This this the counterpart of 8aa7b526dc ("openvswitch: handle DNAT
tuple collision") for act_ct. From that commit changelog:
"""
With multiple DNAT rules it's possible that after destination
translation the resulting tuples collide.
...
Netfilter handles this case by allocating a null binding for SNAT at
egress by default. Perform the same operation in openvswitch for DNAT
if no explicit SNAT is requested by the user and allocate a null binding
for SNAT for packets in the "original" direction.
"""
Fixes: 95219afbb9 ("act_ct: support asymmetric conntrack")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cited commit started returning errors when notification info is not
filled by the bridge driver, resulting in the following regression:
# ip link add name br1 type bridge vlan_filtering 1
# bridge vlan add dev br1 vid 555 self pvid untagged
RTNETLINK answers: Invalid argument
As long as the bridge driver does not fill notification info for the
bridge device itself, an empty notification should not be considered as
an error. This is explained in commit 59ccaaaa49 ("bridge: dont send
notification when skb->len == 0 in rtnl_bridge_notify").
Fix by removing the error and add a comment to avoid future bugs.
Fixes: a8db57c1d2 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix more fallout from RTNL locking changes
* fixes for some of the bugs found by syzbot
* drop multicast fragments in mac80211 to align
with the spec and what drivers are doing now
* fix NULL-ptr deref in radiotap injection
-----BEGIN PGP SIGNATURE-----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=evzy
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes berg says:
====================
A fair number of fixes:
* fix more fallout from RTNL locking changes
* fixes for some of the bugs found by syzbot
* drop multicast fragments in mac80211 to align
with the spec and what drivers are doing now
* fix NULL-ptr deref in radiotap injection
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kaustubh reported and diagnosed a panic in udp_lib_lookup().
The root cause is udp_abort() racing with close(). Both
racing functions acquire the socket lock, but udp{v6}_destroy_sock()
release it before performing destructive actions.
We can't easily extend the socket lock scope to avoid the race,
instead use the SOCK_DEAD flag to prevent udp_abort from doing
any action when the critical race happens.
Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>
Fixes: 5d77dca828 ("net: diag: support SOCK_DESTROY for UDP sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both functions are known to be racy when reading inet_num
as we do not want to grab locks for the common case the socket
has been bound already. The race is resolved in inet_autobind()
by reading again inet_num under the socket lock.
syzbot reported:
BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port
write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0:
udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308
udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89
inet_autobind net/ipv4/af_inet.c:183 [inline]
inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807
inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1:
inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806
inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg net/socket.c:674 [inline]
____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
___sys_sendmsg net/socket.c:2404 [inline]
__sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
__do_sys_sendmmsg net/socket.c:2519 [inline]
__se_sys_sendmmsg net/socket.c:2516 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000 -> 0x9db4
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several ethtool functions leave heap uncleared (potentially) by
drivers. This will leave the unused portion of heap unchanged and
might copy the full contents back to userspace.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reconfiguration fails, we shut down everything, but we
cannot call cfg80211_shutdown_all_interfaces() with the wiphy
mutex held. Since cfg80211 now calls it on resume errors, we
only need to do likewise for where we call reconfig (whether
directly or indirectly), but not under the wiphy lock.
Cc: stable@vger.kernel.org
Fixes: 2fe8ef1062 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When I moved around the code here, I neglected that we could still
call register_netdev() or similar without the wiphy mutex held,
which then calls cfg80211_register_wdev() - that's also done from
cfg80211_register_netdevice(), but the phy80211 symlink creation
was only there. Now, the symlink isn't needed for a *pure* wdev,
but a netdev not registered via cfg80211_register_wdev() should
still have the symlink, so move the creation to the right place.
Cc: stable@vger.kernel.org
Fixes: 2fe8ef1062 ("cfg80211: change netdev registration/unregistration semantics")
Link: https://lore.kernel.org/r/20210608113226.a5dc4c1e488c.Ia42fe663cefe47b0883af78c98f284c5555bbe5d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.
Tested on Lantiq xRX200 (BT Home Hub 5A).
Fixes: 9423361da5 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.
The following bugs are fixed in the code:
1. Add support for non-LLQ machines:
The ena_xdp_tx_map_frame() function assumed that LLQ is
supported, and never mapped the whole packet using DMA. On some
instances, which don't support LLQ, this causes loss of traffic.
2. Wrong DMA buffer length passed to device:
When using LLQ, the first 'tx_max_header_size' bytes of the
packet would be copied to push header. The rest of the packet
would be copied to a DMA'd buffer.
3. Freeing the XDP buffer twice in case of a mapping error:
In case a buffer DMA mapping fails, the function uses
xdp_return_frame_rx_napi() to free the RX buffer and returns from
the function with an error. XDP frames that fail to xmit get
freed by the kernel and so there is no need for this call.
Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.
Fixes: eb4733d7cf ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported memory leak in rds. The problem
was in unputted refcount in case of error.
int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size,
int msg_flags)
{
...
if (!rds_next_incoming(rs, &inc)) {
...
}
After this "if" inc refcount incremented and
if (rds_cmsg_recv(inc, msg, rs)) {
ret = -EFAULT;
goto out;
}
...
out:
return ret;
}
in case of rds_cmsg_recv() fail the refcount won't be
decremented. And it's easy to see from ftrace log, that
rds_inc_addref() don't have rds_inc_put() pair in
rds_recvmsg() after rds_cmsg_recv()
1) | rds_recvmsg() {
1) 3.721 us | rds_inc_addref();
1) 3.853 us | rds_message_inc_copy_to_user();
1) + 10.395 us | rds_cmsg_recv();
1) + 34.260 us | }
Fixes: bdbe6fbc6a ("RDS: recv.c")
Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Avoid WARN_ON timing related checks, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEE1ilQI7G+y+fdhnrfoSvjmEKSnqEFAmC/jIAWHHN3QHNpbW9u
d3VuZGVybGljaC5kZQAKCRChK+OYQpKeoUH2EADQsRykhV9yWmfQv5rksqbDmZ/v
t9HiY8VT0rZjGFt59o2I870KIJ1F7yZ9yEAbHqdLo08AvuRHxYhqpgIckstsHGSG
iKnXH8ZA774rExCfT79VHifAtoFu+rnxuC1m5iSbrdoE5eOg+8R4uK22mPGh4eO9
k0+RNJi8AQn0c744+ssQRvk7MbUy5g2csqcDgoT6b3Op7b8bsAR3mCrNAacnwLnS
KxvQDAR1u9PBr+waMF+ZIvn2+Mh5dfs2DMPySfuj37KNg8bdWuJdJBGY4fiqGx19
Rr/uo1N2BDo85tp5MWKenGDwipK70uqjaNKPx/81WZIlw2hfuDzqkxTQ/QRj7rlu
qe7D6ymMoyTVmUz+/HR1FVpMAq4iY8/kQrTQIz6W2VTeTfjt3jnBtwMBH2C/IZLW
UOCZ+jvWtepxYPSP4Wel8PAt+mcuiYias6v85MM67S6ZN2C0qwvOKmcX8dt0acGB
k1nKVLyhyPESD/PgSmGW+s15eszjzsA+XIjCvVIUu4+wnTd14SdpgUJNJhIhw1xF
rqSMNx8wm9yVZ8D8+hJP8o0hLZn78YTdvJx7ctfK4xL4cJBXjDXxK4quZH8BvclI
QDQmosGaUw/add0PNISmMYFG7olClf0RW8L7RQpByK0osyx2gK/KJV3UJNzAXH8m
jnWDML4WizDRg5PJlw==
=eTBp
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20210608' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Avoid WARN_ON timing related checks, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
My initial goal was to fix the default MTU, which is set to 65536, ie above
the maximum defined in the driver: 65535 (ETH_MAX_MTU).
In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to
IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default.
Let's also, for consistency, set the mtu in vrf_setup(). This function
calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config
is done in the same function.
Before the patch:
$ ip link add blue type vrf table 1234
$ ip link list blue
9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff
$ ip link set dev blue mtu 65535
$ ip link set dev blue mtu 65536
Error: mtu greater than device maximum.
Fixes: 5055376a3b ("net: vrf: Fix ping failed when vrf mtu is set to 0")
CC: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The preposition "for" should be changed to preposition "of".
Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When 'nla_parse_nested_deprecated' failed, it's no need to
BUG() here, return -EINVAL is ok.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.
To fix this, we need to do two things:
1) prevent changing iftype while AP_VLANs are up, we can't
easily fix this case since cfg80211 already calls us with
the wiphy mutex held, but change_interface() is relatively
rare in drivers anyway, so changing iftype isn't used much
(and userspace has to fall back to down/change/up anyway)
2) pull the dev_close() loop over VLANs out of the wiphy mutex
section in the normal stop case
Cc: stable@vger.kernel.org
Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8 ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8 (neighbor: Improve garbage collection)
Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit c47cc30499 ("net: kcm: fix memory leak in kcm_sendmsg")
I misunderstood the root case of the memory leak and came up with
completely broken fix.
So, simply revert this commit to avoid GPF reported by
syzbot.
Im so sorry for this situation.
Fixes: c47cc30499 ("net: kcm: fix memory leak in kcm_sendmsg")
Reported-by: syzbot+65badd5e74ec62cb67dc@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'mlxsw-fixes'
Ido Schimmel says:
====================
mlxsw: Thermal and qdisc fixes
Patches #1-#2 fix wrong validation of burst size in qdisc code and a
user triggerable WARN_ON().
Patch #3 fixes a regression in thermal monitoring of transceiver modules
and gearboxes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thermal polling delay argument for modules and gearboxes thermal zones
used to be initialized with zero value, while actual delay was used to
be set by mlxsw_thermal_set_mode() by thermal operation callback
set_mode(). After operations set_mode()/get_mode() have been removed by
cited commits, modules and gearboxes thermal zones always have polling
time set to zero and do not perform temperature monitoring.
Set non-zero "polling_delay" in thermal_zone_device_register() routine,
thus, the relevant thermal zones will perform thermal monitoring.
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes: 5d7bd8aa7c ("thermal: Simplify or eliminate unnecessary set_mode() methods")
Fixes: 1ee14820fd ("thermal: remove get_mode() operation of drivers")
Signed-off-by: Mykola Kostenok <c_mykolak@nvidia.com>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mlxsw Qdisc offload, find_class() is an operation that yields a qdisc
offload descriptor given a parental qdisc descriptor and a class handle. In
__mlxsw_sp_qdisc_ets_graft() however, a band number is passed to that
function instead of a handle. This can lead to a trigger of a WARN_ON
with the following splat:
WARNING: CPU: 3 PID: 808 at drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c:1356 __mlxsw_sp_qdisc_ets_graft+0x115/0x130 [mlxsw_spectrum]
[...]
Call Trace:
mlxsw_sp_setup_tc_prio+0xe3/0x100 [mlxsw_spectrum]
qdisc_offload_graft_helper+0x35/0xa0
prio_graft+0x176/0x290 [sch_prio]
qdisc_graft+0xb3/0x540
tc_modify_qdisc+0x56a/0x8a0
rtnetlink_rcv_msg+0x12c/0x370
netlink_rcv_skb+0x49/0xf0
netlink_unicast+0x1f6/0x2b0
netlink_sendmsg+0x1fb/0x410
____sys_sendmsg+0x1f3/0x220
___sys_sendmsg+0x70/0xb0
__sys_sendmsg+0x54/0xa0
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Since the parent handle is not passed with the offload information, compute
it from the band number and qdisc handle.
Fixes: 28052e618b04 ("mlxsw: spectrum_qdisc: Track children per qdisc")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A max-shaper is the HW component responsible for delaying egress traffic
above a configured transmission rate. Burst size is the amount of traffic
that is allowed to pass without accounting. The burst size value needs to
be such that it can be expressed as 2^BS * 512 bits, where BS lies in a
certain ASIC-dependent range. mlxsw enforces that this holds before
attempting to configure the shaper.
The assumption for Spectrum-3 was that the lower limit of BS would be 5,
like for Spectrum-1. But as of now, the limit is still 11. Therefore fix
the driver accordingly, so that incorrect values are rejected early with a
proper message.
Fixes: 23effa2479 ("mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.
Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.
Fix following hung_task_timeout_secs trace seen in these cases.
INFO: task tc:20807 blocked for more than 122 seconds.
Tainted: G S 5.13.0-rc3+ #122
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000
Call Trace:
__schedule+0x27b/0x6a0
schedule+0x37/0xa0
schedule_preempt_disabled+0x5/0x10
__mutex_lock.isra.14+0x2a0/0x4a0
? netlink_lookup+0x120/0x1a0
? rtnl_fill_ifinfo+0x10f0/0x10f0
__netlink_dump_start+0x70/0x250
rtnetlink_rcv_msg+0x28b/0x380
? rtnl_fill_ifinfo+0x10f0/0x10f0
? rtnl_calcit.isra.42+0x120/0x120
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x1a0/0x280
netlink_sendmsg+0x216/0x440
sock_sendmsg+0x56/0x60
__sys_sendto+0xe9/0x150
? handle_mm_fault+0x6d/0x1b0
? do_user_addr_fault+0x1c5/0x620
__x64_sys_sendto+0x1f/0x30
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7f73218321
RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321
RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003
RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6
R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0
Fixes: b1396c2bd6 ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit ae81feb733 ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.
Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.
The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.
Fixes: ae81feb733 ("sch_htb: fix null pointer dereference on a null new_q")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Suggested-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-04
This series contains updates to virtchnl header file and ice driver.
Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.
Haiyue handles error of rebuilding VF VSI during reset.
Paul fixes reporting of autoneg to use the PHY capabilities.
Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.
Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld says:
====================
wireguard fixes for 5.13-rc5
Here are bug fixes to WireGuard for 5.13-rc5:
1-2,6) These are small, trivial tweaks to our test harness.
3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so
much different with -O2 either.
4) We were accidentally calling synchronize_rcu instead of
synchronize_net while holding the rtnl_lock, resulting in some rather
large stalls that hit production machines.
5) Peer allocation was wasting literally hundreds of megabytes on real
world deployments, due to oddly sized large objects not fitting
nicely into a kmalloc slab.
7-9) We move from an insanely expensive O(n) algorithm to a fast O(1)
algorithm, and cleanup a massive memory leak in the process, in
which allowed ips churn would leave danging nodes hanging around
without cleanup until the interface was removed. The O(1) algorithm
eliminates packet stalls and high latency issues, in addition to
bringing operations that took as much as 10 minutes down to less
than a second.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.
In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.
The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.
We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.
This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.
The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers. We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.
Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.
While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With deployments having upwards of 600k peers now, this somewhat heavy
structure could benefit from more fine-grained allocations.
Specifically, instead of using a 2048-byte slab for a 1544-byte object,
we can now use 1544-byte objects directly, thus saving almost 25%
per-peer, or with 600k peers, that's a savings of 303 MiB. This also
makes wireguard's memory usage more transparent in tools like slabtop
and /proc/slabinfo.
Fixes: 8b5553ace8 ("wireguard: queueing: get rid of per-peer ring buffers")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many of the synchronization points are sometimes called under the rtnl
lock, which means we should use synchronize_net rather than
synchronize_rcu. Under the hood, this expands to using the expedited
flavor of function in the event that rtnl is held, in order to not stall
other concurrent changes.
This fixes some very, very long delays when removing multiple peers at
once, which would cause some operations to take several minutes.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On recent kernels, this config symbol is no longer used.
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently in the ice driver, the check whether to
allow a LLDP packet to egress the interface from the
PF_VSI is being based on the SKB's priority field.
It checks to see if the packets priority is equal to
TC_PRIO_CONTROL. Injected LLDP packets do not always
meet this condition.
SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL
(0x0003) and does not set the priority field. There will
be other injection methods (even ones used by end users)
that will not correctly configure the socket so that
SKB fields are correctly populated.
Then ethernet header has to have to correct value for
the protocol though.
Add a check to also allow packets whose ethhdr->h_proto
matches ETH_P_LLDP (0x88CC).
Fixes: 0c3a6101ff ("ice: Allow egress control packets from PF_VSI")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ethtool incorrectly reported supported and advertised auto-negotiation
settings for a backplane PHY image which did not support auto-negotiation.
This can occur when using media or PHY type for reporting ethtool
supported and advertised auto-negotiation settings.
Remove setting supported and advertised auto-negotiation settings based
on PHY type in ice_phy_type_to_ethtool(), and MAC type in
ice_get_link_ksettings().
Ethtool supported and advertised auto-negotiation settings should be
based on the PHY image using the AQ command get PHY capabilities with
media. Add setting supported and advertised auto-negotiation settings
based get PHY capabilities with media in ice_get_link_ksettings().
Fixes: 48cb27f2fd ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
VSI rebuild can be failed for LAN queue config, then the VF's VSI will
be NULL, the VF reset should be stopped with the VF entering into the
disable state.
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any
type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the
same time as VF_MBX_ARQLEN.
Fixes: 82ba01282c ("ice: clear VF ARQLEN register on reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 12bb018c53 ("ice: Refactor VF reset") caused a regression
that removes the ability for a VF to request a different amount of
queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to
either increase or decrease the number of queue pairs they are
allocated. Fix this by using the variable vf->num_req_qs when
determining the vf->num_vf_qs during VF VSI creation.
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
-----BEGIN PGP SIGNATURE-----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=X9Cg
-----END PGP SIGNATURE-----
Merge tag 'for-net-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
bluetooth pull request for net:
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
An update from ieee802154 for your *net* tree.
This time we have fixes for the ieee802154 netlink code, as well as a driver
fix. Zhen Lei, Wei Yongjun and Yang Li each had a patch to cleanup some return
code handling ensuring we actually get a real error code when things fails.
Dan Robertson fixed a potential null dereference in our netlink handling.
Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner