SPECTRAL_HT20_NUM_BINS / 2;
bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2;
/* mag data is at the end of the frame, in front of radar_info */
mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1;
/* copy raw bins without scaling them */
memcpy(fft_sample.data, bins, SPECTRAL_HT20_NUM_BINS);
fft_sample.max_exp = mag_info->max_exp & 0xf;
max_magnitude = spectral_max_magnitude(mag_info->all_bins);
fft_sample.max_magnitude = __cpu_to_be16(max_magnitude);
fft_sample.max_index = spectral_max_index(mag_info->all_bins);
fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins);
fft_sample.tsf = __cpu_to_be64(tsf);
ath_debug_send_fft_sample(sc, &fft_sample.tlv);
return 1;
#else
return 0;
#endif
}
static void ath9k_apply_ampdu_details(struct ath_softc *sc,
struct ath_rx_status *rs, struct ieee80211_rx_status *rxs)
{
if (rs->rs_isaggr) {
rxs->flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN;
rxs->ampdu_reference = sc->rx.ampdu_ref;
if (!rs->rs_moreaggr) {
rxs->flag |= RX_FLAG_AMPDU_IS_LAST;
sc->rx.ampdu_ref++;
}
if (rs->rs_flags & ATH9K_RX_DELIM_CRC_PRE)
rxs->flag |= RX_FLAG_AMPDU_DELIM_CRC_ERROR;
}
}
int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
{
struct ath_buf *bf;
struct sk_buff *skb = NULL, *requeue_skb, *hdr_skb;
struct ieee80211_rx_status *rxs;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_hdr *hdr;
int retval;
struct ath_rx_status rs;
enum ath9k_rx_qtype qtype;
bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
int dma_type;
u8 rx_status_len = ah->caps.rx_status_len;
u64 tsf = 0;
u32 tsf_lower = 0;
ath9k: fix power save race conditions ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17 03:12:26 +08:00
unsigned long flags;
dma_addr_t new_buf_addr;
if (edma)
dma_type = DMA_BIDIRECTIONAL;
else
dma_type = DMA_FROM_DEVICE;
qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
tsf = ath9k_hw_gettsf64(ah);
tsf_lower = tsf & 0xffffffff;
do {
bool decrypt_error = false;
memset(&rs, 0, sizeof(rs));
if (edma)
bf = ath_edma_get_next_rx_buf(sc, &rs, qtype);
else
bf = ath_get_next_rx_buf(sc, &rs);
if (!bf)
break;
skb = bf->bf_mpdu;
if (!skb)
continue;
/*
* Take frame header from the first fragment and RX status from
* the last one.
*/
if (sc->rx.frag)
hdr_skb = sc->rx.frag;
else
hdr_skb = skb;
hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len);
rxs = IEEE80211_SKB_RXCB(hdr_skb);
if (ieee80211_is_beacon(hdr->frame_control)) {
RX_STAT_INC(rx_beacons);
if (!is_zero_ether_addr(common->curbssid) &&
ether_addr_equal(hdr->addr3, common->curbssid))
rs.is_mybeacon = true;
else
rs.is_mybeacon = false;
}
else
rs.is_mybeacon = false;
if (ieee80211_is_data_present(hdr->frame_control) &&
!ieee80211_is_qos_nullfunc(hdr->frame_control))
sc->rx.num_pkts++;
ath_debug_stat_rx(sc, &rs);
memset(rxs, 0, sizeof(struct ieee80211_rx_status));
rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
if (rs.rs_tstamp > tsf_lower &&
unlikely(rs.rs_tstamp - tsf_lower > 0x10000000))
rxs->mactime -= 0x100000000ULL;
if (rs.rs_tstamp < tsf_lower &&
unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
rxs->mactime += 0x100000000ULL;
if (rs.rs_phyerr == ATH9K_PHYERR_RADAR)
ath9k_dfs_process_phyerr(sc, hdr, &rs, rxs->mactime);
if (rs.rs_status & ATH9K_RXERR_PHY) {
if (ath_process_fft(sc, hdr, &rs, rxs->mactime)) {
RX_STAT_INC(rx_spectral);
goto requeue_drop_frag;
}
}
retval = ath9k_rx_skb_preprocess(sc, hdr, &rs, rxs,
&decrypt_error);
if (retval)
goto requeue_drop_frag;
if (rs.is_mybeacon) {
sc->hw_busy_count = 0;
ath_start_rx_poll(sc, 3);
}
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
/* If there is no memory we ignore the current RX'd frame,
* tell hardware it can give us a new frame using the old
* skb and put it at the tail of the sc->rx.rxbuf list for
* processing. */
if (!requeue_skb) {
RX_STAT_INC(rx_oom_err);
goto requeue_drop_frag;
}
/* We will now give hardware our shiny new allocated skb */
new_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
common->rx_bufsize, dma_type);
if (unlikely(dma_mapping_error(sc->dev, new_buf_addr))) {
dev_kfree_skb_any(requeue_skb);
goto requeue_drop_frag;
}
bf->bf_mpdu = requeue_skb;
bf->bf_buf_addr = new_buf_addr;
/* Unmap the frame */
dma_unmap_single(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, dma_type);
skb_put(skb, rs.rs_datalen + ah->caps.rx_status_len);
if (ah->caps.rx_status_len)
skb_pull(skb, ah->caps.rx_status_len);
if (!rs.rs_more)
ath9k_rx_skb_postprocess(common, hdr_skb, &rs,
rxs, decrypt_error);
if (rs.rs_more) {
RX_STAT_INC(rx_frags);
/*
* rs_more indicates chained descriptors which can be
* used to link buffers together for a sort of
* scatter-gather operation.
*/
if (sc->rx.frag) {
/* too many fragments - cannot handle frame */
dev_kfree_skb_any(sc->rx.frag);
dev_kfree_skb_any(skb);
RX_STAT_INC(rx_too_many_frags_err);
skb = NULL;
}
sc->rx.frag = skb;
goto requeue;
}
if (sc->rx.frag) {
int space = skb->len - skb_tailroom(hdr_skb);
if (pskb_expand_head(hdr_skb, 0, space, GFP_ATOMIC) < 0) {
dev_kfree_skb(skb);
RX_STAT_INC(rx_oom_err);
goto requeue_drop_frag;
}
sc->rx.frag = NULL;
skb_copy_from_linear_data(skb, skb_put(hdr_skb, skb->len),
skb->len);
dev_kfree_skb_any(skb);
skb = hdr_skb;
}
if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) {
/*
* change the default rx antenna if rx diversity
* chooses the other antenna 3 times in a row.
*/
if (sc->rx.defant != rs.rs_antenna) {
if (++sc->rx.rxotherant >= 3)
ath_setdefantenna(sc, rs.rs_antenna);
} else {
sc->rx.rxotherant = 0;
}
}
if (rxs->flag & RX_FLAG_MMIC_STRIPPED)
skb_trim(skb, skb->len - 8);
ath9k: fix power save race conditions ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17 03:12:26 +08:00
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if ((sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA)) ||
ath9k_check_auto_sleep(sc))
ath_rx_ps(sc, skb, rs.is_mybeacon);
ath9k: fix power save race conditions ath9k has a race on putting the chip into network sleep and having registers read from hardware. The race occurs because although ath9k_ps_restore() locks its own callers it makes use of some variables which get altered in the driver at different code paths. The variables are the ps_enabled and ps_flags. This is easily reprodicible in large network environments when roaming with the wpa_supplicant simple bgscan. You'd get some 0xdeadbeef read out on certain registers such as: ath: timeout (100000 us) on reg 0x806c: 0xdeadbeef & 0x01f00000 != 0x00000000 ath: RX failed to go idle in 10 ms RXSM=0xdeadbeef ath: timeout (100000 us) on reg 0x7000: 0xdeadbeef & 0x00000003 != 0x00000000 ath: Chip reset failed The fix is to protect the ath9k_config(hw, IEEE80211_CONF_CHANGE_PS) calls with a spin_lock_irqsave() which will disable contendors for these variables from interrupt context, timers, re-entry from mac80211 on the same callback, and most importantly from ath9k_ps_restore() which is the only call which will put the device into network sleep. There are quite a few threads and bug reports on these a few of them are: https://bugs.launchpad.net/ubuntu/karmic/+source/linux/+bug/407040 http://code.google.com/p/chromium-os/issues/detail?id=5709 http://code.google.com/p/chromium-os/issues/detail?id=5943 Stable fixes apply to [2.6.32+] Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-17 03:12:26 +08:00
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx == 3)
ath_ant_comb_scan(sc, &rs);
ath9k_apply_ampdu_details(sc, &rs, rxs);
ieee80211_rx(hw, skb);
requeue_drop_frag:
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
requeue:
list_add_tail(&bf->list, &sc->rx.rxbuf);
if (flush)
continue;
if (edma) {
ath_rx_edma_buf_link(sc, qtype);
} else {
ath_rx_buf_link(sc, bf);
ath9k_hw_rxena(ah);
}
} while (1);
if (!(ah->imask & ATH9K_INT_RXEOL)) {
ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
ath9k_hw_set_interrupts(ah);
}
return 0;
}