This was already on my TODO list, and was requested both by Chris and
Ville, for different reasons. The advantages are avoiding a frequent
malloc/free pair, and the locality of having the work structure
embedded in dev_priv. The maximum used memory is also smaller since
previously we could have multiple allocated intel_fbc_work structs at
the same time, and now we'll always have a single one - the one
embedded on dev_priv. Of course, we're now using a little more memory
on the cases where there's nothing scheduled.
The biggest challenge here is to keep everything synchronized the way
it was before.
Currently, when we try to activate FBC, we allocate a new
intel_fbc_work structure. Then later when we conclude we must delay
the FBC activation a little more, we allocate a new intel_fbc_work
struct, and then adjust dev_priv->fbc.fbc_work to point to the new
struct. So when the old work runs - at intel_fbc_work_fn() - it will
check that dev_priv->fbc.fbc_work points to something else, so it does
nothing. Everything is also protected by fbc.lock.
Just cancelling the old delayed work doesn't work because we might
just cancel it after the work function already started to run, but
while it is still waiting to grab fbc.lock. That's why we use the
"dev_priv->fbc.fbc_work == work" check described in the paragraph
above.
So now that we have a single work struct we have to introduce a new
way to synchronize everything. So we're making the work function a
normal work instead of a delayed work, and it will be responsible for
sleeping the appropriate amount of time itself. This way, after it
wakes up it can grab the lock, ask "were we delayed or cancelled?" and
then go back to sleep, enable FBC or give up.
v2:
- Spelling fixes.
- Rebase after changing the patch order.
- Fix ms/jiffies confusion.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
This moves the pre-gen4 check from update() to enable(). The HAS_DDI
in the original code is not needed since only gen 2/3 have the plane
swapping code.
v2: Rebase.
v3: Extract fbc_on_plane_a_only() (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
One of the problems with the current code is that it frees the CFB and
releases its drm_mm node as soon as we flip FBC's enable bit. This is
bad because after we disable FBC the hardware may still use the CFB
for the rest of the frame, so in theory we should only release the
drm_mm node one frame after we disable FBC. Otherwise, a stolen memory
allocation done right after an FBC disable may result in either
corrupted memory for the new owner of that memory region or corrupted
screen/underruns in case the new owner changes it while the hardware
is still reading it. This case is not exactly easy to reproduce since
we currently don't do a lot of stolen memory allocations, but I see
patches on the mailing list trying to expose stolen memory to user
space, so races will be possible.
I thought about three different approaches to solve this, and they all
have downsides.
The first approach would be to simply use multiple drm_mm nodes and
freeing the unused ones only after a frame has passed. The problem
with this approach is that since stolen memory is rather small,
there's a risk we just won't be able to allocate a new CFB from stolen
if the previous one was not freed yet. This could happen in case we
quickly disable FBC from pipe A and decide to enable it on pipe B, or
just if we change pipe A's fb stride while FBC is enabled.
The second approach would be similar to the first one, but maintaining
a single drm_mm node and keeping track of when it can be reused. This
would remove the disadvantage of not having enough space for two
nodes, but would create the new problem where we may not be able to
enable FBC at the point intel_fbc_update() is called, so we would have
to add more code to retry updating FBC after the time has passed. And
that can quickly get too complex since we can get invalidate, flush,
disable and other calls in the middle of the wait.
Both solutions above - and also the current code - have the problem
that we unnecessarily free+realloc FBC during invalidate+flush
operations even if the CFB size doesn't change.
The third option would be to move the allocation/deallocation to
enable/disable. This makes sure that the pipe is always disabled when
we allocate/deallocate the CFB, so there's no risk that the FBC
hardware may read or write to the memory right after it is freed from
drm_mm. The downside is that it is possible for user space to change
the buffer stride without triggering a disable/enable - only
deactivate/activate -, so we'll have to handle this case somehow - see
igt's kms_frontbuffer_tracking test, fbc-stridechange subtest. It
could be possible to implement a way to free+alloc the CFB during said
stride change, but it would involve a lot of book-keeping - exactly as
mentioned above - just for on case, so for now I'll keep it simple and
just deactivate FBC. Besides, we may not even need to disable FBC
since we do CFB over-allocation.
Note from Chris: "Starting a fullscreen client that covers a single
monitor in a multi-monitor setup will trigger a change in stride on
one of the CRTCs (the monitors will be flipped independently).". It
shouldn't be a huge problem if we lose FBC on multi-monitor setups
since these setups already have problems reaching deep PC states
anyway.
v2: Rebase after changing the patch order.
v3:
- Remove references to the stride change case being "uncommon" and
paste Chris' example.
- Rebase after a change in a previous patch.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
The goal is to call FBC enable/disable only once per modeset, while
activate/deactivate/update will be called multiple times.
The enable() function will be responsible for deciding if a CRTC will
have FBC on it and then it will "lock" FBC on this CRTC: it won't be
possible to change FBC's CRTC until disable(). With this, all checks
and resource acquisition that only need to be done once per modeset
can be moved from update() to enable(). And then the update(),
activate() and deactivate() code will also get simpler since they
won't need to worry about the CRTC being changed.
The disable() function will do the reverse operation of enable(). One
of its features is that it should only be called while the pipe is
already off. This guarantees that FBC is stopped and nothing is
using the CFB.
With this, the activate() and deactivate() functions just start and
temporarily stop FBC. They are the ones touching the hardware enable
bit, so HW state reflects dev_priv->crtc.active.
The last function remaining is update(). A lot of times I thought
about renaming update() to activate() or try_to_activate() since it's
called when we want to activate FBC. The thing is that update() may
not only decide to activate FBC, but also deactivate or keep it on the
same state, so I'll leave this name for now.
Moving code to enable() and disable() will also help in case we decide
to move FBC to pipe_config or something else later.
The current patch only puts the very basic code on enable() and
disable(). The next commits will take care of moving more stuff from
update() to the new functions.
v2:
- Rebase.
- Improve commit message (Chris).
v3: Rebase after changing the patch order.
v4: Rebase again after upstream changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
The long term goal is to have enable/disable as the higher level
functions and activate/deactivate as the lower level functions, just
like we do for PSR and for the CRTC. This way, we'll run enable and
disable once per modeset, while update, activate and deactivate will
be run many times. With this, we can move the checks and code that
need to run only once per modeset to enable(), making the code simpler
and possibly a little faster.
This patch is just the first step on the conversion: it starts by
converting the current low level functions from enable/disable to
activate/deactivate. This patch by itself has no benefits other than
making review and rebase easier. Please see the next patches for more
details on the conversion.
v2:
- Rebase.
- Improve commit message (Chris).
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
There's no need to reevaluate the status of every single crtc when a
single crtc changes its state.
With this, we're cutting the case where due to a change in pipe B,
intel_fbc_update() is called, then intel_fbc_find_crtc() concludes FBC
should be enabled on pipe A, then it completely rechecks the state of
pipe A only to conclude FBC should remain enabled on pipe A. If any
change on pipe A triggers a need to recompute whether FBC is valid on
pipe A, then at some point someone is going to call
intel_fbc_update(PIPE_A).
The addition of intel_fbc_deactivate() is necessary so we keep track
of the previously selected CRTC when we do invalidate/flush. We're
also going to continue the enable/disable/activate/deactivate concept
in the next patches.
v2: Rebase.
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
This thing where we need to get the crtc either from the work
structure or the fbc structure itself is confusing and unnecessary.
Set fbc.crtc right when scheduling the enable work so we can always
use it.
The problem is not what gets passed and how to retrieve it. The
problem is that when we're in the other parts of the code we always
have to keep in mind that if FBC is already enabled we have to get the
CRTC from place A, if FBC is scheduled we have to get the CRTC from
place B, and if it's disabled there's no CRTC. Having a single place
to retrieve the CRTC from allows us to treat the "is enabled" and "is
scheduled" cases as the same case, reducing the mistake surface. I
guess I should add this to the commit message.
Besides the immediate advantages, this is also going to make one of
the next commits much simpler. And even later, when we introduce
enable/disable + activate/deactivate, this will be even simpler as
we'll set the CRTC at enable time. So all the
activate/deactivate/update code can just look at the single CRTC
variable regardless of the current state.
v2: Improve commit message (Chris).
v3: Rebase after changing the patch order.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
In function find_compression_threshold() we try to over-allocate CFB
space in order to reduce reallocations and fragmentation, and we're
not considering that at the CFB size check. Consider it.
There is also a longer-term plan to kill
dev_priv->fbc.uncompressed_size, but this will come later.
v2: Use drm_mm_node_allocated() (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/
Choose between i2c bit banging and gmbus in a new higher level function,
and let the i2c core retry the first time we fall back to bit banging.
The i2c core imposes a timeout on -EAGAIN, but it defaults to 1 second,
and shouldn't be a problem for us.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448980166-23055-2-git-send-email-jani.nikula@intel.com
Unfortunatey there appear to quite a few HSW/BDW machines (eg.
NUCs, Brix Pro) in the wild with LPT/WPT-H that have no physical
CRT connector and non-working FDI. FDI training fails every
single time on these machines. Dunno, maybe they just didn't
bother wiring it up or something?
Unfortunately all the fuse bits and whatnot are telling us that
the CRT connector is present. And so what we get from this is tons
of false positives from the CI systems due to VGA connector forcing.
I've not found any way to detect this purely from hardware, so we
have to resort to looking at the VBT int_crt_support bit. We used
to check this bit on all platforms, but that broke all the old
machines, so the check was then restricted to VLV only in
commit 84b4e042c4 ("drm/i915: only apply crt_present check on VLV")
Considering HSW and VLV VBT probably got defined around the same time,
it should be reasonably safe to assume that the bits is sane for
HSW/BDW as well. At least I have one copy of some VBT spec here that
says it's meant for both VLV and HSW, and it knows about the bit
(lists it being valid from version 155 onwards). Also I have two
desktop machines with actual CRT ports and both have
int_crt_support==1 in their VBTs.
Also we already trust VBT >= 155 to tell us various details about
the DDI ports, so trusting it a bit more seems reasonable.
As far as VLV goes, the added VBT version check should be fine. Even
if someone has some weird VLV machine with a very old VBT version,
it just means they'll end up with a shadow CRT connector. IIRC the
reason for eliminating the shadow CRT connector on VLV was to speed
up display probing rather than fixing something more serious.
v2: Move the platform checks into the VBT parsing code
Also check that the VBT version is at least 155
v3: Improve commit message (Paulo)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449005493-15487-1-git-send-email-ville.syrjala@linux.intel.com
On HSW/BDW DDI A and E share 2 lanes, so when DDI A requires the
shared lanes DDI E can't be used. The lanes are not supposed to
be dynamically switched between the two uses, so there's no point
in registering the CRT connector when DDI E has no lanes.
v2: Fix typos in the commit message (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449005396-15319-1-git-send-email-ville.syrjala@linux.intel.com
LPT-H has a strap bit for fused off CRT block. Check it to see if
we should register the CRT connector or not. Supposedly this also
forces the ADAP enable bit to 0, so the detection we added in
commit 6c03a6bd0d ("drm/i915: Don't register CRT connector when it's fused off")
should already catch it, but checking the fuse bit should at least
do no harm.
v2: Use HAS_PCH_LPT_H() (Paulo)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449005335-15192-1-git-send-email-ville.syrjala@linux.intel.com
Currently we round the AUX clock divider down on g4x, to closest
on HSW/BDW port A, and up everywhere else. We are supposed to get
as close to 2MHz as we can, so round to closest seems like the
best option.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Somehow we accumulated a duplicated .get_display_clock_speed()
assignment for PNV in
commit 34edce2fea ("drm/i915: Add cdclk extraction for g33, g965gm and g4x")
No real harm on having two, we just never reach the second one, so
simply kill it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448893432-6978-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Per bspec, "Backlight PWM may stop in the asserted state, causing
backlight to stay fully on. WA: Before disabling PWM, set CLKGATE_DIS_0
0x46530 bit 13 PWM1 Gating Dis (for PWM1) or bit 14 PWM2 Gating Dis (for
PWM2). The bits can remain set without harm." (There's no workaround
name for this.)
This fixes some Broxton backlight issues.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Jani: cleanup & commit message]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-3-git-send-email-jani.nikula@intel.com
If the backlight modulation frequency can't be extracted from the
registers or from VBT, use 200 Hz as the default. This may enable
backlight on some machines that previously failed.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-2-git-send-email-jani.nikula@intel.com
The only missing piece is the function to convert frequency to PWM
register value. The PWM is based on 19.2 MHz clock, except for BXT A
step, which is based on CDCLK, and which we ignore.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448958232-26520-1-git-send-email-jani.nikula@intel.com
BXT power well support is not yet stable. Starting with patch
commit 9f836f9016
Author: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Date: Mon Nov 16 16:20:01 2015 +0100
drm/i915/gen9: Turn DC handling into a power well
DPMS off operations may actually cause the entire system to powerdown or
reboot. Disable power well support for now until Broxton gets fixes
similar to what we have for SKL.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
References: http://lists.freedesktop.org/archives/intel-gfx/2015-November/081037.html
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448990818-11005-1-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The .get_config() hooks should not reference anything in crtc->config,
everything should be based on the passed in pipe_config instead. So
don't dig out the cpu_transcoder from crtc->config on ddi platfforms,
and also avoid using the encoder->crtc link and instead look up the
pipe via pipe_config->base.crtc.
I don't think this will actually fix anything since during the initial
state readout we set up the encoder->crtc link prior to calling
.get_config(), and during the modeset state check the encoder->crtc
ought to be correct anyway since it's that state we just programmed.
But this seems the right thing to do anyway.
While at it, do some house cleaning on the local variables in the
.infoframe_enabled() hooks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448555227-31403-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Similar to
commit 37ca8d4ccd
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Oct 30 19:20:27 2015 +0200
drm/i915: Enable PCH FIFO underruns later on ILK/SNB/IVB
we can only enable fifo underrun reporting when using the fdi/lpt
after everything is set up and after a bit of waiting. The waiting
is required, enabling it right after enabling encoders will first trigger
an underrun on the pch and then, 1 frame later, an underrun on the
cpu. Two vblank waits after encoder enabling seems enough to curb it.
And similar to
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Nov 20 22:09:18 2015 +0200
drm/i915: Suppress spurious CPU FIFO underruns on ILK-IVB
we also need to make sure cpu fifo underrun reporting is disabled when
enabling the fdi rx/tx and pch transcoder&port. But somehow this is
only needed when enabling, not also when disabling.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448705139-12534-1-git-send-email-daniel.vetter@ffwll.ch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91578
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DSI has quite a few special cases, like DP, so add it to crtc
state. This way we can get rid of a number of intel_pipe_has_type()
checks for DSI. This isn't necessarily the prettiest way, but it's a
step towards being aligned with what's being done with other encoders.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-3-git-send-email-jani.nikula@intel.com
The hook was added to cater for DSI, but with the hooks rearranged on
the DSI encoder side, this is no longer needed. It was a bit silly
anyway to have two hooks called back-to-back.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-2-git-send-email-jani.nikula@intel.com
For DSI, the pre_pll_enable and the pre_enable hooks are called
back-to-back on all platforms that support DSI. The distinction is
artificial for DSI, for which we enable the DSI PLL in the encoder
hooks. Do everything in pre_enable, and remove DSI pre_pll_enable hook.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448619706-21293-1-git-send-email-jani.nikula@intel.com
Found by static code analysis tool.
v2: Inserted block instead of goto & renamed variables (Chris)
v3: Aligned code as per the opening brace (Chris)
Rebased on top of nightly (Daniel)
Signed-off-by: Namrta Salonie <namrta.salonie@intel.com>
Signed-off-by: Deepak S <deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
ironlake_{enable,disable}_display_irq() each just call
ilk_update_display_irq() so let's make them static inlines.
While at it s/ironlake/ilk/ to make things shorter, and a bit more
consistent with the ibx functions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448294777-13722-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This reverts
commit 97e5ed1111
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Oct 23 10:56:12 2015 +0200
drm/i915: shut up gen8+ SDE irq dmesg noise
With the proper fix ("drm/i915: fix the SDE irq dmesg warnings
properly") reliably in place, bring back the error message.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448462843-32739-2-git-send-email-jani.nikula@intel.com
We had the "The master control interrupt lied (SDE)!" check and error
message in place for a long time without any problems, until
commit aaf5ec2e51
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Wed Jul 8 17:07:47 2015 +0530
drm/i915: Handle HPD when it has actually occurred
caused the errors to start happening. This was bisected and reported,
but the error message was silenced in
commit 97e5ed1111
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Oct 23 10:56:12 2015 +0200
drm/i915: shut up gen8+ SDE irq dmesg noise
shooting the messenger while the debugging for why Sonika's commit
triggered the errors was still in progress.
It looks like we need to read and acknowledge the PCH_PORT_HOTPLUG
register even though the hotplug trigger indicates there isn't a hotplug
irq to handle. The PCH doesn't seem to really ack the the interrupt to
the CPU unless we touch the hotplug register.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92084
Fixes: aaf5ec2e51 ("drm/i915: Handle HPD when it has actually occurred")
[Jani: added a comment and amended the commit message while applying]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448462843-32739-1-git-send-email-jani.nikula@intel.com
Commit "30c964a drm/i915: Detect virtual south bridge" detects and
handles the southbridge emulated by vmware esx. Add the ich9 south
bridge emulated by 'qemu -M q35'.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit b04c5bd6fd
Author: Borun Fu <borun.fu@intel.com>
Date: Sat Jul 12 10:02:27 2014 +0530
drm/i915: Power gating display wells during i915_pm_suspend
moved for_each_power_domain from intel_display.c to i915_drv.h but we
still have the definition around in intel_display.c, due to a merge
conflict resolution gone wrong in
commit 4dac3edfe6
Merge: 487777673ee05444be70
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Jul 29 20:49:36 2014 +0200
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next
Just remove the extra definition left behind.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448383645-7615-1-git-send-email-jani.nikula@intel.com
On some machines the CRT connector may be fused off. The weird thing
about this setup is that the ADPA register works otherwise normally,
except the enable bit is hardwired to 0. No one knows of any fuse
register that would tell us if this is the case, so the only thing we
can do (apart from a blacklist) is to try and set the enable bit and see
if it sticks. If not, we don't register the connector at all. Obviously
if the bit is already set when loading the driver we can just assume it
works.
I've smoke tested this approach on several machines (GMCH and PCH),
some with actual CRT connectors, some with shadow connectors, and
obviously the machine (IVB) with the fused off connector. So far
I've not seen any ill effects from this probe.
The main benefit is that we can actually run igt on machines with
fused off connectors, without totally upsetting the state checker.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448051741-22771-1-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
To get a better idea if underruns occurred during crtc disabling,
let's check for them explicitly. This helps in cases where the
error interrupt isn't active, or there is no underrun interrupt
support at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448050160-14124-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We sometimes get a spurious CPU pipe underrun somewhere between
enabling port A and enabling vdd for the panel. Observed on both
ILK and IVB with port A eDP. Suppress FIFO underrun reporting
around the port and vdd enable to avoid the dmesg errors.
Not sure if port D eDP would suffer from the same issue, but assume
that it doesn't until proven differently.
Testcase: igt/kms_setmode
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448050160-14124-2-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
We still get spurious pipe underruns on ILK/SNB/IVB under two
circumstances when dealing with PCH ports:
* When the pipe has been disabled, but FDI RX/TX is still enabled
* During FDI link training
Both cases seem to happen at least when we do VGA+HDMI cloning
from the same pipe. I don't think I've seen them when not cloning,
but can't be 100% sure.
Disable underrun reporting around those places to eliminate the
dmesg errors.
Testcase: igt/kms_setmode/basic-clone-single-crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448050160-14124-1-git-send-email-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
It is not a bad idea to disable the PSR feature on Sink
when we are disabling on the Source.
v2: Move dpcd write inside mutex protected area as suggested by Sonika.
Cc: Sonika Jindal <sonika.jindal@intel.com>
Suggested-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Whenever DMC firmware put the HW into DC State a bunch
of registers including this perf counter is reset to 0.
Even with PSR active and working we could still read
"Performance_Counter: 0" what will misslead people to believe
PSR is broken. For instance on SKL we can only see PC10
residency with screen on if PSR is working properly.
However Performance_Counter was showing 0.
Even if it restored properly on DC6 exit we don't want to
give users the wrong impression that PSR is not working
while we know for sure it is.
So, it is better to remove this counter information while
we don't have a better way to track PSR residency.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we introduced PSR we let LPSP masked allowing us to get PSR
independently from the audio runtime PM. However in one of the
attempts to get PSR enabled by default one user reported one specific
case where he would miss screen updates if scrolling the firefox in a
Gnome environment when i915 runtime pm was enabled. So for
this specific case that (I could never create an i-g-t test case)
we decided to remove the LPSP mask and let HW tracking taking care of
this case. The mask got removed later by my
commit 09108b90f0 ("drm/i915: PSR: Remove Low Power HW tracking mask.")
So we started depending on audio driver again, what is bad.
With previous commit
"drm/i915: PSR: Let's rely more on frontbuffer tracking."
we transfered the PSR exit responsability totally to SW frontbuffer
tracking. So now can safelly shut off a bit the HW tracking, or
at least this case that makes us to depend on other drivers.
v2: Update commit message since this patch by itself doesn't solve
the bugzilla entries.
v3: Another attempt to improve commit message.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau damien.lespiau@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ultimate goal here is to remove the dependency we
currently have on audio driver power to get PSR working.
Since with audio driver runtime PM disabled the Hardware tracking
believes graphics is fully active and prevent PSR Entry, or
in other words continuously exit PSR.
So, the idea is to transfer the PSR exit responsability
from the HW tracking to the SW tracking (frontbuffer tracking),
who is really mature right now.
However with LPSP masked out there might be cases where we could
miss exit from HW tracking since it can be relying on this,
like a specific case reported at our mailing list who
user reported he would miss screen updates if scrolling firefox
in a Gnome environment when i915 runtimepm was enabled.
So before masking out LPSP again to make us independent from
the audio driver we need to make sure that all our cases
are coverred from the frontbuffer tracking perspective,
where the flush means invalidate and flush.
Without this patch for HSW, BDW and SKL we just do the
invalidate part when the flush wasn't originated by a page flip
because we were trusting the HW tracking for the flip case.
So let's rely more on frontbuffer tracking and do the
invalidation regardless the origin as expected for all platforms.
v2: Improve commit message as suggested by Paulo.
v3: Another attempt to let commit message more clear.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau damien.lespiau@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit (89251b17) intended to remove this line and let only one
DP_PSR_EN_CFG set, but it was wrong and this call is now duplicated
at the code.
Also "& ~DP_PSR_MAIN_LINK_ACTIVE" doesn't do anything at all. It
was like that since I introduced this call but probably the idea
was to be informative and make clear statement that we were not using
the link standby. So it is better to remove this one here and let
the code a bit cleaner.
v2: Improve commit message as requested by Paulo.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau damien.lespiau@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit e9f24d5fb7
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Mon Oct 5 13:26:36 2015 +0100
drm/i915: Clean up associated VMAs on context destruction
Added a warning based on an incorrect assumption that all VMAs
in a VM will be on the inactive list at the point last reference
to a context and VM is dropped.
This is not true because i915_gem_object_retire__read will not
put VMA on the inactive list until all activities on the object
in question (in all VMs) have been retired.
As a consequence, whether or not a context/VM will be destroyed
with its VMAs still on the active list, can depend on completely
unrelated activities using the same object from a different
context or engine.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92638
Testcase: igt/gem_request_retire/retire-vma-not-inactive
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448025816-25584-1-git-send-email-tvrtko.ursulin@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If we experience a refcounting failure in a power domain/well (unref'ing at
least one too many times), log the name of the offending domain or well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448034934-11926-2-git-send-email-daniels@collabora.com
Paulo Zanoni