Converting a frame number to an address is tricky since the data type changes
size. Introduce a function to do it. This fixes an actual bug when
accessing guest ptes.
Signed-off-by: Avi Kivity <avi@qumranet.com>
If all we're doing is increasing permissions on a pte (typical for demand
paging), then there's not need to flush remote tlbs. Worst case they'll
get a spurious page fault.
Signed-off-by: Avi Kivity <avi@qumranet.com>
I spent an hour worrying why I see so many guest page faults on FC6 i386.
Turns out bypass wasn't implemented for nonpae. Implement it so it doesn't
happen again.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Split kvm_arch_vcpu_create() into kvm_arch_vcpu_create() and
kvm_arch_vcpu_setup(), enabling preemption notification between the two.
This mean that we can now do vcpu_load() within kvm_arch_vcpu_setup().
Signed-off-by: Avi Kivity <avi@qumranet.com>
Moving !user_alloc case to kvm_arch to avoid unnecessary
code logic in non-x86 platform.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of incrementally changing the mmu cache size for every memory slot
operation, recalculate it from scratch. This is simpler and safer.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of fetching one byte at a time, prefetch 15 bytes (or until the next
page boundary) to avoid guest page table walks.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Theoretically used to acccess memory known to be ordinary RAM, it was
never implemented. It is questionable whether it is possible to implement
it correctly.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Improve dirty bit setting for pages that kvm release, until now every page
that we released we marked dirty, from now only pages that have potential
to get dirty we mark dirty.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
When we map a page, we check whether some other vcpu mapped it for us and if
so, bail out. But we should decrease the refcount on the page as we do so.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Use kvm_write_guest_page() with empty_zero_page, instead of doing
kmap and memset.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Ensure that segment.base == segment.selector << 4 when entering the real
mode on Intel so that the CPU will not bark at us. This fixes some old
protected mode demo from http://www.x86.org/articles/pmbasics/tspec_a1_doc.htm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move out kvm_mmu init and exit functionality from kvm_main.c
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Meanwhile keep the interface in common, and leave as more logic in common
as possible.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of having each architecture do it individually, we
do this in the arch-independent code (just x86 as of now).
[avi: add svm to the mix, which was added to mainline during the
2.6.24-rc process]
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This is a little more accurate (since it counts actual reloads, not potential
reloads), and reverses the sense of the statistic to measure a bad event like
most of the other stats (e.g. we want to minimize all counters).
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add two arch hooks to handle kvm_create_vm and kvm destroy_vm. Now, just
put io_bus init and destory in common.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move kvm_vcpu_ioctl_translate to arch, since mmu would be put under arch.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
We pass vcpu, vmx->fail, and vmx->launched to assembly code, but all three
are fields within vmx. Consolidate by only passing in vmx and offsets for
the rest.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Make KVM_CHECK_EXTENSION code into a function, all archs can define its
capability independently.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current 'lods' and 'stos' is depending on incoming CR2 rather than decode
memory address from registers.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Will be called once arch module registers itself.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move some includes to x86.c from kvm_main.c, since the related functions
have been moved to x86.c
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This changes kvm_write_guest_page/kvm_read_guest_page to use
copy_to_user/read_from_user, as a result we get better speed
and better dirty bit tracking.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Convert a guest frame number to the corresponding host virtual address.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Check for the "error hva", an address outside the user address space that
signals a bad gfn.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add wbinvd VM Exit support to prepare for pass-through
device cache emulation and also enhance real time
responsiveness.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
If vmx fails to inject a real-mode interrupt while fetching the interrupt
redirection table, it fails to record this in the vectoring information
field. So we detect this condition and do it ourselves.
Signed-off-by: Avi Kivity <avi@qumranet.com>
We'll want to write to it in order to fix real-mode irq injection problems,
but it is a read-only field. Storing it in a variable solves that issue.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of injecting real-mode interrupts by writing the interrupt frame into
guest memory, abuse vmx by injecting a software interrupt. We need to
pretend the software interrupt instruction had a length > 0, so we have to
adjust rip backward.
This lets us not to mess with writing guest memory, which is complex and also
sleeps.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Every write access to guest pages should be tracked.
Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instructions like 'inc reg' that have the register operand encoded
in the opcode are currently specially decoded. Extend
decode_register_operand() to handle that case, indicated by having
DstReg or SrcReg without ModRM.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves implementation of the following functions from
kvm_main.c to x86.c:
free_pio_guest_pages, vcpu_find_pio_dev, pio_copy_data, complete_pio,
kernel_pio, pio_string_write, kvm_emulate_pio, kvm_emulate_pio_string
The function inject_gp, which was duplicated by yesterday's patch
series, is removed from kvm_main.c now because it is not needed anymore.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves the following functions to from kvm_main.c to x86.c:
emulator_read/write_std, vcpu_find_pervcpu_dev, vcpu_find_mmio_dev,
emulator_read/write_emulated, emulator_write_phys,
emulator_write_emulated_onepage, emulator_cmpxchg_emulated,
get_setment_base, emulate_invlpg, emulate_clts, emulator_get/set_dr,
kvm_report_emulation_failure, emulate_instruction
The following data type is moved to x86.c:
struct x86_emulate_ops emulate_ops
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves the implementation of the functions of kvm_get/set_msr,
kvm_get/set_msr_common, and set_efer from kvm_main.c to x86.c. The
definition of EFER_RESERVED_BITS is moved too.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM's nopage handler calls gfn_to_page() which acquires the mmap_sem when
calling out to get_user_pages(). nopage handlers are already invoked with the
mmap_sem held though. Introduce a __gfn_to_page() for use by the nopage
handler which requires the lock to already be held.
This was noticed by tglx.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch based on CR8/TPR patch, and enable the TPR shadow (FlexPriority)
for 32bit Windows. Since TPR is accessed very frequently by 32bit
Windows, especially SMP guest, with FlexPriority enabled, we saw significant
performance gain.
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves the definitions of CR0_RESERVED_BITS,
CR4_RESERVED_BITS, and CR8_RESERVED_BITS along with the following
functions from kvm_main.c to x86.c:
set_cr0(), set_cr3(), set_cr4(), set_cr8(), get_cr8(), lmsw(),
load_pdptrs()
The static function wrapper inject_gp is duplicated in kvm_main.c and
x86.c for now, the version in kvm_main.c should disappear once the last
user of it is gone too.
The function load_pdptrs is no longer static, and now defined in x86.h
for the time being, until the last user of it is gone from kvm_main.c.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves the implementation of get_apic_base and set_apic_base
from kvm_main.c to x86.c
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves the definition of segment_descriptor_64 for AMD64 and
EM64T from kvm_main.c to segment_descriptor.h. It also adds a proper
#ifndef...#define...#endif around that header file.
The implementation of segment_base is moved from kvm_main.c to x86.c.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch splits kvm_vm_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
The patch is unchanged since last submission.
Common ioctls for all architectures are:
KVM_CREATE_VCPU, KVM_GET_DIRTY_LOG, KVM_SET_USER_MEMORY_REGION
x86 specific ioctls are:
KVM_SET_MEMORY_REGION,
KVM_GET/SET_NR_MMU_PAGES, KVM_SET_MEMORY_ALIAS, KVM_CREATE_IRQCHIP,
KVM_CREATE_IRQ_LINE, KVM_GET/SET_IRQCHIP
KVM_SET_TSS_ADDR
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Emulation may cause a shadow pte to be instantiated, which requires
memory resources. Make sure the caches are filled to avoid an oops.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The code that dispatches the page fault and emulates if we failed to map
is duplicated across vmx and svm. Merge it to simplify further bugfixing.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The 'mov abs' instruction family (opcodes 0xa0 - 0xa3) still depends on cr2
provided by the page fault handler. This is wrong for several reasons:
- if an instruction accessed misaligned data that crosses a page boundary,
and if the fault happened on the second page, cr2 will point at the
second page, not the data itself.
- if we're emulating in real mode, or due to a FlexPriority exit, there
is no cr2 generated.
So, this change adds decoding for this instruction form and drops reliance
on cr2.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD i386
* Original code saves following registers:
ebx, ecx, edx, esi, edi, ebp
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
ebx, ecx, edx, esi, edi
- rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
description.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD x86_64.
* Original code saves following registers:
rbx, rcx, rdx, rsi, rdi, rbp,
r8, r9, r10, r11, r12, r13, r14, r15
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
rbx, rcx, rdx, rsi, rdi
r8, r9, r10, r11, r12, r13, r14, r15
- rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
description.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel i386.
* Original code saves following registers:
eax, ebx, ecx, edx, edi, esi, ebp (using popa)
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
ebx, edi, rsi
- doesn't save eax because it is an output operand (vmx->fail)
- cannot put ecx in clobber description because it is an input operand,
but as we modify it and we want to keep its value (vcpu), we must
save it (pop/push)
- ebp is saved (pop/push) because GCC seems to ignore its use the clobber
description.
- edx is saved (pop/push) because it is reserved by GCC (REGPARM) and
cannot be put in the clobber description.
- line "mov (%%esp), %3 \n\t" has been removed because %3
is ecx and ecx is restored just after.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel x86_64.
* Original code saves following registers:
rax, rbx, rcx, rdx, rsi, rdi, rbp,
r8, r9, r10, r11, r12, r13, r14, r15
* Patched code:
- informs GCC that we modify following registers
using the clobber description:
rbx, rdi, rsi,
r8, r9, r10, r11, r12, r13, r14, r15
- doesn't save rax because it is an output operand (vmx->fail)
- cannot put rcx in clobber description because it is an input operand,
but as we modify it and we want to keep its value (vcpu), we must
save it (pop/push)
- rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
description.
- rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and
cannot be put in the clobber description.
- line "mov (%%rsp), %3 \n\t" has been removed because %3
is rcx and rcx is restored just after.
- line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel. This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Reserve a few memory slots for kernel internal use. This is good for case
you have to register memory region and you want to be sure it was not
registered from userspace, and for case you want to register a memory region
that won't be seen from userspace.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Remove kvm memory slot allocation mechanism from the ioctl
and put it to exported function.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
kvm_vm_ioctl_set_memory_region() is able to remove memory in addition to
adding it. Therefore when using kernel swapping support for old userspaces,
we need to munmap the memory if the user request to remove it
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Split guest reset code out of vmx_vcpu_setup(). Besides being cleaner, this
moves the realmode tss setup (which can sleep) outside vmx_vcpu_setup()
(which is executed with preemption enabled).
[izik: remove unused variable]
Signed-off-by: Avi Kivity <avi@qumranet.com>
First step to split kvm_vcpu. Currently, we just use an macro to define
the common fields in kvm_vcpu for all archs, and all archs need to define
its own kvm_vcpu struct.
Signed-off-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Allocate a userspace buffer for older userspaces. Also eliminate phys_mem
buffer. The memset() in kvmctl really kills initial memory usage but swapping
works even with old userspaces.
A side effect is that maximum guest side is reduced for older userspace on
i386.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
ppc and s390 offer the possibility to track process times precisely
by looking at cpu timer on every context switch, irq, softirq etc.
We can use that infrastructure as well for guest time accounting.
We need to account the used time before we change the state.
This patch adds a call to account_system_vtime to kvm_guest_enter
and kvm_guest exit. If CONFIG_VIRT_CPU_ACCOUNTING is not set,
account_system_vtime is defined in hardirq.h as an empty function,
which means this patch does not change the behaviour on other
platforms.
I compile tested this patch on x86 and function tested the patch on
s390.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This allows guest memory to be swapped. Pages which are currently mapped
via shadow page tables are pinned into memory, but all other pages can
be freely swapped.
The patch makes gfn_to_page() elevate the page's reference count, and
introduces kvm_release_page() that pairs with it.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
In case the page is not present in the guest memory map, return a dummy
page the guest can scribble on.
This simplifies error checking in its users.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current kvm mmu only reverse maps writable translation. This is used
to write-protect a page in case it becomes a pagetable.
But with swapping support, we need a reverse mapping of read-only pages as
well: when we evict a page, we need to remove any mapping to it, whether
writable or not.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instruction: cmc, clc, cli, sti
opcodes: 0xf5, 0xf8, 0xfa, 0xfb respectively.
[avi: fix reference to EFLG_IF which is not defined anywhere]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Simplify the walker level loop not to carry so much information from one
loop to the next. In addition to being complex, this made kmap_atomic()
critical sections difficult to manage.
As a result of this change, kmap_atomic() sections are limited to actually
touching the guest pte, which allows the other functions called from the
walker to do sleepy operations. This will happen when we enable swapping.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Beside the obvious goodness of making code more common, this prevents
a livelock with the next patch which moves interrupt injection out of the
critical section.
Signed-off-by: Avi Kivity <avi@qumranet.com>
If no apic is enabled in the bitmap of an interrupt delivery with delivery
mode of lowest priority, a warning should be reported rather than select
a fallback vcpu
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Eddie (Yaozu) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch splits kvm_vcpu_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
Common ioctls for all architectures are:
KVM_RUN, KVM_GET/SET_(S-)REGS, KVM_TRANSLATE, KVM_INTERRUPT,
KVM_DEBUG_GUEST, KVM_SET_SIGNAL_MASK, KVM_GET/SET_FPU
Note that some PPC chips don't have an FPU, so we might need an #ifdef
around KVM_GET/SET_FPU one day.
x86 specific ioctls are:
KVM_GET/SET_LAPIC, KVM_SET_CPUID, KVM_GET/SET_MSRS
An interresting aspect is vcpu_load/vcpu_put. We now have a common
vcpu_load/put which does the preemption stuff, and an architecture
specific kvm_arch_vcpu_load/put. In the x86 case, this one calls the
vmx/svm function defined in kvm_x86_ops.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Since the mmu uses different shadow pages for dirty large pages and clean
large pages, this allows the mmu to drop ptes that are now invalid.
Signed-off-by: Avi Kivity <avi@qumranet.com>
By forcing clean huge pages to be read-only, we have separate roles
for the shadow of a clean large page and the shadow of a dirty large
page. This is necessary because different ptes will be instantiated
for the two cases, even for read faults.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This is more consistent with the accessed bit management, and makes the dirty
bit available earlier for other purposes.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This time, the biggest change is gpa_to_hpa. The translation of GPA to HPA does
not depend on the VCPU state unlike GVA to GPA so there's no need to pass in
the kvm_vcpu.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Some of the MMU functions take a struct kvm_vcpu even though they affect all
VCPUs. This patch cleans up some of them to instead take a struct kvm. This
makes things a bit more clear.
The main thing that was confusing me was whether certain functions need to be
called on all VCPUs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of having the kernel allocate memory to the guest, let userspace
allocate it and pass the address to the kernel.
This is required for s390 support, but also enables features like memory
sharing and using hugetlbfs backed memory.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Since vcpu->apic is of the correct type, there's not need to cast.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move kvm_create_lapic() into kvm_vcpu_init(), rather than having svm
and vmx do it. And make it return the error rather than a fairly
random -ENOMEM.
This also solves the problem that neither svm.c nor vmx.c actually
handles the error path properly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Instead of the asymetry of kvm_free_apic, implement kvm_free_lapic().
And guess what? I found a minor bug: we don't need to hrtimer_cancel()
from kvm_main.c, because we do that in kvm_free_apic().
Also:
1) kvm_vcpu_uninit should be the reverse order from kvm_vcpu_init.
2) Don't set apic->regs_page to zero before freeing apic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The user is now able to set how many mmu pages will be allocated to the guest.
Signed-off-by: Izik Eidus <izike@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
When kvm uses user-allocated pages in the future for the guest, we won't
be able to use page->private for rmap, since page->rmap is reserved for
the filesystem. So we move the rmap base pointers to the memory slot.
A side effect of this is that we need to store the gfn of each gpte in
the shadow pages, since the memory slot is addressed by gfn, instead of
hfn like struct page.
Signed-off-by: Izik Eidus <izik@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Now that smp_call_function_single() knows how to call a function on the
current cpu, there's no need to check explicitly.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch modifies the management of REX prefix according behavior
I saw in Xen 3.1. In Xen, this modification has been introduced by
Jan Beulich.
http://lists.xensource.com/archives/html/xen-changelog/2007-01/msg00081.html
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The only valid case is on protected page access, other cases are errors.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Remove no_wb, use dst.type = OP_NONE instead, idea stollen from xen-3.1
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Remove _eflags and use directly ctxt->eflags. Caching eflags is not needed as
it is restored to vcpu by kvm_main.c:emulate_instruction() from ctxt->eflags
only if emulation doesn't fail.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
To improve readability, move push, writeback, and grp 1a/2/3/4/5/9 emulation
parts into functions.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch removes the fault injected when the guest attempts to set reserved
bits in cr3. X86 hardware doesn't generate a fault when setting reserved bits.
The result of this patch is that vmware-server, running within a kvm guest,
boots and runs memtest from an iso.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
When we allow guest page faults to reach the guests directly, we lose
the fault tracking which allows us to detect demand paging. So we provide
an alternate mechnism by clearing the accessed bit when we set a pte, and
checking it later to see if the guest actually used it.
Signed-off-by: Avi Kivity <avi@qumranet.com>
There are two classes of page faults trapped by kvm:
- host page faults, where the fault is needed to allow kvm to install
the shadow pte or update the guest accessed and dirty bits
- guest page faults, where the guest has faulted and kvm simply injects
the fault back into the guest to handle
The second class, guest page faults, is pure overhead. We can eliminate
some of it on vmx using the following evil trick:
- when we set up a shadow page table entry, if the corresponding guest pte
is not present, set up the shadow pte as not present
- if the guest pte _is_ present, mark the shadow pte as present but also
set one of the reserved bits in the shadow pte
- tell the vmx hardware not to trap faults which have the present bit clear
With this, normal page-not-present faults go directly to the guest,
bypassing kvm entirely.
Unfortunately, this trick only works on Intel hardware, as AMD lacks a
way to discriminate among page faults based on error code. It is also
a little risky since it uses reserved bits which might become unreserved
in the future, so a module parameter is provided to disable it.
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM avoids reloading the efer msr when the difference between the guest
and host values consist of the long mode bits (which are switched by
hardware) and the NX bit (which is emulated by the KVM MMU).
This patch also allows KVM to ignore SCE (syscall enable) when the guest
is running in 32-bit mode. This is because the syscall instruction is
not available in 32-bit mode on Intel processors, so the SCE bit is
effectively meaningless.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move emulate_ctxt to kvm_vcpu to keep emulate context when we exit from kvm
module. Call x86_decode_insn() only when needed. Modify x86_emulate_insn() to
not modify the context if it must be re-entered.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
emulate_instruction() calls now x86_decode_insn() and x86_emulate_insn().
x86_emulate_insn() is x86_emulate_memop() without the decoding part.
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Split the decoding process into a new function x86_decode_insn().
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move all x86_emulate_memop() common variables between decode and execute to a
structure decode_cache. This will help in later separating decode and
emulate.
struct decode_cache {
u8 twobyte;
u8 b;
u8 lock_prefix;
u8 rep_prefix;
u8 op_bytes;
u8 ad_bytes;
struct operand src;
struct operand dst;
unsigned long *override_base;
unsigned int d;
unsigned long regs[NR_VCPU_REGS];
unsigned long eip;
/* modrm */
u8 modrm;
u8 modrm_mod;
u8 modrm_reg;
u8 modrm_rm;
u8 use_modrm_ea;
unsigned long modrm_ea;
unsigned long modrm_val;
};
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch refactors the current hypercall infrastructure to better
support live migration and SMP. It eliminates the hypercall page by
trapping the UD exception that would occur if you used the wrong hypercall
instruction for the underlying architecture and replacing it with the right
one lazily.
A fall-out of this patch is that the unhandled hypercalls no longer trap to
userspace. There is very little reason though to use a hypercall to
communicate with userspace as PIO or MMIO can be used. There is no code
in tree that uses userspace hypercalls.
[avi: fix #ud injection on vmx]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add vmmcall/vmcall to x86_emulate. Future patch will implement functionality
for these instructions.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (890 commits)
x86: fix nodemap_size according to nodeid bits
x86: fix overlap between pagetable with bss section
x86: add PCI IDs to k8topology_64.c
x86: fix early_ioremap pagetable ops
x86: use the same pgd_list for PAE and 64-bit
x86: defer cr3 reload when doing pud_clear()
x86: early boot debugging via FireWire (ohci1394_dma=early)
x86: don't special-case pmd allocations as much
x86: shrink some ifdefs in fault.c
x86: ignore spurious faults
x86: remove nx_enabled from fault.c
x86: unify fault_32|64.c
x86: unify fault_32|64.c with ifdefs
x86: unify fault_32|64.c by ifdef'd function bodies
x86: arch/x86/mm/init_32.c printk fixes
x86: arch/x86/mm/init_32.c cleanup
x86: arch/x86/mm/init_64.c printk fixes
x86: unify ioremap
x86: fixes some bugs about EFI memory map handling
x86: use reboot_type on EFI 32
...
Both the old e1000 driver and the new e1000e driver can drive some
PCI-Express e1000 cards, and we should avoid ambiguity about which
driver will pick up the support for those cards when both drivers are
enabled.
This solves the problem by having the old driver support those cards if
the new driver isn't configured, but otherwise ceding support for PCI
Express versions of the e1000 chipset to the newer driver. Thus
allowing both legacy configurations where only the old driver is active
(and handles all chips it knows about) and the new configuration with
the new driver handling the more modern PCIE variants.
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.
If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.
With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.
In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.
An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.
A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt
It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff
Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Avi Kivity