Pull aio updates from Al Viro:
"Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly.
The only thing I'm holding back for a day or so is Adam's aio ioprio -
his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case),
but let it sit in -next for decency sake..."
* 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
aio: sanitize the limit checking in io_submit(2)
aio: fold do_io_submit() into callers
aio: shift copyin of iocb into io_submit_one()
aio_read_events_ring(): make a bit more readable
aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way
aio: take list removal to (some) callers of aio_complete()
aio: add missing break for the IOCB_CMD_FDSYNC case
random: convert to ->poll_mask
timerfd: convert to ->poll_mask
eventfd: switch to ->poll_mask
pipe: convert to ->poll_mask
crypto: af_alg: convert to ->poll_mask
net/rxrpc: convert to ->poll_mask
net/iucv: convert to ->poll_mask
net/phonet: convert to ->poll_mask
net/nfc: convert to ->poll_mask
net/caif: convert to ->poll_mask
net/bluetooth: convert to ->poll_mask
net/sctp: convert to ->poll_mask
net/tipc: convert to ->poll_mask
...
Bisection by Amadeusz Sławiński implicates this commit leading to bad
page state issues after VM shutdown, likely due to unbalanced page
references. The original commit was intended only as a performance
improvement, therefore revert for offline rework.
Link: https://lkml.org/lkml/2018/6/2/97
Fixes: 356e88ebe4 ("vfio/type1: Improve memory pinning process for raw PFN mapping")
Cc: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
These abstract out calls to the poll method in preparation for changes
in how we poll.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
The ioeventfd here is actually irqfd handling of an ioeventfd such as
supported in KVM. A user is able to pre-program a device write to
occur when the eventfd triggers. This is yet another instance of
eventfd-irqfd triggering between KVM and vfio. The impetus for this
is high frequency writes to pages which are virtualized in QEMU.
Enabling this near-direct write path for selected registers within
the virtualized page can improve performance and reduce overhead.
Specifically this is initially targeted at NVIDIA graphics cards where
the driver issues a write to an MMIO register within a virtualized
region in order to allow the MSI interrupt to re-trigger.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The iowriteXX/ioreadXX functions assume little endian hardware and
convert to little endian on a write and from little endian on a read.
We currently do our own explicit conversion to negate this. Instead,
add some endian dependent defines to avoid all byte swaps. There
should be no functional change other than big endian systems aren't
penalized with wasted swaps.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This creates a common helper that we'll use for ioeventfd setup.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When using vfio to pass through a PCIe device (e.g. a GPU card) that
has a huge BAR (e.g. 16GB), a lot of cycles are wasted on memory
pinning because PFNs of PCI BAR are not backed by struct page, and
the corresponding VMA has flag VM_PFNMAP.
With this change, when pinning a region which is a raw PFN mapping,
it can skip unnecessary user memory pinning process, and thus, can
significantly improve VM's boot up time when passing through devices
via VFIO. In my test on a Xeon E5 2.6GHz, the time mapping a 16GB
BAR was reduced from about 0.4s to 1.5us.
Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This reverts commit 2170dd0431
The intent of commit 2170dd0431 ("vfio-pci: Mask INTx if a device is
not capabable of enabling it") was to disallow the user from seeing
that the device supports INTx if the platform is incapable of enabling
it. The detection of this case however incorrectly includes devices
which natively do not support INTx, such as SR-IOV VFs, and further
discussions reveal gaps even for the target use case.
Reported-by: Arjun Vynipadath <arjun@chelsio.com>
Fixes: 2170dd0431 ("vfio-pci: Mask INTx if a device is not capabable of enabling it")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO IOMMU type1 currently upmaps IOVA pages synchronously, which requires
IOTLB flushing for every unmapping. This results in large IOTLB flushing
overhead when handling pass-through devices has a large number of mapped
IOVAs. This can be avoided by using the new IOTLB flushing interface.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
[aw - use LIST_HEAD]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Filesystem-DAX is incompatible with 'longterm' page pinning. Without
page cache indirection a DAX mapping maps filesystem blocks directly.
This means that the filesystem must not modify a file's block map while
any page in a mapping is pinned. In order to prevent the situation of
userspace holding of filesystem operations indefinitely, disallow
'longterm' Filesystem-DAX mappings.
RDMA has the same conflict and the plan there is to add a 'with lease'
mechanism to allow the kernel to notify userspace that the mapping is
being torn down for block-map maintenance. Perhaps something similar can
be put in place for vfio.
Note that xfs and ext4 still report:
"DAX enabled. Warning: EXPERIMENTAL, use at your own risk"
...at mount time, and resolving the dax-dma-vs-truncate problem is one
of the last hurdles to remove that designation.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org>
Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Tested-by: Haozhong Zhang <haozhong.zhang@intel.com>
Fixes: d475c6346a ("dax,ext2: replace XIP read and write with DAX I/O")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=Ww3n
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Mask INTx from user if pdev->irq is zero (Alexey Kardashevskiy)
- Capability helper cleanup (Alex Williamson)
- Allow mmaps overlapping MSI-X vector table with region capability
exposing this feature (Alexey Kardashevskiy)
- mdev static cleanups (Xiongwei Song)
* tag 'vfio-v4.16-rc1' of git://github.com/awilliam/linux-vfio:
vfio: mdev: make a couple of functions and structure vfio_mdev_driver static
vfio-pci: Allow mapping MSIX BAR
vfio: Simplify capability helper
vfio-pci: Mask INTx if a device is not capabable of enabling it
The functions vfio_mdev_probe, vfio_mdev_remove and the structure
vfio_mdev_driver are only used in this file, so make them static.
Clean up sparse warnings:
drivers/vfio/mdev/vfio_mdev.c:114:5: warning: no previous prototype
for 'vfio_mdev_probe' [-Wmissing-prototypes]
drivers/vfio/mdev/vfio_mdev.c:121:6: warning: no previous prototype
for 'vfio_mdev_remove' [-Wmissing-prototypes]
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Reviewed-by: Quan Xu <quan.xu0@gmail.com>
Reviewed-by: Liu, Yi L <yi.l.liu@intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
By default VFIO disables mapping of MSIX BAR to the userspace as
the userspace may program it in a way allowing spurious interrupts;
instead the userspace uses the VFIO_DEVICE_SET_IRQS ioctl.
In order to eliminate guessing from the userspace about what is
mmapable, VFIO also advertises a sparse list of regions allowed to mmap.
This works fine as long as the system page size equals to the MSIX
alignment requirement which is 4KB. However with a bigger page size
the existing code prohibits mapping non-MSIX parts of a page with MSIX
structures so these parts have to be emulated via slow reads/writes on
a VFIO device fd. If these emulated bits are accessed often, this has
serious impact on performance.
This allows mmap of the entire BAR containing MSIX vector table.
This removes the sparse capability for PCI devices as it becomes useless.
As the userspace needs to know for sure whether mmapping of the MSIX
vector containing data can succeed, this adds a new capability -
VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - which explicitly tells the userspace
that the entire BAR can be mmapped.
This does not touch the MSIX mangling in the BAR read/write handlers as
we are doing this just to enable direct access to non MSIX registers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw - fixup whitespace, trim function name]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_info_add_capability() helper requires the caller to pass a
capability ID, which it then uses to fill in header fields, assuming
hard coded versions. This makes for an awkward and rigid interface.
The only thing we want this helper to do is allocate sufficient
space in the caps buffer and chain this capability into the list.
Reduce it to that simple task.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
At the moment VFIO rightfully assumes that INTx is supported if
the interrupt pin is not set to zero in the device config space.
However if that is not the case (the pin is not zero but pdev->irq is),
vfio_intx_enable() fails.
In order to prevent the userspace from trying to enable INTx when we know
that it cannot work, let's mask the PCI_INTERRUPT_PIN register.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
__poll_t is also used as wait key in some waitqueues.
Verify that wait_..._poll() gets __poll_t as key and
provide a helper for wakeup functions to get back to
that __poll_t value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds Broadcom FlexRM low-level reset for
VFIO platform.
It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring
The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Oza Oza <oza.oza@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
I get a static checker warning about the potential integer overflow if
we add "unmap->iova + unmap->size". The integer overflow isn't really
harmful, but we may as well fix it. Also unmap->size gets truncated to
size_t when we pass it to vfio_find_dma() so we could check for too high
values of that as well.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Clearing very big IOMMU tables can trigger soft lockups. This adds
cond_resched() to allow the scheduler to do context switching when
it decides to.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
MRRS defines the maximum read request size a device is allowed to
make. Drivers will often increase this to allow more data transfer
with a single request. Completions to this request are bound by the
MPS setting for the bus. Aside from device quirks (none known), it
doesn't seem to make sense to set an MRRS value less than MPS, yet
this is a likely scenario given that user drivers do not have a
system-wide view of the PCI topology. Virtualize MRRS such that the
user can set MRRS >= MPS, but use MPS as the floor value that we'll
write to hardware.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With virtual PCI-Express chipsets, we now see userspace/guest drivers
trying to match the physical MPS setting to a virtual downstream port.
Of course a lone physical device surrounded by virtual interconnects
cannot make a correct decision for a proper MPS setting. Instead,
let's virtualize the MPS control register so that writes through to
hardware are disallowed. Userspace drivers like QEMU assume they can
write anything to the device and we'll filter out anything dangerous.
Since mismatched MPS can lead to AER and other faults, let's add it
to the kernel side rather than relying on userspace virtualization to
handle it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When the user unbinds the last device of a group from a vfio bus
driver, the devices within that group should be available for other
purposes. We currently have a race that makes this generally, but
not always true. The device can be unbound from the vfio bus driver,
but remaining IOMMU context of the group attached to the container
can result in errors as the next driver configures DMA for the device.
Wait for the group to be detached from the IOMMU backend before
allowing the bus driver remove callback to complete.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In vfio_iommu_group_get() we want to increase the reference
count of the iommu group.
In noiommu case, the group does not exist and is allocated.
iommu_group_add_device() increases the group ref count. However we
then call iommu_group_put() which decrements it.
This leads to a "refcount_t: underflow WARN_ON".
Only decrement the ref count in case of iommu_group_add_device
failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the IOMMU driver advertises 'real' reserved regions for MSIs, but
still includes the software-managed region as well, we are currently
blind to the former and will configure the IOMMU domain to map MSIs into
the latter, which is unlikely to work as expected.
Since it would take a ridiculous hardware topology for both regions to
be valid (which would be rather difficult to support in general), we
should be safe to assume that the presence of any hardware regions makes
the software region irrelevant. However, the IOMMU driver might still
advertise the software region by default, particularly if the hardware
regions are filled in elsewhere by generic code, so it might not be fair
for VFIO to be super-strict about not mixing them. To that end, make
vfio_iommu_has_sw_msi() robust against the presence of both region types
at once, so that we end up doing what is almost certainly right, rather
than what is almost certainly wrong.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For ARM-based systems with a GICv3 ITS to provide interrupt isolation,
but hardware limitations which are worked around by having MSIs bypass
SMMU translation (e.g. HiSilicon Hip06/Hip07), VFIO neglects to check
for the IRQ_DOMAIN_FLAG_MSI_REMAP capability, (and thus erroneously
demands unsafe_interrupts) if a software-managed MSI region is absent.
Fix this by always checking for isolation capability at both the IRQ
domain and IOMMU domain levels, rather than predicating that on whether
MSIs require an IOMMU mapping (which was always slightly tenuous logic).
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Root complex integrated endpoints do not have a link and therefore may
use a smaller PCIe capability in config space than we expect when
building our config map. Add a case for these to avoid reporting an
erroneous overlap.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Device lock bites again; if a device .remove() callback races a user
calling ioctl(VFIO_GROUP_GET_DEVICE_FD), the unbind request will hold
the device lock, but the user ioctl may have already taken a vfio_device
reference. In the case of a PCI device, the initial open will attempt
to reset the device, which again attempts to get the device lock,
resulting in deadlock. Use the trylock PCI reset interface and return
error on the open path if reset fails due to lock contention.
Link: https://lkml.org/lkml/2017/7/25/381
Reported-by: Wen Congyang <wencongyang2@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Include Intel XXV710 in INTx workaround (Alex Williamson)
- Make use of ERR_CAST() for error return (Dan Carpenter)
- Fix vfio_group release deadlock from iommu notifier (Alex Williamson)
- Unset KVM-VFIO attributes only on group match (Alex Williamson)
- Fix release path group/file matching with KVM-VFIO (Alex Williamson)
- Remove unnecessary lock uses triggering lockdep splat (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iQIcBAABAgAGBQJZZ71TAAoJECObm247sIsi1mUP/1/5kubhHRE/Y11SnX4Bpie0
X6YVbV3WLGuV9jaFMI7EgYJLZ6pBvCRX0CLUzEdrbS4LAlTLQu2GSY5tqhcLJumE
0mV1Wj1jOO9BAur13/sJ+IohbZeK10dtbTkWv+YhrVSpRaLP+ituaKsajEV12WRH
6dxho2bqfvNcTC8yjE+vqe9mU3jXYPGuCx8oYGaDXEsCjzrdbOFnAG0/s/2cWpb+
D1ADHd3020VAHZRnHRBLFfMczza1jqllhSAUfdMw1gRGCQDq3k1XenzVNLLTbtYy
VmEWHa+R/OCfbKVxaDqPsgOTK7x7DKn+Pzb3lWCdQ8v5X+2ubHpVIYjxTDSSTbt3
YJ7a+hNk8AHkFgwS7x8BdOT8mmNGb1NZldjS4dv2VWkfcTnMQnubnYSCzGztto9h
P2THKBil6djPb9S3pCvtKUiHSIZedYZlKofUldrOdGDAZmzLLlf8lTzijGjDYKFM
pQeZC+xeEhZXURipgkH+a+paYgDtKEfwSlABODghjCcJf7S/GbyVPLOKLXzoVb2y
Ml8eGlo4O/cNniQK5faH447ilM7hzS1aG83uGnHTfe8VgKjI7Z5ZSxKOtoEq5bDz
bb91E6GVLKHqT0LVS1YZfrnqK0hX/QAd/sK1REM5nN8JNmPLyLpjv8FaJEhpk1vC
z4At5+pfKM8DYrW3EGmc
=3A4K
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.13-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Include Intel XXV710 in INTx workaround (Alex Williamson)
- Make use of ERR_CAST() for error return (Dan Carpenter)
- Fix vfio_group release deadlock from iommu notifier (Alex Williamson)
- Unset KVM-VFIO attributes only on group match (Alex Williamson)
- Fix release path group/file matching with KVM-VFIO (Alex Williamson)
- Remove unnecessary lock uses triggering lockdep splat (Alex Williamson)
* tag 'vfio-v4.13-rc1' of git://github.com/awilliam/linux-vfio:
vfio: Remove unnecessary uses of vfio_container.group_lock
vfio: New external user group/file match
kvm-vfio: Decouple only when we match a group
vfio: Fix group release deadlock
vfio: Use ERR_CAST() instead of open coding it
vfio/pci: Add Intel XXV710 to hidden INTx devices
The original intent of vfio_container.group_lock is to protect
vfio_container.group_list, however over time it's become a crutch to
prevent changes in container composition any time we call into the
iommu driver backend. This introduces problems when we start to have
more complex interactions, for example when a user's DMA unmap request
triggers a notification to an mdev vendor driver, who responds by
attempting to unpin mappings within that request, re-entering the
iommu backend. We incorrectly assume that the use of read-locks here
allow for this nested locking behavior, but a poorly timed write-lock
could in fact trigger a deadlock.
The current use of group_lock seems to fall into the trap of locking
code, not data. Correct that by removing uses of group_lock that are
not directly related to group_list. Note that the vfio type1 iommu
backend has its own mutex, vfio_iommu.lock, which it uses to protect
itself for each of these interfaces anyway. The group_lock appears to
be a redundancy for these interfaces and type1 even goes so far as to
release its mutex to allow for exactly the re-entrant code path above.
Reported-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: stable@vger.kernel.org # v4.10+
At the point where the kvm-vfio pseudo device wants to release its
vfio group reference, we can't always acquire a new reference to make
that happen. The group can be in a state where we wouldn't allow a
new reference to be added. This new helper function allows a caller
to match a file to a group to facilitate this. Given a file and
group, report if they match. Thus the caller needs to already have a
group reference to match to the file. This allows the deletion of a
group without acquiring a new reference.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Cc: stable@vger.kernel.org
If vfio_iommu_group_notifier() acquires a group reference and that
reference becomes the last reference to the group, then vfio_group_put
introduces a deadlock code path where we're trying to unregister from
the iommu notifier chain from within a callout of that chain. Use a
work_struct to release this reference asynchronously.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Cc: stable@vger.kernel.org
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It's a small cleanup to use ERR_CAST() here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
XXV710 has the same broken INTx behavior as the rest of the X/XL710
series, the interrupt status register is not wired to report pending
INTx interrupts, thus we never associate the interrupt to the device.
Extend the device IDs to include these so that we hide that the
device supports INTx at all to the user.
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Highlights include:
- Larger virtual address space on 64-bit server CPUs. By default we use a 128TB
virtual address space, but a process can request access to the full 512TB by
passing a hint to mmap().
- Support for the new Power9 "XIVE" interrupt controller.
- TLB flushing optimisations for the radix MMU on Power9.
- Support for CAPI cards on Power9, using the "Coherent Accelerator Interface
Architecture 2.0".
- The ability to configure the mmap randomisation limits at build and runtime.
- Several small fixes and cleanups to the kprobes code, as well as support for
KPROBES_ON_FTRACE.
- Major improvements to handling of system reset interrupts, correctly treating
them as NMIs, giving them a dedicated stack and using a new hypervisor call
to trigger them, all of which should aid debugging and robustness.
Many fixes and other minor enhancements.
Thanks to:
Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben
Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian
Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson,
Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli,
Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan,
Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev
Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler,
Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vSF3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights include:
- Larger virtual address space on 64-bit server CPUs. By default we
use a 128TB virtual address space, but a process can request access
to the full 512TB by passing a hint to mmap().
- Support for the new Power9 "XIVE" interrupt controller.
- TLB flushing optimisations for the radix MMU on Power9.
- Support for CAPI cards on Power9, using the "Coherent Accelerator
Interface Architecture 2.0".
- The ability to configure the mmap randomisation limits at build and
runtime.
- Several small fixes and cleanups to the kprobes code, as well as
support for KPROBES_ON_FTRACE.
- Major improvements to handling of system reset interrupts,
correctly treating them as NMIs, giving them a dedicated stack and
using a new hypervisor call to trigger them, all of which should
aid debugging and robustness.
- Many fixes and other minor enhancements.
Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
Yang Shi"
* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
powerpc/powernv: Fix TCE kill on NVLink2
powerpc/mm/radix: Drop support for CPUs without lockless tlbie
powerpc/book3s/mce: Move add_taint() later in virtual mode
powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
powerpc/smp: Document irq enable/disable after migrating IRQs
powerpc/mpc52xx: Don't select user-visible RTAS_PROC
powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
powerpc/eeh: Clean up and document event handling functions
powerpc/eeh: Avoid use after free in eeh_handle_special_event()
cxl: Mask slice error interrupts after first occurrence
cxl: Route eeh events to all drivers in cxl_pci_error_detected()
cxl: Force context lock during EEH flow
powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
powerpc/xmon: Teach xmon oops about radix vectors
powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
powerpc/pseries: Enable VFIO
powerpc/powernv: Fix iommu table size calculation hook for small tables
powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
powerpc: Add arch/powerpc/tools directory
...
vfio_pin_pages_remote() is typically called to iterate over a range
of memory. Testing CAP_IPC_LOCK is relatively expensive, so it makes
sense to push it up to the caller, which can then repeatedly call
vfio_pin_pages_remote() using that value. This can show nearly a 20%
improvement on the worst case path through VFIO_IOMMU_MAP_DMA with
contiguous page mapping disabled. Testing RLIMIT_MEMLOCK is much more
lightweight, but we bring it along on the same principle and it does
seem to show a marginal improvement.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With vfio_lock_acct() testing the locked memory limit under mmap_sem,
it's redundant to do it here for a single page. We can also reorder
our tests such that we can avoid testing for reserved pages if we're
not doing accounting and let vfio_lock_acct() test the process
CAP_IPC_LOCK. Finally, this function oddly returns 1 on success.
Update to return zero on success, -errno on error. Since the function
only pins a single page, there's no need to return the number of pages
pinned.
N.B. vfio_pin_pages_remote() can pin a large contiguous range of pages
before calling vfio_lock_acct(). If we were to similarly remove the
extra test there, a user could temporarily pin far more pages than
they're allowed.
Suggested-by: Kirti Wankhede <kwankhede@nvidia.com>
Suggested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the mmap_sem is contented then the vfio type1 IOMMU backend will
defer locked page accounting updates to a workqueue task. This has a
few problems and depending on which side the user tries to play, they
might be over-penalized for unmaps that haven't yet been accounted or
race the workqueue to enter more mappings than they're allowed. The
original intent of this workqueue mechanism seems to be focused on
reducing latency through the ioctl, but we cannot do so at the cost
of correctness. Remove this workqueue mechanism and update the
callers to allow for failure. We can also now recheck the limit under
write lock to make sure we don't exceed it.
vfio_pin_pages_remote() also now necessarily includes an unwind path
which we can jump to directly if the consecutive page pinning finds
that we're exceeding the user's memory limits. This avoids the
current lazy approach which does accounting and mapping up to the
fault, only to return an error on the next iteration to unwind the
entire vfio_dma.
Cc: stable@vger.kernel.org
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This adds missing checking for kzalloc() return value.
Fixes: 4b6fad7097 ("powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The existing SPAPR TCE driver advertises both VFIO_SPAPR_TCE_IOMMU and
VFIO_SPAPR_TCE_v2_IOMMU types to the userspace and the userspace usually
picks the v2.
Normally the userspace would create a container, attach an IOMMU group
to it and only then set the IOMMU type (which would normally be v2).
However a specific IOMMU group may not support v2, in other words
it may not implement set_window/unset_window/take_ownership/
release_ownership and such a group should not be attached to
a v2 container.
This adds extra checks that a new group can do what the selected IOMMU
type suggests. The userspace can then test the return value from
ioctl(VFIO_SET_IOMMU, VFIO_SPAPR_TCE_v2_IOMMU) and try
VFIO_SPAPR_TCE_IOMMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
So far iommu_table obejcts were only used in virtual mode and had
a single owner. We are going to change this by implementing in-kernel
acceleration of DMA mapping requests. The proposed acceleration
will handle requests in real mode and KVM will keep references to tables.
This adds a kref to iommu_table and defines new helpers to update it.
This replaces iommu_free_table() with iommu_tce_table_put() and makes
iommu_free_table() static. iommu_tce_table_get() is not used in this patch
but it will be in the following patch.
Since this touches prototypes, this also removes @node_name parameter as
it has never been really useful on powernv and carrying it for
the pseries platform code to iommu_free_table() seems to be quite
useless as well.
This should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds