mirror of https://gitee.com/openkylin/linux.git
3494 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Wei Yongjun
|
c29e9da56b |
pinctrl: nsp: Fix potential NULL dereference
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = platform_get_resource(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap_nocache(e1, res->start, e2);
Fixes:
|
|
|
Dan Carpenter
|
f90a21c898 |
pinctrl: nsp: off by ones in nsp_pinmux_enable()
The > comparisons should be >= or else we read beyond the end of the
pinctrl->functions[] array.
Fixes:
|
|
|
Niklas Söderlund
|
550b6f7e8c |
pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag
The datasheet does not document any registers to control drive strength,
and no drive strength registers are for this reason described for this
SoC. The flags indicating that drive strength can be controlled are
however set for some pins in the driver.
This leads to a NULL pointer dereference when the sh-pfc core tries to
access the struct describing the drive strength registers, for example
when reading the sysfs file pinconf-pins.
Fix this by removing the SH_PFC_PIN_CFG_DRIVE_STRENGTH from all pins.
Fixes:
|
|
|
Paul Cercueil
|
0084a786ca |
pinctrl: ingenic: Fix inverted direction for < JZ4770
The .gpio_set_direction() callback was setting inverted direction for SoCs older than the JZ4770, this restores the correct behaviour. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Sean Wang
|
5b1c4bf251 |
pinctrl: mt7622: fix a kernel panic when gpio-hog is being applied
When we are explicitly using GPIO hogging mechanism in the pinctrl node,
such as:
&pio {
line_input {
gpio-hog;
gpios = <95 0>, <96 0>, <97 0>;
input;
};
};
A kernel panic happens at dereferencing a NULL pointer: In this case, the
drvdata is still not setup properly yet when it is being accessed.
A better solution for fixing up this issue should be we should obtain the
private data from struct gpio_chip using a specific gpiochip_get_data
instead of a generic dev_get_drvdata.
[ 0.249424] Unable to handle kernel NULL pointer dereference at virtual
address 000000c8
[ 0.257818] Mem abort info:
[ 0.260704] ESR = 0x96000005
[ 0.263869] Exception class = DABT (current EL), IL = 32 bits
[ 0.270011] SET = 0, FnV = 0
[ 0.273167] EA = 0, S1PTW = 0
[ 0.276421] Data abort info:
[ 0.279398] ISV = 0, ISS = 0x00000005
[ 0.283372] CM = 0, WnR = 0
[ 0.286440] [00000000000000c8] user address but active_mm is swapper
[ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 0.298795] Modules linked in:
[ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389
[ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT)
[ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118
[ 0.324140] lr : mtk_hw_set_value+0x30/0x104
[ 0.328557] sp : ffffff800801b6d0
[ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970
[ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000
[ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230
[ 0.348487] x23: 0000000000000003 x22: 0000000000000000
[ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000
[ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0
[ 0.364990] x17: 0000000000006300 x16: 000000000000003f
[ 0.370492] x15: 000000000000000e x14: ffffffffffffffff
[ 0.375993] x13: 0000000000000000 x12: 0000000000000020
[ 0.381494] x11: 0000000000000006 x10: 0101010101010101
[ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007
[ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003
[ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800
[ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003
[ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000
[ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c)
[ 0.421441] Call trace:
[ 0.423968] mtk_hw_pin_field_get+0x28/0x118
[ 0.428387] mtk_hw_set_value+0x30/0x104
[ 0.432445] mtk_gpio_set+0x20/0x28
[ 0.436052] mtk_gpio_direction_output+0x18/0x30
[ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0
[ 0.446333] gpiod_direction_output+0x104/0x114
[ 0.451022] gpiod_configure_flags+0xbc/0xfc
[ 0.455441] gpiod_hog+0x8c/0x140
[ 0.458869] of_gpiochip_add+0x27c/0x2d4
[ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0
[ 0.467976] mtk_pinctrl_probe+0x388/0x400
[ 0.472217] platform_drv_probe+0x58/0xa4
[ 0.476365] driver_probe_device+0x204/0x44c
[ 0.480783] __device_attach_driver+0xac/0x108
[ 0.485384] bus_for_each_drv+0x7c/0xac
[ 0.489352] __device_attach+0xa0/0x144
[ 0.493320] device_initial_probe+0x10/0x18
[ 0.497647] bus_probe_device+0x2c/0x8c
[ 0.501616] device_add+0x2f8/0x540
[ 0.505226] of_device_add+0x3c/0x44
[ 0.508925] of_platform_device_create_pdata+0x80/0xb8
[ 0.514245] of_platform_bus_create+0x290/0x3e8
[ 0.518933] of_platform_populate+0x78/0x100
[ 0.523352] of_platform_default_populate+0x24/0x2c
[ 0.528403] of_platform_default_populate_init+0x94/0xa4
[ 0.533903] do_one_initcall+0x98/0x130
[ 0.537874] kernel_init_freeable+0x13c/0x1d4
[ 0.542385] kernel_init+0x10/0xf8
[ 0.545903] ret_from_fork+0x10/0x18
[ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401)
[ 0.555916] ---[ end trace de8c34787fdad3b3 ]---
[ 0.560722] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 0.560722]
[ 0.570188] SMP: stopping secondary CPUs
[ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill
init! exitcode=0x0000000b
[ 0.574253]
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Sean Wang
|
de227ed796 |
pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_range
If the pinctrl node has the gpio-ranges property, the range will be added
by the gpio core and doesn't need to be added by the pinctrl driver.
But for keeping backward compatibility, an explicit pinctrl_add_gpio_range
is still needed to be called when there is a missing gpio-ranges in pinctrl
node in old dts files.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Sean Wang
|
ae6efcae79 |
pinctrl: mt7622: fix that pinctrl_claim_hogs cannot work
To allow claiming hogs by pinctrl, we cannot enable pinctrl until all
groups and functions are being added done. Also, it's necessary that
the corresponding gpiochip is being added when the pinctrl device is
enabled.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Sean Wang
|
8875059d21 |
pinctrl: mt7622: fix initialization sequence between eint and gpiochip
Because gpichip applied in the driver must depend on mtk eint to implement
the input data debouncing and the translation between gpio and irq, it's
better to keep logic consistent with mtk eint being built prior to gpiochip
being added.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Sean Wang
|
fafa35cce3 |
pinctrl: mt7622: fix error path on failing at groups building
It should be to return an error code when failing at groups building.
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Sean Wang
|
5f591543a9 |
pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller
The function, external interrupt controller, is made as an optional to
mt7622 pinctrl. But if we don't want pio behaves as an external interrupt
controller, it would lead to hw->eint not be created properly and then
will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq
or .set_config. To fix it, check hw->eint before accessing the member.
[ 1.339494] Unable to handle kernel NULL pointer dereference at virtual
address 00000010
[ 1.347857] Mem abort info:
[ 1.350742] ESR = 0x96000005
[ 1.353905] Exception class = DABT (current EL), IL = 32 bits
[ 1.360024] SET = 0, FnV = 0
[ 1.363185] EA = 0, S1PTW = 0
[ 1.366431] Data abort info:
[ 1.369405] ISV = 0, ISS = 0x00000005
[ 1.373363] CM = 0, WnR = 0
[ 1.376437] [0000000000000010] user address but active_mm is swapper
[ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 1.388748] Modules linked in:
[ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344
[ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT)
[ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 1.409221] pc : mtk_eint_find_irq+0x8/0x24
[ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28
[ 1.417749] sp : ffffff800801baf0
[ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40
[ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620
[ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000
[ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010
[ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea
[ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130
[ 1.454018] x17: 000000000000000e x16: 0000000000000007
[ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001
[ 1.464970] x13: 0000000000000001 x12: 0000000000000010
[ 1.470446] x11: 0101010101010101 x10: 0000000000000880
[ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0
[ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0
[ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa
[ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000
[ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd)
[ 1.510210] Call trace:
[ 1.512727] mtk_eint_find_irq+0x8/0x24
[ 1.516677] mtk_gpio_to_irq+0x20/0x28
[ 1.520539] gpiod_to_irq+0x48/0x60
[ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4
[ 1.528804] mmc_start_host+0x6c/0x8c
[ 1.532575] mmc_add_host+0x58/0x7c
[ 1.536168] msdc_drv_probe+0x4fc/0x67c
[ 1.540121] platform_drv_probe+0x58/0xa4
[ 1.544251] driver_probe_device+0x204/0x44c
[ 1.548649] __driver_attach+0x84/0xf8
[ 1.552512] bus_for_each_dev+0x68/0xa0
[ 1.556461] driver_attach+0x20/0x28
[ 1.560142] bus_add_driver+0xec/0x240
[ 1.564002] driver_register+0x98/0xe4
[ 1.567863] __platform_driver_register+0x48/0x50
[ 1.572711] mt_msdc_driver_init+0x18/0x20
[ 1.576932] do_one_initcall+0x98/0x130
[ 1.580886] kernel_init_freeable+0x13c/0x1d4
[ 1.585375] kernel_init+0x10/0xf8
[ 1.588879] ret_from_fork+0x10/0x18
[ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800)
[ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]---
[ 1.603677] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 1.603677]
cc: Kevin Hilman <khilman@baylibre.com>
Cc: stable@vger.kernel.org
Fixes:
|
|
|
Geert Uytterhoeven
|
71fd5d07b7 |
pinctrl: actions: Fix uninitialized error in owl_pin_config_set()
With gcc 4.1.2:
drivers/pinctrl/actions/pinctrl-owl.c: In function ‘owl_pin_config_set’:
drivers/pinctrl/actions/pinctrl-owl.c:336: warning: ‘ret’ may be used uninitialized in this function
Indeed, if num_configs is zero, the uninitialized value will be returned
as an error code.
Fix this by preinitializing it to zero.
Fixes:
|
|
|
Colin Ian King
|
7f57871f39 |
pinctrl: single: Add allocation failure checking of saved_vals
Currently saved_vals is being allocated and there is no check for
failed allocation (which is more likely than normal when using
GFP_ATOMIC). Fix this by checking for a failed allocation and
propagating this error return down the the caller chain.
Detected by CoverityScan, CID#1469841 ("Dereference null return value")
Fixes:
|
|
|
Fabio Estevam
|
bc3322bc16 |
pinctrl: devicetree: Fix pctldev pointer overwrite
Commit |
|
|
Wei Yongjun
|
fb7298e166 |
pinctrl: mediatek: remove redundant return value check of platform_get_resource()
Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Kees Cook
|
a86854d0c5 |
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
Kees Cook
|
3c4211ba8a |
treewide: devm_kmalloc() -> devm_kmalloc_array()
The devm_kmalloc() function has a 2-factor argument form,
devm_kmalloc_array(). This patch replaces cases of:
devm_kmalloc(handle, a * b, gfp)
with:
devm_kmalloc_array(handle, a * b, gfp)
as well as handling cases of:
devm_kmalloc(handle, a * b * c, gfp)
with:
devm_kmalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kmalloc_array(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kmalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kmalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kmalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kmalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kmalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kmalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kmalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kmalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kmalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kmalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kmalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kmalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kmalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kmalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kmalloc(HANDLE, C1 * C2, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kmalloc
+ devm_kmalloc_array
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
Kees Cook
|
6396bb2215 |
treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
Kees Cook
|
6da2ec5605 |
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
|
Linus Torvalds
|
6419945e33 |
This time we have a good set of changes to the core framework that do some
general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlsWxugACgkQrQKIl8bk lSVs2A/9HOMsWeiYx1MESrXw6N2UknWeqeT/b1v8L/VOiptJg+OTExPbzmSylngv AXJAfIkCpguSMh9b310pA3DAzk5docmbQ4zL977yY+KXmOcDooCd34aG5a+tB3ie ugC8T2bQLrJdMp3hsqaKZsYzqe7LoW2NJgoliXDMA/QUBLpvHq+fcu2zOawingTA GNc3LGqP5Op7p09aPK30gtQNqLK5qGpHASa/AY7Y0PXlUeTZ8rmF06fcEAg5shkC CT57Zy2rSFB2RorEJarYXDPLRHMw/jxXtpMVXEy7zuz/3ajvvRiZDHv75+NaBru9 hDt1rzslzexEN4fYzj4AtGYRKyBrHbDaxG1qdIWPWVyoE0CEb+dZ1gH7/Ski5r+s z5D28NogC0T0sey6yWssyG3RLvkPJ5nxUhL++siHm1lbyo16LmhB1+nFvxrlzmBB 0V1xqEa7feYpD+JD66lJFb5ornHLwGtVYBpeiY+hrDR3ddWEe1IxaYGR2p9nHwSS Us/ZQdHIYBVEqoo3+BWnTn+HSQzmd/sqHqWnLlVWUHoomm5nXx18PeS87vFbcPv9 dMr+FFJ3Elubzcy5UZJPfNw+pb+teE7tYGQkQ3nbLRxT1YZOoIJZJDqNKxM1cgne 6c/VXJMEyBBn/w7Iru/3eWCZVQJGlmYS47DFDzduFvd3LMfmKIM= =KK/v -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ... |
|
|
Linus Torvalds
|
edb2a385ec |
This is the bulk of pin control changes for v4.18.
No core changes this time! Just a calm all-over-the-place
drivers, updates and fixes cycle as it seems.
New drivers/subdrivers:
- Actions Semiconductor S900 driver with more Actions
variants for S700, S500 in the pipe. Also generic GPIO
support on top of the same driver and IRQ support is in
the pipe.
- Renesas r8a77470 PFC support.
- Renesas r8a77990 PFC support.
- Allwinner Sunxi H6 R_PIO support.
- Rockchip PX30 support.
- Meson Meson8m2 support.
- Remove support for the ill-fated Samsung Exynos 5440 SoC.
Improvements:
- Context save/restore support in pinctrl-single.
- External interrupt support for the Mediatek MT7622.
- Qualcomm ACPI HID QCOM8002 supported.
Fixes:
- Fix up suspend/resume support for Exynos 5433.
- Fix Strago DMI fixes on the Intel Cherryview.
-----BEGIN PGP SIGNATURE-----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=6On2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for v4.18.
No core changes this time! Just a calm all-over-the-place drivers,
updates and fixes cycle as it seems.
New drivers/subdrivers:
- Actions Semiconductor S900 driver with more Actions variants for
S700, S500 in the pipe. Also generic GPIO support on top of the
same driver and IRQ support is in the pipe.
- Renesas r8a77470 PFC support.
- Renesas r8a77990 PFC support.
- Allwinner Sunxi H6 R_PIO support.
- Rockchip PX30 support.
- Meson Meson8m2 support.
- Remove support for the ill-fated Samsung Exynos 5440 SoC.
Improvements:
- Context save/restore support in pinctrl-single.
- External interrupt support for the Mediatek MT7622.
- Qualcomm ACPI HID QCOM8002 supported.
Fixes:
- Fix up suspend/resume support for Exynos 5433.
- Fix Strago DMI fixes on the Intel Cherryview"
* tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: cherryview: limit Strago DMI workarounds to version 1.0
pinctrl: at91-pio4: add missing of_node_put
pinctrl: armada-37xx: Fix spurious irq management
gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls
pinctrl: msm: fix gpio-hog related boot issues
MAINTAINERS: update entry for Mediatek pin controller
pinctrl: mediatek: remove unused fields in struct mtk_eint_hw
pinctrl: mediatek: use generic EINT register maps for each SoC
pinctrl: mediatek: add EINT support to MT7622 SoC
pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit
dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl
pinctrl: freescale: Switch to SPDX identifier
pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks
pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
pinctrl: sh-pfc: r8a77965: Add I2C pin support
pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
pinctrl: sh-pfc: r8a77990: Add bias pinconf support
pinctrl: sh-pfc: Initial R8A77990 PFC support
...
|
|
|
Linus Torvalds
|
2857676045 |
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=/3L8
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"This adds the new overflow checking helpers and adds them to the
2-factor argument allocators. And this adds the saturating size
helpers and does a treewide replacement for the struct_size() usage.
Additionally this adds the overflow testing modules to make sure
everything works.
I'm still working on the treewide replacements for allocators with
"simple" multiplied arguments:
*alloc(a * b, ...) -> *alloc_array(a, b, ...)
and
*zalloc(a * b, ...) -> *calloc(a, b, ...)
as well as the more complex cases, but that's separable from this
portion of the series. I expect to have the rest sent before -rc1
closes; there are a lot of messy cases to clean up.
Summary:
- Introduce arithmetic overflow test helper functions (Rasmus)
- Use overflow helpers in 2-factor allocators (Kees, Rasmus)
- Introduce overflow test module (Rasmus, Kees)
- Introduce saturating size helper functions (Matthew, Kees)
- Treewide use of struct_size() for allocators (Kees)"
* tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use struct_size() for devm_kmalloc() and friends
treewide: Use struct_size() for vmalloc()-family
treewide: Use struct_size() for kmalloc()-family
device: Use overflow helpers for devm_kmalloc()
mm: Use overflow helpers in kvmalloc()
mm: Use overflow helpers in kmalloc_array*()
test_overflow: Add memory allocation overflow tests
overflow.h: Add allocation size calculation helpers
test_overflow: Report test failures
test_overflow: macrofy some more, do more tests for free
lib: add runtime test of check_*_overflow functions
compiler.h: enable builtin overflow checkers and add fallback code
|
|
|
Kees Cook
|
0ed2dd03b9 |
treewide: Use struct_size() for devm_kmalloc() and friends
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org> |
|
|
Dmitry Torokhov
|
86c5dd6860 |
pinctrl: cherryview: limit Strago DMI workarounds to version 1.0
As Google/Intel will fix the BIOS/Coreboot issues with hardcoding virtual interrupt numbers for keyboard/touchpad/touchscreen controllers in ACPI tables, they will also update BOARD version number from 1.0 to 1.1. Let's limit the DMI quirks that try to preserve virtual IRQ numbers on Strago boards to those that still carry older BIOSes. Note that ideally not BOARD but BIOS version should have been updated. However the BIOS version used by Chrome devices has format of Google_BUILD.BRANCH.PATCH which is not well suited for DMI matching as we do not have "less than" match mode for DMI data. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Ludovic Barre
|
c12fcfb12e |
pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
-Parent domain of stm32gpio evolves to hierarchy domain and could have a handle_fasteoi_irq. So an irq_eoi parent callback is needed for children. -Replace space by tabulation. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
|
|
Julia Lawall
|
2181636471 |
pinctrl: at91-pio4: add missing of_node_put
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Terry Zhou
|
702d1e81fe |
pinctrl: armada-37xx: Fix spurious irq management
Until now, if we found spurious irq in irq_handler, we only updated the
status in register but not the status in the code. Due to this the system
will got stuck dues to the infinite loop
[gregory.clement@bootlin.com: update comment and add fix and stable tags]
Fixes:
|
|
|
Christian Lamparter
|
a86caa9ba5 |
pinctrl: msm: fix gpio-hog related boot issues
Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
Setting up any gpio-hog in the device-tree for his device would
"kill the bootup completely":
| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
This was also verified on a RT-AC58U (IPQ4018) which would
no longer boot, if a gpio-hog was specified. (Tried forcing
the USB LED PIN (GPIO0) to high.).
The problem is that Pinctrl+GPIO registration is currently
peformed in the following order in pinctrl-msm.c:
1. pinctrl_register()
2. gpiochip_add()
3. gpiochip_add_pin_range()
The actual error code -517 == -EPROBE_DEFER is coming from
pinctrl_get_device_gpio_range(), which is called through:
gpiochip_add
of_gpiochip_add
of_gpiochip_scan_gpios
gpiod_hog
gpiochip_request_own_desc
__gpiod_request
chip->request
gpiochip_generic_request
pinctrl_gpio_request
pinctrl_get_device_gpio_range
pinctrl_get_device_gpio_range() is unable to find any valid
pin ranges, since nothing has been added to the pinctrldev_list yet.
so the range can't be found, and the operation fails with -EPROBE_DEFER.
This patch fixes the issue by adding the "gpio-ranges" property to
the pinctrl device node of all upstream Qcom SoC. The pin ranges are
then added by the gpio core.
In order to remain compatible with older, existing DTs (and ACPI)
a check for the "gpio-ranges" property has been added to
msm_gpio_init(). This prevents the driver of adding the same entry
to the pinctrldev_list twice.
Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
Sean Wang
|
ca071afedb |
pinctrl: mediatek: remove unused fields in struct mtk_eint_hw
The .name field has been not being used in existent code logic, so it's better that we remove them all. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Sean Wang
|
e6612a6974 |
pinctrl: mediatek: use generic EINT register maps for each SoC
So far, EINT on each SoC all used exactly identical register map and thus it's better that we apply generic register map already supported in EINT library and stop copy-n-pasting the same data block and filling into its platform data. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Sean Wang
|
e6dabd38d8 |
pinctrl: mediatek: add EINT support to MT7622 SoC
Add EINT support to MT7622 SoC and the support is made as just an option to MT7622 pinctrl. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Sean Wang
|
e46df235b4 |
pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit
This patch is in preparation for adding EINT support to MT7622 pinctrl, and the refactoring doesn't alter any existent logic. A reason we have to refactor EINT code pieces into a generic way is that currently, they're tightly coupled with a certain type of MediaTek pinctrl would cause a grown in a very bad way as there is different types of pinctrl devices getting to join. Therefore, it is an essential or urgent thing that EINT code pieces are refactored to eliminate any dependencies across GPIO and EINT as possible. Additional structure mtk_eint_[xt, hw, regs] are being introduced for indicating how maps being designed between GPIO and EINT hw number, how to set and get GPIO state for a certain EINT pin, what characteristic on a EINT device is present on various SoCs. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Fabio Estevam
|
c2b39deced |
pinctrl: freescale: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Linus Walleij
|
de8a6c672f |
Samsung pinctrl drivers changes for v4.18
1. Driver expects specific order of GPIO interrupt banks. For S5Pv220
and Exynos5410 this order was not preserved so fix and document it.
2. Remove support for Exynos5440 (tree-wide, support is dropped because
there are no real users of this platform, it also did not get testing
since long time).
3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.
-----BEGIN PGP SIGNATURE-----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=7nCe
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v4.18
1. Driver expects specific order of GPIO interrupt banks. For S5Pv220
and Exynos5410 this order was not preserved so fix and document it.
2. Remove support for Exynos5440 (tree-wide, support is dropped because
there are no real users of this platform, it also did not get testing
since long time).
3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.
|
|
|
Linus Walleij
|
316a67b770 |
pinctrl: sh-pfc: Updates for v4.18 (take two)
- Add support for the new R-Car E3 SoC, - Add I2C pin groups on R-Car M3-N, - Small fixes and cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJbBWP7AAoJEEgEtLw/Ve77vLQQAJUvsQkynQ415tVpxFbFi1NT jXDunV31hShy3qyfXdxF7lDgQtfwCgho7Pyay47AERHzmK0MQFbQvfNi4631hJ50 CvfYS+/tmVQhyZYO5PiXHvQ5JvgpWa1RlstWDaVQP2O311kj635JdoDkIdYzUjZL /9hW8S/CAhmzrKb3tSlmW652bwX/6FKGXrLF4p49DXx+57yTZ6ORD5GkKGbCmD9Z cO/tPmjtAWkpdR9MXKInu7pwMSakycrtJdtx1tOx4DJ5L9WCP75LawwcbUVmbuQZ Pdjdz9hbndNHaCpj9jsSUYIeZ/1K0eqDj/X8Hjr5DxWugDKzl2u45U2BnSkyCFRL xLqqmhQR4LCCl1sKioxJa+Fv6aUmr9KFpqdlX20EiiPwfTnpVd22ClAfqQ5IGs3w u7i7fAaaeDf0cFS/I/8+0RZQp5DZgh/z2mTREwIJ7VFTQCqXWpDM1YTBl0W0k4k/ Nl5WveFYaSIqbXgRyYWBjuALrMAZXsYvRax1UZLEVW4nYWl26GOfKA3i30clc8uG vluvV4glI3tWK/WLBoKYW2gItCDPhj3b72+U8A4pf8yBi4I9tOL+bcq3Ze2v6M66 yGPzJ7kjQMyy4i3dyGuwOwXVy1CsNHRc1Gcm1vwcShNNrhlz7eKq8A+uDHoybPpD uwcI1s+/Jqfw+7WUufIQ =xeSy -----END PGP SIGNATURE----- Merge tag 'sh-pfc-for-v4.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.18 (take two) - Add support for the new R-Car E3 SoC, - Add I2C pin groups on R-Car M3-N, - Small fixes and cleanups. |
|
|
Marek Szyprowski
|
7c24e71c8a |
pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks
GPF1..5 banks in Exynos5433 are located in two pinctrl devices: ALIVE and IMEM. Although they are partially located in ALIVE section, the state of their registers in IMEM section is lost after suspend/resume cycle. To properly handle such case, those banks have to be defined with standard 'exynos5433_bank_type_off' type (with PINCFG_TYPE_CON_PDN and PINCFG_TYPE_PUD_PDN register offsets). This automatically instructs the generic Samsung pinctrl suspend/resume code to save and restore state of those registers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
|
|
Geert Uytterhoeven
|
db701f4bea |
pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments
The comment block explaining the rationale for static pins contains grammar errors. It appeared first in the pin control driver for R-Car H3 ES1.x, and spread to R-Car M3-W, H3 ES2.0, and M3-N later. Fix the grammar in all copies at once. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> |
|
|
Niklas Söderlund
|
82540ebcc7 |
pinctrl: sh-pfc: r8a77965: Add I2C pin support
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Takeshi Kihara
|
7cf9733f69 |
pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions
This patch adds group and function of AVB PHY, LINK, MAGIC, MII and PTP pins for the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Takeshi Kihara
|
33f8dadc27 |
pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions
This patch adds I2C{1,2,4,5,6,7} pins, groups and functions to
the R8A77990 SoC.
NOTE: I2C0 and I2C3 are not pin multiplexed.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
Takeshi Kihara
|
6d3789e705 |
pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions
This patch adds SCIF{0,1,2,3,4,5} pins, groups and functions to R8A77990
SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
Takeshi Kihara
|
83f6941a42 |
pinctrl: sh-pfc: r8a77990: Add bias pinconf support
This patch implements control of pull-up and pull-down. On this SoC there is no simple mapping of GP pins to bias register bits, so we need a table. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Takeshi Kihara
|
6d4036a1e3 |
pinctrl: sh-pfc: Initial R8A77990 PFC support
This patch adds initial pinctrl driver to support for the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Takeshi Kihara
|
ec96db5868 |
pinctrl: sh-pfc: Add PORT_GP_11 helper macro
This follows the style of existion PORT_GP_X macros and will be used by a follow-up patch for the r8a77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> |
|
|
Jisheng Zhang
|
c6114f21e2 |
pinctrl: berlin: switch to SPDX license identifier
Use the appropriate SPDX license identifier in the berlin pinctrl driver source file and drop the previous license text. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Shawn Lin
|
b97038af5e |
pinctrl: rockchip: Add set_config callback support for gpiolib
Could only support PIN_CONFIG_INPUT_DEBOUNCE now as the HW block is too simple to support others. But even wrt. debounce capability, it now could only support very limited period of time to satisfy the real usecase. But still be useful to enable the crippled HW debounce to prevent any spurious glitches from waking up the system if the gpio is conguired as wakeup interrupt source. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
David Wu
|
87065ca9b8 |
pinctrl: rockchip: Add pinctrl support for PX30
There are 4 banks (GPIO0 ~ GPIO3), bank0 is in PD_PMU subsystem, bank1/bank2/bank3 are in PD_BUS subsystem. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Chris Packham
|
f61f5a2174 |
pinctrl: mvebu: update use "nand" function for "rb" pin
The Armada 98dx3236 SoCs don't have a different MPP sel value for nand specific pins so "dev" was technically correct. But all the other Armada SoCs use "nand" in their dts and the pin is specific to the nand interface so use "nand" for the function name. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Manivannan Sadhasivam
|
33257f860a |
pinctrl: actions: Add gpio support for Actions S900 SoC
Add gpio support to pinctrl driver for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Keerthy
|
88a1dbdec6 |
pinctrl: pinctrl-single: Add functions to save and restore pinctrl context
This adds a pair of context save/restore functions to save/restore the state of a set of pinctrl registers. The context is lost during rtc only suspend with ddr in self-refresh on am43xx. Currently the save/restore is being done unconditionally. This will be optimized later with a pdata-quirk function which will allow is to save/restore only when doing the rtc only mode with ddr in self refresh. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Yixun Lan
|
c0136ef651 |
pinctrl: nand: meson-gxl: fix missing data pins
The data pin 0-7 of the NAND controller are actually missing from
the nand pinctrl group, so we fix it here.
Fixes:
|