Modify the CS counter of a CB to be atomic, so no locking is required
when it is being modified or read.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
hl_cs_sanity_checks() extracts the CS type bits of the CS flags, by
masking out the non-type bits.
To save the need for updating the function whenever new bits for
non-type flags are added, add an explicit mask for the CS type bits.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some messages should be changed to debug mode as we want to keep
minimal prints during normal operation of the device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If huge range is not valid, driver uses the host range also for
huge page allocations, but driver never frees its allocation.
This introduces a memory leak every time a user closes its context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently, if the f/w is in preboot/u-boot they don't perform the new
reset mechanism. Therefore, the driver needs to reset the device.
To prevent reset of PCI_IF, the driver needs to first configure the
reset units.
If the security is enabled, the driver can't configure the reset units.
In that situation, don't reset the card.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
These defines are 64-bit defines so they need ull suffix.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
add support for user to request a timestamp upon
cs completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We want to indicate to the user that a certain command submission
is finished long time ago and it is no longer in database.
This means no further information regarding this cs can be obtained.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have the ECC type field from the firmware but the driver didn't
print it, so we need to add that field to the ECC print message.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Make a function in gaudi.c to be static
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once firmware security is enabled, driver must fetch pll frequencies
through the firmware message interface instead of reading the registers
directly.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We introduce a new wrapper which allows us to mmu map any size
to any host va_range available. In addition we remove duplicated
code from various places in driver and using this new wrapper
instead.
This wrapper supports mapping only contiguous physical
memory blocks and will be used for mappings that are done to the
driver ASID.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have several types of command submissions and the user wants to know
which type of command submission has not finished in time when that
event occurs. This is very helpful for debug.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As part of the security effort in which FW will be handling
sensitive HW registers, hard reset flow will be done by FW
and will be triggered by driver.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W message returns 64bit value but up until now we casted it to
a 32bit variable, instead of receiving 64bit in the first place.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
After the MMU-code refactoring, the existing MMU debugfs operations
are no longer working so we need to fix them.
In addition, remove the duplicate code that was in the debugfs code
and use the already existing MMU-code.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Multiple locks are usually a source of problems, which in the MMU
case can be avoided since it is relatively rare that both MMU
tables are updated at the same time.
Therefore, use a single shared lock instead of two separate ones.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for reserving va block with alignment different than
page size. This is a pre-requisite for allocations needed in future
ASICs
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add log prints for security and eFuse boot error bits
Signed-off-by: Guy Nisan <gnisan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During hard-reset, the driver rejects further IOCTL calls and prints
an error message. That error message should be printed with the correct
device instead of using only the control device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW security is enabled there is no access to HBM ecc registers,
need to read values from FW using a dedicated interface.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must fetch FW hard reset capability during boot time,
in order to skip the hard reset flow if necessary.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Whether an ASIC has MMU towards its DRAM is an ASIC property, so
move it to the asic fixed properties structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of using a dedicated va range for each internal pool,
we introduce a new way for reserving a va block from an existing
va range. This is a more generic way of reserving va blocks for
future use.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We want to handle the scenario in which the driver was not able
to kill all user processes due to many memory mappings.
We need to retry again after some period while releasing the cores.
The devices will be unusable and "in-reset" status during that time.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Future command submission types might be submitted to HW not via the
QMAN queues path. However, it would be still required to have the TDR
mechanism for these CS, and thus the patch renames the TDR fields and
replaces the hw_queues_ prefix with cs_.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Use an array of va_ranges instead of keeping each va_range separately,
we do this for better readability and in order to support access to
a specific range in a much elegant manner.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver must verify if HW is dirty before trying to fetch preboot
information. Hence, we move this validation to a prior stage of
the boot sequence.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to using dma_mmap_coherent() to perform mmap of dma memory, we
had to clear the vm_pgoff field before calling that function.
However, that broke the userspace (profiler tool) as they relied
on searching the /proc/self/maps for these values to correctly
"disassemble" the topology recipe.
To re-enable that functionality, the driver can simply restore the
value of vm_pgoff before returning to userspace but after calling
dma_mmap_coherent().
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The new state indicates that device should be reset in order
to re-gain funcionality.
This unique state can occur if reset_on_lockup is disabled
and an actual lockup has occurred.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
One of the first steps of a hard reset flow is to close all open user
contexts. This user process teradown might take some time due to long
cleanup in our driver or some other reason even before our cleanup flow.
Hence fix the relevant print and comment to be more accurate.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Since the very large grace period is over and this functionality
prevents us to implement the new reset sequence and apply security
settings, we need to remove the code toggling the PCIE_EN bit in the
straps register.
Remove it for good.
Signed-off-by: Igor Grinberg <igrinberg@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We print twice the firmware status regarding security, once in
common code and once in asic code. Remove the print in asic code
and leave the common code print.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current CS jobs are no longer needed after their completion.
However, jobs of future workload might be in use even after they are
completed. To allow that, the patch adds a refcount to the job object,
and decouples its completion handling from its deallocation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We need to have the MAX CS be much larger than the size of the
different queues. In GAUDI we have around 8 groups of queues, and each
group has 1K queue size. To prevent head-of-the-line blocking, we need
to make sure there is sufficient number of available CS allocations
even if one or more of those queues are full.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
failure in reading pre-boot verion is not handled correctly,
upon failure we need to reset the device in order to be able
to reinstall the driver.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Several header files are repeatedly included in many files.
Move these files to habanalabs.h which is included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As in standard wait cs, we must release a signal fence once
a collective wait cs was dropped and not submitted.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are no internal queues if H/W queues are being used.
In this case we can skip the redundant traversal over the queues array,
looking for internal queues.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Slightly refactor the cs_do_release() function, to reduce nesting level
and to ease the handling of future CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Refactor the CS IOCTL handling by gathering common code into
sub-functions, in order to ease future additions of new CS types.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once FW security is enabled there is no access to PLL registers,
need to read values from FW using a dedicated interface.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This commit refactors the MMU code to support PCI MMU page tables
residing on host and DCORE MMU residing on the device DRAM at the
same time.
This is needed for future devices as on GAUDI and GOYA we have
a single MMU where its page tables always reside on DRAM.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In cases of multi-tenants, administrators may want to prevent data
leakage between users running on the same device one after another.
To do that the driver can scrub the internal memory (both SRAM and
DRAM) after a user finish to use the memory.
Because in GAUDI the driver allows only one application to use the
device at a time, it can scrub the memory when user app close FD.
In future devices where we have MMU on the DRAM, we can scrub the DRAM
memory with a finer granularity (page granularity) when the user
allocates the memory.
This feature is not supported in Goya.
To allow users that want to debug their applications, we add a kernel
module parameter to load the driver with this feature disabled.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Skip relevant HW configurations once FW security is enabled
because these configurations are being performed by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add support for fetching security indication from FW.
This indication is needed in order to skip unnecessary
initializations done by FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Today driver is able to load a whole FW binary into a specific
location on ASIC. We add support for loading sections from the
same FW binary into different loactions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Although we get a valid cs type from the callee, in case new values
will be added in the future, it is best to check the expected values
in that function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In GAUDI we don't have an MMU towards the HBM device memory. Therefore,
the user access that memory directly through physical address (via the
different engines) without the need to go through the driver to
allocate/free memory on the HBM.
For system monitoring purposes, the driver will keep track of the HBM
usage. This can be done as long as the user accurately reports the
allocations and releases of HBM memory, through the existing MEMORY
IOCTL uapi.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.
Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.
Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initialize the QMANs that are responsible to submit doorbells to the NIC
engines. Add support for stopping and disabling them, and reset them as
part of the hard-reset procedure of GAUDI. This will allow the user to
submit work to the NICs.
Add support for receiving events on QMAN errors from the firmware.
However, the nic_ports_mask is still initialized to 0. That means this code
won't initialize the QMANs just yet. That will be in a later patch.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Configure the security properties of the NIC IP. This is to prevent the
user process from doing something with the NIC that he shouldn't do. e.g.
crash the server, steal data, etc.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add new structures and messages that the driver use to interact with the
firmware to receive information and events (errors) about GAUDI's NIC.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add auto-generated header files that describe the NIC QMANs registers
used by the driver.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We already check if queue index is smaller than max queues a few lines
above this check so no need to check this again.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Support advanced monitor functionality to monitor more than a
single SOB. In addition expand all CB generation functions
with buffer offset in order to put in them multiple packets that are
generated by different functions.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we are running without MMU enabled (debug mode), no need to
initialize the VM module in the driver.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
No need to print when the driver starts to initialize the H/W. Drivers
should be silent when everything is OK.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The driver now loads the firmware in two stages. For debugging purposes
we need to support situations where only the first stage firmware is
loaded.
Therefore, use a bitmask to determine which F/W is loaded
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
F/W can be loaded but device CPU queues disabled. In that case, HWMON
should be disabled. This is only relevant when debugging
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case we will have multiple contexts/processes, we can't just
increment aggregated counters. We need to make them atomic as they can
be incremented by multiple processes
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Driver never puts its device and control_device objects, hence
a memory leak is introduced every driver removal.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If huge range is not valid, driver uses the host range also for
huge page allocations, but driver never frees its allocation.
This introduces a memory leak every time a user closes its context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There is missing statement and missing "break;" in the ECC handling
code in gaudi.c
This will cause a wrong behavior upon certain ECC interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This patch fix clock timing for RTS5261, using 256 divide
for the version higher than version C.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397321-3026-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch check mmc support when RTS5261 initialize,
and not support mmc default.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397298-2921-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch fix the bug that when there is over current but
reader can't enable OCP.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397278-2815-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch add test mode for RTS5261.
If test mode is set, reader will switch to SD Express mode
mandatorily, and this mode is used by factory testing only.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1604397269-2780-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RTS5261 support SD mode and PCIe/NVMe mode. The workflow is as follows.
1.RTS5261 work in SD mode and set MMC_CAPS2_SD_EXP flag.
2.If card is plugged in, Host send CMD8 to ask card's PCIe availability.
3.If the card has PCIe availability and WP is not set, init_sd_express() will be invoked,
RTS5261 switch to PCIe/NVMe mode.
4.Mmc driver handover it to NVMe driver.
5.If card is unplugged, RTS5261 will switch to SD mode.
Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/1603936668-3363-1-git-send-email-rui_feng@realsil.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To save the interested reader some time, add examples of AT25 part
numbers that correspond to EEPROMs rather than flashes.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201107133337.1066271-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The spelling of "Hisilicon" is modified.
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Link: https://lore.kernel.org/r/1604309965-21752-3-git-send-email-yekai13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This interrupt cause is not relevant because of how the user use the
QMAN arbitration mechanism. We must mask it as the log explodes with it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We must relocate the coresight mmu configuration to the coresight
flow to make it work in case the first submission is to configure
the profiler.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
All throughout the driver, normal kernel pointers are
stored as 'u64' struct members, which is kind of silly
and requires casting through a uintptr_t to void* every
time they are used.
There is one line that missed the intermediate uintptr_t
case, which leads to a compiler warning:
drivers/misc/habanalabs/common/command_buffer.c: In function 'hl_cb_mmap':
drivers/misc/habanalabs/common/command_buffer.c:512:44: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
512 | rc = hdev->asic_funcs->cb_mmap(hdev, vma, (void *) cb->kernel_address,
Rather than adding one more cast, just fix the type and
remove all the other casts.
Fixes: 0db575350c ("habanalabs: make use of dma_mmap_coherent")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
A receive callback is queued while the client is still connected
but can still be called after the client was disconnected. Upon
disconnect cl->me_cl is set to NULL, hence we need to check
that ME client is not-NULL in mei_cl_mtu to avoid
null dereference.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the initialization procedure for receive or receive callback
registration on the client bus has failed the caller can't re-run it.
Deinitilize the callback pointers and cancel the work
to allow the caller to retry.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid queuing reads and registering rx callbacks in
case the client is not connected, to prevent null
dereferencing and memory leaks.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20201029095444.957924-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/misc/ocxl/config.c:81: warning: Function parameter or member 'dev' not described in 'get_function_0'
drivers/misc/ocxl/config.c:81: warning: Excess function parameter 'device' description in 'get_function_0'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201102142001.560490-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomer Tayar