openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/mach-omap2/include/mach/debug-macro.S

166 lines
4.9 KiB
ArmAsm
Raw Normal View History

omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2 This also creates the include/mach subdirectories under mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 08:26:17 +08:00
/* arch/arm/mach-omap2/include/mach/debug-macro.S
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:48:53 +08:00
#include <linux/serial_reg.h>
#include <plat/serial.h>
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
omap_uart_lsr: .word 0
.popsection
/*
* Note that this code won't work if the bootloader passes
* a wrong machine ID number in r1. To debug, just hardcode
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
ARM: add an extra temp register to the low level debugging addruart macro Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 10:55:46 +08:00
.macro addruart, rp, rv, tmp
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
/* Use omap_uart_phys/virt if already configured */
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
10: adr \rp, 99f @ get effective addr of 99f
ldr \rv, [\rp] @ get absolute addr of 99f
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\tmp, #0] @ omap_uart_phys
ldr \rv, [\tmp, #4] @ omap_uart_virt
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
bne 100f @ already configured
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
omap: Use a memory address for storing the debug port info instead of UART1 scratchpad This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 08:39:19 +08:00
/* Check the debug UART configuration set in uncompress.h */
ARM: plat-omap: make OMAP_UART_INFO into a relative offset This is the first step to remove PLAT_PHYS_OFFSET usage from the debug UART code. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 01:57:37 +08:00
mov \rp, pc
ldr \rv, =OMAP_UART_INFO_OFS
and \rp, \rp, #0xff000000
ldr \rp, [\rp, \rv]
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
/* Select the UART to use based on the UART1 scratchpad value */
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #0 @ no port configured?
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 21f @ if none, try to use UART1
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 21f @ configure OMAP2/3/4UART1
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 22f @ configure OMAP2/3/4UART2
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #OMAP2UART3 @ only on 24xx
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 23f @ configure OMAP2UART3
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #OMAP3UART3 @ only on 34xx
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 33f @ configure OMAP3UART3
ARM: OMAP5: Add minimal support for OMAP5430 SOC OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and with an integrated L2 cache controller. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. Patch includes: - The machine specific headers and sources updates. - Platform header updates. - Minimum initialisation support for serial. - IO table init Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-06-05 18:51:32 +08:00
cmp \rp, #OMAP4UART3 @ only on 44xx/54xx
beq 43f @ configure OMAP4/5UART3
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #OMAP3UART4 @ only on 36xx
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 34f @ configure OMAP3UART4
ARM: OMAP5: Add minimal support for OMAP5430 SOC OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and with an integrated L2 cache controller. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. Patch includes: - The machine specific headers and sources updates. - Platform header updates. - Minimum initialisation support for serial. - IO table init Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-06-05 18:51:32 +08:00
cmp \rp, #OMAP4UART4 @ only on 44xx/54xx
beq 44f @ configure OMAP4/5UART4
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
beq 81f @ configure UART1
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
beq 82f @ configure UART2
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
beq 83f @ configure UART3
ARM: OMAP2+: am33xx: Add low level debugging support Add support for low level debugging on AM335X EVM (AM33XX family). Currently only support for UART1 console, which is used on AM335X EVM is added. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10 16:53:01 +08:00
cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different
beq 84f @ configure UART1
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
cmp \rp, #ZOOM_UART @ only on zoom2/3
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
beq 95f @ configure ZOOM_UART
/* Configure the UART offset from the phys/virt base */
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE)
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE)
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 98f
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
b 98f
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
b 98f
ARM: OMAP: TI81XX: Prepare for addition of TI814X support This patch updates existing macros, functions used for TI816X, to enable addition of other SoCs belonging to TI81XX family (e.g., TI814X). The approach taken is to use TI81XX/ti81xx for code/data going to be common across all TI81XX devices. cpu_is_ti81xx() is introduced to handle code common across TI81XX devices. In addition, ti8168_evm_map_io() is now replaced with ti81xx_map_io() and moved in mach-omap2/common.c as same will be used for TI814X and is not board specific. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 02:46:44 +08:00
83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
TI816X: Add low level debug support This patch adds support for low level debugging on TI816X boards. Currently the support for UART3 console on TI816X EVM is added. Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-16 01:36:17 +08:00
b 98f
ARM: OMAP2+: am33xx: Add low level debugging support Add support for low level debugging on AM335X EVM (AM33XX family). Currently only support for UART1 console, which is used on AM335X EVM is added. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10 16:53:01 +08:00
84: ldr \rp, =AM33XX_UART1_BASE
and \rp, \rp, #0x00ffffff
b 97f
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
95: ldr \rp, =ZOOM_UART_BASE
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #0] @ omap_uart_phys
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
ldr \rp, =ZOOM_UART_VIRT
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #4] @ omap_uart_virt
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #8] @ omap_uart_lsr
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 10b
ARM: OMAP2+: am33xx: Add low level debugging support Add support for low level debugging on AM335X EVM (AM33XX family). Currently only support for UART1 console, which is used on AM335X EVM is added. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10 16:53:01 +08:00
/* AM33XX: Store both phys and virt address for the uart */
97: add \rp, \rp, #0x44000000 @ phys base
str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x44000000 @ phys base
add \rp, \rp, #0xf9000000 @ virt base
str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
/* Store both phys and virt address for the uart */
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
98: add \rp, \rp, #0x48000000 @ phys base
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #0] @ omap_uart_phys
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #4] @ omap_uart_virt
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-07-06 18:30:06 +08:00
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
str \rp, [\tmp, #8] @ omap_uart_lsr
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:49:01 +08:00
b 10b
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
.align
99: .word .
.word omap_uart_phys
.ltorg
100: /* Pass the UART_LSR reg address */
ldr \tmp, [\tmp, #8] @ omap_uart_lsr
add \rp, \rp, \tmp
add \rv, \rv, \tmp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro senduart,rd,rx
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
bic \rx, \rx, #0xff @ get base (THR) reg address
strb \rd, [\rx] @ send lower byte of rd
orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
bic \rd, \rd, #(0xff << 24) @ restore original rd
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.endm
.macro busyuart,rd,rx
ARM: mach-omap2: clean up debug-macro.S This achieves two goals: 1) Get rid of omap_uart_v2p() and omap_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. There is a catch though: the busyuart macro needs to know where the LSR register is which might be at a different offset depending on the hardware. Given that this macro is given only two registers and that one of them must be preserved, the trick is to always pass the LSR register address around, and deduce the base address for the THR register by masking out the LSR offset in senduart instead. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Tested-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-09-01 12:48:04 +08:00
1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-16 00:48:53 +08:00
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bne 1001b
.endm
.macro waituart,rd,rx
.endm