openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c

526 lines
15 KiB
C
Raw Normal View History

qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
/* QLogic qed NIC Driver
qed*: Update to dual-license Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 19:57:00 +08:00
* Copyright (c) 2015-2017 QLogic Corporation
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
*
qed*: Update to dual-license Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01 19:57:00 +08:00
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and /or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
*/
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include "qed.h"
#include <linux/qed/qed_chain.h>
#include "qed_cxt.h"
qed: add support for dcbx. This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17 18:44:26 +08:00
#include "qed_dcbx.h"
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
#include "qed_hsi.h"
#include "qed_hw.h"
#include "qed_int.h"
#include "qed_reg_addr.h"
#include "qed_sp.h"
qed: Introduce VFs This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:14 +08:00
#include "qed_sriov.h"
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
int qed_sp_init_request(struct qed_hwfn *p_hwfn,
struct qed_spq_entry **pp_ent,
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 15:42:43 +08:00
u8 cmd, u8 protocol, struct qed_sp_init_data *p_data)
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
{
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
u32 opaque_cid = p_data->opaque_fid << 16 | p_data->cid;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
struct qed_spq_entry *p_ent = NULL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
int rc;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
if (!pp_ent)
return -ENOMEM;
rc = qed_spq_get_entry(p_hwfn, pp_ent);
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 15:42:43 +08:00
if (rc)
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
return rc;
p_ent = *pp_ent;
p_ent->elem.hdr.cid = cpu_to_le32(opaque_cid);
p_ent->elem.hdr.cmd_id = cmd;
p_ent->elem.hdr.protocol_id = protocol;
p_ent->priority = QED_SPQ_PRIORITY_NORMAL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
p_ent->comp_mode = p_data->comp_mode;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
p_ent->comp_done.done = 0;
switch (p_ent->comp_mode) {
case QED_SPQ_MODE_EBLOCK:
p_ent->comp_cb.cookie = &p_ent->comp_done;
break;
case QED_SPQ_MODE_BLOCK:
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
if (!p_data->p_comp_data)
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
return -EINVAL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
p_ent->comp_cb.cookie = p_data->p_comp_data->cookie;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
break;
case QED_SPQ_MODE_CB:
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
if (!p_data->p_comp_data)
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
p_ent->comp_cb.function = NULL;
else
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
p_ent->comp_cb = *p_data->p_comp_data;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
break;
default:
DP_NOTICE(p_hwfn, "Unknown SPQE completion mode %d\n",
p_ent->comp_mode);
return -EINVAL;
}
DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
"Initialized: CID %08x cmd %02x protocol %02x data_addr %lu comp_mode [%s]\n",
opaque_cid, cmd, protocol,
(unsigned long)&p_ent->ramrod,
D_TRINE(p_ent->comp_mode, QED_SPQ_MODE_EBLOCK,
QED_SPQ_MODE_BLOCK, "MODE_EBLOCK", "MODE_BLOCK",
"MODE_CB"));
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
memset(&p_ent->ramrod, 0, sizeof(p_ent->ramrod));
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
return 0;
}
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static enum tunnel_clss qed_tunn_clss_to_fw_clss(u8 type)
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
{
switch (type) {
case QED_TUNN_CLSS_MAC_VLAN:
return TUNNEL_CLSS_MAC_VLAN;
case QED_TUNN_CLSS_MAC_VNI:
return TUNNEL_CLSS_MAC_VNI;
case QED_TUNN_CLSS_INNER_MAC_VLAN:
return TUNNEL_CLSS_INNER_MAC_VLAN;
case QED_TUNN_CLSS_INNER_MAC_VNI:
return TUNNEL_CLSS_INNER_MAC_VNI;
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
case QED_TUNN_CLSS_MAC_VLAN_DUAL_STAGE:
return TUNNEL_CLSS_MAC_VLAN_DUAL_STAGE;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
default:
return TUNNEL_CLSS_MAC_VLAN;
}
}
static void
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_pf_update_tunn_mode(struct qed_tunnel_info *p_tun,
struct qed_tunnel_info *p_src, bool b_pf_start)
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
{
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->vxlan.b_update_mode || b_pf_start)
p_tun->vxlan.b_mode_enabled = p_src->vxlan.b_mode_enabled;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->l2_gre.b_update_mode || b_pf_start)
p_tun->l2_gre.b_mode_enabled = p_src->l2_gre.b_mode_enabled;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->ip_gre.b_update_mode || b_pf_start)
p_tun->ip_gre.b_mode_enabled = p_src->ip_gre.b_mode_enabled;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->l2_geneve.b_update_mode || b_pf_start)
p_tun->l2_geneve.b_mode_enabled =
p_src->l2_geneve.b_mode_enabled;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->ip_geneve.b_update_mode || b_pf_start)
p_tun->ip_geneve.b_mode_enabled =
p_src->ip_geneve.b_mode_enabled;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
}
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void qed_set_tunn_cls_info(struct qed_tunnel_info *p_tun,
struct qed_tunnel_info *p_src)
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
{
enum tunnel_clss type;
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
p_tun->b_update_rx_cls = p_src->b_update_rx_cls;
p_tun->b_update_tx_cls = p_src->b_update_tx_cls;
type = qed_tunn_clss_to_fw_clss(p_src->vxlan.tun_cls);
p_tun->vxlan.tun_cls = type;
type = qed_tunn_clss_to_fw_clss(p_src->l2_gre.tun_cls);
p_tun->l2_gre.tun_cls = type;
type = qed_tunn_clss_to_fw_clss(p_src->ip_gre.tun_cls);
p_tun->ip_gre.tun_cls = type;
type = qed_tunn_clss_to_fw_clss(p_src->l2_geneve.tun_cls);
p_tun->l2_geneve.tun_cls = type;
type = qed_tunn_clss_to_fw_clss(p_src->ip_geneve.tun_cls);
p_tun->ip_geneve.tun_cls = type;
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void qed_set_tunn_ports(struct qed_tunnel_info *p_tun,
struct qed_tunnel_info *p_src)
{
p_tun->geneve_port.b_update_port = p_src->geneve_port.b_update_port;
p_tun->vxlan_port.b_update_port = p_src->vxlan_port.b_update_port;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->geneve_port.b_update_port)
p_tun->geneve_port.port = p_src->geneve_port.port;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_src->vxlan_port.b_update_port)
p_tun->vxlan_port.port = p_src->vxlan_port.port;
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void
__qed_set_ramrod_tunnel_param(u8 *p_tunn_cls, u8 *p_enable_tx_clas,
struct qed_tunn_update_type *tun_type)
{
*p_tunn_cls = tun_type->tun_cls;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (tun_type->b_mode_enabled)
*p_enable_tx_clas = 1;
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void
qed_set_ramrod_tunnel_param(u8 *p_tunn_cls, u8 *p_enable_tx_clas,
struct qed_tunn_update_type *tun_type,
u8 *p_update_port, __le16 *p_port,
struct qed_tunn_update_udp_port *p_udp_port)
{
__qed_set_ramrod_tunnel_param(p_tunn_cls, p_enable_tx_clas, tun_type);
if (p_udp_port->b_update_port) {
*p_update_port = 1;
*p_port = cpu_to_le16(p_udp_port->port);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
}
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void
qed_tunn_set_pf_update_params(struct qed_hwfn *p_hwfn,
struct qed_tunnel_info *p_src,
struct pf_update_tunnel_config *p_tunn_cfg)
{
struct qed_tunnel_info *p_tun = &p_hwfn->cdev->tunnel;
qed_set_pf_update_tunn_mode(p_tun, p_src, false);
qed_set_tunn_cls_info(p_tun, p_src);
qed_set_tunn_ports(p_tun, p_src);
qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_vxlan,
&p_tunn_cfg->tx_enable_vxlan,
&p_tun->vxlan,
&p_tunn_cfg->set_vxlan_udp_port_flg,
&p_tunn_cfg->vxlan_udp_port,
&p_tun->vxlan_port);
qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_l2geneve,
&p_tunn_cfg->tx_enable_l2geneve,
&p_tun->l2_geneve,
&p_tunn_cfg->set_geneve_udp_port_flg,
&p_tunn_cfg->geneve_udp_port,
&p_tun->geneve_port);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_ipgeneve,
&p_tunn_cfg->tx_enable_ipgeneve,
&p_tun->ip_geneve);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_l2gre,
&p_tunn_cfg->tx_enable_l2gre,
&p_tun->l2_gre);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_ipgre,
&p_tunn_cfg->tx_enable_ipgre,
&p_tun->ip_gre);
p_tunn_cfg->update_rx_pf_clss = p_tun->b_update_rx_cls;
p_tunn_cfg->update_tx_pf_clss = p_tun->b_update_tx_cls;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
}
static void qed_set_hw_tunn_mode(struct qed_hwfn *p_hwfn,
struct qed_ptt *p_ptt,
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
struct qed_tunnel_info *p_tun)
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
{
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_gre_enable(p_hwfn, p_ptt, p_tun->l2_gre.b_mode_enabled,
p_tun->ip_gre.b_mode_enabled);
qed_set_vxlan_enable(p_hwfn, p_ptt, p_tun->vxlan.b_mode_enabled);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_geneve_enable(p_hwfn, p_ptt, p_tun->l2_geneve.b_mode_enabled,
p_tun->ip_geneve.b_mode_enabled);
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
static void qed_set_hw_tunn_mode_port(struct qed_hwfn *p_hwfn,
struct qed_tunnel_info *p_tunn)
{
if (p_tunn->vxlan_port.b_update_port)
qed_set_vxlan_dest_port(p_hwfn, p_hwfn->p_main_ptt,
p_tunn->vxlan_port.port);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_tunn->geneve_port.b_update_port)
qed_set_geneve_dest_port(p_hwfn, p_hwfn->p_main_ptt,
p_tunn->geneve_port.port);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_hw_tunn_mode(p_hwfn, p_hwfn->p_main_ptt, p_tunn);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
}
static void
qed_tunn_set_pf_start_params(struct qed_hwfn *p_hwfn,
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
struct qed_tunnel_info *p_src,
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
struct pf_start_tunnel_config *p_tunn_cfg)
{
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
struct qed_tunnel_info *p_tun = &p_hwfn->cdev->tunnel;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
if (!p_src)
return;
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_pf_update_tunn_mode(p_tun, p_src, true);
qed_set_tunn_cls_info(p_tun, p_src);
qed_set_tunn_ports(p_tun, p_src);
qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_vxlan,
&p_tunn_cfg->tx_enable_vxlan,
&p_tun->vxlan,
&p_tunn_cfg->set_vxlan_udp_port_flg,
&p_tunn_cfg->vxlan_udp_port,
&p_tun->vxlan_port);
qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_l2geneve,
&p_tunn_cfg->tx_enable_l2geneve,
&p_tun->l2_geneve,
&p_tunn_cfg->set_geneve_udp_port_flg,
&p_tunn_cfg->geneve_udp_port,
&p_tun->geneve_port);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_ipgeneve,
&p_tunn_cfg->tx_enable_ipgeneve,
&p_tun->ip_geneve);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_l2gre,
&p_tunn_cfg->tx_enable_l2gre,
&p_tun->l2_gre);
__qed_set_ramrod_tunnel_param(&p_tunn_cfg->tunnel_clss_ipgre,
&p_tunn_cfg->tx_enable_ipgre,
&p_tun->ip_gre);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
}
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
struct qed_tunnel_info *p_tunn,
qed*: Tx-switching configuration Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:25 +08:00
enum qed_mf_mode mode, bool allow_npar_tx_switch)
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
{
struct pf_start_ramrod_data *p_ramrod = NULL;
u16 sb = qed_int_get_sp_sb_id(p_hwfn);
u8 sb_index = p_hwfn->p_eq->eq_sb_index;
struct qed_spq_entry *p_ent = NULL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
struct qed_sp_init_data init_data;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
int rc = -EINVAL;
qed: Revisit chain implementation RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03 19:35:32 +08:00
u8 page_cnt;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
/* update initial eq producer */
qed_eq_prod_update(p_hwfn,
qed_chain_get_prod_idx(&p_hwfn->p_eq->chain));
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
memset(&init_data, 0, sizeof(init_data));
init_data.cid = qed_spq_get_cid(p_hwfn);
init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
init_data.comp_mode = QED_SPQ_MODE_EBLOCK;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
rc = qed_sp_init_request(p_hwfn, &p_ent,
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
COMMON_RAMROD_PF_START,
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 15:42:43 +08:00
PROTOCOLID_COMMON, &init_data);
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
if (rc)
return rc;
p_ramrod = &p_ent->ramrod.pf_start;
p_ramrod->event_ring_sb_id = cpu_to_le16(sb);
p_ramrod->event_ring_sb_index = sb_index;
p_ramrod->path_id = QED_PATH_ID(p_hwfn);
p_ramrod->dont_log_ramrods = 0;
p_ramrod->log_type_mask = cpu_to_le16(0xf);
qed: Utilize FW 8.10.3.0 The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02 15:23:29 +08:00
qed/qede: use 8.7.3.0 FW. This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16 02:22:35 +08:00
switch (mode) {
case QED_MF_DEFAULT:
case QED_MF_NPAR:
p_ramrod->mf_mode = MF_NPAR;
break;
case QED_MF_OVLAN:
p_ramrod->mf_mode = MF_OVLAN;
break;
default:
DP_NOTICE(p_hwfn, "Unsupported MF mode, init as DEFAULT\n");
p_ramrod->mf_mode = MF_NPAR;
}
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
p_ramrod->outer_tag = p_hwfn->hw_info.ovlan;
/* Place EQ address in RAMROD */
qed: Introduce DMA_REGPAIR_LE FW hsi contains regpairs, mostly for 64-bit address representations. Since same paradigm is applied each time a regpair is filled, this introduces a new utility macro for setting such regpairs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:10 +08:00
DMA_REGPAIR_LE(p_ramrod->event_ring_pbl_addr,
qed: Optimize qed_chain datapath usage The chain structure and functions are widely used by the qed* modules, both for configuration and datapath. E.g., qede's Tx has one such chain and its Rx has two. Currently, the strucutre's fields which are required for datapath related functions [produce/consume] are intertwined with fields which are required only for configuration purposes [init/destroy/etc.]. This patch re-arranges the chain structure so that all the fields which are required for datapath usage could reside in a single cacheline instead of the two which are required today. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 22:47:01 +08:00
p_hwfn->p_eq->chain.pbl_sp.p_phys_table);
qed: Revisit chain implementation RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03 19:35:32 +08:00
page_cnt = (u8)qed_chain_get_page_cnt(&p_hwfn->p_eq->chain);
p_ramrod->event_ring_num_pages = page_cnt;
qed: Introduce DMA_REGPAIR_LE FW hsi contains regpairs, mostly for 64-bit address representations. Since same paradigm is applied each time a regpair is filled, this introduces a new utility macro for setting such regpairs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:10 +08:00
DMA_REGPAIR_LE(p_ramrod->consolid_q_pbl_addr,
qed: Optimize qed_chain datapath usage The chain structure and functions are widely used by the qed* modules, both for configuration and datapath. E.g., qede's Tx has one such chain and its Rx has two. Currently, the strucutre's fields which are required for datapath related functions [produce/consume] are intertwined with fields which are required only for configuration purposes [init/destroy/etc.]. This patch re-arranges the chain structure so that all the fields which are required for datapath usage could reside in a single cacheline instead of the two which are required today. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 22:47:01 +08:00
p_hwfn->p_consq->chain.pbl_sp.p_phys_table);
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 15:42:43 +08:00
qed_tunn_set_pf_start_params(p_hwfn, p_tunn, &p_ramrod->tunnel_config);
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
qed*: Tx-switching configuration Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:25 +08:00
if (IS_MF_SI(p_hwfn))
p_ramrod->allow_npar_tx_switching = allow_npar_tx_switch;
qed: Add iscsi/rdma personalities This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03 19:35:34 +08:00
switch (p_hwfn->hw_info.personality) {
case QED_PCI_ETH:
p_ramrod->personality = PERSONALITY_ETH;
break;
qed: Add support for hardware offloaded FCoE. This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15 22:28:22 +08:00
case QED_PCI_FCOE:
p_ramrod->personality = PERSONALITY_FCOE;
break;
qed: Add iscsi/rdma personalities This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03 19:35:34 +08:00
case QED_PCI_ISCSI:
p_ramrod->personality = PERSONALITY_ISCSI;
break;
case QED_PCI_ETH_ROCE:
p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
break;
default:
treewide: Fix printk() message errors This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-09-17 22:44:17 +08:00
DP_NOTICE(p_hwfn, "Unknown personality %d\n",
qed: Add iscsi/rdma personalities This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-03 19:35:34 +08:00
p_hwfn->hw_info.personality);
p_ramrod->personality = PERSONALITY_ETH;
}
qed: Introduce VFs This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:14 +08:00
if (p_hwfn->cdev->p_iov_info) {
struct qed_hw_sriov_info *p_iov = p_hwfn->cdev->p_iov_info;
p_ramrod->base_vf_id = (u8) p_iov->first_vf_in_pf;
p_ramrod->num_vfs = (u8) p_iov->total_vfs;
}
qed: Utilize FW 8.10.3.0 The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-02 15:23:29 +08:00
p_ramrod->hsi_fp_ver.major_ver_arr[ETH_VER_KEY] = ETH_HSI_VER_MAJOR;
p_ramrod->hsi_fp_ver.minor_ver_arr[ETH_VER_KEY] = ETH_HSI_VER_MINOR;
qed: Introduce VFs This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11 21:36:14 +08:00
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
DP_VERBOSE(p_hwfn, QED_MSG_SPQ,
qed/qede: use 8.7.3.0 FW. This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16 02:22:35 +08:00
"Setting event_ring_sb [id %04x index %02x], outer_tag [%d]\n",
qed*: Semantic changes Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15 15:42:43 +08:00
sb, sb_index, p_ramrod->outer_tag);
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
qed: Apply tunnel configurations after PF start Configure and enable various tunnels on the adapter after PF start. This change was missed as a part of 'commit 464f664501816ef5fbbc00b8de96f4ae5a1c9325 ("qed: Add infrastructure support for tunneling")' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 18:16:04 +08:00
rc = qed_spq_post(p_hwfn, p_ent, NULL);
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (p_tunn)
qed_set_hw_tunn_mode_port(p_hwfn, &p_hwfn->cdev->tunnel);
qed: Apply tunnel configurations after PF start Configure and enable various tunnels on the adapter after PF start. This change was missed as a part of 'commit 464f664501816ef5fbbc00b8de96f4ae5a1c9325 ("qed: Add infrastructure support for tunneling")' Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <yuval.mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 18:16:04 +08:00
return rc;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
}
qed: add support for dcbx. This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17 18:44:26 +08:00
int qed_sp_pf_update(struct qed_hwfn *p_hwfn)
{
struct qed_spq_entry *p_ent = NULL;
struct qed_sp_init_data init_data;
int rc = -EINVAL;
/* Get SPQ entry */
memset(&init_data, 0, sizeof(init_data));
init_data.cid = qed_spq_get_cid(p_hwfn);
init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
init_data.comp_mode = QED_SPQ_MODE_CB;
rc = qed_sp_init_request(p_hwfn, &p_ent,
COMMON_RAMROD_PF_UPDATE, PROTOCOLID_COMMON,
&init_data);
if (rc)
return rc;
qed_dcbx_set_pf_update_params(&p_hwfn->p_dcbx_info->results,
&p_ent->ramrod.pf_update);
return qed_spq_post(p_hwfn, p_ent, NULL);
}
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
/* Set pf update ramrod command params */
int qed_sp_pf_update_tunn_cfg(struct qed_hwfn *p_hwfn,
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
struct qed_tunnel_info *p_tunn,
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
enum spq_mode comp_mode,
struct qed_spq_comp_cb *p_comp_data)
{
struct qed_spq_entry *p_ent = NULL;
struct qed_sp_init_data init_data;
int rc = -EINVAL;
qed - VF tunnelling support [VXLAN/GENEVE/GRE] This patch adds hardware channel APIs support between VF and PF for tunnelling configuration for the VFs. According to that configuration VFs can run VXLAN/GENEVE/GRE tunnels over it with tunnel features offloaded. Using these APIs VF can also request for UDP ports configuration to the PF, although PF and it's child VFs share the same port. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:49 +08:00
if (IS_VF(p_hwfn->cdev))
return qed_vf_pf_tunnel_param_update(p_hwfn, p_tunn);
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
if (!p_tunn)
return -EINVAL;
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
/* Get SPQ entry */
memset(&init_data, 0, sizeof(init_data));
init_data.cid = qed_spq_get_cid(p_hwfn);
init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
init_data.comp_mode = comp_mode;
init_data.p_comp_data = p_comp_data;
rc = qed_sp_init_request(p_hwfn, &p_ent,
COMMON_RAMROD_PF_UPDATE, PROTOCOLID_COMMON,
&init_data);
if (rc)
return rc;
qed_tunn_set_pf_update_params(p_hwfn, p_tunn,
&p_ent->ramrod.pf_update.tunnel_config);
rc = qed_spq_post(p_hwfn, p_ent, NULL);
if (rc)
return rc;
qed: refactor tunnelling - API/Structs This patch changes the tunnel APIs to use per tunnel info instead of using bitmasks for all tunnels and also uses single struct to hold the data to prepare multiple variant of tunnel configuration ramrods to be sent to the hardware. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25 01:00:44 +08:00
qed_set_hw_tunn_mode_port(p_hwfn, &p_hwfn->cdev->tunnel);
qed: Add infrastructure support for tunneling This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 13:38:29 +08:00
return rc;
}
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
int qed_sp_pf_stop(struct qed_hwfn *p_hwfn)
{
struct qed_spq_entry *p_ent = NULL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
struct qed_sp_init_data init_data;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
int rc = -EINVAL;
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
/* Get SPQ entry */
memset(&init_data, 0, sizeof(init_data));
init_data.cid = qed_spq_get_cid(p_hwfn);
init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
init_data.comp_mode = QED_SPQ_MODE_EBLOCK;
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
rc = qed_sp_init_request(p_hwfn, &p_ent,
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
COMMON_RAMROD_PF_STOP, PROTOCOLID_COMMON,
qed: Change metadata needed for SPQ entries Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21 17:40:09 +08:00
&init_data);
qed: Add module with basic common support The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26 17:02:25 +08:00
if (rc)
return rc;
return qed_spq_post(p_hwfn, p_ent, NULL);
}
qed: add infrastructure for device self tests. This patch adds the functionality and APIs needed for selftests. It adds the ability to configure the link-mode which is required for the implementation of loopback tests. It adds the APIs for clock test, register test, interrupt test and memory test. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29 08:20:52 +08:00
int qed_sp_heartbeat_ramrod(struct qed_hwfn *p_hwfn)
{
struct qed_spq_entry *p_ent = NULL;
struct qed_sp_init_data init_data;
int rc;
/* Get SPQ entry */
memset(&init_data, 0, sizeof(init_data));
init_data.cid = qed_spq_get_cid(p_hwfn);
init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
init_data.comp_mode = QED_SPQ_MODE_EBLOCK;
rc = qed_sp_init_request(p_hwfn, &p_ent,
COMMON_RAMROD_EMPTY, PROTOCOLID_COMMON,
&init_data);
if (rc)
return rc;
return qed_spq_post(p_hwfn, p_ent, NULL);
}