There are several statements that are incorrectly indented. Fix these.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing firmware declaration caused firmware requirement to
not be noted by the module and may cause firmware to not
be available in initrd.
Fixes: bc4b539e38 "drm/amdgpu: remove old CI DPM implementation"
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ring hang happens amdgpu_dm_commit_planes during flip is holding
the BO reserved and then stack waiting for fences to signal in
reservation_object_wait_timeout_rcu (which won't signal because there
was a hnag). Then when we try to shutdown display block during reset
recovery from drm_atomic_helper_suspend we also try to reserve the BO
from dm_plane_helper_cleanup_fb ending in deadlock.
Also remove useless WARN_ON
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are no longer used, so delete them to avoid confusion.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CP_RB_DOORBELL_RANGE_LOWER/UPPER and CP_MEC_DOORBELL_RANGE_LOWER/UPPER
are used for waking up an idle scheduler and for power gating support.
Usually the first few doorbells in pci doorbell bar are used for RB
and all leftover for MEC. This patch fixes the incorrect settings.
Theoretically, gfx ring doorbells should come before all MEC doorbells
to be consistent with the design. However, since the doorbell
allocations are agreed by all and we are not free to change them, also
considering the kernel MEC ring doorbells which are before gfx ring
doorbells are not used often, we compromise by leaving the doorbell
allocations unchanged.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temporarily removing eviction fences to avoid triggering them by
accident is no longer necessary due to the fence_owner logic in
amdgpu_sync_resv.
As a result the ef_list usage of amdgpu_amdkfd_remove_eviction_fence
and amdgpu_amdkfd_add_eviction_fence are no longer needed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use FENCE_OWNER_KFD to synchronize PT/PD initialization and clearing
of page table entries. This avoids triggering KFD eviction fences on
the PD reservation objects of compute VMs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fence_owner logic in amdgpu_sync_wait will allow waiting without
having to temporarily remove eviction fences.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Creates a temporary sync object to wait for the BO reservation. This
generalizes amdgpu_vm_wait_pd.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov's gpu_recover inside xgpu_ai_mailbox_flr_work would cause duplicate recover in TDR.
TDR's gpu_recover would be triggered by amdgpu_job_timedout,
that could avoid vk-cts failure by unexpected recover.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the callback and call the dispatcher directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases (in mesa and applications) where one would open the
primary node without properly authenticating the client.
Sometimes we don't check if the authentication succeeds, but there's
also cases we simply forget to do it.
The former was a case for Mesa where it did not not check the return
value of drmGetMagic() [1]. That was fixed recently although, there's
the question of older drivers or other apps that exbibit this behaviour.
While omitting the call results in issues as seen in [2] and [3].
In the libva case, libva itself doesn't authenticate the DRM client and
the vaGetDisplayDRM documentation doesn't mention if the app should
either.
As of today, the official vainfo utility doesn't authenticate.
To workaround issues like these, some users resort to running their apps
under sudo. Which admittedly isn't always a good idea.
Since any DRIVER_RENDER driver has sufficient isolation between clients,
we can use that, for unauthenticated [primary node] ioctls that require
DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
v2:
- Rework/simplify if check (Daniel V)
- Add examples to commit messages, elaborate. (Daniel V)
v3:
- Use single unlikely (Daniel V)
[1] 2bc1f5c2e7/src/egl/drivers/dri2/platform_wayland.c (L1136)
[2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
[3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
Testcase: igt/core_unauth_vs_render
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
Currently only an authenticated master can authenticate another client.
In practise the client can only be master if CAP_SYS_ADMIN is present,
although having the CAP also sets the client as authenticated.
Thus DRM_AUTH in AUTH_MAGIC's "DRM_AUTH | DRM_MASTER" is superfluous.
Notices while working on IGT tests.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114084305.15141-1-emil.l.velikov@gmail.com
Don't warn or fail if it's missing.
v2: handle xgmi case more gracefully.
v3: handle older kernels properly
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXGL3ZBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwDz3AP49Ldp9TuuS/bMHWcZrPXRjiWJO
9lRaWV3mKqMFsAQzswD9Gy0+eybyaPQqRvLXXxwuk7Jrh8or2TOyOqDVeoDC4Q8=
=zCye
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2019-02-12' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: plane, ldb, and ipu-v3 fixes
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1549990602.4800.11.camel@pengutronix.de
Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.
Fix the error path while at it.
v2: Make relative vs. absolute conditional on the opregion version,
bumped for the purpose. Turned out there are machines relying on
absolute RVDA in the wild.
v3: Fix the version checks
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
(cherry picked from commit a0f52c3d35)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.
Add opregion version logging while at it.
v2: Fix the fix of the version check
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
(cherry picked from commit 98fdaaca95)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 26a11deea6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 2db76d7c3c ("lib/scatterlist: sg_page_iter: support sg lists w/o
backing pages") introduced the sg_page_iter_dma_address() function without
providing a way to use it in the general case. If the sg_dma_len() is not
equal to the sg length callers cannot safely use the
for_each_sg_page/sg_page_iter_dma_address combination.
Resolve this API mistake by providing a DMA specific iterator,
for_each_sg_dma_page(), that uses the right length so
sg_page_iter_dma_address() works as expected with all sglists.
A new iterator type is introduced to provide compile-time safety against
wrongly mixing accessors and iterators.
Acked-by: Christoph Hellwig <hch@lst.de> (for scatterlist)
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (ipu3-cio2)
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.
v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)
Fixes: 4e53840fdf ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
(cherry picked from commit b14c06ec02)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.
v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit b265a2a625)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With drmP.h removed from drm_modeset_helper.h the build of
komeda filed as reported by linux-next
Add missing include files to fix build.
For the files touched group include files and sort them.
The fix was tested on a tree with drm-misc-next merged.
And the patch was also tested to work without drm-misc-next merged.
Build tested on arm + x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [linux-next]
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Wang <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208221324.27002-1-sam@ravnborg.org
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140409.15280-1-kraxel@redhat.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
-----BEGIN PGP SIGNATURE-----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=jS/6
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208144721.25830-1-thierry.reding@gmail.com
Add a warn to verify the hrtimer_forward_now return and changes
ret_overrun from int to u64 to match the return value provided by
hrtimer_forward_now.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206200813.d5w7gjpepoeeadiy@smtp.gmail.com
This patch adds appropriate kernel documentation for DRM DP helpers
used for enabling Display Stream compression functionality in
drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec
related structure definitions and helpers in drm_dsc.c and drm_dsc.h
Also add links between the functions and structures in the documentation.
v3:
* Fix the checkpatch warnings (Sean Paul)
v2:
* Add inline comments for longer structs (Daniel Vetter)
* Split the summary and description (Daniel Vetter)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206213148.21390-1-manasi.d.navare@intel.com
P010 is a planar 4:2:0 YUV with interleaved UV plane, 10 bits per
channel video format.
P012 is a planar 4:2:0 YUV 12 bits per channel
P016 is a planar 4:2:0 YUV with interleaved UV plane, 16 bits per
channel video format.
V3: Added P012 and fixed cpp for P010.
V4: format definition refined per review.
V5: Format comment block for each new pixel format.
V6: reversed Cb/Cr order in comments.
v7: reversed Cb/Cr order in comments of header files, remove
the wrong part of commit message.
V8: reversed V7 changes except commit message and rebased.
v9: used the new properties to describe those format and
rebased.
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109195710.28501-2-ayaka@soulik.info
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The entity->dependency can go away completely once we've called
drm_sched_entity_add_dependency_cb() (if the cb is called before we
get around to tracing). The tracepoint is more useful if we trace
every dependency instead of just ones that get callbacks installed,
anyway, so just do that.
Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with
"perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we need multiple components for I915 for different purposes
(Audio & Mei_hdcp), we adopt the subcomponents methodology introduced
by the previous patch (mentioned below).
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jan 28 17:08:20 2019 +0530
components: multiple components for a device
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by-by: Ramalingam C <ramalinagm.c@intel.com> (commit message)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (code)
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Russell King <rmk+kernel@arm.linux.org.uk>
cc: Rafael J. Wysocki <rafael@kernel.org>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-4-daniel.vetter@ffwll.ch
Lots and lots of new drivers so far, a highlight being the MediaTek
BTCVSD which is a driver for a Bluetooth radio chip - the first such
driver we've had upstream. Hopefully we will soon also see a baseband
with an upstream driver!
- Support for only powering up channels that are actively being used.
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers.
- Lots of fixes for probing on Intel systems, trying to rationalize
things to look more standard from a framework point of view.
- New drivers for Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341,
Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek
BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum
DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlxde0wTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JWRB/9aQsLR22dNvKosiitTO/nnnPw/sUiG
cFZsI4G1mFpjXyC2azaY1MQOIjRZY3WDsRjcHtAJUkdJnz8fdyj74mIRoHrQI/yv
qdc7EtV5J0k0DemDQH2z5J7WjrkLg4aQCMT2XIvwrXL44jBv/iVKUE8l08D2AZ6t
hQiVIF/9iBnaJwqfUSKzJaufdd88Onh1dBljLGwZnRDtG9mndpxoi+S9pR6gwSMG
JzbgO4kUXdN95wKPxDsHFZimiSaX4bBo2cr79cisPrvcIKTyMAdtkAoNAcyuRezx
qiN2l4zz6Wxi8TygkBZfmWGKz2/2fMDWLvYwfEnA9PhddlSUZt/P1IPl
=tkEF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.1
Lots and lots of new drivers so far, a highlight being the MediaTek
BTCVSD which is a driver for a Bluetooth radio chip - the first such
driver we've had upstream. Hopefully we will soon also see a baseband
with an upstream driver!
- Support for only powering up channels that are actively being used.
- Quite a few improvements to simplify the generic card drivers,
especially the merge of the SCU cards into the main generic drivers.
- Lots of fixes for probing on Intel systems, trying to rationalize
things to look more standard from a framework point of view.
- New drivers for Asahi Kasei Microdevices AK4497, Cirrus Logic CS4341,
Google ChromeOS embedded controllers, Ingenic JZ4725B, MediaTek
BTCVSD, MT8183 and MT6358, NXP MICFIL, Rockchip RK3328, Spreadtrum
DMA controllers, Qualcomm WCD9335, Xilinx S/PDIF and PCM formatters.
Since the DPHY rework, one error path doesn't set the return error code
before jumping to its error label, which in turns make gcc (rightfully)
complain about the variable holding the error code being uninitialized.
Fix this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208090540.19626-1-maxime.ripard@bootlin.com
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
-----BEGIN PGP SIGNATURE-----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=ONtd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.0-rc6:
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoders on RZ/G1N SoC is similar to RZ/G1M. Add support for
RZ/G1N (R8A7744) SoC to the LVDS encoder driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
dal_gpio_open and dal_gpio_unlock_pin dereference hpd_gpio.
Check for NULL before calling those functions.
Fixes: ac627caf6b ("drm/amd/display: add gpio lock/unlock")
Reported-by: Przemek Socha <soprwa@gmail.com>
CC: Chiawen Huang <chiawen.huang@amd.com>
CC: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused drm/ to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on x86, arm, alpha, ia64 allmodconfig/allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-5-sam@ravnborg.org
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on arm allmodconfig/allyesconfig.
v2:
- new patch. Changes like drm_probe_helper and other
required several updates
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-4-sam@ravnborg.org
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused i915 to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
In the files touched the lists of include files was grouped
and sorted.
Build tested on x86 and arm allmodconfig / allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-3-sam@ravnborg.org
The LUTs are single buffered so we should program them after
the double buffered pipe updates have been latched by the
hardware.
We'll also fix up the IPS vs. split gamma w/a to do the IPS
disable like everyone else. Note that this is currently dead
code as we don't use the split gamma mode on HSW, but that
will be fixed up shortly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Split the color management hooks along the single vs. double
buffered registers line. Of the currently programmed registers
GAMMA_MODE and the ilk+ pipe CSC are double buffered, the
LUTS and CHV CGM block are single buffered.
The double buffered register will be programmed during the
normal pipe update with evasion, and also during pipe enable
so that the settings will already be correct when the pipe
starts up before the planes are enabled.
The single buffered registers are currently programmed before
the vblank evade. Which is totally wrong, but we'll correct
that later.
v2: Add some docs to explain the two vfuncs (Matt,Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
For bdw+ let's move the GAMMA_MODE write for the legacy LUT
mode into the .load_luts() funciton directly, rather than
relying on haswell_load_luts(). We'll be getting rid of
haswell_load_luts() entirely soon, and it's anyway cleaner
to have the GAMMA_MODE write in a single place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass the crtc state etc. as const to the color management commit
functions. And while at it polish some of the local variables.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We shouldn't be computing gamma mode during the commit phase.
Move it to the check phase.
v2: Reword comments a bit (Matt)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On g4x+ the pipe gamma enable bit for the primary plane affects
the pipe bottom color as well. The same for the pipe csc enable
bit on ilk+. Thus we must configure those bits correctly even
when the primary plane is disabled.
To make the feasible let's split those settings from the
plane_ctl() function into a seprate funciton that we can
call from the ->disable_plane() hook as well.
For consistency we'll do that on all the plane types. While
that has no real benefits at this time, it'll become useful
when we start to control the pipe gamma/csc enable bits
dynamically when we overhaul the color management code.
On pre-g4x there doesn't appear to be any way to gamma
correct the pipe bottom color, but sticking to the same
pattern doesn't hurt. And it'll still help us to do
crtc state readout correctly for the pipe gamma enable
bit for the color management overhaul.
An alternative apporach would be to still precompute these
bits into plane_state->ctl, but that would require that we
run through the plane check even when the plane isn't logically
enabled on any crtc. Currently that condition causes us to
short circuit the entire thing and not call ->check_plane().
There would also be some chicken and egg problems with
->check_plane() vs. crtc color state check that would
requite splitting certain things into multiple steps.
So all in all this seems like the easier route.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The exclusive fence is of course perfectly optional here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Fix SMU message format
Send override message after SMU enable features
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new Vega series GPU cards have in-built bridges. To get the pcie
speed and width supported by the platform walk the hierarchy and get the
slowest link.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently gathers of a hung job are getting NOP'ed and a restarted CDMA
executes the NOP'ed gathers. There shouldn't be a reason to not restart
CDMA execution starting with a next job, avoiding the unnecessary churning
with gathers NOP'ing.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is a chance that the last job has been completed at the time of
CDMA timeout handler invocation. In this case there is no need to complete
the completed job.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Host1x doesn't have information about jobs inter-dependency, that is
something that will become available once host1x will get a proper
jobs scheduler implementation. Currently a hang job causes other unrelated
jobs to be canceled, that is a relic from downstream driver which is
irrelevant to upstream. Let's cancel only the hanging job and not to touch
other jobs in queue.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The crossbar configuration is usually the same across all designs for a
given SoC generation. But sometimes there are designs that require some
other configuration.
Implement support for parsing the crossbar configuration from a device
tree. If the crossbar configuration is not present in the device tree,
fall back to the default crossbar configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.
While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Upon driver failure, the driver core will take care of clearing the
driver data, so there's no need to do so explicitly in the driver.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that cannot be addressed by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device. Note that, technically, the IOVA space needs to be restricted to
the intersection of the DMA masks for all clients that are attached to
the IOMMU domain. In practice using the DMA mask of the host1x device is
sufficient because all host1x clients share the same DMA mask.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move initialization of the shared IOMMU domain after the host1x device
has been initialized. At this point all the Tegra DRM clients have been
attached to the shared IOMMU domain.
This is important because Tegra186 and later use an ARM SMMU, for which
the driver defers setting up the geometry for a domain until a device is
attached to it. This is to ensure that the domain is properly set up for
a specific ARM SMMU instance, which is unknown at allocation time.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Loading the firmware requires an allocation of IOVA space to make sure
that the VIC's Falcon microcontroller can read the firmware if address
translation via the SMMU is enabled.
However, the allocation currently happens at a time where the geometry
of an IOMMU domain may not have been initialized yet. This happens for
example on Tegra186 and later where an ARM SMMU is used. Domains which
are created by the ARM SMMU driver postpone the geometry setup until a
device is attached to the domain. This is because IOMMU domains aren't
attached to a specific IOMMU instance at allocation time and hence the
input address space, which defines the geometry, is not known yet.
Work around this by postponing the firmware load until it is needed at
the time where a channel is opened to the VIC. At this time the shared
IOMMU domain's geometry has been properly initialized.
As a byproduct this allows the Tegra DRM to be created in the absence
of VIC firmware, since the VIC initialization no longer fails if the
firmware can't be found.
Based on an earlier patch by Dmitry Osipenko <digetx@gmail.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tegra DRM clients need access to their parent, so store a pointer to it
upon registration. It's technically possible to get at this by going via
the host1x client's parent and getting the driver data, but that's quite
complicated and not very transparent. It's much more straightforward and
natural to let the children know about their parent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
The host1x CDMA push buffer is terminated by a special opcode (RESTART)
that tells the CDMA to wrap around to the beginning of the push buffer.
To accomodate the RESTART opcode, an extra 4 bytes are allocated on top
of the 512 * 8 = 4096 bytes needed for the 512 slots (1 slot = 2 words)
that are used for other commands passed to CDMA. This requires that two
memory pages are allocated, but most of the second page (4092 bytes) is
never used.
Decrease the number of slots to 511 so that the RESTART opcode fits
within the page. Adjust the push buffer wraparound code to take into
account push buffer sizes that are not a power of two.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HOST1X_CHANNEL_DMAEND is an offset relative to the value written to
the HOST1X_CHANNEL_DMASTART register, but it is currently treated as an
absolute address. This can cause SMMU faults if the CDMA fetches past a
pushbuffer's IOMMU mapping.
Properly setting the DMAEND prevents the CDMA from fetching beyond that
address and avoid such issues. This is currently not observed because a
whole (almost) page of essentially scratch space absorbs any excessive
prefetching by CDMA. However, changing the number of slots in the push
buffer can trigger these SMMU faults.
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that is not addressable by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra186 and later support 40 bits of address space. Additional
registers need to be programmed to store the full 40 bits of push
buffer addresses.
Since command stream gathers can also reside in buffers in a 40-bit
address space, a new variant of the GATHER opcode is also introduced.
It takes two parameters: the first parameter contains the lower 32
bits of the address and the second parameter contains bits 32 to 39.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CDMA push buffer can currently only handle opcodes that take a
single word parameter. However, the host1x implementation on Tegra186
and later supports opcodes that require multiple words as parameters.
Unfortunately the way the push buffer is structured, these wide opcodes
cannot simply be composed of two regular opcodes because that could
result in the wide opcode being split across the end of the push buffer
and the final RESTART opcode required to wrap the push buffer around
would break the wide opcode.
One way to fix this would be to remove the concept of slots to simplify
push buffer operations. However, that's not entirely trivial and should
be done in a separate patch. For now, simply use a different function
to push four-word opcodes into the push buffer. Technically only three
words are pushed, with the fourth word used as padding to preserve the
2-word alignment required by the slots abstraction. The fourth word is
always a NOP opcode.
Additional care must be taken when the end of the push buffer is
reached. If a four-word opcode doesn't fit into the push buffer without
being split by the boundary, NOP opcodes will be introduced and the new
wide opcode placed at the beginning of the push buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When processing command streams, make sure the host1x's stream ID is
programmed for the channel so that addresses are properly translated
through the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
update_wm_post is meant for pre-g4x only. Don't ever set
it on g4x+.
The only effect of a bogus update_wm_post on g4x+ could
be that we clear the legacy_cursor_update flag in
intel_atomic_commit(). Since legacy_cursor_update is
only set for legacy cursor updates (as the name suggests)
and we only set update_wm_post for a modeset the two
cases should never occur at the same time. But let's
be consistent in setting update_wm_post so we don't
end up confusing so many people.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206185433.8116-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Apply backpressure to hogs that emit requests faster than the GPU can
process them by waiting for their ring to be less than half-full before
proceeding with taking the struct_mutex.
This is a gross hack to apply throttling backpressure, the long term
goal is to remove the struct_mutex contention so that each client
naturally waits, preferably in an asynchronous, nonblocking fashion
(pipelined operations for the win), for their own resources and never
blocks another client within the driver at least. (Realtime priority
goals would extend to ensuring that resource contention favours high
priority clients as well.)
This patch only limits excessive request production and does not attempt
to throttle clients that block waiting for eviction (either global GTT or
system memory) or any other global resources, see above for the long term
goal.
No microbenchmarks are harmed (to the best of my knowledge).
Testcase: igt/gem_exec_schedule/pi-ringfull-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207071829.5574-1-chris@chris-wilson.co.uk
Add err goto label and use it when VMA can't be established or changes
underneath.
v2:
- Dropping Fixes: as it's indeed impossible to race an object to the
error address. (Chris)
v3:
- Use IS_ERR_VALUE (Chris)
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v2
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-2-joonas.lahtinen@linux.intel.com
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
My @samusung.com address is going to cease existing soon, so change it to
an address which can actually be used to contact me.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This commit adds support for s5pv210.
Currently only NV12 and XRGB8888 formats are supported.
It was tested by using tool from
https://www.spinics.net/lists/linux-samsung-soc/msg60498.html
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
A patch set from Christoph for vmwgfx dma mode detection breakage with the
new dma code restructuring in 5.0
A couple of fixes also CC'd stable
Finally an improved IOMMU detection that automatically enables dma mapping
also with other vIOMMUS than the intel one if present and enabled.
Currently trying to start a VM in that case would fail catastrophically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206194735.4663-1-thellstrom@vmware.com
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131010015.GA32272@embeddedor
This hotplug also isn't needed: drm_dp_mst_topology_mgr_set_mst()
already sends a hotplug on its own from drm_dp_destroy_connector_work()
after destroying connectors in the MST topology.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-4-lyude@redhat.com
We have a bad habit of calling drm_fb_helper_hotplug_event() far more
then we actually need to. MST appears to be one of these cases, where we
call drm_fb_helper_hotplug_event() if we fail to resume a connected MST
topology in intel_dp_mst_resume(). We don't actually need to do this at
all though since hotplug events are already sent from
drm_dp_connector_destroy_work() every time connectors are unregistered
from userspace's PoV. Additionally, extra calls to
drm_fb_helper_hotplug_event() also just mean more of a chance of doing a
connector probe somewhere we shouldn't.
So, don't send any hotplug events during resume if the MST topology
fails to come up. Just rely on the DP MST helpers to send them for us.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-3-lyude@redhat.com
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
Looks like when making the final revision of:
commit 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
I forgot to remove some of the comments that I had added to
drm_dp_atomic_find_vcpi_slots() and drm_dp_atomic_release_vcpi_slots()
that were no longer valid due to us having removed the state->duplicated
checks from each function. This also introduced an error while building
the docs with sphinx:
./drivers/gpu/drm/drm_dp_mst_topology.c:3100: WARNING: Inline literal
start-string without end-string.
So, fix that by just removing the kerneldoc comments.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 022debad06 ("drm/atomic: Add drm_atomic_state->duplicated")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
[Why]
Pipe related init is possible to optimized if we know what we
intend to program, and if we can determine it matches what is
already programmed for the pipe.
[How]
First step is to isolate the pipe related init code
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Keep enable_stream_timing programming only
timing related stuff.
[How]
Move DRR and static screen mask programming from
enable_stream_timing to outside in
apply_single_controller_ctx_to_hw
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If we determine the stream we are trying to commit
matches HW, we want to try to optimize.
[How]
Try to acquire the HW resources that are already enabled
and optimize.
Also skip backend reprogramming
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to understand whether link is active aside from stream state.
This could be used to check what links are enabled by GOP.
[How]
Store link_active state in link status and initialize it by checking
if the DIG is enabled.
Keep it updated on every link enable and disable
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
More clearly isolate the code that is involved in programming of
vupdate interrupt
[How]
Add function for programming of vupdate interrupt.
Call it after timing is programmed.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need to figure out whether a timing we want to commit matches
something that GOP already programmed, in which case
we can decide to some optimizations
[How]
1. Add way to check for DIG FE
2. Add way to check for matching OTG timing
3. Add way to check for matching pixel clock (if possible)
- Currently only support DP for pixel clock, since it is easy to calc
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When moving mouse onto or off of pip plane,
screen would flash briefly due to garbage negative
pos values being programmed for cursor.
Also, text flashes due to PIP flips taking too long.
[How]
When negative pos value seen, default to 0 and adjust by modifying cursor hotspot.
For flip issue, only do post update when optimize required vs all the time.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current implementation that maps link_rate_set value to
actual link rate is incorrect.
[How]
Fix this implementation, such that link_rate_set indexes into
the supported_link_rate table.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM_helper needs to be intialized with the dc struct in order to fix
an unallocated memory issue. System aperture settings should be
initialized to 0 and guarded with a check to make sure vm_config
is valid.
[How]
Allocate and free memory for vm_helper with other dc members.
Check whether the vm_config valid bit is set before initializing
aperture settings.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Bandwidth calculation formulas currently do not take Stereo 3D + Stutter
properly into account. Disable stutter feature when we detect a Stereo
3D mode as a temporary workaround.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to calcualte vline position in DC for DCN.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dc_sink was released but the pointer on the aconnector was
not cleared.
[How]
Clear it.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are opt1c lock warnings and CRTC read timeouts when running the
"igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are
caused by trying to reprogram planes that are not in the current
context.
DPMS off removes the stream from the context. In this case:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are reprogrammed before the stream is removed from the
context because stream_state->mode_changed = false.
For DPMS adds the stream and planes back to the context:
new_crtc_state->active_changed = true
new_crtc_state->mode_changed = false
The planes are also reprogrammed here before the stream is added to the
context because stream_state->mode_changed = true. They were not
previously in the current context so warnings occur here.
[How]
Set stream_state->mode_changed = true when
new_crtc_state->active_changed = true too.
This prevents reprogramming before the context is applied in DC. The
programming will be done after the context is applied.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove extraneous parentheses around the comparison
to silence this warning
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On icl the plane watermark blocks field is 11 bits. Bump our define to
match so that readout won't ignore the extra bit. We can safely do this
for older platforms too since the unused bits are hardwired to zero.
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205205056.30081-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Since commit b4935e3a3c ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.
To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.
Fixes: b4935e3a3c ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com
Commit edb715dffd ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.
Fixes: edb715dffd ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com
Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.
Fixes: f3ed97f9ae ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
Certain SNB machines (eg. ASUS K53SV) seem to have a broken BIOS
which misprograms the hardware badly when encountering a suitably
high resolution display. The programmed pipe timings are somewhat
bonkers and the DPLL is totally misprogrammed (P divider == 0).
That will result in atomic commit timeouts as apparently the pipe
is sufficiently stuck to not signal vblank interrupts.
IIRC something like this was also observed on some other SNB
machine years ago (might have been a Dell XPS 8300) but a BIOS
update cured it. Sadly looks like this was never fixed for the
ASUS K53SV as the latest BIOS (K53SV.320 11/11/2011) is still
broken.
The quickest way to deal with this seems to be to shut down
the pipe+ports+DPLL. Unfortunately doing this during the
normal sanitization phase isn't quite soon enough as we
already spew several WARNs about the bogus hardware state.
But it's better than hanging the boot for a few dozen seconds.
Since this is limited to a few old machines it doesn't seem
entirely worthwile to try and rework the readout+sanitization
code to handle it more gracefully.
v2: Fix potential NULL deref (kbuild test robot)
Constify has_bogus_dpll_config()
Cc: stable@vger.kernel.org # v4.20+
Cc: Daniel Kamil Kozar <dkk089@gmail.com>
Reported-by: Daniel Kamil Kozar <dkk089@gmail.com>
Tested-by: Daniel Kamil Kozar <dkk089@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109245
Fixes: 516a49cc19 ("drm/i915: Fix assert_plane() warning on bootup with external display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111174950.10681-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
(cherry picked from commit 7bed8adcd9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205141846.6053-1-ville.syrjala@linux.intel.com
[Why]
This fixes an mpc programming error for the following sequence of
atomic commits when pipe split is enabled:
Commit 1: CRTC0 (plane 4, plane 3)
Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0
Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0
Commit 2: CRTC0 (plane 3), CRTC1 (plane 2)
Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0
Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1
Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL
Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL
In the second commit the assertion for mpcc in use is hit because
mpcc disconnect never occurs for pipe 1. This is because the stream
changes for pipe 1 and the opp_list is empty.
This sequence occurs when running the
"igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two
displays connected.
[How]
Expand the reset condition to include:
"old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg"
...but only when the plane state is non-NULL for both old and new.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It fixes the failure to create stream for sink in the scenario
when hotplug SST and MST in sequence, and disconnect MST.
[How]
Add the fake sink back after the majority of MST rework is done.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a bit vector to allow forcing odm on specific otgs
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in program_timing_sync, after all the pipes are
grouped, store timing sync info in dc_stream_status
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Reduced backlight for ABM 2.2 at levels 1 and 2 is desired for
power savings.
[How]
Reduce the max reduction parameters for ABM 2.2
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When querying HPD via GPIO flow,
it will create a new gpio object then free in the end of query.
There is a irql issue for HPD querying at ISR level.
[How]
Therefore, creating the HPD gpio object in dc_link and set it as unlcok in default.
1. reducing unnecessary malloc/free when HPD querying.
2. reducing init GPIO flow.
3. add lock/unlock to prevent multi gpio service running.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
is_blanked is not a general indicator of if a pipe is synced
for all asics.
plane state is more accurate and applicable for all asics.
[how]
Remove is_blanked call and
add checking plane_state against NULL instead.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On HW that doesn't have input LUT, we may combine degamma with OS ramp
Problem here is that it assumes DGAM is inverse of PQ or SRGB. It doesn't
handle linear case, it would default to sRGB and always enable DGAM..
[How] Add handling for linear case. Also check for null ramp and instead of
blowing up, assume it's identity.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting monitor refresh rate below freesync range would cause the
monitor to go blank indefinitely with freesync enabled
[How]
Set vrr_supported and ignore_msa_timing_param according to whether
the refresh rate is above or below the minimum freesync frequency.
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Second screen to clone/extend mode, driver will send ABM pipe
command to DMCU. Change mode from clone/extend to second
screen only, driver send ABM level command to disable ABM but
this command will not clear ABM pipe data. At this time, change
second screen to PC screen only, driver will send first command
"ABM_LEVEL", it will turn on ABM with incorrect ABM pile so that
DMCU is blocking.
[How]
When driver try to disable ABM, change command from "ABM LEVEL"
to "ABM PIPE" so that it will clear ABM pile data.
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The problem is that we accidentally stopped loading some of the IRAM bytes
used for the backlight ramping mechanism. This happened when we
started reserving some region of IRAM as DMCU FW write only.
[How]
This change will define a start+end region for the IRAM read only region.
So the parameters needed for the backlight operation will be loaded
since it will be defined outside of the read only region.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Different panel need different time from backlight disable to end of valid video data,
if the time is too short, panel will flash when dpms off
[How]
Add monitor patch to control the time from backlight disable to end of valid video data,
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This provides little debug value and creates a lot of dmesg noise.
[How]
Remove it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The stream_update struct is left unitialized but DC will access
its fields. This usually results in global state validation occur
during any atomic commit with state->allow_modeset = true.
[How]
Initialize the struct to zero for every stream we check.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The indenting for this function is a few levels too deep and can be
simplified a fair bit. This patch is in preparation for functional
changes that fix update type determination to occur less frequently
and more accurately.
[How]
Place checks early and exit/continue when possible. This isn't
a functional change.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We were always passing the first surface on the stream status for
flip updates when we should be using the surface associated with
the plane.
[How]
Use the dc_plane_state from the plane that's being updated.
FreeSync should also only keep track of updates from the primary
plane, so the check needed to be updated.
The acrtc->stream state doesn't need to be checked for NULL before
updating FreeSync either since there needs to be a stream to be
inside this function as a prerequisite.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Most surface updates weren't propagated onto the surface during
dc_commit_updates_for_stream. This makes it more difficult for DC to
determine the actual surface update type required.
[How]
Use copy_surface_update_to_plane to propagate the changes. The FreeSync
surface timing information update for BTR has been moved out of
amdgpu_dm.c into this function as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
"IRQ_HPD Pulse Length Test" DP compliance test
fails. Test complains that certain DPCD registers
are not read within 100 ms.
[How]
msleep is inaccurate for small values. Used udelay
instead for accuracy.
Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we open up the possibility to use uninitialized memory.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[What]
FBC fails to get enabled when switched between LINEAR(console/VT)
and non-LINEAR(GUI) based rendering due to default value of
tiling info stored in the current_state which is used for deciding
whether or not to turn FBC on or off.
[How]
Use context structure's tiling information which is coherant with
the screen updates.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When CONFIG_DEBUG_FS isn't defined then amdgpu_dm_crtc_set_crc_source
is NULL. This causes a compilation error since it's being called
unconditionally.
[How]
Guard the call based on CONFIG_DEBUG_FS - CRC capture isn't supported
without this.
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Fixes: 43a6a02eb3 ("drm/amd/display: Re-enable CRC capture following modeset")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I'm not increasing the DRM version because GDS isn't totally without bugs yet.
v2: update emit_ib_size
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New chunk for dependency on start of job's execution instead on
the end. This is used for GPU deadlock prevention when
userspace uses mid-IB fences to wait for mid-IB work on other rings.
v2: Fix typo in AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES
v3: Bump KMS version
v4: put old fence AFTER acquiring the scheduled fence.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update soc boot and max level,then uclk isn't stuck
at minimum.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109462
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:2314:38:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
struct dc_surface_dcc_cap output = {0};
^
{}
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 7df7e505e8 ("drm/amd/display: Set requested plane state DCC params for GFX9")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5089:60:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
struct dc_surface_update dummy_updates[MAX_SURFACES] = { 0 };
^
{}
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 02d6a6fcdf ("drm/amd/display: Simplify underscan and ABM commit")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:50:57:
warning: suggest braces around initialization of subobject
[-Wmissing-braces]
union training_aux_rd_interval training_rd_interval = {0};
^
{}
1 warning generated.
Previous efforts to fix this type of warning by adding or removing
braces have been met with some pushback in favor of using memset [1][2].
Do that here, mirroring commit 05794eff1a ("drm/amdgpu/gmc: fix
compiler errors [-Werror,-Wmissing-braces] (V2)") in this tree.
[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/
Fixes: 3cec41769d ("drm/amd/display: Fix use of uninitialized union")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic checks should never modify anything outside of the state that
they're passed in. Unfortunately this appears to be exactly what we're
doing in nv50_msto_atomic_check() where we update mstc->pbn every time
the function is called. This hasn't caused any bugs yet, but it needs to
be fixed in order to ensure that when committing an artificially
duplicated state (like during system resume), that we reuse the PBN of
that state to perform VCPI allocations and don't recalculate a different
value from the drm connector's reported bpc.
Also, move the VCPI slot allocations while we're at it as well. With
this, removing a topology in suspend while using nouveau no longer
causes the new atomic VCPI helpers to complain.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
Since
commit 39b50c6038 ("drm/atomic_helper: Stop modesets on unregistered
connectors harder")
We've been failing atomic checks if they try to enable new displays on
unregistered connectors. This is fine except for the one situation that
breaks atomic assumptions: suspend/resume. If a connector is
unregistered before we attempt to restore the atomic state, something we
end up failing the atomic check that happens when trying to restore the
state during resume.
Normally this would be OK: we try our best to make sure that the atomic
state pre-suspend can be restored post-suspend, but failures at that
point usually don't cause problems. That is of course, until we
introduced the new atomic MST VCPI helpers:
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
[drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
RSP: 0018:ffff88841235f268 EFLAGS: 00010246
RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
? __printk_safe_exit+0x10/0x10
? save_stack+0x8c/0xb0
? vprintk_func+0x96/0x1bf
? __printk_safe_exit+0x10/0x10
intel_atomic_check+0x234/0x4750 [i915]
? printk+0x9f/0xc5
? kmsg_dump_rewind_nolock+0xd9/0xd9
? _raw_spin_lock_irqsave+0xa4/0x140
? drm_atomic_check_only+0xb1/0x28b0 [drm]
? drm_dbg+0x186/0x1b0 [drm]
? drm_dev_dbg+0x200/0x200 [drm]
? intel_link_compute_m_n+0xb0/0xb0 [i915]
? drm_mode_put_tile_group+0x20/0x20 [drm]
? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
? drm_plane_check_pixel_format+0x14a/0x310 [drm]
drm_atomic_check_only+0x13c4/0x28b0 [drm]
? drm_state_info+0x220/0x220 [drm]
? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
? kasan_unpoison_shadow+0x35/0x40
drm_atomic_commit+0x3b/0x100 [drm]
drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
drm_mode_setcrtc+0x636/0x1660 [drm]
? vprintk_func+0x96/0x1bf
? drm_dev_dbg+0x200/0x200 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? printk+0x9f/0xc5
? mutex_unlock+0x1d/0x40
? drm_mode_addfb2+0x2e9/0x3a0 [drm]
? rcu_sync_dtor+0x2e0/0x2e0
? drm_dbg+0x186/0x1b0 [drm]
? set_page_dirty+0x271/0x4d0
drm_ioctl_kernel+0x203/0x290 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_setversion+0x7f0/0x7f0 [drm]
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x34/0x70
drm_ioctl+0x445/0x950 [drm]
? drm_mode_getcrtc+0x790/0x790 [drm]
? drm_getunique+0x220/0x220 [drm]
? expand_files.part.10+0x920/0x920
do_vfs_ioctl+0x1a1/0x13d0
? ioctl_preallocate+0x2b0/0x2b0
? __fget_light+0x2d6/0x390
? schedule+0xd7/0x2e0
? fget_raw+0x10/0x10
? apic_timer_interrupt+0xa/0x20
? apic_timer_interrupt+0xa/0x20
? rcu_cleanup_dead_rnp+0x2c0/0x2c0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x136/0x440
? syscall_return_slowpath+0x2d0/0x2d0
? do_page_fault+0x89/0x330
? __do_page_fault+0x9c0/0x9c0
? prepare_exit_to_usermode+0x188/0x200
? perf_trace_sys_enter+0x1090/0x1090
? __x64_sys_sigaltstack+0x280/0x280
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f16ff89a09b
Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
---[ end trace d536c05c13c83be2 ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a
This appears to be happening because we destroy the VCPI allocations
when disabling all connected displays while suspending, and those VCPI
allocations don't get restored on resume due to failing to restore the
atomic state.
So, fix this by introducing the suspending option to
drm_atomic_helper_duplicate_state() and use that to indicate in the
atomic state that it's being used for suspending or resuming the system,
and thus needs to be fixed up by the driver. We can then use the new
state->duplicated hook to tell update_connector_routing() in
drm_atomic_check_modeset() to allow for modesets on unregistered
connectors, which allows us to restore atomic states that contain MST
topologies that were removed after the state was duplicated and thus:
mostly fixing suspend and resume. This just leaves some issues that were
introduced with nouveau, that will be addressed next.
Changes since v3:
* Remove ->duplicated hunks that I left in the VCPI helpers by accident.
These don't need to be here, that was the supposed to be the purpose
of the last revision
Changes since v2:
* Remove the changes in this patch to the VCPI helpers, they aren't
needed anymore
Changes since v1:
* Rename suspend_or_resume to duplicated
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
[Why]
eDP was missing in the checks for supported VRR connectors.
[How]
Attach the properties for eDP connectors too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202449
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_vm_get_task_info is called from interrupt handler and sched timeout
workqueue, we should use irq version spin_lock to avoid deadlock.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we now have an easy way of refcounting drm_dp_mst_port structs and
safely accessing their contents, there isn't any good reason to keep
validating ports here. It doesn't prevent us from performing modesets on
branch devices that have been removed either, and we already disallow
enabling new displays on unregistered connectors in
update_connector_routing() in drm_atomic_check_modeset(). All it does is
cause us to have to make weird special exceptions in our atomic
modesetting code. So, get rid of it entirely.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-3-lyude@redhat.com
Disabling WM1+ on ICL causes tons of underruns with
linear/X-tiled framebuffers. We can avoid this by flipping
on a chicken bit affecting the way the hw fill the FIFO.
This may not be the final solution but should hopefully
avoid some underruns in the meantime.
v2: Apparently PIPE_CHICKEN is icl+ only
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204202232.27153-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
When adding the early latency==0 check back I neglected to
realize that we no longer have a way to return a failure
from the wm computation like we had in the past (since we
now calculate wms before ddb allocations). Also plane_en
being false doesn't actually indicate that the level is
invalid as it wil also happen when the plane is not
enabled.
skl_allocate_pipe_ddb() starts scanning from the maximum
watermark level and it stops as soon as it finds a level
that is deemed viable. The assumption being that if level
n+1 is valid then level n is valid as well. Thus if we
now disable any watermark level by zeroing its latency
the code will think that level to be actually valid
and won't confirm whether the actually enabled lower
watermark level(s) actually fit into the allotted ddb
space. This results in hilarious watermark values that
exceed the ddb allocation of the plane.
The way we must now indicate a failure is to assign an
unreasoanbly big value to min_ddb_alloc which will then
make skl_allocate_pipe_ddb() reject the entire level.
v2: Also do the same for the lines>31 case (Matt)
v3: Make 'blocks' u32 (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205155053.10081-1-ville.syrjala@linux.intel.com
clear_intel_crtc_state() uses the stack for saving a temporary copy of
certain bits of the inherited crtc_state before clearing the unwanted
bits. This pushes it over the stack limit for my little 32b Pineview,
so move the temporary allocation to the heap instead. As we now use a
zeroed struct, we can copy the whole extended state back to both
preserve what bits need to be preserved and zero the rest.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205092759.16018-1-chris@chris-wilson.co.uk
We generally omit register polling from the i915_reg_rw tracepoint.
Understandable since polling could generate a lot of noise in the
trace. The downside is that the trace is incomplete. As a compromise
let's trace the final register value observed while polling. That
should be generally sufficient to observe what the code should be
doing next.
I suppose in some cases it might make sense to also trace the initial
register value, and maybe the number of times we polled. But that
would require a separate tracepoint so let's leave it for the future.
The other users of _NOTRACE() are i915_pmu and i2c bitbanging,
which I decided to leave alone.
Next we should do something to claw back the tracepoints for
planes and whatnot which were switched to _FW() a while back.
I guess just new macros for raw_rw+trace. The question is
what to call it?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204211644.21967-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The contents of struct encoder_kickoff_params are never used. Remove the
structure and all remnants of it from function calls.
Changes in v2 (seanpaul):
- Actually remove the struct (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When calling debugfs functions, they can now return error values if
something went wrong. If that happens, return a NULL as a *dentry to
the relay core instead of passing it an illegal pointer.
The relay core should be able to handle an illegal pointer, but add this
check to be safe.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131131507.GA19807@kroah.com
First of all GMCH can be considered a feature by itself
since it is a chip present in some platforms that connects
the IA processor to memory and other components in PC.
Also with the introduction of display block at device info,
we got a redundant definition:
.display.has_gmch_display = 1,
So, let's clean up things a bit and use the standardized
way of has_feature on displays side.
No functional change and no manual interaction to generate
this patch.
It is only:
sed -si -e 's/has_gmch_display/has_gmch/g' \
-e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h}
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
Looking forward, we need to break the struct_mutex dependency on
i915_gem_active. In the meantime, external use of i915_gem_active is
quite beguiling, little do new users suspect that it implies a barrier
as each request it tracks must be ordered wrt the previous one. As one
of many, it can be used to track activity across multiple timelines, a
shared fence, which fits our unordered request submission much better. We
need to steer external users away from the singular, exclusive fence
imposed by i915_gem_active to i915_active instead. As part of that
process, we move i915_gem_active out of i915_request.c into
i915_active.c to start separating the two concepts, and rename it to
i915_active_request (both to tie it to the concept of tracking just one
request, and to give it a longer, less appealing name).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-5-chris@chris-wilson.co.uk
Wrap the active tracking for a GPU references in a slabcache for faster
allocations, and hopefully better fragmentation reduction.
v3: Nothing device specific left, it's just a slabcache that we can
make global.
v4: Include i915_active.h and don't put the initfunc under DEBUG_GEM
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-4-chris@chris-wilson.co.uk
As soon as we detect that the active tracker is idle and we prepare to
call the retire callback, release the storage for our tree of
per-timeline nodes. We expect these to be infrequently used and quick
to allocate, so there is little benefit in keeping the tree cached and
we would prefer to return the pages back to the system in a timely
fashion.
This also means that when we finalize the struct as a whole, we know as
the activity tracker must be idle, the tree has already been released.
Indeed we can reduce i915_active_fini() just to the assertions that there
is nothing to do.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-3-chris@chris-wilson.co.uk
We currently track GPU memory usage inside VMA, such that we never
release memory used by the GPU until after it has finished accessing it.
However, we may want to track other resources aside from VMA, or we may
want to split a VMA into multiple independent regions and track each
separately. For this purpose, generalise our request tracking (akin to
struct reservation_object) so that we can embed it into other objects.
v2: Tweak error handling during selftest setup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-2-chris@chris-wilson.co.uk
Even if we don't have the correct clock and get a warning, we should not
skip the return.
v2: improve commit message (from Joonas)
Fixes: 1fa11ee2d9 ("drm/i915/icl: start adding the TBT pll")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125222444.19926-3-lucas.demarchi@intel.com
(cherry picked from commit 7a61a6dec3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're incorrectly masking off the R/V channel enable bit from
KEYMSK. Fix it up.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: b208152556 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125183846.28755-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 968bf969b4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
instead of relying on intel_iommu_enabled, use the fact that the
dma_map_ops::map_page != dma_direct_map_page.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Previously we set only the dma mask and not the coherent mask. Fix that.
Also, for clarity, make sure both are initially set to 64 bits.
Cc: <stable@vger.kernel.org>
Fixes: 0d00c488f3de: ("drm/vmwgfx: Fix the driver for large dma addresses")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
During modeset check it is possible to have all crtc_state's in atomic
state. Check for crtc enable status while checking for display unit
active status. Only error if enabling a crtc while display unit is not
active.
Cc: <stable@vger.kernel.org>
Fixes: 9da6e26c0aae: ("drm/vmwgfx: Fix a layout race condition")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
if vmw_execbuf_fence_commands() fails, The handle value will be
uninitialized and a bogus fence handle might be copied to user-space.
Cc: <stable@vger.kernel.org>
Fixes: 2724b2d54cda: ("drm/vmwgfx: Use new validation interface for the modesetting code v2")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com> #v1
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #v1
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The function was unconditionally returning 0, and a caller would have to
rely on the returned fence pointer being NULL to detect errors. However,
the function vmw_execbuf_copy_fence_user() would expect a non-zero error
code in that case and would BUG otherwise.
So make sure we return a proper non-zero error code if the fence pointer
returned is NULL.
Cc: <stable@vger.kernel.org>
Fixes: ae2a104058e2: ("vmwgfx: Implement fence objects")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Exercise the context image reconfiguration logic for idle and busy
contexts, with the resets thrown into the mix as well.
Free from the uAPI restrictions this test runs on all Gen9+ platforms
with slice power gating.
v2:
* Rename some helpers for clarity.
* Include subtest names in error logs.
* Remove unnecessary function export.
v3:
* Rebase for RUNTIME_INFO.
v4:
* Fix incomplete unexport from v2. (Chris Wilson)
v5:
* Rebased for runtime pm api changes.
v6:
* Rebased for i915_reset.c.
v7:
* Tidy checkpatch warnings.
* Consolidate error checking and logging a bit.
* Skip idle test phase if something failed before it.
v8:
(Chris Wilson)
* Fix i915_request_wait error handling.
* No need to PIN_HIGH the VMA.
* Remove pointless GEM_BUG_ON before pointer dereference.
v9:
* Avoid rq leak if rpcs query fails. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # v6
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-5-tvrtko.ursulin@linux.intel.com
We want to allow userspace to reconfigure the subslice configuration on a
per context basis.
This is required for the functional requirement of shutting down non-VME
enabled sub-slices on Gen11 parts.
To do so, we expose a context parameter to allow adjustment of the RPCS
register stored within the context image (and currently not accessible via
LRI).
If the context is adjusted before first use or whilst idle, the adjustment
is for "free"; otherwise if the context is active we queue a request to do
so (using the kernel context), following all other activity by that
context, which is also marked as barrier for all following submission
against the same context.
Since the overhead of device re-configuration during context switching can
be significant, especially in multi-context workloads, we limit this new
uAPI to only support the Gen11 VME use case. In this use case either the
device is fully enabled, and exactly one slice and half of the subslices
are enabled.
Example usage:
struct drm_i915_gem_context_param_sseu sseu = { };
struct drm_i915_gem_context_param arg = {
.param = I915_CONTEXT_PARAM_SSEU,
.ctx_id = gem_context_create(fd),
.size = sizeof(sseu),
.value = to_user_pointer(&sseu)
};
/* Query device defaults. */
gem_context_get_param(fd, &arg);
/* Set VME configuration on a 1x6x8 part. */
sseu.slice_mask = 0x1;
sseu.subslice_mask = 0xe0;
gem_context_set_param(fd, &arg);
v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu()
(Lionel)
v3: Add ability to program this per engine (Chris)
v4: Move most get_sseu() into i915_gem_context.c (Lionel)
v5: Validate sseu configuration against the device's capabilities (Lionel)
v6: Change context powergating settings through MI_SDM on kernel context
(Chris)
v7: Synchronize the requests following a powergating setting change using
a global dependency (Chris)
Iterate timelines through dev_priv.gt.active_rings (Tvrtko)
Disable RPCS configuration setting for non capable users
(Lionel/Tvrtko)
v8: s/union intel_sseu/struct intel_sseu/ (Lionel)
s/dev_priv/i915/ (Tvrtko)
Change uapi class/instance fields to u16 (Tvrtko)
Bump mask fields to 64bits (Lionel)
Don't return EPERM when dynamic sseu is disabled (Tvrtko)
v9: Import context image into kernel context's ppgtt only when
reconfiguring powergated slice/subslices (Chris)
Use aliasing ppgtt when needed (Michel)
Tvrtko Ursulin:
v10:
* Update for upstream changes.
* Request submit needs a RPM reference.
* Reject on !FULL_PPGTT for simplicity.
* Pull out get/set param to helpers for readability and less indent.
* Use i915_request_await_dma_fence in add_global_barrier to skip waits
on the same timeline and avoid GEM_BUG_ON.
* No need to explicitly assign a NULL pointer to engine in legacy mode.
* No need to move gen8_make_rpcs up.
* Factored out global barrier as prep patch.
* Allow to only CAP_SYS_ADMIN if !Gen11.
v11:
* Remove engine vfunc in favour of local helper. (Chris Wilson)
* Stop retiring requests before updates since it is not needed
(Chris Wilson)
* Implement direct CPU update path for idle contexts. (Chris Wilson)
* Left side dependency needs only be on the same context timeline.
(Chris Wilson)
* It is sufficient to order the timeline. (Chris Wilson)
* Reject !RCS configuration attempts with -ENODEV for now.
v12:
* Rebase for make_rpcs.
v13:
* Centralize SSEU normalization to make_rpcs.
* Type width checking (uAPI <-> implementation).
* Gen11 restrictions uAPI checks.
* Gen11 subslice count differences handling.
Chris Wilson:
* args->size handling fixes.
* Update context image from GGTT.
* Postpone context image update to pinning.
* Use i915_gem_active_raw instead of last_request_on_engine.
v14:
* Add activity tracker on intel_context to fix the lifetime issues
and simplify the code. (Chris Wilson)
v15:
* Fix context pin leak if no space in ring by simplifying the
context pinning sequence.
v16:
* Rebase for context get/set param locking changes.
* Just -ENODEV on !Gen11. (Joonas)
v17:
* Fix one Gen11 subslice enablement rule.
* Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson)
v18:
* Update commit message. (Joonas)
* Restrict uAPI to VME use case. (Joonas)
v19:
* Rebase.
v20:
* Rebase for ce->active_tracker.
v21:
* Rebase for IS_GEN changes.
v22:
* Reserve uAPI for flags straight away. (Chris Wilson)
v23:
* Rebase for RUNTIME_INFO.
v24:
* Added some headline docs for the uapi usage. (Joonas/Chris)
v25:
* Renamed class/instance to engine_class/engine_instance to avoid clash
with C++ keyword. (Tony Ye)
v26:
* Rebased for runtime pm api changes.
v27:
* Rebased for intel_context_init.
* Wrap commit msg to 75.
v28:
(Chris Wilson)
* Use i915_gem_ggtt.
* Use i915_request_await_dma_fence to show a better example.
v29:
* i915_timeline_set_barrier can now fail. (Chris Wilson)
v30:
* Capture some acks.
v31:
* Drop the WARN_ON from use controllable paths. (Chris Wilson)
* Use overflows_type for all checks.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634
Issue: https://github.com/intel/media-driver/issues/267
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zhipeng Gong <zhipeng.gong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Stéphane Marchesin <marcheu@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
Timeline barrier allows serialization between different timelines.
After calling i915_timeline_set_barrier with a request, all following
submissions on this timeline will be set up as depending on this request,
or barrier. Once the barrier has been completed it automatically gets
cleared and things continue as normal.
This facility will be used by the upcoming context SSEU code.
v2:
* Assert barrier has been retired on timeline_fini. (Chris Wilson)
* Fix mock_timeline.
v3:
* Improved comment language. (Chris Wilson)
v4:
* Maintain ordering with previous barriers set on the timeline.
v5:
* Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-3-tvrtko.ursulin@linux.intel.com
If some of the contexts submitting workloads to the GPU have been
configured to shutdown slices/subslices, we might loose the NOA
configurations written in the NOA muxes.
One possible solution to this problem is to reprogram the NOA muxes
when we switch to a new context. We initially tried this in the
workaround batchbuffer but some concerns where raised about the cost
of reprogramming at every context switch. This solution is also not
without consequences from the userspace point of view. Reprogramming
of the muxes can only happen once the powergating configuration has
changed (which happens after context switch). This means for a window
of time during the recording, counters recorded by the OA unit might
be invalid. This requires userspace dealing with OA reports to discard
the invalid values.
Minimizing the reprogramming could be implemented by tracking of the
last programmed configuration somewhere in GGTT and use MI_PREDICATE
to discard some of the programming commands, but the command streamer
would still have to parse all the MI_LRI instructions in the
workaround batchbuffer.
Another solution, which this change implements, is to simply disregard
the user requested configuration for the period of time when i915/perf
is active.
On most platforms there are no issues with this apart from a performance
penality for some media workloads that benefit from running on a partially
powergated GPU. We already prevent RC6 from affecting the programming so
it doesn't sound completely unreasonable to hold on powergating for the
same reason.
On Icelake however there would a functional problem if the slices not-
containing the VME block were left enabled with a running media workload
which explicitly disabled them. To avoid a GPU hang in this case, on
Icelake we lock the enablement to only slices which contain VME blocks.
Downside is that it means degraded GPU performance when OA is active but
there is no known alternative solution for this.
v2: Leave RPCS programming in intel_lrc.c (Lionel)
v3: Update for s/union intel_sseu/struct intel_sseu/ (Lionel)
More to_intel_context() (Tvrtko)
s/dev_priv/i915/ (Tvrtko)
Tvrtko Ursulin:
v4:
* Rebase for make_rpcs changes.
v5:
* Apply OA restriction from make_rpcs directly.
v6:
* Rebase for context image setup changes.
v7:
* Move stream assignment before metric enable.
v8-9:
* Rebase.
v10:
* Squashed with ICL support patch.
Bspec: 21140
Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v9
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-2-tvrtko.ursulin@linux.intel.com
We want to expose the ability to reconfigure the slices, subslice and
eu per context and per engine. To facilitate that, store the current
configuration on the context for each engine, which is initially set
to the device default upon creation.
v2: record sseu configuration per context & engine (Chris)
v3: introduce the i915_gem_context_sseu to store powergating
programming, sseu_dev_info has grown quite a bit (Lionel)
v4: rename i915_gem_sseu into intel_sseu (Chris)
use to_intel_context() (Chris)
v5: More to_intel_context() (Tvrtko)
Switch intel_sseu from union to struct (Tvrtko)
Move context default sseu in existing loop (Chris)
v6: s/intel_sseu_from_device_sseu/intel_device_default_sseu/ (Tvrtko)
Tvrtko Ursulin:
v7:
* Pass intel_sseu by pointer instead of value to make_rpcs.
* Rebase for make_rpcs changes.
v8:
* Rebase for RPCS edit on pin.
v9:
* Rebase for context image setup changes.
v10:
* Rename dev_priv to i915. (Chris Wilson)
v11:
* Rebase.
v12:
* Rebase for IS_GEN changes.
v13:
* Rebase for RUNTIME_INFO.
v14:
* Rebase for intel_context_init.
v15:
* Rebase for drm-tip changes.
v16:
* Moved struct intel_sseu definition to i915_gem_context.h.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-1-tvrtko.ursulin@linux.intel.com
ttm_fbdev_mmap() just doesn't work. It appears to work fine, mmap()
returns success, but any attempt to actually access the mapping causes a
SIGBUS.
We can just use drm_gem_prime_mmap() instead. Almost. We have to copy
over the start offset from the ttm_buffer_object vm_node to the
drm_gem_object vm_node so the offset math in drm_gem_prime_mmap() works
correctly for us even though we use ttm to manage our objects.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190204183858.8976-1-kraxel@redhat.com
Commit "f4bd542bca drm/fb-helper: Scale back depth to supported maximum"
uncovered a bug in the cirrus driver. It must create its own primary
plane, using the correct format list, depending on the bpp module
parameter, so it is consistent with mode_config->preferred_depth.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190204110131.21467-1-kraxel@redhat.com
Limit the NEWCLIENT boost to only give its small priority boost to fresh
clients only that have no dependencies.
The idea for using NEWCLIENT boosting, commit b16c765122 ("drm/i915:
Priority boost for new clients"), is that short-lived streams are often
interactive and require lower latency -- and that by executing those
ahead of the long running hogs, the short-lived clients do little to
interfere with the system throughput by virtue of their short-lived
nature. However, we were only considering the client's own timeline for
determining whether or not it was a fresh stream. This allowed for
compositors to wake up before their vblank and bump all of its client
streams. However, in testing with media-bench this results in chaining
all cooperating contexts together preventing us from being able to
reorder contexts to reduce bubbles (pipeline stalls), overall increasing
latency, and reducing system throughput. The exact opposite of our
intent. The compromise of applying the NEWCLIENT boost to strictly fresh
clients (that do not wait upon anything else) should maintain the
"real-time response under load" characteristics of FQ_CODEL, without
locking together the long chains of dependencies across the system.
References: b16c765122 ("drm/i915: Priority boost for new clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204150101.30759-1-chris@chris-wilson.co.uk
When first enabling preemption, we hesitated from making it a free-for-all
where every higher priority client would force a preempt-to-idle cycle
and take over from all lower priority clients. We hesitated because we
were uncertain just how well preemption would work in practice, whether
the preemption latency itself would detract from the latency gains for
higher priority tasks and whether it would work at all. Since
introducing preemption, we have been enabling it for more common tasks,
even giving normal clients a small preemptive boost when they first
start (to aide fairness and improve interactivity). Now lets take one
step further and give permission for all normal (priority:0) clients to
preempt any idle (priority:<0) task so that users running long compute
jobs do not overly impact other jobs (i.e. their desktop) and the system
remains responsive under such idle loads.
References: f6322eddaf ("drm/i915/preemption: Allow preemption between submission ports")
References: b16c765122 ("drm/i915: Priority boost for new clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: "Bloomfield, Jon" <jon.bloomfield@intel.com>
Cc: "Stead, Alan" <alan.stead@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204084116.3013-1-chris@chris-wilson.co.uk
In order to enable the MMIO path stream ID protection provided by the
incarnation of host1x found in Tegra186 and later, the host1x must be
provided with the list of stream ID register offsets for each of its
clients. Some clients (such as VIC) have multiple stream ID registers
that are assumed to be contiguous. The host1x is programmed with the
base offset and a limit which provide the range of registers that the
host1x needs to monitor for writes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This new debugfs file represents the state of host1x bus devices,
specifying the list of subdevices and marking which ones have
successfully registered.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In this usage, the two are completely equivalent, but the completion
documents better what is going on, and we generally try to avoid
semaphores these days.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When GEM backing storage is allocated those are normal pages,
so there is no point using pgprot_writecombine while mmaping.
This fixes mismatch of buffer pages' memory attributes between
the frontend and backend which may cause screen artifacts.
Fixes: c575b7eeb8 ("drm/xen-front: Add support for Xen PV display frontend")
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129150422.19867-1-andr2000@gmail.com
There is no need to have the 'struct drm_framebuffer *fb' variable
static since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1548504338-114487-1-git-send-email-yuehaibing@huawei.com
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcVVKOAAoJEPpiX2QO6xPKzpEH/11faCaucfkejXnR2ff3H/Rc
EQILDB+SFwzKYaxd8pLHXJ7D8stmBGW4i086bic1JFTxIi/MtQv5rfOO87jqu1DU
3FFgCLuovzmheKVMuPxnSwGXn2ZI3RWPoDrH7OGaOtKuNAfoFTL9upZYsmBOyA+8
srraU1zHhhR3pawqqVpGrXCVToKSYQc/mh9Od1v491yoqMEhC6r2JaGiePZQldn9
J99ouBDOHMM1f45UX4+ORNQB951sQhJ4SW8e2bi2jKuc5WNmX3+tGLYdKemq3OYN
vi3a4xwSPkhbGWUSQtT7Cy6e2p43p/k7CwVl1iEESVB7HOqINwmxY/UIxm3ap1s=
=Q8JK
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Make background color and LUT more robust (Matt)
- Icelake display fixes (Ville, Imre)
- Workarounds fixes and reorg (Tvrtko, Talha)
- Enable fastboot by default on VLV and CHV (Hans)
- Add another PCI ID for Coffee Lake (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202082911.GA6615@intel.com
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXFRb/wAKCRDj7w1vZxhR
xXj2AQDFAkH0/tksJ+T6yrHZXQE7q/6fAWTlrDXLo7Nb1hhfswEA1AyaHmZJA0Ar
u7S+4Gfzs/gisw9Jr4bqQaerEpYJxQA=
=qumD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-02-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201144749.t3abxvguhstu6bcl@flea
When the vblank irq happens, kernel time subsystem executes
`vkms_vblank_simulate`. In parallel or not, it prepares all stuff
necessary to the next vblank with arm, and it must flush these stuff
before the next vblank irq. However, vblank counter is ahead when arm is
executed in parallel with handle vblank.
CPU 0: CPU 1:
| |
atomic_commit_tail is ongoing |
| |
| hrtimer: vkms_vblank_simulate()
| |
| drm_crtc_handle_vblank()
| |
drm_crtc_arm_vblank() |
| |
->get_vblank_timestamp() |
| |
| hrtimer_forward_now()
Then, we should guarantee that the vblank interval time is correct (not
changed) before finish the vblank handle.
Fix the bug including the call to `hrtimer_forward_now()` in the same
lock of `drm_crtc_handle_vblank()` to ensure that the timestamp update
is correct when finish the vblank handle.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e2e4b8f3a5cab7b2dba75bf1930f86b0a4ee08c9.1548856186.git.shayenneluzmoura@gmail.com
kms_flip tests are breaking on vkms when simulate vblank because vblank
event sequence count returns one extra frame after arm vblank event to
make a page flip.
When vblank interrupt happens, userspace processes the vblank event and
issues the next page flip command. Kernel calls queue_work to call
commit_planes and arm the new page flip. The next vblank picks up the
newly armed vblank event and vblank interrupt happens again.
The arm and vblank event are asynchronous, then, on the next vblank, we
receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp
and vblank seqno matches.
Function `get_vblank_timestamp` is reached by 2 ways:
- from `drm_mode_page_flip_ioctl`: driver is doing one atomic
operation to synchronize planes in the same output. There is no
vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1
on vblank count, and the variable in_vblank_irq is false
- from `vkms_vblank_simulate`: since the driver is doing a vblank
simulation, the variable in_vblank_irq is true.
Fix this problem subtracting one vblank period from vblank_time when
`get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`,
i.e., is not a real vblank interrupt, and getting the timestamp and
vblank seqno when it is a real vblank interrupt.
The reason for all this is that get_vblank_timestamp always supplies the
timestamp for the next vblank event. The hrtimer is the vblank
simulator, and it needs the correct previous value to present the next
vblank. Since this is how hw timestamp registers work and what the
vblank core expects.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/171e6e1c239cbca0c3df7183ed8acdfeeace9cf4.1548856186.git.shayenneluzmoura@gmail.com
Colin Ian King