The current code only calls adjust_jiffies_till_sched_qs() if
jiffies_till_sched_qs is left at its default value, so when the
jiffies_till_sched_qs kernel-boot parameter actually is specified,
jiffies_to_sched_qs will be left with the value zero, which
will result in useless slowdowns of cond_resched(). This commit
therefore changes rcu_init_geometry() to unconditionally invoke
adjust_jiffies_till_sched_qs(), which ensures that jiffies_to_sched_qs
will be initialized in all cases, thus maintaining good cond_resched()
performance.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The current rcu_gp_kthread_wake() function uses in_interrupt()
and thus does a self-wakeup from all interrupt contexts, including
the pointless case where the GP kthread happens to be running with
bottom halves disabled, along with the impossible case where the GP
kthread is running within an NMI handler (you are not supposed to invoke
rcu_gp_kthread_wake() from within an NMI handler. This commit therefore
replaces the in_interrupt() with in_irq(), so that the self-wakeups
happen only from handlers for hardware interrupts and softirqs.
This also makes the code match the comment.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This commit prints a console message when cpulist_parse() reports a
bad list of CPUs, and sets all CPUs' bits in that case. The reason for
setting all CPUs' bits is that this is the safe(r) choice for real-time
workloads, which would normally be the ones using the rcu_nocbs= kernel
boot parameter. Either way, later RCU console log messages list the
actual set of CPUs whose RCU callbacks will be offloaded.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, the rcu_nocbs= kernel boot parameter requires that a specific
list of CPUs be specified, and has no way to say "all of them".
As noted by user RavFX in a comment to Phoronix topic 1002538, this
is an inconvenient side effect of the removal of the RCU_NOCB_CPU_ALL
Kconfig option. This commit therefore enables the rcu_nocbs= kernel boot
parameter to be given the string "all", as in "rcu_nocbs=all" to specify
that all CPUs on the system are to have their RCU callbacks offloaded.
Another approach would be to make cpulist_parse() check for "all", but
there are uses of cpulist_parse() that do other checking, which could
conflict with an "all". This commit therefore focuses on the specific
use of cpulist_parse() in rcu_nocb_setup().
Just a note to other people who would like changes to Linux-kernel RCU:
If you send your requests to me directly, they might get fixed somewhat
faster. RavFX's comment was posted on January 22, 2018 and I first saw
it on March 5, 2019. And the only reason that I found it -at- -all- was
that I was looking for projects using RCU, and my search engine showed
me that Phoronix comment quite by accident. Your choice, though! ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
As the result of recent addition of "rdp->core_needs_qs = false;" in
the "if" block, now both branches of the if-else have the same
assignment.
Factor it out and reduce line count.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The rcutree.kthread_prio kernel-boot parameter is used to set the
priority for boost (rcub), per-CPU (rcuc), and grace-period (rcu_preempt
or rcu_sched) kthreads. It is also used by rcutorture to check whether
it is possible to meaningfully test RCU priority boosting. However,
all of these cases will either ignore or be confused by any post-boot
changes to rcutree.kthread_prio.
Note that the user really can change the priorities of all of these
kthreads using chrt, given sufficient privileges. Therefore, the
read-write nature of sysfs access to rcutree.kthread_prio is thus at
best an attractive nuisance.
This commit therefore changes sysfs access to rcutree.kthread_prio to
be read-only.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The purpose of exit_rcu() is to handle cases where buggy code causes a
task to exit within an RCU read-side critical section. It currently
does that in the case where said RCU read-side critical section was
preempted at least once, but fails to handle cases where preemption did
not occur. This case needs to be handled because otherwise the final
context switch away from the exiting task will incorrectly behave as if
task exit were instead a preemption of an RCU read-side critical section,
and will therefore queue the exiting task. The exiting task will have
exited, and thus won't ever execute rcu_read_unlock(), which means that
it will remain queued forever, blocking all subsequent grace periods,
and eventually resulting in OOM.
Although this is arguably better than letting grace periods proceed
and having a later rcu_read_unlock() access the now-freed task
structure that once belonged to the exiting tasks, it would obviously
be better to correctly handle this case. This commit therefore sets
->rcu_read_lock_nesting to 1 in that case, so that the subsequence call
to __rcu_read_unlock() causes the exiting task to exit its dangling RCU
read-side critical section.
Note that deferred quiescent states need not be considered. The reason
is that removing the task from the ->blkd_tasks[] list in the call to
rcu_preempt_deferred_qs() handles the per-task component of any deferred
quiescent state, and all other components of any deferred quiescent state
are associated with the CPU, which isn't going anywhere until some later
CPU-hotplug operation, which will report any remaining deferred quiescent
states from within the rcu_report_dead() function.
Note also that negative values of ->rcu_read_lock_nesting need not be
considered. First, these won't show up in exit_rcu() unless there is
a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets
the state so that the RCU read-side critical section will be exited
normally.
Again, this code has no effect unless there has been some prior bug
that prevents a task from leaving an RCU read-side critical section
before exiting. Furthermore, there have been no reports of the bug
fixed by this commit appearing in production. This commit is therefore
absolutely -not- recommended for backporting to -stable.
Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in>
Reported-by: Aravinda Prasad <aravinda@iisc.ac.in>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
The rcu_qs is disabling IRQs by self so no need to do the same in raise_softirq
but instead we can save some cycles using raise_softirq_irqoff directly.
CC: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
When there are no callbacks pending on an idle system, I noticed that
RCU softirq is continuously firing. During this the cpu_no_qs is set to
false, and core_needs_qs is set to true indefinitely. This causes
rcu_process_callbacks to be repeatedly called, even though the node
corresponding to the CPU has that CPU's mask bit cleared and the system
is idle. I believe the race is when such mask clearing is done during
idle CPU scan of the quiescent state forcing stage in the kthread
instead of the softirq. Since the rnp mask is cleared, but the flags on
the CPU's rdp are not cleared, the CPU thinks it still needs to report
to core RCU.
Cure this by clearing the core_needs_qs flag when the CPU detects that
its node is already updated which will avoid the unwanted softirq raises
to the benefit of real-time systems.
Test: Ran rcutorture for various tree RCU configs.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_pm_notify() function refuses to switch to/from expedited grace
periods on systems with more than 256 CPUs due to the serialized
initialization of expedited grace periods. However, expedited grace
periods are now initialized in parallel, removing this concern.
This commit therefore removes the checks from rcu_pm_notify(), so that
expedited grace periods are used unconditionally during suspend/resume
and hibernate/wake operations.
As always, real-time workloads wishing to completely avoid expedited
grace periods can use the rcupdate.rcu_normal= kernel parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Pull perf updates from Ingo Molnar:
"Lots of tooling updates - too many to list, here's a few highlights:
- Various subcommand updates to 'perf trace', 'perf report', 'perf
record', 'perf annotate', 'perf script', 'perf test', etc.
- CPU and NUMA topology and affinity handling improvements,
- HW tracing and HW support updates:
- Intel PT updates
- ARM CoreSight updates
- vendor HW event updates
- BPF updates
- Tons of infrastructure updates, both on the build system and the
library support side
- Documentation updates.
- ... and lots of other changes, see the changelog for details.
Kernel side updates:
- Tighten up kprobes blacklist handling, reduce the number of places
where developers can install a kprobe and hang/crash the system.
- Fix/enhance vma address filter handling.
- Various PMU driver updates, small fixes and additions.
- refcount_t conversions
- BPF updates
- error code propagation enhancements
- misc other changes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits)
perf script python: Add Python3 support to syscall-counts-by-pid.py
perf script python: Add Python3 support to syscall-counts.py
perf script python: Add Python3 support to stat-cpi.py
perf script python: Add Python3 support to stackcollapse.py
perf script python: Add Python3 support to sctop.py
perf script python: Add Python3 support to powerpc-hcalls.py
perf script python: Add Python3 support to net_dropmonitor.py
perf script python: Add Python3 support to mem-phys-addr.py
perf script python: Add Python3 support to failed-syscalls-by-pid.py
perf script python: Add Python3 support to netdev-times.py
perf tools: Add perf_exe() helper to find perf binary
perf script: Handle missing fields with -F +..
perf data: Add perf_data__open_dir_data function
perf data: Add perf_data__(create_dir|close_dir) functions
perf data: Fail check_backup in case of error
perf data: Make check_backup work over directories
perf tools: Add rm_rf_perf_data function
perf tools: Add pattern name checking to rm_rf
perf tools: Add depth checking to rm_rf
perf data: Add global path holder
...
Prohibit probing on the functions called before kprobe_int3_handler()
in do_int3(). More specifically, ftrace_int3_handler(),
poke_int3_handler(), and ist_enter(). And since rcu_nmi_enter() is
called by ist_enter(), it also should be marked as NOKPROBE_SYMBOL.
Since those are handled before kprobe_int3_handler(), probing those
functions can cause a breakpoint recursion and crash the kernel.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/154998793571.31052.11301258949601150994.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Update .h file SPDX comment format per Joe Perches. ]
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
The ever-evolving IS_ENABLED() macro is intended for CONFIG_* Kconfig
options, but rcuperf currently uses it for the decidedly non-CONFIG_*
MODULE macro. In the spirit of not inviting trouble, this commit
substitutes tried-and-true #ifdef.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Beyond a certain point in the CPU-hotplug offline process, timers get
stranded on the outgoing CPU, and won't fire until that CPU comes back
online, which might well be never. This commit therefore adds a hook
in torture_onoff_init() that is invoked from torture_offline(), which
rcutorture uses to occasionally wait for a grace period. This should
result in failures for RCU implementations that rely on stranded timers
eventually firing in the absence of the CPU coming back online.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit records grace periods in rcutorture's n_launders_hist[]
histogram, thus allowing rcu_torture_fwd_cb_hist() to print out the
elapsed number of grace periods between buckets. This information
helps to determine whether a lack of forward progress is due to stalled
grace periods on the one hand or due to sluggish callback invocation on
the other.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
srcu_queue_delayed_work_on() disables preemption (and therefore CPU
hotplug in RCU's case) and then checks based on its own accounting if a
CPU is online. If the CPU is online it uses queue_delayed_work_on()
otherwise it fallbacks to queue_delayed_work().
The problem here is that queue_work() on -RT does not work with disabled
preemption.
queue_work_on() works also on an offlined CPU. queue_delayed_work_on()
has the problem that it is possible to program a timer on an offlined
CPU. This timer will fire once the CPU is online again. But until then,
the timer remains programmed and nothing will happen.
Add a local timer which will fire (as requested per delay) on the local
CPU and then enqueue the work on the specific CPU.
RCUtorture testing with SRCU-P for 24h showed no problems.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit updates the DYNTICK_IRQ_NONIDLE header comment to remove
the obsolete commentary about unmatched rcu_irq_{enter,exit}().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit removes the "@irq" argument from the rcu_nmi_exit() docbook
header, given that this function now has no arguments.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
It turns out that it is queue_delayed_work_on() rather than
queue_work_on() that has difficulties when used concurrently with
CPU-hotplug removal operations. It is therefore unnecessary to protect
CPU identification and queue_work_on() with preempt_disable().
This commit therefore removes the preempt_disable() and preempt_enable()
from sync_rcu_exp_select_cpus(), which has the further benefit of reducing
the number of changes that must be maintained in the -rt patchset.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Although the name rcu_process_callbacks() still makes sense for Tiny
RCU, where most of what it does is invoke callbacks, it no longer makes
much sense for Tree RCU, especially given that the actually callback
invocation is relegated to rcu_do_batch(), or, for no-CBs CPUs, to the
rcuo kthreads. Especially in the latter case, rcu_process_callbacks()
has very little to do with actual callbacks. A better description of
this function is that it performs RCU's core processing.
This commit therefore changes the name of Tree RCU's rcu_process_callbacks()
function to rcu_core(), which also has the virtue of being consistent with
the existing invoke_rcu_core() function.
While in the area, the header comment is reworked.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The name rcu_check_callbacks() arguably made sense back in the early
2000s when RCU was quite a bit simpler than it is today, but it has
become quite misleading, especially with the advent of dyntick-idle
and NO_HZ_FULL. The rcu_check_callbacks() function is RCU's hook into
the scheduling-clock interrupt, and is now but one of many ways that
callbacks get promoted to invocable state.
This commit therefore changes the name to rcu_sched_clock_irq(),
which is the same number of characters and clearly indicates this
function's relation to the rest of the Linux kernel. In addition, for
the sake of consistency, rcu_flavor_check_callbacks() is also renamed
to rcu_flavor_sched_clock_irq().
While in the area, the header comments for both functions are reworked.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Currently, __note_gp_changes() checks to see if the rcu_node structure's
->gp_seq_needed is greater than or equal to that of the rcu_data
structure, and if so, updates the rcu_data structure's ->gp_seq_needed
field. This results in a useless store in the case where the two fields
are equal.
This commit therefore carries out this store only in the case where the
rcu_node structure's ->gp_seq_needed is strictly greater than that of
the rcu_data structure.
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Link: https://lkml.kernel.org/r/88DC34334CA3444C85D647DBFA962C2735AD5F77@SHSMSX104.ccr.corp.intel.com
The rcu_gp_kthread_wake() function is invoked when it might be necessary
to wake the RCU grace-period kthread. Because self-wakeups are normally
a useless waste of CPU cycles, if rcu_gp_kthread_wake() is invoked from
this kthread, it naturally refuses to do the wakeup.
Unfortunately, natural though it might be, this heuristic fails when
rcu_gp_kthread_wake() is invoked from an interrupt or softirq handler
that interrupted the grace-period kthread just after the final check of
the wait-event condition but just before the schedule() call. In this
case, a wakeup is required, even though the call to rcu_gp_kthread_wake()
is within the RCU grace-period kthread's context. Failing to provide
this wakeup can result in grace periods failing to start, which in turn
results in out-of-memory conditions.
This race window is quite narrow, but it actually did happen during real
testing. It would of course need to be fixed even if it was strictly
theoretical in nature.
This patch does not Cc stable because it does not apply cleanly to
earlier kernel versions.
Fixes: 48a7639ce8 ("rcu: Make callers awaken grace-period kthread")
Reported-by: "He, Bo" <bo.he@intel.com>
Co-developed-by: "Zhang, Jun" <jun.zhang@intel.com>
Co-developed-by: "He, Bo" <bo.he@intel.com>
Co-developed-by: "xiao, jin" <jin.xiao@intel.com>
Co-developed-by: Bai, Jie A <jie.a.bai@intel.com>
Signed-off: "Zhang, Jun" <jun.zhang@intel.com>
Signed-off: "He, Bo" <bo.he@intel.com>
Signed-off: "xiao, jin" <jin.xiao@intel.com>
Signed-off: Bai, Jie A <jie.a.bai@intel.com>
Signed-off-by: "Zhang, Jun" <jun.zhang@intel.com>
[ paulmck: Switch from !in_softirq() to "!in_interrupt() &&
!in_serving_softirq() to avoid redundant wakeups and to also handle the
interrupt-handler scenario as well as the softirq-handler scenario that
actually occurred in testing. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Link: https://lkml.kernel.org/r/CD6925E8781EFD4D8E11882D20FC406D52A11F61@SHSMSX104.ccr.corp.intel.com
Life is hard if RCU manages to get stuck without triggering RCU CPU
stall warnings or triggering the rcu_check_gp_start_stall() checks
for failing to start a grace period. This commit therefore adds a
boot-time-selectable sysrq key (commandeering "y") that allows manually
dumping Tree RCU state. The new rcutree.sysrq_rcu kernel boot parameter
must be set for this sysrq to be available.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_check_gp_kthread_starvation() function can be invoked without
holding locks, so the access to the rcu_state structure's ->gp_flags
field must be protected with READ_ONCE(). This commit therefore adds
this protection.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If a grace period fails to start (for example, because you commented
out the last two lines of rcu_accelerate_cbs_unlocked()), rcu_core()
will invoke rcu_check_gp_start_stall(), which will notice and complain.
However, this complaint is lacking crucial debugging information such
as when the last wakeup executed and what the value of ->gp_seq was at
that time. This commit therefore removes the current pr_alert() from
rcu_check_gp_start_stall(), instead invoking show_rcu_gp_kthreads(),
which has been updated to print the needed information, which is collected
by rcu_gp_kthread_wake().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_cpu_kthread_cpu used to provide debugfs information, but is no
longer used. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given that RCU has a perfectly good per-CPU rcu_data structure, most
per-CPU quantities should be stored there.
This commit therefore moves the rcu_cpu_has_work per-CPU variable to
the rcu_data structure. This also makes this variable unconditionally
present, which should be acceptable given the memory reduction due to the
RCU flavor consolidation and also due to simplifications this will enable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_cpu_kthread_loops variable used to provide debugfs information,
but is no longer used. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given that RCU has a perfectly good per-CPU rcu_data structure, most
per-CPU quantities should be stored there.
This commit therefore moves the rcu_cpu_kthread_status per-CPU variable
to the rcu_data structure. This also makes this variable unconditionally
present, which should be acceptable given the memory reduction due to the
RCU flavor consolidation and also due to simplifications this will enable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given that RCU has a perfectly good per-CPU rcu_data structure, most
per-CPU quantities should be stored there.
This commit therefore moves the rcu_cpu_kthread_task per-CPU variable to
the rcu_data structure. This also makes this variable unconditionally
present, which should be acceptable given the memory reduction due to the
RCU flavor consolidation and also due to simplifications this will enable.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
It is perfectly fine to set the rcutree.jiffies_till_first_fqs boot
parameter to zero, in fact, this can be useful on specialty systems that
usually have at least one idle CPU and that need fast grace periods.
This is because this setting causes the RCU grace-period kthread to
scan for idle threads immediately after grace-period initialization,
as opposed to waiting several jiffies to do so.
It is also perfectly fine to set the rcutree.rcu_kick_kthreads kernel
parameter, which gives the RCU grace-period kthread an extra wakeup
if it doesn't make progress for a period of three times the setting of
the rcutree.jiffies_till_first_fqs boot parameter. This is of course
problematic when the value of this parameter is zero, as it can result
in unnecessary wakeup IPIs along with unnecessary WARN_ONCE() invocations.
This commit therefore defers kthread kicking for at least two jiffies,
regardless of the setting of rcutree.jiffies_till_first_fqs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there were multiple flavors of RCU, it was necessary to
separately count lazy and non-lazy callbacks for each CPU. These counts
were used in CONFIG_RCU_FAST_NO_HZ kernels to determine how long a newly
idle CPU should be allowed to sleep before handling its RCU callbacks.
But now that there is only one flavor, the callback counts for a given
CPU's sole rcu_data structure are the counts for that CPU.
This commit therefore removes the rcu_data structure's ->nonlazy_posted
and ->nonlazy_posted_snap fields, the rcu_idle_count_callbacks_posted()
and rcu_cpu_has_callbacks() functions, repurposes the rcu_data structure's
->all_lazy field to record the laziness state at the beginning of the
latest idle sojourn, and modifies CONFIG_RCU_FAST_NO_HZ RCU CPU stall
warnings accordingly.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that _synchronize_rcu_expedited() has only one caller, and given that
this is a tail call, this commit inlines _synchronize_rcu_expedited()
into synchronize_rcu_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that rcu_blocking_is_gp() makes the correct immediate-return
decision for both PREEMPT and !PREEMPT, a single implementation of
synchronize_rcu() will work correctly under both configurations.
This commit therefore eliminates a few lines of code by consolidating
the two implementations of synchronize_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The CONFIG_PREEMPT=n and CONFIG_PREEMPT=y implementations of
synchronize_rcu_expedited() are quite similar, and with small
modifications to rcu_blocking_is_gp() can be made identical. This commit
therefore makes this change in order to save a few lines of code and to
reduce the amount of duplicate code.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Back when there could be multiple RCU flavors running in the same kernel
at the same time, it was necessary to specify the expedited grace-period
IPI handler at runtime. Now that there is only one RCU flavor, the
IPI handler can be determined at build time. There is therefore no
longer any reason for the RCU-preempt and RCU-sched IPI handlers to
have different names, nor is there any reason to pass these handlers in
function arguments and in the data structures enclosing workqueues.
This commit therefore makes all these changes, pushing the specification
of the expedited grace-period IPI handler down to the point of use.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_kthread_do_work() function has a single-line body and only one
remaining caller. This commit therefore saves a few lines of code by
inlining rcu_kthread_do_work() into its sole remaining caller.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Now that the RCU flavors have been consolidated, RCU_BH_FLAVOR and
RCU_SCHED_FLAVOR are no longer used. This commit therefore saves a
few lines by removing them.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given that rcu_force_quiescent_state() is a simple wrapper around
force_quiescent_state(), this commit saves a few lines of code by
inlining force_quiescent_state() into rcu_force_quiescent_state(),
and changing all references to force_quiescent_state() to instead
invoke rcu_force_quiescent_state().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
During expedited RCU grace-period initialization, IPIs are sent to
all non-idle online CPUs. The IPI handler checks to see if the CPU is
in quiescent state, reporting one if so. This handler looks at three
different cases: (1) The CPU is not in an rcu_read_lock()-based critical
section, (2) The CPU is in the process of exiting an rcu_read_lock()-based
critical section, and (3) The CPU is in an rcu_read_lock()-based critical
section. In case (2), execution falls through into case (3).
This is harmless from a functionality viewpoint, but can result in
needless overhead during an improbable corner case. This commit therefore
adds the "return" statement needed to prevent fall-through.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Given RCU flavor consolidation, the name rcu_spawn_all_nocb_kthreads()
is quite misleading. It no longer ever creates more than one kthread,
and it does so only for the specified CPU. This commit therefore changes
this name to the more descriptive rcu_spawn_cpu_nocb_kthread(), and also
fixes up a similar issue in its header comment while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Both CONTEXT_TRACKING and CONTEXT_TRACKING_FORCE are currently defined
in kernel/rcu/kconfig, which might have made sense at some point, but
no longer does given that RCU refers to neither of these Kconfig options.
Therefore move them to kernel/time/Kconfig, where the rest of the
NO_HZ_FULL Kconfig options live.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/20181220170525.GA12579@linux.ibm.com
The "busted" rcutorture type is an intentionally broken implementation
of RCU. Doing forward-progress testing on this implementation is not
particularly meaningful on the one hand and can result in fatal abuse
of the memory allocator on the other. This commit therefore disables
forward-progress testing of the "busted" rcutorture type.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit narrows the scope of each bucket of the forward-progress
callback-invocation histograms from one second to 100 milliseconds, which
aids debugging of forward-progress problems by making shorter-duration
callback-invocation stalls visible.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit causes the OOM handler to do rcu_barrier() calls and to
free up forward-progress callbacks in order to recover from OOM events.
The current test is terminated, but subsequent forward-progress tests can
proceed. This allows a long test to result in multiple forward-progress
failures, greatly reducing the required testing time.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit prints the age of the forward-progress test in jiffies,
in order to allow better interpretation of the callback-invocation
histograms.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
If rcutorture's forward-progress tests fail while a grace period is not
in progress, it is useful to print the time since the last grace period
ended as a way to detect failure to launch a new grace period. This
commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
One reason why a forward-progress test might fail would be if something
prevented or delayed callback invocation. This commit therefore adds a
callback-invocation histogram printout when OOM is reported to rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit prints out the non-zero per-CPU callback counts when a
forware-progress error (OOM event) occurs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix a pair of uninitialized locals spotted by kbuild test robot. ]
The RCU CPU stall warnings print an estimate of the total number of
RCU callbacks queued in the system, but this estimate leaves out
the callbacks queued for nocbs CPUs. This commit therefore introduces
rcu_get_n_cbs_cpu(), which gives an accurate callback estimate for
both nocbs and normal CPUs, and uses this new function as needed.
This commit also introduces a rcu_get_n_cbs_nocb_cpu() helper function
that returns the number of callbacks for nocbs CPUs or zero otherwise,
and also uses this function in place of direct access to ->nocb_q_count
while in the area (fewer characters, you see).
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adds an OOM notifier during rcutorture forward-progress
testing. If this notifier is invoked, it dumps out some grace-period
state to help debug the forward-progress problem.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because rcutorture's forward-progress checking will trigger from an
OOM notifier, this notifier will introduce asynchronous concurrent
access to the rcu_fwd_startat variable. This commit therefore prepares
for this by converting updates to WRITE_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit affinities the forward-progress tests to avoid hogging a
housekeeping CPU on the theory that the offloaded callbacks will be
running on those housekeeping CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix NULL-pointer issue located by kbuild test robot. ]
Tested-by: Rong Chen <rong.a.chen@intel.com>
This commit splits rcu_torture_fwd_prog_nr() and rcu_torture_fwd_prog_cr()
functions out of rcu_torture_fwd_prog() in order to reduce indentation
pain and because rcu_torture_fwd_prog() was getting a bit too long.
In addition, this will enable easier conditional execution of the
rcu_torture_fwd_prog_cr() function, which can give false-positive
failures in some NO_HZ_FULL configurations due to overloading the
housekeeping CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the forward-progress code does a full-bore continuous callback
flood lasting multiple seconds, there is little point in also posting a
mere 60,000 callbacks every second or so. This commit therefore removes
the old cbflood testing. Over time, it may be desirable to concurrently
do full-bore continuous callback floods on all CPUs simultaneously, but
one dragon at a time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a call_rcu() flooding loop to the forward-progress test.
This emulates tight userspace loops that force call_rcu() invocations,
for example, the infamous loop containing close(open()) that instigated
the addition of blimit. If RCU does not make sufficient forward progress
in invoking the resulting flood of callbacks, rcutorture emits a warning.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
bug.2018.11.12a: Get rid of BUG_ON() and friends
consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup
doc.2018.11.12a: Documentation updates
fixes.2018.11.12a: Miscellaneous fixes
initrd.2018.11.08b: Automate creation of rcutorture initrd
sil.2018.11.12a: Remove more spin_unlock_wait() calls
In RCU, the distinction between "rsp", "rnp", and "rdp" has served well
for a great many years, but in SRCU, "sp" vs. "sdp" has proven confusing.
This commit therefore renames SRCU's "sp" pointers to "ssp", so that there
is "ssp" for srcu_struct pointer, "snp" for srcu_node pointer, and "sdp"
for srcu_data pointer.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The srcu_gp_start() function is called with the srcu_struct structure's
->lock held, but not with the srcu_data structure's ->lock. This is
problematic because this function accesses and updates the srcu_data
structure's ->srcu_cblist, which is protected by that lock. Failing to
hold this lock can result in corruption of the SRCU callback lists,
which in turn can result in arbitrarily bad results.
This commit therefore makes srcu_gp_start() acquire the srcu_data
structure's ->lock across the calls to rcu_segcblist_advance() and
rcu_segcblist_accelerate(), thus preventing this corruption.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: Sebastian Kuzminsky <seb.kuzminsky@gmail.com>
Signed-off-by: Dennis Krein <Dennis.Krein@netapp.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Dennis Krein <Dennis.Krein@netapp.com>
Cc: <stable@vger.kernel.org> # 4.16.x
Subtracting INT_MIN can be interpreted as unconditional signed integer
overflow, which according to the C standard is undefined behavior.
Therefore, kernel build arguments notwithstanding, it would be good to
future-proof the code. This commit therefore substitutes INT_MAX for
INT_MIN in order to avoid undefined behavior.
While in the neighborhood, this commit also creates some meaningful names
for INT_MAX and friends in order to improve readability, as suggested
by Joel Fernandes.
Reported-by: Ran Rozenstein <ranro@mellanox.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because __this_cpu_read() can be lighter weight than equivalent uses of
this_cpu_ptr(), this commit replaces the latter with the former.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In PREEMPT kernels, an expedited grace period might send an IPI to a
CPU that is executing an RCU read-side critical section. In that case,
it would be nice if the rcu_read_unlock() directly interacted with the
RCU core code to immediately report the quiescent state. And this does
happen in the case where the reader has been preempted. But it would
also be a nice performance optimization if immediate reporting also
happened in the preemption-free case.
This commit therefore adds an ->exp_hint field to the task_struct structure's
->rcu_read_unlock_special field. The IPI handler sets this hint when
it has interrupted an RCU read-side critical section, and this causes
the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(),
which, if preemption is enabled, reports the quiescent state immediately.
If preemption is disabled, then the report is required to be deferred
until preemption (or bottom halves or interrupts or whatever) is re-enabled.
Because this is a hint, it does nothing for more complicated cases. For
example, if the IPI interrupts an RCU reader, but interrupts are disabled
across the rcu_read_unlock(), but another rcu_read_lock() is executed
before interrupts are re-enabled, the hint will already have been cleared.
If you do crazy things like this, reporting will be deferred until some
later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Currently, rcu_gp_cleanup() traces the end of the old grace period after
the old grace period has officially ended. This might make intuitive
sense, but it also makes for confusing event-trace output because the
"end" trace displays not the old but instead the new grace-period number.
This commit therefore traces the end of an old grace period just before
that grace period officially ends.
Reported-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because RCU avoids interrupting idle CPUs, rcu_is_watching() is used to
test whether or not it is currently legal to run RCU read-side critical
sections on this CPU. However, the first sentence and last sentences
of current comment for rcu_is_watching have opposite meaning of what
is expected. This commit therefore fixes this header comment.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adds a printout of the number of jiffies since the last time
that the RCU grace-period kthread did any processing. This can be useful
when tracking down forward-progress issues.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit adds the name of the RCU grace-period state to
the show_rcu_gp_kthreads() output in order to ease debugging.
This commit also moves gp_state_getname() up in the code so that
show_rcu_gp_kthreads() can use it.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In order to debug forward-progress stalls, it is necessary to check
for excessively delayed grace-period starts. This is currently done
for RCU CPU stall warnings by rcu_check_gp_start_stall(), which checks
to see if the start of a requested grace period has been delayed by an
RCU CPU stall warning period. Because rcutorture will need to check
for the time consumed by an RCU forward-progress delay, this commit
promotes gpssdelay from a local variable to a formal parameter. It is
not necessary to export rcu_check_gp_start_stall() because rcutorture
will access it via a wrapper function.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_check_gp_start_stall() function multiplies the return value
from rcu_jiffies_till_stall_check() by HZ, but the units are already
in jiffies. This commit therefore avoids the need for introduction of
a jiffies-squared unit by removing the extraneous multiplication.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The update.c file has a number of calls to BUG_ON(), which panics the
kernel, which is not a good strategy for devices (like embedded) that
don't have a way to capture console output. This commit therefore
converts these BUG_ON() calls to WARN_ON_ONCE() and WARN_ONCE().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The tree_plugin.h file has a number of calls to BUG_ON(), which panics
the kernel, which is not a good strategy for devices (like embedded)
that don't have a way to capture console output. This commit therefore
converts these BUG_ON() calls to WARN_ON_ONCE() and WARN_ONCE().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Fix typo: s/rcuo/rcub/. ]
The CPU-selection code in sync_rcu_exp_select_cpus() disables preemption
to prevent the cpu_online_mask from changing. However, this relies on
the stop-machine mechanism in the CPU-hotplug offline code, which is not
desirable (it would be good to someday remove the stop-machine mechanism).
This commit therefore instead uses the relevant leaf rcu_node structure's
->ffmask, which has a bit set for all CPUs that are fully functional.
A given CPU's bit is cleared very early during offline processing by
rcutree_offline_cpu() and set very late during online processing by
rcutree_online_cpu(). Therefore, if a CPU's bit is set in this mask, and
preemption is disabled, we have to be before the synchronize_sched() in
the CPU-hotplug offline code, which means that the CPU is guaranteed to be
workqueue-ready throughout the duration of the enclosing preempt_disable()
region of code.
This also has the side-effect of using WORK_CPU_UNBOUND if all the CPUs for
this leaf rcu_node structure are offline, which is an acceptable difference
in behavior.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Ever since cdf7abc461 ("srcu: Allow use of Tiny/Tree SRCU from
both process and interrupt context"), it has been permissible
to use SRCU read-side critical sections in interrupt context.
This allows __call_srcu() to use SRCU read-side critical sections to
prevent a new SRCU grace period from ending before the call to either
srcu_funnel_gp_start() or srcu_funnel_exp_start completes, thus preventing
SRCU grace-period counter overflow during that time.
Note that this does not permit removal of the counter-wrap checks in
srcu_gp_end(). These check are necessary to handle the case where
a given CPU does not interact at all with SRCU for an extended time
period.
This commit therefore adds an SRCU read-side critical section to
__call_srcu() in order to prevent grace period counter wrap during
the funnel-locking process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit retains all the various gp_ops[] entries, but makes their
update functions all be synchronize_rcu(), call_rcu() and rcu_barrier().
The read-side checks remain consistent with the various RCU flavors,
which still exist on the read side.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Now that synchronize_rcu() waits for both RCU read-side critical
sections and preempt-disabled regions of code, the sole caller of
synchronize_rcu_mult() can be replaced by synchronize_rcu().
This patch makes this change and removes synchronize_rcu_mult().
Note that _wait_rcu_gp() still supports synchronize_rcu_mult(),
and thus might be simplified in the future to take only take
a single call_rcu() function rather than the current list of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Recent changes have removed the old ->gp_seq_needed field from the
rcu_state structure, which in turn obsoleted a couple of comments in
the rcu_node and rcu_data structures. This commit therefore updates
these comments accordingly.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcu_bh_state and rcu_sched_state variables were removed during the
RCU flavor consolidations, but external declarations remain in tree.h.
This commit therefore removes these obsolete declarations.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <kernel-team@android.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The tree.c file has a number of calls to BUG_ON(), which panics the
kernel, which is not a good strategy for devices (like embedded) that
don't have a way to capture console output. This commit therefore
converts these BUG_ON() calls to WARN_ON_ONCE() and WARN_ONCE().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The sync.c file has a number of calls to BUG_ON(), which panics the
kernel, which is not a good strategy for devices (like embedded) that
don't have a way to capture console output. This commit therefore
changes these BUG_ON() calls to WARN_ON_ONCE(), but does so quite naively.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Allocating a list_head structure that is almost never used, and, when
used, is used only during early boot (rcu_init() and earlier), is a bit
wasteful. This commit therefore eliminates that list_head in favor of
the one in the work_struct structure. This is safe because the work_struct
structure cannot be used until after rcu_init() returns.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Event tracing is moving to SRCU in order to take advantage of the fact
that SRCU may be safely used from idle and even offline CPUs. However,
event tracing can invoke call_srcu() very early in the boot process,
even before workqueue_init_early() is invoked (let alone rcu_init()).
Therefore, call_srcu()'s attempts to queue work fail miserably.
This commit therefore detects this situation, and refrains from attempting
to queue work before rcu_init() time, but does everything else that it
would have done, and in addition, adds the srcu_struct to a global list.
The rcu_init() function now invokes a new srcu_init() function, which
is empty if CONFIG_SRCU=n. Otherwise, srcu_init() queues work for
each srcu_struct on the list. This all happens early enough in boot
that there is but a single CPU with interrupts disabled, which allows
synchronization to be dispensed with.
Of course, the queued work won't actually be invoked until after
workqueue_init() is invoked, which happens shortly after the scheduler
is up and running. This means that although call_srcu() may be invoked
any time after per-CPU variables have been set up, there is still a very
narrow window when synchronize_srcu() won't work, and this window
extends from the time that the scheduler starts until the time that
workqueue_init() returns. This can be fixed in a manner similar to
the fix for synchronize_rcu_expedited() and friends, but until someone
actually needs to use synchronize_srcu() during this window, this fix
is added churn for no benefit.
Finally, note that Tree SRCU's new srcu_init() function invokes
queue_work() rather than the queue_delayed_work() function that is
invoked post-boot. The reason is that queue_delayed_work() will (as you
would expect) post a timer, and timers have not yet been initialized.
So use of queue_work() avoids the complaints about use of uninitialized
spinlocks that would otherwise result. Besides, some delay is already
provide by the aforementioned fact that the queued work won't actually
be invoked until after the scheduler is up and running.
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
1e64b15a4b ("rcu: Fix grace-period hangs due to race with CPU offline")
added spinlock_t ofl_lock to the rcu_state structure, then takes it with
preemption disabled during CPU offline, which gives the -rt patchset's
sleeping spinlock heartburn.
This commit therefore converts ->ofl_lock to raw_spinlock_t.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
The rcu_data structure's ->dynticks_fqs is incremented but never
accesses. Its ->cond_resched_completed field isn't used at all.
This commit therefore removes both fields.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit move ->dynticks from the rcu_dynticks structure to the
rcu_data structure, replacing the field of the same name. It also updates
the code to access ->dynticks from the rcu_data structure and to use the
rcu_data structure rather than following to now-gone ->dynticks field
to the now-gone rcu_dynticks structure. While in the area, this commit
also fixes up comments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->dynticks_nesting and ->dynticks_nmi_nesting from
the rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->rcu_need_heavy_qs and ->rcu_urgent_qs from the
rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->all_lazy, ->nonlazy_posted and ->nonlazy_posted_snap
from the rcu_dynticks structure and updates the code to access them from
the rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->last_accelerate and ->last_advance_all from the
rcu_dynticks structure and updates the code to access them from the
rcu_data structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes ->tick_nohz_enabled_snap from the rcu_dynticks
structure and updates the code to access it from the rcu_data
structure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only ever one rcu_data structure per CPU, there is no
need for a separate rcu_dynticks structure. This commit therefore adds
the rcu_dynticks fields into the rcu_data structure in preparation for
removing the rcu_dynticks structure entirely. Note that the ->dynticks
field will be handled specially because there is a field by that name
in both structures.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The resched_cpu() interface is quite handy, but it does acquire the
specified CPU's runqueue lock, which does not come for free. This
commit therefore substitutes the following when directing resched_cpu()
at the current CPU:
set_tsk_need_resched(current);
set_preempt_need_resched();
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Because nohz_full CPUs can leave the scheduler-clock interrupt disabled
even when in kernel mode, RCU cannot rely on rcu_check_callbacks() to
enlist the scheduler's aid in extracting a quiescent state from such CPUs.
This commit therefore more aggressively uses resched_cpu() on nohz_full
CPUs that fail to pass through a quiescent state in a timely manner.
By default, the resched_cpu() beating starts 300 milliseconds into the
quiescent state.
While in the neighborhood, add a ->last_fqs_resched field to the rcu_data
structure in order to rate-limit resched_cpu() calls from the RCU
grace-period kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The jiffies_till_sched_qs value used to determine how old a grace period
must be before RCU enlists the help of the scheduler to force a quiescent
state on the holdout CPU. Currently, this defaults to HZ/10 regardless of
system size and may be set only at boot time. This can be a problem for
very large systems, because if the values of the jiffies_till_first_fqs
and jiffies_till_next_fqs kernel parameters are left at their defaults,
they are calculated to increase as the number of CPUs actually configured
on the system increases. Thus, on a sufficiently large system, RCU would
enlist the help of the scheduler before the grace-period kthread had a
chance to scan for idle CPUs, which wastes CPU time.
This commit therefore allows jiffies_till_sched_qs to be set, if desired,
but if left as default, computes is as jiffies_till_first_fqs plus twice
jiffies_till_next_fqs, thus allowing three force-quiescent-state scans
for idle CPUs. This scales with the number of CPUs, providing sensible
default values.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds rcu_head_init() and rcu_head_after_call_rcu() functions
to help RCU users detect when another CPU has passed the specified
rcu_head structure and function to call_rcu(). The rcu_head_init()
should be invoked before making the structure visible to RCU readers,
and then the rcu_head_after_call_rcu() may be invoked from within
an RCU read-side critical section on an rcu_head structure that
was obtained during a traversal of the data structure in question.
The rcu_head_after_call_rcu() function will return true if the rcu_head
structure has already been passed (with the specified function) to
call_rcu(), otherwise it will return false.
If rcu_head_init() has not been invoked on the rcu_head structure
or if the rcu_head (AKA callback) has already been invoked, then
rcu_head_after_call_rcu() will do WARN_ON_ONCE().
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Apply neilb naming feedback. ]
The ->rcu_qs_ctr counter was intended to allow providing a lightweight
report of a quiescent state to all RCU flavors. But now that there is
only one flavor of RCU in any one running kernel, there is no point in
having this feature. This commit therefore removes the ->rcu_qs_ctr
field from the rcu_dynticks structure and the ->rcu_qs_ctr_snap field
from the rcu_data structure. This results in the "rqc" option to the
rcu_fqs trace event no longer being used, so this commit also removes the
"rqc" description from the header comment.
While in the neighborhood, this commit also causes the forward-progress
request .rcu_need_heavy_qs be set one jiffies_till_sched_qs interval
later in the grace period than the first setting of .rcu_urgent_qs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a long-running CPU-bound in-kernel task invokes call_rcu(), the
callback won't be invoked until the next context switch. If there are
no other runnable tasks (which is not an uncommon situation on deep
embedded systems), the callback might never be invoked.
This commit therefore causes rcu_check_callbacks() to ask the scheduler
for a context switch if there are callbacks posted that are still waiting
for a grace period.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that RCU can have readers with multiple segments, it is quite
possible that a specific sequence of reader segments might result in
an rcutorture failure (reader spans a full grace period as detected
by one of the grace-period primitives) or an rcutorture close call
(reader potentially spans a full grace period based on reading out
the RCU implementation's grace-period counter, but with no ordering).
In such cases, it would clearly ease debugging if the offending specific
sequence was known. For the first reader encountering a failure or a
close call, this commit therefore dumps out the segments, delay durations,
and whether or not the reader was preempted.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Mark variables static, as suggested by kbuild test robot. ]
The patch making need_resched() respond to urgent RCU-QS needs used
is_idle_task(current) to detect an interrupt from idle, which does work
reasonably, but is (in theory at least) vulnerable to loops containing
need_resched() invoked from within RCU_NONIDLE() or its tracepoint
equivalent. This commit therefore moves rcu_is_cpu_rrupt_from_idle()
to a place from which rcu_check_callbacks() can invoke it and replaces
the is_idle_task(current) with rcu_is_cpu_rrupt_from_idle().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent
need for an RCU quiescent state from the force-quiescent-state processing
within the grace-period kthread to context switches and to cond_resched().
Unfortunately, such urgent needs are not communicated to need_resched(),
which is sometimes used to decide when to invoke cond_resched(), for
but one example, within the KVM vcpu_run() function. As of v4.15, this
can result in synchronize_sched() being delayed by up to ten seconds,
which can be problematic, to say nothing of annoying.
This commit therefore checks rcu_dynticks.rcu_urgent_qs from within
rcu_check_callbacks(), which is invoked from the scheduling-clock
interrupt handler. If the current task is not an idle task and is
not executing in usermode, a context switch is forced, and either way,
the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current
task is an idle task, then RCU's dyntick-idle code will detect the
quiescent state, so no further action is required. Similarly, if the
task is executing in usermode, other code in rcu_check_callbacks() and
its called functions will report the corresponding quiescent state.
Reported-by: Marius Hillenbrand <mhillenb@amazon.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because rcu_barrier() is a one-line wrapper function for _rcu_barrier()
and because nothing else calls _rcu_barrier(), this commit inlines
_rcu_barrier() into rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that rcu_all_qs() is used only in !PREEMPT builds, move it to
tree_plugin.h so that it is defined only in those builds. This in
turn means that rcu_momentary_dyntick_idle() is only used in !PREEMPT
builds, but it is simply marked __maybe_unused in order to keep it
near the rest of the dyntick-idle code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes rcu_sched_get_gp_seq(), rcu_bh_get_gp_seq(),
rcu_exp_batches_completed_sched(), rcu_sched_force_quiescent_state(),
and rcu_bh_force_quiescent_state(), which are no longer used because
rcutorture no longer does "rcu_bh" and "rcu_sched" torture types.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of point
in testing them. This commit therefore removes the "rcu_bh" and "sched"
torture types from rcuperf.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of point
in testing them. This commit therefore removes the "rcu_bh" and "sched"
torture types from rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the RCU-bh and RCU-sched update-side functions are simple
wrappers around their RCU counterparts, there isn't a whole lot of
point in testing them. This commit therefore removes the self-test
capability and removes the corresponding kernel-boot parameters.
It also updates the various rcutorture .boot files to remove the
kernel boot parameters that call for testing RCU-bh and RCU-sched.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Since there is now a single consolidated RCU flavor, rcutorture
needs to test extending of RCU readers via rcu_read_lock_bh() and
rcu_read_lock_sched(). This commit adds this support, with added checks
(just like for local_bh_enable()) to ensure that rcu_read_unlock_bh()
will not be invoked while interrupts are disabled.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines by consolidating the RCU-sched function
definitions at the end of include/linux/rcupdate.h. This consolidation
also makes it easier to remove them all when the time comes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit saves a few lines by consolidating the RCU-bh function
definitions at the end of include/linux/rcupdate.h. This consolidation
also makes it easier to remove them all when the time comes.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_kthread() function is long and deeply indented, so this
commit pulls the loop that repeatedly invokes rcu_gp_fqs() into a new
rcu_gp_fqs_loop() function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Consolidation of the RCU flavors into one makes increment_cpu_stall_ticks()
a trivial one-line function with only one caller. This commit therefore
inlines it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pointers to rcu_data structures should be named rdp, not rsp. This
commit therefore makes this change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_cpu_starting() and rcu_init_one().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces rsp
with &rcu_state in rcu_barrier_callback(), rcu_barrier_func(), and
_rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_report_qs_rnp(), force_quiescent_state(), and
rcu_check_gp_start_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point in
maintaining a pointer to it. This commit therefore replaces rsp with
&rcu_state in rcu_do_batch(), invoke_rcu_callbacks(), and __call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces
rsp with &rcu_state in rcu_start_this_gp(), rcu_accelerate_cbs(),
__note_gp_changes(), rcu_gp_init(), rcu_gp_fqs(), rcu_gp_cleanup(),
rcu_gp_kthread(), and rcu_report_qs_rsp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is less point
in maintaining a pointer to it. This commit therefore replaces rsp
with &rcu_state in print_other_cpu_stall(), print_cpu_stall(), and
check_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes the rsp and gpa local variables, repurposes the j
local variable and adds a gpk (GP kthread) local to improve readability.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit restructures rcutorture_get_gp_data() to take advantage of
the fact that there is only one flavor of RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only ever a single flavor of RCU in a given kernel
build, there isn't a whole lot of point in having a flavor-traversal
macro. This commit therefore removes it and converts calls to it to
straightline code, inlining trivial functions as appropriate.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes the last non-flavor-traversal rsp local variable from
kernel/rcu/tree_plugin.h in favor of &rcu_state. The flavor-traversal
locals will be removed with the removal of flavor traversal.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that there is only one rcu_state structure, there is no need for the
rcu_data structure to indicate which it corresponds to. This commit
therefore removes the rcu_data structure's ->rsp field, replacing all
remaining uses of it with &rcu_state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's rcu_node
tree's accessor macros. This commit therefore removes the rsp parameter
from those macros in kernel/rcu/rcu.h, and removes some now-unused rsp
local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to
RCU's functions. This commit therefore removes the rsp parameter
from the code in kernel/rcu/tree_exp.h, and removes all of the
rsp local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to
RCU's functions. This commit therefore removes the rsp parameter
from rcu_nocb_cpu_needs_barrier(), rcu_spawn_one_nocb_kthread(),
rcu_organize_nocb_kthreads(), rcu_nocb_cpu_needs_barrier(), and
rcu_nohz_full_cpu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_cpu_stall_info().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_spawn_one_boost_kthread().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
dump_blkd_tasks() and rcu_preempt_blocked_readers_cgp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_print_detail_task_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_init_one() and rcu_dump_rcu_node_tree().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of
the Linux kernel, so there is no need to pass it as a parameter
to RCU's functions. This commit therefore removes the rsp
parameter from rcu_boot_init_percpu_data(), rcu_init_percpu_data(),
rcu_cleanup_dying_idle_cpu(), and rcu_migrate_callbacks(). While in
the neighborhood, line the last three into rcutree_prepare_cpu(),
rcu_report_dead() and rcutree_migrate_callbacks(), respectively.
This also gets rid of the for_each_rcu_flavor() calls that were in
those tree functions.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
_rcu_barrier_trace() and _rcu_barrier().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's functions.
This commit therefore removes the rsp parameter from __rcu_pending(),
and also inlines it into rcu_pending(), removing the for_each_rcu_flavor()
while in the neighborhood..
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__call_rcu_core() and __call_rcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__rcu_process_callbacks(), and also inlines it into rcu_process_callbacks(),
removing the for_each_rcu_flavor() while in the neighborhood.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_gp_start_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
force_qs_rnp() and force_quiescent_state().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_do_batch().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_cleanup_dying_cpu() and rcu_cleanup_dead_cpu(). And, as long as
we are in the neighborhood, inlines them into rcutree_dying_cpu() and
rcutree_dead_cpu(), respectively. This also eliminates a pair of
for_each_rcu_flavor() loops.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_quiescent_state().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_init(), rcu_gp_fqs_check_wake(), rcu_gp_fqs(), rcu_gp_cleanup(),
and rcu_gp_kthread().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_slow().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
__note_gp_changes().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_advance_cbs().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_accelerate_cbs_unlocked().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_accelerate_cbs().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_kthread_wake().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_future_gp_cleanup().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
check_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
print_other_cpu_stall().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_stall_kick_kthreads().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_dump_cpu_stacks().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_check_gp_kthread_starvation().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
record_gp_stall_check_time().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_get_root().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_gp_in_progress().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rdp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_unblock_qs_rnp(), which is particularly appropriate in
this case given that this parameter is no longer used.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rsp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There now is only one rcu_state structure in a given build of the
Linux kernel, so there is no need to pass it as a parameter to RCU's
functions. This commit therefore removes the rsp parameter from
rcu_report_qs_rnp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_data_p pointer references the default set of per-CPU rcu_data
structures, that is, those that call_rcu() uses, as opposed to
call_rcu_bh() and sometimes call_rcu_sched(). But there is now only one
set of per-CPU rcu_data structures, so that one set is by definition
the default, which means that the rcu_data_p pointer no longer serves
any useful purpose. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state_p pointer references the default rcu_state structure,
that is, the one that call_rcu() uses, as opposed to call_rcu_bh()
and sometimes call_rcu_sched(). But there is now only one rcu_state
structure, so that one structure is by definition the default, which
means that the rcu_state_p pointer no longer serves any useful purpose.
This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state structure's ->rda field was used to find the per-CPU
rcu_data structures corresponding to that rcu_state structure. But now
there is only one rcu_state structure (creatively named "rcu_state")
and one set of per-CPU rcu_data structures (creatively named "rcu_data").
Therefore, uses of the ->rda field can always be replaced by "rcu_data,
and this commit makes that change and removes the ->rda field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_state structure's ->call field references the corresponding RCU
flavor's call_rcu() function. However, now that there is only ever one
rcu_state structure in a given build of the Linux kernel, and that flavor
uses plain old call_rcu(), there is not a lot of point in continuing to
have the ->call field. This commit therefore removes it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that a given build of the Linux kernel has only one set of rcu_state,
rcu_node, and rcu_data structures, there is no point in creating a macro
to declare and compile-time initialize them. This commit therefore
just does normal declaration and compile-time initialization of these
structures. While in the area, this commit also removes #ifndefs of
the no-longer-ever-defined preprocessor macro RCU_TREE_NONCORE.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit renames Tiny RCU functions so that the lowest level of
functionality is RCU (e.g., synchronize_rcu()) rather than RCU-sched
(e.g., synchronize_sched()). This provides greater naming compatibility
with Tree RCU, which will in turn permit more LoC removal once
the RCU-sched and RCU-bh update-side API is removed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix Tiny call_rcu()'s EXPORT_SYMBOL() in response to a bug
report from kbuild test robot. ]
Now that RCU-preempt knows about preemption disabling, its implementation
of synchronize_rcu() works for synchronize_sched(), and likewise for the
other RCU-sched update-side API members. This commit therefore confines
the RCU-sched update-side code to CONFIG_PREEMPT=n builds, and defines
RCU-sched's update-side API members in terms of those of RCU-preempt.
This means that any given build of the Linux kernel has only one
update-side flavor of RCU, namely RCU-preempt for CONFIG_PREEMPT=y builds
and RCU-sched for CONFIG_PREEMPT=n builds. This in turn means that kernels
built with CONFIG_RCU_NOCB_CPU=y have only one rcuo kthread per CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
The rcu_report_exp_rdp() function is always invoked with its "wake"
argument set to "true", so this commit drops this parameter. The only
potential call site that would use "false" is in the code driving the
expedited grace period, and that code uses rcu_report_exp_cpu_mult()
instead, which therefore retains its "wake" parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates comments and help text to account for the fact that
RCU-bh update-side functions are now simple wrappers for their RCU or
RCU-sched counterparts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the main RCU API knows about softirq disabling and softirq's
quiescent states, the RCU-bh update code can be dispensed with.
This commit therefore removes the RCU-bh update-side implementation and
defines RCU-bh's update-side API in terms of that of either RCU-preempt or
RCU-sched, depending on the setting of the CONFIG_PREEMPT Kconfig option.
In kernels built with CONFIG_RCU_NOCB_CPU=y this has the knock-on effect
of reducing by one the number of rcuo kthreads per CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit reduces the latency of expedited RCU grace periods by
reporting a quiescent state for the CPU at context-switch time.
In CONFIG_PREEMPT=y kernels, if the outgoing task is still within an
RCU read-side critical section (and thus still blocking some grace
period, perhaps including this expedited grace period), then that task
will already have been placed on one of the leaf rcu_node structures'
->blkd_tasks list.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>