Add check to avoid possible NULL pointer dereference issue.
This issue was reported by static analysis tools, we didn't face this
issue but we can't rule it out either as a false positive.
Reported-by: Keqiao Zhang <keqiao.zhang@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EFLYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JCuB/40P/KPRGlEFBSJAwTfCkjQxzvQUGBy
Y3w9QeMq3ONhCJt5BusmeuFqdkanzYqnl+NveGYKdKNTAwh6vEMGiMbGSB8dgrR5
R7PLNBDRJi7ZUDdOZle7VrdUiZWyieaZk/ecWxfTPKfqzoBjnM3XYSa30i55hvbQ
A2MTimFsO7nf0caLNBLqEqBjy68IHQ3tuHH27kA0MIpVNsYVrjaWfM400ot3odbg
0vMpNTM+PDcQGkWcq3sKJBOVVjmGg2Xs1yM5hv6Mu+q1zXLCtCKj+Pv+ZXC3BT6e
Yyxv/arpgvtjIU79Tv9RamVRC4jN6ZJRkThP9UW6JrX7tPCjvD+ygzPn
=4FMp
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.5
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EETsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BJCB/968YQYuvmvJbBify4l+l56rz3O0Qge
/dkifAsiBLYctwjYKVaqPhrcLts6gaKSZnKwNjF1d5ucjwb9y2cTuJoh65xJw4Z6
wgOBJiVC0wTdLzLMStVAX6QKFP6oVgWkKuaWRfhWiCbdWMVQesQlZePmu/PYU2IH
/B60aTN4noSMycFqmdHfyVGXnTX7cONCFr9cfE/EX+uQLCFe+QD7UItCEGl/1uwp
84mfNdLFkhX72yEEb5SZvGac5k9fyRvy1TPqkO5r+BQeYnePUMCpuA2mZaO9yBUh
r+6AMDcF300lXt860UtBidugpC5YM9vNUAu/dXMDowP8A+vBg2aquYe+
=GWKb
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
These are a collection of fixes since v5.4-rc4 that have accumilated,
they're all driver specific and there's nothing major in here so it's
probably not essential to actually send them but I'll leave that call to
you.
When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:
[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411
Fix that by rejecting the topology if the bytes data size > max_size
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_unregister_component() is calling snd_soc_lookup_component()
under mutex_lock(). But, snd_soc_lookup_component() itself is using
mutex_lock(), thus it will be dead-lock.
This patch adds _nolocked version of it, and avoid dead-lock issue.
Fixes: ac6a4dd3e9f0("ASoC: soc-core: use snd_soc_lookup_component() at snd_soc_unregister_component()")
Reported-by: "kernelci.org bot" <bot@kernelci.org>"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bltph4da.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF module load/unload tests show nasty recurring warnings:
WARNING: CPU: 5 PID: 1339 at sound/core/control.c:466
snd_ctl_remove+0xf0/0x100 [snd]
RIP: 0010:snd_ctl_remove+0xf0/0x100 [snd]
This regression was introduced by the removal of the call to
soc_remove_link_components() before soc_card_free() is invoked.
Go back to the initial order but only call
soc_remove_link_components() once.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 5a4c9f054c ("ASoC: soc-core: snd_soc_unbind_card() cleanup")
GitHub issue: https://github.com/thesofproject/linux/issues/1424
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145801.9316-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the example SOF amp widget topology, KASAN dumps this
when the AMP bytes kcontrol gets loaded:
[ 9.579548] BUG: KASAN: slab-out-of-bounds in
sof_control_load+0x8cc/0xac0 [snd_sof]
[ 9.588194] Write of size 40 at addr ffff8882314559dc by task
systemd-udevd/2411
Fix that by rejecting the topology if the bytes data size > max_size
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191106145816.9367-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core has some API which is used from topology, but it is doing
topology specific operation at soc-core.
soc-core should care about core things, and topology should care
about topology things, otherwise, it is very confusable.
For example topology type is not related to soc-core,
it is topology side issue.
This patch removes meaningless check from soc-core.
This patch keeps extra initialization/destruction at
snd_soc_add_dai_link() / snd_soc_remove_dai_link()
which were for topology.
From this patch, non-topology card can use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pni6251h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
This patch calls snd_soc_register_dai() from snd_soc_register_dais()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r22m251l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
Because of topology side specific reason,
it is calling snd_soc_dapm_new_dai_widgets(),
but it is not needed _dais() side.
This patch factorizes snd_soc_register_dai() to
topology / _dais() common part, and topology specific part.
And do topology specific part at soc-topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
To prepare it, this patch adds missing parameter legacy_dai_naming
to snd_soc_register_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
This patch adds missing soc_del_dai() and snd_soc_unregister_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9ry251z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_unregister_dais() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87woce2524.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_register_dai() next to
snd_soc_register_dais().
This is prepare for snd_soc_register_dais() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2wu2528.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_unregister_component() is now finding component manually,
but we already have snd_soc_lookup_component() to find component;
Let's use existing function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhha252c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core has
snd_soc_add_component(), snd_soc_component_add(),
snd_soc_del_component(), snd_soc_component_del().
These are very confusing naming.
snd_soc_component_xxx() are called from snd_soc_xxx_component(),
and these are very small.
Let's merge these into snd_soc_xxx_component(), and
remove snd_soc_component_xxx().
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rum3jmy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
Now ALSA SoC has snd_soc_add_component(), but there is no paired
snd_soc_del_component(). Thus, snd_soc_unregister_component() is
calling cleanup function randomly. it is difficult to read.
This patch adds missing snd_soc_del_component_unlocked() and
balance up code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/8736f23jn4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_lookup_component() is using mix of continue and break
in the same loop. It is odd.
This patch cleanup it.
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874kzi3jn8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves snd_soc_lookup_component() to upper side.
This is prepare for snd_soc_unregister_component()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zjy3jnd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
ALSA SoC has soc_bind_dai_link(), but its paired soc_unbind_dai_link()
is not implemented.
More confusable is that soc_remove_pcm_runtimes() which should be
soc_unbind_dai_link() is implemented without synchronised
to soc_bind_dai_link().
This patch cleanup this unbalance.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877e4e3jni.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we focus to soc_bind_dai_link() at snd_soc_instantiate_card(),
we will notice very complex operation.
static int snd_soc_instantiate_card(...)
{
...
/*
* (1) Bind dai_link via card pre-linked dai_link
*
* Bind dai_link via card pre-linked.
* 1 dai_link will be 1 rtd, and connected to card.
* for_each_card_prelinks() is for card pre-linked dai_link.
*
* Image
*
* card
* - rtd(A)
* - rtd(A)
*/
for_each_card_prelinks(card, i, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
/*
* (2) Connect card pre-linked dai_link to card list
*
* Connect all card pre-linked dai_link to *card list*.
* Here, (A) means from card pre-linked.
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
*/
for_each_card_prelinks(card, i, dai_link) {
ret = snd_soc_add_dai_link(card, dai_link);
...
}
...
/*
* (3) Probe binded component
*
* Each rtd has many components.
* Here probes each rtd connected components.
* rtd(A) in Image is the probe target.
*
* During this component probe, topology may add new dai_link to
* *card list* by using snd_soc_add_dai_link() which is
* used at (2).
* Here, (B) means from topology
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
* - dai_link(B)
* - dai_link(B)
*/
ret = soc_probe_link_components(card);
...
/*
* (4) Bind dai_link again
*
* Bind dai_link again for topology.
* Note, (1) used for_each_card_prelinks(),
* here is using for_each_card_links()
*
* This means from card list.
* As Image indicating, it has dai_link(A) (from card pre-link)
* and dai_link(B) (from topology).
* main target here is dai_link(B).
* soc_bind_dai_link() ignores already used
* dai_link (= dai_link(A))
*
* Image
*
* card card list
* - rtd(A) - dai_link(A)
* - rtd(A) - dai_link(A)
* - ... - ...
* - rtd(B) - dai_link(B)
* - rtd(B) - dai_link(B)
*/
for_each_card_links(card, dai_link) {
ret = soc_bind_dai_link(card, dai_link);
...
}
...
}
As you see above, it is doing very complex method.
The problem is binding dai_link via "card pre-linked" (= (1)) and
"topology added dai_link" (= (3)) are separated.
The code can be simple if we can bind dai_link when dai_link
is connected to *card list*.
This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sou3jnn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_is_dai_link_bound() check will be called both
*before* soc_bind_dai_link() (A), and
*under* soc_bind_dai_link() (B).
These are very verbose code. Let's remove one of them.
* static int soc_bind_dai_link(...)
{
...
(B) if (soc_is_dai_link_bound(...)) {
...
return 0;
}
...
}
static int snd_soc_instantiate_card(...)
{
...
for_each_card_links(...) {
(A) if (soc_is_dai_link_bound(...))
continue;
* ret = soc_bind_dai_link(...);
if (ret)
goto probe_end;
}
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87a79a3jns.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_init_dai_link() is needed to be called before soc_bind_dai_link().
int snd_soc_instantiate_card()
{
for_each_card_prelinks(...) {
(1) ret = soc_init_dai_link(...);
...
}
...
for_each_card_prelinks(...) {
(2) ret = soc_bind_dai_link(...);
...
}
...
for_each_card_links(...) {
...
(A) ret = soc_init_dai_link(...);
...
(B) ret = soc_bind_dai_link(...);
}
...
(1) is for (2), and (A) is for (B)
(1) and (2) are for card prelink dai_link.
(A) and (B) are for topology added dai_link.
soc_init_dai_link() is sanity check for dai_link, not initializing today.
Therefore, it is confusable naming. We can rename it as sanity_check.
And this check is for soc_bind_dai_link().
It can be more simple code if we can call it from soc_bind_dai_link().
This patch renames it to soc_dai_link_sanity_check(), and
call it from soc_bind_dai_link().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87d0e63joh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_init_dai_link() next to soc_bind_dai_link().
This is prepare for soc_bind_dai_link() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eeym3joq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set trigger order for FE DAI links to SND_SOC_DPCM_TRIGGER_POST
to trigger the BE DAI's before the FE DAI's. This prevents the
xruns seen on playback pipelines using the link DMA.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST
determine the order in which FE DAI and BE DAI are triggered.
In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is
triggered before the BE DAI and in the case of
SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before
the FE DAI. And this order remains the same irrespective of the
trigger command.
In the case of the SOF driver, during playback, the FW
expects the BE DAI to be triggered before the FE DAI during
the START trigger. The BE DAI trigger handles the starting of
Link DMA and so it must be started before the FE DAI is started
to prevent xruns during pause/release. This can be addressed
by setting the trigger order for the FE dai link to
SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger,
the FW expects the FE DAI to be triggered before the BE DAI.
Retaining the same order during the START and STOP commands,
results in FW error as the DAI component in the FW is still
active.
The issue can be fixed by mirroring the trigger order of
FE and BE DAI's during the START and STOP trigger. So, with the
trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be
trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME
and the BE DAI will be triggered first during the
STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order
set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered
first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands
and the FE DAI will be triggered first during the
SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same driver is reused for 3 different configurations, but the
driver will only be build if ApolloLake is selected.
Fix and make sure each device can work without dependencies on others
(useful for minimal configurations).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This option is only required with the Skylake platform driver, there
is no reason to have this option in machine drivers. This is
e.g. useless for SOF-based solutions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This option famously broke audio on Linus' laptop and the problem have
not been fixed.
Mark as DEPRECATED to avoid any ambiguity with distros.
Use SOF if you need HDaudio support w/ the DSP enabled, e.g. for DMIC
capture.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far we used select to use the relevant built-in/module options, but
this led to blurring layers between core and Intel Kconfigs.
Use def_tristate works just as well and removes Intel stuff from the code.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
updated solution to the problem reported with randconfig:
CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:
sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'
use def_trisate to propagate the right settings without select.
Fixes: f4df4e4042 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all possible options, despite existing warnings to
be careful. This leads to e.g. user reports that the HDaudio codec and
DMIC are not handled by SOF.
Add an explicit menu item to unlock developer options, and make them
dependent on CONFIG_EXPERT. Hopefully with this double-lock these
options will only be selected by developers.
GitHub issue: https://github.com/thesofproject/sof/issues/1885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all options blindly, which leads to confusion and
bug reports. SOF does not fully support Broadwell due to firmware
dependencies, the machine drivers can only support one option, and
UCM/topology files are still being propagated to downstream distros,
so make SOF on Broadwell an opt-in option that first require distros
to opt-out of existing defaults.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204237
Fixes: f35bf70f61 ('ASoC: Intel: Make sure BDW based machine drivers build for SOF')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some distros select all options blindly, which leads to confusion and
bug reports. Since SOF does not support Baytrail-CR for now, and
UCM/topology files are still being propagated to downstream distros,
make SOF on Baytrail an opt-in option that first require distros to
opt-out of existing defaults.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the retry argument for the hda_dsp_wait_d0i3c_done()
function and use the HDA_DSP_REG_POLL_RETRY_COUNT macro
directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Machine driver to enable
RT5682 on SSP0, DMIC, HDMI and
RT1011 AMP on SSP1 with
2 CH / 24 bit TDM Playback over 4 individual codecs and
4 CH / 24 bit Capture to provide feedback.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add match for CML m/c with RT1011 and RT5682
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When ASoC card instance is removed containing a HDA codec,
hdac_hda_codec_remove() may run in parallel with codec resume.
This will cause problems if the HDA link is freed with
snd_hdac_ext_bus_link_put() while the codec is still in
middle of its resume process.
To fix this, change the order such that pm_runtime_disable()
is called before the link is freed. This will ensure any
pending runtime PM action is completed before proceeding
to free the link.
This issue can be easily hit with e.g. SOF driver by loading and
unloading the drivers.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170635.26389-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no other code use the RT1011_INIT_REG_LEN definition,
except rt1011_reg_init().
Hence, we remove it and fix the typo.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115446.21108-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The !component->card->instantiated statement should remove in kcontrol.
It is no need to check the card->instantiated in kcontrol.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115401.20898-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_tplg_component_remove() is pair of snd_soc_tplg_component_load(),
and it is topology related cleanup function.
The driver which called _load() needs to call _remove() by its responsibility.
Today, skl-pcm and topology are the user, and these are calling both
_load() and _remove().
soc-core doesn't need to call it.
This patch remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fbdnwt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixup this warning
LINUX/sound/soc/codecs/rt5677-spi.c: In function ‘rt5677_spi_pcm_close’:
LINUX/sound/soc/codecs/rt5677-spi.c:114:30: warning: unused variable ‘rtd’ [-Wunused-variable]
struct snd_soc_pcm_runtime *rtd = substream->private_data;
^~~
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a79idajh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to implement HDMI/DP audio by using the common
snd-hda-codec-hdmi driver.
Change of codec driver affects user-space as the two
drivers expose different mixer controls. A new kernel
module option "use_common_hdmi" is added to user-space
to indicate which interface should be used. The default
driver can be selected via a Kconfig option.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Match the include guard define to actual filename. The source
directory now has an actual hda_dsp_common.h header, so the old
include guard may cause confusion.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
When snd-hda-codec-hdmi is used, the PCM device numbers are
parsed from card topology and passed to the codec driver.
This needs to be done at runtime as topology changes may
affect PCM device allocation.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Handle all HDA codecs using same logic, including HDMI/DP.
Call to snd_hda_codec_build_controls() is delayed for HDMI/DP HDA
devices. This is needed to discover the PCM device numbers as
defined in topology.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support three different use cases with rockchip_max98090 driver.
The three use cases:
- max98090 only: Current usage, where HDMI link is missing.
- HDMI only: Needed use case for veyron_mickey board.
- max98090 + HDMI: Ideal use case for veyron_jerry, veyron_minnie..etc.
The presence of max98090 is determined by the presence of
rockchip,audio-codec device property.
The presence of HDMI is determined by the presence of
rockchip,hdmi-codec device property.
Create different sound card based on the configuration.
Note that we keep max98090 only usage for backward compatibility.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-4-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Appearently the CONFIG_SND_SOC_SOF_KABYLAKE and CONFIG_SND_SOC_SOF_SKYLAKE
options are not present in Kconfig and 'struct snd_sof_dsp_ops sof_skl_ops'
is not declared in the code, too.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191028173329.29538-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Those strings are exposed to the user space as the
card name thus used in the GUIs. The common
standard is to avoid '_' here. The worst case
is 'sof-skl_hda_card' string.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191028164624.14334-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new implemented snd_sof_prepare() and snd_sof_complete() as the
power management callbacks for pci probing platforms.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system is entering into S0ix, the PCI device may transition to the
D0i3 substate instead of D3. In D0i3, some always-on functionality can
be enabled, such as acoustic event detection, voice activity detection
or hotwording. When an event is detected, the DSP firmware can wake-up
the device for a transition to D0 with an interrupt.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No set_power_state ops means that the platform doesn't support D0i3,
return -ENOTSUPP for the case.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable system wake up via IPC interrupt from DSP when the system is
suspending to the S0ix state, and disable it in the corresponding
resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During system suspend, the PM framework will freeze all applications and
the ALSA/ASoC core will suspend all RUNNING PCM streams.
However, D0ix-compatible PCM streams should keep the related pipelines
active in the DSP when the system is entering S0ix. The TRIGGER_SUSPEND
event is trapped in such cases to prevent the pipelines from being
stopped. Likewise, the TRIGGER_RESUME/START events should not affect the
pipeline state.
The SOF driver also triggers some DSP Firmware pipelines based on the
DAPM widgets power events. In such cases, we also ignore PRE_PMU and
POST_PMD events to keep the pipelines active.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the prepare() and complete() callbacks for power management,
initialize s0_suspend flag at prepare(), and reset it at complete().
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a suspend_ignored flag to snd_sof_pcm_stream that will be used to
decide if the corresponding FW pipeline should be kept active to perform
always on tasks when the system is entering the S0ix state.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For compact IPCs, we will send the IPC header/command via the HIPCIDR
register and the first 32bit payload via the HIPCIDD register, no
mailbox will be used.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The configuration for D0ix in FW is platform specific, let's do this and
send IPC in the platform set_power_state() ops.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On cAVS platforms, some IPCs are required to be sent via IPC registers
only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold
definition of those compact IPCs.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Memory windows could be powered off before receiving PM_GATE IPC reply
from FW, we can't read the mailbox to get reply.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parses the token from tplg file and store it to snd_sof_pcm_stream
d0i3_compatible flag, which can be used later for d0ix transition
management.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and
SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be
opened at low power d0i3 status or not.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the
stream can tolerate a transition to the D0i3 substate while opened (thus
seen as 'active' by pm_runtime).
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for apl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do
d0ix platform configuration updates.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding helper to implement setting dsp to d0i3 or d0i0 status, this will
be needed for driver D0ix support.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
D0i3 is a platform-defined substate of D0, so we need a
platform-specific callback in dsp_ops to handle the relevant
configurations.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add field d0_substate to struct snd_sof_dev to store the current DSP
D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or
D0I3.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.
This issue may also happen with trigger->fsl_esai_trigger_start.
So Add spin lock to lock those functions.
Fixes: 7ccafa2b38 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.
The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.
For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The first DMIC capture always fail (zero sequence data from PCM port)
after using DSP hotwording function (i.e. Google assistant).
This rt5514 codec requires to control mclk directly in the set_bias_level
function. Implement this function in machine driver to control the
ssp1_mclk clock explicitly could fix this issue.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:
sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
dma->dai.ops = &fsl_dma_ops;
^~~~~~~~~~~
Remove the usage to fix the build.
Fixes: 4ac85de997 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>
max98090 spec states that chip needs to be in turned-on state to supply
mic bias. Enable SHDN dapm widget along with MICBIAS widget to
actually turn on mic bias for proper headset button detection.
This is similar to cht_ti_jack_event in
sound/soc/intel/boards/cht_bsw_max98090_ti.c.
Note that due to ts3a227e reports the jack event right away before the
notifier is registered, if headset is plugged on boot, headset button
will not get detected until headset is unplugged and plugged. This is
still an issue to be fixed.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028095229.99438-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When non standard names are used it is possible that one of the directions
are not provided, thus the flags needs to be present to tell the core that
we have half duplex setup.
Fixes: 642aafea88 ("ASoC: ti: remove compat dma probing")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191028115207.5142-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_set_get_large_ctrl_data() there is a memory
leak in case an error. Release partdata if sof_get_ctrl_copy_params()
fails.
Fixes: 54d198d501 ("ASoC: SOF: Propagate sof_get_ctrl_copy_params() error properly")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027215330.12729-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the implementation of sof_dfsentry_write() memory allocated for
string is leaked in case of an error. Go to error handling path if the
d_name.name is not valid.
Fixes: 091c12e1f5 ("ASoC: SOF: debug: add new debugfs entries for IPC flood test")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20191027194856.4056-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are missing the 'CONFIG_' prefix when using the kernel configure item
SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1, here correct them.
Fixes: 43b2ab9009 ('ASoC: SOF: Intel: hda: Disable DMI L1 entry during capture')
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025221538.6668-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current position update is not precise enough for PulseAudio to
work reliably with the timer-based scheduling on Baytrail,
Cherrytrail, Broadwell.
Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that
the position is only reliable and updated during period_elapsed
events.
This will be reverted when the firmware provides a more accurate
position for those platforms.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.
This patch only moves the definitions and does not change any
functionality.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.
This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.
Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix bugs reported by kbuild test robot
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191024184026.183913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The allocation of rt5677_dsp can potentially fail and return null, so add
a null check and return -ENOMEM on a memory allocation failure.
Addresses-Coverity: ("Dereference null return")
Fixes: a0e0d13542 ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191024124610.18182-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add platform specific data for Kahlee project.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm conversion of kirkwood was incorrect; on removal, devm takes
effect after the "remove" function has returned. So, the effect of
the conversion was to change the order during remove from:
- snd_soc_unregister_component() (unpublishes interfaces)
- clk_disable_unprepare()
- cleanup resources
After the conversion, this became:
- clk_disable_unprepare() - while the device may still be active
- snd_soc_unregister_component()
- cleanup resources
Hence, it introduces a bug, where the internal clock for the device
may be shut down before the device itself has been shut down. It is
known that Marvell SoCs, including Dove, locks up if registers for a
peripheral that has its clocks disabled are accessed.
Fixes: f98fc0f815 ("ASoC: kirkwood: replace platform to component")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400
But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.
This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.
Fixes: 5e45a6fab3 ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191022185429.12769-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig, PCI ID and chip info for JSL platform.
The DSP only has 2 cores for this platform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Such traces should be extremely rare but extremely useful for debug.
Report errors for all calls to sdn_sof_dsp_read_poll_timeout(), but
only on negative values for consistency.
Add traces that enable each timeout to be uniquely identified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a ROM timeout is detected, we still stop the DMA but will return
the initial error should the DMA stop also fail.
Likewise the cleanup is handled regardless of the status, but we
return the initial error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=y,
below errors can be seen:
sound/soc/codecs/cros_ec_codec.o: In function `send_ec_host_command':
cros_ec_codec.c:(.text+0x534): undefined reference to `cros_ec_cmd_xfer_status'
cros_ec_codec.c:(.text+0x101c): undefined reference to `cros_ec_get_host_event'
This is because it will select SND_SOC_CROS_EC_CODEC
after commit 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV"),
but SND_SOC_CROS_EC_CODEC depends on CROS_EC.
Fixes: 2cc3cd5fdc ("ASoC: mediatek: mt8183: support WoV")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20191023063103.44941-1-maowenan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing of_node_put() for
rsnd_parse_tdm_split_mode()
rsnd_parse_connect_graph()
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fkyzx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.
Therefore set src and dst's DMA bus width to:
- [monaural case] data width
- [non-monaural case] 32bits (as prior applying the patch)
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below
rtdcom rtdcom rtdcom
component component component
rtd->component_list -> list -> list -> list ...
Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component
for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}
but usually, user want to get pointer from for_each_xxx is component
directly, like below.
for_each_rtd_component(rtd, rtdcom, component) {
...
}
This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When our call to get the external clock fails, we forget to clean up
the enabled internal clock correctly. Enable the clock after we have
obtained all our resources.
Fixes: 84aac6c79b ("ASoC: kirkwood: fix loss of external clock at probe time")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
For distributions, we need one place where we can decide
which driver will be activated for the auto-configation of the
Intel's HDA hardware with DSP. Actually, we cover three drivers:
* Legacy HDA
* Intel SST
* Intel Sound Open Firmware (SOF)
All those drivers registers similar PCI IDs, so the first
driver probed from the PCI stack can win. But... it is not
guaranteed that the correct driver wins.
This commit changes Intel's NHLT ACPI module to a common
DSP probe module for the Intel's hardware. All above sound
drivers calls this code. The user can force another behaviour
using the module parameter 'dsp_driver' located in
the 'snd-intel-dspcfg' module.
This change allows to add specific dmi checks for the specific
systems. The examples are taken from the pull request:
https://github.com/thesofproject/linux/pull/927
Tested on Lenovo Carbon X1 7th gen.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022174313.29087-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
soc_remove_link_components() will be called from
soc_cleanup_card_resources(). This patch removes duplicate call.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5664lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.
static int dpcm_prune_paths(...)
{
...
(1) for_each_dpcm_be(fe, stream, dpcm) {
...
^ widget = dai_get_widget(...);
|
(A) if (widget && widget_in_list(...))
| (a) continue;
v
^ (2) for_each_rtd_codec_dai(...) {
| widget = dai_get_widget(...);
(B)
| if (widget && widget_in_list(...))
v (b) continue;
}
...
Fixes: 2e5894d737 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch implements a PCM interface for streaming hotword
phrases over SPI. Userspace can open the PCM device at anytime.
The stream is blocked when no hotword is detected. The mic
audio buffer on the DSP is a ~128KByte ring buffer that holds
~4sec of audio samples recorded from the DMIC (S16_LE, mono,
16KHz). After a hotword is detected, previous 2 seconds of audio
(containing the detected hotword) is streamed first, then live
capture continues until userspace closes the PCM stream.
When transferring, copy one period at a time then call
snd_pcm_period_elapsed(). This reduces the latency of transferring
the initial ~2sec of audio after hotword detect since audio samples
are available for userspace earlier.
Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191018200449.141123-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Get EC codec's capabilities.
2. Get and set SHM address if any.
3. Transmit language model to EC codec if needed.
4. Start to read audio data from EC codec if receives host event.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20191019143504.1.I5388b69a7a9c551078fed216a77440cee6dedf49@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8916 supports an earpiece as another (small) speaker.
The earpiece is routed through RX MIX1 similarly to
the headphones, except that RDAC2 MUX is set to RX1.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the PM8916 Hardware Register Description,
CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL)
to switch between RX1 (0) and RX2 (1). It is not possible to
disable it entirely to achieve the "ZERO" state.
However, at the moment the "RDAC2 MUX" mixer defines three possible
values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO"
actually configures it to RX1. Setting the mixer to "RX1" has
(seemingly) no effect.
Remove "ZERO" and replace it with "RX1" to fix this.
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl2tmNgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Mp7B/9TN2O39/jS2Rjg7jUtHHqpBSv2a4Tq
oyJ6l69C2aeS2HLqJc5PkFRXw2C2pOdMdCjY7XXNC3M02zIC9Eh5b2Y2FlYPhMUz
LMHVZ69IU0vMgW/9AWi140h7h0pDoNzqagsIpzm1+UDkk0ITH7NORUyc4BKCLJiG
MzgWtExa7MiakkriS23LPPNDspx05aRKul+wB20GBKCB1W5LjBDiiH5JUmyx9C23
Gto04TrDbJrRmQeVcJJfuzWQRcQVhocdjqqjI5lrvYPqB8eawBIN+x/DHBkjnmBw
JOZaQqAlOmCV5sJhkX/KW9nE+SqELPVMDE1LgNIQXspxKL3vXX1OqQ7i
=EmvC
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
There is no need to keep a pointer to the platform device. Currently there are
no users of it directly, and if there will be in the future we may restore it
from pointer to the struct device.
Convert all users at the same time.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191018105429.82782-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read max DMIC gain from EC codec instead of DTS. Also removes the
dt-binding of max-dmic-gain.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191017213539.05.Id4657c864d544634f2b5c1c9b34fa8232ecba44d@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
aic32x4_set_dai_sysclk misses a check for devm_clk_get and may miss the
failure.
Add a check to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191018081448.8486-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor by the following items:
- reformat copyright declaration
- use more specific name "i2s rx"
- use verbose symbol names to separate namespaces
- make some short functions inline
- remove unused TDM-related code
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-By: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20191014180059.02.I43373b9a66dbb70196b3f216b3aa86111c410836@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
All the kcontrol put() functions are currently returning 0 when
successful. This does not go well with alsamixer as it does
not seem to get notified on SND_CTL_EVENT_MASK_VALUE callbacks
when values change for (some of) the sof kcontrols.
This patch fixes that by returning true for volume, switch
and enum type kcontrols when values do change in put().
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191018123806.18063-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit below, adds a call to sysclk callback on shutdown.
This introduces a regression in stm32 SAI driver, as some clock
services are called twice, leading to unbalanced calls.
Move processing related to mclk from shutdown to sysclk callback.
When requested frequency is 0, assume shutdown and release mclk.
Fixes: 2458adb8f9 ("SoC: simple-card-utils: set 0Hz to sysclk when shutdown")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191018082040.31022-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_audio_probe misses a check for devm_clk_get and may cause problems.
Add a check for it to fix the bug.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191017025044.31474-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike other format-related DAI parameters, rdai->bit_clk_inv flag
is not properly re-initialized when setting format for new stream
processing. The inversion, if requested, is then applied not to default,
but to a previous value, which leads to SCKP bit in SSICR register being
set incorrectly.
Fix this by re-setting the flag to its initial value, determined by format.
Fixes: 1a7889ca8a ("ASoC: rsnd: fixup SND_SOC_DAIFMT_xB_xF behavior")
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Cc: stable@vger.kernel.org # v3.17+
Signed-off-by: Junya Monden <jmonden@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191016124255.7442-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-28-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Typically, the r0 (calibration data) and temperature were measured in the factory.
This information is written into the non-volatile area
where keeps data whether factory reset or OS update.
In Chromium OS case, the coreboot will read the info from VPD and create
the device property for each rt1011.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-By: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191016085845.11672-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify the memcpy/be32_to_cpu() code by simply using
get_unaligned_be32() throughout and makes the code nicer
to look at.
This fixes the following warnings from sparse:
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:62:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:69:15: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:72:18: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:91:17: warning: cast to restricted __be64
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:108:29: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
sound/soc/codecs/wm8958-dsp2.c:120:26: warning: cast to restricted __be32
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191016120149.5860-1-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
fmt 0 is perfectly valid (PCM3168A_FMT_I2S). Remove the return in case
fmt == 0.
Fixes: ("ASoC: pcm3168a: Use fixup instead of constraint for channels and formats")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191015090037.23271-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt5663 and rt5514 needs mclk/sclk early to synchronize its internal
clocks.
Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571070480-25666-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When LEDS_TRIGGER_AUDIO is m and SND_SOC_SOF is y,
sound/soc/sof/control.o: In function `snd_sof_switch_put':
control.c:(.text+0x587): undefined reference to `ledtrig_audio_set'
control.c:(.text+0x593): undefined reference to `ledtrig_audio_set'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191014091308.23688-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_parse_tokens() returns a value that is checked on every call
except for LED tokens, fix with explicit test.
Detected with cppcheck warning:
sound/soc/sof/topology.c:973:6: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
ret = sof_parse_tokens(scomp, &scontrol->led_ctl, led_tokens,
^
Fixes: 5d43001ae4 ("ASoC: SOF: acpi led support for switch controls")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191011164312.7988-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address cppcheck warning:
sound/soc/sof/topology.c:2322:6: style: Condition 'pcm' is always true
[knownConditionTrueFalse]
if (pcm) {
^
sound/soc/sof/topology.c:2311:6: note: Assuming that condition '!pcm'
is not redundant
if (!pcm)
^
sound/soc/sof/topology.c:2322:6: note: Condition 'pcm' is always true
if (pcm) {
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191011164312.7988-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc warn about this:
sound/soc/fsl/fsl_mqs.c:146:1: warning:
static is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20191011143538.15300-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When STM32 SPDIFRX is in sync state, allow multiple
synchro attempts, instead of exiting on first unsuccessful
trial. This is useful when spdif signal is not immediately
available on input. This also allows Pulseaudio to check
iec capture device availability when no signal is present.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191011084816.14279-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ESAI parameters are read for topology file, packed into
sof_ipc_dai_esai_parms struct and then sent to DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently sof doesn't support acpi leds with mute switches. So implement
acpi leds following quite shamelessly existing HDA implementation by
Takashi Iwai.
Mute leds can be enabled in topology by adding led and direction token
in switch control private data.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add debug parameter for snd-sof-pci.
One of the usages for this debug parameter to disable pm_runtime,
which can be useful for platform bringup, or keep the parent device
active while enabling pm_runtime for child devices (e.g. with
SoundWire or MFD). This can also be useful to measure suspend-resume
latencies or child devices.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add debug parameter for snd-sof-acpi.
One of the usages for this debug parameter to disable pm_runtime,
which can be useful for platform bringup, or keep the parent device
active while enabling pm_runtime for child devices (e.g. with
SoundWire or MFD). This can also be useful to measure suspend-resume
latencies or child devices.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 64ca9d9fcb.
The workaround is no longer needed after configuring HDAC
bus with sync_write=1.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently sof pga element supports only 1 kcontrol and you can't create
for example a mixer element with combined volume slider and mute switch.
So enable sof pga to have more than 1 kcontrol associated with it. Also
check for possible NULL tlv pointer as switch element might not have it.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Align SOF HDA implementation with snd-hda-intel driver and enable
sync_write flag for all supported Intel platforms in SOF. When set,
a sync is issued after each verb write.
Sync after write has helped to overcome intermittent delays in
system resume flow on Intel Coffee Lake systems, and most recently
probe errors related to the HDMI codec on Ice Lake systems.
Matches the snd-hda-intel driver change done in commit 2756d9143a
("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips").
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the 8 channel PDM-to-I2S/TDM converter. The
ADAU7118 converts four stereo pulse density modulation (PDM) bitstreams
into one pulse code modulation (PCM) output stream. The source for the PDM
data can be eight microphones or other PDM sources. The PCM audio data is
output on a serial audio interface port in either inter-IC serial (I2S) or
time domain multiplexed (TDM) format.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191010074234.7344-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MIX2 path on RX1/2 which take IIR1 and
IIR2 as inputs.
Without this patch sound card fails to intialize with below warning:
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1
ASoC: no sink widget found for RX1 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1
ASoC: no sink widget found for RX2 MIX2 INP1
ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191009111944.28069-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 67ad656bdd ("ASoC: jz4740: Use
of_device_get_match_data()"), the match local variable is unused and the
compiler rightly warns.
sound/soc/jz4740/jz4740-i2s.c: In function 'jz4740_i2s_dev_probe':
sound/soc/jz4740/jz4740-i2s.c:500:29: warning: unused variable 'match' [-Wunused-variable]
500 | const struct of_device_id *match;
Drop it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <alsa-devel@alsa-project.org>
Fixes: 67ad656bdd ("ASoC: jz4740: Use of_device_get_match_data()")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20191008235212.228856-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_rtdcom_lookup() will be removed.
It is used at fsl_dma_isr(), but it is just for dev_err(dev..).
rtd->dev is very enough for it.
This patch replace component->dev to rtd->dev
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5n90cn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Keyon Jie