Merge tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts changes for omap variants for v5.3 This series of changes improves support for few boards: - configure another lcd type for logicpd torpedo devkit - a series of updates for am335x phytec boards - configure mmc card detect pin for am335x-baltos * tag 'omap-for-v5.3/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-baltos: add support for MMC1 CD pin ARM: dts: am335x-baltos: Fix PHY mode for ethernet ARM: dts: Add support for phyBOARD-REGOR-AM335x ARM: dts: am335x-pcm-953: Remove eth phy delay ARM: dts: am335x-pcm-953: Update user led names ARM: dts: am335x-phycore-som: Enable gpmc node in dts files ARM: dts: am335x-phycore-som: Add emmc node ARM: dts: am335x phytec boards: Remove regulator node ARM: dts: Add LCD type 28 support to LogicPD Torpedo DM3730 devkit Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19 06:25:29 -07:00 · 2019-06-19 06:25:29 -07:00 · 0164a087a6
parent 3aa45174e1 8f62581f82
commit 0164a087a6
13 changed files with 372 additions and 45 deletions
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@ -160,6 +160,9 @@ Boards:
 - AM335X phyCORE-AM335x: Development kit
  compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"

+- AM335x phyBOARD-REGOR: Single Board Computer
+  compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"
+
 - AM335X UC-8100-ME-T: Communication-centric industrial computing platform
  compatible = "moxa,uc-8100-me-t", "ti,am33xx";

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -748,6 +748,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
 	am335x-pocketbeagle.dtb \
+	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@ -33,6 +33,12 @@ AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_p
 			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@ -68,7 +74,13 @@ &cpsw_emac0 {
 };

 &cpsw_emac1 {
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@ -54,6 +54,12 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@ -110,7 +116,13 @@ fixed-link {
 };

 &cpsw_emac1 {
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@ -63,6 +63,11 @@ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mca
 		>;
 	};

+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
 };

 &uart1 {
@ -128,7 +133,7 @@ fixed-link {
 };

 &cpsw_emac1 {
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
@ -139,3 +144,9 @@ &dcan1 {

 	status = "okay";
 };
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@ -39,15 +39,13 @@ user_leds: user_leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;

-		green {
-			label = "green:user";
+		user-led0 {
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
 			default-state = "on";
 		};

-		yellow {
-			label = "yellow:user";
+		user-led1 {
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "gpio";
 			default-state = "on";
@ -138,22 +136,6 @@ &cpsw_emac1 {
 &davinci_mdio {
 	phy1: ethernet-phy@2 {
 		reg = <2>;
-
-		/* Register 260 (104h) – RGMII Clock and Control Pad Skew */
-		rxc-skew-ps = <1400>;
-		rxdv-skew-ps = <0>;
-		txc-skew-ps = <1400>;
-		txen-skew-ps = <0>;
-		/* Register 261 (105h) – RGMII RX Data Pad Skew */
-		rxd3-skew-ps = <0>;
-		rxd2-skew-ps = <0>;
-		rxd1-skew-ps = <0>;
-		rxd0-skew-ps = <0>;
-		/* Register 262 (106h) – RGMII TX Data Pad Skew */
-		txd3-skew-ps = <0>;
-		txd2-skew-ps = <0>;
-		txd1-skew-ps = <0>;
-		txd0-skew-ps = <0>;
 	};
 };

--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts
@ -13,6 +13,10 @@
 #include "am335x-pcm-953.dtsi"

 /* SoM */
+&gpmc {
+	status = "okay";
+};
+
 &i2c_eeprom {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@ -30,17 +30,13 @@ memory@80000000 {
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};

-	regulators {
-		compatible = "simple-bus";
-
-		vcc5v: fixedregulator0 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 };

@ -53,6 +49,33 @@ &sham {
 	status = "okay";
 };

+/* EMMC */
+&am33xx_pinmux {
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "disabled";
+};
+
 /* Ethernet */
 &am33xx_pinmux {
 	ethernet0_pins: pinmux_ethernet0 {
@ -167,7 +190,7 @@ &elm {
 };

 &gpmc {
-	status = "okay";
+	status = "disabled";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
--- a/arch/arm/boot/dts/am335x-regor-rdk.dts
+++ b/arch/arm/boot/dts/am335x-regor-rdk.dts
@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-REGOR";
+	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	vcc3v3: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user_leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		run_stop-led {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		error-led {
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+};
+
+/* User Leds */
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+		>;
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux_dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac {
+	slaves = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+	dual_emac = <1>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_gpios_pins>;
+
+	user_gpios_pins: pinmux_user_gpios {
+		pinctrl-single,pins = <
+			/* DIGIN 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
+			/* DIGOUT 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_rs485_pins>;
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
+
+/* USB */
+&cppi41dma {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@ -13,6 +13,10 @@
 #include "am335x-wega.dtsi"

 /* SoM */
+&gpmc {
+	status = "okay";
+};
+
 &i2c_eeprom {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@ -15,16 +15,12 @@ sound: sound_iface {
 		compatible = "ti,da830-evm-audio";
 	};

-	regulators {
-		compatible = "simple-bus";
-
-		vcc3v3: fixedregulator1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 };

--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+/*
+ * There are two types of 4.3" LCD, Type 15 and Type 28.
+ * By default, type 15 was used.  This device tree file
+ * uses the timing for the type 28 LCD
+ */
+
+#include "logicpd-torpedo-37xx-devkit.dts"
+
+&lcd0 {
+
+	label = "28";
+
+	panel-timing {
+		clock-frequency = <9000000>;
+		hactive = <480>;
+		vactive = <272>;
+		hfront-porch = <3>;
+		hback-porch = <2>;
+		hsync-len = <42>;
+		vback-porch = <3>;
+		vfront-porch = <2>;
+		vsync-len = <11>;
+		hsync-active = <1>;
+		vsync-active = <1>;
+		de-active = <1>;
+		pixelclk-active = <0>;
+	};
+};