Use a less generic name for this internal header file included by
various parts of the comedi core.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A couple of global variables in "comedi_fops.c" are only referenced from
that .c file and can be declared 'static'. Also remove them from
"comedi_fops.h" where they are declared 'extern'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I forgot a license for the csr_helper module, so it would not properly
load as it depends on other GPL-only symbols.
Reported-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This brings the in-kernel driver up to the level of the
csr-linux-wifi-5.1.0-oss.tar.gz tarball.
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This consists of two modules, the driver, and a "helper" module that is
just a wrapper around common kernel functions. The wrapper module will
be removed soon, but for now it's needed.
These files were based on the csr-linux-wifi-5.0.3-oss.tar.gz package
provided by CSR and Blue Giga, and is covered under the license
specified in the LICENSE.txt file (basically dual BSD and GPLv2). The
files were flattened out of the deep directory mess they were originally
in, and a few EXPORT_SYMBOL_GPL() were added in order for everything to
link properly with the helper module setup.
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This module is used by the CSR wifi driver to "abstract" away the
OS-specific parts of core functions. It will be eventually deleted, but
for now is needed as the CSR driver relies on it.
Cc: Mikko Virkkilä <mikko.virkkila@bluegiga.com>
Cc: Lauri Hintsala <Lauri.Hintsala@bluegiga.com>
Cc: Riku Mettälä <riku.mettala@bluegiga.com>
Cc: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_COMPAT is not defined, comedi_compat_ioctl should be
NULL not 0 in order to set the file_operations compat_ioctl variable
correctly.
This quiets a sparse warning about:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_async 'inttrig' member is a pointer to a callback
function. NULL should be used to clear it not 0.
This quiets a number of sparse warnings about:
Warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
beware, does change the ABI as proximity_on_chip_ambient_infrared_supression
is changed to proximity_on_chip_ambient_infrared_suppression
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
just drop execute permission
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
The previous code was not passing the temperature channel to iio_buffer_register
since the temperature channel can not be used in buffered mode. With the new
helper functions it is not possible to do this, instead the scan index for the
temperature channel is set to -1 which will cause iio_buffer_register to ignore
the channel. (Also While we are at it also assign the symbolic constant instead
of the raw value to the channel address for the temperature channel).
Also as part of the conversion drop scan_timestamp being enabled by default,
since it is a left over of an earlier cleanup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the new triggered buffer setup helper function to allocate and register
buffer and pollfunc.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper function for executing the common tasks which are usually involved
in setting up a simple software ringbuffer. It will allocate the buffer,
allocate the pollfunc and register the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is not always the case that all channels can be used in buffered mode. This
patch allows channels, which can not be used in buffered mode, to set their scan
index to a negative number, which will cause iio_buffer_register to ignore the
channel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo found while reading through staging/slicoss
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes some typos that was found while reading through staging/serqt_usb2
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace pr_* calls with dev_* ones when the device structure is available.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add include files with function definitions to avoid sparse warnings.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XGIFAIL() prints a message and returns a value, but it's used only in one
place. Better remove it and replace the call with the macro content.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define real content of dumpVGAReg() only in debug mode. Remove old condition.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove DEBUGPRN() macro which is defined as empty.
Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'io_bits' variable in the comedi_subdevice struct is a bitmask of
the input/output configuration of the the subdevice. It should be an
unsigned int to correctly represent this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess: <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi core does the sanity check to make sure that the data length
the INSN_BITS instruction is 2. There is no need for the drivers to do
this check. Remove all the sanity checks in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the usbduxsigma driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Move the release of the driver's static 'start_stop_sem' semaphore in
usbduxsigma_attach() to occur a bit later for convenience, otherwise the
new usbduxsigma_attach_common() would need to be split in two. I don't
think the slight delay in releasing the semaphore matters too much; it's
only used in the USB probe and disconnect functions and when attaching
and detaching comedi devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the vmv80xx driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the usbduxfast driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous set of patches by Ravishankar Karkala Mallikarjunayya
replaced a load of printk() calls with dev_info(), dev_err(), etc.
Unfortunately, these used the 'struct device *hw_dev' member of 'struct
comedi_device') as the first parameter of these dev_...() calls, but
that pointer is usually NULL, so the kernel log messages come out a bit
wrong (they contain the phrase "(NULL device *)").
Use the 'struct device *class_dev' member of 'struct comedi_device'
instead for these dev_...() calls. It will be non-NULL and somewhat
meaningful to users. It's also consistent with those comedi drivers
that already use the class_dev member in their dev_...() calls.
Some of the messages included the format "comedi%d" with the minor
device number used for the "%d". This is now redundant as it will be
the same as the dev_name() part of the kernel log message produced by
the dev_...() calls.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A local static variable was declared as a pointer to a string
constant. We're assigning to the underlying memory, so it
needs to be an array instead.
Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The depends on PCCARD is redundant. All of the comedi PCMCIA
drivers depend on PCMCIA which can only be enabled if PCCARD
is enabled. Remove the extra depends check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.
Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IIO_ALTVOLTAGE is used by frequency/adf4350 and frequency/ad9523
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott