Analysing a backtrace associated with the current EHCI runtime suspend code
has highlighted several places where its perfectly valid to make a
transition to GB_TIMESYNC_STATE_INACTIVE when not already in the
GB_TIMESYNC_STATE_INIT state, for example failure to issue a TimeSync
enable command to the SVC can and should legitimately call
gb_timesync_teardown() - at this point the state will be
GB_TIMESYNC_STATE_WAIT_SVC and it's legitimate and desirable to transition
to the INACTIVE state in this case. This patch fixes by removing the
restrictive and incorrect restriction on the transition to INACTIVE only
being valid when state == GB_TIMESYNC_STATE_INIT.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There is a scenario where gb_timesync_svc_remove() can run, attain a mutex
and call cancel_delayed_work_sync(). In the meantime a worker may already
be running and trying to attain the same mutex but will never do so as the
gb_timesync_svc_remove() path is holding the mutex and waiting on the
delayed_work_sync() to complete - leading to deadlock. This patch addresses
by calling the cancel_delayed_work_sync() before locking the relevant
mutex.
Reported-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add license and copyright header to the firmware.c test application.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We should be checking if any of the bundles contains a CPort with its id
set to the special value of '0', which is reserved for control CPort.
Discard the bundle in that case.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In gb_svc_input_create() fn, on failure, wrong pointer
was being passed to input_free_device(). Correct it.
svc->input gets initialized only on successful return of this fn,
so it is absolutely wrong to pass svc->input to input_free_device().
Testing Done: Tested on EVT2.0 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Creating the data connection at probe time makes it impossible to
support multiple inserted camera modules as they would all try to
establish a data connection to the same CPort on the AP side. Create and
destroy the data connection when configuring the streams instead, as a
single module can be streaming at a time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
When the module is in the configured state, an attempt to change the
configuration must first tear down the data connection to update its
parameters, as the APB1 bridge doesn't support modifying the CSI
transmitter configuration when it is already started.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
When the camera pipeline can't be configured due to a failure of one of
the components (failure to start the CSI transmitter for instance),
components that have already been setup for video streaming need to be
set back to a quiescient state. This is especially important to ensure
that a stream configuration failure won't keep the UniPro links in high
speed mode forever.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Tested-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_svc_del() can be called during removal of gb-es2.ko module as well,
and in that case we would like to properly shutdown all modules and
interfaces as USB is still alive.
This requires that we don't disable the svc connection, at least for tx,
as that will be used while removing modules and interfaces.
Disable only rx to begin with, as we shouldn't be handling any requests
from the SVC. Disable tx only after all the users of svc connection are
gone.
Tested on EVT 2.0 by remove gb-es2.ko module. There are still few
errors, specially while quiescing the connections (-22), but not that
many.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We are using the mutex from gb_camera_cleanup(), which can get called
even before the mutex is initialized.
Fix it by initializing the mutex early enough.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is used only to check if an existing connection already uses the
cport_id or not and doesn't really need to return pointer to the
connection.
While at it, also rename it to suit its purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We need to use 'do_div()' when doing 64 bit division or modulo division
since the kernel will not pull in the gcc builtins __aeabi_ldivmod and
__aeabi_uldivmod on 32 bit builds.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On the gb_uart_remove() path we are forgetting to do a release_minor()
leading to a minor number leak. This is a simple one-line fix.
Tested on EVT 2.0
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Earlier I have shared a patch to rate limit err messages in audio_codec
driver. However, missed to include suggestion from Mark to do similar
changes in audio bundle & topology parser as well. Doing it now.
Testing Done: Compile tested
Fixes: 4cb3d109e5fc ("audio: Ratelimit err messages")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
While reordering gb_deactivate sequence to avoid protocol error this was
mistakenly added even during shutdown_tx/rx. It is supposed to be done
immediately after stop_tx and only once.
Fixes: 739f25d5f490 ("audio: Reorder gb_deactivate sequence to avoid protocol error")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently trigger callback is used to start/stop greybus tx/rx
path. This works well for almost all scenario except few
specially handled usecases by Android Audio subsystem.
In case of Music playback followed by Incoming ringtone, above
layer tries to trigger_pause from one FE dailink and start a
fresh playback via different FE dailink. Since, same BE dailink
is used for both cases, an invalid state transition is requested
i.e. from PAUSE->START. This fails & thus causes ringtone playback
failure. With built-in codec, trigger callback is not required to
initiate data xfer unlike gb-codec driver.
This state transition should be handled in Android layer, but
since it can lead to multiple side effects for various usecase
we are trying to avoid trigger callback in gbcodec driver as well.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bring the gb_svc_intf_set_power_mode() up-to-date with the current Greybus
specification. This largely involves adding more members to the structure
sent across the wire. Also change the camera code to use the new
operation properly, with default values passed for the new necessary
arguments. The correctness of these default values is confirmed via testing
and by asking Rob Johnson.
We must make sure to zero the request structure sent across the wire, lest
bite us most cruelly, and we fix by changing the Set Power Mode
Response structure to use a __u8 rather than a __le16.
Testing Done: Took a picture with a camera module, received error code
when passing deliberately incorrect values for new parameters, got proper
-EIO and Greybus result code printed when operation stopped halfway
through. Could induce error by initializing request struct with random
nonsense, and can stop it by initializing request struct with zeroes.
Associated Firmware Changes: 1669-1671 on Android N Gerrit for SW-2945
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Some line breaks weren't required as we never crossed 80 columns, remove
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There is no point keeping this code in core.c, while its only used by
hd.c. Relocate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We should be using the PM hooks available within the 'struct
device_driver', instead of adding legacy suspend/resume callbacks.
Remove them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This routine always returns 0 or 1 and a return type of 'bool' suits it
the best. Update it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
User space doesn't break anymore with new greybus modules and its time
to make bootrom a separate module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The "busy" SVC result codes are gone from the spec. Delete them.
Testing Done: compile.
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
pwm_is_enabled() wasn't enabled by v4.2-rc1, but it was based of
v4.2-rc1. It was actually first included in v4.3.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add support for greybus debug data format.
Greybus debug data format id is 0x42.
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Acked-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Core disables all connections for bundles whose interface is already
gone in order to avoid unnecessary operation timeouts during driver
disconnect.
This isn't needed for offloaded connections (as the AP can not send
requests over such connections), and in fact must not be done since only
the bundle driver currently knows how to disable I/O on such connections
in a class-specific way (this may eventually be handled by core though).
Also add comment about why connection are disabled early on forced
disconnect.
Testing Done: Tested on EVT2.
Reported-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
I posted this once before but it got rejected for fear it would
not be clear which messages were related to Greybus.
Every trace event currently defined for Greybus is recorded in a
function whose name begins with "gb_". Every trace event reported
in /sys/kernel/debug/tracing/trace includes the name of the function
in which the event was recorded.
Get rid of the "greybus: " prefix in all of the Greybus trace
events. It just takes up precious space and is not actually
helpful. Anyone actually enabling individual trace events should
know enough about what they're doing to recognize which ones
are being enabled.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The symbol PWMF_ENABLED is defined via an enum, which is not defined
at the time the preprocessor passes through "kernel_ver.h". So we
can't use it in an #if statement expression.
Use the Linux kernel version instead.
Change-Id: Id427224b1dfecfd886fcdae89c4bcf711b616439
Signed-off-by: Alex Elder <elder@linaro.org>
AP should check for Greybus SVC Protocol Operation Status to determine if the
operation was successfully completed by the SVC
Testing Done:
- Successfully getting the rail names in the pwrmon_dummy sandbox branch
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In the 4.7-rc1 kernel release, PWMF_ENABLED is removed and
pwm_is_enabled() is the correct way to test if a pwm device is enabled,
so provide a version of that function that will work on all older
kernels and change the pwm.c driver to use it so that it will work on
newer kernels as well.
Tested:
Tree now builds successfully against 3.14.y, 4.4.y, 4.5.y,
4.6.y, and 4.7-rc2 kernels
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In case of audio mgmt connection failure, GB requests would fail giving
an error message within the driver and reporting error. However there is
no error handling in above HAL and it'll keep on triggering similar
request via GB codec driver. This may overflood serial console. In one
of the instance it locked CPU for >10sec and caused a watchdog bite.
Thus ratelimit those error messages.
Testing Done: compile tested
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch makes a debugfs entry in
/sys/kernel/debug/greybus/X-svc/frame-ktime that generates a TimeSync ping
event to the system and then subsequently presents that data to user-space
as a ktime/timespec clock-monotonic value rather than as a raw frame-time,
to aid humans in debugging and understanding frame-time and to provide an
example of the converting a frame-time to timespec/ktime to other
developers.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds gb_timesync_to_timespec_by_svc() and
gb_timesync_to_timespec_by_interface() respectively. These routines will
convert from a given FrameTime to a ktime/timespec within an envelope of
about 17 seconds. The purpose of this routine is to enable reporting of a
FrameTime from a Module such as a Camera Module and to allow the AP to
then convert this timestamp into a Linux-native timestamp such as ktime.
This is useful and required in the v4l layer.
At 19.2MHz the accuracy of this conversion is about .3 femtoseconds per
count, which means at a 1 second offset from the reference the cumulative
error is about 1.59 nanoseconds. 1.59 nanoseconds is still less than 1
clock's worth of error @ 19.2MHz where each clock is 52.0833~ nanoseconds.
We're aiming for a maximum error rate of 30 nanoseconds which means at the
clock rate we are running at, the conversion from a FrameTime to a Linux
ktime/timespec can be plus-or-minus about 17 seconds from the reference
FrameTime/ktime pair before the routine will refuse to convert.
A realistic use-case for this routine is envisaged to be
- Greybus message received
- Some processing takes place - taking milliseconds
- Call into this routine is made
- Actual time between event in Module and conversion in AP < 1 second
- Error rate in conversion at 1.59 nanoseconds is less than 1 clock
@ 19.2MHz
This routine is not designed to allow for conversions for events with
large gaps between the event time and the current reference time for
conversion. Since FrameTime can be a very large integer we cannot convert
an arbitrarily large FrameTime to ktime, the feeling and objective here is
to make an over-provisioned envelope that in practical terms can never be
exceeded by expected use-cases. To convert longer gaps more work would have
to be done but ultimately some limit needs to be imposed and right now 0.3
femotseconds per clock on MSM8994 is both accurate and generous.
Adds:
- timesync.c::gb_timesync_frame_time_to_timespec_by_svc(
struct gb_svc *,
u64 frame_time,
struct timespec *ts)
- gb_svc is a pointer to a standard greybus SVC data structure
- frame_time is a system FrameTime.
- ts is an output parameter which represents the converted FrameTime
as a CLOCK_MONOTONIC timespec value.
- Returns 0 on success or a negative number indicating the type of
error on failure.
- timesync.c::gb_timesync_frame_time_to_timespec_by_interface(
struct gb_interface *,
u64 frame_time,
struct timespec *ts)
- gb_svc is a pointer to a standard greybus Interface data structure
- frame_time is a system FrameTime.
- ts is an output parameter which represents the converted FrameTime
as a CLOCK_MONOTONIC timespec value.
- Returns 0 on success or a negative number indicating the type of
error on failure.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds a tracepoint to the TimeSync ISR, the purpose of which is
to indicate a TimeSync event has happened. This tracepoint can be enabled
by issuing the following command:
echo 1 > /sys/kernel/debug/tracing/events/greybus/gb_timesync_irq/enable
Synchronization looks like this:
TIMESTAMP FUNCTION
| |
147.865788: gb_timesync_irq: strobe 1/4 frame-time 2910076529
147.866781: gb_timesync_irq: strobe 2/4 frame-time 2910095689
147.867777: gb_timesync_irq: strobe 3/4 frame-time 2910114820
147.868791: gb_timesync_irq: strobe 4/4 frame-time 2910134038
A ping can be triggered like this:
cat /sys/kernel/debug/greybus/frame-time
And that ping looks like this:
TIMESTAMP FUNCTION
| |
147.934678: gb_timesync_irq: ping 4/4 frame-time 2911380356
169.280551: gb_timesync_irq: ping 4/4 frame-time 3321221069
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
TimeSync needs to bind into Greybus in a few places.
- core.c
To initialize its internal state and tear-down its internal state.
To schedule a timesync to a newly added Bundle after probe() completes.
- svc.c
To get access to the SVC and enable/disable timesync as well as
extracting the authoritative time from the SVC to subsequently
disseminate to other entities in the system.
- interface.c
To get access to an Interface in order to inform APBx of timesync
enable/disable and authoritative operations.
This patch adds those bindings into Greybus core.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the core timesync functionality.
0. arche-platform.c/arche-apb-ctrl.c
Modifies the platform layer to hook the incoming TIME_SYNC signal up to
the timesync strobe IRQ handler. If the arche-platform driver can't
satisfy the request for the wake-detect line, it will return -EAGAIN and
the calling work-queue must reschedule the attempt to get exclusive
access to the wake-detect pin logic. A private data field is added to
the arche-platform driver to enable passing of a timesync pointer to the
ISR responsible for synchronizing time.
1. timesync.c
A new file added which contains all of the logic associated with sending
greybus commands to SVC, APBx or Interfaces to enable, disable and
disseminate timing information.
2. timesync_platform.c
Any platform/arch specific code goes into timesync_platform.c.
Originally the idea was to keep the x86 and ARM arch dependencies in a
timesync_platform_arch.c file - however with further refinement that's
currently not necessary however just-in-case it becomes necessary to
resuscitate arch or platform specific methods for accessing timer
resources that access shouldn't be part of the core timesync.c logic and
so for the moment we access these timer resources through a thin access
layer in timesync_platform.c. Expect this to go away long term ideally.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reporting DISCONNECT event immediately on module removal causes
race condition while re-populating mixer controls by above HAL. The
original intent was to avoid any (invalid) mixer control modification
request from above layer.
Ideally, it should report 'MODULE_NOT_READY' on module plug-out and
DISCONNECT after resource cleanup. This would involve changes in GB
Audio manager and HAL layer.
Since we already have a plan to remove GB Audio manager, I'm making this
change in GB codec driver to avoid any race condition. Also, codec
driver already ensures mixer control modifcations for disconnected
modules are not triggered to AP Bridge audio FW & reported invalid.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Added warning message in find_gb_module(). This will help to identify
invalid mixer control/widget modification triggered from above layer.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The original message trace events were defined long before the
recent tracing updates. It records information that's not
really directly related to a message. Change the information
recorded and reported for message events to just be the content
of the message header.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan reports he used certain message traces to determine when time
sync messages transit the boundary between the Greybus core and the
host device. This patch adds two trace events--one a message event
for outbound messages (because it indicates its operation and its
destination), and one host device event for incoming messages
(because message information isn't available as early as desired).
These events are being created to allow the same sort of analysis
of messages without having to store extra information for every
message trace. (The next patch changes the information a message
trace records.)
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Define a new gb_connection trace point event class, used to trace
events associated with the connection abstraction. Define four basic
trace events for this--creation, drop of last reference, and when
adding or dropping any other reference. There are certainly
more events that we might want to add, but aim is to just get the
basic framework in place.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Define a new gb_bundle trace point event class, used to trace events
associated with the bundle abstraction. Define four basic trace
points for this--creation time, drop of last reference, before
adding it to its interface and when removed when its interface
is destroyed.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add the value of an interface's mode_switch field to the information
tracked and reported for tracing.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Most abstractions to be traced will have a sort of "parent" object
it is associated with, and an identifier for that parent is stored
with the as trace event data. For example, the parent of a message
is the operation it's a part of, and the parent of an operation is
the connection it uses.
We'll arrange to define that parent id first in all events. Most
abstractions already do this. Move an interface's module id so it's
defined and assigned first. The message traces are going to be
changed soon, so leave that one alone.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
A module's num_interfaces field is included in the data to be
recorded for tracing, but it's never assigned or reported. Fix
its type to be size_t, to match its definition in the gb_module
structure.
Also correct a format length modifier used for a host device's
num_cports field.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move the definition of the module trace events below those for the
interface. We'll define them in an order that represents a sort of
layering of the abstractions (note not all of these are defined yet):
message
operation
connection
bundle
interface
module
host device
Other tracepoints (like perhaps some tied to timesync) will go at the
beginning or end.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Bryan O'Donoghue