v2: fix for all sdma engines
v3: squash in fix for SI/CI
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. security firmware loading has moved to sw init, so this code
is useless.
2. it seems that driver could not call request_firmware on
kernel 2.6, when S3 resume. for request firmware depends on
userspace, at this time, userspace is freeze.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
decrease and also reserve priority number for KFD using
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When VRAM pressue and trigger huge evictions there is performance drop,
this patch fix it.
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the VM fault message format and use rate-limiting similar
to other ASICs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RB harvest registers are not necessary, the driver already
exposes this info via the info ioctl. GB_BACKEND_MAP has
been deprecated since SI and is not relevant to the RB mapping.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for SR-IOV and saves MMIO transactions.
v2: drop cached RB harvest registers
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We check the mem config register to make sure it's been
programmed by the vbios to determine if we need to post
so we check for a non-0 value. However, when the asic
comes out of reset, we may see all ones here, so check
for that too.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This used by DAL ISR logic for VBLANK handling.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Adapt to vulkan:
Now use double SWITCH BUFFER to replace the 128 nops w/a,
because when vulkan introduced, umd can insert 7 ~ 16 IBs
per submit which makes 256 DW size cannot hold the whole
DMAframe (if we still insert those 128 nops), CP team suggests
use double SWITCH_BUFFERs, instead of tricky 128 NOPs w/a.
2) To fix the CE VM fault issue when MCBP introduced:
Need one more COND_EXEC wrapping IB part (original one us
for VM switch part).
this change can fix vm fault issue caused by below scenario
without this change:
>CE passed original COND_EXEC (no MCBP issued this moment),
proceed as normal.
>DE catch up to this COND_EXEC, but this time MCBP issued,
thus DE treats all following packages as NOP. The following
VM switch packages now looks just as NOP to DE, so DE
dosen't do VM flush at all.
>Now CE proceeds to the first IBc, and triggers VM fault,
because DE didn't do VM flush for this DMAframe.
3) change estimated alloc size for gfx9.
with new DMAframe scheme, we need modify emit_frame_size
for gfx9
4) No need to insert 128 nops after gfx8 vm flush anymore
because there was double SWITCH_BUFFER append to vm flush,
and for gfx7 we already use double SWITCH_BUFFER following
after vm_flush so no change needed for it.
5) Change emit_frame_size for gfx8
v2: squash in BUG removal from Monk
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those MC_VM registers won't be programed by VBIOS in VF
so driver is responsible to programe them.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring_write_multiple should use buf_mask instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV we cannot use access register when in IRQ routine
with regular KIQ method
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no CG for SRIOV on SOC15
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no hw_fini for SRIOV, otherwise other VF will be affected
no CG for SRIOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
must set minor_update.enable before write smaller value
to wptr/doorbell, so for sriov we need set that register
bit in hw_init period.
this could fix the SDMA ring test fail after guest reboot
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring->buf_mask need be set prior to ring_clear_ring invoke
and fix ring_clear_ring as well which should use buf_mask
instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this must be invoked during early init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when MCBP supported, we will set pre_enb bit for those
IBs with PREEMPT flag tagged
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Preamble in linux doesn't mean it is CE PREAMBLE IB,
instead it means this IB could be dropped if no
ctx switch happens.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the new IB during IB emit for SRIOV with MCBP
v2: agd: use define instead of magic number
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set bit 21 of IB.control filed to actually enable
MCBP for SRIOV
v2:
add flag for preemption enable bit for soc15 and use
this flag instead of hardcode.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when MCBP enabled for gfx8, the cond_exec must also
be implemented, otherwise there will be odds to meet
cross engine (ce and me) deadlock when world switch
happens.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,the check is only appliable for SRIOV GFX engine.
2,use chunk_ib instead of ib.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to prevent submit two or more IBs with PREEMPT flags.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should use chunk_ib instead of ib, otherwise the logic
is incorrect.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also, add the fence of the clear operations to the BO to ensure that
the underlying memory can only be re-used after all PTEs pointing to
it have been cleared.
This avoids the following sequence of events that could be triggered
by user space:
1. Submit a CS that accesses some BO _without_ adding that BO to the
buffer list.
2. Free that BO.
3. Some other task re-uses the memory underlying the BO.
4. The CS is submitted to the hardware and accesses memory that is
now already in use by somebody else.
By clearing the page tables immediately in step 2, a GPU VM fault will
be triggered in step 4 instead of wild memory accesses.
v2: use amdgpu_bo_fence directly
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate and free page directories on demand.
V2:
a. clear entries allocation
b. fix entries index calculation
c. need alloc sub level even parent bo was allocated
Signed-off-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (v2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not the best solution, but good enough for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update all levels of the page directory.
V2:
a. sub level pdes always are written to incorrect place.
b. sub levels need to update regardless of parent updates.
Signed-off-by: Christian König <christian.koenig@amd.com> (V1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (V1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (V2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (V2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move all levels to the end after command submission.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All page directory levels should be in place after this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to get the size for all levels as well.
v2: agd: fix warning
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, but the base for multi level page tables.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be filled with handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we save passing it through the different functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decribes better what this is used for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for power readings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang