mirror of https://gitee.com/openkylin/linux.git
Qualcomm ARM64 DT updates for v5.8
For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7DYUQbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWxgP/RgO73BTFzapqi2GO/lC Jsc/lE9gNpmkuM9kluPrYvDIdDjEgfAehajCmBgkk2nyJnmN0XWSyJWzrAHstaUd 6TKYww43mPtCjPH7mk18DCINTK0yVrrpdpbgy2FQm5/heCQFPsZFWtLPJ23t8wQn fBJV/JzHjzeaEKf97QPgdTILt/hPSob5PVSdVT+VDC9jp/vnVEAVlc6+58rsH5sZ eRsGeoA0hUuaKZb7vji8afzyQzjs8Qra+56yhP13eFOtR0Ww1UOvESLWHFzUI91T yx9qjEDqF4Rw44MWxAxRpwQUU06PiwcIO0Z4ziZ5/FCr+Tseo+yo21B59i+9p112 ihJsQNN18oxAAtyuzv+OxcD3+H7qODvxR0fCdeAWZajeP994P79I4Ddejs+V0KN2 SZmJQmn8Ba8zMPJA7EZAug1IFrNfJ/xOu6KAv6bXpUYc8a5vRyQNqKgBIokry3V+ SDDrHOxu3XhPGR6YmkorJ6EfWdOm1iPs/o5b2GkJZLww6Vd89tIbNsMIDlVCVWaO R0gImZcpJpO9CLmQvnfKmE9yozIoadCS6lkfaCKuGm+usi5uPFXJqE5AcJ+Yj3/4 fi+MksJOrVwKRpuxr2lMM4GpOVqo7yUZ1iCveNn/GAfw3OVtsef0zL4vk0o4gYvd Bg0AVo61nTwJ7ef/i8mdlLT8 =ds6R -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.8 For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. * tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits) arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges arm64: dts: qcom: sc7180: add IPA information arm64: dts: qcom: sc7180: Fix ETMv4 power management patch arm64: dts: qcom: sc7180: Add A618 gpu dt blob dt-bindings: arm-smmu: Add sc7180 compatible string arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi arm64: dts: qcom: msm8916: move gpu opp table to gpu node arm64: dts: qcom: msm8916: avoid using _ in node names arm64: dts: qcom: c630: Specify UFS device reset arm64: dts: qcom: c630: Add WiFi node arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel arm64: dts: qcom: db820c: Fix invalid pm8994 supplies arm64: dts: qcom: db820c: Add pmi8994 RPM regulators arm64: dts: qcom: msm8916: Disable coresight by default arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator arm64: dts: qcom: msm8916: Add blsp_i2c5 ... Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
1cb00f8c3b
|
|
@ -167,6 +167,7 @@ properties:
|
|||
- qcom,kryo260
|
||||
- qcom,kryo280
|
||||
- qcom,kryo385
|
||||
- qcom,kryo468
|
||||
- qcom,kryo485
|
||||
- qcom,scorpion
|
||||
|
||||
|
|
|
|||
|
|
@ -37,6 +37,8 @@ description: |
|
|||
msm8994
|
||||
msm8996
|
||||
sc7180
|
||||
sdm630
|
||||
sdm660
|
||||
sdm845
|
||||
|
||||
The 'board' element must be one of the following strings:
|
||||
|
|
@ -153,6 +155,11 @@ properties:
|
|||
- qcom,sc7180-idp
|
||||
- const: qcom,sc7180
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- xiaomi,lavender
|
||||
- const: qcom,sdm660
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,ipq6018-cp01-c1
|
||||
|
|
|
|||
|
|
@ -28,6 +28,7 @@ properties:
|
|||
- enum:
|
||||
- qcom,msm8996-smmu-v2
|
||||
- qcom,msm8998-smmu-v2
|
||||
- qcom,sc7180-smmu-v2
|
||||
- qcom,sdm845-smmu-v2
|
||||
- const: qcom,smmu-v2
|
||||
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
|
||||
|
|
|
|||
|
|
@ -1,74 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
&pm8916_gpios {
|
||||
|
||||
usb_hub_reset_pm: usb_hub_reset_pm {
|
||||
pinconf {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
input-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb_hub_reset_pm_device: usb_hub_reset_pm_device {
|
||||
pinconf {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
usb_sw_sel_pm: usb_sw_sel_pm {
|
||||
pinconf {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <PM8916_GPIO_VPH>;
|
||||
input-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb_sw_sel_pm_device: usb_sw_sel_pm_device {
|
||||
pinconf {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <PM8916_GPIO_VPH>;
|
||||
input-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
pm8916_gpios_leds: pm8916_gpios_leds {
|
||||
pinconf {
|
||||
pins = "gpio1", "gpio2";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_mpps {
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ls_exp_gpio_f>;
|
||||
|
||||
ls_exp_gpio_f: pm8916_mpp4 {
|
||||
pinconf {
|
||||
pins = "mpp4";
|
||||
function = "digital";
|
||||
output-low;
|
||||
power-source = <PM8916_MPP_L5>; // 1.8V
|
||||
};
|
||||
};
|
||||
|
||||
pm8916_mpps_leds: pm8916_mpps_leds {
|
||||
pinconf {
|
||||
pins = "mpp2", "mpp3";
|
||||
function = "digital";
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,89 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
&msmgpio {
|
||||
|
||||
msmgpio_leds: msmgpio_leds {
|
||||
pinconf {
|
||||
pins = "gpio21", "gpio120";
|
||||
function = "gpio";
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio121";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio121";
|
||||
drive-strength = <8>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_int_active: adv533_int_active {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio31";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio31";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_int_suspend: adv7533_int_suspend {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio31";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio31";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_switch_active: adv7533_switch_active {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio32";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio32";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_switch_suspend: adv7533_switch_suspend {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio32";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio32";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
msm_key_volp_n_default: msm_key_volp_n_default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio107";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio107";
|
||||
drive-strength = <8>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -5,10 +5,10 @@
|
|||
|
||||
#include "msm8916.dtsi"
|
||||
#include "pm8916.dtsi"
|
||||
#include "apq8016-sbc-soc-pins.dtsi"
|
||||
#include "apq8016-sbc-pmic-pins.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
#include <dt-bindings/sound/apq8016-lpass.h>
|
||||
|
||||
/*
|
||||
|
|
@ -51,6 +51,30 @@ chosen {
|
|||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
camera_vdddo_1v8: camera-vdddo-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera_vdddo";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
camera_vdda_2v8: camera-vdda-2v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera_vdda";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
camera_vddd_1v5: camera-vddd-1v5 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "camera_vddd";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
ramoops@bff00000{
|
||||
compatible = "ramoops";
|
||||
|
|
@ -495,6 +519,27 @@ mpps@a000 {
|
|||
wcnss@a21b000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tpiu@820000 { status = "okay"; };
|
||||
funnel@821000 { status = "okay"; };
|
||||
replicator@824000 { status = "okay"; };
|
||||
etf@825000 { status = "okay"; };
|
||||
etr@826000 { status = "okay"; };
|
||||
funnel@841000 { status = "okay"; };
|
||||
debug@850000 { status = "okay"; };
|
||||
debug@852000 { status = "okay"; };
|
||||
debug@854000 { status = "okay"; };
|
||||
debug@856000 { status = "okay"; };
|
||||
etm@85c000 { status = "okay"; };
|
||||
etm@85d000 { status = "okay"; };
|
||||
etm@85e000 { status = "okay"; };
|
||||
etm@85f000 { status = "okay"; };
|
||||
cti@810000 { status = "okay"; };
|
||||
cti@811000 { status = "okay"; };
|
||||
cti@858000 { status = "okay"; };
|
||||
cti@859000 { status = "okay"; };
|
||||
cti@85a000 { status = "okay"; };
|
||||
cti@85b000 { status = "okay"; };
|
||||
};
|
||||
|
||||
usb2513 {
|
||||
|
|
@ -521,7 +566,7 @@ hdmi_con: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -538,6 +583,58 @@ button@0 {
|
|||
};
|
||||
};
|
||||
|
||||
&camss {
|
||||
status = "ok";
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
csiphy0_ep: endpoint {
|
||||
clock-lanes = <1>;
|
||||
data-lanes = <0 2>;
|
||||
remote-endpoint = <&ov5640_ep>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cci {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&cci_i2c0 {
|
||||
camera_rear@3b {
|
||||
compatible = "ovti,ov5640";
|
||||
reg = <0x3b>;
|
||||
|
||||
enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&camera_rear_default>;
|
||||
|
||||
clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
|
||||
clock-names = "xclk";
|
||||
clock-frequency = <23880000>;
|
||||
|
||||
vdddo-supply = <&camera_vdddo_1v8>;
|
||||
vdda-supply = <&camera_vdda_2v8>;
|
||||
vddd-supply = <&camera_vddd_1v5>;
|
||||
|
||||
/* No camera mezzanine by default */
|
||||
status = "disabled";
|
||||
|
||||
port {
|
||||
ov5640_ep: endpoint {
|
||||
clock-lanes = <1>;
|
||||
data-lanes = <0 2>;
|
||||
remote-endpoint = <&csiphy0_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spmi_bus {
|
||||
pm8916_0: pm8916@0 {
|
||||
pon@800 {
|
||||
|
|
@ -680,3 +777,157 @@ l18 {
|
|||
regulator-max-microvolt = <3337000>;
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
msmgpio_leds: msmgpio-leds {
|
||||
pinconf {
|
||||
pins = "gpio21", "gpio120";
|
||||
function = "gpio";
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio121";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio121";
|
||||
drive-strength = <8>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_int_active: adv533-int-active {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio31";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio31";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_int_suspend: adv7533-int-suspend {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio31";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio31";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_switch_active: adv7533-switch-active {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio32";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio32";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
adv7533_switch_suspend: adv7533-switch-suspend {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio32";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio32";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
msm_key_volp_n_default: msm-key-volp-n-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio107";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio107";
|
||||
drive-strength = <8>;
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_gpios {
|
||||
usb_hub_reset_pm: usb-hub-reset-pm {
|
||||
pinconf {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
input-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb_hub_reset_pm_device: usb-hub-reset-pm-device {
|
||||
pinconf {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
usb_sw_sel_pm: usb-sw-sel-pm {
|
||||
pinconf {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <PM8916_GPIO_VPH>;
|
||||
input-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
usb_sw_sel_pm_device: usb-sw-sel-pm-device {
|
||||
pinconf {
|
||||
pins = "gpio4";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
power-source = <PM8916_GPIO_VPH>;
|
||||
input-disable;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
pm8916_gpios_leds: pm8916-gpios-leds {
|
||||
pinconf {
|
||||
pins = "gpio1", "gpio2";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_mpps {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ls_exp_gpio_f>;
|
||||
|
||||
ls_exp_gpio_f: pm8916-mpp4 {
|
||||
pinconf {
|
||||
pins = "mpp4";
|
||||
function = "digital";
|
||||
output-low;
|
||||
power-source = <PM8916_MPP_L5>; // 1.8V
|
||||
};
|
||||
};
|
||||
|
||||
pm8916_mpps_leds: pm8916-mpps-leds {
|
||||
pinconf {
|
||||
pins = "mpp2", "mpp3";
|
||||
function = "digital";
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -117,16 +117,6 @@ vph_pwr: vph-pwr-regulator {
|
|||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s8a_l3a_input: vreg-s8a-l3a-input {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s8a_l3a_input";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-min-microvolt = <0>;
|
||||
regulator-max-microvolt = <0>;
|
||||
};
|
||||
|
||||
wlan_en: wlan-en-1-8v {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wlan_en_gpios>;
|
||||
|
|
@ -251,6 +241,10 @@ &mdss {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&mmcc {
|
||||
vdd-gfx-supply = <&vdd_gfx>;
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
gpio-line-names =
|
||||
"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
|
||||
|
|
@ -688,6 +682,15 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
&pmi8994_spmi_regulators {
|
||||
vdd_gfx: s2@1700 {
|
||||
reg = <0x1700 0x100>;
|
||||
regulator-name = "VDD_GFX";
|
||||
regulator-min-microvolt = <980000>;
|
||||
regulator-max-microvolt = <980000>;
|
||||
};
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8994-regulators {
|
||||
compatible = "qcom,rpm-pm8994-regulators";
|
||||
|
|
@ -704,15 +707,20 @@ pm8994-regulators {
|
|||
vdd_s10-supply = <&vph_pwr>;
|
||||
vdd_s11-supply = <&vph_pwr>;
|
||||
vdd_s12-supply = <&vph_pwr>;
|
||||
vdd_l1-supply = <&vreg_s1b_1p025>;
|
||||
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
|
||||
vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
|
||||
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
|
||||
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
|
||||
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
|
||||
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
|
||||
vdd_l8_l16_l30-supply = <&vph_pwr>;
|
||||
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
|
||||
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
|
||||
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
|
||||
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
|
||||
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
|
||||
vdd_l25-supply = <&vreg_s3a_1p3>;
|
||||
vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
|
||||
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s3a_1p3: s3 {
|
||||
regulator-name = "vreg_s3a_1p3";
|
||||
|
|
@ -895,6 +903,27 @@ vreg_lvs2a_1p8: lvs2 {
|
|||
regulator-name = "vreg_lvs2a_1p8";
|
||||
};
|
||||
};
|
||||
|
||||
pmi8994-regulators {
|
||||
compatible = "qcom,rpm-pmi8994-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_bst_byp-supply = <&vph_pwr>;
|
||||
|
||||
vph_pwr_bbyp: boost-bypass {
|
||||
regulator-name = "vph_pwr_bbyp";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vreg_s1b_1p025: s1 {
|
||||
regulator-name = "vreg_s1b_1p025";
|
||||
regulator-min-microvolt = <1025000>;
|
||||
regulator-max-microvolt = <1025000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc2 {
|
||||
|
|
|
|||
|
|
@ -24,63 +24,61 @@ memory {
|
|||
device_type = "memory";
|
||||
reg = <0x0 0x40000000 0x0 0x20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
serial@78b3000 {
|
||||
status = "ok";
|
||||
};
|
||||
&blsp1_i2c2 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
spi@78b5000 {
|
||||
status = "ok";
|
||||
&blsp1_spi1 {
|
||||
status = "ok";
|
||||
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
serial@78b1000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
i2c@78b6000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
dma@7984000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
nand@79b0000 {
|
||||
status = "ok";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
phy@86000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
phy@8e000 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
pci@20000000 {
|
||||
status = "ok";
|
||||
perst-gpio = <&tlmm 58 0x1>;
|
||||
};
|
||||
|
||||
pci@10000000 {
|
||||
status = "ok";
|
||||
perst-gpio = <&tlmm 61 0x1>;
|
||||
};
|
||||
m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "ok";
|
||||
perst-gpio = <&tlmm 61 0x1>;
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "ok";
|
||||
perst-gpio = <&tlmm 58 0x1>;
|
||||
};
|
||||
|
||||
&pcie_phy0 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&pcie_phy1 {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "ok";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -10,15 +10,111 @@ / {
|
|||
model = "Qualcomm Technologies, Inc. IPQ8074";
|
||||
compatible = "qcom,ipq8074";
|
||||
|
||||
clocks {
|
||||
sleep_clk: sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
xo: xo {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <19200000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
CPU0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
CPU1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
CPU2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x2>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
CPU3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x3>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
L2_0: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,armv8-pmuv3";
|
||||
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
compatible = "simple-bus";
|
||||
|
||||
pcie_phy0: phy@86000 {
|
||||
compatible = "qcom,ipq8074-qmp-pcie-phy";
|
||||
reg = <0x00086000 0x1000>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
|
||||
clock-names = "pipe_clk";
|
||||
clock-output-names = "pcie20_phy0_pipe_clk";
|
||||
|
||||
resets = <&gcc GCC_PCIE0_PHY_BCR>,
|
||||
<&gcc GCC_PCIE0PHY_PHY_BCR>;
|
||||
reset-names = "phy",
|
||||
"common";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie_phy1: phy@8e000 {
|
||||
compatible = "qcom,ipq8074-qmp-pcie-phy";
|
||||
reg = <0x0008e000 0x1000>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
|
||||
clock-names = "pipe_clk";
|
||||
clock-output-names = "pcie20_phy1_pipe_clk";
|
||||
|
||||
resets = <&gcc GCC_PCIE1_PHY_BCR>,
|
||||
<&gcc GCC_PCIE1PHY_PHY_BCR>;
|
||||
reset-names = "phy",
|
||||
"common";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,ipq8074-pinctrl";
|
||||
reg = <0x1000000 0x300000>;
|
||||
reg = <0x01000000 0x300000>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&tlmm 0 0 70>;
|
||||
|
|
@ -66,102 +162,16 @@ qpic_pins: qpic-pins {
|
|||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@b000000 {
|
||||
compatible = "qcom,msm-qgic2";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x3>;
|
||||
reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
timer@b120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0xb120000 0x1000>;
|
||||
clock-frequency = <19200000>;
|
||||
|
||||
frame@b120000 {
|
||||
frame-number = <0>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb121000 0x1000>,
|
||||
<0xb122000 0x1000>;
|
||||
};
|
||||
|
||||
frame@b123000 {
|
||||
frame-number = <1>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb123000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b124000 {
|
||||
frame-number = <2>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb124000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b125000 {
|
||||
frame-number = <3>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb125000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b126000 {
|
||||
frame-number = <4>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb126000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b127000 {
|
||||
frame-number = <5>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb127000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b128000 {
|
||||
frame-number = <6>;
|
||||
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0xb128000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gcc: gcc@1800000 {
|
||||
compatible = "qcom,gcc-ipq8074";
|
||||
reg = <0x1800000 0x80000>;
|
||||
reg = <0x01800000 0x80000>;
|
||||
#clock-cells = <0x1>;
|
||||
#reset-cells = <0x1>;
|
||||
};
|
||||
|
||||
blsp1_uart5: serial@78b3000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x78b3000 0x200>;
|
||||
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
pinctrl-0 = <&serial_4_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_dma: dma@7884000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x7884000 0x2b000>;
|
||||
reg = <0x07884000 0x2b000>;
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
|
|
@ -171,7 +181,7 @@ blsp_dma: dma@7884000 {
|
|||
|
||||
blsp1_uart1: serial@78af000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x78af000 0x200>;
|
||||
reg = <0x078af000 0x200>;
|
||||
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
|
|
@ -181,7 +191,7 @@ blsp1_uart1: serial@78af000 {
|
|||
|
||||
blsp1_uart3: serial@78b1000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x78b1000 0x200>;
|
||||
reg = <0x078b1000 0x200>;
|
||||
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
|
|
@ -194,11 +204,23 @@ blsp1_uart3: serial@78b1000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_uart5: serial@78b3000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x078b3000 0x200>;
|
||||
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
pinctrl-0 = <&serial_4_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp1_spi1: spi@78b5000 {
|
||||
compatible = "qcom,spi-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x78b5000 0x600>;
|
||||
reg = <0x078b5000 0x600>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
spi-max-frequency = <50000000>;
|
||||
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
|
||||
|
|
@ -215,7 +237,7 @@ blsp1_i2c2: i2c@78b6000 {
|
|||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x78b6000 0x600>;
|
||||
reg = <0x078b6000 0x600>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
|
||||
|
|
@ -232,7 +254,7 @@ blsp1_i2c3: i2c@78b7000 {
|
|||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x78b7000 0x600>;
|
||||
reg = <0x078b7000 0x600>;
|
||||
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
|
||||
|
|
@ -245,7 +267,7 @@ blsp1_i2c3: i2c@78b7000 {
|
|||
|
||||
qpic_bam: dma@7984000 {
|
||||
compatible = "qcom,bam-v1.7.0";
|
||||
reg = <0x7984000 0x1a000>;
|
||||
reg = <0x07984000 0x1a000>;
|
||||
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_QPIC_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
|
|
@ -256,7 +278,7 @@ qpic_bam: dma@7984000 {
|
|||
|
||||
qpic_nand: nand@79b0000 {
|
||||
compatible = "qcom,ipq8074-nand";
|
||||
reg = <0x79b0000 0x10000>;
|
||||
reg = <0x079b0000 0x10000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&gcc GCC_QPIC_CLK>,
|
||||
|
|
@ -272,18 +294,139 @@ qpic_nand: nand@79b0000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie_phy0: phy@86000 {
|
||||
compatible = "qcom,ipq8074-qmp-pcie-phy";
|
||||
reg = <0x86000 0x1000>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
|
||||
clock-names = "pipe_clk";
|
||||
clock-output-names = "pcie20_phy0_pipe_clk";
|
||||
intc: interrupt-controller@b000000 {
|
||||
compatible = "qcom,msm-qgic2";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <0x3>;
|
||||
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
|
||||
};
|
||||
|
||||
resets = <&gcc GCC_PCIE0_PHY_BCR>,
|
||||
<&gcc GCC_PCIE0PHY_PHY_BCR>;
|
||||
reset-names = "phy",
|
||||
"common";
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
timer@b120000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0x0b120000 0x1000>;
|
||||
clock-frequency = <19200000>;
|
||||
|
||||
frame@b120000 {
|
||||
frame-number = <0>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b121000 0x1000>,
|
||||
<0x0b122000 0x1000>;
|
||||
};
|
||||
|
||||
frame@b123000 {
|
||||
frame-number = <1>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b123000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b124000 {
|
||||
frame-number = <2>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b124000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b125000 {
|
||||
frame-number = <3>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b125000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b126000 {
|
||||
frame-number = <4>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b126000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b127000 {
|
||||
frame-number = <5>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b127000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@b128000 {
|
||||
frame-number = <6>;
|
||||
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x0b128000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
pcie1: pci@10000000 {
|
||||
compatible = "qcom,pcie-ipq8074";
|
||||
reg = <0x10000000 0xf1d
|
||||
0x10000f20 0xa8
|
||||
0x00088000 0x2000
|
||||
0x10100000 0x1000>;
|
||||
reg-names = "dbi", "elbi", "parf", "config";
|
||||
device_type = "pci";
|
||||
linux,pci-domain = <1>;
|
||||
bus-range = <0x00 0xff>;
|
||||
num-lanes = <1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
phys = <&pcie_phy1>;
|
||||
phy-names = "pciephy";
|
||||
|
||||
ranges = <0x81000000 0 0x10200000 0x10200000
|
||||
0 0x100000 /* downstream I/O */
|
||||
0x82000000 0 0x10300000 0x10300000
|
||||
0 0xd00000>; /* non-prefetchable memory */
|
||||
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc 0 142
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
<0 0 0 2 &intc 0 143
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
<0 0 0 3 &intc 0 144
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
<0 0 0 4 &intc 0 145
|
||||
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
|
||||
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
|
||||
<&gcc GCC_PCIE1_AXI_M_CLK>,
|
||||
<&gcc GCC_PCIE1_AXI_S_CLK>,
|
||||
<&gcc GCC_PCIE1_AHB_CLK>,
|
||||
<&gcc GCC_PCIE1_AUX_CLK>;
|
||||
clock-names = "iface",
|
||||
"axi_m",
|
||||
"axi_s",
|
||||
"ahb",
|
||||
"aux";
|
||||
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
|
||||
<&gcc GCC_PCIE1_SLEEP_ARES>,
|
||||
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_MASTER_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
|
||||
<&gcc GCC_PCIE1_AHB_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
|
||||
reset-names = "pipe",
|
||||
"sleep",
|
||||
"sticky",
|
||||
"axi_m",
|
||||
"axi_s",
|
||||
"ahb",
|
||||
"axi_m_sticky";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -291,7 +434,7 @@ pcie0: pci@20000000 {
|
|||
compatible = "qcom,pcie-ipq8074";
|
||||
reg = <0x20000000 0xf1d
|
||||
0x20000f20 0xa8
|
||||
0x80000 0x2000
|
||||
0x00080000 0x2000
|
||||
0x20100000 0x1000>;
|
||||
reg-names = "dbi", "elbi", "parf", "config";
|
||||
device_type = "pci";
|
||||
|
|
@ -349,148 +492,5 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|||
"axi_m_sticky";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie_phy1: phy@8e000 {
|
||||
compatible = "qcom,ipq8074-qmp-pcie-phy";
|
||||
reg = <0x8e000 0x1000>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
|
||||
clock-names = "pipe_clk";
|
||||
clock-output-names = "pcie20_phy1_pipe_clk";
|
||||
|
||||
resets = <&gcc GCC_PCIE1_PHY_BCR>,
|
||||
<&gcc GCC_PCIE1PHY_PHY_BCR>;
|
||||
reset-names = "phy",
|
||||
"common";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pcie1: pci@10000000 {
|
||||
compatible = "qcom,pcie-ipq8074";
|
||||
reg = <0x10000000 0xf1d
|
||||
0x10000f20 0xa8
|
||||
0x88000 0x2000
|
||||
0x10100000 0x1000>;
|
||||
reg-names = "dbi", "elbi", "parf", "config";
|
||||
device_type = "pci";
|
||||
linux,pci-domain = <1>;
|
||||
bus-range = <0x00 0xff>;
|
||||
num-lanes = <1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
phys = <&pcie_phy1>;
|
||||
phy-names = "pciephy";
|
||||
|
||||
ranges = <0x81000000 0 0x10200000 0x10200000
|
||||
0 0x100000 /* downstream I/O */
|
||||
0x82000000 0 0x10300000 0x10300000
|
||||
0 0xd00000>; /* non-prefetchable memory */
|
||||
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc 0 142
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
<0 0 0 2 &intc 0 143
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
<0 0 0 3 &intc 0 144
|
||||
IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
<0 0 0 4 &intc 0 145
|
||||
IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
|
||||
clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
|
||||
<&gcc GCC_PCIE1_AXI_M_CLK>,
|
||||
<&gcc GCC_PCIE1_AXI_S_CLK>,
|
||||
<&gcc GCC_PCIE1_AHB_CLK>,
|
||||
<&gcc GCC_PCIE1_AUX_CLK>;
|
||||
clock-names = "iface",
|
||||
"axi_m",
|
||||
"axi_s",
|
||||
"ahb",
|
||||
"aux";
|
||||
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
|
||||
<&gcc GCC_PCIE1_SLEEP_ARES>,
|
||||
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_MASTER_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
|
||||
<&gcc GCC_PCIE1_AHB_ARES>,
|
||||
<&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
|
||||
reset-names = "pipe",
|
||||
"sleep",
|
||||
"sticky",
|
||||
"axi_m",
|
||||
"axi_s",
|
||||
"ahb",
|
||||
"axi_m_sticky";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
|
||||
CPU0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
enable-method = "psci";
|
||||
};
|
||||
|
||||
CPU1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
CPU2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x2>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
CPU3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a53";
|
||||
enable-method = "psci";
|
||||
reg = <0x3>;
|
||||
next-level-cache = <&L2_0>;
|
||||
};
|
||||
|
||||
L2_0: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,armv8-pmuv3";
|
||||
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
sleep_clk: sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
xo: xo {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <19200000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -82,29 +82,6 @@ phy {
|
|||
wcnss@a21b000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Attempting to enable these devices causes a "synchronous
|
||||
* external abort". Suspected cause is that the debug power
|
||||
* domain is not enabled by default on this device.
|
||||
* Disable these devices for now to avoid the crash.
|
||||
*
|
||||
* See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
|
||||
*/
|
||||
tpiu@820000 { status = "disabled"; };
|
||||
funnel@821000 { status = "disabled"; };
|
||||
replicator@824000 { status = "disabled"; };
|
||||
etf@825000 { status = "disabled"; };
|
||||
etr@826000 { status = "disabled"; };
|
||||
funnel@841000 { status = "disabled"; };
|
||||
debug@850000 { status = "disabled"; };
|
||||
debug@852000 { status = "disabled"; };
|
||||
debug@854000 { status = "disabled"; };
|
||||
debug@856000 { status = "disabled"; };
|
||||
etm@85c000 { status = "disabled"; };
|
||||
etm@85d000 { status = "disabled"; };
|
||||
etm@85e000 { status = "disabled"; };
|
||||
etm@85f000 { status = "disabled"; };
|
||||
};
|
||||
|
||||
// FIXME: Use extcon device provided by charger driver when available
|
||||
|
|
@ -132,7 +109,7 @@ volume-up {
|
|||
};
|
||||
|
||||
&msmgpio {
|
||||
gpio_keys_default: gpio_keys_default {
|
||||
gpio_keys_default: gpio-keys-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio107";
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
|
||||
&msmgpio {
|
||||
|
||||
blsp1_uart1_default: blsp1_uart1_default {
|
||||
blsp1_uart1_default: blsp1-uart1-default {
|
||||
pinmux {
|
||||
function = "blsp_uart1";
|
||||
// TX, RX, CTS_N, RTS_N
|
||||
|
|
@ -20,7 +20,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
blsp1_uart1_sleep: blsp1_uart1_sleep {
|
||||
blsp1_uart1_sleep: blsp1-uart1-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio0", "gpio1",
|
||||
|
|
@ -34,7 +34,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
blsp1_uart2_default: blsp1_uart2_default {
|
||||
blsp1_uart2_default: blsp1-uart2-default {
|
||||
pinmux {
|
||||
function = "blsp_uart2";
|
||||
pins = "gpio4", "gpio5";
|
||||
|
|
@ -46,7 +46,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
blsp1_uart2_sleep: blsp1_uart2_sleep {
|
||||
blsp1_uart2_sleep: blsp1-uart2-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio4", "gpio5";
|
||||
|
|
@ -58,12 +58,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi1_default: spi1_default {
|
||||
spi1_default: spi1-default {
|
||||
pinmux {
|
||||
function = "blsp_spi1";
|
||||
pins = "gpio0", "gpio1", "gpio3";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio2";
|
||||
};
|
||||
|
|
@ -72,7 +72,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio2";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -80,7 +80,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi1_sleep: spi1_sleep {
|
||||
spi1_sleep: spi1-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio0", "gpio1", "gpio2", "gpio3";
|
||||
|
|
@ -92,12 +92,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi2_default: spi2_default {
|
||||
spi2_default: spi2-default {
|
||||
pinmux {
|
||||
function = "blsp_spi2";
|
||||
pins = "gpio4", "gpio5", "gpio7";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio6";
|
||||
};
|
||||
|
|
@ -106,7 +106,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio6";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -114,7 +114,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi2_sleep: spi2_sleep {
|
||||
spi2_sleep: spi2-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
||||
|
|
@ -126,12 +126,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi3_default: spi3_default {
|
||||
spi3_default: spi3-default {
|
||||
pinmux {
|
||||
function = "blsp_spi3";
|
||||
pins = "gpio8", "gpio9", "gpio11";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio10";
|
||||
};
|
||||
|
|
@ -140,7 +140,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio10";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -148,7 +148,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi3_sleep: spi3_sleep {
|
||||
spi3_sleep: spi3-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
|
|
@ -160,12 +160,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi4_default: spi4_default {
|
||||
spi4_default: spi4-default {
|
||||
pinmux {
|
||||
function = "blsp_spi4";
|
||||
pins = "gpio12", "gpio13", "gpio15";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio14";
|
||||
};
|
||||
|
|
@ -174,7 +174,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio14";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -182,7 +182,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi4_sleep: spi4_sleep {
|
||||
spi4_sleep: spi4-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio12", "gpio13", "gpio14", "gpio15";
|
||||
|
|
@ -194,12 +194,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi5_default: spi5_default {
|
||||
spi5_default: spi5-default {
|
||||
pinmux {
|
||||
function = "blsp_spi5";
|
||||
pins = "gpio16", "gpio17", "gpio19";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio18";
|
||||
};
|
||||
|
|
@ -208,7 +208,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio18";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -216,7 +216,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi5_sleep: spi5_sleep {
|
||||
spi5_sleep: spi5-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio16", "gpio17", "gpio18", "gpio19";
|
||||
|
|
@ -228,12 +228,12 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
spi6_default: spi6_default {
|
||||
spi6_default: spi6-default {
|
||||
pinmux {
|
||||
function = "blsp_spi6";
|
||||
pins = "gpio20", "gpio21", "gpio23";
|
||||
};
|
||||
pinmux_cs {
|
||||
pinmux-cs {
|
||||
function = "gpio";
|
||||
pins = "gpio22";
|
||||
};
|
||||
|
|
@ -242,7 +242,7 @@ pinconf {
|
|||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
pinconf_cs {
|
||||
pinconf-cs {
|
||||
pins = "gpio22";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
@ -250,7 +250,7 @@ pinconf_cs {
|
|||
};
|
||||
};
|
||||
|
||||
spi6_sleep: spi6_sleep {
|
||||
spi6_sleep: spi6-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio20", "gpio21", "gpio22", "gpio23";
|
||||
|
|
@ -262,7 +262,31 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c2_default: i2c2_default {
|
||||
i2c1_default: i2c1-default {
|
||||
pinmux {
|
||||
function = "blsp_i2c1";
|
||||
pins = "gpio2", "gpio3";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio2", "gpio3";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_sleep: i2c1-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio2", "gpio3";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio2", "gpio3";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_default: i2c2-default {
|
||||
pinmux {
|
||||
function = "blsp_i2c2";
|
||||
pins = "gpio6", "gpio7";
|
||||
|
|
@ -274,7 +298,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c2_sleep: i2c2_sleep {
|
||||
i2c2_sleep: i2c2-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio6", "gpio7";
|
||||
|
|
@ -286,7 +310,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c4_default: i2c4_default {
|
||||
i2c4_default: i2c4-default {
|
||||
pinmux {
|
||||
function = "blsp_i2c4";
|
||||
pins = "gpio14", "gpio15";
|
||||
|
|
@ -298,7 +322,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c4_sleep: i2c4_sleep {
|
||||
i2c4_sleep: i2c4-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio14", "gpio15";
|
||||
|
|
@ -310,7 +334,31 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c6_default: i2c6_default {
|
||||
i2c5_default: i2c5-default {
|
||||
pinmux {
|
||||
function = "blsp_i2c5";
|
||||
pins = "gpio18", "gpio19";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c5_sleep: i2c5-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio18", "gpio19";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio18", "gpio19";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_default: i2c6-default {
|
||||
pinmux {
|
||||
function = "blsp_i2c6";
|
||||
pins = "gpio22", "gpio23";
|
||||
|
|
@ -322,7 +370,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
i2c6_sleep: i2c6_sleep {
|
||||
i2c6_sleep: i2c6-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio22", "gpio23";
|
||||
|
|
@ -334,8 +382,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc1_clk {
|
||||
sdc1_clk_on: clk_on {
|
||||
pmx-sdc1-clk {
|
||||
sdc1_clk_on: clk-on {
|
||||
pinmux {
|
||||
pins = "sdc1_clk";
|
||||
};
|
||||
|
|
@ -345,7 +393,7 @@ pinconf {
|
|||
drive-strength = <16>;
|
||||
};
|
||||
};
|
||||
sdc1_clk_off: clk_off {
|
||||
sdc1_clk_off: clk-off {
|
||||
pinmux {
|
||||
pins = "sdc1_clk";
|
||||
};
|
||||
|
|
@ -357,8 +405,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc1_cmd {
|
||||
sdc1_cmd_on: cmd_on {
|
||||
pmx-sdc1-cmd {
|
||||
sdc1_cmd_on: cmd-on {
|
||||
pinmux {
|
||||
pins = "sdc1_cmd";
|
||||
};
|
||||
|
|
@ -368,7 +416,7 @@ pinconf {
|
|||
drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
sdc1_cmd_off: cmd_off {
|
||||
sdc1_cmd_off: cmd-off {
|
||||
pinmux {
|
||||
pins = "sdc1_cmd";
|
||||
};
|
||||
|
|
@ -380,8 +428,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc1_data {
|
||||
sdc1_data_on: data_on {
|
||||
pmx-sdc1-data {
|
||||
sdc1_data_on: data-on {
|
||||
pinmux {
|
||||
pins = "sdc1_data";
|
||||
};
|
||||
|
|
@ -391,7 +439,7 @@ pinconf {
|
|||
drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
sdc1_data_off: data_off {
|
||||
sdc1_data_off: data-off {
|
||||
pinmux {
|
||||
pins = "sdc1_data";
|
||||
};
|
||||
|
|
@ -403,8 +451,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc2_clk {
|
||||
sdc2_clk_on: clk_on {
|
||||
pmx-sdc2-clk {
|
||||
sdc2_clk_on: clk-on {
|
||||
pinmux {
|
||||
pins = "sdc2_clk";
|
||||
};
|
||||
|
|
@ -414,7 +462,7 @@ pinconf {
|
|||
drive-strength = <16>;
|
||||
};
|
||||
};
|
||||
sdc2_clk_off: clk_off {
|
||||
sdc2_clk_off: clk-off {
|
||||
pinmux {
|
||||
pins = "sdc2_clk";
|
||||
};
|
||||
|
|
@ -426,8 +474,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc2_cmd {
|
||||
sdc2_cmd_on: cmd_on {
|
||||
pmx-sdc2-cmd {
|
||||
sdc2_cmd_on: cmd-on {
|
||||
pinmux {
|
||||
pins = "sdc2_cmd";
|
||||
};
|
||||
|
|
@ -437,7 +485,7 @@ pinconf {
|
|||
drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
sdc2_cmd_off: cmd_off {
|
||||
sdc2_cmd_off: cmd-off {
|
||||
pinmux {
|
||||
pins = "sdc2_cmd";
|
||||
};
|
||||
|
|
@ -449,8 +497,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc2_data {
|
||||
sdc2_data_on: data_on {
|
||||
pmx-sdc2-data {
|
||||
sdc2_data_on: data-on {
|
||||
pinmux {
|
||||
pins = "sdc2_data";
|
||||
};
|
||||
|
|
@ -460,7 +508,7 @@ pinconf {
|
|||
drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
sdc2_data_off: data_off {
|
||||
sdc2_data_off: data-off {
|
||||
pinmux {
|
||||
pins = "sdc2_data";
|
||||
};
|
||||
|
|
@ -472,8 +520,8 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
pmx_sdc2_cd_pin {
|
||||
sdc2_cd_on: cd_on {
|
||||
pmx-sdc2-cd-pin {
|
||||
sdc2_cd_on: cd-on {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio38";
|
||||
|
|
@ -484,7 +532,7 @@ pinconf {
|
|||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
sdc2_cd_off: cd_off {
|
||||
sdc2_cd_off: cd-off {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio38";
|
||||
|
|
@ -498,7 +546,7 @@ pinconf {
|
|||
};
|
||||
|
||||
cdc-pdm-lines {
|
||||
cdc_pdm_lines_act: pdm_lines_on {
|
||||
cdc_pdm_lines_act: pdm-lines-on {
|
||||
pinmux {
|
||||
function = "cdc_pdm0";
|
||||
pins = "gpio63", "gpio64", "gpio65", "gpio66",
|
||||
|
|
@ -511,7 +559,7 @@ pinconf {
|
|||
bias-pull-none;
|
||||
};
|
||||
};
|
||||
cdc_pdm_lines_sus: pdm_lines_off {
|
||||
cdc_pdm_lines_sus: pdm-lines-off {
|
||||
pinmux {
|
||||
function = "cdc_pdm0";
|
||||
pins = "gpio63", "gpio64", "gpio65", "gpio66",
|
||||
|
|
@ -527,7 +575,7 @@ pinconf {
|
|||
};
|
||||
|
||||
ext-pri-tlmm-lines {
|
||||
ext_pri_tlmm_lines_act: ext_pa_on {
|
||||
ext_pri_tlmm_lines_act: ext-pa-on {
|
||||
pinmux {
|
||||
function = "pri_mi2s";
|
||||
pins = "gpio113", "gpio114", "gpio115",
|
||||
|
|
@ -541,7 +589,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
ext_pri_tlmm_lines_sus: ext_pa_off {
|
||||
ext_pri_tlmm_lines_sus: ext-pa-off {
|
||||
pinmux {
|
||||
function = "pri_mi2s";
|
||||
pins = "gpio113", "gpio114", "gpio115",
|
||||
|
|
@ -557,7 +605,7 @@ pinconf {
|
|||
};
|
||||
|
||||
ext-pri-ws-line {
|
||||
ext_pri_ws_act: ext_pa_on {
|
||||
ext_pri_ws_act: ext-pa-on {
|
||||
pinmux {
|
||||
function = "pri_mi2s_ws";
|
||||
pins = "gpio110";
|
||||
|
|
@ -569,7 +617,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
ext_pri_ws_sus: ext_pa_off {
|
||||
ext_pri_ws_sus: ext-pa-off {
|
||||
pinmux {
|
||||
function = "pri_mi2s_ws";
|
||||
pins = "gpio110";
|
||||
|
|
@ -583,7 +631,7 @@ pinconf {
|
|||
};
|
||||
|
||||
ext-mclk-tlmm-lines {
|
||||
ext_mclk_tlmm_lines_act: mclk_lines_on {
|
||||
ext_mclk_tlmm_lines_act: mclk-lines-on {
|
||||
pinmux {
|
||||
function = "pri_mi2s";
|
||||
pins = "gpio116";
|
||||
|
|
@ -594,7 +642,7 @@ pinconf {
|
|||
bias-pull-none;
|
||||
};
|
||||
};
|
||||
ext_mclk_tlmm_lines_sus: mclk_lines_off {
|
||||
ext_mclk_tlmm_lines_sus: mclk-lines-off {
|
||||
pinmux {
|
||||
function = "pri_mi2s";
|
||||
pins = "gpio116";
|
||||
|
|
@ -609,7 +657,7 @@ pinconf {
|
|||
|
||||
/* secondary Mi2S */
|
||||
ext-sec-tlmm-lines {
|
||||
ext_sec_tlmm_lines_act: tlmm_lines_on {
|
||||
ext_sec_tlmm_lines_act: tlmm-lines-on {
|
||||
pinmux {
|
||||
function = "sec_mi2s";
|
||||
pins = "gpio112", "gpio117", "gpio118",
|
||||
|
|
@ -622,7 +670,7 @@ pinconf {
|
|||
bias-pull-none;
|
||||
};
|
||||
};
|
||||
ext_sec_tlmm_lines_sus: tlmm_lines_off {
|
||||
ext_sec_tlmm_lines_sus: tlmm-lines-off {
|
||||
pinmux {
|
||||
function = "sec_mi2s";
|
||||
pins = "gpio112", "gpio117", "gpio118",
|
||||
|
|
@ -638,12 +686,12 @@ pinconf {
|
|||
};
|
||||
|
||||
cdc-dmic-lines {
|
||||
cdc_dmic_lines_act: dmic_lines_on {
|
||||
pinmux_dmic0_clk {
|
||||
cdc_dmic_lines_act: dmic-lines-on {
|
||||
pinmux-dmic0-clk {
|
||||
function = "dmic0_clk";
|
||||
pins = "gpio0";
|
||||
};
|
||||
pinmux_dmic0_data {
|
||||
pinmux-dmic0-data {
|
||||
function = "dmic0_data";
|
||||
pins = "gpio1";
|
||||
};
|
||||
|
|
@ -652,12 +700,12 @@ pinconf {
|
|||
drive-strength = <8>;
|
||||
};
|
||||
};
|
||||
cdc_dmic_lines_sus: dmic_lines_off {
|
||||
pinmux_dmic0_clk {
|
||||
cdc_dmic_lines_sus: dmic-lines-off {
|
||||
pinmux-dmic0-clk {
|
||||
function = "dmic0_clk";
|
||||
pins = "gpio0";
|
||||
};
|
||||
pinmux_dmic0_data {
|
||||
pinmux-dmic0-data {
|
||||
function = "dmic0_data";
|
||||
pins = "gpio1";
|
||||
};
|
||||
|
|
@ -674,7 +722,6 @@ pinmux {
|
|||
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
|
||||
function = "wcss_wlan";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
|
||||
drive-strength = <6>;
|
||||
|
|
@ -682,7 +729,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
cci0_default: cci0_default {
|
||||
cci0_default: cci0-default {
|
||||
pinmux {
|
||||
function = "cci_i2c";
|
||||
pins = "gpio29", "gpio30";
|
||||
|
|
@ -694,64 +741,64 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
camera_front_default: camera_front_default {
|
||||
pinmux_pwdn {
|
||||
camera_front_default: camera-front-default {
|
||||
pinmux-pwdn {
|
||||
function = "gpio";
|
||||
pins = "gpio33";
|
||||
};
|
||||
pinconf_pwdn {
|
||||
pinconf-pwdn {
|
||||
pins = "gpio33";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_rst {
|
||||
pinmux-rst {
|
||||
function = "gpio";
|
||||
pins = "gpio28";
|
||||
};
|
||||
pinconf_rst {
|
||||
pinconf-rst {
|
||||
pins = "gpio28";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_mclk1 {
|
||||
pinmux-mclk1 {
|
||||
function = "cam_mclk1";
|
||||
pins = "gpio27";
|
||||
};
|
||||
pinconf_mclk1 {
|
||||
pinconf-mclk1 {
|
||||
pins = "gpio27";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
camera_rear_default: camera_rear_default {
|
||||
pinmux_pwdn {
|
||||
camera_rear_default: camera-rear-default {
|
||||
pinmux-pwdn {
|
||||
function = "gpio";
|
||||
pins = "gpio34";
|
||||
};
|
||||
pinconf_pwdn {
|
||||
pinconf-pwdn {
|
||||
pins = "gpio34";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_rst {
|
||||
pinmux-rst {
|
||||
function = "gpio";
|
||||
pins = "gpio35";
|
||||
};
|
||||
pinconf_rst {
|
||||
pinconf-rst {
|
||||
pins = "gpio35";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_mclk0 {
|
||||
pinmux-mclk0 {
|
||||
function = "cam_mclk0";
|
||||
pins = "gpio26";
|
||||
};
|
||||
pinconf_mclk0 {
|
||||
pinconf-mclk0 {
|
||||
pins = "gpio26";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
|
|
|
|||
|
|
@ -72,32 +72,27 @@ phy {
|
|||
};
|
||||
};
|
||||
|
||||
mdss@1a00000 {
|
||||
dsi@1a98000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdda-supply = <&pm8916_l2>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&mdss_default>;
|
||||
pinctrl-1 = <&mdss_sleep>;
|
||||
};
|
||||
|
||||
dsi-phy@1a98300 {
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
};
|
||||
};
|
||||
|
||||
wcnss@a21b000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Attempting to enable these devices causes a "synchronous
|
||||
* external abort". Suspected cause is that the debug power
|
||||
* domain is not enabled by default on this device.
|
||||
* Disable these devices for now to avoid the crash.
|
||||
*
|
||||
* See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/
|
||||
*/
|
||||
tpiu@820000 { status = "disabled"; };
|
||||
funnel@821000 { status = "disabled"; };
|
||||
replicator@824000 { status = "disabled"; };
|
||||
etf@825000 { status = "disabled"; };
|
||||
etr@826000 { status = "disabled"; };
|
||||
funnel@841000 { status = "disabled"; };
|
||||
debug@850000 { status = "disabled"; };
|
||||
debug@852000 { status = "disabled"; };
|
||||
debug@854000 { status = "disabled"; };
|
||||
debug@856000 { status = "disabled"; };
|
||||
etm@85c000 { status = "disabled"; };
|
||||
etm@85d000 { status = "disabled"; };
|
||||
etm@85e000 { status = "disabled"; };
|
||||
etm@85f000 { status = "disabled"; };
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
|
|
@ -138,6 +133,19 @@ hall-sensor {
|
|||
};
|
||||
};
|
||||
|
||||
reg_vdd_tsp: regulator-vdd-tsp {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_tsp";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tsp_en_default>;
|
||||
};
|
||||
|
||||
i2c-muic {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
|
|
@ -160,7 +168,7 @@ muic: sm5502@25 {
|
|||
};
|
||||
|
||||
&msmgpio {
|
||||
gpio_keys_default: gpio_keys_default {
|
||||
gpio_keys_default: gpio-keys-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio107", "gpio109";
|
||||
|
|
@ -172,7 +180,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
gpio_hall_sensor_default: gpio_hall_sensor_default {
|
||||
gpio_hall_sensor_default: gpio-hall-sensor-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio52";
|
||||
|
|
@ -184,7 +192,7 @@ pinconf {
|
|||
};
|
||||
};
|
||||
|
||||
muic_int_default: muic_int_default {
|
||||
muic_int_default: muic-int-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio12";
|
||||
|
|
@ -195,6 +203,44 @@ pinconf {
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
tsp_en_default: tsp-en-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio73";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio73";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pmx-mdss {
|
||||
mdss_default: mdss-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio25";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio25";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
mdss_sleep: mdss-sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio25";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio25";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&smd_rpm_regulators {
|
||||
|
|
|
|||
|
|
@ -7,4 +7,58 @@
|
|||
/ {
|
||||
model = "Samsung Galaxy A3U (EUR)";
|
||||
compatible = "samsung,a3u-eur", "qcom,msm8916";
|
||||
|
||||
reg_panel_vdd3: regulator-panel-vdd3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "panel_vdd3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&panel_vdd3_default>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
panel@0 {
|
||||
reg = <0>;
|
||||
|
||||
compatible = "samsung,s6e88a0-ams452ef01";
|
||||
|
||||
vdd3-supply = <®_panel_vdd3>;
|
||||
vci-supply = <&pm8916_l17>;
|
||||
reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&dsi0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ports {
|
||||
port@1 {
|
||||
dsi0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
data-lanes = <0 1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
panel_vdd3_default: panel-vdd3-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio9";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio9";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,8 +9,43 @@ / {
|
|||
compatible = "samsung,a5u-eur", "qcom,msm8916";
|
||||
};
|
||||
|
||||
&blsp_i2c5 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@48 {
|
||||
compatible = "melfas,mms345l";
|
||||
|
||||
reg = <0x48>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <720>;
|
||||
touchscreen-size-y = <1280>;
|
||||
|
||||
avdd-supply = <®_vdd_tsp>;
|
||||
vdd-supply = <&pm8916_l6>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ts_int_default>;
|
||||
};
|
||||
};
|
||||
|
||||
&pronto {
|
||||
iris {
|
||||
compatible = "qcom,wcn3680";
|
||||
};
|
||||
};
|
||||
|
||||
&msmgpio {
|
||||
ts_int_default: ts-int-default {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio13";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio13";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/arm/coresight-cti-dt.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
|
||||
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
|
||||
|
|
@ -165,6 +166,9 @@ CPU_SLEEP_0: cpu-sleep-0 {
|
|||
min-residency-us = <2000>;
|
||||
local-timer-stop;
|
||||
};
|
||||
};
|
||||
|
||||
domain-idle-states {
|
||||
|
||||
CLUSTER_RET: cluster-retention {
|
||||
compatible = "domain-idle-state";
|
||||
|
|
@ -188,31 +192,31 @@ psci {
|
|||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
|
||||
CPU_PD0: cpu-pd0 {
|
||||
CPU_PD0: power-domain-cpu0 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_PD>;
|
||||
domain-idle-states = <&CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD1: cpu-pd1 {
|
||||
CPU_PD1: power-domain-cpu1 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_PD>;
|
||||
domain-idle-states = <&CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD2: cpu-pd2 {
|
||||
CPU_PD2: power-domain-cpu2 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_PD>;
|
||||
domain-idle-states = <&CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CPU_PD3: cpu-pd3 {
|
||||
CPU_PD3: power-domain-cpu3 {
|
||||
#power-domain-cells = <0>;
|
||||
power-domains = <&CLUSTER_PD>;
|
||||
domain-idle-states = <&CPU_SLEEP_0>;
|
||||
};
|
||||
|
||||
CLUSTER_PD: cluster-pd {
|
||||
CLUSTER_PD: power-domain-cluster {
|
||||
#power-domain-cells = <0>;
|
||||
domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
|
||||
};
|
||||
|
|
@ -261,7 +265,7 @@ cpu2_3-thermal {
|
|||
thermal-sensors = <&tsens 4>;
|
||||
|
||||
trips {
|
||||
cpu2_3_alert0: trip-point@0 {
|
||||
cpu2_3_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -291,7 +295,7 @@ gpu-thermal {
|
|||
thermal-sensors = <&tsens 2>;
|
||||
|
||||
trips {
|
||||
gpu_alert0: trip-point@0 {
|
||||
gpu_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -311,7 +315,7 @@ camera-thermal {
|
|||
thermal-sensors = <&tsens 1>;
|
||||
|
||||
trips {
|
||||
cam_alert0: trip-point@0 {
|
||||
cam_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -326,7 +330,7 @@ modem-thermal {
|
|||
thermal-sensors = <&tsens 0>;
|
||||
|
||||
trips {
|
||||
modem_alert0: trip-point@0 {
|
||||
modem_alert0: trip-point0 {
|
||||
temperature = <85000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -336,7 +340,7 @@ modem_alert0: trip-point@0 {
|
|||
|
||||
};
|
||||
|
||||
cpu_opp_table: cpu_opp_table {
|
||||
cpu_opp_table: cpu-opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
|
|
@ -354,17 +358,6 @@ opp-998400000 {
|
|||
};
|
||||
};
|
||||
|
||||
gpu_opp_table: opp_table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
};
|
||||
opp-19200000 {
|
||||
opp-hz = /bits/ 64 <19200000>;
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
|
|
@ -374,13 +367,13 @@ timer {
|
|||
};
|
||||
|
||||
clocks {
|
||||
xo_board: xo_board {
|
||||
xo_board: xo-board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
sleep_clk: sleep_clk {
|
||||
sleep_clk: sleep-clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
|
|
@ -608,6 +601,21 @@ blsp_spi6: spi@78ba000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_i2c1: i2c@78b5000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b5000 0x500>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
|
||||
clock-names = "iface", "core";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c1_default>;
|
||||
pinctrl-1 = <&i2c1_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_i2c2: i2c@78b6000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b6000 0x500>;
|
||||
|
|
@ -638,6 +646,21 @@ blsp_i2c4: i2c@78b8000 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_i2c5: i2c@78b9000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078b9000 0x500>;
|
||||
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
|
||||
<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
|
||||
clock-names = "iface", "core";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c5_default>;
|
||||
pinctrl-1 = <&i2c5_sleep>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
blsp_i2c6: i2c@78ba000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x078ba000 0x500>;
|
||||
|
|
@ -955,6 +978,17 @@ gpu@1c00000 {
|
|||
power-domains = <&gcc OXILI_GDSC>;
|
||||
operating-points-v2 = <&gpu_opp_table>;
|
||||
iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
|
||||
|
||||
gpu_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
};
|
||||
opp-19200000 {
|
||||
opp-hz = /bits/ 64 <19200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdss: mdss@1a00000 {
|
||||
|
|
@ -1224,6 +1258,8 @@ tpiu@820000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
in-ports {
|
||||
port {
|
||||
tpiu_in: endpoint {
|
||||
|
|
@ -1240,6 +1276,8 @@ funnel@821000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
in-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -1279,6 +1317,8 @@ replicator@824000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
out-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -1313,6 +1353,8 @@ etf@825000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
in-ports {
|
||||
port {
|
||||
etf_in: endpoint {
|
||||
|
|
@ -1337,6 +1379,8 @@ etr@826000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
in-ports {
|
||||
port {
|
||||
etr_in: endpoint {
|
||||
|
|
@ -1353,6 +1397,8 @@ funnel@841000 { /* APSS funnel only 4 inputs are used */
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
|
||||
clock-names = "apb_pclk", "atclk";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
in-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -1398,6 +1444,7 @@ debug@850000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
cpu = <&CPU0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
debug@852000 {
|
||||
|
|
@ -1406,6 +1453,7 @@ debug@852000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
cpu = <&CPU1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
debug@854000 {
|
||||
|
|
@ -1414,6 +1462,7 @@ debug@854000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
cpu = <&CPU2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
debug@856000 {
|
||||
|
|
@ -1422,9 +1471,10 @@ debug@856000 {
|
|||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
cpu = <&CPU3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
etm@85c000 {
|
||||
etm0: etm@85c000 {
|
||||
compatible = "arm,coresight-etm4x", "arm,primecell";
|
||||
reg = <0x85c000 0x1000>;
|
||||
|
||||
|
|
@ -1434,6 +1484,8 @@ etm@85c000 {
|
|||
|
||||
cpu = <&CPU0>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
etm0_out: endpoint {
|
||||
|
|
@ -1443,7 +1495,7 @@ etm0_out: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
etm@85d000 {
|
||||
etm1: etm@85d000 {
|
||||
compatible = "arm,coresight-etm4x", "arm,primecell";
|
||||
reg = <0x85d000 0x1000>;
|
||||
|
||||
|
|
@ -1453,6 +1505,8 @@ etm@85d000 {
|
|||
|
||||
cpu = <&CPU1>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
etm1_out: endpoint {
|
||||
|
|
@ -1462,7 +1516,7 @@ etm1_out: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
etm@85e000 {
|
||||
etm2: etm@85e000 {
|
||||
compatible = "arm,coresight-etm4x", "arm,primecell";
|
||||
reg = <0x85e000 0x1000>;
|
||||
|
||||
|
|
@ -1472,6 +1526,8 @@ etm@85e000 {
|
|||
|
||||
cpu = <&CPU2>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
etm2_out: endpoint {
|
||||
|
|
@ -1481,7 +1537,7 @@ etm2_out: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
etm@85f000 {
|
||||
etm3: etm@85f000 {
|
||||
compatible = "arm,coresight-etm4x", "arm,primecell";
|
||||
reg = <0x85f000 0x1000>;
|
||||
|
||||
|
|
@ -1491,6 +1547,8 @@ etm@85f000 {
|
|||
|
||||
cpu = <&CPU3>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
out-ports {
|
||||
port {
|
||||
etm3_out: endpoint {
|
||||
|
|
@ -1500,6 +1558,93 @@ etm3_out: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
/* System CTIs */
|
||||
/* CTI 0 - TMC connections */
|
||||
cti@810000 {
|
||||
compatible = "arm,coresight-cti", "arm,primecell";
|
||||
reg = <0x810000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* CTI 1 - TPIU connections */
|
||||
cti@811000 {
|
||||
compatible = "arm,coresight-cti", "arm,primecell";
|
||||
reg = <0x811000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* CTIs 2-11 - no information - not instantiated */
|
||||
|
||||
/* Core CTIs; CTIs 12-15 */
|
||||
/* CTI - CPU-0 */
|
||||
cti@858000 {
|
||||
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
|
||||
"arm,primecell";
|
||||
reg = <0x858000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
cpu = <&CPU0>;
|
||||
arm,cs-dev-assoc = <&etm0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* CTI - CPU-1 */
|
||||
cti@859000 {
|
||||
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
|
||||
"arm,primecell";
|
||||
reg = <0x859000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
cpu = <&CPU1>;
|
||||
arm,cs-dev-assoc = <&etm1>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* CTI - CPU-2 */
|
||||
cti@85a000 {
|
||||
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
|
||||
"arm,primecell";
|
||||
reg = <0x85a000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
cpu = <&CPU2>;
|
||||
arm,cs-dev-assoc = <&etm2>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* CTI - CPU-3 */
|
||||
cti@85b000 {
|
||||
compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
|
||||
"arm,primecell";
|
||||
reg = <0x85b000 0x1000>;
|
||||
|
||||
clocks = <&rpmcc RPM_QDSS_CLK>;
|
||||
clock-names = "apb_pclk";
|
||||
|
||||
cpu = <&CPU3>;
|
||||
arm,cs-dev-assoc = <&etm3>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
||||
venus: video-codec@1d00000 {
|
||||
compatible = "qcom,msm8916-venus";
|
||||
reg = <0x01d00000 0xff000>;
|
||||
|
|
@ -1601,6 +1746,33 @@ ports {
|
|||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
cci: cci@1b0c000 {
|
||||
compatible = "qcom,msm8916-cci";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1b0c000 0x1000>;
|
||||
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
|
||||
<&gcc GCC_CAMSS_CCI_AHB_CLK>,
|
||||
<&gcc GCC_CAMSS_CCI_CLK>,
|
||||
<&gcc GCC_CAMSS_AHB_CLK>;
|
||||
clock-names = "camss_top_ahb", "cci_ahb",
|
||||
"cci", "camss_ahb";
|
||||
assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
|
||||
<&gcc GCC_CAMSS_CCI_CLK>;
|
||||
assigned-clock-rates = <80000000>, <19200000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cci0_default>;
|
||||
status = "disabled";
|
||||
|
||||
cci_i2c0: i2c-bus@0 {
|
||||
reg = <0>;
|
||||
clock-frequency = <400000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
smd {
|
||||
|
|
@ -1611,7 +1783,7 @@ rpm {
|
|||
qcom,ipc = <&apcs 8 0>;
|
||||
qcom,smd-edge = <15>;
|
||||
|
||||
rpm_requests {
|
||||
rpm-requests {
|
||||
compatible = "qcom,rpm-msm8916";
|
||||
qcom,smd-channels = "rpm_requests";
|
||||
|
||||
|
|
|
|||
|
|
@ -639,7 +639,7 @@ gpu@b00000 {
|
|||
"mem",
|
||||
"mem_iface";
|
||||
|
||||
power-domains = <&mmcc GPU_GDSC>;
|
||||
power-domains = <&mmcc GPU_GX_GDSC>;
|
||||
iommus = <&adreno_smmu 0>;
|
||||
|
||||
nvmem-cells = <&gpu_speed_bin>;
|
||||
|
|
@ -989,16 +989,16 @@ camss: camss@a00000 {
|
|||
"csi_clk_mux",
|
||||
"vfe0",
|
||||
"vfe1";
|
||||
interrupts = <GIC_SPI 78 0>,
|
||||
<GIC_SPI 79 0>,
|
||||
<GIC_SPI 80 0>,
|
||||
<GIC_SPI 296 0>,
|
||||
<GIC_SPI 297 0>,
|
||||
<GIC_SPI 298 0>,
|
||||
<GIC_SPI 299 0>,
|
||||
<GIC_SPI 309 0>,
|
||||
<GIC_SPI 314 0>,
|
||||
<GIC_SPI 315 0>;
|
||||
interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
|
||||
<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "csiphy0",
|
||||
"csiphy1",
|
||||
"csiphy2",
|
||||
|
|
@ -1093,6 +1093,43 @@ ports {
|
|||
};
|
||||
};
|
||||
|
||||
cci: cci@a0c000 {
|
||||
compatible = "qcom,msm8996-cci";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0xa0c000 0x1000>;
|
||||
interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
|
||||
power-domains = <&mmcc CAMSS_GDSC>;
|
||||
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
|
||||
<&mmcc CAMSS_CCI_AHB_CLK>,
|
||||
<&mmcc CAMSS_CCI_CLK>,
|
||||
<&mmcc CAMSS_AHB_CLK>;
|
||||
clock-names = "camss_top_ahb",
|
||||
"cci_ahb",
|
||||
"cci",
|
||||
"camss_ahb";
|
||||
assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
|
||||
<&mmcc CAMSS_CCI_CLK>;
|
||||
assigned-clock-rates = <80000000>, <37500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cci0_default &cci1_default>;
|
||||
status = "disabled";
|
||||
|
||||
cci_i2c0: i2c-bus@0 {
|
||||
reg = <0>;
|
||||
clock-frequency = <400000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
cci_i2c1: i2c-bus@1 {
|
||||
reg = <1>;
|
||||
clock-frequency = <400000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
adreno_smmu: iommu@b40000 {
|
||||
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
|
||||
reg = <0x00b40000 0x10000>;
|
||||
|
|
@ -2178,7 +2215,7 @@ cpu0-thermal {
|
|||
thermal-sensors = <&tsens0 3>;
|
||||
|
||||
trips {
|
||||
cpu0_alert0: trip-point@0 {
|
||||
cpu0_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -2199,7 +2236,7 @@ cpu1-thermal {
|
|||
thermal-sensors = <&tsens0 5>;
|
||||
|
||||
trips {
|
||||
cpu1_alert0: trip-point@0 {
|
||||
cpu1_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -2220,7 +2257,7 @@ cpu2-thermal {
|
|||
thermal-sensors = <&tsens0 8>;
|
||||
|
||||
trips {
|
||||
cpu2_alert0: trip-point@0 {
|
||||
cpu2_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -2241,7 +2278,7 @@ cpu3-thermal {
|
|||
thermal-sensors = <&tsens0 10>;
|
||||
|
||||
trips {
|
||||
cpu3_alert0: trip-point@0 {
|
||||
cpu3_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -2262,7 +2299,7 @@ gpu-thermal-top {
|
|||
thermal-sensors = <&tsens1 6>;
|
||||
|
||||
trips {
|
||||
gpu1_alert0: trip-point@0 {
|
||||
gpu1_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2277,7 +2314,7 @@ gpu-thermal-bottom {
|
|||
thermal-sensors = <&tsens1 7>;
|
||||
|
||||
trips {
|
||||
gpu2_alert0: trip-point@0 {
|
||||
gpu2_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2292,7 +2329,7 @@ m4m-thermal {
|
|||
thermal-sensors = <&tsens0 1>;
|
||||
|
||||
trips {
|
||||
m4m_alert0: trip-point@0 {
|
||||
m4m_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2307,7 +2344,7 @@ l3-or-venus-thermal {
|
|||
thermal-sensors = <&tsens0 2>;
|
||||
|
||||
trips {
|
||||
l3_or_venus_alert0: trip-point@0 {
|
||||
l3_or_venus_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2322,7 +2359,7 @@ cluster0-l2-thermal {
|
|||
thermal-sensors = <&tsens0 7>;
|
||||
|
||||
trips {
|
||||
cluster0_l2_alert0: trip-point@0 {
|
||||
cluster0_l2_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2337,7 +2374,7 @@ cluster1-l2-thermal {
|
|||
thermal-sensors = <&tsens0 12>;
|
||||
|
||||
trips {
|
||||
cluster1_l2_alert0: trip-point@0 {
|
||||
cluster1_l2_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2352,7 +2389,7 @@ camera-thermal {
|
|||
thermal-sensors = <&tsens1 1>;
|
||||
|
||||
trips {
|
||||
camera_alert0: trip-point@0 {
|
||||
camera_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2367,7 +2404,7 @@ q6-dsp-thermal {
|
|||
thermal-sensors = <&tsens1 2>;
|
||||
|
||||
trips {
|
||||
q6_dsp_alert0: trip-point@0 {
|
||||
q6_dsp_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2382,7 +2419,7 @@ mem-thermal {
|
|||
thermal-sensors = <&tsens1 3>;
|
||||
|
||||
trips {
|
||||
mem_alert0: trip-point@0 {
|
||||
mem_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -2397,7 +2434,7 @@ modemtx-thermal {
|
|||
thermal-sensors = <&tsens1 4>;
|
||||
|
||||
trips {
|
||||
modemtx_alert0: trip-point@0 {
|
||||
modemtx_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
|
|||
|
|
@ -500,7 +500,7 @@ cpu0-thermal {
|
|||
thermal-sensors = <&tsens0 1>;
|
||||
|
||||
trips {
|
||||
cpu0_alert0: trip-point@0 {
|
||||
cpu0_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -521,7 +521,7 @@ cpu1-thermal {
|
|||
thermal-sensors = <&tsens0 2>;
|
||||
|
||||
trips {
|
||||
cpu1_alert0: trip-point@0 {
|
||||
cpu1_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -542,7 +542,7 @@ cpu2-thermal {
|
|||
thermal-sensors = <&tsens0 3>;
|
||||
|
||||
trips {
|
||||
cpu2_alert0: trip-point@0 {
|
||||
cpu2_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -563,7 +563,7 @@ cpu3-thermal {
|
|||
thermal-sensors = <&tsens0 4>;
|
||||
|
||||
trips {
|
||||
cpu3_alert0: trip-point@0 {
|
||||
cpu3_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -584,7 +584,7 @@ cpu4-thermal {
|
|||
thermal-sensors = <&tsens0 7>;
|
||||
|
||||
trips {
|
||||
cpu4_alert0: trip-point@0 {
|
||||
cpu4_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -605,7 +605,7 @@ cpu5-thermal {
|
|||
thermal-sensors = <&tsens0 8>;
|
||||
|
||||
trips {
|
||||
cpu5_alert0: trip-point@0 {
|
||||
cpu5_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -626,7 +626,7 @@ cpu6-thermal {
|
|||
thermal-sensors = <&tsens0 9>;
|
||||
|
||||
trips {
|
||||
cpu6_alert0: trip-point@0 {
|
||||
cpu6_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -647,7 +647,7 @@ cpu7-thermal {
|
|||
thermal-sensors = <&tsens0 10>;
|
||||
|
||||
trips {
|
||||
cpu7_alert0: trip-point@0 {
|
||||
cpu7_alert0: trip-point0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
|
|
@ -668,7 +668,7 @@ gpu-thermal-bottom {
|
|||
thermal-sensors = <&tsens0 12>;
|
||||
|
||||
trips {
|
||||
gpu1_alert0: trip-point@0 {
|
||||
gpu1_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -683,7 +683,7 @@ gpu-thermal-top {
|
|||
thermal-sensors = <&tsens0 13>;
|
||||
|
||||
trips {
|
||||
gpu2_alert0: trip-point@0 {
|
||||
gpu2_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -698,7 +698,7 @@ clust0-mhm-thermal {
|
|||
thermal-sensors = <&tsens0 5>;
|
||||
|
||||
trips {
|
||||
cluster0_mhm_alert0: trip-point@0 {
|
||||
cluster0_mhm_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -713,7 +713,7 @@ clust1-mhm-thermal {
|
|||
thermal-sensors = <&tsens0 6>;
|
||||
|
||||
trips {
|
||||
cluster1_mhm_alert0: trip-point@0 {
|
||||
cluster1_mhm_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -728,7 +728,7 @@ cluster1-l2-thermal {
|
|||
thermal-sensors = <&tsens0 11>;
|
||||
|
||||
trips {
|
||||
cluster1_l2_alert0: trip-point@0 {
|
||||
cluster1_l2_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -743,7 +743,7 @@ modem-thermal {
|
|||
thermal-sensors = <&tsens1 1>;
|
||||
|
||||
trips {
|
||||
modem_alert0: trip-point@0 {
|
||||
modem_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -758,7 +758,7 @@ mem-thermal {
|
|||
thermal-sensors = <&tsens1 2>;
|
||||
|
||||
trips {
|
||||
mem_alert0: trip-point@0 {
|
||||
mem_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -773,7 +773,7 @@ wlan-thermal {
|
|||
thermal-sensors = <&tsens1 3>;
|
||||
|
||||
trips {
|
||||
wlan_alert0: trip-point@0 {
|
||||
wlan_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -788,7 +788,7 @@ q6-dsp-thermal {
|
|||
thermal-sensors = <&tsens1 4>;
|
||||
|
||||
trips {
|
||||
q6_dsp_alert0: trip-point@0 {
|
||||
q6_dsp_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -803,7 +803,7 @@ camera-thermal {
|
|||
thermal-sensors = <&tsens1 5>;
|
||||
|
||||
trips {
|
||||
camera_alert0: trip-point@0 {
|
||||
camera_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
@ -818,7 +818,7 @@ multimedia-thermal {
|
|||
thermal-sensors = <&tsens1 6>;
|
||||
|
||||
trips {
|
||||
multimedia_alert0: trip-point@0 {
|
||||
multimedia_alert0: trip-point0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
|
|
|
|||
|
|
@ -73,18 +73,8 @@ pm8150_gpios: gpio@c000 {
|
|||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc1 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc2 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc3 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc4 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc5 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc6 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc7 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc8 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xc9 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xca 0x0 IRQ_TYPE_NONE>,
|
||||
<0x0 0xcb 0x0 IRQ_TYPE_NONE>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -62,18 +62,8 @@ pm8150b_gpios: gpio@c000 {
|
|||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc1 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc2 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc3 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc4 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc5 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc6 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc7 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc8 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xc9 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xca 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xcb 0x0 IRQ_TYPE_NONE>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -56,18 +56,8 @@ pm8150l_gpios: gpio@c000 {
|
|||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc1 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc2 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc3 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc4 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc5 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc6 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc7 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc8 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xc9 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xca 0x0 IRQ_TYPE_NONE>,
|
||||
<0x4 0xcb 0x0 IRQ_TYPE_NONE>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -26,5 +26,11 @@ pmic@3 {
|
|||
reg = <0x3 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmi8994_spmi_regulators: regulators {
|
||||
compatible = "qcom,pmi8994-regulators";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "qcs404.dtsi"
|
||||
#include "pms405.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
|
|
@ -31,6 +33,21 @@ vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
|
|||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb3_vbus_reg: regulator-usb3-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBUS_BOOST_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_vbus_boost_pin>;
|
||||
vin-supply = <&vph_pwr>;
|
||||
enable-active-high;
|
||||
|
||||
/* TODO: Drop this when introducing role switching */
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3 {
|
||||
|
|
@ -186,7 +203,7 @@ vreg_l11_sdc2: l11 {
|
|||
};
|
||||
|
||||
vreg_l12_3p3: l12 {
|
||||
regulator-min-microvolt = <2968000>;
|
||||
regulator-min-microvolt = <3050000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
|
|
@ -270,6 +287,72 @@ rclk {
|
|||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
usb3_id_pin: usb3-id-pin {
|
||||
pinmux {
|
||||
pins = "gpio116";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio116";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pms405_gpios {
|
||||
usb_vbus_boost_pin: usb-vbus-boost-pin {
|
||||
pinconf {
|
||||
pins = "gpio3";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
output-low;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
usb3_vbus_pin: usb3-vbus-pin {
|
||||
pinconf {
|
||||
pins = "gpio12";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
input-enable;
|
||||
bias-pull-down;
|
||||
power-source = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy_sec {
|
||||
vdd-supply = <&vreg_l4_1p2>;
|
||||
vdda1p8-supply = <&vreg_l5_1p8>;
|
||||
vdda3p3-supply = <&vreg_l12_3p3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
|
||||
dwc3@7580000 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy_prim {
|
||||
vdd-supply = <&vreg_l4_1p2>;
|
||||
vdda1p8-supply = <&vreg_l5_1p8>;
|
||||
vdda3p3-supply = <&vreg_l12_3p3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
vdd-supply = <&vreg_l3_1p05>;
|
||||
vdda1p8-supply = <&vreg_l5_1p8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
|
|
|
|||
|
|
@ -323,6 +323,48 @@ rpm_msg_ram: memory@60000 {
|
|||
reg = <0x00060000 0x6000>;
|
||||
};
|
||||
|
||||
usb3_phy: phy@78000 {
|
||||
compatible = "qcom,usb-ss-28nm-phy";
|
||||
reg = <0x00078000 0x400>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
|
||||
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
|
||||
<&gcc GCC_USB3_PHY_PIPE_CLK>;
|
||||
clock-names = "ref", "ahb", "pipe";
|
||||
resets = <&gcc GCC_USB3_PHY_BCR>,
|
||||
<&gcc GCC_USB3PHY_PHY_BCR>;
|
||||
reset-names = "com", "phy";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb2_phy_prim: phy@7a000 {
|
||||
compatible = "qcom,usb-hs-28nm-femtophy";
|
||||
reg = <0x0007a000 0x200>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
|
||||
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
|
||||
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
|
||||
clock-names = "ref", "ahb", "sleep";
|
||||
resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
|
||||
<&gcc GCC_USB2A_PHY_BCR>;
|
||||
reset-names = "phy", "por";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usb2_phy_sec: phy@7c000 {
|
||||
compatible = "qcom,usb-hs-28nm-femtophy";
|
||||
reg = <0x0007c000 0x200>;
|
||||
#phy-cells = <0>;
|
||||
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
|
||||
<&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
|
||||
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
|
||||
clock-names = "ref", "ahb", "sleep";
|
||||
resets = <&gcc GCC_QUSB2_PHY_BCR>,
|
||||
<&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
|
||||
reset-names = "phy", "por";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
qfprom: qfprom@a4000 {
|
||||
compatible = "qcom,qfprom";
|
||||
reg = <0x000a4000 0x1000>;
|
||||
|
|
@ -486,6 +528,64 @@ glink-edge {
|
|||
};
|
||||
};
|
||||
|
||||
usb3: usb@7678800 {
|
||||
compatible = "qcom,dwc3";
|
||||
reg = <0x07678800 0x400>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
clocks = <&gcc GCC_USB30_MASTER_CLK>,
|
||||
<&gcc GCC_SYS_NOC_USB3_CLK>,
|
||||
<&gcc GCC_USB30_SLEEP_CLK>,
|
||||
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
|
||||
clock-names = "core", "iface", "sleep", "mock_utmi";
|
||||
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
|
||||
<&gcc GCC_USB30_MASTER_CLK>;
|
||||
assigned-clock-rates = <19200000>, <200000000>;
|
||||
status = "disabled";
|
||||
|
||||
dwc3@7580000 {
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x07580000 0xcd00>;
|
||||
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usb2_phy_sec>, <&usb3_phy>;
|
||||
phy-names = "usb2-phy", "usb3-phy";
|
||||
snps,has-lpm-erratum;
|
||||
snps,hird-threshold = /bits/ 8 <0x10>;
|
||||
snps,usb3_lpm_capable;
|
||||
dr_mode = "otg";
|
||||
};
|
||||
};
|
||||
|
||||
usb2: usb@79b8800 {
|
||||
compatible = "qcom,dwc3";
|
||||
reg = <0x079b8800 0x400>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
|
||||
<&gcc GCC_PCNOC_USB2_CLK>,
|
||||
<&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
|
||||
<&gcc GCC_USB20_MOCK_UTMI_CLK>;
|
||||
clock-names = "core", "iface", "sleep", "mock_utmi";
|
||||
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
|
||||
<&gcc GCC_USB_HS_SYSTEM_CLK>;
|
||||
assigned-clock-rates = <19200000>, <133333333>;
|
||||
status = "disabled";
|
||||
|
||||
dwc3@78c0000 {
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x078c0000 0xcc00>;
|
||||
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usb2_phy_prim>;
|
||||
phy-names = "usb2-phy";
|
||||
snps,has-lpm-erratum;
|
||||
snps,hird-threshold = /bits/ 8 <0x10>;
|
||||
snps,usb3_lpm_capable;
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
};
|
||||
|
||||
tlmm: pinctrl@1000000 {
|
||||
compatible = "qcom,qcs404-pinctrl";
|
||||
reg = <0x01000000 0x200000>,
|
||||
|
|
|
|||
|
|
@ -28,6 +28,59 @@ chosen {
|
|||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Reserved memory changes
|
||||
*
|
||||
* Delete all unused memory nodes and define the peripheral memory regions
|
||||
* required by the board dts.
|
||||
*
|
||||
*/
|
||||
|
||||
/delete-node/ &hyp_mem;
|
||||
/delete-node/ &xbl_mem;
|
||||
/delete-node/ &aop_mem;
|
||||
/delete-node/ &sec_apps_mem;
|
||||
/delete-node/ &tz_mem;
|
||||
|
||||
/* Increase the size from 2MB to 8MB */
|
||||
&rmtfs_mem {
|
||||
reg = <0x0 0x84400000 0x0 0x800000>;
|
||||
};
|
||||
|
||||
/ {
|
||||
reserved-memory {
|
||||
atf_mem: memory@80b00000 {
|
||||
reg = <0x0 0x80b00000 0x0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_mem: memory@86000000 {
|
||||
reg = <0x0 0x86000000 0x0 0x8c00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
camera_mem: memory@8ec00000 {
|
||||
reg = <0x0 0x8ec00000 0x0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@8f600000 {
|
||||
reg = <0 0x8f600000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_mem: memory@94100000 {
|
||||
reg = <0x0 0x94100000 0x0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_mem: memory@94400000 {
|
||||
reg = <0x0 0x94400000 0x0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm6150-rpmh-regulators {
|
||||
compatible = "qcom,pm6150-rpmh-regulators";
|
||||
|
|
@ -256,6 +309,13 @@ &qupv3_id_1 {
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&remoteproc_mpss {
|
||||
status = "okay";
|
||||
compatible = "qcom,sc7180-mss-pil";
|
||||
iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>;
|
||||
memory-region = <&mba_mem &mpss_mem>;
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -310,9 +370,11 @@ &usb_1_hsphy {
|
|||
vdda-pll-supply = <&vreg_l11a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
qcom,bias-ctrl-value = <0x22>;
|
||||
qcom,charge-ctrl-value = <3>;
|
||||
qcom,hsdisc-trim-value = <0>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,46 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sdm660.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xiaomi Redmi Note 7";
|
||||
compatible = "xiaomi,lavender", "qcom,sdm660";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
ramoops@a0000000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xa0000000 0x0 0x400000>;
|
||||
console-size = <0x20000>;
|
||||
record-size = <0x20000>;
|
||||
ftrace-size = <0x0>;
|
||||
pmsg-size = <0x20000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart_console_active>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <8 4>;
|
||||
};
|
||||
|
|
@ -0,0 +1,372 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2018, Craig Tatlor.
|
||||
* Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-sdm660.h>
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
chosen { };
|
||||
|
||||
clocks {
|
||||
xo_board: xo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
clock-output-names = "xo_board";
|
||||
};
|
||||
|
||||
sleep_clk: sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32764>;
|
||||
clock-output-names = "sleep_clk";
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
CPU0: cpu@100 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x100>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
};
|
||||
L1_I_100: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_100: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU1: cpu@101 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x101>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_101: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_101: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU2: cpu@102 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x102>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_102: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_102: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU3: cpu@103 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x103>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_103: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_103: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU4: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <640>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
compatible = "cache";
|
||||
cache-level = <2>;
|
||||
};
|
||||
L1_I_0: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_0: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU5: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <640>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_1: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_1: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU6: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <640>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_2: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_2: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
CPU7: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "qcom,kryo260";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <640>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_3: l1-icache {
|
||||
compatible = "cache";
|
||||
};
|
||||
L1_D_3: l1-dcache {
|
||||
compatible = "cache";
|
||||
};
|
||||
};
|
||||
|
||||
cpu-map {
|
||||
cluster0 {
|
||||
core0 {
|
||||
cpu = <&CPU4>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&CPU5>;
|
||||
};
|
||||
|
||||
core2 {
|
||||
cpu = <&CPU6>;
|
||||
};
|
||||
|
||||
core3 {
|
||||
cpu = <&CPU7>;
|
||||
};
|
||||
};
|
||||
|
||||
cluster1 {
|
||||
core0 {
|
||||
cpu = <&CPU0>;
|
||||
};
|
||||
|
||||
core1 {
|
||||
cpu = <&CPU1>;
|
||||
};
|
||||
|
||||
core2 {
|
||||
cpu = <&CPU2>;
|
||||
};
|
||||
|
||||
core3 {
|
||||
cpu = <&CPU3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
firmware {
|
||||
scm {
|
||||
compatible = "qcom,scm";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
/* We expect the bootloader to fill in the reg */
|
||||
reg = <0 0 0 0>;
|
||||
};
|
||||
|
||||
psci {
|
||||
compatible = "arm,psci-1.0";
|
||||
method = "smc";
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv8-timer";
|
||||
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0 0 0xffffffff>;
|
||||
compatible = "simple-bus";
|
||||
|
||||
gcc: clock-controller@100000 {
|
||||
compatible = "qcom,gcc-sdm660";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
reg = <0x00100000 0x94000>;
|
||||
};
|
||||
|
||||
tlmm: pinctrl@3100000 {
|
||||
compatible = "qcom,sdm660-pinctrl";
|
||||
reg = <0x03100000 0x400000>,
|
||||
<0x03500000 0x400000>,
|
||||
<0x03900000 0x400000>;
|
||||
reg-names = "south", "center", "north";
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&tlmm 0 0 114>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
uart_console_active: uart_console_active {
|
||||
pinmux {
|
||||
pins = "gpio4", "gpio5";
|
||||
function = "blsp_uart2";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio4", "gpio5";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spmi_bus: spmi@800f000 {
|
||||
compatible = "qcom,spmi-pmic-arb";
|
||||
reg = <0x0800f000 0x1000>,
|
||||
<0x08400000 0x1000000>,
|
||||
<0x09400000 0x1000000>,
|
||||
<0x0a400000 0x220000>,
|
||||
<0x0800a000 0x3000>;
|
||||
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
|
||||
interrupt-names = "periph_irq";
|
||||
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
|
||||
qcom,ee = <0>;
|
||||
qcom,channel = <0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
cell-index = <0>;
|
||||
};
|
||||
|
||||
blsp1_uart2: serial@c170000 {
|
||||
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
||||
reg = <0x0c170000 0x1000>;
|
||||
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
|
||||
<&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer@17920000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
compatible = "arm,armv7-timer-mem";
|
||||
reg = <0x17920000 0x1000>;
|
||||
|
||||
frame@17921000 {
|
||||
frame-number = <0>;
|
||||
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17921000 0x1000>,
|
||||
<0x17922000 0x1000>;
|
||||
};
|
||||
|
||||
frame@17923000 {
|
||||
frame-number = <1>;
|
||||
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17923000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@17924000 {
|
||||
frame-number = <2>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17924000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@17925000 {
|
||||
frame-number = <3>;
|
||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17925000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@17926000 {
|
||||
frame-number = <4>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17926000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@17927000 {
|
||||
frame-number = <5>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17927000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
frame@17928000 {
|
||||
frame-number = <6>;
|
||||
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg = <0x17928000 0x1000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@17a00000 {
|
||||
compatible = "arm,gic-v3";
|
||||
reg = <0x17a00000 0x10000>,
|
||||
<0x17b00000 0x100000>;
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
interrupt-controller;
|
||||
#redistributor-regions = <1>;
|
||||
redistributor-stride = <0x0 0x20000>;
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -548,6 +548,8 @@ sn65dsi86_bridge: bridge@2d {
|
|||
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
|
||||
clock-names = "refclk";
|
||||
|
||||
no-hpd;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -112,6 +112,40 @@ pcie0_1p05v: pcie-0-1p05v-regulator {
|
|||
// enable-active-high;
|
||||
};
|
||||
|
||||
cam0_dvdd_1v2: reg_cam0_dvdd_1v2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM0_DVDD_1V2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
enable-active-high;
|
||||
gpio = <&pm8998_gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
|
||||
vin-supply = <&vbat>;
|
||||
};
|
||||
|
||||
cam0_avdd_2v8: reg_cam0_avdd_2v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM0_AVDD_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
enable-active-high;
|
||||
gpio = <&pm8998_gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam0_avdd_2v8_en_default>;
|
||||
vin-supply = <&vbat>;
|
||||
};
|
||||
|
||||
/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
|
||||
cam3_avdd_2v8: reg_cam3_avdd_2v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM3_AVDD_2V8";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vbat>;
|
||||
};
|
||||
|
||||
pcie0_3p3v_dual: vldo-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VLDO_3V3";
|
||||
|
|
@ -412,6 +446,52 @@ &pcie1_phy {
|
|||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
gpio-line-names =
|
||||
"NC",
|
||||
"NC",
|
||||
"WLAN_SW_CTRL",
|
||||
"NC",
|
||||
"PM_GPIO5_BLUE_BT_LED",
|
||||
"VOL_UP_N",
|
||||
"NC",
|
||||
"ADC_IN1",
|
||||
"PM_GPIO9_YEL_WIFI_LED",
|
||||
"CAM0_AVDD_EN",
|
||||
"NC",
|
||||
"CAM0_DVDD_EN",
|
||||
"PM_GPIO13_GREEN_U4_LED",
|
||||
"DIV_CLK2",
|
||||
"NC",
|
||||
"NC",
|
||||
"NC",
|
||||
"SMB_STAT",
|
||||
"NC",
|
||||
"NC",
|
||||
"ADC_IN2",
|
||||
"OPTION1",
|
||||
"WCSS_PWR_REQ",
|
||||
"PM845_GPIO24",
|
||||
"OPTION2",
|
||||
"PM845_SLB";
|
||||
|
||||
cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en {
|
||||
pins = "gpio12";
|
||||
function = "normal";
|
||||
|
||||
bias-pull-up;
|
||||
drive-push-pull;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
||||
};
|
||||
|
||||
cam0_avdd_2v8_en_default: cam0-avdd-2v8-en {
|
||||
pins = "gpio10";
|
||||
function = "normal";
|
||||
|
||||
bias-pull-up;
|
||||
drive-push-pull;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
||||
};
|
||||
|
||||
vol_up_pin_a: vol-up-active {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
|
|
@ -573,6 +653,42 @@ &spi2 {
|
|||
};
|
||||
|
||||
&tlmm {
|
||||
cam0_default: cam0_default {
|
||||
rst {
|
||||
pins = "gpio9";
|
||||
function = "gpio";
|
||||
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mclk0 {
|
||||
pins = "gpio13";
|
||||
function = "cam_mclk";
|
||||
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
cam3_default: cam3_default {
|
||||
rst {
|
||||
function = "gpio";
|
||||
pins = "gpio21";
|
||||
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mclk3 {
|
||||
function = "cam_mclk";
|
||||
pins = "gpio16";
|
||||
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pcie0_default_state: pcie0-default {
|
||||
clkreq {
|
||||
pins = "gpio36";
|
||||
|
|
@ -866,3 +982,97 @@ pinconf-rx {
|
|||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
|
||||
};
|
||||
|
||||
&cci {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&cci_i2c0 {
|
||||
camera@10 {
|
||||
compatible = "ovti,ov8856";
|
||||
reg = <0x10>;
|
||||
|
||||
// CAM0_RST_N
|
||||
reset-gpios = <&tlmm 9 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam0_default>;
|
||||
gpios = <&tlmm 13 0>,
|
||||
<&tlmm 9 0>;
|
||||
|
||||
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
|
||||
clock-names = "xvclk";
|
||||
clock-frequency = <19200000>;
|
||||
|
||||
/* The &vreg_s4a_1p8 trace is powered on as a,
|
||||
* so it is represented by a fixed regulator.
|
||||
*
|
||||
* The 2.8V vdda-supply and 1.2V vddd-supply regulators
|
||||
* both have to be enabled through the power management
|
||||
* gpios.
|
||||
*/
|
||||
power-domains = <&clock_camcc TITAN_TOP_GDSC>;
|
||||
|
||||
dovdd-supply = <&vreg_lvs1a_1p8>;
|
||||
avdd-supply = <&cam0_avdd_2v8>;
|
||||
dvdd-supply = <&cam0_dvdd_1v2>;
|
||||
|
||||
status = "disable";
|
||||
|
||||
port {
|
||||
ov8856_ep: endpoint {
|
||||
clock-lanes = <1>;
|
||||
link-frequencies = /bits/ 64
|
||||
<360000000 180000000>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
// remote-endpoint = <&csiphy0_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cci_i2c1 {
|
||||
camera@60 {
|
||||
compatible = "ovti,ov7251";
|
||||
|
||||
// I2C address as per ov7251.txt linux documentation
|
||||
reg = <0x60>;
|
||||
|
||||
// CAM3_RST_N
|
||||
enable-gpios = <&tlmm 21 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cam3_default>;
|
||||
gpios = <&tlmm 16 0>,
|
||||
<&tlmm 21 0>;
|
||||
|
||||
clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
|
||||
clock-names = "xclk";
|
||||
clock-frequency = <24000000>;
|
||||
|
||||
/* The &vreg_s4a_1p8 trace always powered on.
|
||||
*
|
||||
* The 2.8V vdda-supply regulator is enabled when the
|
||||
* vreg_s4a_1p8 trace is pulled high.
|
||||
* It too is represented by a fixed regulator.
|
||||
*
|
||||
* No 1.2V vddd-supply regulator is used.
|
||||
*/
|
||||
power-domains = <&clock_camcc TITAN_TOP_GDSC>;
|
||||
|
||||
vdddo-supply = <&vreg_lvs1a_1p8>;
|
||||
vdda-supply = <&cam3_avdd_2v8>;
|
||||
|
||||
status = "disable";
|
||||
|
||||
port {
|
||||
ov7251_ep: endpoint {
|
||||
clock-lanes = <1>;
|
||||
data-lanes = <0 1>;
|
||||
// remote-endpoint = <&csiphy3_ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@
|
|||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. SDM845 MTP";
|
||||
compatible = "qcom,sdm845-mtp";
|
||||
compatible = "qcom,sdm845-mtp", "qcom,sdm845";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart9;
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/qcom,camcc-sdm845.h>
|
||||
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
||||
#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
|
||||
|
|
@ -1761,6 +1762,8 @@ ufs_mem_phy_lanes: lanes@1d87400 {
|
|||
|
||||
ipa: ipa@1e40000 {
|
||||
compatible = "qcom,sdm845-ipa";
|
||||
|
||||
iommus = <&apps_smmu 0x720 0x3>;
|
||||
reg = <0 0x1e40000 0 0x7000>,
|
||||
<0 0x1e47000 0 0x2000>,
|
||||
<0 0x1e04000 0 0x2c000>;
|
||||
|
|
@ -1813,6 +1816,42 @@ tlmm: pinctrl@3400000 {
|
|||
gpio-ranges = <&tlmm 0 0 150>;
|
||||
wakeup-parent = <&pdc_intc>;
|
||||
|
||||
cci0_default: cci0-default {
|
||||
/* SDA, SCL */
|
||||
pins = "gpio17", "gpio18";
|
||||
function = "cci_i2c";
|
||||
|
||||
bias-pull-up;
|
||||
drive-strength = <2>; /* 2 mA */
|
||||
};
|
||||
|
||||
cci0_sleep: cci0-sleep {
|
||||
/* SDA, SCL */
|
||||
pins = "gpio17", "gpio18";
|
||||
function = "cci_i2c";
|
||||
|
||||
drive-strength = <2>; /* 2 mA */
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
cci1_default: cci1-default {
|
||||
/* SDA, SCL */
|
||||
pins = "gpio19", "gpio20";
|
||||
function = "cci_i2c";
|
||||
|
||||
bias-pull-up;
|
||||
drive-strength = <2>; /* 2 mA */
|
||||
};
|
||||
|
||||
cci1_sleep: cci1-sleep {
|
||||
/* SDA, SCL */
|
||||
pins = "gpio19", "gpio20";
|
||||
function = "cci_i2c";
|
||||
|
||||
drive-strength = <2>; /* 2 mA */
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
qspi_clk: qspi-clk {
|
||||
pinmux {
|
||||
pins = "gpio95";
|
||||
|
|
@ -2970,7 +3009,7 @@ sound: sound {
|
|||
};
|
||||
|
||||
usb_1_hsphy: phy@88e2000 {
|
||||
compatible = "qcom,sdm845-qusb2-phy";
|
||||
compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
|
||||
reg = <0 0x088e2000 0 0x400>;
|
||||
status = "disabled";
|
||||
#phy-cells = <0>;
|
||||
|
|
@ -2985,7 +3024,7 @@ usb_1_hsphy: phy@88e2000 {
|
|||
};
|
||||
|
||||
usb_2_hsphy: phy@88e3000 {
|
||||
compatible = "qcom,sdm845-qusb2-phy";
|
||||
compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
|
||||
reg = <0 0x088e3000 0 0x400>;
|
||||
status = "disabled";
|
||||
#phy-cells = <0>;
|
||||
|
|
@ -3194,6 +3233,61 @@ videocc: clock-controller@ab00000 {
|
|||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
cci: cci@ac4a000 {
|
||||
compatible = "qcom,sdm845-cci";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reg = <0 0x0ac4a000 0 0x4000>;
|
||||
interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
|
||||
power-domains = <&clock_camcc TITAN_TOP_GDSC>;
|
||||
|
||||
clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
|
||||
<&clock_camcc CAM_CC_SOC_AHB_CLK>,
|
||||
<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
|
||||
<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
|
||||
<&clock_camcc CAM_CC_CCI_CLK>,
|
||||
<&clock_camcc CAM_CC_CCI_CLK_SRC>;
|
||||
clock-names = "camnoc_axi",
|
||||
"soc_ahb",
|
||||
"slow_ahb_src",
|
||||
"cpas_ahb",
|
||||
"cci",
|
||||
"cci_src";
|
||||
|
||||
assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
|
||||
<&clock_camcc CAM_CC_CCI_CLK>;
|
||||
assigned-clock-rates = <80000000>, <37500000>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cci0_default &cci1_default>;
|
||||
pinctrl-1 = <&cci0_sleep &cci1_sleep>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
cci_i2c0: i2c-bus@0 {
|
||||
reg = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
cci_i2c1: i2c-bus@1 {
|
||||
reg = <1>;
|
||||
clock-frequency = <1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
clock_camcc: clock-controller@ad00000 {
|
||||
compatible = "qcom,sdm845-camcc";
|
||||
reg = <0 0x0ad00000 0 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
|
||||
mdss: mdss@ae00000 {
|
||||
compatible = "qcom,sdm845-mdss";
|
||||
reg = <0 0x0ae00000 0 0x1000>;
|
||||
|
|
|
|||
|
|
@ -482,6 +482,8 @@ bluetooth {
|
|||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <600000>;
|
||||
};
|
||||
|
|
@ -579,3 +581,14 @@ right_spkr: wsa8810-right{
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
|
||||
qcom,snoc-host-cap-8bit-quirk;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sm8250.dtsi"
|
||||
|
||||
/ {
|
||||
|
|
@ -18,6 +19,336 @@ aliases {
|
|||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: pm8150-s4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
vreg_s6c_0p88: smpc6-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s6c_0p88";
|
||||
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm8150-rpmh-regulators {
|
||||
compatible = "qcom,pm8150-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
|
||||
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
vreg_s5a_1p9: smps5 {
|
||||
regulator-name = "vreg_s5a_1p9";
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p95: smps6 {
|
||||
regulator-name = "vreg_s6a_0p95";
|
||||
regulator-min-microvolt = <920000>;
|
||||
regulator-max-microvolt = <1128000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2a_3p1: ldo2 {
|
||||
regulator-name = "vreg_l2a_3p1";
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3a_0p9: ldo3 {
|
||||
regulator-name = "vreg_l3a_0p9";
|
||||
regulator-min-microvolt = <928000>;
|
||||
regulator-max-microvolt = <932000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p875: ldo5 {
|
||||
regulator-name = "vreg_l5a_0p875";
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p2: ldo6 {
|
||||
regulator-name = "vreg_l6a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p7: ldo7 {
|
||||
regulator-name = "vreg_l7a_1p7";
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p2: ldo9 {
|
||||
regulator-name = "vreg_l9a_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
regulator-name = "vreg_l10a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_0p75: ldo11 {
|
||||
regulator-name = "vreg_l11a_0p75";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-name = "vreg_l12a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_ts_3p0: ldo13 {
|
||||
regulator-name = "vreg_l13a_ts_3p0";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-name = "vreg_l14a_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_11ad_io_1p8: ldo15 {
|
||||
regulator-name = "vreg_l15a_11ad_io_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-name = "vreg_l16a_2p7";
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_3p0: ldo17 {
|
||||
regulator-name = "vreg_l17a_3p0";
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8150l-rpmh-regulators {
|
||||
compatible = "qcom,pm8150l-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
|
||||
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l4-l5-l6-supply = <&vreg_bob>;
|
||||
vdd-l7-l11-supply = <&vreg_bob>;
|
||||
vdd-l9-l10-supply = <&vreg_bob>;
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-name = "vreg_bob";
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
};
|
||||
|
||||
vreg_s8c_1p3: smps8 {
|
||||
regulator-name = "vreg_s8c_1p3";
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l1c_1p8: ldo1 {
|
||||
regulator-name = "vreg_l1c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2c_1p2: ldo2 {
|
||||
regulator-name = "vreg_l2c_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3c_0p92: ldo3 {
|
||||
regulator-name = "vreg_l3c_0p92";
|
||||
regulator-min-microvolt = <920000>;
|
||||
regulator-max-microvolt = <920000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l4c_1p7: ldo4 {
|
||||
regulator-name = "vreg_l4c_1p7";
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5c_1p8: ldo5 {
|
||||
regulator-name = "vreg_l5c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6c_2p9: ldo6 {
|
||||
regulator-name = "vreg_l6c_2p9";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7c_cam_vcm0_2p85: ldo7 {
|
||||
regulator-name = "vreg_l7c_cam_vcm0_2p85";
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8c_1p8: ldo8 {
|
||||
regulator-name = "vreg_l8c_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9c_2p9: ldo9 {
|
||||
regulator-name = "vreg_l9c_2p9";
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p0: ldo10 {
|
||||
regulator-name = "vreg_l10c_3p0";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-name = "vreg_l11c_3p3";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8009-rpmh-regulators {
|
||||
compatible = "qcom,pm8009-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vreg_bob>;
|
||||
vdd-l2-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l5-l6-supply = <&vreg_bob>;
|
||||
vdd-l7-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_l1f_cam_dvdd1_1p1: ldo1 {
|
||||
regulator-name = "vreg_l1f_cam_dvdd1_1p1";
|
||||
regulator-min-microvolt = <1104000>;
|
||||
regulator-max-microvolt = <1104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l2f_cam_dvdd0_1p2: ldo2 {
|
||||
regulator-name = "vreg_l2f_cam_dvdd0_1p2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3f_cam_dvdd2_1p05: ldo3 {
|
||||
regulator-name = "vreg_l3f_cam_dvdd2_1p05";
|
||||
regulator-min-microvolt = <1056000>;
|
||||
regulator-max-microvolt = <1056000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5f_cam_avdd0_2p85: ldo5 {
|
||||
regulator-name = "vreg_l5f_cam_avdd0_2p85";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6f_cam_avdd1_2p85: ldo6 {
|
||||
regulator-name = "vreg_l6f_cam_avdd1_2p85";
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <2856000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7f_1p8: ldo7 {
|
||||
regulator-name = "vreg_l7f_1p8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
|
|
@ -27,3 +358,23 @@ &qupv3_id_1 {
|
|||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
|
||||
vcc-supply = <&vreg_l17a_3p0>;
|
||||
vcc-max-microamp = <750000>;
|
||||
vccq-supply = <&vreg_l6a_1p2>;
|
||||
vccq-max-microamp = <700000>;
|
||||
vccq2-supply = <&vreg_s4a_1p8>;
|
||||
vccq2-max-microamp = <750000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l5a_0p875>;
|
||||
vdda-max-microamp = <90200>;
|
||||
vdda-pll-supply = <&vreg_l9a_1p2>;
|
||||
vdda-pll-max-microamp = <19000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -4,7 +4,9 @@
|
|||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
||||
|
||||
/ {
|
||||
|
|
@ -304,6 +306,76 @@ uart2: serial@a90000 {
|
|||
};
|
||||
};
|
||||
|
||||
ufs_mem_hc: ufs@1d84000 {
|
||||
compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
|
||||
"jedec,ufs-2.0";
|
||||
reg = <0 0x01d84000 0 0x3000>;
|
||||
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&ufs_mem_phy_lanes>;
|
||||
phy-names = "ufsphy";
|
||||
lanes-per-direction = <2>;
|
||||
#reset-cells = <1>;
|
||||
resets = <&gcc GCC_UFS_PHY_BCR>;
|
||||
reset-names = "rst";
|
||||
|
||||
power-domains = <&gcc UFS_PHY_GDSC>;
|
||||
|
||||
clock-names =
|
||||
"core_clk",
|
||||
"bus_aggr_clk",
|
||||
"iface_clk",
|
||||
"core_clk_unipro",
|
||||
"ref_clk",
|
||||
"tx_lane0_sync_clk",
|
||||
"rx_lane0_sync_clk",
|
||||
"rx_lane1_sync_clk";
|
||||
clocks =
|
||||
<&gcc GCC_UFS_PHY_AXI_CLK>,
|
||||
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
||||
<&gcc GCC_UFS_PHY_AHB_CLK>,
|
||||
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
|
||||
<&rpmhcc RPMH_CXO_CLK>,
|
||||
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
|
||||
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
|
||||
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
|
||||
freq-table-hz =
|
||||
<37500000 300000000>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<37500000 300000000>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<0 0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ufs_mem_phy: phy@1d87000 {
|
||||
compatible = "qcom,sm8250-qmp-ufs-phy";
|
||||
reg = <0 0x01d87000 0 0x1c0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
clock-names = "ref",
|
||||
"ref_aux";
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
||||
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
|
||||
|
||||
resets = <&ufs_mem_hc 0>;
|
||||
reset-names = "ufsphy";
|
||||
status = "disabled";
|
||||
|
||||
ufs_mem_phy_lanes: lanes@1d87400 {
|
||||
reg = <0 0x01d87400 0 0x108>,
|
||||
<0 0x01d87600 0 0x1e0>,
|
||||
<0 0x01d87c00 0 0x1dc>,
|
||||
<0 0x01d87800 0 0x108>,
|
||||
<0 0x01d87a00 0 0x1e0>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
intc: interrupt-controller@17a00000 {
|
||||
compatible = "arm,gic-v3";
|
||||
#interrupt-cells = <3>;
|
||||
|
|
@ -314,8 +386,8 @@ intc: interrupt-controller@17a00000 {
|
|||
};
|
||||
|
||||
pdc: interrupt-controller@b220000 {
|
||||
compatible = "qcom,sm8250-pdc";
|
||||
reg = <0x0b220000 0x30000>, <0x17c000f0 0x60>;
|
||||
compatible = "qcom,sm8250-pdc", "qcom,pdc";
|
||||
reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
|
||||
qcom,pdc-ranges = <0 480 94>, <94 609 31>,
|
||||
<125 63 1>, <126 716 12>;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
@ -362,6 +434,56 @@ rpmhcc: clock-controller {
|
|||
clock-names = "xo";
|
||||
clocks = <&xo_board>;
|
||||
};
|
||||
|
||||
rpmhpd: power-controller {
|
||||
compatible = "qcom,sm8250-rpmhpd";
|
||||
#power-domain-cells = <1>;
|
||||
operating-points-v2 = <&rpmhpd_opp_table>;
|
||||
|
||||
rpmhpd_opp_table: opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
rpmhpd_opp_ret: opp1 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_min_svs: opp2 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_low_svs: opp3 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_svs: opp4 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_svs_l1: opp5 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom: opp6 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom_l1: opp7 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom_l2: opp8 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_turbo: opp9 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_turbo_l1: opp10 {
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tcsr_mutex_regs: syscon@1f40000 {
|
||||
|
|
|
|||
Loading…
Reference in New Issue