Commit Graph

20 Commits

Author SHA1 Message Date
matt mooney dea2aff876 m68knommu: change to new flag variables
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-21 10:17:31 +10:00
Steven King 91d6041721 m68knommu: Coldfire QSPI platform support
Since Grant has added the coldfire-qspi driver to next-spi, here is the
platform support for the parts that have qspi hardware.  This sets up
gpio to do the spi chip select using the default chip select pins; it should
be trivial for boards that require different or additional spi chip selects to
use other gpios as needed.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-17 11:04:19 +10:00
Greg Ungerer f6a66276f5 m68knommu: clean up ColdFire 532x CPU timer setup
The newer ColdFire 532x family of CPU's uses the old timer, but has a
newer interrupt controller. It doesn't need the special timer setup
that was required when using the older interrupt controller. Remove the
dead timer irq and level setting code, and define the hard coded vector.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16 09:43:52 +10:00
Greg Ungerer 91b1b94f88 m68knommu: remove timer device interrupt setup for ColdFire 532x
With fully implemented interrupt controller code we don't need to do
the custom interrupt setup for the timer device of the ColdFire 532x.
Remove that code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16 09:43:48 +10:00
Greg Ungerer 6589c1d715 m68knommu: clean up ColdFire 532x interrupt setup
With the common intc-simr interrupt controller code in place the ColdFire
532x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-16 09:43:43 +10:00
sfking@fdwdc.com 7846fe800a generic GPIO support for the Freescale Coldfire 532x.
Add support for the 532x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-10 12:01:23 +10:00
Greg Ungerer 384feb9131 m68knommu: add CPU reset code for the 532x ColdFire
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11 13:09:10 +10:00
Greg Ungerer ffba3f48bc fec: add FEC platform support to ColdFire CPU's setup code
m68knommu: add FEC platform support to ColdFire CPU's setup code

Move the per-CPU FEC driver setup code into the actual platform
setup code for each ColdFire CPU varient.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 22:40:38 -08:00
Matt Waddel add8240eed m68knommu: fix 5329 ColdFire periphal addressing
The 5329 ColdFire peripheral IO register addresses are not relative to
the MBAR register. So fix the serial platform setup array and IRQ acking
to use just the direct addresses.

Signed-off-by: Matt Waddel <Matt.Waddel@freescale.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-27 16:42:03 +10:00
Greg Ungerer c25f0a0f7f m68knommu: use asflags instead of EXTRA_AFLAGS
Modify the extra asm flags for debugger capabilities, use asflags instead for
EXTRA_AFLAGS.  Suggestion from Sam Ravnborg.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 20:58:05 -08:00
Greg Ungerer 0c6377f878 m68knommu: remove dead timer int pending code
Remove all the dead timer interrupt checking functions for the ColdFire
CPU "timers" hardware that are not used after switching to GENERIC_TIME.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 21:02:04 +11:00
Greg Ungerer b2e1810e64 m68knommu: platform setup for 532x ColdFire parts
Switch to platform style configuration for 532x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 20:55:43 +11:00
Greg Ungerer 2f2c267989 m68knommu: cleanup m68knommu timer code
Reduce the function pointer mess of the m68knommu timer code by calling
directly to the local hardware's timer setup, and expose the local
common timer interrupt handler to the lower level hardware timer.

Ultimately this will save definitions of all these functions across all
the platform code to setup the function pointers (which for any given
m68knommu CPU family member can be only one set of hardware timer
functions).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 08:32:35 -07:00
Sam Ravnborg 714055ede4 kbuild: fix AFLAGS use in h8300 and m68knommu
In most cases when AFALGS is manipuled direct this is a bug
and EXTRA_AFLAGS should have been used.
Fix the obvious candidates.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
2007-10-15 21:03:59 +02:00
Greg Ungerer 374c3f552d m68knommu: remove use of colfire_trap_init
The switch to using the generic irq framework removed the
coldfire_trap_init() code, so remove all references to it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:05:20 -07:00
Greg Ungerer bc72450aeb m68knommu: make BOOTPARAM setup common
Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 11:05:01 -07:00
Greg Ungerer eaefd5fb7d [PATCH] m68knommu: use irq_handler_t for passing handler types
Use irq_handler_t for passing clock handler routine around.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 10:45:33 -08:00
Dave Jones 038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Greg Ungerer 5503967307 [PATCH] m68knommu: ColdFire 532x CPU platform build support
Add build support for the new Freescale 532x CPU platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 17:51:39 -07:00
Greg Ungerer 3196cf83ad [PATCH] m68knommu: ColdFire 532x CPU startup code
Add kernel startup code for the new Freescale 532x CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 17:43:33 -07:00