Commit Graph

390 Commits

Author SHA1 Message Date
Naveen Krishna Chatradhi fafb37cfae iio: exyno-adc: use syscon for PMU register access
This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-iio@vger.kernel.org
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-11-05 15:30:09 +00:00
Ivan T. Ivanov ce0694841e iio: iadc: Qualcomm SPMI PMIC current ADC driver
The current ADC is peripheral of Qualcomm SPMI PMIC chips. It has
16 bits resolution and register space inside PMIC accessible across
SPMI bus.

The driver registers itself through IIO interface.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-25 21:03:22 +01:00
Fabio Estevam 8552befa30 iio: adc: vf610: Propagate the real error when platform_get_irq() fails
There is no need to pass a 'fake' return value when platform_get_irq() fails.

Propagate the real error instead.

While at it, only consider negative numbers returned by platform_get_irq()
as error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-22 20:28:11 +01:00
Wolfram Sang 770ca15c03 iio: adc: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:39 +02:00
Søren Andersen b12206e917 iio: adc: mcp320x. Add support for more ADCs
Signed-off-by: Soeren Andersen <san at rosetechnology.dk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-09 20:14:03 +01:00
Jacob Pan de89bd7f21 iio: adc: Add support for axp288 adc
Platform driver for X-Powers AXP288 ADC, which is a sub-device of the
customized AXP288 PMIC for Intel Baytrail-CR platforms. GPADC device
enumerates as one of the MFD cell devices. It uses IIO infrastructure
to communicate with userspace and consumer drivers.

Usages of ADC channels include battery charging and thermal sensors.

Based on initial work by:
Ramakrishna Pallala <ramakrishna.pallala@intel.com>

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-10-07 09:30:08 +01:00
Fabio Estevam ef0d545493 iio: adc: vf610: SIMPLE_DEV_PM_OPS can fit on a single line
No need to call the SIMPLE_DEV_PM_OPS() macro in several lines.

It can fit into the 80-column range.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:31:05 +01:00
Fabio Estevam 9da64c25ff iio: adc: vf610: Disable the regulator on error
If clk_prepare_enable() fails we should disable the regulator that was
previously enabled.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:30:26 +01:00
Fabio Estevam 2e3d6675dc iio: adc: vf610: Return the error code directly
There is no need to pass the error clock code to the variable 'ret'.

Just return the error directly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-10-04 12:28:02 +01:00
Greg Kroah-Hartman d84a2b0d6f Merge 3.17-rc6 into staging-next.
We want the fixes in there, and it resolves a merge issue with
drivers/iio/accel/bma180.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-22 07:30:03 -07:00
Heiko Stübner 4c21bbb475 iio: adc: rockchip_saradc: add support for rk3066-tsadc variant
Older Rockchip SoCs, at least the rk3066, used a slightly modified saradc
for temperature measurements. This so called tsadc does not contain any
active parts like temperature interrupts and only supports polling the
current temperature. The returned voltage can then be converted by a
suitable thermal driver to and actual temperature and used for thermal
handling.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-21 13:39:36 +01:00
Sanchayan Maity 774623ca41 iio:adc:vf610-adc: Add temperature sensor support
Vybrid ADC peripheral includes a temperature sensor
which is connected to channel number 26. This patch
adds support for the sensor. The raw value is read
and the temperature calculated in milli degree Celsius,
which is returned using IIO_CHAN_INFO_PROCESSED option.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-21 13:25:56 +01:00
Ludovic Desroches d4f51956ac iio: adc: at91: don't use the last converted data register
If touchscreen mode is enabled and a conversion is requested on another
channel, the result in the last converted data register can be a
touchscreen relative value. Starting a conversion involves to do a
conversion for all active channel. It starts with ADC channels and ends
with touchscreen channels. Then if ADC_LCD register is not read quickly,
its content may be a touchscreen conversion.
To remove this temporal constraint, the conversion value is taken from
the channel data register.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:20:12 +01:00
Subbaraya Sundeep Bhatta 1887e724e2 iio: adc: xilinx-xadc: assign auxiliary channels address correctly
This patch fixes incorrect logic for assigning address
to auxiliary channels of xilinx xadc.

Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-09-14 18:18:22 +01:00
Josh Wu 3068ab202e iio: adc: at91: make the function handle_adc_eoc_trigger() static
The handle_adc_eoc_trigger() in only used in at91_adc.c. So make it
static.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30 10:47:33 +01:00
Heiko Stübner dd8f17a120 iio: adc: rockchip_saradc: remove unused variable in probe
The rate variable in the probe function of the saradc is a remnant
of a previous patch iteration. It is unused and thus produces a
compile time warning. Therefore remove it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-30 10:45:14 +01:00
Sanjeev Sharma 81816affea iio: remove .owner field for driver using module_platform_driver
This patch removes the .owner field for drivers which use the
platform_driver_register api because this is overriden in
_platform_driver_register.

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26 21:08:38 +01:00
Srinivas Pandruvada 9e5846be33 iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
This can result in wrong reference count for trigger device, call
iio_trigger_get to increment reference.
Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion
with Jonathan.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
2014-08-25 21:48:29 +01:00
Michal Simek ff9e762158 iio: adc: xilinx: Remove .owner field for driver
There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-19 20:25:10 +01:00
Chanwoo Choi 145b0a5d18 iio: adc: exynos_adc: Add support for s3c24xx ADC
This patch add support for s3c2410/s3c2416/s3c2440/s3c2443 ADC. The s3c24xx
is alomost same as ADCv1. But, There are a little difference as following:
- ADCMUX register address
- ADCDAT mask (10 bit or 12 bit ADC resolution according to SoC version)
- s3c24xx/s3c64xx has not included ADC_PHY enable register

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07 17:48:44 +01:00
Arnd Bergmann 249535d894 iio: adc: exynos_adc: add support for s3c64xx adc
The ADC in s3c64xx is almost the same as exynosv1, but
has a different 'select' method. Adding this here will be
helpful to move over the existing s3c64xx platform from the
legacy plat-samsung/adc driver to the new exynos-adc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07 17:36:55 +01:00
Heiko Stübner 44d6f2ef94 iio: adc: add driver for Rockchip saradc
The ADC is a 3-channel signal-ended 10-bit Successive Approximation
Register (SAR) A/D Converter. It uses the supply and ground as its reference
and converts the analog input signal into 10-bit binary digital codes.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07 15:13:02 +01:00
Angelo Compagnucci 913b864686 iio: adc: Add TI ADC128S052
This patch adds support for ADC128S052 from TI.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07 14:43:25 +01:00
Julia Lawall 889c558095 iio: fix error return code
Convert a zero return value on error to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07 10:26:53 +01:00
Greg Kroah-Hartman 040bf7d63d Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle
New functionality
 * A new modifier to indicate that a rotation is relative to either
   true or magnetic north.  This is to be used by some magnetometers
   that provide data in this way.
 * hid magnetometer now supports output rotations from various variants on
   North
 * HMC5843 driver converted to regmap and reworked to allow easy support
   of other similar devices.  Support for HMC5983 added via both i2c and SPI.
 * Rework of Exynos driver to simplify extension to support more devices.
 * Addition of support for the Exynos3250 ADC (which requires an additional
   clock)  Support for quite a few more devices on its way.
 
 Cleanups
 * ad7997 - a number of cleanups and tweaks to how the events are controlled
   to make it more intuitive.
 * kxcjk - cleanups and minor fixes for this new driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT0VkRAAoJEFSFNJnE9BaIVmwP/i9/kzwHaXr09GbOMoUNlnuP
 4wU+qJTucPOlj0rNvE6VewOshkF5G1soMAc97MAlEL12mU0qXt+q9m9xu7aVnQwF
 FU87BECdmbWVSIfGnCwkm2PzN+zLmGKr/TTPdCa+kuX1WIq7tUfVwYJVqU7vxDde
 n1G5Rx3sbujwAd/kP5X0Bk35X2Wng4Af0f3tkuoRC8nFWCxXN1qW9VZHlJCp5UIh
 c4J1COUeANf26CnMbgz3qqumGtYX1gbGHi3zzD4vYxD+inqKtvg/pqTqge3J7E9D
 HBhyNn0Rd3m2DDoz/5fRQ5z/5CAKLkpsqJa9ZsYLzzmo3AHUDYoVA6tGIoExhW9q
 7P8FJgJx0Gc58V/A0Y48vcHAcqinoL+2vphc5BHZXA2wdeVHZxWO3e7HX7KUmr55
 AXlHowFf0VKoJjJtcfFkFjalF5flIfyA7Kiu+10kptj8wsoX+AjUHXPYDfeRxw+S
 7nkr/7janHvsBhoP83PqPdRSrlnNPiLJSl8ZIgegVpKOBtsRKJLGW4zlwTp1lchr
 M1ydD9eh3uUT3luKRCJzoXo60Ia15x3KBrZxIkQiORIW2otlfUm7dduICc4p9Ij7
 RjU8S1NbOVZiD8fNcbmnFp0Xj3cGf4K/Jf1Jvs/QrGB2GAuYoF48BIyeaHj0tCr8
 n4wJtDu+aly6vzM7Kf8d
 =iOto
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.17d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle

New functionality
* A new modifier to indicate that a rotation is relative to either
  true or magnetic north.  This is to be used by some magnetometers
  that provide data in this way.
* hid magnetometer now supports output rotations from various variants on
  North
* HMC5843 driver converted to regmap and reworked to allow easy support
  of other similar devices.  Support for HMC5983 added via both i2c and SPI.
* Rework of Exynos driver to simplify extension to support more devices.
* Addition of support for the Exynos3250 ADC (which requires an additional
  clock)  Support for quite a few more devices on its way.

Cleanups
* ad7997 - a number of cleanups and tweaks to how the events are controlled
  to make it more intuitive.
* kxcjk - cleanups and minor fixes for this new driver.
2014-07-24 14:57:19 -07:00
Chanwoo Choi adb4e3f4cf iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADC
This patch control special clock for ADC in Exynos series's FSYS block.
If special clock of ADC is registerd on clock list of common clk framework,
Exynos ADC drvier have to control this clock.

Exynos3250/Exynos4/Exynos5 has 'adc' clock as following:
- 'adc' clock: bus clock for ADC

Exynos3250 has additional 'sclk_adc' clock as following:
- 'sclk_adc' clock: special clock for ADC which provide clock to internal ADC

Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_adc' clock
in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_adc'
clock in FSYS_BLK.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-23 21:58:26 +01:00
Chanwoo Choi e49d99e0ec iio: adc: exynos_adc: Add exynos_adc_data structure to improve readability
This patchset add 'exynos_adc_data' structure which includes some functions
to control ADC operation and specific data according to ADC version (v1 or v2).

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-23 21:55:47 +01:00
Greg Kroah-Hartman 589e1d10ff Merge 3.16-rc5 into staging-next
We want the fixes in -rc5 in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13 15:35:56 -07:00
Peter Meerwald 3008d082f2 iio:adc:ad799x: Allow writing of event config
Allows explicity enabling of events

Previously, events were always reported as enabled, but actually only
implicitly enabled when updating the buffer scan mode

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:59:40 +01:00
Peter Meerwald 1d15330a39 iio:adc:ad799x: Return more meaningful event enabled state
only report an event as enabled if it actually is enabled

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:58:59 +01:00
Peter Meerwald 8235841b95 iio:adc:ad799x: Set conversion channels and rename ad7997_8_update_scan_mode()
rename since function is used by all chips with ALERT pin, not just ad7997/8

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:57:56 +01:00
Peter Meerwald 0f7ddcc1bf iio:adc:ad799x: Write default config on probe and reset alert status on probe
writing ALERT_EN and BUSY_ALERT to the chip config register clears
pending alerts, BUSY_ALERT is cleared when reading back the register

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:57:35 +01:00
Peter Meerwald 89ca79afe5 iio:adc:ad799x: Add helper function to read/write config register
16-bit on ad7997/ad7998, 8-bit elsewhere

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:57:09 +01:00
Peter Meerwald ef0bf6f82d iio:adc:ad799x: Make chan_spec const in ad799x_chip_config struct
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:56:49 +01:00
Peter Meerwald 91556c6939 iio:adc:ad799x: Only expose event interface when IRQ is available
an IRQ is necessary to handle the ALERT condition; without
IRQ, the IIO event interface serves no purpose

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:56:14 +01:00
Peter Meerwald e1c6e2a217 iio:adc:ad799x: Use BIT() and GENMASK()
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:55:42 +01:00
Peter Meerwald bd3bd4328a iio:adc:ad799x: Save some lines in ad7997_8_update_scan_mode() exit handling
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:48:43 +01:00
Peter Meerwald 541544712e iio:adc:ad799x: Drop I2C access helper functions
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13 21:46:54 +01:00
Greg Kroah-Hartman db7c17ecbf 3rd round of IIO new drivers, cleanups and functionality for the 3.17 cycle.
New drivers
 * isl29125 digital color light sensor driver
 * TAOS/AMS tcs3414 digital color sensor
 
 Staging graduation
 * ad7291 ADC driver.
 
 New functionality
 * st_sensors - device tree support and bindings
 * mma8452 - device tree support
 
 Cleanups
 * Drop redundant variables in a number of drivers.
 * Reorder a structure definition to ealy wiht a warning about static
   not being at the beginning in the hid-sensors driver.
 * Switch a few more drivers away from using explicit sampling_frequency
   attribute to providing this through the core.
 * Make hid_sensor_get_reporting_interval static as only used within a single
   file.
 * Drop a redundant check for negative values in an unsigned variable from
   ad9832
 * Drop some duplicate case labels in the event monitor example code.
 * Use devm_ioremap_resource to simplify error handling.
 * Use devm_kzalloc within the blackfin timer driver to simplify error
   handling and removal.
 * A number of cleanups of the ad7291 from Hartmut Knaack in response
   to a patch moving it out of staging.
 * Core support for the period info element about events.  It has been
   in the abi for a while, but not added until now to the newer handling
   of information related to events.
 * Add HAS_IOMEM dependency to mxs_lradc to avoid build issues when testing
   enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTwtZlAAoJEFSFNJnE9BaIwk0P/AjNATwzEb+ODIeYdQXbliKJ
 ntQlUXhGa1ronrSD/iDsgW7JUbSDcVDKLfZFtmO0oqdJ8Mofb03jUJqRgivpIlq9
 8cbgNZd5Ef4LARHjEsfySAEgZB6x1nnmJkspwcvdAiGqXvooe9HYQuWUkX/e9CYK
 QSb9BpisaPqvuDV3OfGlzshJIm6ntO9O842xrZdvJDAwi4IAyfabGslflA/AGWU1
 ty3duPJvJzNHfq7iJiLhbGcc4yOmtc16lPKdVcpGC8BPdjdQdrw9axFrE0aoCZwF
 zYTUeQnoZGt9ervGaYRdi6rmcoyu/waRZvJUwIbXpHE4JNgB4waU/4iGqTqfQQnd
 tV/0RRKcke4QgQ0k9lZZCHUgedW1LSFpXWFWGXezlHyCieCicrx4WVkH4wEFheC1
 6fb4OeBQY6nwkAdMOwzzHYEkieeYgKA269uKEeyJ4rMhyS36hoQNpSzMqz31c43w
 Ct0iaZdlFIEjoXkx8OumGojJ67oOGJECzfuXSn3xkNFAT2enyy/LzTyGvxGxwaMq
 r3accTdYqd00Z1Jje2MV1KRIcrn9pDJS9obFdesFQj9aV00FSSD8ZyckeHrgLxqV
 zQN567YGpyr2/q3WEW3ecJksnre1tYSwagRmfGheJIcYV/n4qiXO0R/VbSZbnFIz
 68w07E9URklroJn/3wek
 =n+vY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.17c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

3rd round of IIO new drivers, cleanups and functionality for the 3.17 cycle.

New drivers
* isl29125 digital color light sensor driver
* TAOS/AMS tcs3414 digital color sensor

Staging graduation
* ad7291 ADC driver.

New functionality
* st_sensors - device tree support and bindings
* mma8452 - device tree support

Cleanups
* Drop redundant variables in a number of drivers.
* Reorder a structure definition to ealy wiht a warning about static
  not being at the beginning in the hid-sensors driver.
* Switch a few more drivers away from using explicit sampling_frequency
  attribute to providing this through the core.
* Make hid_sensor_get_reporting_interval static as only used within a single
  file.
* Drop a redundant check for negative values in an unsigned variable from
  ad9832
* Drop some duplicate case labels in the event monitor example code.
* Use devm_ioremap_resource to simplify error handling.
* Use devm_kzalloc within the blackfin timer driver to simplify error
  handling and removal.
* A number of cleanups of the ad7291 from Hartmut Knaack in response
  to a patch moving it out of staging.
* Core support for the period info element about events.  It has been
  in the abi for a while, but not added until now to the newer handling
  of information related to events.
* Add HAS_IOMEM dependency to mxs_lradc to avoid build issues when testing
  enabled.
2014-07-13 12:31:47 -07:00
Jan Kardell baa3c65298 iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends
Since AI lines could be selected at will (linux-3.11) the sending
and receiving ends of the FIFO does not agree about what step is used
for a line. It only works if the last lines are used, like 5,6,7,
and fails if ie 2,4,6 is selected in DT.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: stable@vger.kernel.org
2014-07-08 21:21:22 +01:00
Lars-Peter Clausen 3b1cae7c2c staging:iio:ad7291: Move out of staging
The ad7291 driver is in a reasonable shape. It does not use non-standard API/ABI
and there are no major style issues with the driver. So this patch moves it out
of staging.

There is one small warning from checkpatch which is also fixed in this patch.
The patch also sorts the #include directives in alphabetical order.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-08 21:17:30 +01:00
Greg Kroah-Hartman c1a567d31b Merge 3.16-rc4 into staging-next
We want the staging tree fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07 17:59:07 -07:00
Sachin Kamat fc96d25ad0 iio: xilinx-xadc: Remove unused variable
'offset’ is not used in the function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-03 22:00:40 +01:00
Greg Kroah-Hartman 3dc50c1af3 Second round of new drivers and cleanups for IIO in the 3.17 cycle.
New drivers
 * mcp4902, mcp4912 and mcp4922 SPI DAC driver.
 * max1027, max1029 and max1031 SPI ADC driver.
 
 Cleanups
 * cm32181 - use devm APIs to simplify error paths.
 * ak8975 - use devm APIs to simplify error paths.
 * ad9850 - drop some unused defines and an unnecessary goto.
 * hmc5843 - add missing devices to the device id table and the documentation.
 * ad9832 - small formatting cleanups.
 * sca3000 - hide direct use of the stufftoread element by adding a
     data_available function.  This is a precursor for the addition of buffer
     watermarks to the subsystem but stands as a good cleanup on its own.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTsCi1AAoJEFSFNJnE9BaIncoP/i6vgt+l+jM7qCvD8xCa4Kto
 hwwXrtYEmAekAYcdcKesR/xBMw6Y1njjtPvnuOOXkxNcqLLhDUvvCGPvC2hsqNs1
 sZfq/KdzmgLNiy6FlprnVYAtoWL8yWiSdPa/aG7FAD/swOnrjQ+Dch/Kw0ha82dF
 CaoTLzLwwBr4V0m8XY4c6Uvgb+ywjYGsVspu69WKlMxnP9gGsb/e9QnqZteGwwxa
 D3ooy3dXdKzl3lc5y9HXqVDwFaennBxSiWtEHJZWUWt9QTeomeoSQuEa/6sJU9Fd
 MjOHiFuiiHF+fSCzvOKKudi3PFW//ztJjQQHlFbf7AojUH6uAnKuHzQ6mCM7dkH2
 h3pCidScC+nnPvJ4rF9uKHtj7kbch2vS0eT38BK04pCUiEOhv/55xIzFxLO58xFf
 d1a7Jlfyx498x0AVffPe+R/4a4/2cJWThB1lpPPKjq0Mm9Q5hdvHLTwloGCWfmVT
 k6y43xw0fC1DoNrXRe5aH8j7ih8CF1RaZowyWeEplIWDTrLixFqiZsVB6LwFjNxN
 ggTLK2rHfGlKEumqq7RlZGPSpkBs5a86KsuREEd169QCZYt2KCu5sZhW7+XKYPqa
 yIuGBfYXYAaaz71kK621jxKUhB3V61blUOX2/R1Cu4Mg02i441FibR04LquVReFy
 YNIGv95sgAsqXnfXHqfV
 =3Fhy
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.17b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new drivers and cleanups for IIO in the 3.17 cycle.

New drivers
* mcp4902, mcp4912 and mcp4922 SPI DAC driver.
* max1027, max1029 and max1031 SPI ADC driver.

Cleanups
* cm32181 - use devm APIs to simplify error paths.
* ak8975 - use devm APIs to simplify error paths.
* ad9850 - drop some unused defines and an unnecessary goto.
* hmc5843 - add missing devices to the device id table and the documentation.
* ad9832 - small formatting cleanups.
* sca3000 - hide direct use of the stufftoread element by adding a
    data_available function.  This is a precursor for the addition of buffer
    watermarks to the subsystem but stands as a good cleanup on its own.
2014-06-29 09:49:28 -07:00
Philippe Reynes fc167f6248 iio: add support of the max1027
This driver add partial support of the
maxim 1027/1029/1031. Differential mode is not
supported.

It was tested on armadeus apf27 board.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-28 09:54:14 +01:00
Greg Kroah-Hartman ef7994fa2a Merge 3.16-rc2 into staging-next
We want the staging fixes here as well.
2014-06-22 12:33:51 -04:00
Peter Meerwald 361d795002 iio:adc:ad799x: Fix reading and writing of event values, apply shift
last two bits of ADC and limit values are zero and should not be reported
(ad7993, ad7997); compare with read_raw()

event values are 10 (ad7993, ad7997) or 12 bit max., check the range on write

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Stable@vger.kernel.org
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-21 10:43:13 +01:00
Greg Kroah-Hartman f641f66784 First round of new drivers, cleanups and functionality for the 3.17 cycle.
New drivers
 * t5403 barometric pressure sensor
 * kxcjk1013 accelerometer (with a locking followup fix).
 * ak09911 digital compass
 
 Documentation
 * ABI docs for proximity added (interface has been there a long time but
   somehow snuck through without being documented)
 * Move iio-trig-sysfs documentation out of staging (got left behind when
   the driver moved some time ago).
 
 Cleanups
  * drop the timestamp argument from iio_trigger_poll(_chained) as
    nothing has been done with it for some time.
  * ad799x kerneldoc for ad799x_chip brought up to date.
  * replace a number of reimplementations of the GENMASK macro and
    use the BIT macro to cleanup a few locations.
  * bring the iio_event_monitor example program up to date with new
    device types.
  * fix some incorrect function prototypes in iio_utils.h example code.
  * INDIO_RING_TRIGGERED to INDIO_BUFFER_TRIGGERED fix in docs. This
    got left behind after we renamed it a long time back.
  * fix error handling in the generic_buffer example program.
  * small tidy ups in the iio-trig-periodic-rtc driver.
  * Allow reseting iio-trig-periodic-rtc frequency to 0 (default) after
    it has changed.
  * Trivial tidy ups in coding style in iio_simply_dummy
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJToc7KAAoJEFSFNJnE9BaIs2wP/2dHUUs2SWtCBQZACBUVzFlt
 UXiyeUtk0W6KfcbqgWt7zRD4KjGnvoN9W6Tp2wT8YAcsDYP+nxroIiZcz3Zi+cMl
 9T1lsdZ2UAvz43OvGOem/FUx6eN6E4l6ZTs8TpT3OUGTWgsaxbrJ6E6jlJYKSBZQ
 LZOmqwF/+piTiJCw7mAT7AxbMJIU66Jt5jEStvrQC1V4gdaiBgpUnRDwyEycy2OY
 9qs9V1L5HNHdMew3hCB98rK5lW2Ty+F0GObZa9i16yswNqKIGB4iylZNpWA8V0TA
 LLXIwC6AxtjoKoIkiHzGBVUuSR7MLsIa+9IN+ZaHlOUdL1R95u8lIZopjZrk798W
 3nYQ1j9++Mz1eXjzolsvySPq+eBek7Sgc+8Wn3JgtkyZmXnS8ivmdyX+UWc/pC8K
 MQ1H3uJJiA6GyA1zvlWviYciIcWrZQQOYLPylhlVFqboDX86ymsewUZYSyN0ZzG5
 CeaDafB2UQiY7eHWNWjZsTkhlOTRTPGh29MoYtNG+Mo7FxYxu5IrjqUZJNar0R7z
 5vsMj8lRYz3JQLdEBTddZeZnCIXDTrlbcpDy9ERCBqWqQEBtb0ihgGz68RkfkpFm
 AQ975J5cFrJtDDmRsQlMPJEjV0tQ5bZkwrRMqn3eYDwY3qc6mTyHs6w4WQtwUoX2
 GYs2axH3ifj4lZCMQN5w
 =S0CY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, cleanups and functionality for the 3.17 cycle.

New drivers
* t5403 barometric pressure sensor
* kxcjk1013 accelerometer (with a locking followup fix).
* ak09911 digital compass

Documentation
* ABI docs for proximity added (interface has been there a long time but
  somehow snuck through without being documented)
* Move iio-trig-sysfs documentation out of staging (got left behind when
  the driver moved some time ago).

Cleanups
 * drop the timestamp argument from iio_trigger_poll(_chained) as
   nothing has been done with it for some time.
 * ad799x kerneldoc for ad799x_chip brought up to date.
 * replace a number of reimplementations of the GENMASK macro and
   use the BIT macro to cleanup a few locations.
 * bring the iio_event_monitor example program up to date with new
   device types.
 * fix some incorrect function prototypes in iio_utils.h example code.
 * INDIO_RING_TRIGGERED to INDIO_BUFFER_TRIGGERED fix in docs. This
   got left behind after we renamed it a long time back.
 * fix error handling in the generic_buffer example program.
 * small tidy ups in the iio-trig-periodic-rtc driver.
 * Allow reseting iio-trig-periodic-rtc frequency to 0 (default) after
   it has changed.
 * Trivial tidy ups in coding style in iio_simply_dummy
2014-06-18 20:02:33 -07:00
Greg Kroah-Hartman e28642c04a First set of IIO fixes for the 3.16 cycle.
A mixed bag of fixes, many of which feel just to late for 3.15.
 
 * hid sensors - some devices need a feature report request in order to
   change power state.  This isn't part of the spec, but has been observed
   on several devices and does no harm to others.
 * mpl3115 has had two errors in the buffer description fixed. The presure is
   signed, not unsigned and the temperature has 12 bits rather than 16.
   These could lead to incorrect interpretation of the data in userspace.
 * tsl2x7x - the high byte of the proximity thresholds should be written along
   with the low byte (which was). This could lead to interesting results
   with large thresholds.
 * twl4030 - a flag to specify processed values were required was not set
   when initializing a reading.  As such values returned were in an unknown
   state. Fixed by simply initializing it appropriately.
 * IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig
   build errors.
 * ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework
   already performs one.  As such for big endian systems, the bytes would be
   in the wrong order in the magnetic field measurements reported.
 * mxs-lradc - the controllable voltage dividers were not enabled / disabled for
   later channels than the first one during conversion.
 * at91_adc error handling returned -ENOMEM in a u8. Return value of
   at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and
   also original values to be returned.
 * mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for
   NULL to detect an error.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJTnLYyAAoJEFSFNJnE9BaI6r4QAK22hjl1J3xoWwOPUJhfJ5Hh
 VTjwO1OxwQ1XtUN5WneeJM73eu6moXD/avG2NbX4orAkNjSXKL6+/3WAds/rYMj2
 0vPiJsKsGBBlhu2w2RU80xVOPT2/XXIH3bYWDiUlr/i6DLEh8mU3kKX/yZzF+cIn
 hheYnOHZzLqGH8JircScEJv+B06svZtlfoDeLYaKY03HupTvEH95mvCSZk71PxZb
 A+7Qb3nDlZrpLBFKj4L5x15MIoEgopID2pX0kHLNY2DE1sopr2Z+FgSa3u/wtSEx
 k/ViyHPRk1mjTrQ92RMmTF5lMts6JFCmMgpPCNmcSyRKt6Fe6KcCMiWIlSs9I69i
 6KAIes5XpP7Qti5Yd4gi70uiq7fL1hR18Yhzv6IdmNdS8iJhk53YiWDYiYBgXwWS
 rcOva4NsaoeLYUdNJZRtap3RLsQRKAxg7HNhL+G88rr3wCsA0P7rb6BMdFK+3MiS
 BDcYe8mHIzX9tJZa4EU8kOdr+aphQeDt1nH4aZDWT3J7fo6RWrWcPMWFAcx+1jp3
 VVDL6Jn8WIuxYIDFznSQ6T6tvsvuqPgCqOA0ygfzvruo3m/oWvTT/+i2YFotGH3Y
 7Mlw7TACAmcuZStBLg6R0R1fD39zpfp4/+GNRxFaaB8otMPyrbizb0HBcaksQCp0
 0MTbFSjuAlXZ3NhVIm2O
 =RuB2
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 3.16 cycle.

A mixed bag of fixes, many of which feel just to late for 3.15.

* hid sensors - some devices need a feature report request in order to
  change power state.  This isn't part of the spec, but has been observed
  on several devices and does no harm to others.
* mpl3115 has had two errors in the buffer description fixed. The presure is
  signed, not unsigned and the temperature has 12 bits rather than 16.
  These could lead to incorrect interpretation of the data in userspace.
* tsl2x7x - the high byte of the proximity thresholds should be written along
  with the low byte (which was). This could lead to interesting results
  with large thresholds.
* twl4030 - a flag to specify processed values were required was not set
  when initializing a reading.  As such values returned were in an unknown
  state. Fixed by simply initializing it appropriately.
* IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig
  build errors.
* ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework
  already performs one.  As such for big endian systems, the bytes would be
  in the wrong order in the magnetic field measurements reported.
* mxs-lradc - the controllable voltage dividers were not enabled / disabled for
  later channels than the first one during conversion.
* at91_adc error handling returned -ENOMEM in a u8. Return value of
  at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and
  also original values to be returned.
* mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for
  NULL to detect an error.
2014-06-18 10:41:08 -07:00
Peter Meerwald 398fd22b6b iio: Remove timestamp argument from iio_trigger_poll() and iio_trigger_poll_chained()
argument has been ignored; adjust drivers accordingly

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14 16:25:59 +01:00
Dan Carpenter e94f62e79f iio: adc: checking for NULL instead of IS_ERR() in probe
mcb_request_mem() returns an ERR_PTR(), it doesn't return NULL.

Fixes: 74aeac4da6 ('iio: adc: Add MEN 16z188 ADC driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
2014-06-14 16:16:43 +01:00
Peter Meerwald 488980532d iio:adc:ad7298: Use BIT() and GENMASK() macros
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14 16:04:24 +01:00
Peter Meerwald bc74fb8191 iio:adc:ad7476: Use GENMASK() macro
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14 16:03:48 +01:00
Peter Meerwald 09a1737e55 iio:adc:ad7887: Use BIT() and GENMASK() macros
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14 16:03:19 +01:00
Dan Carpenter 4f3bcd878f iio: adc: at91: signedness bug in at91_adc_get_trigger_value_by_name()
at91_adc_get_trigger_value_by_name() was returning -ENOMEM truncated to
a positive u8 and that doesn't work.  I've changed it to int and
refactored it to preserve the error code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
2014-06-14 15:31:20 +01:00
Peter Meerwald a3eeb1591a iio:adc:ad799x: Fix ad799x_chip_info kerneldoc
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-14 15:20:58 +01:00
Linus Torvalds 5142c33ed8 Staging driver patches for 3.16-rc1
Here is the big staging driver pull request for 3.16-rc1.
 
 Lots of stuff here, tons of cleanup patches, a few new drivers, and some
 removed as well, but I think we are still adding a few thousand more
 lines than we remove, due to the new drivers being bigger than the ones
 deleted.
 
 One notible bit of work did stand out, Jes Sorensen has gone on a tear,
 fixing up a wireless driver to be "more sane" than it originally was
 from the vendor, with over 500 patches merged here.  Good stuff, and a
 number of users laptops are better off for it.
 
 All of this has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlONXKQACgkQMUfUDdst+ynIwgCgq5pPIn+2aewaFK8rrN18xqls
 F3YAoNDYeqMpQepvRe50HcjRrgDvsV2n
 =VenO
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into next

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 3.16-rc1.

  Lots of stuff here, tons of cleanup patches, a few new drivers, and
  some removed as well, but I think we are still adding a few thousand
  more lines than we remove, due to the new drivers being bigger than
  the ones deleted.

  One notible bit of work did stand out, Jes Sorensen has gone on a
  tear, fixing up a wireless driver to be "more sane" than it originally
  was from the vendor, with over 500 patches merged here.  Good stuff,
  and a number of users laptops are better off for it.

  All of this has been in linux-next for a while"

* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
  staging: skein: fix sparse warning for static declarations
  staging/mt29f_spinand: coding style fixes
  staging: silicom: fix sparse warning for static variable
  staging: lustre: Fix coding style
  staging: android: binder.c: Use more appropriate functions for euid retrieval
  staging: lustre: fix integer as NULL pointer warnings
  Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
  Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
  staging: ion: shrink highmem pages on kswapd
  staging: ion: use compound pages on high order pages for system heap
  staging: ion: remove struct ion_page_pool_item
  staging: ion: simplify ion_page_pool_total()
  staging: ion: tidy up a bit
  staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
  staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
  staging: rtl8723au: Remove redundant casting in rtw_xmit.c
  staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
  staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
  staging: rtl8723au: Remove redundant casting in rtw_recv.c
  staging: rtl8723au: Remove redundant casting in rtw_mlme.c
  ...
2014-06-03 08:34:00 -07:00
Linus Torvalds 825f4e0271 ARM: SoC updates for 3.16 (part 1)
A quite large set of SoC updates this cycle. In no particular order:
 
 - Multi-cluster power management for Samsung Exynos, adding support for
   big.LITTLE CPU switching on EXYNOS5
 - SMP support for Marvell Armada 375 and 38x
 - SMP rework on Allwinner A31
 - Xilinx Zynq support for SOC_BUS, big endian
 - Marvell orion5x platform cleanup, modernizing the implementation and
   moving to DT.
 - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
   that their platform can be enabled in the same kernel binary as most
   of the other v7 platforms in the tree. \o/ The work isn't quite complete,
   there's some driver fixes still needed, but the basics now work.
 
 New SoC support added:
 - Freescale i.MX6SX
 - LSI Axxia AXM55xx SoCs
 - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
 - STi STIH407
 
 Plus a large set of various smaller updates for different platforms. I'm
 probably missing some important one here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjOKWAAoJEIwa5zzehBx36aEP/2vTD7x9FC59FACNHJ8iO7aw
 0ebTgBBjI1Np6X18O+M7URbxV5TaBgwpUm/NDN86p03MpQ2eOXr8r47qVxe/HhZs
 AdlTvzgE6QwxcVL/HeCKKUEN3BPH74+TZgFl9I5aSzNjpR39xETeK1aWP/ZiAl/q
 /lGRZAQ59+c7Ung00Hg0g2YDxH9WFpK50Nj90ROnyjKSFkhIYngXYVpZB3maOypq
 Pgib/U8IraKZ52oGJw3yinSoORr7FdcUdAGWGTz/lQdNL/jYDfQ6GkRW2oblWXdt
 3Xvj9UW6NmkbMICucMvFuuW1nXAgutZuTp9w7mBxsiUlYepxPv/DXM6yiI1WGlEb
 BeVOmOreNeN2nT6avv/uUhk3Osq63Jn9x8cz5y+7/lgWQwllh3/c+G01RotvgJEQ
 vpQq5ps9fMxIAMaNP6N/YqMJI1IOrBj0iXxaZEDw3VYM/k4lSvtb3VXP9c/rqApu
 U4i6hpSIGzrraU4NrjndYPndcLeNOVZbByETQKosZXuCo6G1sb7FstNSkzI9vSo8
 O/pujIVUfYyBW82GzZGDw+aa7DWA29FPeUQ3p+sj5MSCg051xXT8h6QwqMo2K/zY
 5ATs/qo6w7zH/Ou9rtHTRynCIb0GQJThDSlWtuXFedUF9quEltS+TDz/2o+dWtGJ
 yBFGKDRuBB20D36w9xqg
 =6LYI
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...
2014-06-02 16:15:12 -07:00
Paul Kocialkowski e0326be0cd twl4030-madc: Request processed values in twl4030_get_madc_conversion
Not setting the raw parameter in the request causes it to be randomly
initialized to a value that might be different from zero or zero. This leads to
values that are randomly either raw or processed, making it very difficult to
make reliable use of the values.

Cc: Stable@vger.kernel.org
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-02 21:53:27 +01:00
Greg Kroah-Hartman 588079342e Third round of new stuff for IIO in the 3.16 cycle.
This (rather late) set consists only of fixes to patches earlier in the
 cycle or minor fixes for other problems (such as randconfig build issues
 picked up by Arnd).  I've included the general minor fixes here as it is
 very late in the current cycle and they can all wait for the merge window.
 
 * Recent change to hid-sensors introduced a possible infinite loop due to a
   typo. In the same series, a report interval unit read was added but in the
   case where the hardware doesn't support it a value of 0 would lead to some
   nasty issues.  The patch sets it to the specified default of msecs.
 * Anon inodes were used by IIO without being explicitly selected.  This has
   been true for a long time so it clearly only effects rather unusual
   configurations (rand configs)
 * at91 requires the input subsytem but this wasn't explicity in the Kconfig.
 * A couple of parts supported by the max1363 driver were using the wrong
   iio_chan_spec arrays and hence would missreport their bit depths.  This has
   been there a long time and was never right so isn't a regression.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTgdLAAAoJEFSFNJnE9BaIDBwP/jGJ4cOV4mKekQvn+keMCQ8M
 fPyKRijwgWE9VEVP6BbhA5ya4hwH6bloQXBBp2PhB51GS1I8pNc5dWJzQEZO+oFA
 9jkQm91zufeRjxEUCRlD8kfJ+7V766SKlIkENbJgbk5XStvrAWAIQ8lHkHwJmL5j
 lNfGWCrVuBKK3Ck08HH6p2N6hHO1GDHnyrdGIW2BYJZVyUBpBlkukSZoU8T0zB6g
 F9QzZyECG9VdbL1HVBrsBy3Pw9cOwiMTJrDMJ2dkwBdKmAnkllSomrKV5cOlYWFF
 qg3z6JOPPY+6Hpl15tr2RvTaoKYTc33q9/UX1sysrLyLN07W52ygXdozxTGUINB2
 ozhmIp/oZVYyHXIHC3yg7MOhW6AExJkzr91IMNnvVT8f22BlkdXHRB0atCAHcUvT
 t4NsFHS0QrRYooqVI12Z3wOPmZahydgUlivNySRaug4lYgULxl5pts9WAl8fEgA7
 ZM4tUUtGjrni5KpaYT5wnQ2JhwNTZDu2kIYgRB5Zhh5F/uqJ/xQCjllhJxv92hKG
 r6LvacGaWiwyYXryl4TvfqH1/4lqsFk8nyS0OLUFhtCfE8jmydSZ63LhnnQJs/iH
 u0u/uDz9lqPgtClWZDm3YqIMRpp4ShNkn8irBZ9bLhaHC59GurgYMM+PgkrUPM/N
 7y76UVWNYNWxYb/L0A5n
 =u2ra
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.16c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of new stuff for IIO in the 3.16 cycle.

This (rather late) set consists only of fixes to patches earlier in the
cycle or minor fixes for other problems (such as randconfig build issues
picked up by Arnd).  I've included the general minor fixes here as it is
very late in the current cycle and they can all wait for the merge window.

* Recent change to hid-sensors introduced a possible infinite loop due to a
  typo. In the same series, a report interval unit read was added but in the
  case where the hardware doesn't support it a value of 0 would lead to some
  nasty issues.  The patch sets it to the specified default of msecs.
* Anon inodes were used by IIO without being explicitly selected.  This has
  been true for a long time so it clearly only effects rather unusual
  configurations (rand configs)
* at91 requires the input subsytem but this wasn't explicity in the Kconfig.
* A couple of parts supported by the max1363 driver were using the wrong
  iio_chan_spec arrays and hence would missreport their bit depths.  This has
  been there a long time and was never right so isn't a regression.
2014-05-25 10:56:30 -07:00
Jonathan Cameron a91a73c8b3 iio:adc:max1363 incorrect resolutions for max11604, max11605, max11610 and max11611.
Cc: Stable@vger.kernel.org>
Reported-by: Erik Habbinga <Erik.Habbinga@schneider-electric.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
2014-05-25 12:06:25 +01:00
Greg Kroah-Hartman 69c1f05379 Merge 3.15-rc6 into staging-next.
This resolves the conflicts in the files:
	drivers/iio/adc/Kconfig
	drivers/staging/rtl8723au/os_dep/usb_ops_linux.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-22 23:27:17 +09:00
Arnd Bergmann 758ee467d3 iio:adc: at91 requires the input subsystem
Building the at91 adc driver with CONFIG_INPUT disabled results in this
build error:

ERROR: "input_event" [drivers/iio/adc/at91_adc.ko] undefined!
ERROR: "input_unregister_device" [drivers/iio/adc/at91_adc.ko] undefined!
ERROR: "input_free_device" [drivers/iio/adc/at91_adc.ko] undefined!
ERROR: "input_register_device" [drivers/iio/adc/at91_adc.ko] undefined!
ERROR: "input_set_abs_params" [drivers/iio/adc/at91_adc.ko] undefined!
ERROR: "input_allocate_device" [drivers/iio/adc/at91_adc.ko] undefined!

To make sure we can build random configurations, this adds a Kconfig
dependency on CONFIG_INPUT, as we do for other similar drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-iio@vger.kernel.org
Cc: Josh Wu <josh.wu@atmel.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-10 11:42:09 +01:00
Alexandre Belloni 65b1fdbac9 iio: adc: at91: add sam9rl support
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:28:40 +02:00
Alexandre Belloni bee20c4be1 iio: adc: at91: remove unused include from include/mach
That include file is now only used by the at91_adc driver, remove it from
include/mach for better driver separation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:28:40 +02:00
Alexandre Belloni 84882b0603 iio: adc: at91_adc: Add support for touchscreens without TSMR
Old ADCs, as present on the sam9rl and the sam9g45 don't have a TSMR register
and the touchscreen support should be handled differently.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:28:40 +02:00
Alexandre Belloni 2de0c019f3 iio: adc: at91: cleanup platform_data
num_channels and registers are not used anymore since they are defined inside
the driver and assigned by matching the id_table.

Also, struct at91_adc_reg_desc is now only used inside the driver.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-07 18:28:39 +02:00
Dan Carpenter 82a5803c78 staging: iio: ad799x: remove some unneeded IS_ERR() checks
My static checker is upset that we check IS_ERR(t->reg) when we know it
is not an ERR_PTR.

Checking for IS_ERR() twice is often a sign of confusion and buggy code.
In this case, if the call to "ret = regulator_enable(st->vref);" fails,
then we call "regulator_disable(st->vref);" and that's a mistake because
"st->vref" is not enabled.

I fixed these problems and Hartmut Knaack pointed out a couple unneeded
IS_ERR() checks in ad799x_remove() so I have removed those as well.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-05-03 11:14:01 +01:00
Naveen Krishna Chatradhi 6442d94ba1 iio: exynos_adc: do a reinit_completion before the conversion
Add reinit_completion() before the wait_for_completion_timeout in
raw_read() call.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-30 21:47:47 +01:00
Naveen Krishna Chatradhi dd2723f57e iio: exynos_adc: do a soft reset in case of timeout
Do a soft reset software if a timeout happens.
This is applicable only for ADC_V2.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-30 21:47:15 +01:00
Naveen Krishna Chatradhi c780a8c241 iio: exynos_adc: reduce timeout and use wait_for_completion_timeout
ADC module on Exynos5 SoCs runs at 600KSPS. At this conversion rate,
waiting for 1000 msecs is wasteful (incase of h/w failure).

Hence, reduce the time out to 100msecs and use
wait_for_completion_timeout() instead of
wait_for_completion_interruptible_timeout()

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-30 21:46:37 +01:00
Naveen Krishna Ch 2bbc724725 iio: exynos_adc: rearrange clk and regulator enable/disable calls
This patch maintains the following order in
probe(), remove(), resume() and suspend() calls

regulator enable, clk prepare enable
...
clk disable unprepare, regulator disable

While at it,
1. enable the regulator before the iio_device_register()
2. handle the return values for enable/disable calls

Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-30 21:42:53 +01:00
Greg Kroah-Hartman 37aa48368f Merge 3.15-rc3 into staging-next 2014-04-27 21:38:34 -07:00
Greg Kroah-Hartman d5cef008e9 First round of IIO new driver, functionality and cleanups for the 3.16 cycle.
New device support
 * AS3935 Lightning Sensor
 * MCP3426/7/8 support added to the existing MCP3422 ADC driver
 * AK8963 support in the AK8975 driver
 * MPU6500 support in the MPU6050 driver (the functionality that is different
   is mostly not supported yet in either part).
 
 Staging Graduations
 * AD799x ADC
 
 New functionality
 * ACPI enumeration for the ak8975 driver
 
 Cleanup / tweaks
 * Use snprintf as a matter of good practice in a few additional places.
 * Document *_mean_raw attributes.  These have been there a while, but were
   undocumented.
 * Add an in kernel interface to get the mean values.
 * Bug in the length of the event info mask that by coincidence wasn't yet
   actually causing any problems.
 * itg3000 drop an unreachable return statement.
 * spear_adc cleanups (heading for a staging graduation but a few more
   issues showed up in the review of these patches).
 * Exynos ADC dependencies changed so it is only built when Exynos is present
   or COMPILE_TEST and OF are set.
 * tsl2583 cleanups.
 * Some cut and paste typos in the comments of various drivers still in staging.
 * Couple of minor improvements to the ST sensor drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTW8asAAoJEFSFNJnE9BaITYoP/1rONn2PS1t61CI4rtWDVZh8
 SEn4EQCxRVVAdWCQQz1zY0JZeUSjuWcPi7+MJ/VNaw6efOXN0J4O+bsNfh5Asju2
 88giAUuP+hmd4xccGkxaJvdXEhruRMzGugh3/6+L2XuhkJsorAhJe/63XTq+JNOp
 Tq6NHVmqV507wuDOguXfUQ2eDKPEFiTBUiutLJqyLOOi5zEq/X3Cnv+YMCDx4coE
 BwZEQnXJWLfMSvXQtbTAl1XwqvDY8bjMNwFvjRuTLN73ua0/gMe//kJV/2tm8UMF
 90Fs3TPi/cc5QkvpKMC9DP8eeAMi11bRdSRN0/abEQgglCz1LzWuX5Gqpr5psrhM
 q1KS9JU9u4oZ8PR49c8QWjN0RtNiKiVVhCgBVcNE/2uYVwQqu0kJWylsq/m2+7jr
 99qi8R979b5GoX69TKjVyr9MyGbN2x/vKWm3+UgtujqzXgu7GGdXa6NhrcPGcYjW
 /uH3rfW4w0rBFVEJzDXkj74n/j2WDvrukjqYgABfENfBqO14swc0nlBGGyjli0uv
 tUiwwS05Fax8wmuMP/wlII7Bq9XA8e+QISXHeO318svP/9SPxRuRwsd2Oo7BxXZz
 e6gm5i142XeiSc3KjLGEUAZ+qF7xKUfEZwIajkWZ8LIgeROfDLzNEjvVsU2Byk+0
 g+XrtWm4jljKHzjV/33g
 =eqGz
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of IIO new driver, functionality and cleanups for the 3.16 cycle.

New device support
* AS3935 Lightning Sensor
* MCP3426/7/8 support added to the existing MCP3422 ADC driver
* AK8963 support in the AK8975 driver
* MPU6500 support in the MPU6050 driver (the functionality that is different
  is mostly not supported yet in either part).

Staging Graduations
* AD799x ADC

New functionality
* ACPI enumeration for the ak8975 driver

Cleanup / tweaks
* Use snprintf as a matter of good practice in a few additional places.
* Document *_mean_raw attributes.  These have been there a while, but were
  undocumented.
* Add an in kernel interface to get the mean values.
* Bug in the length of the event info mask that by coincidence wasn't yet
  actually causing any problems.
* itg3000 drop an unreachable return statement.
* spear_adc cleanups (heading for a staging graduation but a few more
  issues showed up in the review of these patches).
* Exynos ADC dependencies changed so it is only built when Exynos is present
  or COMPILE_TEST and OF are set.
* tsl2583 cleanups.
* Some cut and paste typos in the comments of various drivers still in staging.
* Couple of minor improvements to the ST sensor drivers.
2014-04-26 08:12:25 -07:00
Doug Anderson bbc28134e9 iio: adc: Nothing in ADC should be a bool CONFIG
The whole IIO subsystem can be built as modules.  If you make it a
module then stuff marked as "Y" in the adc directory simply won't be
linked in properly.

The two configs that were wrong were EXYNOS_ADC and LP8788_ADC.  I
know for a fact that EXYNOS_ADC will work as a module. I assume
LP8788_ADC will also be fine.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26 11:22:16 +01:00
Naveen Krishna Ch 3d821a1747 iio: exynos_adc: use indio_dev->dev structure to handle child nodes
Using pdev->dev with device_for_each_child() would iterate over all
of the children of the platform device and delete them.
Thus, causing crashes during module unload.

We should be using the indio_dev->dev structure for
registering/unregistering child nodes.

Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26 11:19:40 +01:00
Masanari Iida e3c5be2bda staging: iio: Fix typo in iio
Correct spelling typo in comment within staging/iio

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-23 21:44:41 +01:00
Greg Kroah-Hartman 8b425aa193 First found of IIO fixes for the 3.15 cycle.
* Fix the platform data support for the at91 adc driver.
 * A couple of related follow up patches get the support working again
   for at91sam9260 and at91sam9g45 as the earlier patch results in a device
   name change.
 * A default timer value in the at91 adc driver was bonkers.  Make it sane.
 * Fix incorrect reporting of the integration time for the cm32181 light sensor
 * Fix a missing break in the ad2s1200 driver which would have give a false
   error return.
 * Make sure buffer scan mask queries from userspace return 0/1 rather than
   a fairly random value depending on their implementation of test_bit
 * Fix leak of the i2c client and a null pointer dereference in the cm36651
   driver.
 * Fix a build warning on avr32 for the mxs-lradc (not exactly a critical
   combination - but the issue was real).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTSX1HAAoJEFSFNJnE9BaIGkoQAIotGana51TXPo9KYnQJaCYH
 +xBfaaXEaR69lARoXT8SDGzyXPCQNOEbVfsXRwrVQ4Wl8x2hP8n9YdUrAHzZ/8O/
 Wf8Z0jb81Q+KNJ+SMMgcy4kK5OU71EMMk5fbocPzD+WfQ+WlDr+My1F3yZ5UIvOM
 nOUF6QCcYA0MN7dopEVIqyP8HZhrxR1YUvgzqOmp1fteYL4gFCU006WPSI30GxEv
 fMM8MiWbbn9xjOsR7SBzaLEo0Hv3YC92zwSAuJxGClH/+9cKogWAaE/PiNUO3y6A
 +2D0KQnGRopKy4j/QCjdPZsTmYDBxQ9vMlUOtRlOf1XAVjL6pZu2EJ2/ereShLW6
 B4rev23tqgk9nyNk/Li4n+5krzvPqqOcbWNW1la769DkEt7LU+YU+hiShkDm1+0M
 6hwxPd6gQxg0QUjuusi1+B5JqweAv+mEcCsQ+ga6ZK61X9bNJ6c/4YF451rkNhc6
 mlC3ZqBvDALmNSVdCas0GOGHLaeWxfoT7E9G6p62h9uBVerqZ6epvlAUC6JOHotc
 /qz/D1VL1+ptPAawXiFSNOb8RMJogdBfjPB9bOlYQSSHV3eF0RVNK6FQiqvc4mFX
 or1pPG6lDLGm6g3NcDEjxEEVThevQpEwKmpM0TCEUMiIuxSHYN/M//P2PSeDvYwk
 9k8x3fJae7dWNsGIT92y
 =HMr3
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First found of IIO fixes for the 3.15 cycle.

* Fix the platform data support for the at91 adc driver.
* A couple of related follow up patches get the support working again
  for at91sam9260 and at91sam9g45 as the earlier patch results in a device
  name change.
* A default timer value in the at91 adc driver was bonkers.  Make it sane.
* Fix incorrect reporting of the integration time for the cm32181 light sensor
* Fix a missing break in the ad2s1200 driver which would have give a false
  error return.
* Make sure buffer scan mask queries from userspace return 0/1 rather than
  a fairly random value depending on their implementation of test_bit
* Fix leak of the i2c client and a null pointer dereference in the cm36651
  driver.
* Fix a build warning on avr32 for the mxs-lradc (not exactly a critical
  combination - but the issue was real).
2014-04-22 21:29:20 -07:00
Jean Delvare 9ef080ec0c iio: adc: Fix exynos_adc dependencies
EXYNOS_ADC shouldn't only depend on OF. It is useless on architectures
other than Exynos so it should depend on ARCH_EXYNOS (which implies
OF.)

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-11 21:48:22 +01:00
Linus Torvalds e5744abb2f == Changes to existing drivers ==
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
    - Advanced error handling - omap
    - Rework clk management - omap
    - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
    - IRC management overhaul and !BROKEN - pm8921
    - Convert to regmap - ssbi, pm8921
    - Use simple power-management ops - ucb1x00
    - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
       - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
       	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
 	tps65912, vexpress-config, wm8350, ywm8350
    - Various bug fixes across the subsystem
       - NULL/invalid pointer dereference prevention
       - Resource leak mitigation,
       - Variable used initialised
       - Staticise various containers
       - Enforce return value checks
 
  == New drivers/supported devices ==
    - Add support for s2mps14 and s2mpa01 to sec
    - Add support for da9063 (v5) to da9063
    - Add support for atom-c2000 to gpio-ich
    - Add support for come-{mbt10,cbt6,chl6} to kempld
    - Add support for da9053 to da9052
    - Add support for itco-wdt (v3) and baytrail to lpc_ich
    - Add new drivers for tps65218, rtsx_usb, bcm590xx
 
  == (Re-)moved drivers ==
    - twl4030 ==> drivers/iio
    - ti-ssp  ==> /dev/null
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQmHbAAoJEFGvii+H/HdhXgAQAI6dNLb3AfNol49pNh5nEcrt
 sixQwu56xe64xozcMq41oXcbIe6NOvd/Sgf57fowCqrNyXd3k2sp6/KzA1yM8yfc
 2Xfm2fzzMoyH3lEopepT0zKMEyeOKxCNJWInXjRDmR6EN8szV/gAvwEptXnXKq8n
 sANQCBr2A1sDAlxu5onDI6SGEibCZgSsW+EElPyNKjXyIXdATv+ZLSuNCapt2Zg2
 H/KM+CY2hlcl6quWwjEUtPF4Ux0hIv3ePkwDKQicXMgndxL3+aL5L66UHsIovgxW
 o9H2aA6cfOQJuAXAZUvHlsNlefFW5qpFFR8kXiW87Say3+7nijoe5DhH/RBSZN+i
 O0rbxWVa1rW9eYmHuKAPNMR8Lp4FN9OvBo/Yv3UfmMV661vLVLOvTwJI9GZg7v8o
 UPMDhYNgEnRNrWqf7Wkj9ywgvGaO8qggm7gpE2cFD8DGDR7aZQ9goRKpaVSjTNmW
 4staek1u4g7YQ9s2UXxQ0JFc7esMbUbXxv5Bmk+4JPiI3P4gDMTg7jhh5iKDcEs5
 BVUIfdYKF9LInfYT3o9Uvo6TbYeAfwwzOdMFDWa5BjGOCLD9ttOEGtqMD/bkANbn
 YsaD6xKEL+su37CocSPnekgU+IS0uLb15jpa06CmoaALPGAZcRffKMygSHtlyGtR
 pNazlO93tu9JXQcL5B+A
 =p4SP
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...
2014-04-07 10:24:18 -07:00
Linus Torvalds c12e69c6aa Staging driver pull request for 3.15-rc1
Here's the huge drivers/staging/ update for 3.15-rc1.
 
 Loads of cleanup fixes, a few drivers removed, and some new ones added.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlM7BqAACgkQMUfUDdst+ykHUwCguJDlvM7/FGb3QQslAuKN5Np4
 n2YAoJ3C355mo8Wxr/bJah3Jms4f+a7Q
 =4XGY
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the huge drivers/staging/ update for 3.15-rc1.

  Loads of cleanup fixes, a few drivers removed, and some new ones
  added.

  All have been in linux-next for a while"

* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits)
  staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI
  staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig
  staging: comedi: poc: remove obsolete driver
  staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE
  staging: octeon-usb: prevent memory corruption
  staging: usbip: fix line over 80 characters
  staging: usbip: fix quoted string split across lines
  Staging: unisys: Remove RETINT macro
  Staging: unisys: Remove FAIL macro
  Staging: unisys: Remove RETVOID macro
  Staging: unisys: Remove RETPTR macro
  Staging: unisys: Remove RETBOOL macro
  Staging: unisys: Remove FAIL_WPOSTCODE_1 macro
  Staging: unisys: Cleanup macros to get rid of goto statements
  Staging: unisys: include: Remove unused macros from timskmod.h
  staging: dgap: fix the rest of the checkpatch warnings in dgap.c
  Staging: bcm: Remove unnecessary parentheses
  staging: wlags49_h2: Delete unnecessary braces
  staging: wlags49_h2: Do not use assignment in if condition
  staging: wlags49_h2: Enclose macro in a do-while loop
  ...
2014-04-01 16:45:00 -07:00
Paul Gortmaker 3c699105d0 mfd: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:07 +00:00
Sebastian Reichel b2931b98ce mfd: twl4030-madc: Move driver to drivers/iio/adc
This is a driver for an A/D converter, which belongs into
drivers/iio/adc.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18 08:16:20 +00:00
Angelo Compagnucci 2816ac64ac Add support for Microchip Technology's MCP3426/7/8 ADC
This patch extends previous mcp3422 driver to support
missing members of the family, mcp3426/7/8.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16 18:00:34 +00:00
Lars-Peter Clausen bd75afaa31 staging:iio: Move ad799x driver out of staging
The driver is now at a reasonable quality level. Move it out of staging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-16 18:00:34 +00:00
Alexandre Belloni 8f32b6ba56 iio: adc: at91_adc: correct default shtim value
When sample_hold_time is zero (this is the case when DT is not used or if
atmel,adc-sample-hold-time is omitted), then the calculated shtim is large.

Make that 0, which is the default for that register and the ADC will then use a
sane value of 2/ADCCLK or 1/ADCCLK depending on the version.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-15 16:32:44 +00:00
Johannes Thumshirn 35272754e2 iio: adc: Fix build error discovered by 0-day build bot
men_z188_adc needs to include linux/io.h. This fixes a build error
discovered by 0-day buid bot

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-08 21:57:17 -08:00
Alexandre Belloni 467a44b037 iio: adc: at91_adc: Repair broken platform_data support
Trying to use the at91_adc driver while not using device tree is ending up in a
kernel crash:

Unable to handle kernel NULL pointer dereference at virtual address 00000004
[...]
[<c01f3510>] (at91_adc_probe) from [<c0183828>] (platform_drv_probe+0x18/0x48)
[<c0183828>] (platform_drv_probe) from [<c01824a4>] (driver_probe_device+0x100/0x218)
[<c01824a4>] (driver_probe_device) from [<c0182648>] (__driver_attach+0x8c/0x90)
[<c0182648>] (__driver_attach) from [<c0180de4>] (bus_for_each_dev+0x58/0x88)
[<c0180de4>] (bus_for_each_dev) from [<c0181c7c>] (bus_add_driver+0xd4/0x1d4)
[<c0181c7c>] (bus_add_driver) from [<c0182c40>] (driver_register+0x78/0xf4)
[<c0182c40>] (driver_register) from [<c0008998>] (do_one_initcall+0xe8/0x14c)
[<c0008998>] (do_one_initcall) from [<c02f0b50>] (kernel_init_freeable+0xec/0x1b4)
[<c02f0b50>] (kernel_init_freeable) from [<c022acdc>] (kernel_init+0x8/0xe4)
[<c022acdc>] (kernel_init) from [<c0009670>] (ret_from_fork+0x14/0x24)

This is because the at91_adc_caps structure is mandatory but is not filled when
using platform_data. Correct that by using an id_table. It ensues that the
driver will not match "at91_adc" anymore but it was crashing anyway.

Fixes: c46016665f (iio: at91: ADC start-up time calculation changed since at91sam9x5)
Cc: stable@vger.kernel.org # v3.13+

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-06 19:08:12 +00:00
Jonathan Cameron db8fa7311d iio:adc:vf610 ensure correct handing of interruption of wait for completion
Issue highlighted by smatch warning:

CHECK   drivers/iio/adc/vf610_adc.c
drivers/iio/adc/vf610_adc.c:466 vf610_read_raw() warn: unsigned 'ret' is never less than zero.

As wait_for_completion_interruptible_timeout can return -ERESTARTSTSYS, if
interrupted, ret must be signed.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Fugang Duan <B38611@freescale.com>
2014-03-02 21:45:28 +00:00
Lars-Peter Clausen bdc8cda1d0 iio:adc: Add Xilinx XADC driver
The Xilinx XADC is a ADC that can be found in the series 7 FPGAs from Xilinx.
The XADC has a DRP interface for communication. Currently two different
frontends for the DRP interface exist. One that is only available on the ZYNQ
family as a hardmacro in the SoC portion of the ZYNQ. The other one is available
on all series 7 platforms and is a softmacro with a AXI interface. This driver
supports both interfaces and internally has a small abstraction layer that hides
the specifics of these interfaces from the main driver logic.

The ADC has a couple of internal channels which are used for voltage and
temperature monitoring of the FPGA as well as one primary and up to 16 channels
auxiliary channels for measuring external voltages. The external auxiliary
channels can either be directly connected each to one physical pin on the FPGA
or they can make use of an external multiplexer which is responsible for
multiplexing the external signals onto one pair of physical pins.

The voltage and temperature monitoring channels also have an event capability
which allows to generate a interrupt when their value falls below or raises
above a set threshold.

Buffered sampling mode is supported by the driver, but only for AXI-XADC since
the ZYNQ XADC interface does not have capabilities for supporting buffer mode
(no end-of-conversion interrupt). If buffered mode is supported the driver will
register two triggers. One "xadc-samplerate" trigger which will generate samples
with the configured samplerate. And one "xadc-convst" trigger which will
generate one sample each time the CONVST (conversion start) signal is asserted.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-03-01 21:04:29 +00:00
Johannes Thumshirn 74aeac4da6 iio: adc: Add MEN 16z188 ADC driver
Add support for MEN 16z188 ADC IP Core on MCB FPGAs.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:47:57 -08:00
Hartmut Knaack b8a70aef04 iio:max1363 fix typos of int_vref_mv
This patch fixes some typos in max1363_chip_info_tbl[].

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-18 08:44:11 +00:00
Fugang Duan a775427632 iio:adc:imx: add Freescale Vybrid vf610 adc driver
Add Freescale Vybrid vf610 adc driver. The driver only support
ADC software trigger.

VF610 ADC device documentation is available at below reference manual
(chapter 37):
http://cache.freescale.com/files/32bit/doc/ref_manual/VYBRIDRM.pdf?
fpsp=1&WT_TYPE=Reference%20Manuals&WT_VENDOR=FREESCALE&WT_FILE_FORMAT
=pdf&WT_ASSET=Documentation

CC: Shawn Guo <shawn.guo@linaro.org>
CC: Jonathan Cameron <jic23@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: Peter Meerwald <pmeerw@pmeerw.net>
CC: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-15 10:29:11 +00:00
Greg Kroah-Hartman e5b9c05772 First set of new drivers and cleanups for IIO in the 3.15 cycle.
New drivers:
 * si7005 relative humidity and temperature sensor
 * Lite-on ltr501 ambient light and proximity sensor
 
 Cleanups
 * Clean up some dead comments in max1363
 * Drop some obsolete variables in adjd_s311 and tcs3472 left over from
   the introduction of iio_push_to_buffers_with_timestamp.
 * Drop some unneeded linux/init.h includes
 * Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
 * A number of cleanups and fixes for sca3000
 * Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
 * Drop a platform_set_drvdata in viperboard after the only use of it was
   removed during a devm conversion.
 * Add a missing device name for ak8975 to comply with the ABI.
 * Put mpu6050 into the IMU menu as it slipped out into the main menu.
 * Fix a typo and some comment formatting in mpu6050.
 * Document at91 ADC clock properties.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS+R3TAAoJEFSFNJnE9BaILtoP/RiZaeAQe5hKVtS7DBNmtbvH
 NVrk4SDl8F5WH6O6MKvRn54aBWyPj3axyMb0WLv9oGQycxlflT/420Q1UaayG4oX
 W1IOS/X2JNrWpt/xlNPi8crqpcRZbLVjKoRGhw0BMR9OTD+x6U+NTNGpr9WJUNAB
 CjmYpa6MhouQMd59+HMroSf1PIvBfvG2fkAMg2AoRSQ6TU19q5Yi0zzqwS17iZf3
 VTazh63dVKYyt3MJimjnGcA4A2kv5YOrfK59qYfHPIVR4AfKNVKlwVQlu8TlBaXE
 eYr2G1Jbd/GRkUe5FRGL9Nlnl8exnUU8JGCTpeXSJSmDWAe2xVkjTNbDDyrT5Gem
 6c02ms0xYeIxqzYpZVZs8OueuZhs2DztcT0e+p7ByvjBZ+XvMEp9t00DnsV3rSEa
 Y9X1vpeZei5bRW+woKCniEhV/89seUe1ASyj/g8yiPYc5b1mKhcUQKFs1vCToWjV
 v0MEp15569jeqX+6igOAloArxykrdmS4hAeMfyKoijApd97n5hkK2jwjFxRv9rZs
 2Q+2qTDA/3E9+wRjLrx4v+Bu6EKH44K5Z5H5rPmnsgRe8/0UQx4xvhI6Bv2Krx0v
 CKdwNAo6Z5iePAtmaMU46l9h1AygOAzub9V2L36Irxd4BFLLYUj1zSW2hN1zgfCX
 4YTgPtTGZ/lBfNsvBy9b
 =nSiE
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers and cleanups for IIO in the 3.15 cycle.

New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor

Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
  the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
  removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.
2014-02-11 14:12:12 -08:00
Guenter Roeck 55b40d3731 iio: max1363: Use devm_regulator_get_optional for optional regulator
In kernel version 3.13, devm_regulator_get() may return no error
if a regulator is undeclared. regulator_get_voltage() will return
-EINVAL if this happens. This causes the driver to fail loading if
the vref regulator is not declared.

Since vref is optional, call devm_regulator_get_optional instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-08 11:46:00 +00:00
Johannes Thumshirn 97b6ee5253 iio: adc: viperboard: Drop platform_set_drvdata call
Drop call to platform_set_drvdata as driver data is not used anywhere in the
driver

Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-03 19:27:59 +00:00
Linus Torvalds bb1281f2aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science stuff from trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  neighbour.h: fix comment
  sched: Fix warning on make htmldocs caused by wait.h
  slab: struct kmem_cache is protected by slab_mutex
  doc: Fix typo in USB Gadget Documentation
  of/Kconfig: Spelling s/one/once/
  mkregtable: Fix sscanf handling
  lp5523, lp8501: comment improvements
  thermal: rcar: comment spelling
  treewide: fix comments and printk msgs
  IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
  Documentation: update /proc/uptime field description
  Documentation: Fix size parameter for snprintf
  arm: fix comment header and macro name
  asm-generic: uaccess: Spelling s/a ny/any/
  mtd: onenand: fix comment header
  doc: driver-model/platform.txt: fix a typo
  drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
  doc: Fix typo (acces_process_vm -> access_process_vm)
  treewide: Fix typos in printk
  drivers/gpu/drm/qxl/Kconfig: reformat the help text
  ...
2014-01-22 21:21:55 -08:00
Linus Torvalds ac26663572 MFD changes due for the v3.14 merge window
New drivers
  - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger
  - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator
 
 Existing driver adaptions
  - Expansion of Wolfson Arizona DSP and High-Pass filter controls
  - TI TWL6040 default Regmap support and Regcache addition/bypass
  - Some nice Smatch catch fixes
  - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
  - ChromeOS EC timing (delay) adaptions and added dependency on OF
  - Many constifications of 'struct {mfd_cell,regmap_irq,et. al}'
  - Watchdog support added for NVIDIA AS3722
  - Convert functions to static in TI AM335x
  - Realigned previously defeated functionality in TI AM335x
  - IIO ADC-TSC concurrency dead-lock/timeout resolution
  - Addition of Power Management and Clock support for Samsung core
  - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
  - Greater use of irqdomain functionality in ST-E AB8500
  - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
  - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
  - Device Tree documentation added for TI/Nat Semi LP3943
  - Version detection and voltage tables for TI TPS6586x PMIC devices
  - Simplification of Freescale MC13XXX (de-)initialisation routines
  - Clean-up and simplification of the Realtek parent driver
  - Added support for RTL8402 Realtek PCI-Express card reader
  - Resource leak fix for Maxim 77686
  - Possible suspend BUG() fix in OMAP USB TLL
  - Support for new Wolfson WM5110 Revision (D)
  - Testing of automatic assignment of of_node in mfd_add_device()
    - Reversion of the above when it started to cause issues
  - Remove legacy Platform Data from;
               TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
  - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal,
               unused uninitialised warning mitigation, error message clarity,
               removal of redundant/duplicate checks, licensing (GPL -> GPL2),
               coding consistency, duplicate function declaration, ret checks,
               commit corrections, redundant of_match_ptr() helper removal,
               spelling, #if-deffery removal and header guards name changes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIbBAABAgAGBQJS3pLGAAoJEFGvii+H/HdhmkkP93Hrd9FBjVpmUQcOrghFDd//
 vte2LVDovXDcwm7i+BdZNG3+2aWtliTQXIw8PaAziUTwMlDNtT2B6GBFnIff4aXB
 Em/Oh6Je7r1gom1gMPCuefRrInTk0xEXy9Oazp4Hn4in71T+8PHNlEHdxEojakEm
 H5FnjAfgISEsA5twSyO9efVLNqPd3UQqg3O571oKwfuSED70YSCW2Yyaoiz4pnE5
 0WwZ9cel+sP7CIuyuR4TumUSDeBIAnYnZWqjqXZ1ueMWcm2RNVqeFrt/w0uoZjOA
 yBg8ZMfkBcePd6qnifqVqagRW/jW1bxmUeIHkp0bWeMqWN6Yyypitz8ZW+Qi7Swa
 OcmgM9V7OW1WG9FF7HoLbYHIPzmBb6duGtcCfAir4m8HJjyPfTuJpOshBW1F3+VG
 yEf5a1fj2NO34kvIbLec2f7MveIMmZxzWaoOx+ET9/WPknilifgyp7eDH24pQwI4
 5Lo5Z5uAfBCT3roOzHxCLl2nVXQoC66iTwdnneiEOn4rB/ApjfGVvGGd0VT6TD+g
 z3RqxpTdkd0AtjfeF778uTDBEKu7HZkqmlBP8HKWCBEAzqcKg7BpjYw0ajgmVwKr
 QiuBuWcEZ/2vVt8Qot7y5Vx89Q4AQwOqc24SldtQLu46iPAuKt+GizzHRw3IxBiQ
 VU9Aq/VoaTHBLS91tDE=
 =PuTE
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd

Pull MFD changes from Lee Jones:
 "New drivers
   - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
     Battery Charger
   - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
     Generator

  Existing driver adaptions
   - Expansion of Wolfson Arizona DSP and High-Pass filter controls
   - TI TWL6040 default Regmap support and Regcache addition/bypass
   - Some nice Smatch catch fixes
   - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
   - ChromeOS EC timing (delay) adaptions and added dependency on OF
   - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
   - Watchdog support added for NVIDIA AS3722
   - Convert functions to static in TI AM335x
   - Realigned previously defeated functionality in TI AM335x
   - IIO ADC-TSC concurrency dead-lock/timeout resolution
   - Addition of Power Management and Clock support for Samsung core
   - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
   - Greater use of irqdomain functionality in ST-E AB8500
   - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
   - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
   - Device Tree documentation added for TI/Nat Semi LP3943
   - Version detection and voltage tables for TI TPS6586x PMIC devices
   - Simplification of Freescale MC13XXX (de-)initialisation routines
   - Clean-up and simplification of the Realtek parent driver
   - Added support for RTL8402 Realtek PCI-Express card reader
   - Resource leak fix for Maxim 77686
   - Possible suspend BUG() fix in OMAP USB TLL
   - Support for new Wolfson WM5110 Revision (D)
   - Testing of automatic assignment of of_node in mfd_add_device()
   - Reversion of the above when it started to cause issues
   - Remove legacy Platform Data from;
              TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
   - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
              removal, unused uninitialised warning mitigation, error
              message clarity, removal of redundant/duplicate checks,
              licensing (GPL -> GPL2), coding consistency, duplicate
              function declaration, ret checks, commit corrections,
              redundant of_match_ptr() helper removal, spelling,
              #if-deffery removal and header guards name changes"

* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
  mfd: wm5110: Add register patch for rev D chip
  mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
  gpio: lp3943: Remove redundant of_match_ptr helper
  mfd: sta2x11-mfd: Use named constants for pci_power_t values
  Documentation: mfd: Fix LDO index in s2mps11.txt
  mfd: Cleanup mfd-mcp-sa11x0.h header
  mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
  mfd: twl6030: Fix endianness problem in IRQ handler
  mfd: sec-core: Add cells for S5M8767-clocks
  mfd: max14577: Remove redundant of_match_ptr helper
  mfd: twl6040: Fix sparse non static symbol warning
  mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
  mfd: rtsx: Fix sparse non static symbol warning
  mfd: max77693: Set proper maximum register for MUIC regmap
  mfd: max77686: Fix regmap resource leak on driver remove
  mfd: Represent correct filenames in file headers
  mfd: rtsx: Add support for card reader rtl8402
  mfd: rtsx: Add set pull control macro and simplify rtl8411
  mfd: max8997: Enforce mfd_add_devices() return value check
  mfd: mc13xxx: Simplify probe() & remove()
  ...
2014-01-21 10:58:17 -08:00
Lee Jones 28b4c2948f Immutable branch for IIO and Input
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSy79CAAoJEFGvii+H/Hdh3ZcQALTHjbU85CljM+tDsQUC3ugi
 uMQZxf2YEWDmLE1epcGbQ22EVdI2s59jFs8tEUBSOqbUXm+Oyuf8zdjenibnOoht
 epKvlRgUGXZA4A90YsJjVLSkn2Nl/QvyKhjU7n9KTH6rnPFGOw2Ja5n7cLy3DtNY
 vsSwHRtOrV5tWMSJQbGamz9cGujhAli5kHQ+hPUKNeaztSGFbpl02SsV8oJ/Dlbg
 juzjY9QDMnKjiSjA0ZtvUIJoyU5yJuRtrBM02SsvXAVPTZpMEaM5P7dO3lqPSXzK
 jUZuMszrB8gV0NxeSkdiWYUZ89rpoSVYv6EW/pg87OvTxukHyB4oi1+/3YXYdNgj
 8kDVhL/BKPdqLw9vo7WbvnZJz99qNyh7R4ZOf90Yv+3BOAPue0WdDQjZw/5p41Ur
 8+VRc1SvOSzXDuNIon97DmpKk477i3ylMiAeqi+b7ynzgvJqGayFf0KUHlUHmKjM
 ZNKHl2sd9qvft5WUX1P02ihc9/j8LMF5h8WX8Et1/a05SXn1LvfK5HJQk9ZHB94m
 ZaXwEOirbHAVyTlQre1zYncBWtlsLlOJT+c0G+HjFX99+79u0KxFyUTpXgfypJUe
 5UGQjM/w+CcVpl6h58k65PjyGRRweVUkqnoAnOpVGCRvIx4sU1g5nF9usEb8omDA
 PODxF76LVgohEozCwGpq
 =Tc4K
 -----END PGP SIGNATURE-----

Merge tag 'ib-iio-input-3.13-1' into for-mfd-next

Immutable branch for IIO and Input
2014-01-21 08:26:55 +00:00
Paul Gortmaker 36eb8cc2ce iio: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-01-11 11:59:00 +00:00
Vivien Didelot 82b7afbc8a iio:adc:max1363 clear list of missing features
Remove "Control of internal reference" from the list of unimplemented
features, since as of commit a405b00, external reference is supported if
the device has a regulator and falls back to internal if it doesn't.

While we are modifying the header, let's make it more concise and remove
a redundant filename.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-01-11 11:33:36 +00:00
Sebastian Andrzej Siewior 7ca6740cd1 mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization
The ADC driver always programs all possible ADC values and discards
them except for the value IIO asked for. On the am335x-evm the driver
programs four values and it takes 500us to gather them. Reducing the number
of conversations down to the (required) one also reduces the busy loop down
to 125us.

This leads to another error, namely the FIFOCOUNT register is sometimes
(like one out of 10 attempts) not updated in time leading to EBUSY.
The next read has the FIFOCOUNT register updated.
Checking for the ADCSTAT register for being idle isn't a good choice either.
The problem is that if TSC is used at the same time, the HW completes the
conversation for ADC *and* before the driver noticed it, the HW begins to
perform a TSC conversation and so the driver never seen the HW idle. The
next time we would have two values in the FIFO but since the driver reads
everything we always see the current one.
So instead of polling for the IDLE bit in ADCStatus register, we should
check the FIFOCOUNT register. It should be one instead of zero because we
request one value.

This change in turn leads to another error. Sometimes if TSC & ADC are
used together the TSC starts generating interrupts even if nobody
actually touched the touchscreen. The interrupts seem valid because TSC's
FIFO is filled with values for each channel of the TSC. This condition stops
after a few ADC reads but will occur again. Not good.

On top of this (even without the changes I just mentioned) there is a ADC
& TSC lockup condition which was reported to me by Jeff Lance including the
following test case:
A busy loop of "cat /sys/bus/iio/devices/iio\:device0/in_voltage4_raw"
and a mug on touch screen. With this setup, the hardware will lockup after
something between 20 minutes and it could take up to a couple of hours.
During that lockup, the ADCSTAT register says 0x30 (or 0x70) which means
STEP_ID = IDLE and FSM_BUSY = yes. That means the hardware says that it is
idle and busy at the same time which is an invalid condition.

For all this reasons I decided to rework this TSC/ADC part and add a
handshake / synchronization here:
First the ADC signals that it needs the HW and writes a 0 mask into the
SE register. The HW (if active) will complete the current conversation
and become idle. The TSC driver will gather the values from the FIFO
(woken up by an interrupt) and won't "enable" another conversation.
Instead it will wake up the ADC driver which is already waiting. The ADC
driver will start "its" conversation and once it is done, it will
enable the TSC steps so the TSC will work again.

After this rework I haven't observed the lockup so far. Plus the busy
loop has been reduced from 500us to 125us.

The continues-read mode remains unchanged.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-07 08:45:00 +00:00
Sebastian Andrzej Siewior 3954b7bfc6 mfd: ti_am335x: Drop am335x_tsc_se_update() from resume path
The update of the SE register in MFD doesn't look right as it has
nothing to do with it. The better place to do it is in TSC driver (which
is already doing it) and in the ADC driver which needs this only in the
continues mode.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-07 08:42:38 +00:00
Sebastian Andrzej Siewior 7e170c6e4f mfd: ti_am335x_tscadc: Don't read back REG_SE
The purpose of reg_se_cache has been defeated. It should avoid the
read-back of the register to avoid the latency and the fact that the
bits are reset to 0 after the individual conversation took place.

The reason why this is required like this to work, is that read-back of
the register removes the bits of the ADC so they do not start another
conversation after the register is re-written from the TSC side for the
update.
To avoid the not required read-back I introduce a "set once" variant which
does not update the cache mask. After the conversation completes, the
bit is removed from the SE register anyway and we don't plan a new
conversation "any time soon". The current set function is renamed to
set_cache to distinguish the two operations.
This is a small preparation for a larger sync-rework.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-07 08:41:15 +00:00
Sebastian Andrzej Siewior fb7f8ce3bc iio: ti_am335x_adc: Adjust the closing bracket in tiadc_read_raw()
It somehow looks like the ending bracket belongs to the if statement but
it does belong to the while loop. This patch moves the bracket where it
belongs.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-07 08:37:18 +00:00
Greg Kroah-Hartman a6e8e3a470 2nd round of new IIO drivers, features and cleanups for the 3.14 cycle.
New drivers
 
 * HID inclinometer driver.
 
 * DHT11 humidity driver.  Note that previous humidity drivers have been in
   hwmon, but no one was ever entirely happy with that, and they should find
   a more comfortable home in IIO (their original placement in hwmon was my
   fault - oops).  As this is our first humidity driver, core support is also
   added.
 
 New features
 
 * Two of mxs-lradc channels are internally wired to a temperature sensor,
   make this explicit in the driver by providing the relevant temperature
   channel.
 
 * Add support for blocking IO on buffers.
 
 * Add a data_available call back to the interface between buffer implementations
   and the core.  This is much cleaner than the old, 'stufftoread' flag.
   Implemented in the kfifo buffer.
 
 Cleanups
 
 * Last user of the old event configuration interface is converted and the
   old interface dropped.  Nice to be rid of this thanks to Lars-Peter's hard
   work!
 
 * Replace all remaining instances of the IIO_ST macro with explicit filling
   of the scan_type structure within struct iio_chan_spec.  This macro was a
   bad idea, that rapidly ceased to cover all elements of the structure.
   Miss reading of the macro arguements has led to a number of bugs so lets
   just get rid of it. The final removal patch is awaiting for some fixes
   to make their way into mainline.
   In a couple of drivers, no elements of scan_type were even being used so
   in those case, it has been dropped entirely.
 
 * Drop a couple of of_match_ptr helper uses in drivers where devicetree is
   not optional and hence the structures being protected by this always exist.
 
 * Fix up some cases where data was read from a device in a particular
   byte order, but he code placed it into a s16 or similar.  These were
   highlighted by Sparse.
 
 * Use the new ATTRIBUTE_GROUPS macro to drop some boiler plate in the triggers
   core code.
 
 * ad7746 and ad7280a - stop storing buffers on the stack, giving cleaner code
   and possibly avoiding issues with i2c bus drivers that assume they can dma
   directly into the buffer.  Note that this cannot currently happen as the the
   i2c_smbus_read_i2c_block_data function has a memcpy from the buffer actually
   passed to the bus driver.  I missed this element of the commit message
   and don't think it is major enough to rebase the iio tree.
 
 * ad5791 and ad5504 stop storing buffers on the stack for an SPI driver.
   Unlike the i2c drivers, this is a real issue for SPI drivers which can dma
   directly into the buffer supplied.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJStyIbAAoJEFSFNJnE9BaI1goQAL0hKYCYuIl3d1fAy65u2I4h
 5mzJs/oJmomq/4BqAopfEQ8CbhZhksAYoR4JndOzZH7n4jVY/fRgyY/bH/Ymj0oI
 OpCtfee6IeeBLA0p8CMeEPem/pnwxRhSDzul9jsiwpTrTRKAIC1BPZwrmLpaoUfc
 obD8r1ocVZStzfsYBr3DUwkcIpcTQTCVy/Pl8HoKLKKsdYoFhTpNwEHJFOoZdiFi
 KKGRkeL9Q8VRWt/otWU0L0VFGZFwI1PWlxrqnbisVcGwSs8FF4wGcQvijfC0mUMg
 BdKDM7J4GrourZhj3og566B/8WMtGo6YTJXAe/QvvPp768rQncccDHem4V0Tnu49
 OJbjgD4ZGVXt3uBFaYddBIbMEIB8SfA2VYur/MW3gnZ7saSAtDk6TllsvC6CxIkR
 +LOOxWylhEGeJFIjyMrFPqRVhrrRNkuDRxPz8ZGTiDc8ovo6DWuTLsJrLSX8EJyZ
 O6TN6EEk8TCJaf8V63uTFW0Dlom4IQHyQei6LKhfhzwUQq/ri0esBp5P8lGzI3Uq
 wtOSdCDuYyoUEYPYbwjohFmQJ27w1rx9KcS4Y9BGmhTIRXslUg3hr+wA/gKMSDZ0
 /AUkLQajcv9otupfGzsp5mIWkthKKsGt/Y50xc5zIodnFtnM3nQGq4AqlP6t8nzP
 jucVwVMQLj5KaNH13P6K
 =Whfv
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO drivers, features and cleanups for the 3.14 cycle.

New drivers

* HID inclinometer driver.

* DHT11 humidity driver.  Note that previous humidity drivers have been in
  hwmon, but no one was ever entirely happy with that, and they should find
  a more comfortable home in IIO (their original placement in hwmon was my
  fault - oops).  As this is our first humidity driver, core support is also
  added.

New features

* Two of mxs-lradc channels are internally wired to a temperature sensor,
  make this explicit in the driver by providing the relevant temperature
  channel.

* Add support for blocking IO on buffers.

* Add a data_available call back to the interface between buffer implementations
  and the core.  This is much cleaner than the old, 'stufftoread' flag.
  Implemented in the kfifo buffer.

Cleanups

* Last user of the old event configuration interface is converted and the
  old interface dropped.  Nice to be rid of this thanks to Lars-Peter's hard
  work!

* Replace all remaining instances of the IIO_ST macro with explicit filling
  of the scan_type structure within struct iio_chan_spec.  This macro was a
  bad idea, that rapidly ceased to cover all elements of the structure.
  Miss reading of the macro arguements has led to a number of bugs so lets
  just get rid of it. The final removal patch is awaiting for some fixes
  to make their way into mainline.
  In a couple of drivers, no elements of scan_type were even being used so
  in those case, it has been dropped entirely.

* Drop a couple of of_match_ptr helper uses in drivers where devicetree is
  not optional and hence the structures being protected by this always exist.

* Fix up some cases where data was read from a device in a particular
  byte order, but he code placed it into a s16 or similar.  These were
  highlighted by Sparse.

* Use the new ATTRIBUTE_GROUPS macro to drop some boiler plate in the triggers
  core code.

* ad7746 and ad7280a - stop storing buffers on the stack, giving cleaner code
  and possibly avoiding issues with i2c bus drivers that assume they can dma
  directly into the buffer.  Note that this cannot currently happen as the the
  i2c_smbus_read_i2c_block_data function has a memcpy from the buffer actually
  passed to the bus driver.  I missed this element of the commit message
  and don't think it is major enough to rebase the iio tree.

* ad5791 and ad5504 stop storing buffers on the stack for an SPI driver.
  Unlike the i2c drivers, this is a real issue for SPI drivers which can dma
  directly into the buffer supplied.
2013-12-24 10:30:57 -08:00
Greg Kroah-Hartman 912cbd4952 Merge 3.13-rc5 into staging-next
This resolves a merge issue with drivers/staging/imx-drm/imx-drm-core.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24 10:06:37 -08:00
Masanari Iida 77d84ff87e treewide: Fix typos in printk
Correct spelling typo in various part of kernel

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19 15:10:49 +01:00
Jonathan Cameron e39d99059a iio:adc:ad7887 Fix channel reported endianness from cpu to big endian
Note this also sets the endianness to big endian whereas it would
previously have defaulted to the cpu endian.  Hence technically
this is a bug fix on LE platforms.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
2013-12-17 20:37:14 +00:00
Lars-Peter Clausen cb955852a4 iio: Remove support for the legacy event config interface
Now that all drivers have been converted to the new event config interface we
can remove for the legacy event config interface. Also drop the '_new' suffix
for the event config interface callbacks, since those are the only callbacks
now.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-08 13:13:52 +00:00
Lars-Peter Clausen 54e018da31 iio:ad7266: Mark transfer buffer as __be16
Fixes the following warnings from sparse:
	drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
	drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
	drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16
	drivers/iio/adc/ad7266.c:140:16: warning: cast to restricted __be16

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03 20:22:27 +00:00
Greg Kroah-Hartman 06749f192b Merge v3.13-rc2 into staging-next
we want these fixes in here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-02 16:39:07 -08:00
Greg Kroah-Hartman 3ce5ae8d46 First set of new features, drivers and cleanups for IIO in the 3.14 cycle.
This mostly consists of patches that didn't quite make the last cycle. Lots
 of interesting things under review currently.
 
 Core:
 - Add devm_iio_device_register/unregister.  I took some convincing on whether
   there would be many devices that really were simple enough to need no
   explicit actions on removal.  Turns out there are some.
 - Move some stray docs to above the relevant implemenation.
 - Drop a redundant repeated check on the fact the trigger has actually changed
   when there is a userspace attempt change it.
 
 Drivers:
 New drivers
 - Freescale MPL3115A2 Pressure / temperature sensor
 
 New functionality
 - hid_sensors: add sensitivity support.
 
 DT bindings
 - tsl2563
 - hmc5843
 
 Cleanups
 - Drop unused scan_type from viperboard adc driver.
 - devm_iio_device_register used in viperboard, ad5421, ad5755, adis16130,
   adxrs450, vcnl4000, adis16220, ad7816, lpc32xx, adt7316, adis16060, isl29018
   and ad2s1200.  Note that this was proposed in a number of other drivers
   and this revealed a number of missorderings in remove functions.  Also for
   now I have blocked this on any device that any hardware suspend suport on
   the basis that we probably want to power down devices if they have no driver
   support loaded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSk7pfAAoJEFSFNJnE9BaINEAP/2LKNkK/65BI8DOb3DQcRQWw
 yQAjYd43c7OWTW6clx3DRZiESI1qR7B1LeIV3P+jF1kvOS5qdE1WfYI9pQCLW+JL
 yRQgqLJknuHnrs+Bzw5CrGRcPDl5Zk31megcs0CcOt76LbQsaQ+w/blq9EiuVioW
 s2HfopsbVPQBe/IRA5ajLRG5gQYR4FIEIdzifzmv3Zydzhg9yFy5sk6vpSnzN6zM
 bh1Q8OooMDCqrCsKwzG1z5ZT4ki6oEILVQsiCblI9kcbw+GyKb95d63E0ZdlH72o
 ymowmRGujB+gS1zBh+1zLVjuaUytLHBUxAcQIFYwpOtbqaAYo68J5HFEyXWh5QpH
 aeMWnN4Cd54h83SsBofF05aFPGGK3iM6rioDpPJaLjBzJgFuRvIV87O3t0j1/3/Q
 VfXKYboGH4EVHsbARoUaQ4UP/0WlXoDQwX5XfBbsSlL9/U58JmrKAx6+HvmSyvcG
 5HKzOsVQNKbZMrSlBlvFzPXtRdJwRuv9TwWLLUatQKZAt66rdBgWcycOvlQv1m/9
 Neo/2b22vqoAN1AfyW32Hz7rQCnKxVczbTdex9I5ikNJmIPUfbZ6TAE/660HSVE2
 J70ZA6SHGU9Edhm0fkJNBhRanO3my4vQFUwcl457JY9O/BeC0xBhU1ZjvkFGysG0
 D/9TEiSaLoURkhxeeN0M
 =KZou
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new features, drivers and cleanups for IIO in the 3.14 cycle.
This mostly consists of patches that didn't quite make the last cycle. Lots
of interesting things under review currently.

Core:
- Add devm_iio_device_register/unregister.  I took some convincing on whether
  there would be many devices that really were simple enough to need no
  explicit actions on removal.  Turns out there are some.
- Move some stray docs to above the relevant implemenation.
- Drop a redundant repeated check on the fact the trigger has actually changed
  when there is a userspace attempt change it.

Drivers:
New drivers
- Freescale MPL3115A2 Pressure / temperature sensor

New functionality
- hid_sensors: add sensitivity support.

DT bindings
- tsl2563
- hmc5843

Cleanups
- Drop unused scan_type from viperboard adc driver.
- devm_iio_device_register used in viperboard, ad5421, ad5755, adis16130,
  adxrs450, vcnl4000, adis16220, ad7816, lpc32xx, adt7316, adis16060, isl29018
  and ad2s1200.  Note that this was proposed in a number of other drivers
  and this revealed a number of missorderings in remove functions.  Also for
  now I have blocked this on any device that any hardware suspend suport on
  the basis that we probably want to power down devices if they have no driver
  support loaded.
2013-11-25 18:42:40 -08:00
Greg Kroah-Hartman 1676587bca First round of fixes for IIO in the 3.13 cycle.
The usual mixed bag of fixes.
 
 * 3 cases where kconfig dependencies were missing.  We need to keep a closer
   eye on this in new drivers.
 
 * hid_sensors was abusing the iio_dev->trigger pointer.  We had a round
   of clearing this out some time ago but this driver clearly slipped through.
 
 * A misuse of the IIO_ST macro, in mcp3422, which we should really make a
   concertive effort to finish removing.
 
 * Avoid a double free introduced by recent buffer reference counting in the
   one driver that (quite reasonably!) does things differently (am335x)
 
 * A missing mutex_unlock in kxsd9 that means that driver has been non
   functional for some time and no one noticed (including me who for once
   actually has one of the supported devices).
 
 * An incorrect assumption about the parameters of sign_extend32 in mcp3422.
 
 So nothing controversial.  The only substantial patch is the hid_sensors
 one and that is actually just adding a new pointer to the devices private
 state then moving the code over to it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSk7SvAAoJEFSFNJnE9BaIRNsQAJnM/WiH1ghfA5nuc0V7JrnB
 2Z6Qtm3Stoq4Ul5LYiEMxumo6ckL17YFddxejUF9X4Eq5N8YyAxdPd8JdDJgS2OL
 yCM2x6izd9drIGA3YUMMOvZ1BScSK1e5DmXJHp4nuF68uHtf2TM4TGF/2zuqt3TN
 2bL7blNF3/5O/TiBRB4XjkH4Sy5c4G2kke+0SckRnWohTn8oE7tWihr84nYPciqt
 mu11Nrv9S+sr/5GzRwN8d5SU33yU2/ML32QU/4oQzb/XxBW0W759NJflqY5sSZ89
 JQnHcCKKZD7IWBFT0VAMiuEjBpSRGc4vxBbYjsVHtEHzW7v3L0fvob5YqfSrzMlD
 rVUiTQJm7fC/4hn7iJUPrxkWsSGsjCvVrLZmZFOK3OYONUfd+Cqg0nliihRZo65s
 054/yi4v8xd6OUzqSxtWKIK/ZQjDxa5W2BlRoryShCrUAo/e3Djy+jH32v4Mmgfe
 D9aEwdUqa8kPlq6pyQC2QRgWWU1K5+RRrzW5nNNLlmjYtVlfF+8OgcQYGHW8iMur
 8AaDXNZwQLEYA4409T/Ar9lNg4gDqc0YZsvNibu0q4Kxfp13dJOwra+xmF+ktECr
 KcIFxu5v89SgpE1Rra74OXYFWQ1I4Qy+sJxhQKymthPzmw4nuUidK33mxjtcojwz
 TvQJu8f3us8Ea5vQLZo0
 =cIMc
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-3.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First round of fixes for IIO in the 3.13 cycle.

The usual mixed bag of fixes.

* 3 cases where kconfig dependencies were missing.  We need to keep a closer
  eye on this in new drivers.

* hid_sensors was abusing the iio_dev->trigger pointer.  We had a round
  of clearing this out some time ago but this driver clearly slipped through.

* A misuse of the IIO_ST macro, in mcp3422, which we should really make a
  concertive effort to finish removing.

* Avoid a double free introduced by recent buffer reference counting in the
  one driver that (quite reasonably!) does things differently (am335x)

* A missing mutex_unlock in kxsd9 that means that driver has been non
  functional for some time and no one noticed (including me who for once
  actually has one of the supported devices).

* An incorrect assumption about the parameters of sign_extend32 in mcp3422.

So nothing controversial.  The only substantial patch is the hid_sensors
one and that is actually just adding a new pointer to the devices private
state then moving the code over to it.
2013-11-25 12:50:11 -08:00
Sachin Kamat 2191d0fba7 iio: adc: viperboard: Use devm_iio_device_register
devm_iio_device_register simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:15 +00:00
Sachin Kamat 2842d4cc72 iio: adc: mcp3422: Use devm_iio_device_register
devm_iio_device_register simplifies the code.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-24 21:07:12 +00:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Peter Meerwald f227c13259 iio: Drop scan_type from viperboard adc driver
the driver does not support buffering, hence scan_type is not needed

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-09 13:51:23 +00:00
Lars-Peter Clausen fe26980e03 iio: adc: ti_am335x_adc: avoid double free of buffer.
The driver is missing the iio_buffer_attach() call. As such it will attempt
to free the buffer twice on removal.

Introduced in commit 9e69c9 ("iio: Add reference counting for buffers").

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-09 12:33:24 +00:00
Peter Meerwald a5a3e43111 iio: Fix sign extension table in mcp3422 driver
the index argument to sign_extend32() gives the bit position (from 0)
to the sign bit

so e.g. if the measurement has 16-bit resolution, we need to pass 15;
a measurement of 0x8000 should be reported as -32768, not 32768

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-05 22:45:25 +00:00
Wei Yongjun 00582bf8e7 iio: at91: fix error return code in at91_adc_probe()
Fix to return -ENODEV instead of 0 if non-TSMR adc don't
support, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-02 12:07:54 +00:00
Sachin Kamat ae0f29d159 iio: adc: twl6030-gpadc: Remove redundant code
The if check is redundant as the value obtained from
iio_device_register() is already in the required format.
Hence return the function directly.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-24 14:45:09 +01:00
Sachin Kamat de06b344ac iio: adc: ti_am335x_adc: Remove redundant of_match_ptr
ti_adc_dt_ids is always compiled in. Hence of_match_ptr is not
needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-23 17:52:25 +01:00
Sachin Kamat d453a4ab11 iio: adc: nau7802: Remove redundant of_match_ptr
nau7802_dt_ids is always compiled in. Hence of_match_ptr is not
needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-23 17:52:25 +01:00
Sachin Kamat fc21acc471 iio: adc: twl6030-gpadc: Remove redundant of_match_ptr
of_twl6030_match_tbl is always compiled in. Hence of_match_ptr is
not necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-23 17:51:24 +01:00
Vivien Didelot 61bdda6922 iio:adc:max1363 support SMBus for 8-bit devices
The driver currently supports only I2C access. But supported devices with an
accuracy of 8-bit are compatible with the SMBus byte access routines.

This patch wraps the send and receive routines depending on the chip
accuracy and fonctionnalities of its adapter.

For instance, this allows us to use a MAX11603 on a ICH7 controller.

This patch also simplifies the max1363_write_basic_config() routine to
use the struct max1363_state fields directly.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-20 22:36:21 +01:00
Sachin Kamat 1f100e80bb iio: adc: ti-adc081c: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-18 20:05:56 +01:00
Sachin Kamat 62ba493ea4 iio: adc: nau7802: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-18 20:05:56 +01:00
Sachin Kamat de36d817b4 iio: adc: mcp3422: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-18 20:05:56 +01:00
Josh Wu c8b11de040 iio: at91: introduce touch screen support in iio adc driver
AT91 ADC hardware integrate touch screen support. So this patch add touch
screen support for at91 adc iio driver.
To enable touch screen support in adc, you need to add the dt parameters:
  1. which type of touch are used? (4 or 5 wires), sample period time.
  2. correct pressure detect threshold value.

In the meantime, since touch screen will use a interal period trigger of adc,
so it is conflict to other hardware triggers. Driver will disable the hardware
trigger support if touch screen is enabled.

This driver has been tested in AT91SAM9X5-EK and SAMA5D3x-EK.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-17 23:57:10 +01:00
Lars-Peter Clausen 24adaf7958 iio:ti_am335x: Remove redundant call to iio_sw_buffer_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer
core, so there is no need to do this from the driver anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16 19:12:46 +01:00
Lars-Peter Clausen eddcee851a iio:ad_sigma_delta: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16 19:12:40 +01:00
Lars-Peter Clausen 41288e0f62 iio:ad7887: Remove redundant call to iio_sw_buffer_preenable().
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16 19:12:04 +01:00
Lars-Peter Clausen 06e1b542bb iio:ad7266: Remove redundant call to iio_sw_preenable()
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core,
so there is no need to do this from the driver anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16 19:11:31 +01:00
Lars-Peter Clausen e4ec84f83d iio:max1363: Switch to new event config interface
Switch the max1363 driver to the new IIO event config interface as the old one
is going to be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-12 12:33:59 +01:00
Josh Wu 2b6d598bc9 iio: at91: move the num_channels from DT to driver itself
CC: devicetree@vger.kernel.org
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-09 21:15:39 +01:00
Josh Wu c46016665f iio: at91: ADC start-up time calculation changed since at91sam9x5
Since in at91sam9x5, sama5d3x chip. the start up time calucation is changed.
This patch can choose different start up time calculation formula for different
chips.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-09 21:15:32 +01:00
Lars-Peter Clausen b2171677cb iio:max1363: Report scale as fractional value
Move the complexity of calculating the fixed point scale to the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01 16:19:12 +01:00
Lars-Peter Clausen c45e561ee8 iio:at91: Report scale as fractional value
Move the complexity of calculating the fixed point scale to the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01 16:19:12 +01:00
Lars-Peter Clausen 488a21827a iio:ad7791: Report scale as fractional value
Move the complexity of calculating the fixed point scale to the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01 16:19:12 +01:00
Lars-Peter Clausen d88c89db9a iio:ad7476: Report scale as fractional value
Move the complexity of calculating the fixed point scale to the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01 16:19:12 +01:00
Lars-Peter Clausen 2ebc39c0bb iio:ad7266: Report scale as fractional value
Move the complexity of calculating the fixed point scale to the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-01 16:19:12 +01:00
Greg Kroah-Hartman b4e8459947 Second set of new functionality for IIO in the 3.13 cycle - with bug fixes for first set.
This is a small, mainly to get a couple of compile bug related fixes into
 the tree ASAP.
 
 New device support:
 1) Add ad5446 dac support to the ad5641 driver.
 
 New functionality and cleanups:
 1) Optional power supply regulators for the st pressure sensors drivers using
    the new optional regulator interface.
 2) Bit of tidying up of naming in the sysfs trigger.
 
 Bug fixes from the previous series:
 1) Missing select IIO_BUFFER for ti_am335x_adc
 2) Drop a bonus bracket in iio-trig-bfin-timmer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.21 (GNU/Linux)
 
 iQIcBAABAgAGBQJSSJGeAAoJEFSFNJnE9BaIY7gP/i5Ld5glnnG88dtM5g7Cs7Ws
 utyKeWh1QxfbtRH8MDo8GfxKAszVeckG552A/iOfm0wvqJT1JIKRdUl2rMcFvfBS
 V0YFMKlJlXgfVhvy4X9NgfllrlGxAniFQ115l3JnPPhnEfr4IgWOt1K5dmK0kqhF
 Ztt9ukmsa2VctefYP5tcRh1Pw1rYdFndgkdZ64+fYjkAideMbWxgQdh91al1prBz
 wXTu43djnQimvkZLRQ0tX0/WQ9zs8H3bNm7TEgOqU8bbX785B8XQv6N6OFnqXT9S
 IjbZHniih8eU13gtno+yBR6OO0gYw20IxXmVRUUR/F94JT4KXaByGBrMz8Z5f+o0
 OilkJjOdn/jH+Dd1XHJN7Pk8Wx6PxwxeENu3qVn7p1vg27OcpY0Ft2vcdecnE11j
 7bP3HYLcxGxLCW0qYs6voK2SnvZAJBrw8MB4sdUAmykdn1xJ25wccQm6iMKTvTYI
 +AipHI3jpfllIC6Lj1IVhksAYhd7BlMK5sVH0sgWirLbqACSweRpbXCcRlSvguGY
 jEX5+Rf29QfYbcIsRlk52+n47FpVVOfIDjc0ygBGLovaE+FLorWUNIJjeM3f570D
 l2nwWjHUvnNFtA/NnBf4NLrwHqXzBX30Httk+6eISRJiyjr4ZEBAVpRt/luiWlqY
 bOEBICwy1sEzF4ymIAIa
 =KKlS
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new functionality for IIO in the 3.13 cycle - with bug fixes for first set.

This is a small, mainly to get a couple of compile bug related fixes into
the tree ASAP.

New device support:
1) Add ad5446 dac support to the ad5641 driver.

New functionality and cleanups:
1) Optional power supply regulators for the st pressure sensors drivers using
   the new optional regulator interface.
2) Bit of tidying up of naming in the sysfs trigger.

Bug fixes from the previous series:
1) Missing select IIO_BUFFER for ti_am335x_adc
2) Drop a bonus bracket in iio-trig-bfin-timmer
2013-09-29 13:12:23 -07:00
Jonathan Cameron 09f33c3320 iio:ti_am335x_adc ensure that IIO_KFIFO_BUF is not selected witout IIO_BUFFER
This avoids build problems such iio_push_to_buffers* not being defined.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
2013-09-28 11:36:29 +01:00
Greg Kroah-Hartman e2aad1d571 Merge 3.12-rc2 into staging-next.
This resolves the merge problem with two iio drivers that Stephen
Rothwell pointed out.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25 08:59:04 -07:00
Zubair Lutfullah 074b6a8d9d iio: ti_am335x_adc: cleanup error case
Driver is functional without this error case. Cleaned up.

Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-22 19:02:48 +01:00
Zubair Lutfullah a77d020912 iio: ti_am335x_adc: cleanup trigger related code
Trigger related headers and variables are not needed
as driver is now based on INDIO_BUFFER_HARDWARE mode

Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-22 19:02:48 +01:00
Zubair Lutfullah 98c08cf4e3 iio: ti_am335x_adc: fix static in function header
Static is missing in function header. Corrected.

Signed-off-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-22 19:01:12 +01:00
Lars-Peter Clausen d49d95c25d iio:max1363: Use iio_push_to_buffers_with_timestamp()
Makes the code a bit shorter and less ugly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21 19:23:55 +01:00
Lars-Peter Clausen e79cece0dc iio:at91_adc: Use iio_push_to_buffers_with_timestamp()
Makes the code a bit shorter and less ugly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21 19:23:55 +01:00