Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host. The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk. This method fails when the modems are forced to
USB2 mode by the modem firmware.
Fix by unconditionally enabling the DTR quirk for the
affected device IDs.
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede says:
====================
r8169 (x86) clk fixes to fix S0ix not being reached
This series adds code to the r8169 ethernet driver to get and enable an
external clock if present, avoiding the need for a hack in the
clk-pmc-atom driver where that clock was left on continuesly causing x86
some devices to not reach deep power saving states (S0ix) when suspended
causing to them to quickly drain their battery while suspended.
The 3 commits in this series need to be merged in order to avoid
regressions while bisecting. The clk-pmc-atom driver does not see much
changes (it was last touched over a year ago). So the clk maintainers
have agreed with merging all 3 patches through the net tree.
All 3 patches have Stephen Boyd's Acked-by for this purpose.
This v2 of the series only had some minor tweaks done to the commit
messages and is ready for merging through the net tree now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d31fd43c0f ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.
This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some boards a platform clock is used as clock for the r8169 chip,
this commit adds support for getting and enabling this clock (assuming
it has an "ether_clk" alias set on it).
This is related to commit d31fd43c0f ("clk: x86: Do not gate clocks
enabled by the firmware") which is a previous attempt to fix this for some
x86 boards, but this causes all Cherry Trail SoC using boards to not reach
there lowest power states when suspending.
This commit (together with an atom-pmc-clk driver commit adding the alias)
fixes things properly by making the r8169 get the clock and enable it when
it needs it.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d31fd43c0f ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.
This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Intel SoC was prevented from entering lower idle state because
of RTL8106E's ASPM was not enabled.
So enable ASPM on RTL8106E (chip version 39).
Now the Intel SoC can enter lower idle state, power consumption and
temperature are much lower.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a small delay after setting ASPM in vendor drivers, r8101 and
r8168.
In addition, those drivers enable ASPM before ClkReq, also change that
to align with vendor driver.
I haven't seen anything bad becasue of this, but I think it's better to
keep in sync with vendor driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code assumes kcm users know they need to look for the
strparser offset within their bpf program, which is not documented
anywhere and examples laying around do not do.
The actual recv function does handle the offset well, so we can create a
temporary clone of the skb and pull that one up as required for parsing.
The pull itself has a cost if we are pulling beyond the head data,
measured to 2-3% latency in a noisy VM with a local client stressing
that path. The clone's impact seemed too small to measure.
This bug can be exhibited easily by implementing a "trivial" kcm parser
taking the first bytes as size, and on the client sending at least two
such packets in a single write().
Note that bpf sockmap has the same problem, both for parse and for recv,
so it would pulling twice or a real pull within the strparser logic if
anyone cares about that.
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Daniel Vetter, we should be usinng
drm_drv_uses_atomic_modeset() for determining whether or not we want to
make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as
the former isn't an accurate representation of whether or not the driver
is actually using atomic modesetting internally (even though it might
not be exposing atomic capabilities).
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.
After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.
Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
Cc: stable@vger.kernel.org
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer <jbehmer@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As well as one driver fix there's a couple of fixes here which address
issues with the use of IDRs for allocation of dynamic bus numbers,
ensuring that dynamic bus numbers interact well with static bus numbers
assigned via DT and otherwise.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluf2foTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DooB/4/c+c9nX31WeKh5EUFS3WJUQ4quHC+
ZPS0rqliJm0KQxdSCU6ig2+xbobZWAs9T4ZXPlE7PNk6DmqdtATS5jlzbwmoLvdA
PvxsBwz3dRdIGR/BNbDYEZCb0WGtMHO6BR5c//lBCy+ea5oNENi0w0mFnY+AVeUt
ivM55i/nNmV4DReT3rl5mRz/TQgfI9zc11DPpqDnlQML3emYHmJ+hZa8/1g68d8C
lQHLIQMo6hGyOd3p6uPODGt98cDKIuYl9+fcYVzYFScNshwuMsxTDUXpkhv85Frb
QV6LGlikaEQBh9X9BHjzTHMBqbTFVLX/I+jRC/vK2G21862rfOt3R6vh
=rRj7
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Mark writes:
"spi: Fixes for v4.19
As well as one driver fix there's a couple of fixes here which address
issues with the use of IDRs for allocation of dynamic bus numbers,
ensuring that dynamic bus numbers interact well with static bus numbers
assigned via DT and otherwise."
* tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE
spi: Fix double IDR allocation with DT aliases
spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluf2AQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BojB/9ZpiRgSSjKTFSmGgu3OFI7Nvj63ruB
hxOnwOc8Bea8tZtpzgEcx/aLZ1sbWVT4uRUYZv0Tf6UJtuOQagbJDEUkUdRitKtX
1khSMyKFlAa7cIbv19ZOMCN0pjcs7hlHCPryT8AyCWCWN8yPdlUsDqWfyfUoq56r
qpdu/OQ4E9VvS8OcX1gPjcop3gE/fYEoU+mbUpr0KYUXaroEzJm85tOqpGYk4+XW
GCNUR19vNRJr5G6ANqIx96JOlgF5nRZu7aOfvLceiWH5BgPdW3iNRAJkPmKCIHwb
a1+X21eCC7Ec2/7bQmR5Aoxz1yqzhngrevSFNLrqXFZmMmNrEfkfdCrJ
=gVzO
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.19
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
Fix the following compile warning:
drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: lan743x_pm_suspend defined but not used [-Wunused-function]
static int lan743x_pm_suspend(struct device *dev)
drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: lan743x_pm_resume defined but not used [-Wunused-function]
static int lan743x_pm_resume(struct device *dev)
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a cut/paste error and a typo which results in ATU miss violations
not being reported.
Fixes: 0977644c50 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In kTLS MSG_PEEK behavior is currently failing, strace example:
[pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[pid 2430] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
[pid 2430] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2430] listen(4, 10) = 0
[pid 2430] getsockname(4, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
[pid 2430] connect(3, {sa_family=AF_INET, sin_port=htons(38855), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2430] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2430] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2430] accept(4, {sa_family=AF_INET, sin_port=htons(49636), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
[pid 2430] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2430] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2430] close(4) = 0
[pid 2430] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
[pid 2430] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
[pid 2430] recvfrom(5, "test_read_peektest_read_peektest"..., 64, MSG_PEEK, NULL, NULL) = 64
As can be seen from strace, there are two TLS records sent,
i) 'test_read_peek' and ii) '_mult_recs\0' where we end up
peeking 'test_read_peektest_read_peektest'. This is clearly
wrong, and what happens is that given peek cannot call into
tls_sw_advance_skb() to unpause strparser and proceed with
the next skb, we end up looping over the current one, copying
the 'test_read_peek' over and over into the user provided
buffer.
Here, we can only peek into the currently held skb (current,
full TLS record) as otherwise we would end up having to hold
all the original skb(s) (depending on the peek depth) in a
separate queue when unpausing strparser to process next
records, minimally intrusive is to return only up to the
current record's size (which likely was what c46234ebb4
("tls: RX path for ktls") originally intended as well). Thus,
after patch we properly peek the first record:
[pid 2046] wait4(2075, <unfinished ...>
[pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[pid 2075] socket(AF_INET, SOCK_STREAM, IPPROTO_IP) = 4
[pid 2075] bind(4, {sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2075] listen(4, 10) = 0
[pid 2075] getsockname(4, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0
[pid 2075] connect(3, {sa_family=AF_INET, sin_port=htons(55115), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
[pid 2075] setsockopt(3, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2075] setsockopt(3, 0x11a /* SOL_?? */, 1, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2075] accept(4, {sa_family=AF_INET, sin_port=htons(45732), sin_addr=inet_addr("127.0.0.1")}, [16]) = 5
[pid 2075] setsockopt(5, SOL_TCP, 0x1f /* TCP_??? */, [7564404], 4) = 0
[pid 2075] setsockopt(5, 0x11a /* SOL_?? */, 2, "\3\0033\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 40) = 0
[pid 2075] close(4) = 0
[pid 2075] sendto(3, "test_read_peek", 14, 0, NULL, 0) = 14
[pid 2075] sendto(3, "_mult_recs\0", 11, 0, NULL, 0) = 11
[pid 2075] recvfrom(5, "test_read_peek", 64, MSG_PEEK, NULL, NULL) = 14
Fixes: c46234ebb4 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger says:
====================
hv_netvsc: associate VF and PV device by serial number
The Hyper-V implementation of PCI controller has concept of 32 bit serial number
(not to be confused with PCI-E serial number). This value is sent in the protocol
from the host to indicate SR-IOV VF device is attached to a synthetic NIC.
Using the serial number (instead of MAC address) to associate the two devices
avoids lots of potential problems when there are duplicate MAC addresses from
tunnels or layered devices.
The patch set is broken into two parts, one is for the PCI controller
and the other is for the netvsc device. Normally, these go through different
trees but sending them together here for better review. The PCI changes
were submitted previously, but the main review comment was "why do you
need this?". This is why.
v2 - slot name can be shorter.
remove locking when creating pci_slots; see comment for explaination
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Matching network device based on MAC address is problematic
since a non VF network device can be creted with a duplicate MAC
address causing confusion and problems. The VMBus API does provide
a serial number that is a better matching method.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.
When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.
There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.
This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent commit to always forward the VF MAC address to the PF for
approval may not work if the PF driver or the firmware is older. This
will cause the VF driver to fail during probe:
bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): hwrm req_type 0xf seq id 0x5 error 0xffff
bnxt_en 0000:00:03.0 (unnamed net_device) (uninitialized): VF MAC address 00:00:17:02:05:d0 not approved by the PF
bnxt_en 0000:00:03.0: Unable to initialize mac address.
bnxt_en: probe of 0000:00:03.0 failed with error -99
We fix it by treating the error as fatal only if the VF MAC address is
locally generated by the VF.
Fixes: 707e7e9660 ("bnxt_en: Always forward VF MAC address to the PF.")
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Reported-by: Siwei Liu <loseweigh@gmail.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the unlikely case ip6_xmit() has to call skb_realloc_headroom(),
we need to call skb_set_owner_w() before consuming original skb,
otherwise we risk a use-after-free.
Bring IPv6 in line with what we do in IPv4 to fix this.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The operation ~(p100_inb(VG_LAN_CFG_1) & HP100_LINK_UP) returns a value
that is always non-zero and hence the wait for the link to drop always
terminates prematurely. Fix this by using a logical not operator instead
of a bitwise complement. This issue has been in the driver since
pre-2.6.12-rc2.
Detected by CoverityScan, CID#114157 ("Logical vs. bitwise operator")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need this new compatibility string as we experienced different behavior
for this 10/100Mbits/s macb interface on this particular SoC.
Backward compatibility is preserved as we keep the alternative strings.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new configuration for the sama5d3-macb new compatibility string.
This configuration disables scatter-gather because we experienced lock down
of the macb interface of this particular SoC under very high load.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Net drivers using phylink shouldn't mess with the link carrier
themselves and should let phylink manage it. The mvpp2 driver wasn't
following this best practice as the mac_config() function made calls to
change the link carrier state. This led to wrongly reported carrier link
state which then triggered other issues. This patch fixes this
behaviour.
But the PPv2 driver relied on this misbehaviour in two cases: for fixed
links and when not using phylink (ACPI mode). The later was fixed by
adding an explicit call to link_up(), which when the ACPI mode will use
phylink should be removed.
The fixed link case was relying on the mac_config() function to set the
link up, as we found an issue in phylink_start() which assumes the
carrier is off. If not, the link_up() function is never called. To fix
this, a call to netif_carrier_off() is added just before phylink_start()
so that we do not introduce a regression in the driver.
Fixes: 4bb0432628 ("net: mvpp2: phylink support")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch mades TI_DAVINCI_CPDMA select GENERIC_ALLOCATOR.
without that, the following sparc64 build failure happen
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_check_free_tx_desc':
(.text+0x278): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_chan_submit':
(.text+0x340): undefined reference to `gen_pool_alloc'
(.text+0x5c4): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `__cpdma_chan_free':
davinci_cpdma.c:(.text+0x64c): undefined reference to `gen_pool_free'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_desc_pool_destroy.isra.6':
davinci_cpdma.c:(.text+0x17ac): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x17b8): undefined reference to `gen_pool_avail'
davinci_cpdma.c:(.text+0x1824): undefined reference to `gen_pool_size'
davinci_cpdma.c:(.text+0x1830): undefined reference to `gen_pool_avail'
drivers/net/ethernet/ti/davinci_cpdma.o: In function `cpdma_ctlr_create':
(.text+0x19f8): undefined reference to `devm_gen_pool_create'
(.text+0x1a90): undefined reference to `gen_pool_add_virt'
Makefile:1011: recipe for target 'vmlinux' failed
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at first mtd_part_of_parse() would just call
of_get_chil_by_name(), it has been patched to deal with sub-partitions
and will now directly manipulate the node returned by mtd_get_of_node()
if the MTD device is a partition.
A of_node_put() was a bit below in the code, to balance the
of_get_child_by_name(). However, despite its name, mtd_get_of_node()
does not take a reference on the OF node. It is a simple helper hiding
some pointer logic to retrieve the OF node related to an MTD
device.
The direct effect of such unbalanced reference counting is visible by
rmmod'ing any module that would have added MTD partitions:
OF: ERROR: Bad of_node_put() on <of_path_to_partition>
As it seems normal to get a reference on the OF node during the
of_property_for_each_string() that follows, add a call to
of_node_get() when relevant.
Fixes: 76a832254a ("mtd: partitions: use DT info for parsing partitions with "compatible" prop")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
When issuing a short read on the ANA log page the number of groups
should not change, even though the final returned data might contain
less groups than that number.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[switched to a for loop]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The documented register to retrieve the fan RPM for fan7 is found
to be unreliable at least with NCT6796D revision 3. Let's use
register 0x4ce instead. This is undocumented for NCT6796D, but
documented for NCT6797D and NCT6798D and known to be working.
Reported-by: Robert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059a4 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After allocating memory object for response buffer, ALSA fireworks
driver has leak of the memory object at error path.
This commit releases the object at the error path.
Fixes: 7d3c1d5901aa('ALSA: fireworks: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After finishing discover of stream formats, ALSA OXFW driver has memory
leak of allocated memory object at error path.
This commit releases the memory object at the error path.
Fixes: 6c29230e2a ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After allocating model-dependent data, ALSA OXFW driver has memory leak
of the data at error path.
This commit releases the data at the error path.
Fixes: 6c29230e2a ('ALSA: oxfw: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After allocating model-dependent data for M-Audio FW1814 and ProjectMix
I/O, ALSA bebob driver has memory leak at error path.
This commit releases the allocated data at the error path.
Fixes: 04a2c73c97eb('ALSA: bebob: delayed registration of sound card')
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
maliciously crafted file systems, and some DAX fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlufGncACgkQ8vlZVpUN
gaPwuQf9FKp9yRvjBkjtnH3+s4Ps8do9r067+90y1k2DJMxKoaBUhGSW2MJJ04j+
5F6Ndp/TZHw+LfPnzsqlrAAoP3CG5+kacfJ7xeVKR0umvACm6rLMsCUct7/rFoSl
PgzCALFIJvQ9+9shuO9qrgmjJrfrlTVUgR9Mu3WUNEvMFbMjk3FMI8gi5kjjWemE
G9TDYH2lMH2sL0cWF51I2gOyNXOXrihxe+vP7j6i/rUkV+YLpKZhE1ss3Sfn6pR2
p/KjnXdupLJpgYLJne9kMrq2r8xYmDfA0S+Dec7nkox5FUOFUHssl3+q8C7cDwO9
zl6VyVFwybjFRJ/Y59wox6eqVPlIWw==
=1P1w
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Ted writes:
Various ext4 bug fixes; primarily making ext4 more robust against
maliciously crafted file systems, and some DAX fixes.
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4, dax: set ext4_dax_aops for dax files
ext4, dax: add ext4_bmap to ext4_dax_aops
ext4: don't mark mmp buffer head dirty
ext4: show test_dummy_encryption mount option in /proc/mounts
ext4: close race between direct IO and ext4_break_layouts()
ext4: fix online resizing for bigalloc file systems with a 1k block size
ext4: fix online resize's handling of a too-small final block group
ext4: recalucate superblock checksum after updating free blocks/inodes
ext4: avoid arithemetic overflow that can trigger a BUG
ext4: avoid divide by zero fault when deleting corrupted inline directories
ext4: check to make sure the rename(2)'s destination is not freed
ext4: add nonstring annotations to ext4.h
This Kselftest fixes update for 4.9-rc5 consists of:
-- fixes to build failures
-- fixes to add missing config files to increase test coverage
-- fixes to cgroup test and a new cgroup test for memory.oom.group
-----BEGIN PGP SIGNATURE-----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=79Fh
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pulled kselftest fixes from Shuah:
"This Kselftest fixes update for 4.9-rc5 consists of:
-- fixes to build failures
-- fixes to add missing config files to increase test coverage
-- fixes to cgroup test and a new cgroup test for memory.oom.group"
Daniel Borkmann says:
====================
pull-request: bpf 2018-09-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix end boundary calculation in BTF for the type section, from Martin.
2) Fix and revert subtraction of pointers that was accidentally allowed
for unprivileged programs, from Alexei.
3) Fix bpf_msg_pull_data() helper by using __GFP_COMP in order to avoid
a warning in linearizing sg pages into a single one for large allocs,
from Tushar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni says:
====================
udp: add missing check on edumx rx path
The early demux RX path for the UDP protocol is currently missing
some checks. Both ipv4 and ipv6 implementations lack checksum conversion
and the ipv6 implementation additionally lack the zero checksum
validation.
The first patch takes care of UDPv4 and the second one of UDPv6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the UDPv6 early demux rx code path lacks some mandatory
checks, already implemented into the normal RX code path - namely
the checksum conversion and no_check6_rx check.
Similar to the previous commit, we move the common processing to
an UDPv6 specific helper and call it from both edemux code path
and normal code path. In respect to the UDPv4, we need to add an
explicit check for non zero csum according to no_check6_rx value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Xin Long <lucien.xin@gmail.com>
Fixes: c9f2c1ae12 ("udp6: fix socket leak on early demux")
Fixes: 2abb7cdc0d ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2abb7cdc0d ("udp: Add support for doing checksum
unnecessary conversion") left out the early demux path for
connected sockets. As a result IP_CMSG_CHECKSUM gives wrong
values for such socket when GRO is not enabled/available.
This change addresses the issue by moving the csum conversion to a
common helper and using such helper in both the default and the
early demux rx path.
Fixes: 2abb7cdc0d ("udp: Add support for doing checksum unnecessary conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or
128 unicast filter entries. (Table 7-8 MAC Address Registers from
databook) Fix dwmac1000_validate_ucast_entries() to accept values
between 1 and 32 in addition.
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Code of Conflict is not achieving its implicit goal of fostering
civility and the spirit of 'be excellent to each other'. Explicit
guidelines have demonstrated success in other projects and other areas
of the kernel.
Here is a Code of Conduct statement for the wider kernel. It is based
on the Contributor Covenant as described at www.contributor-covenant.org
From this point forward, we should abide by these rules in order to help
make the kernel community a welcoming environment to participate in.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Olof Johansson <olof@lxom.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sync syscall to DAX file needs to flush processor cache, but it
currently does not flush to existing DAX files. This is because
'ext4_da_aops' is set to address_space_operations of existing DAX
files, instead of 'ext4_dax_aops', since S_DAX flag is set after
ext4_set_aops() in the open path.
New file
--------
lookup_open
ext4_create
__ext4_new_inode
ext4_set_inode_flags // Set S_DAX flag
ext4_set_aops // Set aops to ext4_dax_aops
Existing file
-------------
lookup_open
ext4_lookup
ext4_iget
ext4_set_aops // Set aops to ext4_da_aops
ext4_set_inode_flags // Set S_DAX flag
Change ext4_iget() to initialize i_flags before ext4_set_aops().
Fixes: 5f0663bb4a ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Ext4 mount path calls .bmap to the journal inode. This currently
works for the DAX mount case because ext4_iget() always set
'ext4_da_aops' to any regular files.
In preparation to fix ext4_iget() to set 'ext4_dax_aops' for ext4
DAX files, add ext4_bmap() to 'ext4_dax_aops', since bmap works for
DAX inodes.
Fixes: 5f0663bb4a ("ext4, dax: introduce ext4_dax_aops")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
fan7 on NCT6796D does not have a fan count register; it only has an RPM
register. Switch to using RPM registers to read the fan speed for all
chips supporting it to solve the problem for good.
Reported-by: Robert Kern <ulteq@web.de>
Cc: Robert Kern <ulteq@web.de>
Fixes: 81820059a4 ("hwmon: (nct6775) Add support for NCT6796D")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Marking mmp bh dirty before writing it will make writeback
pick up mmp block later and submit a write, we don't want the
duplicate write as kmmpd thread should have full control of
reading and writing the mmp block.
Another reason is we will also have random I/O error on
the writeback request when blk integrity is enabled, because
kmmpd could modify the content of the mmp block(e.g. setting
new seq and time) while the mmp block is under I/O requested
by writeback.
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
When in effect, add "test_dummy_encryption" to _ext4_show_options() so
that it is shown in /proc/mounts and other relevant procfs files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull x86 fixes from Ingol Molnar:
"Misc fixes:
- EFI crash fix
- Xen PV fixes
- do not allow PTI on 2-level 32-bit kernels for now
- documentation fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/APM: Fix build warning when PROC_FS is not enabled
Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
x86/xen: Disable CPU0 hotplug for Xen PV
x86/EISA: Don't probe EISA bus for Xen PV guests
x86/doc: Fix Documentation/x86/earlyprintk.txt
Bjørn Mork