32-bit support for NUMA is an oddity on its own but with automatic NUMA
balancing on top there is a reasonable risk that the CPUPID information
cannot be stored in the page flags. This patch removes support for
automatic NUMA support on 32-bit x86.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Description by Jan Kara:
"A lot of older filesystems don't properly flush volatile disk caches
on fsync(2) which can lead to loss of fsynced data after power failure.
This patch makes generic_file_fsync() issue proper cache flush to fix the
problem. Sysadmin can use /sys/devices/.../cache_type to tell the system
it should not send the cache flush."
[akpm@linux-foundation.org: nuke ifdef]
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Function parameters comment fixing.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
v9fs_sysfs_init is only called by __init init_v9fs
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dlm_recovery_ctxt.received is unused.
ocfs2_should_refresh_lock_res() can only return 0 or 1, so the error
handling code in ocfs2_super_lock() is unneeded.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ocfs2 cluster size may be 1MB, which has 20 bits. When resize, the
input new clusters is mostly the number of clusters in a group
descriptor(32256).
Since the input clusters is defined as type int, so it will overflow
when shift left 20 bits and then lead to incorrect global bitmap i_size.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Parameters new_clusters and first_new_cluster are not used in
ocfs2_update_last_group_and_inode, so remove them.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We found a race situation when dlm recovery and node joining occurs
simultaneously if the network state is bad.
N1 N4
start joining dlm and send
query join to all live nodes
set joining node to N1, return OK
send query join to other
live nodes and it may take
a while
call dlm_send_join_assert()
to send assert join message
when N2 is down, so keep
trying to send message to N2
until find N2 is down
send assert join message to
N3, but connection is down
with N3, so it may take a
while
become the recovery master for N2
and send begin reco message to other
nodes in domain map but no N1
connection with N3 is rebuild,
then send assert join to N4
call dlm_assert_joined_handler(),
add N1 to domain_map
dlm recovery done, send finalize message
to nodes in domain map, including N1
receiving finalize message,
trigger the BUG() because
recovery master mismatch.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit 75f82eaa50 ("ocfs2: fix NULL pointer dereference when
dismount and ocfs2rec simultaneously") because it may cause a umount
hang while shutting down the truncate log.
fix NULL pointer dereference when dismount and ocfs2rec simultaneously
The situation is as followes:
ocfs2_dismout_volume
-> ocfs2_recovery_exit
-> free osb->recovery_map
-> ocfs2_truncate_shutdown
-> lock global bitmap inode
-> ocfs2_wait_for_recovery
-> check whether osb->recovery_map->rm_used is zero
Because osb->recovery_map is already freed, rm_used can be any other
values, so it may yield umount hang.
To prevent NULL pointer dereference while getting sys_root_inode, we use
a osb_tl_disable flag to disable schedule osb_truncate_log_wq after
truncate log shutdown.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs_info_foo() and ocfs2_get_request_ptr functions are only used in ioctl.c
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We found there is a conversion deadlock when the owner of lockres
happened to crash before send DLM_PROXY_AST_MSG for a downconverting
lock. The situation is as follows:
Node1 Node2 Node3
the owner of lockresA
lock_1 granted at EX mode
and call ocfs2_cluster_unlock
to decrease ex_holders.
converting lock_3 from
NL to EX
send DLM_PROXY_AST_MSG
to Node1, asking Node 1
to downconvert.
receiving DLM_PROXY_AST_MSG,
thread ocfs2dc send
DLM_CONVERT_LOCK_MSG
to Node2 to downconvert
lock_1(EX->NL).
lock_1 can be granted and
put it into pending_asts
list, return DLM_NORMAL.
then something happened
and Node2 crashed.
received DLM_NORMAL, waiting
for DLM_PROXY_AST_MSG.
selected as the recovery
master, receving migrate
lock from Node1, queue
lock_1 to the tail of
converting list.
After dlm recovery, converting list in the master of lockresA(Node3)
will be: converting list head <-> lock_3(NL->EX) <->lock_1(EX<->NL).
Requested mode of lock_3 is not compatible with the granted mode of
lock_1, so it can not be granted. and lock_1 can not downconvert
because covnerting queue is strictly FIFO. So a deadlock is created.
We think function dlm_process_recovery_data() should queue_ast for
lock_1 or alter the order of lock_1 and lock_3, so dlm_thread can
process lock_1 first. And if there are multiple downconverting locks,
they must convert form PR to NL, so no need to sort them.
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Once JBD2_ABORT is set, ocfs2_commit_cache will fail in
ocfs2_commit_thread. Then it will get into a loop with mass logs. This
will meaninglessly consume a larger number of resource and may lead to
the system hanging. So limit printk in this case.
[akpm@linux-foundation.org: document the msleep]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two standard techniques for dereferencing structures pointed
to by void *: cast to the right type each time they're used, or assign
to local variables of the right type.
But there's no need to do *both*.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace strncpy(size 63) by defined value.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Static values are automatically initialized to NULL.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct conversion of one KERN_DEBUG message without DEBUG definition
(suggested by Josh Triplett)
That message will now be disabled by default. (see
Documentation/CodingStyle Chapter 13)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add pr_fmt based on module name.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix function parameter documentation
EXPORT_SYMBOLS moved after corresponding functions
Small coding style and checkpatch warning fixes
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__uc32_ioremap_pfn_caller() should return NULL when the pfn is found to be
invalid.
From a recommendation by Guan Xuetao.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the last pr_warning callsite in fs branch
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__get_cpu_var() is used for multiple purposes in the kernel source. One
of them is address calculation via the form &__get_cpu_var(x). This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less
registers are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e. using
a global register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Signed-off-by: Christoph Lameter <cl@linux.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only]
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Static values are automatically initialized to NULL.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without this patch fanotify_init does not validate the value passed in
event_f_flags.
When a fanotify event is read from the fanotify file descriptor a new
file descriptor is created where file.f_flags = event_f_flags.
Internal and external open flags are stored together in field f_flags of
struct file. Hence, an application might create file descriptors with
internal flags like FMODE_EXEC, FMODE_NOCMTIME set.
Jan Kara and Eric Paris both aggreed that this is a bug and the value of
event_f_flags should be checked:
https://lkml.org/lkml/2014/4/29/522https://lkml.org/lkml/2014/4/29/539
This updated patch version considers the comments by Michael Kerrisk in
https://lkml.org/lkml/2014/5/4/10
With the patch the value of event_f_flags is checked.
When specifying an invalid value error EINVAL is returned.
Internal flags are disallowed.
File creation flags are disallowed:
O_CREAT, O_DIRECTORY, O_EXCL, O_NOCTTY, O_NOFOLLOW, O_TRUNC, and O_TTY_INIT.
Flags which do not make sense with fanotify are disallowed:
__O_TMPFILE, O_PATH, FASYNC, and O_DIRECT.
This leaves us with the following allowed values:
O_RDONLY, O_WRONLY, O_RDWR are basic functionality. The are stored in the
bits given by O_ACCMODE.
O_APPEND is working as expected. The value might be useful in a logging
application which appends the current status each time the log is opened.
O_LARGEFILE is needed for files exceeding 4GB on 32bit systems.
O_NONBLOCK may be useful when monitoring slow devices like tapes.
O_NDELAY is equal to O_NONBLOCK except for platform parisc.
To avoid code breaking on parisc either both flags should be
allowed or none. The patch allows both.
__O_SYNC and O_DSYNC may be used to avoid data loss on power disruption.
O_NOATIME may be useful to reduce disk activity.
O_CLOEXEC may be useful, if separate processes shall be used to scan files.
Once this patch is accepted, the fanotify_init.2 manpage has to be updated.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If fanotify_mark is called with illegal value of arguments flags and
marks it usually returns EINVAL.
When fanotify_mark is called with FAN_MARK_FLUSH the argument flags is
not checked for irrelevant flags like FAN_MARK_IGNORED_MASK.
The patch removes this inconsistency.
If an irrelevant flag is set error EINVAL is returned.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not initialize private_destroy_list twice. list_replace_init()
already takes care of initializing private_destroy_list. We don't need
to initialize it with LIST_HEAD() beforehand.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before the patch, read creates FAN_ACCESS_PERM and FAN_ACCESS events,
readdir creates only FAN_ACCESS_PERM events.
This is inconsistent.
After the patch, readdir creates FAN_ACCESS_PERM and FAN_ACCESS events.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Originally from Tvrtko Ursulin (https://lkml.org/lkml/2011/1/12/112)
Avoid having to provide a fake/invalid fd and path when flushing marks
Currently for a group to flush marks it has set it needs to provide a
fake or invalid (but resolvable) file descriptor and path when calling
fanotify_mark. This patch pulls the flush handling a bit up so file
descriptor and path are completely ignored when flushing.
I reworked the patch to be applicable again (the signature of
fanotify_mark has changed since Tvrtko's work).
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace seq_printf where possible + coalesce formats from 2 existing
seq_puts
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 786235eeba ("kthread: make kthread_create() killable") meant
for allowing kthread_create() to abort as soon as killed by the
OOM-killer. But returning -ENOMEM is wrong if killed by SIGKILL from
userspace. Change kthread_create() to return -EINTR upon SIGKILL.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs. So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.
Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trinity reports BUG:
sleeping function called from invalid context at kernel/locking/rwsem.c:47
in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27
__might_sleep < down_write < __put_anon_vma < page_get_anon_vma <
migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages ..
Right, since conversion to mutex then rwsem, we should not put_anon_vma()
from inside an rcu_read_lock()ed section: fix the two places that did so.
And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra.
Fixes: 88c22088bf ("mm: optimize page_lock_anon_vma() fast-path")
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Horiguchi-san has done most of the work on hwpoison in the last years
and he also does most of the reviewing. So I'm passing on the hwpoison
maintainership to him.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Might as well be the get_maintainer maintainer...
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently added page-cache dumping is known to be a little bit racy.
But after race with truncate it just dies due to unhandled SIGBUS
when it tries to poke pages beyond the new end of file.
This patch adds handler for SIGBUS which skips the rest of the file.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Another round of clean-up of FDT related code in architecture code.
This removes knowledge of internal FDT details from most architectures
except powerpc.
- Conversion of kernel's custom FDT parsing code to use libfdt.
- DT based initialization for generic serial earlycon. The introduction
of generic serial earlycon support went in thru tty tree.
- Improve the platform device naming for DT probed devices to ensure
unique naming and use parent names instead of a global index.
- Fix a race condition in of_update_property.
- Unify the various linker section OF match tables and fix several
function prototype errors.
- Update platform_get_irq_byname to work in deferred probe cases.
- 2 binding doc updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTjzgyAAoJEMhvYp4jgsXiFsUH/1PMTGo8CyD62VQD5ZKdAoW+
Fq6vCiRQ8assF5i5ZLcW1DqhjtoRaCKYhVbRKa5lj7cZdjlSpacI/qQPrF5Br2Ii
bTE3Ff/AQwipQaz/Bj7HqJCgGwfWK8xdfgW0abKsyXMWDN86Bov/zzeu8apmws0x
H1XjJRgnc/rzM4m9ny6+lss0iq6YL54SuTYNzHR33+Ywxls69SfHXIhCW0KpZcBl
5U3YUOomt40GfO46sxFA4xApAhypEK4oVq7asyiA2ArTZ/c2Pkc9p5CBqzhDLmlq
yioWTwHIISv0q+yMLCuQrVGIsbUDkQyy7RQ15z6U+/e/iGO/M+j3A5yxMc3qOi4=
=Onff
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next
Pull DeviceTree updates from Rob Herring:
- Another round of clean-up of FDT related code in architecture code.
This removes knowledge of internal FDT details from most
architectures except powerpc.
- Conversion of kernel's custom FDT parsing code to use libfdt.
- DT based initialization for generic serial earlycon. The
introduction of generic serial earlycon support went in through the
tty tree.
- Improve the platform device naming for DT probed devices to ensure
unique naming and use parent names instead of a global index.
- Fix a race condition in of_update_property.
- Unify the various linker section OF match tables and fix several
function prototype errors.
- Update platform_get_irq_byname to work in deferred probe cases.
- 2 binding doc updates
* tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits)
of: handle NULL node in next_child iterators
of/irq: provide more wrappers for !CONFIG_OF
devicetree: bindings: Document micrel vendor prefix
dt: bindings: dwc2: fix required value for the phy-names property
of_pci_irq: kill useless variable in of_irq_parse_pci()
of/irq: do irq resolution in platform_get_irq_byname()
of: Add a testcase for of_find_node_by_path()
of: Make of_find_node_by_path() handle /aliases
of: Create unlocked version of for_each_child_of_node()
lib: add glibc style strchrnul() variant
of: Handle memory@0 node on PPC32 only
pci/of: Remove dead code
of: fix race between search and remove in of_update_property()
of: Use NULL for pointers
of: Stop naming platform_device using dcr address
of: Ensure unique names without sacrificing determinism
tty/serial: pl011: add DT based earlycon support
of/fdt: add FDT serial scanning for earlycon
of/fdt: add FDT address translation support
serial: earlycon: add DT support
...
At this time, majority of changes come from ASoC world while we got a
few new drivers in other places for FireWire and USB. There have been
lots of ASoC core cleanups / refactoring, but very little visible to
external users.
ASoC
- Support for specifying aux CODECs in DT
- Removal of the deprecated mux and enum macros
- More moves towards full componentisation
- Removal of some unused I/O code
- Lots of cleanups, fixes and enhancements to the davinci, Freescale,
Haswell and Realtek drivers
- Several drivers exposed directly in Kconfig for use with simple-card
- GPIO descriptor support for jacks
- More updates and fixes to the Freescale SSI, Intel and rsnd drivers
- New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781,
and Realtek RT5677
HD-audio:
- Clean up Dell headset quirks
- Noise fixes for Dell and Sony laptops
- Thinkpad T440 dock fix
- Realtek codec updates (ALC293,ALC233,ALC3235)
- Tegra HD-audio HDMI support
FireWire-audio:
- FireWire audio stack enhancement (AMDTP, MIDI), support for incoming
isochronous stream and duplex streams with timestamp synchronization
- BeBoB-based devices support
- Fireworks-based device support
USB-audio:
- Behringer BCD2000 USB device support
Misc:
- Clean up of a few old drivers, atmel, fm801, etc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=nxFA
-----END PGP SIGNATURE-----
Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next
Pull sound updates from Takashi Iwai:
"At this time, majority of changes come from ASoC world while we got a
few new drivers in other places for FireWire and USB. There have been
lots of ASoC core cleanups / refactoring, but very little visible to
external users.
ASoC:
- Support for specifying aux CODECs in DT
- Removal of the deprecated mux and enum macros
- More moves towards full componentisation
- Removal of some unused I/O code
- Lots of cleanups, fixes and enhancements to the davinci, Freescale,
Haswell and Realtek drivers
- Several drivers exposed directly in Kconfig for use with
simple-card
- GPIO descriptor support for jacks
- More updates and fixes to the Freescale SSI, Intel and rsnd drivers
- New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
ADAU1781, and Realtek RT5677
HD-audio:
- Clean up Dell headset quirks
- Noise fixes for Dell and Sony laptops
- Thinkpad T440 dock fix
- Realtek codec updates (ALC293,ALC233,ALC3235)
- Tegra HD-audio HDMI support
FireWire-audio:
- FireWire audio stack enhancement (AMDTP, MIDI), support for
incoming isochronous stream and duplex streams with timestamp
synchronization
- BeBoB-based devices support
- Fireworks-based device support
USB-audio:
- Behringer BCD2000 USB device support
Misc:
- Clean up of a few old drivers, atmel, fm801, etc"
* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
ASoC: Fix wrong argument for card remove callbacks
ASoC: free jack GPIOs before the sound card is freed
ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
ASoC: cache: Fix error code when not using ASoC level cache
ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
ASoC: add RT5677 CODEC driver
ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
ASoC: Add helper functions to cast from DAPM context to CODEC/platform
ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
ASoC: wm9713: correct mono out PGA sources
ALSA: synth: emux: soundfont.c: Cleaning up memory leak
ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
ASoC: fsl-ssi: Use regmap
ASoC: fsl-ssi: reorder and document fsl_ssi_private
...
* DT support for the panel drivers that were still missing it
* TI AM43xx support
* TI OMAP5 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QKsH
-----END PGP SIGNATURE-----
Merge tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next
Pull omap fbdev changes from Tomi Valkeinen:
- DT support for the panel drivers that were still missing it
- TI AM43xx support
- TI OMAP5 support
* tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits)
OMAPDSS: move 'compatible' converter to omapdss driver
OMAPDSS: HDMI: fix devm_ioremap_resource error checks
OMAPDSS: HDMI: remove unused defines
OMAPDSS: HDMI: cleanup WP ioremaps
OMAPDSS: panel NEC-NL8048HL11 DT support
Doc/DT: Add DT binding documentation for TPO td043mtea1 panel
OMAPDSS: Panel TPO-TD043MTEA1 DT support
Doc/DT: Add DT binding documentation for SHARP LS037V7DW01
OMAPDSS: panel sharp-ls037v7dw01 DT support
OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
Doc/DT: Add binding doc for lgphilips,lb035q02.txt
OMAPDSS: panel-lgphilips-lb035q02: Add DT support
OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
OMAPDSS: panel-dpi: enable-gpio
OMAPDSS: Fix writes to DISPC_POL_FREQ
Doc/DT: Add OMAP5 DSS DT bindings
OMAPDSS: HDMI: cleanup ioremaps
OMAPDSS: HDMI: Add OMAP5 HDMI support
OMAPDSS: HDMI: PLL changes for OMAP5
...
Mainly fixes and small improvements. The biggest change seems to be backlight
control support for mx3fb.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJTju0rAAoJEPo9qoy8lh71hsEP/03g4O1AmV0j+dDhemaQXZTg
OVTMPhjWF77RRApp/aneX48/+F1qaQyVbdyBWrlVFlRhPOCvkDC/JCU2PhqI9399
wRVOeL01q2IJHzh3S7jvQqF79WejO3VOfK/LbkztVnJMVHw8h5uaGEqHrOu4IpdU
tsLeSrNPsfJd0e1bmTAXOWft+I5hekRmLqbWbGzV6l1TElLo0tJjN3sbUUe7wTQF
gsS3svnH8LAS0njpcuskWRNz9XpMkIJl/CGaB5kRqvswPbeFPgzwHXsH4N7LFNFm
xyw/xgRTOWGhbKAdzylp1Ko15S36iVTuWzwi0KJ4CNd6f1LXlPvznR6a+m722C1K
GuCIbLH6vqNW/EAxmpMYyvMlEYIrgu4fuFh0+V6dEv3zPFY/1XWjx3Un7mhfryXi
zmDeZfMpkDyTMHlzGpuCaC5jp92LqEN+Ys1AWGJFwpUSMQcP3GoyPh4tLnC2C+/t
hf9TCQ4V2C7ongLIImiI2plhgAE173L2ZkIJjgcVYOO/DP+Eq7fI0dTFy6E49Mwk
Zwc7MlYg50/eoRkaZ7gLvaVuzoPr+EoMdKXI/p+5/4rIpomZQ9Ndu2hswvzjd9WY
Hf0fT6NJQ+wLPl3MtACwsdxSnq0ige1sv5awVUAWvP436mFExtbuXnM/B1NnwECI
TcRqEYMINo3u8cbhHUVW
=Gfjc
-----END PGP SIGNATURE-----
Merge tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next
Pull main fbdev changes from Tomi Valkeinen:
"Mainly fixes and small improvements. The biggest change seems to be
backlight control support for mx3fb"
* tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (31 commits)
drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap
video: fbdev: s3fb.c: Fix for possible null pointer dereference
video: fbdev: grvga.c: Fix for possible null pointer dereference
matroxfb: perform a dummy read of M_STATUS
video: of: display_timing: fix default native-mode setting
video: delete unneeded call to platform_get_drvdata
video: mx3fb: Add backlight control support
video: omap: delete support for early fbmem allocation
video: of: display_timing: remove two unsafe error messages
fbdev: fbmem: remove positive test on unsigned values
fbcon: Fix memory leak in con2fb_release_oldinfo()
video: Kconfig: Add a dependency to the Goldfish framebuffer driver
video: exynos: Add a dependency to the menu
video: mx3fb: Use devm_kzalloc
video/nuc900: allow modular build
video: atmel needs FB_BACKLIGHT
video: export fb_prepare_logo
video/mbx: fix building debugfs support
video/omap: fix modular build
video: clarify I2C dependencies
...
- ACPICA update to upstream version 20140424. That includes a
number of fixes and improvements related to things like GPE
handling, table loading, headers, memory mapping and unmapping,
DSDT/SSDT overriding, and the Unload() operator. The acpidump
utility from upstream ACPICA is included too. From Bob Moore,
Lv Zheng, David Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices
rather than PNP devices for ACPI device objects with _HID by
default. PNP devices will still be created for the ACPI device
object with device IDs corresponding to real PNP devices, so
that change should not break things left and right, and we're
expecting to see more and more ACPI-enumerated platform devices
in the future. From Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
it to handle system suspend/resume on Asus T100 correctly.
From Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions
if certain additional conditions related to coordination within
device hierarchy are met. Related PM documentation update and
ACPI PM domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling,
Tony Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from
Chander Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie,
Doug Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from
Jacob Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way
from Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tpdF
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next
Pull ACPI and power management updates from Rafael Wysocki:
"ACPICA is the leader this time (63 commits), followed by cpufreq (28
commits), devfreq (15 commits), system suspend/hibernation (12
commits), ACPI video and ACPI device enumeration (10 commits each).
We have no major new features this time, but there are a few
significant changes of how things work. The most visible one will
probably be that we are now going to create platform devices rather
than PNP devices by default for ACPI device objects with _HID. That
was long overdue and will be really necessary to be able to use the
same drivers for the same hardware blocks on ACPI and DT-based systems
going forward. We're not expecting fallout from this one (as usual),
but it's something to watch nevertheless.
The second change having a chance to be visible is that ACPI video
will now default to using native backlight rather than the ACPI
backlight interface which should generally help systems with broken
Win8 BIOSes. We're hoping that all problems with the native backlight
handling that we had previously have been addressed and we are in a
good enough shape to flip the default, but this change should be easy
enough to revert if need be.
In addition to that, the system suspend core has a new mechanism to
allow runtime-suspended devices to stay suspended throughout system
suspend/resume transitions if some extra conditions are met
(generally, they are related to coordination within device hierarchy).
However, enabling this feature requires cooperation from the bus type
layer and for now it has only been implemented for the ACPI PM domain
(used by ACPI-enumerated platform devices mostly today).
Also, the acpidump utility that was previously shipped as a separate
tool will now be provided by the upstream ACPICA along with the rest
of ACPICA code, which will allow it to be more up to date and better
supported, and we have one new cpuidle driver (ARM clps711x).
The rest is improvements related to certain specific use cases,
cleanups and fixes all over the place.
Specifics:
- ACPICA update to upstream version 20140424. That includes a number
of fixes and improvements related to things like GPE handling,
table loading, headers, memory mapping and unmapping, DSDT/SSDT
overriding, and the Unload() operator. The acpidump utility from
upstream ACPICA is included too. From Bob Moore, Lv Zheng, David
Box, David Binderman, and Colin Ian King.
- Fixes and cleanups related to ACPI video and backlight interfaces
from Hans de Goede. That includes blacklist entries for some new
machines and using native backlight by default.
- ACPI device enumeration changes to create platform devices rather
than PNP devices for ACPI device objects with _HID by default. PNP
devices will still be created for the ACPI device object with
device IDs corresponding to real PNP devices, so that change should
not break things left and right, and we're expecting to see more
and more ACPI-enumerated platform devices in the future. From
Zhang Rui and Rafael J Wysocki.
- Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
to handle system suspend/resume on Asus T100 correctly. From
Heikki Krogerus and Rafael J Wysocki.
- PM core update introducing a mechanism to allow runtime-suspended
devices to stay suspended over system suspend/resume transitions if
certain additional conditions related to coordination within device
hierarchy are met. Related PM documentation update and ACPI PM
domain support for the new feature. From Rafael J Wysocki.
- Fixes and improvements related to the "freeze" sleep state. They
affect several places including cpuidle, PM core, ACPI core, and
the ACPI battery driver. From Rafael J Wysocki and Zhang Rui.
- Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
- Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
Camuso, and Toshi Kani.
- System suspend/resume optimization in the ACPI battery driver from
Lan Tianyu.
- OPP (Operating Performance Points) subsystem updates from Chander
Kashyap, Mark Brown, and Nishanth Menon.
- cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
Stratos Karafotis, and Viresh Kumar.
- Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
Viresh Kumar.
- intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
Smythies, and Stratos Karafotis.
- Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
- Fix for the cpuidle menu governor from Chander Kashyap.
- New ARM clps711x cpuidle driver from Alexander Shiyan.
- Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
Fabian Frederick, Pali Rohár, and Sebastian Capella.
- Intel RAPL (Running Average Power Limit) driver updates from Jacob
Pan.
- PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
- devfreq core updates from Chanwoo Choi and Paul Bolle.
- devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
Bartlomiej Zolnierkiewicz.
- turbostat tool fix from Jean Delvare.
- cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
and Thomas Renninger.
- New ACPI ec_access.c tool for poking at the EC in a safe way from
Thomas Renninger"
* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
ACPICA: Namespace: Remove _PRP method support.
intel_pstate: Improve initial busy calculation
intel_pstate: add sample time scaling
intel_pstate: Correct rounding in busy calculation
intel_pstate: Remove C0 tracking
PM / hibernate: fixed typo in comment
ACPI: Fix x86 regression related to early mapping size limitation
ACPICA: Tables: Add mechanism to control early table checksum verification.
ACPI / scan: use platform bus type by default for _HID enumeration
ACPI / scan: always register ACPI LPSS scan handler
ACPI / scan: always register memory hotplug scan handler
ACPI / scan: always register container scan handler
ACPI / scan: Change the meaning of missing .attach() in scan handlers
ACPI / scan: introduce platform_id device PNP type flag
ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
ACPI / PNP: use device ID list for PNPACPI device enumeration
ACPI / scan: .match() callback for ACPI scan handlers
ACPI / battery: wakeup the system only when necessary
power_supply: allow power supply devices registered w/o wakeup source
...
Pull HID patches from Jiri Kosina:
- RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew
Duggan and Jiri Kosina
- cleanup of hid-sony driver and improved support for Sixaxis and
Dualshock 4, by Frank Praznik
- other usual small fixes and support for new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
HID: thingm: thingm_fwinfo[] doesn't need to be global
HID: core: add two new usages for digitizer
HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
HID: hid-sensor-hub: Set report quirk for Microsoft Surface
HID: debug: add labels for HID Sensor Usages
HID: uhid: Use kmemdup instead of kmalloc + memcpy
HID: rmi: do not handle touchscreens through hid-rmi
HID: quirk for Saitek RAT7 and MMO7 mices' mode button
HID: core: fix validation of report id 0
HID: rmi: fix masks for x and w_x data
HID: rmi: fix wrong struct field name
HID: rmi: do not fetch more than 16 bytes in a query
HID: rmi: check for the existence of some optional queries before reading query 12
HID: i2c-hid: hid report descriptor retrieval changes
HID: add missing hid usages
HID: hid-sony - allow 3rd party INTEC controller to turn off all leds
HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs
HID: sony: Initialize the controller LEDs with a device ID value
HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string
...
Pull trivial tree changes from Jiri Kosina:
"Usual pile of patches from trivial tree that make the world go round"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
staging: go7007: remove reference to CONFIG_KMOD
aic7xxx: Remove obsolete preprocessor define
of: dma: doc fixes
doc: fix incorrect formula to calculate CommitLimit value
doc: Note need of bc in the kernel build from 3.10 onwards
mm: Fix printk typo in dmapool.c
modpost: Fix comment typo "Modules.symvers"
Kconfig.debug: Grammar s/addition/additional/
wimax: Spelling s/than/that/, wording s/destinatary/recipient/
aic7xxx: Spelling s/termnation/termination/
arm64: mm: Remove superfluous "the" in comment
of: Spelling s/anonymouns/anonymous/
dma: imx-sdma: Spelling s/determnine/determine/
ath10k: Improve grammar in comments
ath6kl: Spelling s/determnine/determine/
of: Improve grammar for of_alias_get_id() documentation
drm/exynos: Spelling s/contro/control/
radio-bcm2048.c: fix wrong overflow check
doc: printk-formats: do not mention casts for u64/s64
doc: spelling error changes
...
was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration,
GDB support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace interface
and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still,
we have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=j5Od
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next
Pull KVM updates from Paolo Bonzini:
"At over 200 commits, covering almost all supported architectures, this
was a pretty active cycle for KVM. Changes include:
- a lot of s390 changes: optimizations, support for migration, GDB
support and more
- ARM changes are pretty small: support for the PSCI 0.2 hypercall
interface on both the guest and the host (the latter acked by
Catalin)
- initial POWER8 and little-endian host support
- support for running u-boot on embedded POWER targets
- pretty large changes to MIPS too, completing the userspace
interface and improving the handling of virtualized timer hardware
- for x86, a larger set of changes is scheduled for 3.17. Still, we
have a few emulator bugfixes and support for running nested
fully-virtualized Xen guests (para-virtualized Xen guests have
always worked). And some optimizations too.
The only missing architecture here is ia64. It's not a coincidence
that support for KVM on ia64 is scheduled for removal in 3.17"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
KVM: add missing cleanup_srcu_struct
KVM: PPC: Book3S PR: Rework SLB switching code
KVM: PPC: Book3S PR: Use SLB entry 0
KVM: PPC: Book3S HV: Fix machine check delivery to guest
KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
KVM: PPC: Book3S HV: Fix dirty map for hugepages
KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
KVM: PPC: Book3S: Add ONE_REG register names that were missed
KVM: PPC: Add CAP to indicate hcall fixes
KVM: PPC: MPIC: Reset IRQ source private members
KVM: PPC: Graciously fail broken LE hypercalls
PPC: ePAPR: Fix hypercall on LE guest
KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
KVM: PPC: BOOK3S: Always use the saved DAR value
PPC: KVM: Make NX bit available with magic page
KVM: PPC: Disable NX for old magic page using guests
KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
...
It is probably also the first one without a single patch from me. That
is down to a combination of factors, and I have some things in the works
that are not quite ready yet, that I hope to put in next time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a
rare recovery race condition). The final patch, from Ben Marzinski,
is an important change in the freeze code which has been in
progress for some time. This removes the need to take and drop the
transaction lock for every single transaction, when the only time it
was used, was at file system freeze time. Ben's patch integrates the
freeze operation into the journal flush code as an alternative with
lower overheads and also lands up resolving some difficult to fix races
at the same time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=x9iK
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next
Pull gfs2 updates from Steven Whitehouse:
"This must be about the smallest merge window patch set ever for GFS2.
It is probably also the first one without a single patch from me.
That is down to a combination of factors, and I have some things in
the works that are not quite ready yet, that I hope to put in next
time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a rare
recovery race condition). The final patch, from Ben Marzinski, is an
important change in the freeze code which has been in progress for
some time. This removes the need to take and drop the transaction
lock for every single transaction, when the only time it was used, was
at file system freeze time. Ben's patch integrates the freeze
operation into the journal flush code as an alternative with lower
overheads and also lands up resolving some difficult to fix races at
the same time"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Prevent recovery before the local journal is set
GFS2: fs/gfs2/file.c: kernel-doc warning fixes
GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
GFS2: remove transaction glock
GFS2: lops.c: replace 0 by NULL for pointers
GFS2: quotas not being refreshed in gfs2_adjust_quota
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lgS1
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.16' of git://git.samba.org/jlayton/linux into next
Pull file locking changes from Jeff Layton:
"Pretty quiet on the file-locking related front this cycle. Just some
small cleanups and the addition of some tracepoints in the lease
handling code"
* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
locks: add some tracepoints in the lease handling code
fs/locks.c: replace seq_printf by seq_puts
locks: ensure that fl_owner is always initialized properly in flock and lease codepaths
Mel Gorman