The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the merge commit
and on the AsahiLinux wiki.
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pBZy
-----END PGP SIGNATURE-----
Merge tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Apple M1 platform support from Arnd Bergmann:
"The Apple M1 is the processor used it all current generation Apple
Macintosh computers. Support for this platform so far is rudimentary,
but it boots and can use framebuffer and serial console over a special
USB cable.
Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe)
is work in progress but was not ready in time.
A very detailed description of what works is in the commit message of
commit 1bb2fd3880 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the
AsahiLinux wiki"
Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/
* tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
asm-generic/io.h: Unbork ioremap_np() declaration
arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree
dt-bindings: display: Add apple,simple-framebuffer
arm64: Kconfig: Introduce CONFIG_ARCH_APPLE
irqchip/apple-aic: Add support for the Apple Interrupt Controller
dt-bindings: interrupt-controller: Add DT bindings for apple-aic
arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h
of/address: Add infrastructure to declare MMIO as non-posted
asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np
arm64: Implement ioremap_np() to map MMIO as nGnRnE
docs: driver-api: device-io: Document ioremap() variants & access funcs
docs: driver-api: device-io: Document I/O access functions
asm-generic/io.h: Add a non-posted variant of ioremap()
arm64: arch_timer: Implement support for interrupt-names
dt-bindings: timer: arm,arch_timer: Add interrupt-names support
arm64: cputype: Add CPU implementor & types for the Apple M1 cores
dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles
dt-bindings: arm: apple: Add bindings for Apple ARM platforms
dt-bindings: vendor-prefixes: Add apple prefix
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=SauY
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"The usual set of defconfig updates, enabling newly added drivers.
There are platform updates for at91, omap, ux500 and qcom platforms,
and a number of changes to the arm64 defconfig"
* tag 'arm-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: configs: qcom_defconfig: Reduce CMA size to 64MB
ARM: configs: qcom_defconfig: Enable GLINK SMEM driver
ARM: configs: qcom_defconfig: Enable SDX55 interconnect driver
ARM: configs: qcom_defconfig: Enable Q6V5_PAS remoteproc driver
ARM: configs: qcom_defconfig: Enable CPUFreq support
ARM: configs: qcom_defconfig: Enable SDX55 A7 PLL and APCS clock driver
ARM: configs: qcom_defconfig: Enable APCS IPC mailbox driver
ARM: configs: Remove REGULATOR_USERSPACE_CONSUMER
ARM: configs: ux500: Update for new drivers
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
ARM: configs: at91: Modernize UBI defconfig part
ARM: configs: at91: Add USB Video webcam class
ARM: configs: at91: Add mtd tests as modules
ARM: configs: at91: sama5: Add audio MIKROE PROTO board
ARM: configs: at91: sama5: Enable LAN78XX as module
ARM: configs: at91: sama5: PIOBU as built-in
ARM: configs: at91: sama5: MCP16502 regulator as built-in
ARM: configs: at91: sama5: enable the Hantro G1 engine
ARM: configs: at91: sama5: update with savedefconfig
...
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
-----BEGIN PGP SIGNATURE-----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=3aF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpate for 5.13
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
* tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC
Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
-----BEGIN PGP SIGNATURE-----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=g3jG
-----END PGP SIGNATURE-----
Merge tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
Enable option to boot MediaTek based chromebook (mt8173 and mt8183) with defconfig
* tag 'v5.12-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks
arm64: defconfig: Allow mt8173-based boards to boot from usb
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj9KcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5o5wgAhADJ5eUxUD1yrgU7P8aa/WY7QjLD
XluMFtpAaI9cXAXX3cy/4JpCb9tTXMisyvG/Kr9bt+PVQOHK892U1nybdkX+VBAC
CNTfIbHYKxHE3CdkjGqIk4CA+vx+wH151bwZThWrkiBAE5Oaqcb3aVmmcFGLUvfr
MB1JAW8dsTk3+0bmYcpRtMfFxPWoSDtgGtAQANqpROJGlJ5cv/DlDTmqbgsu8Yc4
pyjBeeKkJTc9bXw2LxVHS3H7Ozew4rJ0hEdsYWwU7emYVQzu2di9kwfnMkzDZS7F
Zxifjyen4TVWqFgxUQ3dng8B3d2tQvs6ini3b1Q5fLe5lkHTPWunIuMpAQ==
=FfMm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.13:
It includes a number of arm64 defconfig update for i.MX8 devices
support. The following ones might deserve some notes.
- Although Hantro decoder driver are sitting in staging, people already
find it's quite useful on i.MX8M devices.
- i.MX PCIe driver has no option for module build.
- REALTEK_PHY becomes a built-in driver, because it's used on quite some
i.MX8 reference boards where people want to boot via NFS.
* tag 'imx-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: configs: enable FlexTimer alarm timer
arm64: configs: Select REALTEK_PHY as built-in
arm64: configs: Enable PCIe support for imx8mq boards
arm64: defconfig: Enable the Hantro decoder
arm64: defconfig: add imx8qm pinctrl support
arm64: defconfig: Enable wm8960 audio driver.
arm64: defconfig: Enable asoc simple mux
arm64: defconfig: Enable devfreq support for i.MX8MQ
Link: https://lore.kernel.org/r/20210331041019.31345-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are some Mediatek based Chromebooks supported in the kernel. Enable the
required config options to have the panel display working on both devices.
This was tested on the ACER Chromebook R13 (MT8173) and the Lenovo
Ideapad Duet (MT8183), but should also enable display support for similar
devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210331090659.4169966-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This driver is used on Layerscape SoCs to wake up the system from
standby. It works in conjunction with the RCPM driver. The latter is
only available as a builtin.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the i.MX8MP EVK board there is a RTL8211 EThernet PHY and
a typical use case is to boot via NFS. In this case the Ethernet
PHY driver needs to be built-in, so select the driver as built-in
by default.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable in defconfig two Intel ARM64 architectures: the eASIC N5X SoCFPGA
and Keem Bay SoC. This allows compile coverage when building default
config.
For the N5X (and Agilex) enable also DesignWare SPI controller in MMIO.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Enable PCI_IMX6 to get PCI support for imx8mq boards like imx8mq-evk,
imx8mq-kontron-pitx-imx8m and imx8mq-zii-ultra.
The driver only has build-in support and cannot be compiled as module.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Hantro decoder driver so it can be enabled by
default on i.MX8M and Rockchip platforms.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've had DEBUG_INFO enabled for arm64 defconfigs since the initial
commit. This is probably not that frequently used but substantially
inflates the size of the build tree and amount of I/O needed during the
build. This was causing issues with storage usage in some automated CI
environments which don't expect defconfigs to be quite this big, and
generally increases the resource consumption for both them and people
doing local builds. The main use case for the debug info is decoding
things with scripts/faddr2line but that doesn't need the full
DEBUG_INFO, DEBUG_INFO_REDUCED is enough for it, so enable that by
default.
Without this patch my build tree is 6.8G, with it the size drops to 2G
(smaller than the 6.4G for allmodconfig!).
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210304174407.17537-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Except MX8QM pinctrl driver is missing, all other necessary drivers
for a booting are reused from MX8QXP which are already enabled
in defconfig.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This driver is used by the Nitrogen8m Mini SBC.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to model the mic input mux on the Librem 5 devkit.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the Qualcomm SM8350 TLMM pinctrl and GCC clock drivers. They need
to be builtin to ensure that the UART is allowed to probe before user
space needs a console.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210306021021.1173860-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
As usual, a number of additional device drivers that were added
to the kernel are now enabled in the respective configuration
files. A few of the files get updated to match the current
Kconfig files for removed or renamed options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=9G1K
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAd1GIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVktB/9L6zZzqTK7IIPn9XLXVYEP8Am6+nfsK1pZ
YGE5xrOaLhE3t5Kpq202xBDBkBId0poU5o6TW+QZHnSbS2uUEh88RpqE0O/Ozagz
cES+owdGcF+rPaRzghD91ESyumH9ys2rEoy8PFxl6BeHPggGwTRlCeCu2UPaUqbz
pxdoT6ySkc61Waf1K8dMgMl4Up3Tkx2u8kMSxvsru3GoO7K+43nB/6WyTsfD/y2b
q1gZUN2x9/HHFjPH76AFVVJ97DU7KtW3z9X4utn41uxSGspQWJXp/6Y5FbdahMRp
dEvy4AyAMMuzkgQgmlpmGKSpk9ZKPKuRb9n2DKTJWwia94SHEbqx
=0bTQ
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable REGULATOR_MP8859 - the main power supply for one Rockchip board.
* tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable REGULATOR_MP8859
Link: https://lore.kernel.org/r/4622596.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmAbowwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4U5gf+PPpo0Tc8ys0z85tMxh3Yzk7L9jMG
MXIsD4dWjWhZZJV6oWH4HYxuQjqvrYbcprdrdeip/q//S0ch8farB2yft5E2+4el
RhqSig5Y0uySgVg/lJWtDSI4x5E7m0IMJBMydBdV0d/S+lXOXagKNNS4HgB7HWX9
DCPct6Img1RGcAFWw2dAaDZr5WHvrL28bA72SFBaSVh33bXjwoccl+p4rwCdHB24
OTVLHlpiPKo5gO7WxtQnGQuyzDpNstoLPQCfbOyDa0rS+eAA7o/CqaaU2o2Zshw/
hzs/xJiX1sMrRQ0lO7Atl98vYF/oUFlWAeBcIj7TCSz90nLus0NuojUD1g==
=Nud0
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig change for 5.12:
- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable PF8x00 as builtin
arm64: defconfig: Enable vibra-pwm
arm64: defconfig: Enable Broadcom BCM54140 PHY
arm64: defconfig: Enable interconnect for imx8mq
arm64: defconfig: Enable PCA9532 support
arm64: defconfig: Enable rv3028 i2c rtc driver
arm64: defconfig: Enable Librem 5 devkit components
ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
arm64: defconfig: Enable WM8962
Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
-----BEGIN PGP SIGNATURE-----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=Xdw5
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for 5.12
This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.
* tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8250 audio config
arm64: defconfig: enable Lontium LT9611UXC bridge driver
arm64: defconfig: enable display clock controller on sm8250
arm64: defconfig: Enable TMPFS Posix ACL
arm64: defconfig: Enable HID multitouch
Link: https://lore.kernel.org/r/20210204051956.388355-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the RT5659 audio codec driver. Jetson AGX Xavier has RT5658 codec
which is compatible with this driver. This enables user to test external
audio.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Bard Liao <bardliao@realtek.com>
- build DEVAPC as a module
-----BEGIN PGP SIGNATURE-----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=gUHF
-----END PGP SIGNATURE-----
Merge tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig
- build PMIC wrapper as a module
- build DEVAPC as a module
* tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
Link: https://lore.kernel.org/r/aa5c6673-f018-00d3-42da-46a4976d8ef7@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The haptic motor for the Librem 5 uses this.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
-----BEGIN PGP SIGNATURE-----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=DQAs
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 defconfig fixes for v5.11
Devicetree patches for SDM845 introduced in v5.11 requires the
platform's interconnect driver to be buildin, or the kernel will fail to
provide a valid console when we hit userspace.
* tag 'qcom-arm64-defconfig-fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Make INTERCONNECT_QCOM_SDM845 builtin
Link: https://lore.kernel.org/r/20210125232412.642834-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit enables Tegra audio graph card driver which is based on
the generic audio-graph card driver. This is intended to be used
on platforms based on Tegra210 and later chips.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the Tegra SoC Thermal driver that is used by Tegra132 and
Tegra210 platforms to be built as a module by default for ARM64 builds.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The i2c-hid driver has been split in two. Let's enable both halves.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Enable support for the QuadPHY on the Kontron K-Box A-230-LS. Enable
the driver as a module.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable lt9611uxc driver for Lontium DSI to HDMI bridge found on Qualcomm
RB5 Robotics platform. Enable this driver to get display working on this
platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151827.4019213-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the display clock controller on Qualcomm SM8250,
needed in order to get the display working. This driver provides
power-domains and as such should not be compiled as a module.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201228151225.4018477-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable INTERCONNECT_IMX8MQ in order to make interconnect more widely
available.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable rv3028 i2c rtc driver as module. It is populated on
phyBOARD-Pollux-i.MX8M Plus.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.
This enables drivers for the following hardware components that aren't
yet enabled in defconfig:
- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem
- NXP PTN5110HQZ usb-c controller
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
RK3399 boards like ROC-RK3399-PC is using MP8859 DC/DC converter
for 12V supply.
roc-rk3399-pc initially used 12V fixed regulator for this supply,
but the below commit has switched to use MP8859.
commit <1fc61ed04d309b0b8b3562acf701ab988eee12de> "arm64: dts: rockchip:
Enable mp8859 regulator on rk3399-roc-pc"
So, enable by default on the defconfig.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200731160324.142097-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Zynqmp Ultrascale clock controller generates clocks for peripherals
by default. So enable this clock driver for ZynqMP platforms.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20201209021416.1017790-1-quanyang.wang@windriver.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Linus Torvalds