The flush_queue_delayed was introdued to hold queue if flush is
running for non-queueable flush drive by commit 3ac0cc4508
("hold queue if flush is running for non-queueable flush drive"),
but the non mq parts of the flush code had been removed by
commit 7e992f847a ("block: remove non mq parts from the flush code"),
as well as removing the usage of the flush_queue_delayed flag.
Thus remove the unused flush_queue_delayed flag.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch suppresses an uninteresting KMSAN complaint without affecting
performance of the null_blk driver if CONFIG_KMSAN is disabled.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since it is nontrivial that nth_page() does not have to be used for a
bio_vec, document this.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change makes it possible to pass 'const struct bio *' arguments to
these functions.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
part_inc_in_flight and part_dec_in_flight only have one caller each, and
those callers are purely for bio based drivers. Merge each function into
the only caller, and remove the superflous blk-mq checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
part_inc_in_flight and part_dec_in_flight are no-ops for blk-mq queues,
so remove the calls in purely blk-mq callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't bother to call part_in_flight / part_in_flight_rw on blk-mq
devices, just call the blk-mq versions directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_make_request currently needs to grab an q_usage_counter
reference when allocating a request. This is because the block layer
grabs one before calling blk_mq_make_request, but also releases it as
soon as blk_mq_make_request returns. Remove the blk_queue_exit call
after blk_mq_make_request returns, and instead let it consume the
reference. This works perfectly fine for the block layer caller, just
device mapper needs an extra reference as the old problem still
persists there. Open code blk_queue_enter_live in device mapper,
as there should be no other callers and this allows better documenting
why we do a non-try get.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need for two queue references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need for two queue references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the blk_queue_enter_live calls into the callers, where they can
successively be cleaned up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently informational messages within block trace do not have PID
information of the process reporting the message included. With BFQ it
is sometimes useful to have the information and there's no good reason
to omit the information from the trace. So just fill in pid information
when generating note message.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Blk-crypto delegates crypto operations to inline encryption hardware
when available. The separately configurable blk-crypto-fallback contains
a software fallback to the kernel crypto API - when enabled, blk-crypto
will use this fallback for en/decryption when inline encryption hardware
is not available.
This lets upper layers not have to worry about whether or not the
underlying device has support for inline encryption before deciding to
specify an encryption context for a bio. It also allows for testing
without actual inline encryption hardware - in particular, it makes it
possible to test the inline encryption code in ext4 and f2fs simply by
running xfstests with the inlinecrypt mount option, which in turn allows
for things like the regular upstream regression testing of ext4 to cover
the inline encryption code paths.
For more details, refer to Documentation/block/inline-encryption.rst.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Whenever a device supports blk-integrity, make the kernel pretend that
the device doesn't support inline encryption (essentially by setting the
keyslot manager in the request queue to NULL).
There's no hardware currently that supports both integrity and inline
encryption. However, it seems possible that there will be such hardware
in the near future (like the NVMe key per I/O support that might support
both inline encryption and PI).
But properly integrating both features is not trivial, and without
real hardware that implements both, it is difficult to tell if it will
be done correctly by the majority of hardware that support both.
So it seems best not to support both features together right now, and
to decide what to do at probe time.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We must have some way of letting a storage device driver know what
encryption context it should use for en/decrypting a request. However,
it's the upper layers (like the filesystem/fscrypt) that know about and
manages encryption contexts. As such, when the upper layer submits a bio
to the block layer, and this bio eventually reaches a device driver with
support for inline encryption, the device driver will need to have been
told the encryption context for that bio.
We want to communicate the encryption context from the upper layer to the
storage device along with the bio, when the bio is submitted to the block
layer. To do this, we add a struct bio_crypt_ctx to struct bio, which can
represent an encryption context (note that we can't use the bi_private
field in struct bio to do this because that field does not function to pass
information across layers in the storage stack). We also introduce various
functions to manipulate the bio_crypt_ctx and make the bio/request merging
logic aware of the bio_crypt_ctx.
We also make changes to blk-mq to make it handle bios with encryption
contexts. blk-mq can merge many bios into the same request. These bios need
to have contiguous data unit numbers (the necessary changes to blk-merge
are also made to ensure this) - as such, it suffices to keep the data unit
number of just the first bio, since that's all a storage driver needs to
infer the data unit number to use for each data block in each bio in a
request. blk-mq keeps track of the encryption context to be used for all
the bios in a request with the request's rq_crypt_ctx. When the first bio
is added to an empty request, blk-mq will program the encryption context
of that bio into the request_queue's keyslot manager, and store the
returned keyslot in the request's rq_crypt_ctx. All the functions to
operate on encryption contexts are in blk-crypto.c.
Upper layers only need to call bio_crypt_set_ctx with the encryption key,
algorithm and data_unit_num; they don't have to worry about getting a
keyslot for each encryption context, as blk-mq/blk-crypto handles that.
Blk-crypto also makes it possible for request-based layered devices like
dm-rq to make use of inline encryption hardware by cloning the
rq_crypt_ctx and programming a keyslot in the new request_queue when
necessary.
Note that any user of the block layer can submit bios with an
encryption context, such as filesystems, device-mapper targets, etc.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline Encryption hardware allows software to specify an encryption context
(an encryption key, crypto algorithm, data unit num, data unit size) along
with a data transfer request to a storage device, and the inline encryption
hardware will use that context to en/decrypt the data. The inline
encryption hardware is part of the storage device, and it conceptually sits
on the data path between system memory and the storage device.
Inline Encryption hardware implementations often function around the
concept of "keyslots". These implementations often have a limited number
of "keyslots", each of which can hold a key (we say that a key can be
"programmed" into a keyslot). Requests made to the storage device may have
a keyslot and a data unit number associated with them, and the inline
encryption hardware will en/decrypt the data in the requests using the key
programmed into that associated keyslot and the data unit number specified
with the request.
As keyslots are limited, and programming keys may be expensive in many
implementations, and multiple requests may use exactly the same encryption
contexts, we introduce a Keyslot Manager to efficiently manage keyslots.
We also introduce a blk_crypto_key, which will represent the key that's
programmed into keyslots managed by keyslot managers. The keyslot manager
also functions as the interface that upper layers will use to program keys
into inline encryption hardware. For more information on the Keyslot
Manager, refer to documentation found in block/keyslot-manager.c and
linux/keyslot-manager.h.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The blk-crypto framework adds support for inline encryption. There are
numerous changes throughout the storage stack. This patch documents the
main design choices in the block layer, the API presented to users of
the block layer (like fscrypt or layered devices) and the API presented
to drivers for adding support for inline encryption.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the QoS targets are met and nothing is being throttled, there's
no way to tell how saturated the underlying device is - it could be
almost entirely idle, at the cusp of saturation or anywhere inbetween.
Given that there's no information, it's best to keep vrate as-is in
this state. Before 7cd806a9a9 ("iocost: improve nr_lagging
handling"), this was the case - if the device isn't missing QoS
targets and nothing is being throttled, busy_level was reset to zero.
While fixing nr_lagging handling, 7cd806a9a9 ("iocost: improve
nr_lagging handling") broke this. Now, while the device is hitting
QoS targets and nothing is being throttled, vrate keeps getting
adjusted according to the existing busy_level.
This led to vrate keeping climing till it hits max when there's an IO
issuer with limited request concurrency if the vrate started low.
vrate starts getting adjusted upwards until the issuer can issue IOs
w/o being throttled. From then on, QoS targets keeps getting met and
nothing on the system needs throttling and vrate keeps getting
increased due to the existing busy_level.
This patch makes the following changes to the busy_level logic.
* Reset busy_level if nr_shortages is zero to avoid the above
scenario.
* Make non-zero nr_lagging block lowering nr_level but still clear
positive busy_level if there's clear non-saturation signal - QoS
targets are met and nr_shortages is non-zero. nr_lagging's role is
preventing adjusting vrate upwards while there are long-running
commands and it shouldn't keep busy_level positive while there's
clear non-saturation signal.
* Restructure code for clarity and add comments.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Newell <newella@fb.com>
Fixes: 7cd806a9a9 ("iocost: improve nr_lagging handling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_io_schedule() isn't called from performance sensitive code path, and
it is easier to maintain by exporting it as symbol.
Also blk_io_schedule() is only called by CONFIG_BLOCK code, so it is safe
to do this way. Meantime fixes build failure when CONFIG_BLOCK is off.
Cc: Christoph Hellwig <hch@infradead.org>
Fixes: e6249cdd46 ("block: add blk_io_schedule() for avoiding task hung in sync dio")
Reported-by: Satya Tangirala <satyat@google.com>
Tested-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Synchronous direct I/O to a sequential write only zone can be issued using
the new REQ_OP_ZONE_APPEND request operation. As dispatching multiple
BIOs can potentially result in reordering, we cannot support asynchronous
IO via this interface.
We also can only dispatch up to queue_max_zone_append_sectors() via the
new zone-append method and have to return a short write back to user-space
in case an IO larger than queue_max_zone_append_sectors() has been issued.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export bio_release_pages and bio_iov_iter_get_pages, so they can be used
from modular code.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support REQ_OP_ZONE_APPEND requests for null_blk devices with zoned
mode enabled. Use the internally tracked zone write pointer position
as the actual write position and return it using the command request
__sector field in the case of an mq device and using the command BIO
sector in the case of a BIO device.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) command
with a start LBA set to the target zone write pointer position.
In order to always know the write pointer position of a sequential write
zone, the write pointer of all zones is tracked using an array of 32bits
zone write pointer offset attached to the scsi disk structure. Each
entry of the array indicate a zone write pointer position relative to
the zone start sector. The write pointer offsets are maintained in sync
with the device as follows:
1) the write pointer offset of a zone is reset to 0 when a
REQ_OP_ZONE_RESET command completes.
2) the write pointer offset of a zone is set to the zone size when a
REQ_OP_ZONE_FINISH command completes.
3) the write pointer offset of a zone is incremented by the number of
512B sectors written when a write, write same or a zone append
command completes.
4) the write pointer offset of all zones is reset to 0 when a
REQ_OP_ZONE_RESET_ALL command completes.
Since the block layer does not write lock zones for zone append
commands, to ensure a sequential ordering of the regular write commands
used for the emulation, the target zone of a zone append command is
locked when the function sd_zbc_prepare_zone_append() is called from
sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained
(e.g. a zone append is in-flight or a regular write has already locked
the zone), the zone append command dispatching is delayed by returning
BLK_STS_ZONE_RESOURCE.
To avoid the need for write locking all zones for REQ_OP_ZONE_RESET_ALL
requests, use a spinlock to protect accesses and modifications of the
zone write pointer offsets. This spinlock is initialized from sd_probe()
using the new function sd_zbc_init().
Co-developed-by: Damien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor sanity checks for zoned commands from sd_zbc_setup_zone_mgmt_cmnd().
This will help with the introduction of an emulated ZONE_APPEND command.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modify the interface of blk_revalidate_disk_zones() to add an optional
driver callback function that a driver can use to extend processing
done during zone revalidation. The callback, if defined, is executed
with the device request queue frozen, after all zones have been
inspected.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce blk_req_zone_write_trylock(), which either grabs the write-lock
for a sequential zone or returns false, if the zone is already locked.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.
A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
is written with a single command.
Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().
Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g. because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.
Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename __bio_add_pc_page() to bio_add_hw_page() and explicitly pass in a
max_sectors argument.
This max_sectors argument can be used to specify constraints from the
hardware.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ jth: rebased and made public for blk-map.c ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_queue_zone_is_seq() and blk_queue_zone_no() have not been called with
CONFIG_BLK_DEV_ZONED disabled until now.
The introduction of REQ_OP_ZONE_APPEND will change this, so we need to
provide noop fallbacks for the !CONFIG_BLK_DEV_ZONED case.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sync dio could be big, or may take long time in discard or in case of
IO failure.
We have prevented task hung in submit_bio_wait() and blk_execute_rq(),
so apply the same trick for prevent task hung from happening in sync dio.
Add helper of blk_io_schedule() and use io_schedule_timeout() to prevent
task hung warning.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Salman Qazi <sqazi@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gendisk can't be gone when there is IO activity, so not hold
part0's refcount in IO path.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Put all fields accessed in IO path together at the beginning
of the struct, so that all can be fetched in single cacheline.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The seqcount of 'nr_sects_seq' is only needed in case of 32bit SMP,
so define it just for 32bit SMP.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Yufen Yu <yuyufen@huawei.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
delete_partition() clears the cached last_lookup partition. However the
.last_lookup cache may be overwritten by one IO path after it is cleared
from delete_partition(). Then another IO path may use the cached deleting
partition after hd_struct_free() is called, then use-after-free is triggered
on the cached partition.
Fixes the issue by the following approach:
1) always get the partition's refcount via hd_struct_try_get() before
setting .last_lookup
2) move clearing .last_lookup from delete_partition() to hd_struct_free()
which is the release handle of the partition's percpu-refcount, so that no
IO path can cache deleteing partition via .last_lookup.
It is one candidate approach of Yufen's patch[1] which adds overhead
in fast path by indirect lookup which may introduce one extra cacheline
in IO path. Also this patch relies on percpu-refcount's protection, and
it is easier to understand and verify.
[1] https://lore.kernel.org/linux-block/20200109013551.GB9655@ming.t460p/T/#t
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we increase hardware queue count, blk_mq_update_queue_map will
reset the mapping between cpu and hardware queue base on the hardware
queue count(set->nr_hw_queues). The mapping cannot be reset if it
encounters error in blk_mq_realloc_hw_ctxs, but the fallback flow will
continue using it, then blk_mq_map_swqueue will touch a invalid memory,
because the mapping points to a wrong hctx.
blktest block/030:
null_blk: module loaded
Increasing nr_hw_queues to 8 fails, fallback to 1
==================================================================
BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x2f2/0x830
Read of size 8 at addr 0000000000000128 by task nproc/8541
CPU: 5 PID: 8541 Comm: nproc Not tainted 5.7.0-rc4-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0xa5/0xe6
__kasan_report.cold+0x65/0xbb
kasan_report+0x45/0x60
check_memory_region+0x15e/0x1c0
__kasan_check_read+0x15/0x20
blk_mq_map_swqueue+0x2f2/0x830
__blk_mq_update_nr_hw_queues+0x3df/0x690
blk_mq_update_nr_hw_queues+0x32/0x50
nullb_device_submit_queues_store+0xde/0x160 [null_blk]
configfs_write_file+0x1c4/0x250 [configfs]
__vfs_write+0x4c/0x90
vfs_write+0x14b/0x2d0
ksys_write+0xdd/0x180
__x64_sys_write+0x47/0x50
do_syscall_64+0x6f/0x310
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Tested-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes: 1cd925d583 ("bdi: remove the name field in struct backing_dev_info")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The name is only printed for a not registered bdi in writeback. Use the
device name there as is more useful anyway for the unlike case that the
warning triggers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge the _node vs normal version and drop the superflous gfp_t argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out a new bdi_set_owner helper to set the owner, and move the policy
for creating the bdi name back into genhd.c, where it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bdi_register_va is only used by super.c, which can't be modular.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All external users of device_create_vargs are gone, so remove it and
open code it in the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename blk_mq_alloc_rq_maps to blk_mq_alloc_map_and_requests,
this function allocs both map and request, make function name align
with funtion.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rename __blk_mq_alloc_rq_map to __blk_mq_alloc_map_and_request,
actually it alloc both map and request, make function name
align with function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_realloc_tag_set_tags will update set->nr_hw_queues, so
save old set->nr_hw_queues before call this function.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>