Certain state flags bit combinations are not checked and not handled
correctly. Plus, do not log a normal underrun situation where there is
no frame drop.
Link: https://lore.kernel.org/r/20200226224022.24518-17-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
T10-PI and FC-NVMe are not mutually exclusive. This patch removes
restrictions where if FC-NVMe is enabled T10-PI defaults to disabled.
Link: https://lore.kernel.org/r/20200226224022.24518-16-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For N2N, fc_port struct is created during report id acquisition. At
later time, the loop resync (fabric, n2n, loop) would trigger the rest
of the login using the created fc_port struct. The loop resync logic
can trigger another fc_port allocation if the 1st allocation was not
able to execute. This patch prevents the 2nd allocation trigger.
Link: https://lore.kernel.org/r/20200226224022.24518-15-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NPIV re-enable code was blocked after FW had been initialized. The
blocking check was too broad. Reduce the check to make sure if FW is
initialized or not.
Link: https://lore.kernel.org/r/20200226224022.24518-14-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
RPD information failed to display by switch cli command. This is
caused by driver failure to properly format RDP response data with
data descriptor to allow switch to parse it correctly.
Link: https://lore.kernel.org/r/20200226224022.24518-13-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For single port 28XX adapter, the second core can still run in the
background. The flash semaphore can be held by the non-active core.
This patch tell MPI FW to check for this case and clear the semaphore
from the non-active core.
Link: https://lore.kernel.org/r/20200226224022.24518-12-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Per FW request, MB 1-7 should be logged for 8002 error.
Link: https://lore.kernel.org/r/20200226224022.24518-11-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
commit e4e3a2ce95 ("scsi: qla2xxx: Add ability to autodetect SFP
type") takes a heavy handed approach to BPM (Buffer Plus Management)
enablement:
1) During hardware initialization, if an LR-capable transceiver is
recognized, the driver schedules a disruptive post-initialization
chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the
firmware. This chip-reset will result in (short-term) path-loss to
all fc-rports and their attached SCSI devices.
2) LR-detection is triggered during any link-up event, resulting in a
refresh and potential chip-reset
Based on firmware-team guidance, upon LR-capable transceiver
recognition, the driver's hardware initialization code will now
re-execute firmware with the new BPM settings, then continue on with
driver initialization. To address the second issue, the driver
performs LR-capable detection upon the driver receiving a
transceiver-insertion asynchronous event from firmware. No short-term
path loss is needed with this new semantic.
Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes issue where current and original exchanges count
were swapped for intiator and targets.
Also fix IOCB count for current and original which were swapped.
Link: https://lore.kernel.org/r/20200226224022.24518-9-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There's no point checking flags.disable_msix_handshake in the
interrupt handler hot-path. Instead perform the check during
queue-pair instantiation and use the proper interrupt handler.
Link: https://lore.kernel.org/r/20200226224022.24518-8-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Andrew Vasquez <andrewv@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch ensures flash updates API calls return possible failure
status through BSG interface to the application.
Link: https://lore.kernel.org/r/20200226224022.24518-7-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch improved message for Secure Flash support. No
functionality has been changed.
Link: https://lore.kernel.org/r/20200226224022.24518-6-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes issue where incorrect flag was used for sending
switch commands.
Link: https://lore.kernel.org/r/20200226224022.24518-5-hmadhani@marvell.com
Fixes: e8c72ba51a ("[SCSI] qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports")
Fixes: a4239945b8 ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch uses generic firmware update options for FCoE based
adapters as well to reduce code duplication.
Link: https://lore.kernel.org/r/20200226224022.24518-4-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves ql2xrdpenable check earlier to avoids setting
fw_option once again before exiting qla24xx_update_fw_options.
Link: https://lore.kernel.org/r/20200226224022.24518-3-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch allows sparse to verify the endianness of the arguments passed
to make_handle().
Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following sparse warnings:
drivers/scsi/qla2xxx/qla_mbx.c:120:21: warning: restricted pci_channel_state_t degrades to integer
drivers/scsi/qla2xxx/qla_mbx.c:120:37: warning: restricted pci_channel_state_t degrades to integer
>From include/linux/pci.h:
enum pci_channel_state {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
Link: https://lore.kernel.org/r/20200220043441.20504-4-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of changing endianness in-place, write the data in CPU endian
format in another buffer and copy that buffer back. This patch does not
change any functionality but silences some sparse endianness warnings.
Link: https://lore.kernel.org/r/20200220043441.20504-3-bvanassche@acm.org
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the SCSI core does not reuse the tag of the SCSI command that is
being aborted by .eh_abort() before .eh_abort() has finished it is not
necessary to check from inside that callback whether or not the SCSI
command has already completed. Instead, rely on the firmware to return an
error code when attempting to abort a command that has already
completed. Additionally, rely on the firmware to return an error code when
attempting to abort an already aborted command.
In qla2x00_abort_srb(), use blk_mq_request_started() instead of
sp->completed and sp->aborted.
Link: https://lore.kernel.org/r/20200220043441.20504-2-bvanassche@acm.org
Cc: Martin Wilck <mwilck@suse.com>
Cc: Quinn Tran <qutran@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is a spelling mistake in a lpfc_printf_vlog info message. Fix it.
[mkp: fix spelling mistake in commit description]
Link: https://lore.kernel.org/linux-scsi/20200221154841.77791-1-colin.king@canonical.com
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann inadvertently typoed these in d320a9551e and 64cbfa96551a;
they seem to be the cause of
https://bugzilla.redhat.com/show_bug.cgi?id=1801353 , invalid SCSI commands
when udev tries to query a DVD drive.
[arnd] Found another instance of the same bug, also introduced in my
compat_ioctl series.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801353
Link: https://lore.kernel.org/r/20200219165139.3467320-1-arnd@arndb.de
Fixes: c103d6ee69 ("compat_ioctl: ide: floppy: add handler")
Fixes: 64cbfa9655 ("compat_ioctl: move cdrom commands into cdrom.c")
Fixes: d320a9551e ("compat_ioctl: scsi: move ioctl handling into drivers")
Bisected-by: Chris Murphy <bugzilla@colorremedies.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ch_mutex() was introduced with a mechanical conversion, but as we now have
correct locking we can remove it altogether.
Link: https://lore.kernel.org/r/20200213153207.123357-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The 'ch' device node is created before the configuration is being read in,
which leads to a race window when ch_open() is called before that.
To avoid any races we should be taking the device mutex during
ch_readconfig() and ch_init_elem(), and also during ch_open().
That ensures ch_probe is finished before ch_open() completes.
Link: https://lore.kernel.org/r/20200213153207.123357-3-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SCSI device is required to be present during ch_probe() and ch_open().
But the SCSI device itself is only checked during ch_open(), so it's anyones
guess if it had been present during ch_probe(). And consequently we can't
reliably detach it during ch_release(), as ch_remove() might have been
called first. So initialize the changer device during ch_probe(), and take
a reference to the SCSI device during both ch_probe() and ch_open().
[mkp: fixed checkpatch warning]
Link: https://lore.kernel.org/r/20200213153207.123357-2-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The block layer generic blk_revalidate_disk_zones() checks the validity of
zone descriptors reported by a disk using the blk_revalidate_zone_cb()
callback function executed for each zone descriptor. If a ZBC disk reports
invalid zone descriptors, blk_revalidate_disk_zones() returns an error and
sd_zbc_read_zones() changes the disk capacity to 0, which in turn results
in the gendisk structure capacity to be set to 0. This all works well for
the first revalidate pass on a disk and the block layer detects the
capactiy change.
On the second revalidate pass, blk_revalidate_disk_zones() is called again
and sd_zbc_report_zones() executed to check the zones a second time.
However, for this second pass, the gendisk capacity is now 0, which results
in sd_zbc_report_zones() to do nothing and to report success and no
zones. blk_revalidate_disk_zones() in turn returns success and sets the
disk queue chunk_sectors limit with zero as no zones were checked, causing
a oops to trigger on the BUG_ON(!is_power_of_2(chunk_sectors)) in
blk_queue_chunk_sectors().
Fix this by using the sdkp capacity field rather than the gendisk capacity
for the report zones loop in sd_zbc_report_zones(). Also add a check to
return immediately an error if the sdkp capacity is 0. With this fix,
invalid/buggy ZBC disk scan does not trigger a oops and are exposed with a
0 capacity. This change also preserve the chance for the disk to be
correctly revalidated on the second revalidate pass as the scsi disk
structure capacity field is always set to the disk reported value when
sd_zbc_report_zones() is called.
Link: https://lore.kernel.org/r/20200219063800.880834-1-damien.lemoal@wdc.com
Fixes: d41003513e ("block: rework zone reporting")
Cc: Cc: <stable@vger.kernel.org> # v5.5
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes:
- qla2x00_issue_iocb_timeout will now return if chip is down
- only check for sp->qpair in abort handling
Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For ISP28xx, use 28xx call to retrieve active FW region.
Link: https://lore.kernel.org/r/20200212214436.25532-21-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add port name in the messages file to help debugging of Login/Logout IOCBs
Link: https://lore.kernel.org/r/20200212214436.25532-20-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ths patch fixes MBX in-direction for setting right bits for
qla2x00_echo_test()
Link: https://lore.kernel.org/r/20200212214436.25532-19-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes loopback and echo test options.
Link: https://lore.kernel.org/r/20200212214436.25532-18-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This takes care of big endian architectures.
Link: https://lore.kernel.org/r/20200212214436.25532-17-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes RDP length in case when driver needs to reduce length of
RDP response
Link: https://lore.kernel.org/r/20200212214436.25532-16-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch reduces RDP response payload length, if requesting port is a
domain controller (sid 0xfffc01) and fw is earlier than 8.09.00 and fw is
not 8.05.65 then limit the RDP response payload length to maximum of 256
bytes by terminating the response just before the optical element
descriptor.
Link: https://lore.kernel.org/r/20200212214436.25532-15-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds deferred queue for processing aborts and RDP in the driver.
Link: https://lore.kernel.org/r/20200212214436.25532-14-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch does the following to improve RDP processing:
- Rename field port_id to d_id in ELS and PUREX iocb structs to match FW
spec.
- Remove redundant comments from ELS and PUREX iocb structs.
- Refactor fields in ELS iocb struct for error subcode common access.
- Properly use error subcode fields in rdp processing routine.
- Add print logs for alloc failure in purex rdp processing routine.
Link: https://lore.kernel.org/r/20200212214436.25532-13-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch correctly displays port speed capability and current speed for
RDP command.
Link: https://lore.kernel.org/r/20200212214436.25532-12-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During Link up phase and Data rate MBX command response, print message
indicating FCE is enabled.
Link: https://lore.kernel.org/r/20200212214436.25532-11-hmadhani@marvell.com
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds support for extended FDMI commands and cleans up code to
reduce duplication.
Link: https://lore.kernel.org/r/20200212214436.25532-10-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch provides separate module parameter ql2xrdpenable to turn on/off
RDP capability in the driver. However, if ql2xsmartsan parameter is
enabled, it will also turn on ql2xfdmienable parameter since it is required
for RDP to work.
Link: https://lore.kernel.org/r/20200212214436.25532-9-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch adds RDP command support in the driver. With the help of new
ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command
to switch and will be able to receive various diagnostic data.
Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch prepares code for implementing Vendor specific extended FDMI/RDP
commands. It also addes support for MBC_GET_PORT_DATABASE and
MBC_GET_RNID_PARAMS commands.
Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes endian warning for fc_host_stats.
Link: https://lore.kernel.org/r/20200212214436.25532-6-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace the EFI runtime services check with one that tells us whether
EFI GetVariable() is implemented by the firmware.
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This patch adds sysfs node to show D-Port diag data.
Link: https://lore.kernel.org/r/20200212214436.25532-4-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch moves freeing of fcport out of interrupt context.
Link: https://lore.kernel.org/r/20200212214436.25532-3-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch provides an interface to do the following (using MBC 0x3B):
- Displays (in hex) the LED config words for all three LEDs.
- Programs the config words for one LED or for all three LEDs.
The sysfs node defined is named beacon_config.
First, to allow driver to gain LED control, do this:
# echo 1 > /sys/class/scsi_host/host#/beacon
Then, to display config words for all three LEDs do this:
# cat /sys/class/scsi_host/host#/beacon_config
To set config words for all three LEDs do this:
# echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config
Or, to set config word for a specific single LED n do this:
# echo n xxxx > /sys/class/scsi_host/host#/beacon_config
where n is the LED number (0, 1, 2)
Finally, to restore LED control back to firmware, do this:
# echo 0 > /sys/class/scsi_host/host#/beacon
Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.com
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
fc_disc_gpn_id_resp() should be the last function using it so free it here
to avoid memory leak.
Link: https://lore.kernel.org/r/1579013000-14570-2-git-send-email-igor.druzhinin@citrix.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare variable-length
types such as these ones is a flexible array member[1][2], introduced in
C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://lore.kernel.org/r/20200213000211.GA23171@embeddedor.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch modifies lpfc to register for Link Integrity events via the use
of an RDF ELS and to perform Link Integrity FPIN logging.
Specifically, the driver was modified to:
- Format and issue the RDF ELS immediately following SCR registration.
This registers the ability of the driver to receive FPIN ELS.
- Adds decoding of the FPIN els into the received descriptors, with
logging of the Link Integrity event information. After decoding, the ELS
is delivered to the scsi fc transport to be delivered to any user-space
applications.
- To aid in logging, simple helpers were added to create enum to name
string lookup functions that utilize the initialization helpers from the
fc_els.h header.
- Note: base header definitions for the ELS's don't populate the
descriptor payloads. As such, lpfc creates it's own version of the
structures, using the base definitions (mostly headers) and additionally
declaring the descriptors that will complete the population of the ELS.
Link: https://lore.kernel.org/r/20200210173155.547-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Restore alignment of the continuations of the ioremap() calls in
zorro_esp_probe(). Join lines where all parameters can fit on a single
line.
Link: https://lore.kernel.org/r/20200212085138.10009-1-geert+renesas@glider.be
Fixes: 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After enter hibern8, as UFS JEDEC ver 3.0 requires, a specific gating wait
time is required before disable the device reference clock. If it is not
specified, use the old delay.
Link: https://lore.kernel.org/r/1581392451-28743-8-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime defines
the minimum time for which the reference clock is required by device during
transition to LS-MODE or HIBERN8 state. Make this change to reflect the new
requirement by adding delays before turning off the clock.
Link: https://lore.kernel.org/r/1581392451-28743-7-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.
Fixes: f2a785ac23 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The functionality of vendor specific ops should be handled properly in
platform specific driver, but should not count on the UFS driver.
Link: https://lore.kernel.org/r/1581392451-28743-5-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The bus bandwidth voting is required to be done before the bus clocks are
enabled, and the unvoting is required to be done only after the bus clocks
are disabled.
Link: https://lore.kernel.org/r/1581392451-28743-4-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This sequence change is required to avoid dips in voltage during boot-up.
Apparently, this dip is caused because in the original sequence, the
regulators are initialized in lpm mode. And then when the load is set to
high, and more current is drawn, than is allowed in lpm, the dip is seen.
Link: https://lore.kernel.org/r/1581392451-28743-3-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Exception event can be raised by the device when system suspend is in
progress. This will result in unclocked register access in exception event
handler as clocks will be turned off during suspend. This change makes sure
to flush exception event handler work in suspend before disabling clocks to
avoid unclocked register access issue.
Link: https://lore.kernel.org/r/1581392451-28743-2-git-send-email-cang@codeaurora.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ADAPT is added specifically for HS Gear4 mode only. Select INITIAL ADAPT
before power mode change to G4 and select NO ADAPT before switch to non-G4
modes.
[mkp: fixed typo in header file]
Link: https://lore.kernel.org/r/1581485910-8307-3-git-send-email-cang@codeaurora.org
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Many vendors would like to disable host TX LCC during initialization
flow. Introduce a common function for all users to make drivers easier to
read and maintained. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20200207070357.17169-3-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek UFS host requires TX LCC to be disabled on both host and device
sides. This can be done by disabling host's local TX LCC before link
startup. Correct TX LCC disabling timing in MediaTek UFS driver.
Link: https://lore.kernel.org/r/20200207070357.17169-2-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a flag to DMA memory allocation to silence a warning.
This driver allocates DMA memory for IO frames. This allocation may exceed
MAX_ORDER pages for few megaraid_sas controllers (controllers with very
high queue depth). Consequently, the driver has logic to keep reducing the
controller queue depth until the DMA memory allocation succeeds.
On impacted megaraid_sas controllers there would be multiple DMA allocation
failures until driver settled on an allocation that fit. These failed DMA
allocation requests caused stack traces in system logs. These were not
harmful and this patch silences those warnings/stack traces.
[mkp: clarified commit desc]
Link: https://lore.kernel.org/r/20200204152413.7107-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2020 for files modified in the 12.6.0.4 patch set.
Link: https://lore.kernel.org/r/20200128002312.16346-13-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current code does some odd +1 over maximum xri count checks and
requires that the lun_queue_count can't be bigger than maximum xri count
divided by 8. These items are bogus.
Clean the code up to cap lun_queue_count to maximum xri count.
Link: https://lore.kernel.org/r/20200128002312.16346-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There was report of an odd "Fix me..." log message, which was tracked down
to the lpfc_els_rcv_rps() routine. This was in handling of a very old and
obsolete ELS - Read Port Status. The RPS ELS was defined in FC-LS-1, but
deprecated in FC-LS-2, and removed from all later FC-LS revisions. It was
replaced by the Read Diagnostic Parameters (RDP) ELS and the Link Error
Status Block descriptor.
There should be no support for the RSP ELS. Remove support from driver.
Link: https://lore.kernel.org/r/20200128002312.16346-9-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Coverity reported a memory corruption error for the fdmi attributes
routines:
CID 15768 [Memory Corruption] Out-of-bounds access on FDMI
Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and
lpfc_fdmi_reg_port_list structures, a field was placed at the start of
payload that may have variable content. The field was given an arbitrary
type (uint32_t). The code then uses the field name to derive an address,
which it used in things such as memset and memcpy. The memset sizes or
memcpy lengths were larger than the arbitrary type, thus coverity reported
an error.
Fix by replacing the arbitrary fields with the real field structures
describing the payload.
Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following error is see from the compiler:
drivers/scsi/lpfc/lpfc_init.c: In function
‘lpfc_cpuhp_get_eq’: drivers/scsi/lpfc/lpfc_init.c:12660:1:
error: the frame size of 1032 bytes is larger than 1024 bytes
[-Werror=frame-larger-than=]
The issue is due to allocating a cpumask on the stack.
Fix by converting to a dynamical allocation of the cpu mask.
Link: https://lore.kernel.org/r/20200128002312.16346-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When performing reset testing, the eq's list for related hwqs was getting
corrupted. In cases where there is not a 1:1 eq to hwq, the eq is
shared. The eq maintains a list of hwqs utilizing it in case of cpu
offlining and polling. During the reset, the hwqs are being torn down so
they can be recreated. The recreation was getting confused by seeing a
non-null eq assignment on the eq and the eq list became corrupt.
Correct by clearing the hdwq eq assignment when the hwq is cleaned up.
Link: https://lore.kernel.org/r/20200128002312.16346-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Adjust FC4 Types in FDMI settings
The driver sets FDMI information registring ELS as a FC4 type. ELS is a
fc3 type and should not be registered.
Fix by removing ELS type bit when we register for FDMI Port attributes.
Link: https://lore.kernel.org/r/20200128002312.16346-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When driver is set to enable bb credit recovery, the switch displayed the
setting as inactive. If the link bounces, it switches to Active.
During link up processing, the driver currently does a MBX_READ_SPARAM
followed by a MBX_CONFIG_LINK. These mbox commands are queued to be
executed, one at a time and the completion is processed by the worker
thread. Since the MBX_READ_SPARAM is done BEFORE the MBX_CONFIG_LINK, the
BB_SC_N bit is never set the the returned values. BB Credit recovery status
only gets set after the driver requests the feature in CONFIG_LINK, which
is done after the link up. Thus the ordering of READ_SPARAM needs to follow
the CONFIG_LINK.
Fix by reordering so that READ_SPARAM is done after CONFIG_LINK. Added a
HBA_DEFER_FLOGI flag so that any FLOGI handling waits until after the
READ_SPARAM is done so that the proper BB credit value is set in the FLOGI
payload.
Fixes: 6bfb162082 ("scsi: lpfc: Fix configuration of BB credit recovery in service parameters")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200128002312.16346-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a call to lpfc_get_cmd_rsp_buf_per_hdwq returns NULL (memory allocation
failure), a previously allocated lpfc_io_buf resource is leaked.
Fix by releasing the lpfc_io_buf resource in the failure path.
Fixes: d79c9e9d4b ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200128002312.16346-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver is occasionally seeing the following SLI Port error, requiring
reset and reinit:
Port Status Event: ... error 1=0x52004a01, error 2=0x218
The failure means an RQ timeout. That is, the adapter had received
asynchronous receive frames, ran out of buffer slots to place the frames,
and the driver did not replenish the buffer slots before a timeout
occurred. The driver should not be so slow in replenishing buffers that a
timeout can occur.
When the driver received all the frames of a sequence, it allocates an IOCB
to put the frames in. In a situation where there was no IOCB available for
the frame of a sequence, the RQ buffer corresponding to the first frame of
the sequence was not returned to the FW. Eventually, with enough traffic
encountering the situation, the timeout occurred.
Fix by releasing the buffer back to firmware whenever there is no IOCB for
the first frame.
[mkp: typo]
Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the locking assumptions this function relies on and also verify
these locking assumptions at runtime.
Cc: Quinn Tran <qutran@marvell.com>
Cc: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20200123042345.23886-2-bvanassche@acm.org
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Not in use anymore. Remove the flag.
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Link: https://lore.kernel.org/r/20200119071432.18558-3-ming.lei@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In current UFS driver design, hba->uic_link_state will not be changed after
link enters Hibern8 state by Auto-Hibern8 mechanism. In this case,
reference clock gating will be skipped unless special handling is
implemented in vendor's callbacks.
Support reference clock gating during Auto-Hibern8 period in MediaTek
Chipsets: If link state is already in Hibern8 while Auto-Hibern8 feature is
enabled, gate reference clock in setup_clocks callback.
Link: https://lore.kernel.org/r/20200129105251.12466-5-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if
Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is
supported by host but not actually enabled, Auto-Hibern8 error shall not
happen.
To fix this, provide a way to detect if Auto-Hibern8 is actually enabled
first, and bypass Auto-Hibern8 disabling case in
ufshcd_is_auto_hibern8_error().
Fixes: 8217444039 ("scsi: ufs: Add error-handling of Auto-Hibernate")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If system suspend or runtime suspend mode is configured as linkoff state,
phy can be powered off and reference clock can be gated in MediaTek
Chipsets.
At the same time, remove redundant reference clock control in suspend and
resume callbacks because such control can be well-handled in setup_clocks
callback.
Link: https://lore.kernel.org/r/20200129105251.12466-3-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek Chipsets can enter proprietary UniPro low-power mode during
suspend while link is in hibern8 state. Make sure leaving low-power mode
before every link startup to prevent lockup in any possible error recovery
path.
At the same time, re-factor related funcitons to improve code readability.
Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two statements that are indented one level too deeply, remove
the extraneous tabs.
[mkp: fix typo spotted by Bart]
Link: https://lore.kernel.org/r/20200126154757.42530-1-colin.king@canonical.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Connection failure processing depends on a daemon being present to (at
least) stop the connection and start recovery. This is a problem on a
multipath scenario, where if the daemon failed for whatever reason, the
SCSI path is never marked as down, multipath won't perform the failover and
IO to the device will be forever waiting for that connection to come back.
This patch performs the connection failure entirely inside the kernel.
This way, the failover can happen and pending IO can continue even if the
daemon is dead. Once the daemon comes alive again, it can execute recovery
procedures if applicable.
Cc: Mike Christie <mchristi@redhat.com>
Cc: Lee Duncan <LDuncan@suse.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20200125061925.191601-1-krisman@collabora.com
Co-developed-by: Dave Clausen <dclausen@google.com>
Co-developed-by: Nick Black <nlb@google.com>
Co-developed-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Co-developed-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Tahsin Erdogan <tahsin@google.com>
Co-developed-by: Frank Mayhar <fmayhar@google.com>
Co-developed-by: Junho Ryu <jayr@google.com>
Co-developed-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Reviewed-by: Khazhismel Kumykov <khazhy@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Bharath Ravi <rbharath@google.com>
Signed-off-by: Dave Clausen <dclausen@google.com>
Signed-off-by: Nick Black <nlb@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Anatol Pomazau <anatol@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reduce code duplication by introducing the tcm_qla2xxx_{get,rel}_cmd()
functions. Introduce these functions in the tcm_qla2xxx.c source files such
that the qla_target.c source file becomes independent of the SCSI target
core header files. This patch fixes a bug, namely by ensuring that
qlt_alloc_qfull_cmd() sets cmd->se_cmd.map_tag.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Link: https://lore.kernel.org/r/20200103192719.205158-1-bvanassche@acm.org
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Five small patches, all in drivers or doc, which missed the initial
pull request. The qla2xxx and megaraid_sas are actual fixes and the
rest are spelling and doc changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXj8MoCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUjlAQChB8+I
pBKVOfU+38vndu+YW6IRb11HhxKzY9LlHVf04wD+LxKsxuYKpZjivytfuYJGsxMD
C5EWLUxB7GYUQItEBjQ=
=7xJj
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull misc SCSI fixes from James Bottomley:
"Five small patches, all in drivers or doc, which missed the initial
pull request.
The qla2xxx and megaraid_sas are actual fixes and the rest are
spelling and doc changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: fix spelling mistake "initilized" -> "initialized"
scsi: pm80xx: fix spelling mistake "to" -> "too"
scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com
scsi: megaraid_sas: fixup MSIx interrupt setup during resume
scsi: qla2xxx: Fix unbound NVME response length
There is a spelling mistake in a pr_err message. Fix it.
Link: https://lore.kernel.org/r/20200122091250.2777221-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is a spelling mistake in a pm8001_printk message. Fix it.
Link: https://lore.kernel.org/r/20200123005706.2834281-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Streamline resume workflow by using the same functions for enabling MSIx
interrupts as used during initialisation. Without it the driver might
crash during resume with:
WARNING: CPU: 2 PID: 4306 at ../drivers/pci/msi.c:1303 pci_irq_get_affinity+0x3b/0x90
Link: https://lore.kernel.org/r/20200113132609.69536-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On certain cases when response length is less than 32, NVME response data
is supplied inline in IOCB. This is indicated by some combination of state
flags. There was an instance when a high, and incorrect, response length
was indicated causing driver to overrun buffers. Fix this by checking and
limiting the response payload length.
Fixes: 7401bc18d1 ("scsi: qla2xxx: Add FC-NVMe command handling")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200124045014.23554-1-hmadhani@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There
are a couple of core and base updates around error propagation and
atomicity in the attribute container base we use for the SCSI
transport classes. The rest is minor changes and updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXjHQJyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZZ8AQC02N+v
iUnTl1YxGPjIWBbnHuUxN2Qbb9D3C6gAT1LkigEArlk163K3A1XEQHF/VNCdAz/f
01XYTd3p1VHuegIBHlk=
=Cn52
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series is slightly unusual because it includes Arnd's compat
ioctl tree here:
1c46a2cf2d Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Excluding Arnd's changes, this is mostly an update of the usual
drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas.
There are a couple of core and base updates around error propagation
and atomicity in the attribute container base we use for the SCSI
transport classes.
The rest is minor changes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits)
scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask
scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity
scsi: hisi_sas: Modify the file permissions of trigger_dump to write only
scsi: hisi_sas: Replace magic number when handle channel interrupt
scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock
scsi: hisi_sas: use threaded irq to process CQ interrupts
scsi: ufs: Use UFS device indicated maximum LU number
scsi: ufs: Add max_lu_supported in struct ufs_dev_info
scsi: ufs: Delete is_init_prefetch from struct ufs_hba
scsi: ufs: Inline two functions into their callers
scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
scsi: ufs: Split ufshcd_probe_hba() based on its called flow
scsi: ufs: Delete struct ufs_dev_desc
scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails
scsi: ufs-mediatek: enable low-power mode for hibern8 state
scsi: ufs: export some functions for vendor usage
scsi: ufs-mediatek: add dbg_register_dump implementation
scsi: qla2xxx: Fix a NULL pointer dereference in an error path
scsi: qla1280: Make checking for 64bit support consistent
scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1
...
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
-----BEGIN PGP SIGNATURE-----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=yJZi
-----END PGP SIGNATURE-----
Merge tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"This may be the most quiet round we've had in years. I'm not
complaining. Really not a lot to detail here, outside of spelling and
documentation improvements/fixes, we have:
- Allow t10-pi to be modular (Herbert)
- Remove dead code in bfq (Alex)
- Mark zone management requests with REQ_SYNC (Chaitanya)
- BFQ division improvement (Wen)
- Small series improving plugging (Pavel)"
* tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block:
partitions/ldm: fix spelling mistake "to" -> "too"
block, bfq: improve arithmetic division in bfq_delta()
block/bfq: remove unused bfq_class_rt which never used
block: mark zone-mgmt bios with REQ_SYNC
blk-mq: Document functions for sending request
block: Allow t10-pi to be modular
blk-mq: optimise blk_mq_flush_plug_list()
list: introduce list_for_each_continue()
blk-mq: optimise rq sort function
-----BEGIN PGP SIGNATURE-----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=TxAC
-----END PGP SIGNATURE-----
Merge tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Unfortunately this weekend we had a few last minute reports, one was
for block.
The partition disable for zoned devices was overly restrictive, it can
work (and be supported) just fine for host-aware variants.
Here's a fix ensuring that's the case so we don't break existing users
of that"
* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
block: allow partitions on host aware zone devices
Two last minute fixes, both in drivers. The fnic one is a highly
unlikely condition, but the RDMA one is a recently introduced
regression that causes a kernel warning to trigger in every RDMA
logon, which would be unsightly if it got into the final release.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJsEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXi3VRyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbrpAP9I/pEp
TWu/QkqFFrmuYbzuxtRML7X2T7+B96J/CRtQvQD3TAIW0gvw49Uj25yEwTRnVzCs
1A+eELAahzBPW+rRBw==
=C3yx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two last minute fixes, both in drivers.
The fnic one is a highly unlikely condition, but the RDMA one is a
recently introduced regression that causes a kernel warning to trigger
in every RDMA logon, which would be unsightly if it got into the final
release"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: RDMA/isert: Fix a recently introduced regression related to logout
scsi: fnic: do not queue commands during fwreset
Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks. In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices. Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.
Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.
Fixes: 5eac3eb30c ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a link is going down the driver will be calling fnic_cleanup_io(),
which will traverse all commands and calling 'done' for each found command.
While the traversal is handled under the host_lock, calling 'done' happens
after the host_lock is being dropped.
As fnic_queuecommand_lck() is being called with the host_lock held, it
might well be that it will pick the command being selected for abortion
from the above routine and enqueue it for sending, but then 'done' is being
called on that very command from the above routine.
Which of course confuses the hell out of the scsi midlayer.
So fix this by not queueing commands when fnic_cleanup_io is active.
Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The trigger_dump file is only used to manually trigger the dump, and did
not provide a read callback function for it, so its file permission
setting to 600 is wrong,and should be changed to 200.
Link: https://lore.kernel.org/r/1579522957-4393-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use magic number as offset and mask when handle channel interrupt, so
use macro to replace it.
Link: https://lore.kernel.org/r/1579522957-4393-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After changing tasklet to workqueue or threaded irq, some critical
resources are only used on threads (not in interrupt or bottom half of
interrupt), so replace spin_lock_irqsave/spin_unlock_restore with
spin_lock/spin_unlock to protect those critical resources.
Link: https://lore.kernel.org/r/1579522957-4393-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it
only allows a single target CPU in the affinity mask to process interrupts
and also interrupt thread, and the performance of using threaded irq is
almost the same as tasklet. But if the config is not enabled, the interrupt
thread will be allowed all the CPUs in the affinity mask. At that situation
it improves the performance (about 20%).
Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different
architecture chip, and it seems to be better to make it be configured
easily.
Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of
logical units supported by the UFS device is indicated by parameter
bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard
code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device
indicated number instead.
Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add one new parameter max_lu_supported in struct ufs_dev_info, which will
be used to express exactly how many general LUs being supported by UFS
device, and initialize it during booting stage. This patch also adds a new
function ufshcd_device_geo_params_init() for initialization of UFS device
geometry descriptor related parameters.
Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Without variable is_init_prefetch, the current logic can guarantee
ufshcd_init_icc_levels() will execute only once, delete it now.
Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly
inline ufshcd_read_desc() into its callers.
Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_get_max_pwr_mode() only need to be called once while booting, take
it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init().
Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch has two major non-functionality changes:
1. Take scanning host if-statement out from ufshcd_probe_hba(), and move
into a new added function ufshcd_add_lus(). In this new function
ufshcd_add_lus(), the main functionalitis include: ICC initialization, add
well-known LUs, devfreq initialization, UFS bsg probe and scsi host
scan. The reason for this change is that these functionalities only being
called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the
processes of error handling and power management ufshcd_suspend(),
ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis
above metioned are not hit.
2. Move context of initialization of parameters associated with the UFS
device to a new added function ufshcd_device_params_init(). The reason of
this change is that all of these parameters are used by driver, but only
need to be initialized once when booting. Combine them into an integral
function, make them easier maintain.
Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In consideration of UFS host driver uses parameters of struct ufs_dev_desc,
move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc.
Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in
case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this
value, and doesn't report this failure to upper caller. This patch is to
fix this issue.
Fixes: 2a8fa60044 ("ufs: manually add well known logical units")
Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In MediaTek Chipsets, UniPro link and ufshci can enter proprietary
low-power mode while link is in hibern8 state.
Link: https://lore.kernel.org/r/20200117035108.19699-4-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export below functions for vendor usage:
int ufshcd_hba_enable(struct ufs_hba *hba);
int ufshcd_make_hba_operational(struct ufs_hba *hba);
int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
Link: https://lore.kernel.org/r/20200117035108.19699-3-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add dbg_register_dump variant vendor implementation in MediaTek UFS driver.
Link: https://lore.kernel.org/r/20200117035108.19699-2-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use #ifdef QLA_64BIT_PTR to check if 64bit support is enabled. This
fixes ("scsi: qla1280: Fix dma firmware download, if dma address is
64bit").
Link: https://lore.kernel.org/r/20200117115628.13219-1-tbogendoerfer@suse.de
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Three fixes in drivers with no impact to core code. The mptfusion fix
is enormous because the driver API had to be rethreaded to pass down
the necessary iocp pointer, but once that's done a significant chunk
of code is deleted. The other two patches are small.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXiNL7iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishd6OAP0dPFlB
Nd8g0PR7OV4L6DpTcR2v6gaYZRoLeq0+p3b7yQD9EL5LiESIciLV2nk8pMoQVEqg
i7Pz5L2RJnLDRoUgIgU=
=YvR2
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes in drivers with no impact to core code.
The mptfusion fix is enormous because the driver API had to be
rethreaded to pass down the necessary iocp pointer, but once that's
done a significant chunk of code is deleted.
The other two patches are small"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mptfusion: Fix double fetch bug in ioctl
scsi: storvsc: Correctly set number of hardware queues for IDE disk
scsi: fnic: fix invalid stack access
IOCTLs causing firmware fault may end up in failed controller resets and
finally killing the adapter.
This patch fixes this problem as stated below:
In OCR sequence, driver will attempt refiring pended IOCTLs upto two times.
If first two attempts fail, then in third attempt driver will return pended
IOCTLs with EBUSY status to application. These changes are done to ensure
if any of pended IOCTLs is causing firmware fault and resulting into OCR
failure, then in last attempt of OCR driver will refrain firing it to
firmware and saving adapter from being killed due to faulty IOCTL.
Link: https://lore.kernel.org/r/1579000882-20246-10-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver initiates OCR if a DCMD command times out. But there is a deadlock
if the driver attempts to invoke another OCR before the mutex lock
(reset_mutex) is released from the previous session of OCR.
This patch takes care of the above scenario using new flag
MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
DCMD_INIT is introduced to indicate the initial DCMD status, which was
earlier set to MFI status. DCMD_BUSY indicates the resource is busy or
locked.
Link: https://lore.kernel.org/r/1579000882-20246-8-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After issuing a adapter reset, driver blindly used to set adprecovery flag
to OPERATIONAL state. Add a check to see if the FW is operational before
setting the flag and marking reset adapter successful.
Link: https://lore.kernel.org/r/1579000882-20246-7-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
At the time of firmware initialization, if JBOD map or RAID map is not
available, driver can function without these features in a limited
functionality mode.
Link: https://lore.kernel.org/r/1579000882-20246-6-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ideally, optimal queue depth will be provided by firmware. The driver
defines will be used as a fallback mechanism in case the FW assisted QD is
not supported. The driver defined values provide optimal queue depth for
most of the drives and the workloads, as is learned from the firmware
assisted QD results.
Link: https://lore.kernel.org/r/1579000882-20246-4-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Disable WRITE_SAME (no_write_same) for Virtual Disks only. For System PDs
and EPDs (Enhanced PDs), WRITE_SAME need not be disabled by default.
Link: https://lore.kernel.org/r/1579000882-20246-3-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After device resume we expect the firmware to be in READY state.
Transition to READY might fail due to unhandled exceptions, such as an
internal error or a hardware failure. Retry initiating chip reset and wait
for the controller to come to ready state.
Link: https://lore.kernel.org/r/1579000882-20246-2-git-send-email-anand.lodnoor@broadcom.com
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Anand Lodnoor <anand.lodnoor@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do firmware download with 64bit LOAD_RAM command, if driver is using
64bit addressing.
Link: https://lore.kernel.org/r/20200114160936.1517-1-tbogendoerfer@suse.de
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware
queue and CPU queue") introduced a regression for disks attached to
IDE. For these disks the host VSP only offers one VMBUS channel. Setting
multiple queues can overload the VMBUS channel and result in performance
drop for high queue depth workload on system with large number of CPUs.
Fix it by leaving the number of hardware queues to 1 (default value) for
IDE disks.
Fixes: 0ed8810276 ("scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue")
Link: https://lore.kernel.org/r/1578960516-108228-1-git-send-email-longli@linuxonhyperv.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc -O3 warns that some local variables are not properly initialized:
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[0] = *a0;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
u64 a0, a1;
^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
vdev->args[1] = *a1;
~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
u64 a0, a1;
^~
Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.
Use an array of two u64 variables where needed to make it work correctly.
I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.
Fixes: 5df6d737dd ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the transport cannot be registered, the session/connection creation
needs to be failed early to let the initiator know. Otherwise, the system
will have an outstanding connection that cannot be used nor removed by
open-iscsi. The result is similar to the error below, triggered by
injecting a failure in the transport's registration path.
openiscsi reports success:
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -l
Logging in to [iface: default, target: iqn:lun1, portal: 127.0.0.1,3260]
Login to [iface: default, target: iqn:lun1, portal:127.0.0.1,3260] successful.
But cannot remove the session afterwards, since the kernel is in an
inconsistent state.
root@debian-vm:~# iscsiadm -m node -T iqn:lun1 -p 127.0.0.1 -u
iscsiadm: No matching sessions found
Link: https://lore.kernel.org/r/20200106185817.640331-4-krisman@collabora.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pass UFS device information to vendor-specific variant callback
"apply_dev_quirks" because some platform vendors need to know such
information to apply special handling or quirks in specific devices.
At the same time, modify existing vendor implementations according to the
new interface for those vendor drivers which will be built-in or built as a
module alone with UFS core driver.
[mkp: clarified commit desc]
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578726707-6596-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the incorrect %X print format specifier is being used for several
unsigned longs. Fix these by using %lX instead. Also join up some literal
strings that are split.
Link: https://lore.kernel.org/r/20200108193800.96706-1-colin.king@canonical.com
Addresses-Coverity: ("Invalid type in argument to printf format specifier")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove "errors" word in output string by ufshcd_print_err_hist() since not
all printed targets are "errors". Sometimes they are just "events".
In addition, all events which can be treated as "errors" already have "err"
or "fail" words in their names.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-4-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Device reset history shall be also added for vendor's device reset variant
operation implementation.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently checking if an error history element is empty or not is by its
"value". In most cases, value is error code.
However this checking is not correct because some errors or events do not
specify any values in error history so values remain as 0, and this will
lead to incorrect empty checking.
Fix it by checking "timestamp" instead of "value" because timestamp will be
always assigned for all history elements
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1578147968-30938-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Two simple fixes in the upper drivers (so both fairly core), one in
enclosures, which fixes replugging a device into an enclosure slot and
one in the disk driver which fixes revalidating a drive with
protection information (PI) to make it a non-PI drive ... previously
we were still remembering the old PI state. Both fixed issues are
quite rare in the field.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXh3ociYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishUvhAQDcb5gL
fuNT0jNkQ54sKUjVKvvJP1ArmfJ1ZIub4bvkMwEA0D+Ho3iE28KOSW1NRtgTe5mz
4Rrq64iJcAnt1PQ776U=
=+ANJ
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two simple fixes in the upper drivers (so both fairly core), one in
enclosures, which fixes replugging a device into an enclosure slot and
one in the disk driver which fixes revalidating a drive with
protection information (PI) to make it a non-PI drive ... previously
we were still remembering the old PI state.
Both fixed issues are quite rare in the field"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: enclosure: Fix stale device oops with hot replug
scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.
Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).
[mkp: commit desc]
Fixes: fe542396da ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/1578532344-101668-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix sparse warning:
drivers/scsi/lpfc/lpfc_nportdisc.c:344:1: warning:
symbol 'lpfc_defer_acc_rsp' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20200107014956.41748-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series concludes the work I did for linux-5.5 on the compat_ioctl()
cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving
everything into drivers.
Overall this would be a reduction both in complexity and line count, but
as I'm also adding documentation the overall number of lines increases
in the end.
My plan was originally to keep the SCSI and block parts separate.
This did not work easily because of interdependencies: I cannot
do the final SCSI cleanup in a good way without first addressing the
CDROM ioctls, so this is one series that I hope could be merged through
either the block or the scsi git trees, or possibly both if you can
pull in the same branch.
The series comes in these steps:
1. clean up the sg v3 interface as suggested by Linus. I have
talked about this with Doug Gilbert as well, and he would
rebase his sg v4 patches on top of "compat: scsi: sg: fix v3
compat read/write interface"
2. Actually moving handlers out of block/compat_ioctl.c and
block/scsi_ioctl.c into drivers, mixed in with cleanup
patches
3. Document how to do this right. I keep getting asked about this,
and it helps to point to some documentation file.
The branch is based on another one that fixes a couple of bugs found
during the creation of this series.
Changes since v3:
https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/
- Move sr_compat_ioctl fixup to correct patch (Ben Hutchings)
- Add Reviewed-by tags
Changes since v2:
https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/
- Rebase to v5.5-rc4, which contains the earlier bugfixes
- Fix sr_block_compat_ioctl() error handling bug found by
Ben Hutchings
- Fix idecd_locked_compat_ioctl() compat_ptr() bug
- Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide
- More documentation improvements
Changes since v1:
https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/
- move out the bugfixes into a branch for itself
- clean up scsi sg driver further as suggested by Christoph Hellwig
- avoid some ifdefs by moving compat_ptr() out of asm/compat.h
- split out the blkdev_compat_ptr_ioctl function; bug spotted by
Ben Hutchings
- Improve formatting of documentation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=cddL
-----END PGP SIGNATURE-----
Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue
Pull compat_ioctl cleanup from Arnd. Here's his description:
This series concludes the work I did for linux-5.5 on the compat_ioctl()
cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving
everything into drivers.
Overall this would be a reduction both in complexity and line count, but
as I'm also adding documentation the overall number of lines increases
in the end.
My plan was originally to keep the SCSI and block parts separate.
This did not work easily because of interdependencies: I cannot
do the final SCSI cleanup in a good way without first addressing the
CDROM ioctls, so this is one series that I hope could be merged through
either the block or the scsi git trees, or possibly both if you can
pull in the same branch.
The series comes in these steps:
1. clean up the sg v3 interface as suggested by Linus. I have
talked about this with Doug Gilbert as well, and he would
rebase his sg v4 patches on top of "compat: scsi: sg: fix v3
compat read/write interface"
2. Actually moving handlers out of block/compat_ioctl.c and
block/scsi_ioctl.c into drivers, mixed in with cleanup
patches
3. Document how to do this right. I keep getting asked about this,
and it helps to point to some documentation file.
The branch is based on another one that fixes a couple of bugs found
during the creation of this series.
Changes since v3:
https://lore.kernel.org/lkml/20200102145552.1853992-1-arnd@arndb.de/
- Move sr_compat_ioctl fixup to correct patch (Ben Hutchings)
- Add Reviewed-by tags
Changes since v2:
https://lore.kernel.org/lkml/20191217221708.3730997-1-arnd@arndb.de/
- Rebase to v5.5-rc4, which contains the earlier bugfixes
- Fix sr_block_compat_ioctl() error handling bug found by
Ben Hutchings
- Fix idecd_locked_compat_ioctl() compat_ptr() bug
- Don't try to handle HDIO_DRIVE_TASKFILE in drivers/ide
- More documentation improvements
Changes since v1:
https://lore.kernel.org/lkml/20191211204306.1207817-1-arnd@arndb.de/
- move out the bugfixes into a branch for itself
- clean up scsi sg driver further as suggested by Christoph Hellwig
- avoid some ifdefs by moving compat_ptr() out of asm/compat.h
- split out the blkdev_compat_ptr_ioctl function; bug spotted by
Ben Hutchings
- Improve formatting of documentation
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently t10-pi can only be built into the block layer which via
crc-t10dif pulls in a whole chunk of the Crypto API. In fact all
users of t10-pi work as modules and there is no reason for it to
always be built-in.
This patch adds a new hidden option for t10-pi that is selected
automatically based on BLK_DEV_INTEGRITY and whether the users
of t10-pi are built-in or not.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands
for SCSI devices, it is used by all libata drivers as well as a few
drivers that support SAS attached SATA drives.
The only command that is not safe for compat ioctls here is
HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall()
in order to do both cases correctly, and change all callers to use it
as both native and compat callback pointers, including the indirect
callers through sas_ioctl and ata_scsi_ioctl.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is no need for the special cases for the cdrom ioctls any more now,
so make sure that each cdrom driver has a .compat_ioctl() callback and
calls cdrom_compat_ioctl() directly there.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Each driver calling scsi_ioctl() gets an equivalent compat_ioctl()
handler that implements the same commands by calling scsi_compat_ioctl().
The scsi_cmd_ioctl() and scsi_cmd_blk_ioctl() functions are compatible
at this point, so any driver that calls those can do so for both native
and compat mode, with the argument passed through compat_ptr().
With this, we can remove the entries from fs/compat_ioctl.c. The new
code is larger, but should be easier to maintain and keep updated with
newly added commands.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to move the compat handling for SCSI ioctl commands out of
fs/compat_ioctl.c into the individual drivers, we need a helper function
first to match the native ioctl handler called by sd, sr, st, etc.
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the v5.4 merge window, a cleanup patch from Al Viro conflicted
with my rework of the compat handling for sg.c read(). Linus Torvalds
did a correct merge but pointed out that the resulting code is still
unsatisfactory.
I later noticed that the sg_new_read() function still gets the compat
mode wrong, when the 'count' argument is large enough to pass a
compat_sg_io_hdr object, but not a nativ sg_io_hdr.
To address both of these, move the definition of compat_sg_io_hdr
into a scsi/sg.h to make it visible to sg.c and rewrite the logic
for reading req_pack_id as well as the size check to a simpler
version that gets the expected results.
Fixes: c35a5cfb41 ("scsi: sg: sg_read(): simplify reading ->pack_id of userland sg_io_hdr_t")
Fixes: 98aaaec4a1 ("compat_ioctl: reimplement SG_IO handling")
Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove usage of device_busy counter from driver. Instead of device_busy
counter now driver uses 'nr_active' counter of request_queue to get the
number of inflight request for a LUN.
Link: https://lore.kernel.org/r/20191226111333.26131-10-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print the function name in which MPT command got timed out. This will
facilitate debugging in which path corresponding MPT command got timeout in
first failure instance of log itself.
Link: https://lore.kernel.org/r/20191226111333.26131-9-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This improves mpt3sas driver default debug information collection and
allows for a higher percentage of issues being able to be resolved with a
first-time data capture. However, this improvement to balance the amount
of debug data captured with the performance of driver.
Enabled below print messages with out affecting the IO performance,
1. When task abort TM is received then print IO commands's timeout value
and how much time this command has been outstanding.
2. Whenever hard reset occurs then print from where this hard reset has
been issued.
3. Failure message should be displayed for failure scenarios without any
logging level.
4. Added a print after driver successfully register or unregistered a
target drive with the SML. This print will be useful for debugging the
issue where the drive addition or deletion is hanging at SML.
5. During driver load time print request, reply, sense and config page
pool's information such as its address, length and size. Also printed
sg_tablesize information.
Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When Firmware fault occurs then print in which path firmware fault has
occurred. This will be useful while debugging the firmware fault issues.
Link: https://lore.kernel.org/r/20191226111333.26131-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Watchdog thread polls for IOC state every 1 second. If it detects that IOC
state is in CoreDump state then it immediately stops the IOs and also
clears the outstanding commands issued to the HBA firmware and then it will
poll for IOC state to be out of CoreDump state and once it detects that IOC
state is changed from CoreDump state to Fault state (or) CoreDumpTOSec
number of seconds are elapsed then it will issue host reset operation and
moves the IOC state to Operational state and resumes the IOs.
Whenever any TM is received from SML then if driver detects the IOC state
is in CoreDump state then it will wait for CoreDump state to be cleared and
will host reset operation.
Link: https://lore.kernel.org/r/20191226111333.26131-6-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
New feature is added in HBA firmware where it copies the collected firmware
logs in flash region named 'CoreDump' whenever HBA firmware faults occur.
For copying the logs to CoreDump flash region firmware needs some time and
hence it has introduced a new IOC state named "CoreDump" State.
Whenever driver detects the CoreDump state then it means that some firmware
fault has occurred and firmware is copying the logs to the coredump flash
region. During this time driver should not perform any operation with the
HBA, driver should wait for HBA firmware to move the IOC state from
'CoreDump' state to 'Fault' state once it's done with copying the logs to
coredump region. Once driver detects the Fault state then it will issue the
diag reset/host reset operation to move the IOC state from Fault to
Operational state.
Here the valid IOC state transactions w.r.t to this CoreDump state feature,
Operational -> Fault:
The IOC transitions to the Fault state when an operational error occurs AND
CoreDump is not supported (or disabled) by the firmware(FW).
Operational -> CoreDump:
The IOC transitions to the CoreDump state when an operational error occurs
AND CoreDump is supported & enabled by the FW.
CoreDump -> Fault:
A transition from CoreDump state to Fault state happens when the FW
completes the CoreDump collection.
CoreDump -> Reset:
A transition out of the CoreDump state happens when the host sets the Reset
Adapter bit in the System Diagnostic Register (Hard Reset). This reset
action indicates that CoreDump took longer than the host time out.
Firmware informs the driver about the maximum time that driver has to wait
for firmware to transition the IOC state from 'CoreDump' to 'FAULT' state
through 'CoreDumpTOSec' field of ManufacturingPage11 page. if this
'CoreDumpTOSec' field value is zero then driver will wait for max 15
seconds.
Driver informs the HBA firmware that it supports this new IOC state named
'CoreDump' state by enabling COREDUMP_ENABLE flag in ConfigurationFlags
field of ioc init request message.
Current patch handles the CoreDump state only during HBA initialization and
release scenarios where watchdog thread (which polls the IOC state in every
one second) is disabled. Next subsequent patch handle the CoreDump state
when watchdog thread is enabled.
During HBA initialization or release execution time if driver detects the
CoreDump state then driver will wait for maximum CoreDumpTOSec value
seconds for FW to copy the logs. After that it will issue the diag reset
operation to move the IOC state to Operational state.
Link: https://lore.kernel.org/r/20191226111333.26131-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Renamed _base_after_reset_handler function to
_base_clear_outstanding_commands so that it can be used in multiple
scenarios with suitable name which matches with the operation it does.
Also renamed its child functions. No functional changes.
Link: https://lore.kernel.org/r/20191226111333.26131-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce function _scsih_nvme_shutdown() to issue IO Unit Control message
to IOC firmware with operation code 'shutdown'. This causes IOC firmware to
issue NVMe shutdown commands to all NVMe drives attached to it.
NVMe Shutdown:
NVMe devices need to have a specific shutdown sequence performed before
power is removed. For this, the IOC firmware needs to be notified when the
system is being shutdown. So during the system shutdown time, driver issues
an IO Unit Control request with operation code MPI26_CTRL_OP_SHUTDOWN to
inform firmware that a shutdown is initiated.
This shutdown command is issued only if NVMe devices are attached to the
controller.
During each NVMe device addition, driver reads pcie device page2 to get
shutdown latency (e.g. drive's RTD3 Entry Latency) and updates the max
latency value among the added NVMe drives in ioc->max_shutdown_latency.
This is used as the timeout value for IO Unit Control command at the time
of shutdown.
When a NVMe drive is removed and its shutdown latency matches which
ioc->max_shutdown_latency then ioc->max_shutdown_latency is updated to next
max value (by iterating over the list of available devices). If the
shutdown latency is 0, then default timeout is set to six seconds.
Link: https://lore.kernel.org/r/20191226111333.26131-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enable clk-gating with customized delayed timer value in MediaTek Chipsets.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-7-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export ufshcd_auto_hibern8_update to allow vendors to use common interface
to customize auto-hibernate timer.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-5-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce reference clock control in MediaTek Chipset in order to disable
it if it is not necessary by UFS device to save system power.
Currently reference clock can be disabled during system suspend, runtime
suspend and clock-gating after link enters hibernate state.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1577683950-1702-4-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch corrects the SPDX License Identifier style in header files
related to Mylex DAC960/DAC1100 PCI RAID Controllers. It assigns explicit
block comment to the SPDX License Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Link: https://lore.kernel.org/r/88332ad390f985bdebb9f2adaf2d499b0a639753.1577511720.git.nishadkamdar@gmail.com
Suggested-by: Joe Perches <joe@perches.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS SCSI timeout handler was needed to compensate that
ufshcd_queuecommand() could return SCSI_MLQUEUE_HOST_BUSY for a long
time. Commit a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating
tag conflicts") fixed this so the timeout handler is no longer necessary.
See also commit f550c65b54 ("scsi: ufs: implement scsi host timeout handler").
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-7-bvanassche@acm.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Starting execution of a command before tracing a command may cause the
completion handler to free data while it is being traced. Fix this race by
tracing a command before it is submitted.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-5-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-4-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the lrbp->cmd expression occurs multiple times, introduce a new local
variable to hold that pointer. This patch does not change any
functionality.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-3-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove a space that occurs after a tab.
Cc: Bean Huo <beanhuo@micron.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20191224220248.30138-2-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We already have ufshcd_vops_dbg_register_dump() thus all
"hba->vops->dbg_register_dump" references can be replaced by it.
Link: https://lore.kernel.org/r/1577192466-20762-3-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently UFS driver has ufshcd_scsi_block_requests() with reference
counter mechanism to avoid possible racing of blocking and unblocking
requests flow. Unify all users in UFS driver to use the same function.
Link: https://lore.kernel.org/r/1577192466-20762-2-git-send-email-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the block layer implement zone checks on revalidate,
sd_zbc_check_zones() is reduced getting the zone size and verifying the
device capacity for device with RC_BASIS=0. Be clear about this by renaming
sd_zbc_check_zones() to sd_zbc_check_capacity() and updating the function
description and comments.
Link: https://lore.kernel.org/r/20191220075823.400072-3-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the block layer generic zone revalidation code in
blk_revalidate_disk_zones() checks for power of 2 zone size, there is no
need to do it in sd_zbc_check_zones(). Remove this check.
Link: https://lore.kernel.org/r/20191220075823.400072-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch improves readability and does not change any functionality.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219005050.40193-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since qla82xx_get_fw_size() returns a number in CPU-endian format, change
its return type from __le32 into u32. This patch does not change any
functionality.
Fixes: 9c2b297572 ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.")
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Declare qla_hw_data.flt as a qla_flt_header pointer instead of as a void
pointer. Add a zero-length array at the end of struct qla_flt_header to
make it clear that qla_flt_header and qla_flt_region are contiguous. This
patch removes several casts but does not change any functionality.
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219004706.39039-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Four fixes and one spelling update, all in drivers: 2 in lpfc and the
rest in mp3sas, cxgbi and target.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXgaIWSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb2SAP45hS5T
owI8lIt+jMBnYG3k/66EleVdqMOcvtm9ewDN2gD/eW1LBz6uPzPn07gLB3V4TTTZ
rI8lfohhWJwRAHjvL8A=
=nxXW
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes and one spelling update, all in drivers: two in lpfc and
the rest in mp3sas, cxgbi and target"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: Fix protection error with blocks greater than 512B
scsi: libcxgbi: fix NULL pointer dereference in cxgbi_device_destroy()
scsi: lpfc: fix spelling mistakes of asynchronous
scsi: lpfc: fix build failure with DEBUGFS disabled
scsi: mpt3sas: Fix double free in attach error handling
Currently we use a mixture of %016llx, %llx, and %16llx when printing a SAS
address.
Since the most significant nibble of the SAS address is always 5 - as per
standard - this formatting is not so important; but some fake SAS addresses
for SATA devices may not be. And we have mangled/invalid address to
consider also. And it's better to be consistent in the code, so use a fixed
format.
The SAS address is a fixed size at 64b, so we want to 0 byte extend to 16
nibbles, so use %016llx globally.
Also make some prints to be explicitly hex, and tidy some whitespace issue.
Link: https://lore.kernel.org/r/1576758957-227350-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current driver code looks at iocb types and uses a "==" comparison on the
flags to determine type. If another flag were set, it would disrupt the
comparison.
Fix by converting to a bitwise & operation.
Link: https://lore.kernel.org/r/20191218235808.31922-10-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When running Cisco-MDS diagnostics which perform driver-level frame loop
back, the switch is reporting errors. Diagnostic has a limit on latency
that is not being met by the driver.
The requirement of Latency frames is that they should be responded back by
the host with a maximum delay of few hundreds of microseconds. If the
switch doesn't get response frames within this time frame, it fails the
test.
Test is failing as the lpfc-wq workqueue was overwhelmed by the packet rate
and in some cases, the work element yielded to other kernel elements.
To resolve, reduce the outstanding load allowed by the adapter. This
ensures the driver spends a reasonable amount of time doing loopback and
can do so such that latency values can be met. Load is managed by reducing
the number of receive buffers posted such that the link can be
backpressured to reduce load.
Link: https://lore.kernel.org/r/20191218235808.31922-9-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When unattaching, the driver did not unmap the DPP bar. This caused the
next load of the driver, which attempts to enable wc, to not work correctly
and wc to be disabled due to an address mapping overlap.
Fix by unmapping on unattach.
Link: https://lore.kernel.org/r/20191218235808.31922-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The order of the flags/checks for adapters where FC-AL is supported
erroneously excluded lpe35000 adapter models. Also noted that the G7 flags
for Loop and Persistent topology are incorrect. They should follow the
rules as G6.
Rework the logic to enable LPe35000 FC-AL support. Collapse G7 support
logic to the same rules as G6.
Link: https://lore.kernel.org/r/20191218235808.31922-7-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
/sys/kernel/debug/lpfc/fn0/ras_log always shows the same ras_log even if
there are link bounce events triggered via issue_lip
Dynamic FW logging had logic that prematurely breaks from the buffer
filling loop.
Fix the check for buffer overrun by looking before copying and restricting
copy length to the remaining buffer. When copying, ensure space for NULL
character is left in the buffer. While in the routine - ensure the buffer
is cleared before adding elements.
Link: https://lore.kernel.org/r/20191218235808.31922-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are reports of multiple ports on the same system displaying different
hostnames in fabric FDMI displays.
Currently, the driver registers the hostname at initialization and obtains
the hostname via init_utsname()->nodename queried at the time the FC link
comes up. Unfortunately, if the machine hostname is updated after
initialization, such as via DHCP or admin command, the value registered
initially will be incorrect.
Fix by having the driver save the hostname that was registered with FDMI.
The driver then runs a heartbeat action that will check the hostname. If
the name changes, reregister the FMDI data.
The hostname is used in RSNN_NN, FDMI RPA and FDMI RHBA.
Link: https://lore.kernel.org/r/20191218235808.31922-5-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the WriteObject mailbox response has change_status set to is 0x2
(Firmware Reset) or 0x04 (Port Migration Reset), the CSF field should also
be checked to see if a fw reset is sufficient to enable all new features in
the updated firmware image. If not, a fw reset would start the new
firmware, but with a feature level equal to existing firmware. To enable
the new features, a chip reset/pci slot reset would be required.
Check the CSF bit when change_status is 0x2 or 0x4 to know whether to
perform a pci bus reset or fw reset.
Link: https://lore.kernel.org/r/20191218235808.31922-4-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch reworks the fdmi symbolic node name data for the following two
issues:
- Correcting extraneous periods following the DV and HN fdmi data fields.
- Avoiding buffer overflow issues when formatting the data.
The fix to the fist issue is to just remove the characters.
The fix to the second issue has all data being staged in temporary storage
before being moved to the real buffer.
Link: https://lore.kernel.org/r/20191218235808.31922-3-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
NVMe device re-discovery does not complete. Dev_loss_tmo messages seen on
initiator after recovery from a link disturbance.
The failing case is the following:
When the driver (as a NVME target) receives a PLOGI, the driver initiates
an "unreg rpi" mailbox command. While the mailbox command is in progress,
the driver requests that an ACC be sent to the initiator. The target's ACC
is received by the initiator and the initiator then transmits a PLOGI. The
driver receives the PLOGI prior to receiving the completion for the PLOGI
response WQE that sent the ACC. (Different delivery sources from the hw so
the race is very possible). Given the PLOGI is prior to the ACC completion
(signifying PLOGI exchange complete), the driver LS_RJT's the PRLI. The
"unreg rpi" mailbox then completes. Since PRLI has been received, the
driver transmits a PLOGI to restart discovery, which the initiator then
ACC's. If the driver processes the (re)PLOGI ACC prior to the completing
the handling for the earlier ACC it sent the intiators original PLOGI,
there is no state change for completion of the (re)PLOGI. The ndlp remains
in "PLOGI Sent" and the initiator continues sending PRLI's which are
rejected by the target until timeout or retry is reached.
Fix by: When in target mode, defer sending an ACC for the received PLOGI
until unreg RPI completes.
Link: https://lore.kernel.org/r/20191218235808.31922-2-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arun Easi