linux/arch/x86/mm/init.c

992 lines
29 KiB
C
Raw Normal View History

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/initrd.h>
#include <linux/ioport.h>
#include <linux/swap.h>
#include <linux/memblock.h>
#include <linux/swapfile.h>
#include <linux/swapops.h>
x86/mm: Fix a crash with kmemleak_scan() The first kmemleak_scan() call after boot would trigger the crash below because this callpath: kernel_init free_initmem mem_encrypt_free_decrypted_mem free_init_pages unmaps memory inside the .bss when DEBUG_PAGEALLOC=y. kmemleak_init() will register the .data/.bss sections and then kmemleak_scan() will scan those addresses and dereference them looking for pointer references. If free_init_pages() frees and unmaps pages in those sections, kmemleak_scan() will crash if referencing one of those addresses: BUG: unable to handle kernel paging request at ffffffffbd402000 CPU: 12 PID: 325 Comm: kmemleak Not tainted 5.1.0-rc4+ #4 RIP: 0010:scan_block Call Trace: scan_gray_list kmemleak_scan kmemleak_scan_thread kthread ret_from_fork Since kmemleak_free_part() is tolerant to unknown objects (not tracked by kmemleak), it is fine to call it from free_init_pages() even if not all address ranges passed to this function are known to kmemleak. [ bp: Massage. ] Fixes: b3f0907c71e0 ("x86/mm: Add .bss..decrypted section to hold shared variables") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190423165811.36699-1-cai@lca.pw
2019-04-24 00:58:11 +08:00
#include <linux/kmemleak.h>
2019-04-27 07:22:46 +08:00
#include <linux/sched/task.h>
#include <asm/set_memory.h>
#include <asm/e820/api.h>
#include <asm/init.h>
#include <asm/page.h>
#include <asm/page_types.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/proto.h>
#include <asm/dma.h> /* for MAX_DMA_PFN */
#include <asm/microcode.h>
x86/mm: Implement ASLR for kernel memory regions Randomizes the virtual address space of kernel memory regions for x86_64. This first patch adds the infrastructure and does not randomize any region. The following patches will randomize the physical memory mapping, vmalloc and vmemmap regions. This security feature mitigates exploits relying on predictable kernel addresses. These addresses can be used to disclose the kernel modules base addresses or corrupt specific structures to elevate privileges bypassing the current implementation of KASLR. This feature can be enabled with the CONFIG_RANDOMIZE_MEMORY option. The order of each memory region is not changed. The feature looks at the available space for the regions based on different configuration options and randomizes the base and space between each. The size of the physical memory mapping is the available physical memory. No performance impact was detected while testing the feature. Entropy is generated using the KASLR early boot functions now shared in the lib directory (originally written by Kees Cook). Randomization is done on PGD & PUD page table levels to increase possible addresses. The physical memory mapping code was adapted to support PUD level virtual addresses. This implementation on the best configuration provides 30,000 possible virtual addresses in average for each memory region. An additional low memory page is used to ensure each CPU can start with a PGD aligned virtual address (for realmode). x86/dump_pagetable was updated to correctly display each region. Updated documentation on x86_64 memory layout accordingly. Performance data, after all patches in the series: Kernbench shows almost no difference (-+ less than 1%): Before: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.63 (1.2695) User Time 1034.89 (1.18115) System Time 87.056 (0.456416) Percent CPU 1092.9 (13.892) Context Switches 199805 (3455.33) Sleeps 97907.8 (900.636) After: Average Optimal load -j 12 Run (std deviation): Elapsed Time 102.489 (1.10636) User Time 1034.86 (1.36053) System Time 87.764 (0.49345) Percent CPU 1095 (12.7715) Context Switches 199036 (4298.1) Sleeps 97681.6 (1031.11) Hackbench shows 0% difference on average (hackbench 90 repeated 10 times): attemp,before,after 1,0.076,0.069 2,0.072,0.069 3,0.066,0.066 4,0.066,0.068 5,0.066,0.067 6,0.066,0.069 7,0.067,0.066 8,0.063,0.067 9,0.067,0.065 10,0.068,0.071 average,0.0677,0.0677 Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-6-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-22 08:47:02 +08:00
#include <asm/kaslr.h>
#include <asm/hypervisor.h>
x86/mm/64: Initialize CR4.PCIDE early cpu_init() is weird: it's called rather late (after early identification and after most MMU state is initialized) on the boot CPU but is called extremely early (before identification) on secondary CPUs. It's called just late enough on the boot CPU that its CR4 value isn't propagated to mmu_cr4_features. Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two problems. First, we'd crash in the trampoline code. That's fixable, and I tried that. It turns out that mmu_cr4_features is totally ignored by secondary_start_64(), though, so even with the trampoline code fixed, it wouldn't help. This means that we don't currently have CR4.PCIDE reliably initialized before we start playing with cpu_tlbstate. This is very fragile and tends to cause boot failures if I make even small changes to the TLB handling code. Make it more robust: initialize CR4.PCIDE earlier on the boot CPU and propagate it to secondary CPUs in start_secondary(). ( Yes, this is ugly. I think we should have improved mmu_cr4_features to actually control CR4 during secondary bootup, but that would be fairly intrusive at this stage. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-11 08:48:27 +08:00
#include <asm/cpufeature.h>
#include <asm/pti.h>
2019-04-27 07:22:46 +08:00
#include <asm/text-patching.h>
/*
* We need to define the tracepoints somewhere, and tlb.c
* is only compied when SMP=y.
*/
#define CREATE_TRACE_POINTS
#include <trace/events/tlb.h>
#include "mm_internal.h"
/*
* Tables translating between page_cache_type_t and pte encoding.
*
* The default values are defined statically as minimal supported mode;
* WC and WT fall back to UC-. pat_init() updates these values to support
* more cache modes, WC and WT, when it is safe to do so. See pat_init()
* for the details. Note, __early_ioremap() used during early boot-time
* takes pgprot_t (pte encoding) and does not use these tables.
*
* Index into __cachemode2pte_tbl[] is the cachemode.
*
* Index into __pte2cachemode_tbl[] are the caching attribute bits of the pte
* (_PAGE_PWT, _PAGE_PCD, _PAGE_PAT) at index bit positions 0, 1, 2.
*/
uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
[_PAGE_CACHE_MODE_WB ] = 0 | 0 ,
[_PAGE_CACHE_MODE_WC ] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC_MINUS] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC ] = _PAGE_PWT | _PAGE_PCD,
[_PAGE_CACHE_MODE_WT ] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_WP ] = 0 | _PAGE_PCD,
};
EXPORT_SYMBOL(__cachemode2pte_tbl);
uint8_t __pte2cachemode_tbl[8] = {
[__pte2cm_idx( 0 | 0 | 0 )] = _PAGE_CACHE_MODE_WB,
[__pte2cm_idx(_PAGE_PWT | 0 | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx( 0 | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC,
[__pte2cm_idx( 0 | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_WB,
[__pte2cm_idx(_PAGE_PWT | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(0 | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
};
EXPORT_SYMBOL(__pte2cachemode_tbl);
static unsigned long __initdata pgt_buf_start;
static unsigned long __initdata pgt_buf_end;
static unsigned long __initdata pgt_buf_top;
static unsigned long min_pfn_mapped;
static bool __initdata can_use_brk_pgt = true;
/*
* Pages returned are already directly mapped.
*
* Changing that is likely to break Xen, see commit:
*
* 279b706 x86,xen: introduce x86_init.mapping.pagetable_reserve
*
* for detailed information.
*/
__ref void *alloc_low_pages(unsigned int num)
{
unsigned long pfn;
int i;
if (after_bootmem) {
unsigned int order;
order = get_order((unsigned long)num << PAGE_SHIFT);
return (void *)__get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
}
if ((pgt_buf_end + num) > pgt_buf_top || !can_use_brk_pgt) {
unsigned long ret = 0;
if (min_pfn_mapped < max_pfn_mapped) {
ret = memblock_find_in_range(
min_pfn_mapped << PAGE_SHIFT,
max_pfn_mapped << PAGE_SHIFT,
PAGE_SIZE * num , PAGE_SIZE);
}
if (ret)
memblock_reserve(ret, PAGE_SIZE * num);
else if (can_use_brk_pgt)
ret = __pa(extend_brk(PAGE_SIZE * num, PAGE_SIZE));
if (!ret)
panic("alloc_low_pages: can not alloc memory");
pfn = ret >> PAGE_SHIFT;
} else {
pfn = pgt_buf_end;
pgt_buf_end += num;
printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n",
pfn << PAGE_SHIFT, (pgt_buf_end << PAGE_SHIFT) - 1);
}
for (i = 0; i < num; i++) {
void *adr;
adr = __va((pfn + i) << PAGE_SHIFT);
clear_page(adr);
}
return __va(pfn << PAGE_SHIFT);
}
x86/mm/KASLR: Increase BRK pages for KASLR memory randomization Default implementation expects 6 pages maximum are needed for low page allocations. If KASLR memory randomization is enabled, the worse case of e820 layout would require 12 pages (no large pages). It is due to the PUD level randomization and the variable e820 memory layout. This bug was found while doing extensive testing of KASLR memory randomization on different type of hardware. Signed-off-by: Thomas Garnier <thgarnie@google.com> Cc: Aleksey Makarov <aleksey.makarov@linaro.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: kernel-hardening@lists.openwall.com Fixes: 021182e52fe0 ("Enable KASLR for physical mapping memory regions") Link: http://lkml.kernel.org/r/1470762665-88032-2-git-send-email-thgarnie@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10 01:11:05 +08:00
/*
* By default need 3 4k for initial PMD_SIZE, 3 4k for 0-ISA_END_ADDRESS.
* With KASLR memory randomization, depending on the machine e820 memory
* and the PUD alignment. We may need twice more pages when KASLR memory
* randomization is enabled.
*/
#ifndef CONFIG_RANDOMIZE_MEMORY
#define INIT_PGD_PAGE_COUNT 6
#else
#define INIT_PGD_PAGE_COUNT 12
#endif
#define INIT_PGT_BUF_SIZE (INIT_PGD_PAGE_COUNT * PAGE_SIZE)
RESERVE_BRK(early_pgt_alloc, INIT_PGT_BUF_SIZE);
void __init early_alloc_pgt_buf(void)
{
unsigned long tables = INIT_PGT_BUF_SIZE;
phys_addr_t base;
base = __pa(extend_brk(tables, PAGE_SIZE));
pgt_buf_start = base >> PAGE_SHIFT;
pgt_buf_end = pgt_buf_start;
pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT);
}
int after_bootmem;
early_param_on_off("gbpages", "nogbpages", direct_gbpages, CONFIG_X86_DIRECT_GBPAGES);
struct map_range {
unsigned long start;
unsigned long end;
unsigned page_size_mask;
};
static int page_size_mask;
static void __init probe_page_size_mask(void)
{
/*
* For pagealloc debugging, identity mapping will use small pages.
* This will simplify cpa(), which otherwise needs to support splitting
* large pages into small in interrupt context, etc.
*/
if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled())
page_size_mask |= 1 << PG_LEVEL_2M;
else
direct_gbpages = 0;
/* Enable PSE if available */
if (boot_cpu_has(X86_FEATURE_PSE))
cr4_set_bits_and_update_boot(X86_CR4_PSE);
/* Enable PGE if available */
x86/mm/pti: Disable global pages if PAGE_TABLE_ISOLATION=y Global pages stay in the TLB across context switches. Since all contexts share the same kernel mapping, these mappings are marked as global pages so kernel entries in the TLB are not flushed out on a context switch. But, even having these entries in the TLB opens up something that an attacker can use, such as the double-page-fault attack: http://www.ieee-security.org/TC/SP2013/papers/4977a191.pdf That means that even when PAGE_TABLE_ISOLATION switches page tables on return to user space the global pages would stay in the TLB cache. Disable global pages so that kernel TLB entries can be flushed before returning to user space. This way, all accesses to kernel addresses from userspace result in a TLB miss independent of the existence of a kernel mapping. Suppress global pages via the __supported_pte_mask. The user space mappings set PAGE_GLOBAL for the minimal kernel mappings which are required for entry/exit. These mappings are set up manually so the filtering does not take place. [ The __supported_pte_mask simplification was written by Thomas Gleixner. ] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:34 +08:00
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (boot_cpu_has(X86_FEATURE_PGE)) {
cr4_set_bits_and_update_boot(X86_CR4_PGE);
x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image Summary: In current kernels, with PTI enabled, no pages are marked Global. This potentially increases TLB misses. But, the mechanism by which the Global bit is set and cleared is rather haphazard. This patch makes the process more explicit. In the end, it leaves us with Global entries in the page tables for the areas truly shared by userspace and kernel and increases TLB hit rates. The place this patch really shines in on systems without PCIDs. In this case, we are using an lseek microbenchmark[1] to see how a reasonably non-trivial syscall behaves. Higher is better: No Global pages (baseline): 6077741 lseeks/sec 88 Global Pages (this set): 7528609 lseeks/sec (+23.9%) On a modern Skylake desktop with PCIDs, the benefits are tangible, but not huge for a kernel compile (lower is better): No Global pages (baseline): 186.951 seconds time elapsed ( +- 0.35% ) 28 Global pages (this set): 185.756 seconds time elapsed ( +- 0.09% ) -1.195 seconds (-0.64%) I also re-checked everything using the lseek1 test[1]: No Global pages (baseline): 15783951 lseeks/sec 28 Global pages (this set): 16054688 lseeks/sec +270737 lseeks/sec (+1.71%) The effect is more visible, but still modest. Details: The kernel page tables are inherited from head_64.S which rudely marks them as _PAGE_GLOBAL. For PTI, we have been relying on the grace of $DEITY and some insane behavior in pageattr.c to clear _PAGE_GLOBAL. This patch tries to do better. First, stop filtering out "unsupported" bits from being cleared in the pageattr code. It's fine to filter out *setting* these bits but it is insane to keep us from clearing them. Then, *explicitly* go clear _PAGE_GLOBAL from the kernel identity map. Do not rely on pageattr to do it magically. After this patch, we can see that "GLB" shows up in each copy of the page tables, that we have the same number of global entries in each and that they are the *same* entries. /sys/kernel/debug/page_tables/current_kernel:11 /sys/kernel/debug/page_tables/current_user:11 /sys/kernel/debug/page_tables/kernel:11 9caae8ad6a1fb53aca2407ec037f612d current_kernel.GLB 9caae8ad6a1fb53aca2407ec037f612d current_user.GLB 9caae8ad6a1fb53aca2407ec037f612d kernel.GLB A quick visual audit also shows that all the entries make sense. 0xfffffe0000000000 is the cpu_entry_area and 0xffffffff81c00000 is the entry/exit text: 0xfffffe0000000000-0xfffffe0000002000 8K ro GLB NX pte 0xfffffe0000002000-0xfffffe0000003000 4K RW GLB NX pte 0xfffffe0000003000-0xfffffe0000006000 12K ro GLB NX pte 0xfffffe0000006000-0xfffffe0000007000 4K ro GLB x pte 0xfffffe0000007000-0xfffffe000000d000 24K RW GLB NX pte 0xfffffe000002d000-0xfffffe000002e000 4K ro GLB NX pte 0xfffffe000002e000-0xfffffe000002f000 4K RW GLB NX pte 0xfffffe000002f000-0xfffffe0000032000 12K ro GLB NX pte 0xfffffe0000032000-0xfffffe0000033000 4K ro GLB x pte 0xfffffe0000033000-0xfffffe0000039000 24K RW GLB NX pte 0xffffffff81c00000-0xffffffff81e00000 2M ro PSE GLB x pmd [1.] https://github.com/antonblanchard/will-it-scale/blob/master/tests/lseek1.c Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205517.C80FBE05@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 04:55:17 +08:00
__supported_pte_mask |= _PAGE_GLOBAL;
x86/mm/pti: Disable global pages if PAGE_TABLE_ISOLATION=y Global pages stay in the TLB across context switches. Since all contexts share the same kernel mapping, these mappings are marked as global pages so kernel entries in the TLB are not flushed out on a context switch. But, even having these entries in the TLB opens up something that an attacker can use, such as the double-page-fault attack: http://www.ieee-security.org/TC/SP2013/papers/4977a191.pdf That means that even when PAGE_TABLE_ISOLATION switches page tables on return to user space the global pages would stay in the TLB cache. Disable global pages so that kernel TLB entries can be flushed before returning to user space. This way, all accesses to kernel addresses from userspace result in a TLB miss independent of the existence of a kernel mapping. Suppress global pages via the __supported_pte_mask. The user space mappings set PAGE_GLOBAL for the minimal kernel mappings which are required for entry/exit. These mappings are set up manually so the filtering does not take place. [ The __supported_pte_mask simplification was written by Thomas Gleixner. ] Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:34 +08:00
}
x86/mm: Introduce "default" kernel PTE mask The __PAGE_KERNEL_* page permissions are "raw". They contain bits that may or may not be supported on the current processor. They need to be filtered by a mask (currently __supported_pte_mask) to turn them into a value that we can actually set in a PTE. These __PAGE_KERNEL_* values all contain _PAGE_GLOBAL. But, with PTI, we want to be able to support _PAGE_GLOBAL (have the bit set in __supported_pte_mask) but not have it appear in any of these masks by default. This patch creates a new mask, __default_kernel_pte_mask, and applies it when creating all of the PAGE_KERNEL_* masks. This makes PAGE_KERNEL_* safe to use anywhere (they only contain supported bits). It also ensures that PAGE_KERNEL_* contains _PAGE_GLOBAL on PTI=n kernels but clears _PAGE_GLOBAL when PTI=y. We also make __default_kernel_pte_mask a non-GPL exported symbol because there are plenty of driver-available interfaces that take PAGE_KERNEL_* permissions. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205506.030DB6B6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 04:55:06 +08:00
/* By the default is everything supported: */
__default_kernel_pte_mask = __supported_pte_mask;
/* Except when with PTI where the kernel is mostly non-Global: */
if (cpu_feature_enabled(X86_FEATURE_PTI))
__default_kernel_pte_mask &= ~_PAGE_GLOBAL;
/* Enable 1 GB linear kernel mappings if available: */
if (direct_gbpages && boot_cpu_has(X86_FEATURE_GBPAGES)) {
printk(KERN_INFO "Using GB pages for direct mapping\n");
page_size_mask |= 1 << PG_LEVEL_1G;
} else {
direct_gbpages = 0;
}
}
x86,xen: introduce x86_init.mapping.pagetable_reserve Introduce a new x86_init hook called pagetable_reserve that at the end of init_memory_mapping is used to reserve a range of memory addresses for the kernel pagetable pages we used and free the other ones. On native it just calls memblock_x86_reserve_range while on xen it also takes care of setting the spare memory previously allocated for kernel pagetable pages from RO to RW, so that it can be used for other purposes. A detailed explanation of the reason why this hook is needed follows. As a consequence of the commit: commit 4b239f458c229de044d6905c2b0f9fe16ed9e01e Author: Yinghai Lu <yinghai@kernel.org> Date: Fri Dec 17 16:58:28 2010 -0800 x86-64, mm: Put early page table high at some point init_memory_mapping is going to reach the pagetable pages area and map those pages too (mapping them as normal memory that falls in the range of addresses passed to init_memory_mapping as argument). Some of those pages are already pagetable pages (they are in the range pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and everything is fine. Some of these pages are not pagetable pages yet (they fall in the range pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they are going to be mapped RW. When these pages become pagetable pages and are hooked into the pagetable, xen will find that the guest has already a RW mapping of them somewhere and fail the operation. The reason Xen requires pagetables to be RO is that the hypervisor needs to verify that the pagetables are valid before using them. The validation operations are called "pinning" (more details in arch/x86/xen/mmu.c). In order to fix the issue we mark all the pages in the entire range pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation is completed only the range pgt_buf_start-pgt_buf_end is reserved by init_memory_mapping. Hence the kernel is going to crash as soon as one of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those ranges are RO). For this reason we need a hook to reserve the kernel pagetable pages we used and free the other ones so that they can be reused for other purposes. On native it just means calling memblock_x86_reserve_range, on Xen it also means marking RW the pagetable pages that we allocated before but that haven't been used before. Another way to fix this is without using the hook is by adding a 'if (xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen counterpart, but that is just nasty. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-04-14 22:49:41 +08:00
x86/mm/64: Initialize CR4.PCIDE early cpu_init() is weird: it's called rather late (after early identification and after most MMU state is initialized) on the boot CPU but is called extremely early (before identification) on secondary CPUs. It's called just late enough on the boot CPU that its CR4 value isn't propagated to mmu_cr4_features. Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two problems. First, we'd crash in the trampoline code. That's fixable, and I tried that. It turns out that mmu_cr4_features is totally ignored by secondary_start_64(), though, so even with the trampoline code fixed, it wouldn't help. This means that we don't currently have CR4.PCIDE reliably initialized before we start playing with cpu_tlbstate. This is very fragile and tends to cause boot failures if I make even small changes to the TLB handling code. Make it more robust: initialize CR4.PCIDE earlier on the boot CPU and propagate it to secondary CPUs in start_secondary(). ( Yes, this is ugly. I think we should have improved mmu_cr4_features to actually control CR4 during secondary bootup, but that would be fairly intrusive at this stage. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-11 08:48:27 +08:00
static void setup_pcid(void)
{
if (!IS_ENABLED(CONFIG_X86_64))
return;
if (!boot_cpu_has(X86_FEATURE_PCID))
return;
if (boot_cpu_has(X86_FEATURE_PGE)) {
/*
* This can't be cr4_set_bits_and_update_boot() -- the
* trampoline code can't handle CR4.PCIDE and it wouldn't
* do any good anyway. Despite the name,
* cr4_set_bits_and_update_boot() doesn't actually cause
* the bits in question to remain set all the way through
* the secondary boot asm.
*
* Instead, we brute-force it and set CR4.PCIDE manually in
* start_secondary().
*/
cr4_set_bits(X86_CR4_PCIDE);
/*
* INVPCID's single-context modes (2/3) only work if we set
* X86_CR4_PCIDE, *and* we INVPCID support. It's unusable
* on systems that have X86_CR4_PCIDE clear, or that have
* no INVPCID support at all.
*/
if (boot_cpu_has(X86_FEATURE_INVPCID))
setup_force_cpu_cap(X86_FEATURE_INVPCID_SINGLE);
} else {
/*
* flush_tlb_all(), as currently implemented, won't work if
* PCID is on but PGE is not. Since that combination
* doesn't exist on real hardware, there's no reason to try
* to fully support it, but it's polite to avoid corrupting
* data if we're on an improperly configured VM.
*/
setup_clear_cpu_cap(X86_FEATURE_PCID);
x86/mm/64: Initialize CR4.PCIDE early cpu_init() is weird: it's called rather late (after early identification and after most MMU state is initialized) on the boot CPU but is called extremely early (before identification) on secondary CPUs. It's called just late enough on the boot CPU that its CR4 value isn't propagated to mmu_cr4_features. Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two problems. First, we'd crash in the trampoline code. That's fixable, and I tried that. It turns out that mmu_cr4_features is totally ignored by secondary_start_64(), though, so even with the trampoline code fixed, it wouldn't help. This means that we don't currently have CR4.PCIDE reliably initialized before we start playing with cpu_tlbstate. This is very fragile and tends to cause boot failures if I make even small changes to the TLB handling code. Make it more robust: initialize CR4.PCIDE earlier on the boot CPU and propagate it to secondary CPUs in start_secondary(). ( Yes, this is ugly. I think we should have improved mmu_cr4_features to actually control CR4 during secondary bootup, but that would be fairly intrusive at this stage. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-11 08:48:27 +08:00
}
}
#ifdef CONFIG_X86_32
#define NR_RANGE_MR 3
#else /* CONFIG_X86_64 */
#define NR_RANGE_MR 5
#endif
static int __meminit save_mr(struct map_range *mr, int nr_range,
unsigned long start_pfn, unsigned long end_pfn,
unsigned long page_size_mask)
{
if (start_pfn < end_pfn) {
if (nr_range >= NR_RANGE_MR)
panic("run out of range for init_memory_mapping\n");
mr[nr_range].start = start_pfn<<PAGE_SHIFT;
mr[nr_range].end = end_pfn<<PAGE_SHIFT;
mr[nr_range].page_size_mask = page_size_mask;
nr_range++;
}
return nr_range;
}
/*
* adjust the page_size_mask for small range to go with
* big page size instead small one if nearby are ram too.
*/
static void __ref adjust_range_page_size_mask(struct map_range *mr,
int nr_range)
{
int i;
for (i = 0; i < nr_range; i++) {
if ((page_size_mask & (1<<PG_LEVEL_2M)) &&
!(mr[i].page_size_mask & (1<<PG_LEVEL_2M))) {
unsigned long start = round_down(mr[i].start, PMD_SIZE);
unsigned long end = round_up(mr[i].end, PMD_SIZE);
#ifdef CONFIG_X86_32
if ((end >> PAGE_SHIFT) > max_low_pfn)
continue;
#endif
if (memblock_is_region_memory(start, end - start))
mr[i].page_size_mask |= 1<<PG_LEVEL_2M;
}
if ((page_size_mask & (1<<PG_LEVEL_1G)) &&
!(mr[i].page_size_mask & (1<<PG_LEVEL_1G))) {
unsigned long start = round_down(mr[i].start, PUD_SIZE);
unsigned long end = round_up(mr[i].end, PUD_SIZE);
if (memblock_is_region_memory(start, end - start))
mr[i].page_size_mask |= 1<<PG_LEVEL_1G;
}
}
}
x86/mm/init: Fix incorrect page size in init_memory_mapping() printks With 32-bit non-PAE kernels, we have 2 page sizes available (at most): 4k and 4M. Enabling PAE replaces that 4M size with a 2M one (which 64-bit systems use too). But, when booting a 32-bit non-PAE kernel, in one of our early-boot printouts, we say: init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 2M init_memory_mapping: [mem 0x00100000-0x36ffffff] [mem 0x00100000-0x003fffff] page 4k [mem 0x00400000-0x36ffffff] page 2M init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k Which is obviously wrong. There is no 2M page available. This is probably because of a badly-named variable: in the map_range code: PG_LEVEL_2M. Instead of renaming all the PG_LEVEL_2M's. This patch just fixes the printout: init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 4M init_memory_mapping: [mem 0x00100000-0x36ffffff] [mem 0x00100000-0x003fffff] page 4k [mem 0x00400000-0x36ffffff] page 4M init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k BRK [0x03206000, 0x03206fff] PGTABLE Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20150210212030.665EC267@viggo.jf.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-11 05:20:30 +08:00
static const char *page_size_string(struct map_range *mr)
{
static const char str_1g[] = "1G";
static const char str_2m[] = "2M";
static const char str_4m[] = "4M";
static const char str_4k[] = "4k";
if (mr->page_size_mask & (1<<PG_LEVEL_1G))
return str_1g;
/*
* 32-bit without PAE has a 4M large page size.
* PG_LEVEL_2M is misnamed, but we can at least
* print out the right size in the string.
*/
if (IS_ENABLED(CONFIG_X86_32) &&
!IS_ENABLED(CONFIG_X86_PAE) &&
mr->page_size_mask & (1<<PG_LEVEL_2M))
return str_4m;
if (mr->page_size_mask & (1<<PG_LEVEL_2M))
return str_2m;
return str_4k;
}
static int __meminit split_mem_range(struct map_range *mr, int nr_range,
unsigned long start,
unsigned long end)
{
unsigned long start_pfn, end_pfn, limit_pfn;
unsigned long pfn;
int i;
limit_pfn = PFN_DOWN(end);
/* head if not big page alignment ? */
pfn = start_pfn = PFN_DOWN(start);
#ifdef CONFIG_X86_32
/*
* Don't use a large page for the first 2/4MB of memory
* because there are often fixed size MTRRs in there
* and overlapping MTRRs into large pages can cause
* slowdowns.
*/
if (pfn == 0)
end_pfn = PFN_DOWN(PMD_SIZE);
else
end_pfn = round_up(pfn, PFN_DOWN(PMD_SIZE));
#else /* CONFIG_X86_64 */
end_pfn = round_up(pfn, PFN_DOWN(PMD_SIZE));
#endif
if (end_pfn > limit_pfn)
end_pfn = limit_pfn;
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
pfn = end_pfn;
}
/* big page (2M) range */
start_pfn = round_up(pfn, PFN_DOWN(PMD_SIZE));
#ifdef CONFIG_X86_32
end_pfn = round_down(limit_pfn, PFN_DOWN(PMD_SIZE));
#else /* CONFIG_X86_64 */
end_pfn = round_up(pfn, PFN_DOWN(PUD_SIZE));
if (end_pfn > round_down(limit_pfn, PFN_DOWN(PMD_SIZE)))
end_pfn = round_down(limit_pfn, PFN_DOWN(PMD_SIZE));
#endif
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
page_size_mask & (1<<PG_LEVEL_2M));
pfn = end_pfn;
}
#ifdef CONFIG_X86_64
/* big page (1G) range */
start_pfn = round_up(pfn, PFN_DOWN(PUD_SIZE));
end_pfn = round_down(limit_pfn, PFN_DOWN(PUD_SIZE));
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
page_size_mask &
((1<<PG_LEVEL_2M)|(1<<PG_LEVEL_1G)));
pfn = end_pfn;
}
/* tail is not big page (1G) alignment */
start_pfn = round_up(pfn, PFN_DOWN(PMD_SIZE));
end_pfn = round_down(limit_pfn, PFN_DOWN(PMD_SIZE));
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn,
page_size_mask & (1<<PG_LEVEL_2M));
pfn = end_pfn;
}
#endif
/* tail is not big page (2M) alignment */
start_pfn = pfn;
end_pfn = limit_pfn;
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
x86: Fix adjust_range_size_mask calling position Commit 8d57470d x86, mm: setup page table in top-down causes a kernel panic while setting mem=2G. [mem 0x00000000-0x000fffff] page 4k [mem 0x7fe00000-0x7fffffff] page 1G [mem 0x7c000000-0x7fdfffff] page 1G [mem 0x00100000-0x001fffff] page 4k [mem 0x00200000-0x7bffffff] page 2M for last entry is not what we want, we should have [mem 0x00200000-0x3fffffff] page 2M [mem 0x40000000-0x7bffffff] page 1G Actually we merge the continuous ranges with same page size too early. in this case, before merging we have [mem 0x00200000-0x3fffffff] page 2M [mem 0x40000000-0x7bffffff] page 2M after merging them, will get [mem 0x00200000-0x7bffffff] page 2M even we can use 1G page to map [mem 0x40000000-0x7bffffff] that will cause problem, because we already map [mem 0x7fe00000-0x7fffffff] page 1G [mem 0x7c000000-0x7fdfffff] page 1G with 1G page, aka [0x40000000-0x7fffffff] is mapped with 1G page already. During phys_pud_init() for [0x40000000-0x7bffffff], it will not reuse existing that pud page, and allocate new one then try to use 2M page to map it instead, as page_size_mask does not include PG_LEVEL_1G. At end will have [7c000000-0x7fffffff] not mapped, loop in phys_pmd_init stop mapping at 0x7bffffff. That is right behavoir, it maps exact range with exact page size that we ask, and we should explicitly call it to map [7c000000-0x7fffffff] before or after mapping 0x40000000-0x7bffffff. Anyway we need to make sure ranges' page_size_mask correct and consistent after split_mem_range for each range. Fix that by calling adjust_range_size_mask before merging range with same page size. -v2: update change log. -v3: add more explanation why [7c000000-0x7fffffff] is not mapped, and it causes panic. Bisected-by: "Xie, ChanglongX" <changlongx.xie@intel.com> Bisected-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reported-and-tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1370015587-20835-1-git-send-email-yinghai@kernel.org Cc: <stable@vger.kernel.org> v3.9 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-05-31 23:53:07 +08:00
if (!after_bootmem)
adjust_range_page_size_mask(mr, nr_range);
/* try to merge same page size and continuous */
for (i = 0; nr_range > 1 && i < nr_range - 1; i++) {
unsigned long old_start;
if (mr[i].end != mr[i+1].start ||
mr[i].page_size_mask != mr[i+1].page_size_mask)
continue;
/* move it */
old_start = mr[i].start;
memmove(&mr[i], &mr[i+1],
(nr_range - 1 - i) * sizeof(struct map_range));
mr[i--].start = old_start;
nr_range--;
}
for (i = 0; i < nr_range; i++)
pr_debug(" [mem %#010lx-%#010lx] page %s\n",
mr[i].start, mr[i].end - 1,
x86/mm/init: Fix incorrect page size in init_memory_mapping() printks With 32-bit non-PAE kernels, we have 2 page sizes available (at most): 4k and 4M. Enabling PAE replaces that 4M size with a 2M one (which 64-bit systems use too). But, when booting a 32-bit non-PAE kernel, in one of our early-boot printouts, we say: init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 2M init_memory_mapping: [mem 0x00100000-0x36ffffff] [mem 0x00100000-0x003fffff] page 4k [mem 0x00400000-0x36ffffff] page 2M init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k Which is obviously wrong. There is no 2M page available. This is probably because of a badly-named variable: in the map_range code: PG_LEVEL_2M. Instead of renaming all the PG_LEVEL_2M's. This patch just fixes the printout: init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 4M init_memory_mapping: [mem 0x00100000-0x36ffffff] [mem 0x00100000-0x003fffff] page 4k [mem 0x00400000-0x36ffffff] page 4M init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k BRK [0x03206000, 0x03206fff] PGTABLE Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20150210212030.665EC267@viggo.jf.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-11 05:20:30 +08:00
page_size_string(&mr[i]));
return nr_range;
}
struct range pfn_mapped[E820_MAX_ENTRIES];
int nr_pfn_mapped;
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
static void add_pfn_range_mapped(unsigned long start_pfn, unsigned long end_pfn)
{
nr_pfn_mapped = add_range_with_merge(pfn_mapped, E820_MAX_ENTRIES,
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
nr_pfn_mapped, start_pfn, end_pfn);
nr_pfn_mapped = clean_sort_range(pfn_mapped, E820_MAX_ENTRIES);
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
max_pfn_mapped = max(max_pfn_mapped, end_pfn);
if (start_pfn < (1UL<<(32-PAGE_SHIFT)))
max_low_pfn_mapped = max(max_low_pfn_mapped,
min(end_pfn, 1UL<<(32-PAGE_SHIFT)));
}
bool pfn_range_is_mapped(unsigned long start_pfn, unsigned long end_pfn)
{
int i;
for (i = 0; i < nr_pfn_mapped; i++)
if ((start_pfn >= pfn_mapped[i].start) &&
(end_pfn <= pfn_mapped[i].end))
return true;
return false;
}
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
* the physical memory. To access them they are temporarily mapped.
*/
unsigned long __ref init_memory_mapping(unsigned long start,
unsigned long end)
{
struct map_range mr[NR_RANGE_MR];
unsigned long ret = 0;
int nr_range, i;
pr_debug("init_memory_mapping: [mem %#010lx-%#010lx]\n",
start, end - 1);
memset(mr, 0, sizeof(mr));
nr_range = split_mem_range(mr, 0, start, end);
for (i = 0; i < nr_range; i++)
ret = kernel_physical_mapping_init(mr[i].start, mr[i].end,
mr[i].page_size_mask);
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
add_pfn_range_mapped(start >> PAGE_SHIFT, ret >> PAGE_SHIFT);
return ret >> PAGE_SHIFT;
}
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
/*
* We need to iterate through the E820 memory map and create direct mappings
* for only E820_TYPE_RAM and E820_KERN_RESERVED regions. We cannot simply
* create direct mappings for all pfns from [0 to max_low_pfn) and
* [4GB to max_pfn) because of possible memory holes in high addresses
* that cannot be marked as UC by fixed/variable range MTRRs.
* Depending on the alignment of E820 ranges, this may possibly result
* in using smaller size (i.e. 4K instead of 2M or 1G) page tables.
*
* init_mem_mapping() calls init_range_memory_mapping() with big range.
* That range would have hole in the middle or ends, and only ram parts
* will be mapped in init_range_memory_mapping().
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
*/
static unsigned long __init init_range_memory_mapping(
unsigned long r_start,
unsigned long r_end)
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
{
unsigned long start_pfn, end_pfn;
unsigned long mapped_ram_size = 0;
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
int i;
for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
u64 start = clamp_val(PFN_PHYS(start_pfn), r_start, r_end);
u64 end = clamp_val(PFN_PHYS(end_pfn), r_start, r_end);
if (start >= end)
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
continue;
/*
* if it is overlapping with brk pgt, we need to
* alloc pgt buf from memblock instead.
*/
can_use_brk_pgt = max(start, (u64)pgt_buf_end<<PAGE_SHIFT) >=
min(end, (u64)pgt_buf_top<<PAGE_SHIFT);
init_memory_mapping(start, end);
mapped_ram_size += end - start;
can_use_brk_pgt = true;
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
}
return mapped_ram_size;
x86, mm: Only direct map addresses that are marked as E820_RAM Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT ) and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not backed by actual DRAM. This is fine for holes under 4GB which are covered by fixed and variable range MTRRs to be UC. However, we run into trouble on higher memory addresses which cannot be covered by MTRRs. Our system with 1TB of RAM has an e820 that looks like this: BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable and so direct mappings are created for huge memory hole between 0x000000e038000000 to 0x0000010000000000. Even though the kernel never generates memory accesses in that region, since the page tables mark them incorrectly as being WB, our (AMD) processor ends up causing a MCE while doing some memory bookkeeping/optimizations around that area. This patch iterates through e820 and only direct maps ranges that are marked as E820_RAM, and keeps track of those pfn ranges. Depending on the alignment of E820 ranges, this may possibly result in using smaller size (i.e. 4K instead of 2M or 1G) page tables. -v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range instead. - Yinghai Lu -v3: add calculate_all_table_space_size() to get correct needed page table size. - Yinghai Lu -v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when mem map does have hole under 4g that is found by Konard on xen domU with 8g ram. - Yinghai Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:38:52 +08:00
}
static unsigned long __init get_new_step_size(unsigned long step_size)
{
/*
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
* Initial mapped size is PMD_SIZE (2M).
* We can not set step_size to be PUD_SIZE (1G) yet.
* In worse case, when we cross the 1G boundary, and
* PG_LEVEL_2M is not set, we will need 1+1+512 pages (2M + 8k)
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
* to map 1G range with PTE. Hence we use one less than the
* difference of page table level shifts.
*
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
* Don't need to worry about overflow in the top-down case, on 32bit,
* when step_size is 0, round_down() returns 0 for start, and that
* turns it into 0x100000000ULL.
* In the bottom-up case, round_up(x, 0) returns 0 though too, which
* needs to be taken into consideration by the code below.
*/
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
return step_size << (PMD_SHIFT - PAGE_SHIFT - 1);
}
/**
* memory_map_top_down - Map [map_start, map_end) top down
* @map_start: start address of the target memory range
* @map_end: end address of the target memory range
*
* This function will setup direct mapping for memory range
* [map_start, map_end) in top-down. That said, the page tables
* will be allocated at the end of the memory, and we map the
* memory in top-down.
*/
static void __init memory_map_top_down(unsigned long map_start,
unsigned long map_end)
{
unsigned long real_end, start, last_start;
unsigned long step_size;
unsigned long addr;
unsigned long mapped_ram_size = 0;
/* xen has big range in reserved near end of ram, skip it at first.*/
addr = memblock_find_in_range(map_start, map_end, PMD_SIZE, PMD_SIZE);
real_end = addr + PMD_SIZE;
/* step_size need to be small so pgt_buf from BRK could cover it */
step_size = PMD_SIZE;
max_pfn_mapped = 0; /* will get exact value next */
min_pfn_mapped = real_end >> PAGE_SHIFT;
last_start = start = real_end;
/*
* We start from the top (end of memory) and go to the bottom.
* The memblock_find_in_range() gets us a block of RAM from the
* end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages
* for page table.
*/
while (last_start > map_start) {
if (last_start > step_size) {
start = round_down(last_start - 1, step_size);
if (start < map_start)
start = map_start;
} else
start = map_start;
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
mapped_ram_size += init_range_memory_mapping(start,
last_start);
last_start = start;
min_pfn_mapped = last_start >> PAGE_SHIFT;
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
if (mapped_ram_size >= step_size)
step_size = get_new_step_size(step_size);
}
if (real_end < map_end)
init_range_memory_mapping(real_end, map_end);
}
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
/**
* memory_map_bottom_up - Map [map_start, map_end) bottom up
* @map_start: start address of the target memory range
* @map_end: end address of the target memory range
*
* This function will setup direct mapping for memory range
* [map_start, map_end) in bottom-up. Since we have limited the
* bottom-up allocation above the kernel, the page tables will
* be allocated just above the kernel and we map the memory
* in [map_start, map_end) in bottom-up.
*/
static void __init memory_map_bottom_up(unsigned long map_start,
unsigned long map_end)
{
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
unsigned long next, start;
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
unsigned long mapped_ram_size = 0;
/* step_size need to be small so pgt_buf from BRK could cover it */
unsigned long step_size = PMD_SIZE;
start = map_start;
min_pfn_mapped = start >> PAGE_SHIFT;
/*
* We start from the bottom (@map_start) and go to the top (@map_end).
* The memblock_find_in_range() gets us a block of RAM from the
* end of RAM in [min_pfn_mapped, max_pfn_mapped) used as new pages
* for page table.
*/
while (start < map_end) {
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
if (step_size && map_end - start > step_size) {
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
next = round_up(start + 1, step_size);
if (next > map_end)
next = map_end;
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
} else {
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
next = map_end;
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
}
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
mapped_ram_size += init_range_memory_mapping(start, next);
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
start = next;
x86: Fix step size adjustment during initial memory mapping The old scheme can lead to failure in certain cases - the problem is that after bumping step_size the next (non-final) iteration is only guaranteed to make available a memory block the size of what step_size was before. E.g. for a memory block [0,3004600000) we'd have: iter start end step amount 1 3004400000 30045fffff 2M 2M 2 3004000000 30043fffff 64M 4M 3 3000000000 3003ffffff 2G 64M 4 2000000000 2fffffffff 64G 64G Yet to map 64G with 4k pages (as happens e.g. under PV Xen) we need slightly over 128M, but the first three iterations made only about 70M available. The condition (new_mapped_ram_size > mapped_ram_size) for bumping step_size is just not suitable. Instead we want to bump it when we know we have enough memory available to cover a block of the new step_size. And rather than making that condition more complicated than needed, simply adjust step_size by the largest possible factor we know we can cover at that point - which is shifting it left by one less than the difference between page table level shifts. (Interestingly the original STEP_SIZE_SHIFT definition had a comment hinting at that having been the intention, just that it should have been PUD_SHIFT-PMD_SHIFT-1 instead of (PUD_SHIFT-PMD_SHIFT)/2, and of course for non-PAE 32-bit we can't really use these two constants as they're equal there.) Furthermore the comment in get_new_step_size() didn't get updated when the bottom-down mapping logic got added. Yet while an overflow (flushing step_size to zero) of the shift doesn't matter for the top-down method, it does for bottom-up because round_up(x, 0) = 0, and an upper range boundary of zero can't really work well. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/54945C1E020000780005114E@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-20 00:10:54 +08:00
if (mapped_ram_size >= step_size)
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
step_size = get_new_step_size(step_size);
}
}
void __init init_mem_mapping(void)
{
unsigned long end;
pti_check_boottime_disable();
probe_page_size_mask();
x86/mm/64: Initialize CR4.PCIDE early cpu_init() is weird: it's called rather late (after early identification and after most MMU state is initialized) on the boot CPU but is called extremely early (before identification) on secondary CPUs. It's called just late enough on the boot CPU that its CR4 value isn't propagated to mmu_cr4_features. Even if we put CR4.PCIDE into mmu_cr4_features, we'd hit two problems. First, we'd crash in the trampoline code. That's fixable, and I tried that. It turns out that mmu_cr4_features is totally ignored by secondary_start_64(), though, so even with the trampoline code fixed, it wouldn't help. This means that we don't currently have CR4.PCIDE reliably initialized before we start playing with cpu_tlbstate. This is very fragile and tends to cause boot failures if I make even small changes to the TLB handling code. Make it more robust: initialize CR4.PCIDE earlier on the boot CPU and propagate it to secondary CPUs in start_secondary(). ( Yes, this is ugly. I think we should have improved mmu_cr4_features to actually control CR4 during secondary bootup, but that would be fairly intrusive at this stage. ) Signed-off-by: Andy Lutomirski <luto@kernel.org> Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 660da7c9228f ("x86/mm: Enable CR4.PCIDE on supported systems") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-11 08:48:27 +08:00
setup_pcid();
#ifdef CONFIG_X86_64
end = max_pfn << PAGE_SHIFT;
#else
end = max_low_pfn << PAGE_SHIFT;
#endif
/* the ISA range is always mapped regardless of memory holes */
init_memory_mapping(0, ISA_END_ADDRESS);
x86/mm: Separate variable for trampoline PGD Use a separate global variable to define the trampoline PGD used to start other processors. This change will allow KALSR memory randomization to change the trampoline PGD to be correctly aligned with physical memory. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-5-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-22 08:47:01 +08:00
/* Init the trampoline, possibly with KASLR memory offset */
init_trampoline();
x86/mem-hotplug: support initialize page tables in bottom-up The Linux kernel cannot migrate pages used by the kernel. As a result, kernel pages cannot be hot-removed. So we cannot allocate hotpluggable memory for the kernel. In a memory hotplug system, any numa node the kernel resides in should be unhotpluggable. And for a modern server, each node could have at least 16GB memory. So memory around the kernel image is highly likely unhotpluggable. ACPI SRAT (System Resource Affinity Table) contains the memory hotplug info. But before SRAT is parsed, memblock has already started to allocate memory for the kernel. So we need to prevent memblock from doing this. So direct memory mapping page tables setup is the case. init_mem_mapping() is called before SRAT is parsed. To prevent page tables being allocated within hotpluggable memory, we will use bottom-up direction to allocate page tables from the end of kernel image to the higher memory. Note: As for allocating page tables in lower memory, TJ said: : This is an optional behavior which is triggered by a very specific kernel : boot param, which I suspect is gonna need to stick around to support : memory hotplug in the current setup unless we add another layer of address : translation to support memory hotplug. As for page tables may occupy too much lower memory if using 4K mapping (CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k pages), TJ said: : But as I said in the same paragraph, parsing SRAT earlier doesn't solve : the problem in itself either. Ignoring the option if 4k mapping is : required and memory consumption would be prohibitive should work, no? : Something like that would be necessary if we're gonna worry about cases : like this no matter how we implement it, but, frankly, I'm not sure this : is something worth worrying about. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 07:08:05 +08:00
/*
* If the allocation is in bottom-up direction, we setup direct mapping
* in bottom-up, otherwise we setup direct mapping in top-down.
*/
if (memblock_bottom_up()) {
unsigned long kernel_end = __pa_symbol(_end);
/*
* we need two separate calls here. This is because we want to
* allocate page tables above the kernel. So we first map
* [kernel_end, end) to make memory above the kernel be mapped
* as soon as possible. And then use page tables allocated above
* the kernel to map [ISA_END_ADDRESS, kernel_end).
*/
memory_map_bottom_up(kernel_end, end);
memory_map_bottom_up(ISA_END_ADDRESS, kernel_end);
} else {
memory_map_top_down(ISA_END_ADDRESS, end);
}
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {
/* can we preseve max_low_pfn ?*/
max_low_pfn = max_pfn;
}
#else
early_ioremap_page_table_range_init();
x86, 64bit: Use a #PF handler to materialize early mappings on demand Linear mode (CR0.PG = 0) is mutually exclusive with 64-bit mode; all 64-bit code has to use page tables. This makes it awkward before we have first set up properly all-covering page tables to access objects that are outside the static kernel range. So far we have dealt with that simply by mapping a fixed amount of low memory, but that fails in at least two upcoming use cases: 1. We will support load and run kernel, struct boot_params, ramdisk, command line, etc. above the 4 GiB mark. 2. need to access ramdisk early to get microcode to update that as early possible. We could use early_iomap to access them too, but it will make code to messy and hard to be unified with 32 bit. Hence, set up a #PF table and use a fixed number of buffers to set up page tables on demand. If the buffers fill up then we simply flush them and start over. These buffers are all in __initdata, so it does not increase RAM usage at runtime. Thus, with the help of the #PF handler, we can set the final kernel mapping from blank, and switch to init_level4_pgt later. During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. The kernel region itself will be properly mapped; other mappings may be spurious. early_make_pgtable is using kernel high mapping address to access pages to set page table. -v4: Add phys_base offset to make kexec happy, and add init_mapping_kernel() - Yinghai -v5: fix compiling with xen, and add back ident level3 and level2 for xen also move back init_level4_pgt from BSS to DATA again. because we have to clear it anyway. - Yinghai -v6: switch to init_level4_pgt in init_mem_mapping. - Yinghai -v7: remove not needed clear_page for init_level4_page it is with fill 512,8,0 already in head_64.S - Yinghai -v8: we need to keep that handler alive until init_mem_mapping and don't let early_trap_init to trash that early #PF handler. So split early_trap_pf_init out and move it down. - Yinghai -v9: switchover only cover kernel space instead of 1G so could avoid touch possible mem holes. - Yinghai -v11: change far jmp back to far return to initial_code, that is needed to fix failure that is reported by Konrad on AMD systems. - Yinghai Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1359058816-7615-12-git-send-email-yinghai@kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-25 04:19:52 +08:00
#endif
load_cr3(swapper_pg_dir);
__flush_tlb_all();
x86_init.hyper.init_mem_mapping();
early_memtest(0, max_pfn_mapped << PAGE_SHIFT);
}
2019-04-27 07:22:46 +08:00
/*
* Initialize an mm_struct to be used during poking and a pointer to be used
* during patching.
*/
void __init poking_init(void)
{
spinlock_t *ptl;
pte_t *ptep;
poking_mm = copy_init_mm();
BUG_ON(!poking_mm);
/*
* Randomize the poking address, but make sure that the following page
* will be mapped at the same PMD. We need 2 pages, so find space for 3,
* and adjust the address if the PMD ends after the first one.
*/
poking_addr = TASK_UNMAPPED_BASE;
if (IS_ENABLED(CONFIG_RANDOMIZE_BASE))
poking_addr += (kaslr_get_random_long("Poking") & PAGE_MASK) %
(TASK_SIZE - TASK_UNMAPPED_BASE - 3 * PAGE_SIZE);
if (((poking_addr + PAGE_SIZE) & ~PMD_MASK) == 0)
poking_addr += PAGE_SIZE;
/*
* We need to trigger the allocation of the page-tables that will be
* needed for poking now. Later, poking may be performed in an atomic
* section, which might cause allocation to fail.
*/
ptep = get_locked_pte(poking_mm, poking_addr, &ptl);
BUG_ON(!ptep);
pte_unmap_unlock(ptep, ptl);
}
/*
* devmem_is_allowed() checks to see if /dev/mem access to a certain address
* is valid. The argument is a physical page number.
*
* On x86, access has to be given to the first megabyte of RAM because that
* area traditionally contains BIOS code and data regions used by X, dosemu,
* and similar apps. Since they map the entire memory range, the whole range
* must be allowed (for mapping), but any areas that would otherwise be
* disallowed are flagged as being "zero filled" instead of rejected.
* Access has to be given to non-kernel-ram areas as well, these contain the
* PCI mmio resources as well as potential bios/acpi data regions.
*/
int devmem_is_allowed(unsigned long pagenr)
{
mm: fix devmem_is_allowed() for sub-page System RAM intersections Hussam reports: I was poking around and for no real reason, I did cat /dev/mem and strings /dev/mem. Then I saw the following warning in dmesg. I saved it and rebooted immediately. memremap attempted on mixed range 0x000000000009c000 size: 0x1000 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11810 at kernel/memremap.c:98 memremap+0x104/0x170 [..] Call Trace: xlate_dev_mem_ptr+0x25/0x40 read_mem+0x89/0x1a0 __vfs_read+0x36/0x170 The memremap() implementation checks for attempts to remap System RAM with MEMREMAP_WB and instead redirects those mapping attempts to the linear map. However, that only works if the physical address range being remapped is page aligned. In low memory we have situations like the following: 00000000-00000fff : Reserved 00001000-0009fbff : System RAM 0009fc00-0009ffff : Reserved ...where System RAM intersects Reserved ranges on a sub-page page granularity. Given that devmem_is_allowed() special cases any attempt to map System RAM in the first 1MB of memory, replace page_is_ram() with the more precise region_intersects() to trap attempts to map disallowed ranges. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199999 Link: http://lkml.kernel.org/r/152856436164.18127.2847888121707136898.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 92281dee825f ("arch: introduce memremap()") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Hussam Al-Tayeb <me@hussam.eu.org> Tested-by: Hussam Al-Tayeb <me@hussam.eu.org> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-15 06:26:24 +08:00
if (region_intersects(PFN_PHYS(pagenr), PAGE_SIZE,
IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE)
!= REGION_DISJOINT) {
/*
* For disallowed memory regions in the low 1MB range,
* request that the page be shown as all zeros.
*/
if (pagenr < 256)
return 2;
return 0;
}
/*
* This must follow RAM test, since System RAM is considered a
* restricted resource under CONFIG_STRICT_IOMEM.
*/
if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) {
/* Low 1MB bypasses iomem restrictions. */
if (pagenr < 256)
return 1;
return 0;
}
return 1;
}
void free_init_pages(const char *what, unsigned long begin, unsigned long end)
{
x86: Make sure free_init_pages() frees pages on page boundary When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 10:42:55 +08:00
unsigned long begin_aligned, end_aligned;
x86: Make sure free_init_pages() frees pages on page boundary When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 10:42:55 +08:00
/* Make sure boundaries are page aligned */
begin_aligned = PAGE_ALIGN(begin);
end_aligned = end & PAGE_MASK;
if (WARN_ON(begin_aligned != begin || end_aligned != end)) {
begin = begin_aligned;
end = end_aligned;
}
if (begin >= end)
return;
/*
* If debugging page accesses then do not free this memory but
* mark them not present - any buggy init-section access will
* create a kernel page fault:
*/
if (debug_pagealloc_enabled()) {
pr_info("debug: unmapping init [mem %#010lx-%#010lx]\n",
begin, end - 1);
x86/mm: Fix a crash with kmemleak_scan() The first kmemleak_scan() call after boot would trigger the crash below because this callpath: kernel_init free_initmem mem_encrypt_free_decrypted_mem free_init_pages unmaps memory inside the .bss when DEBUG_PAGEALLOC=y. kmemleak_init() will register the .data/.bss sections and then kmemleak_scan() will scan those addresses and dereference them looking for pointer references. If free_init_pages() frees and unmaps pages in those sections, kmemleak_scan() will crash if referencing one of those addresses: BUG: unable to handle kernel paging request at ffffffffbd402000 CPU: 12 PID: 325 Comm: kmemleak Not tainted 5.1.0-rc4+ #4 RIP: 0010:scan_block Call Trace: scan_gray_list kmemleak_scan kmemleak_scan_thread kthread ret_from_fork Since kmemleak_free_part() is tolerant to unknown objects (not tracked by kmemleak), it is fine to call it from free_init_pages() even if not all address ranges passed to this function are known to kmemleak. [ bp: Massage. ] Fixes: b3f0907c71e0 ("x86/mm: Add .bss..decrypted section to hold shared variables") Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190423165811.36699-1-cai@lca.pw
2019-04-24 00:58:11 +08:00
/*
* Inform kmemleak about the hole in the memory since the
* corresponding pages will be unmapped.
*/
kmemleak_free_part((void *)begin, end - begin);
set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
} else {
/*
* We just marked the kernel text read only above, now that
* we are going to free part of that, we need to make that
* writeable and non-executable first.
*/
set_memory_nx(begin, (end - begin) >> PAGE_SHIFT);
set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
free_reserved_area((void *)begin, (void *)end,
POISON_FREE_INITMEM, what);
}
}
/*
* begin/end can be in the direct map or the "high kernel mapping"
* used for the kernel image only. free_init_pages() will do the
* right thing for either kind of address.
*/
void free_kernel_image_pages(void *begin, void *end)
{
x86/mm/init: Remove freed kernel image areas from alias mapping The kernel image is mapped into two places in the virtual address space (addresses without KASLR, of course): 1. The kernel direct map (0xffff880000000000) 2. The "high kernel map" (0xffffffff81000000) We actually execute out of #2. If we get the address of a kernel symbol, it points to #2, but almost all physical-to-virtual translations point to Parts of the "high kernel map" alias are mapped in the userspace page tables with the Global bit for performance reasons. The parts that we map to userspace do not (er, should not) have secrets. When PTI is enabled then the global bit is usually not set in the high mapping and just used to compensate for poor performance on systems which lack PCID. This is fine, except that some areas in the kernel image that are adjacent to the non-secret-containing areas are unused holes. We free these holes back into the normal page allocator and reuse them as normal kernel memory. The memory will, of course, get *used* via the normal map, but the alias mapping is kept. This otherwise unused alias mapping of the holes will, by default keep the Global bit, be mapped out to userspace, and be vulnerable to Meltdown. Remove the alias mapping of these pages entirely. This is likely to fracture the 2M page mapping the kernel image near these areas, but this should affect a minority of the area. The pageattr code changes *all* aliases mapping the physical pages that it operates on (by default). We only want to modify a single alias, so we need to tweak its behavior. This unmapping behavior is currently dependent on PTI being in place. Going forward, we should at least consider doing this for all configurations. Having an extra read-write alias for memory is not exactly ideal for debugging things like random memory corruption and this does undercut features like DEBUG_PAGEALLOC or future work like eXclusive Page Frame Ownership (XPFO). Before this patch: current_kernel:---[ High Kernel Mapping ]--- current_kernel-0xffffffff80000000-0xffffffff81000000 16M pmd current_kernel-0xffffffff81000000-0xffffffff81e00000 14M ro PSE GLB x pmd current_kernel-0xffffffff81e00000-0xffffffff81e11000 68K ro GLB x pte current_kernel-0xffffffff81e11000-0xffffffff82000000 1980K RW NX pte current_kernel-0xffffffff82000000-0xffffffff82600000 6M ro PSE GLB NX pmd current_kernel-0xffffffff82600000-0xffffffff82c00000 6M RW PSE NX pmd current_kernel-0xffffffff82c00000-0xffffffff82e00000 2M RW NX pte current_kernel-0xffffffff82e00000-0xffffffff83200000 4M RW PSE NX pmd current_kernel-0xffffffff83200000-0xffffffffa0000000 462M pmd current_user:---[ High Kernel Mapping ]--- current_user-0xffffffff80000000-0xffffffff81000000 16M pmd current_user-0xffffffff81000000-0xffffffff81e00000 14M ro PSE GLB x pmd current_user-0xffffffff81e00000-0xffffffff81e11000 68K ro GLB x pte current_user-0xffffffff81e11000-0xffffffff82000000 1980K RW NX pte current_user-0xffffffff82000000-0xffffffff82600000 6M ro PSE GLB NX pmd current_user-0xffffffff82600000-0xffffffffa0000000 474M pmd After this patch: current_kernel:---[ High Kernel Mapping ]--- current_kernel-0xffffffff80000000-0xffffffff81000000 16M pmd current_kernel-0xffffffff81000000-0xffffffff81e00000 14M ro PSE GLB x pmd current_kernel-0xffffffff81e00000-0xffffffff81e11000 68K ro GLB x pte current_kernel-0xffffffff81e11000-0xffffffff82000000 1980K pte current_kernel-0xffffffff82000000-0xffffffff82400000 4M ro PSE GLB NX pmd current_kernel-0xffffffff82400000-0xffffffff82488000 544K ro NX pte current_kernel-0xffffffff82488000-0xffffffff82600000 1504K pte current_kernel-0xffffffff82600000-0xffffffff82c00000 6M RW PSE NX pmd current_kernel-0xffffffff82c00000-0xffffffff82c0d000 52K RW NX pte current_kernel-0xffffffff82c0d000-0xffffffff82dc0000 1740K pte current_user:---[ High Kernel Mapping ]--- current_user-0xffffffff80000000-0xffffffff81000000 16M pmd current_user-0xffffffff81000000-0xffffffff81e00000 14M ro PSE GLB x pmd current_user-0xffffffff81e00000-0xffffffff81e11000 68K ro GLB x pte current_user-0xffffffff81e11000-0xffffffff82000000 1980K pte current_user-0xffffffff82000000-0xffffffff82400000 4M ro PSE GLB NX pmd current_user-0xffffffff82400000-0xffffffff82488000 544K ro NX pte current_user-0xffffffff82488000-0xffffffff82600000 1504K pte current_user-0xffffffff82600000-0xffffffffa0000000 474M pmd [ tglx: Do not unmap on 32bit as there is only one mapping ] Fixes: 0f561fce4d69 ("x86/pti: Enable global pages for shared areas") Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20180802225831.5F6A2BFC@viggo.jf.intel.com
2018-08-03 06:58:31 +08:00
unsigned long begin_ul = (unsigned long)begin;
unsigned long end_ul = (unsigned long)end;
unsigned long len_pages = (end_ul - begin_ul) >> PAGE_SHIFT;
free_init_pages("unused kernel image", begin_ul, end_ul);
/*
* PTI maps some of the kernel into userspace. For performance,
* this includes some kernel areas that do not contain secrets.
* Those areas might be adjacent to the parts of the kernel image
* being freed, which may contain secrets. Remove the "high kernel
* image mapping" for these freed areas, ensuring they are not even
* potentially vulnerable to Meltdown regardless of the specific
* optimizations PTI is currently using.
*
* The "noalias" prevents unmapping the direct map alias which is
* needed to access the freed pages.
*
* This is only valid for 64bit kernels. 32bit has only one mapping
* which can't be treated in this way for obvious reasons.
*/
if (IS_ENABLED(CONFIG_X86_64) && cpu_feature_enabled(X86_FEATURE_PTI))
set_memory_np_noalias(begin_ul, len_pages);
}
x86/mm: Add .bss..decrypted section to hold shared variables kvmclock defines few static variables which are shared with the hypervisor during the kvmclock initialization. When SEV is active, memory is encrypted with a guest-specific key, and if the guest OS wants to share the memory region with the hypervisor then it must clear the C-bit before sharing it. Currently, we use kernel_physical_mapping_init() to split large pages before clearing the C-bit on shared pages. But it fails when called from the kvmclock initialization (mainly because the memblock allocator is not ready that early during boot). Add a __bss_decrypted section attribute which can be used when defining such shared variable. The so-defined variables will be placed in the .bss..decrypted section. This section will be mapped with C=0 early during boot. The .bss..decrypted section has a big chunk of memory that may be unused when memory encryption is not active, free it when memory encryption is not active. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Radim Krčmář<rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:58 +08:00
void __weak mem_encrypt_free_decrypted_mem(void) { }
x86/e820: Use much less memory for e820/e820_saved, save up to 120k The maximum size of e820 map array for EFI systems is defined as E820_X_MAX (E820MAX + 3 * MAX_NUMNODES). In x86_64 defconfig, this ends up with E820_X_MAX = 320, e820 and e820_saved are 6404 bytes each. With larger configs, for example Fedora kernels, E820_X_MAX = 3200, e820 and e820_saved are 64004 bytes each. Most of this space is wasted. Typical machines have some 20-30 e820 areas at most. After previous patch, e820 and e820_saved are pointers to e280 maps. Change them to initially point to maps which are __initdata. At the very end of kernel init, just before __init[data] sections are freed in free_initmem(), allocate smaller blocks, copy maps there, and change pointers. The late switch makes sure that all functions which can be used to change e820 maps are no longer accessible (they are all __init functions). Run-tested. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20160918182125.21000-1-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-19 02:21:25 +08:00
void __ref free_initmem(void)
{
e820__reallocate_tables();
x86/mm: Add .bss..decrypted section to hold shared variables kvmclock defines few static variables which are shared with the hypervisor during the kvmclock initialization. When SEV is active, memory is encrypted with a guest-specific key, and if the guest OS wants to share the memory region with the hypervisor then it must clear the C-bit before sharing it. Currently, we use kernel_physical_mapping_init() to split large pages before clearing the C-bit on shared pages. But it fails when called from the kvmclock initialization (mainly because the memblock allocator is not ready that early during boot). Add a __bss_decrypted section attribute which can be used when defining such shared variable. The so-defined variables will be placed in the .bss..decrypted section. This section will be mapped with C=0 early during boot. The .bss..decrypted section has a big chunk of memory that may be unused when memory encryption is not active, free it when memory encryption is not active. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Radim Krčmář<rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Link: https://lkml.kernel.org/r/1536932759-12905-2-git-send-email-brijesh.singh@amd.com
2018-09-14 21:45:58 +08:00
mem_encrypt_free_decrypted_mem();
free_kernel_image_pages(&__init_begin, &__init_end);
}
#ifdef CONFIG_BLK_DEV_INITRD
void __init free_initrd_mem(unsigned long start, unsigned long end)
{
x86: Make sure free_init_pages() frees pages on page boundary When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 10:42:55 +08:00
/*
* end could be not aligned, and We can not align that,
* decompresser could be confused by aligned initrd_end
* We already reserve the end partial page before in
* - i386_start_kernel()
* - x86_64_start_kernel()
* - relocate_initrd()
* So here We can do PAGE_ALIGN() safely to get partial page to be freed
*/
free_init_pages("initrd", start, PAGE_ALIGN(end));
}
#endif
x86/boot/e820: Move the memblock_find_dma_reserve() function and rename it to memblock_set_dma_reserve() We introduced memblock_find_dma_reserve() in this commit: 6f2a75369e75 x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve But there's several problems with it: - The changelog is full of typos and is incomprehensible in general, and the comments in the code are not much better either. - The function was inexplicably placed into e820.c, while it has very little connection to the E820 table: when we call memblock_find_dma_reserve() then memblock is already set up and we are not using the E820 table anymore. - The function is a wrapper around set_dma_reserve(), but changed the 'set' name to 'find' - actively misleading about its primary purpose, which is still to set the DMA-reserve value. - The function is limited to 64-bit systems, but neither the changelog nor the comments explain why. The change would appear to be relevant to 32-bit systems as well, as the ISA DMA zone is the first 16 MB of RAM. So address some of these problems: - Move it into arch/x86/mm/init.c, next to the other zone setup related functions. - Clean up the code flow and names of local variables a bit. - Rename it to memblock_set_dma_reserve() - Improve the comments. No change in functionality. Enabling it for 32-bit systems is left for a separate patch. Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Jackson <pj@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 19:45:40 +08:00
/*
* Calculate the precise size of the DMA zone (first 16 MB of RAM),
* and pass it to the MM layer - to help it set zone watermarks more
* accurately.
*
* Done on 64-bit systems only for the time being, although 32-bit systems
* might benefit from this as well.
*/
void __init memblock_find_dma_reserve(void)
{
#ifdef CONFIG_X86_64
u64 nr_pages = 0, nr_free_pages = 0;
unsigned long start_pfn, end_pfn;
phys_addr_t start_addr, end_addr;
int i;
u64 u;
/*
* Iterate over all memory ranges (free and reserved ones alike),
* to calculate the total number of pages in the first 16 MB of RAM:
*/
nr_pages = 0;
for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
start_pfn = min(start_pfn, MAX_DMA_PFN);
end_pfn = min(end_pfn, MAX_DMA_PFN);
nr_pages += end_pfn - start_pfn;
}
/*
* Iterate over free memory ranges to calculate the number of free
* pages in the DMA zone, while not counting potential partial
* pages at the beginning or the end of the range:
*/
nr_free_pages = 0;
for_each_free_mem_range(u, NUMA_NO_NODE, MEMBLOCK_NONE, &start_addr, &end_addr, NULL) {
start_pfn = min_t(unsigned long, PFN_UP(start_addr), MAX_DMA_PFN);
end_pfn = min_t(unsigned long, PFN_DOWN(end_addr), MAX_DMA_PFN);
if (start_pfn < end_pfn)
nr_free_pages += end_pfn - start_pfn;
}
set_dma_reserve(nr_pages - nr_free_pages);
#endif
}
void __init zone_sizes_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_ZONE_DMA
x86/mm: Fix zone ranges boot printout This is the usual physical memory layout boot printout: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0xc3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xbf78ffff] [ 0.000000] node 0: [mem 0x100000000-0x63fffffff] [ 0.000000] node 1: [mem 0x640000000-0xc3fffffff] ... This is the log when we set "mem=2G" on the boot cmdline: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] // should be 0x7fffffff, right? [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7fffffff] ... This patch fixes the printout, the following log shows the right ranges: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0x7fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7fffffff] ... Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Linux MM <linux-mm@kvack.org> Cc: <dave@sr71.net> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/5487AB3D.6070306@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-10 10:09:01 +08:00
max_zone_pfns[ZONE_DMA] = min(MAX_DMA_PFN, max_low_pfn);
#endif
#ifdef CONFIG_ZONE_DMA32
x86/mm: Fix zone ranges boot printout This is the usual physical memory layout boot printout: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0xc3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0xbf78ffff] [ 0.000000] node 0: [mem 0x100000000-0x63fffffff] [ 0.000000] node 1: [mem 0x640000000-0xc3fffffff] ... This is the log when we set "mem=2G" on the boot cmdline: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] // should be 0x7fffffff, right? [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7fffffff] ... This patch fixes the printout, the following log shows the right ranges: ... [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0x7fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x00099fff] [ 0.000000] node 0: [mem 0x00100000-0x7fffffff] ... Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Linux MM <linux-mm@kvack.org> Cc: <dave@sr71.net> Cc: Rik van Riel <riel@redhat.com> Link: http://lkml.kernel.org/r/5487AB3D.6070306@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-10 10:09:01 +08:00
max_zone_pfns[ZONE_DMA32] = min(MAX_DMA32_PFN, max_low_pfn);
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = max_pfn;
#endif
free_area_init_nodes(max_zone_pfns);
}
x86/mm: Use/Fix PCID to optimize user/kernel switches We can use PCID to retain the TLBs across CR3 switches; including those now part of the user/kernel switch. This increases performance of kernel entry/exit at the cost of more expensive/complicated TLB flushing. Now that we have two address spaces, one for kernel and one for user space, we need two PCIDs per mm. We use the top PCID bit to indicate a user PCID (just like we use the PFN LSB for the PGD). Since we do TLB invalidation from kernel space, the existing code will only invalidate the kernel PCID, we augment that by marking the corresponding user PCID invalid, and upon switching back to userspace, use a flushing CR3 write for the switch. In order to access the user_pcid_flush_mask we use PER_CPU storage, which means the previously established SWAPGS vs CR3 ordering is now mandatory and required. Having to do this memory access does require additional registers, most sites have a functioning stack and we can spill one (RAX), sites without functional stack need to otherwise provide the second scratch register. Note: PCID is generally available on Intel Sandybridge and later CPUs. Note: Up until this point TLB flushing was broken in this series. Based-on-code-from: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:59 +08:00
__visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = {
x86/mm: Rework lazy TLB to track the actual loaded mm Lazy TLB state is currently managed in a rather baroque manner. AFAICT, there are three possible states: - Non-lazy. This means that we're running a user thread or a kernel thread that has called use_mm(). current->mm == current->active_mm == cpu_tlbstate.active_mm and cpu_tlbstate.state == TLBSTATE_OK. - Lazy with user mm. We're running a kernel thread without an mm and we're borrowing an mm_struct. We have current->mm == NULL, current->active_mm == cpu_tlbstate.active_mm, cpu_tlbstate.state != TLBSTATE_OK (i.e. TLBSTATE_LAZY or 0). The current cpu is set in mm_cpumask(current->active_mm). CR3 points to current->active_mm->pgd. The TLB is up to date. - Lazy with init_mm. This happens when we call leave_mm(). We have current->mm == NULL, current->active_mm == cpu_tlbstate.active_mm, but that mm is only relelvant insofar as the scheduler is tracking it for refcounting. cpu_tlbstate.state != TLBSTATE_OK. The current cpu is clear in mm_cpumask(current->active_mm). CR3 points to swapper_pg_dir, i.e. init_mm->pgd. This patch simplifies the situation. Other than perf, x86 stops caring about current->active_mm at all. We have cpu_tlbstate.loaded_mm pointing to the mm that CR3 references. The TLB is always up to date for that mm. leave_mm() just switches us to init_mm. There are no longer any special cases for mm_cpumask, and switch_mm() switches mms without worrying about laziness. After this patch, cpu_tlbstate.state serves only to tell the TLB flush code whether it may switch to init_mm instead of doing a normal flush. This makes fairly extensive changes to xen_exit_mmap(), which used to look a bit like black magic. Perf is unchanged. With or without this change, perf may behave a bit erratically if it tries to read user memory in kernel thread context. We should build on this patch to teach perf to never look at user memory when cpu_tlbstate.loaded_mm != current->mm. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-29 01:00:15 +08:00
.loaded_mm = &init_mm,
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID PCID is a "process context ID" -- it's what other architectures call an address space ID. Every non-global TLB entry is tagged with a PCID, only TLB entries that match the currently selected PCID are used, and we can switch PGDs without flushing the TLB. x86's PCID is 12 bits. This is an unorthodox approach to using PCID. x86's PCID is far too short to uniquely identify a process, and we can't even really uniquely identify a running process because there are monster systems with over 4096 CPUs. To make matters worse, past attempts to use all 12 PCID bits have resulted in slowdowns instead of speedups. This patch uses PCID differently. We use a PCID to identify a recently-used mm on a per-cpu basis. An mm has no fixed PCID binding at all; instead, we give it a fresh PCID each time it's loaded except in cases where we want to preserve the TLB, in which case we reuse a recent value. Here are some benchmark results, done on a Skylake laptop at 2.3 GHz (turbo off, intel_pstate requesting max performance) under KVM with the guest using idle=poll (to avoid artifacts when bouncing between CPUs). I haven't done any real statistics here -- I just ran them in a loop and picked the fastest results that didn't look like outliers. Unpatched means commit a4eb8b993554, so all the bookkeeping overhead is gone. ping-pong between two mms on the same CPU using eventfd: patched: 1.22µs patched, nopcid: 1.33µs unpatched: 1.34µs Same ping-pong, but now touch 512 pages (all zero-page to minimize cache misses) each iteration. dTLB misses are measured by dtlb_load_misses.miss_causes_a_walk: patched: 1.8µs 11M dTLB misses patched, nopcid: 6.2µs, 207M dTLB misses unpatched: 6.1µs, 190M dTLB misses Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Nadav Amit <nadav.amit@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/9ee75f17a81770feed616358e6860d98a2a5b1e7.1500957502.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-25 12:41:38 +08:00
.next_asid = 1,
.cr4 = ~0UL, /* fail hard if we screw up cr4 shadow initialization */
};
EXPORT_PER_CPU_SYMBOL(cpu_tlbstate);
void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache)
{
/* entry 0 MUST be WB (hardwired to speed up translations) */
BUG_ON(!entry && cache != _PAGE_CACHE_MODE_WB);
__cachemode2pte_tbl[cache] = __cm_idx2pte(entry);
__pte2cachemode_tbl[entry] = cache;
}
#ifdef CONFIG_SWAP
unsigned long max_swapfile_size(void)
{
unsigned long pages;
pages = generic_max_swapfile_size();
if (boot_cpu_has_bug(X86_BUG_L1TF) && l1tf_mitigation != L1TF_MITIGATION_OFF) {
/* Limit the swap file size to MAX_PA/2 for L1TF workaround */
x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM Two users have reported [1] that they have an "extremely unlikely" system with more than MAX_PA/2 memory and L1TF mitigation is not effective. In fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to holes in the e820 map, the main region is almost 500MB over the 32GB limit: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable Suggestions to use 'mem=32G' to enable the L1TF mitigation while losing the 500MB revealed, that there's an off-by-one error in the check in l1tf_select_mitigation(). l1tf_pfn_limit() returns the last usable pfn (inclusive) and the range check in the mitigation path does not take this into account. Instead of amending the range check, make l1tf_pfn_limit() return the first PFN which is over the limit which is less error prone. Adjust the other users accordingly. [1] https://bugzilla.suse.com/show_bug.cgi?id=1105536 Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Reported-by: George Anchev <studio@anchev.net> Reported-by: Christopher Snowhill <kode54@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180823134418.17008-1-vbabka@suse.cz
2018-08-23 21:44:18 +08:00
unsigned long long l1tf_limit = l1tf_pfn_limit();
/*
* We encode swap offsets also with 3 bits below those for pfn
* which makes the usable limit higher.
*/
#if CONFIG_PGTABLE_LEVELS > 2
l1tf_limit <<= PAGE_SHIFT - SWP_OFFSET_FIRST_BIT;
#endif
pages = min_t(unsigned long long, l1tf_limit, pages);
}
return pages;
}
#endif