mirror of https://gitee.com/openkylin/linux.git
1cb00f8c3b
For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl7DYUQbHGJqb3JuLmFu ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FWxgP/RgO73BTFzapqi2GO/lC Jsc/lE9gNpmkuM9kluPrYvDIdDjEgfAehajCmBgkk2nyJnmN0XWSyJWzrAHstaUd 6TKYww43mPtCjPH7mk18DCINTK0yVrrpdpbgy2FQm5/heCQFPsZFWtLPJ23t8wQn fBJV/JzHjzeaEKf97QPgdTILt/hPSob5PVSdVT+VDC9jp/vnVEAVlc6+58rsH5sZ eRsGeoA0hUuaKZb7vji8afzyQzjs8Qra+56yhP13eFOtR0Ww1UOvESLWHFzUI91T yx9qjEDqF4Rw44MWxAxRpwQUU06PiwcIO0Z4ziZ5/FCr+Tseo+yo21B59i+9p112 ihJsQNN18oxAAtyuzv+OxcD3+H7qODvxR0fCdeAWZajeP994P79I4Ddejs+V0KN2 SZmJQmn8Ba8zMPJA7EZAug1IFrNfJ/xOu6KAv6bXpUYc8a5vRyQNqKgBIokry3V+ SDDrHOxu3XhPGR6YmkorJ6EfWdOm1iPs/o5b2GkJZLww6Vd89tIbNsMIDlVCVWaO R0gImZcpJpO9CLmQvnfKmE9yozIoadCS6lkfaCKuGm+usi5uPFXJqE5AcJ+Yj3/4 fi+MksJOrVwKRpuxr2lMM4GpOVqo7yUZ1iCveNn/GAfw3OVtsef0zL4vk0o4gYvd Bg0AVo61nTwJ7ef/i8mdlLT8 =ds6R -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DT updates for v5.8 For SDM845 this defines the IPA network accelerator and the CCI camera control bus, it defines the required UFS reset and adds WiFi for the Lenovo Yoga C630 and defines GPIO pin names and adds OV8856 and OC7251 camera nodes for DB845c. For SC7180 it adds GPU support, defines the modem remoteproc, adds the IPA network accelerator, Coresight and ETM support, adds cpuidle low power states and updates the CPUs' compatible. For SM8250 it adds regulators from the PM8150, PM8150L and PM8009 and adds voltage corners, it defines the nodes for UFS PHY and controller and finally corrects a typo in the PDC node to make SPMI functional. For MSM8916 I2C1 and I2C5 are defined, a node for the CCI camera control interface bus is added and Coresight is disabled by default to match some product configurations. The Samsung A3U gained display support and Samsung A5U gained touchscreen support. MSM8996 now property describes the power supply chain for the GPU, the CCI camera control interface bus is added and the DB820c has the regulators of the secondary PMIC defined. For QCS404 USB PHYs and controllers are defined and wired up for the EVB. SDM630/SDM660 platform support is added and the Xiaomi Redmi Note 7 defined. It also contains a number of changes throughout to improve DT binding compliance. * tag 'qcom-arm64-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (68 commits) arm64: dts: qcom: sc7180: Correct the pdc interrupt ranges arm64: dts: qcom: sc7180: add IPA information arm64: dts: qcom: sc7180: Fix ETMv4 power management patch arm64: dts: qcom: sc7180: Add A618 gpu dt blob dt-bindings: arm-smmu: Add sc7180 compatible string arm64: dts: qcom: msm8996: Make GPU node control GPU_GX GDSC arm64: dts: qcom: db820c: Add vdd_gfx and tie it into mmcc arm64: dts: qcom: apq8016-sbc: merge -pins.dtsi into main .dtsi arm64: dts: qcom: msm8916: move gpu opp table to gpu node arm64: dts: qcom: msm8916: avoid using _ in node names arm64: dts: qcom: c630: Specify UFS device reset arm64: dts: qcom: c630: Add WiFi node arm64: dts: qcom: msm8916-samsung-a3u: add nodes for display panel arm64: dts: qcom: db820c: Fix invalid pm8994 supplies arm64: dts: qcom: db820c: Add pmi8994 RPM regulators arm64: dts: qcom: msm8916: Disable coresight by default arm64: dts: qcom: sc7180: Add "no-map" to cmd_db reserved area arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen regulator arm64: dts: qcom: msm8916: Add blsp_i2c5 ... Link: https://lore.kernel.org/r/20200519052528.1249950-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|---|---|---|
| Documentation | ||
| LICENSES | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
README
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.