This patch adds support to the Cadence PCIe controller in endpoint mode.
Since pieces of source code are shared with the host driver (Root
Complex mode), we create a new directory under drivers/pci dedicated to
the Cadence PCIe controller. The common code is placed into
drivers/pci/cadence/pcie-cadence.c and used by both the host and
endpoint controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patch adds support to the Cadence PCIe controller in host mode.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
As I have neither too much time nor access to the architecture
documentation anymore, let's switch my status from maintainer to
reviewer. Janosch will step in as second maintainer.
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
- Security mitigations:
- variant 2: invalidating the branch predictor with a call to secure firmware
- variant 3: implementing KPTI for arm64
- 52-bit physical address support for arm64 (ARMv8.2)
- arm64 support for RAS (firmware first only) and SDEI (software
delegated exception interface; allows firmware to inject a RAS error
into the OS)
- Perf support for the ARM DynamIQ Shared Unit PMU
- CPUID and HWCAP bits updated for new floating point multiplication
instructions in ARMv8.4
- Removing some virtual memory layout printks during boot
- Fix initial page table creation to cope with larger than 32M kernel
images when 16K pages are enabled
-----BEGIN PGP SIGNATURE-----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=iEjP
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The main theme of this pull request is security covering variants 2
and 3 for arm64. I expect to send additional patches next week
covering an improved firmware interface (requires firmware changes)
for variant 2 and way for KPTI to be disabled on unaffected CPUs
(Cavium's ThunderX doesn't work properly with KPTI enabled because of
a hardware erratum).
Summary:
- Security mitigations:
- variant 2: invalidate the branch predictor with a call to
secure firmware
- variant 3: implement KPTI for arm64
- 52-bit physical address support for arm64 (ARMv8.2)
- arm64 support for RAS (firmware first only) and SDEI (software
delegated exception interface; allows firmware to inject a RAS
error into the OS)
- perf support for the ARM DynamIQ Shared Unit PMU
- CPUID and HWCAP bits updated for new floating point multiplication
instructions in ARMv8.4
- remove some virtual memory layout printks during boot
- fix initial page table creation to cope with larger than 32M kernel
images when 16K pages are enabled"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits)
arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm
arm64: Turn on KPTI only on CPUs that need it
arm64: Branch predictor hardening for Cavium ThunderX2
arm64: Run enable method for errata work arounds on late CPUs
arm64: Move BP hardening to check_and_switch_context
arm64: mm: ignore memory above supported physical address size
arm64: kpti: Fix the interaction between ASID switching and software PAN
KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA
KVM: arm64: Handle RAS SErrors from EL2 on guest exit
KVM: arm64: Handle RAS SErrors from EL1 on guest exit
KVM: arm64: Save ESR_EL2 on guest SError
KVM: arm64: Save/Restore guest DISR_EL1
KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2.
KVM: arm/arm64: mask/unmask daif around VHE guests
arm64: kernel: Prepare for a DISR user
arm64: Unconditionally enable IESB on exception entry/return for firmware-first
arm64: kernel: Survive corrected RAS errors notified by SError
arm64: cpufeature: Detect CPU RAS Extentions
arm64: sysreg: Move to use definitions for all the SCTLR bits
arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
...
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Clean up the x86 instruction decoder (Masami Hiramatsu)
- Add new uprobes optimization for PUSH instructions on x86 (Yonghong
Song)
- Add MSR_IA32_THERM_STATUS to the MSR events (Stephane Eranian)
- Fix misc bugs, update documentation, plus various cleanups (Jiri
Olsa)
There's a large number of tooling side improvements:
- Intel-PT/BTS improvements (Adrian Hunter)
- Numerous 'perf trace' improvements (Arnaldo Carvalho de Melo)
- Introduce an errno code to string facility (Hendrik Brueckner)
- Various build system improvements (Jiri Olsa)
- Add support for CoreSight trace decoding by making the perf tools
use the external openCSD (Mathieu Poirier, Tor Jeremiassen)
- Add ARM Statistical Profiling Extensions (SPE) support (Kim
Phillips)
- libtraceevent updates (Steven Rostedt)
- Intel vendor event JSON updates (Andi Kleen)
- Introduce 'perf report --mmaps' and 'perf report --tasks' to show
info present in 'perf.data' (Jiri Olsa, Arnaldo Carvalho de Melo)
- Add infrastructure to record first and last sample time to the
perf.data file header, so that when processing all samples in a
'perf record' session, such as when doing build-id processing, or
when specifically requesting that that info be recorded, use that
in 'perf report --time', that also got support for percent slices
in addition to absolute ones.
I.e. now it is possible to ask for the samples in the 10%-20% time
slice of a perf.data file (Jin Yao)
- Allow system wide 'perf stat --per-thread', sorting the result (Jin
Yao)
E.g.:
[root@jouet ~]# perf stat --per-thread --metrics IPC
^C
Performance counter stats for 'system wide':
make-22229 23,012,094,032 inst_retired.any # 0.8 IPC
cc1-22419 692,027,497 inst_retired.any # 0.8 IPC
gcc-22418 328,231,855 inst_retired.any # 0.9 IPC
cc1-22509 220,853,647 inst_retired.any # 0.8 IPC
gcc-22486 199,874,810 inst_retired.any # 1.0 IPC
as-22466 177,896,365 inst_retired.any # 0.9 IPC
cc1-22465 150,732,374 inst_retired.any # 0.8 IPC
gcc-22508 112,555,593 inst_retired.any # 0.9 IPC
cc1-22487 108,964,079 inst_retired.any # 0.7 IPC
qemu-system-x86-2697 21,330,550 inst_retired.any # 0.3 IPC
systemd-journal-551 20,642,951 inst_retired.any # 0.4 IPC
docker-containe-17651 9,552,892 inst_retired.any # 0.5 IPC
dockerd-current-9809 7,528,586 inst_retired.any # 0.5 IPC
make-22153 12,504,194,380 inst_retired.any # 0.8 IPC
python2-22429 12,081,290,954 inst_retired.any # 0.8 IPC
<SNIP>
python2-22429 15,026,328,103 cpu_clk_unhalted.thread
cc1-22419 826,660,193 cpu_clk_unhalted.thread
gcc-22418 365,321,295 cpu_clk_unhalted.thread
cc1-22509 279,169,362 cpu_clk_unhalted.thread
gcc-22486 210,156,950 cpu_clk_unhalted.thread
<SNIP>
5.638075538 seconds time elapsed
[root@jouet ~]#
- Improve shell auto-completion of perf events (Jin Yao)
- 'perf probe' improvements (Masami Hiramatsu)
- Improve PMU infrastructure to support amp64's ThunderX2
implementation defined core events (Ganapatrao Kulkarni)
- Various annotation related improvements and fixes (Thomas Richter)
- Clarify usage of 'overwrite' and 'backward' in the evlist/mmap
code, removing the 'overwrite' parameter from several functions as
it was always used it as 'false' (Wang Nan)
- Fix/improve 'perf record' reverse recording support (Wang Nan)
- Improve command line options documentation (Sihyeon Jang)
- Optimize sample parsing for ordering events, where we don't need to
parse all the PERF_SAMPLE_ bits, just the ones leading to the
timestamp needed to reorder events (Jiri Olsa)
- Generalize the annotation code to support other source information
besides objdump/DWARF obtained ones, starting with python scripts,
that will is slated to be merged soon (Jiri Olsa)
- ... and a lot more that I failed to list, see the shortlog and
changelog for details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (262 commits)
perf trace beauty flock: Move to separate object file
perf evlist: Remove fcntl.h from evlist.h
perf trace beauty futex: Beautify FUTEX_BITSET_MATCH_ANY
perf trace: Do not print from time delta for interrupted syscall lines
perf trace: Add --print-sample
perf bpf: Remove misplaced __maybe_unused attribute
MAINTAINERS: Adding entry for CoreSight trace decoding
perf tools: Add mechanic to synthesise CoreSight trace packets
perf tools: Add full support for CoreSight trace decoding
pert tools: Add queue management functionality
perf tools: Add functionality to communicate with the openCSD decoder
perf tools: Add support for decoding CoreSight trace data
perf tools: Add decoder mechanic to support dumping trace data
perf tools: Add processing of coresight metadata
perf tools: Add initial entry point for decoder CoreSight traces
perf tools: Integrating the CoreSight decoding library
perf vendor events intel: Update IvyTown files to V20
perf vendor events intel: Update IvyBridge files to V20
perf vendor events intel: Update BroadwellDE events to V7
perf vendor events intel: Update SkylakeX events to V1.06
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
=sOml
-----END PGP SIGNATURE-----
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull irq updates from Thomas Gleixner:
"A rather small set of irq updates this time:
- removal of the old and now obsolete irq domain debugging code
- the new Goldfish PIC driver
- the usual pile of small fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG
irq/work: Improve the flag definitions
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
irqchip/irq-goldfish-pic: Add Goldfish PIC driver
dt-bindings/goldfish-pic: Add device tree binding for Goldfish PIC driver
irqchip/ompic: fix return value check in ompic_of_init()
dt-bindings/bcm283x: Define polarity of per-cpu interrupts
irqchip/irq-bcm2836: Add support for DT interrupt polarity
dt-bindings/bcm2836-l1-intc: Add interrupt polarity support
- First part of an overhaul of the NuBus subsystem, to bring it up to
modern driver model standards,
- A race condition fix for Mac,
- Defconfig updates.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PZNx
-----END PGP SIGNATURE-----
Merge tag 'm68k-for-v4.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- first part of an overhaul of the NuBus subsystem, to bring it up to
modern driver model standards
- a race condition fix for Mac
- defconfig updates
* tag 'm68k-for-v4.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
MAINTAINERS: Add NuBus subsystem entry
m68k/mac: Fix race conditions in OSS interrupt dispatch
nubus: Add support for the driver model
nubus: Add expansion_type values for various Mac models
nubus: Adopt standard linked list implementation
nubus: Rename struct nubus_dev
nubus: Rework /proc/bus/nubus/s/ implementation
nubus: Generalize block resource handling
nubus: Clean up whitespace
nubus: Remove redundant code
nubus: Call proc_mkdir() not more than once per slot directory
nubus: Validate slot resource IDs
nubus: Fix log spam
nubus: Use static functions where possible
nubus: Fix up header split
nubus: Avoid array underflow and overflow
m68k/defconfig: Update defconfigs for v4.15-rc1
* small cleanups
-----BEGIN PGP SIGNATURE-----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=zZjH
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- new EDAC driver for some TI SOCs (Tero Kristo)
- small cleanups
* tag 'edac_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, mv64x60: Fix an error handling path
EDAC, ti: Add support for TI keystone and DRA7xx EDAC
EDAC, octeon: Fix an uninitialized variable warning
This is a quiet release in terms of code volume but a fairly big one in
terms of framework changes - we've got one long awaited feature in the
form of runtime configuration of suspend and the start of coupled
regulator support too:
- Support for modifying the voltage and enable configuration devices
will have in suspend, contributed by Chunyan Zhang.
- Support for the Spreadtrum SC2731, contributed by Erick Chen.
- The start of changes to support coupled regulators from Maciej
Purski, the rest of the series should arrive for v4.17.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlpvHYcTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0HzDB/sGUx2duXDCJaJjTdM2qFUldC6rU1Cf
kiXAuAvphsxo0ZBgzzkgRogEfUwrWLXcXWjEdTInoUeTc6j5O8AU/39xrnK4qWHx
O3NsX1JlEw0G7NCovocJfC8juok2D9VoSrYFCiDBx0jUxdhc7P4rlYtr1IovicfC
LJPAHniW1DREnZrXRL+ivtgN9+nlJlTFtChgppDjsenSJYX4fF7l37ynNIrTJ9wp
7jchZGPsN62JVCjIqRlkJzrkPfxBaRLqLs7mceI0HTbdWFH0CqKHxC7RsbPisj48
MB8Li2/WBX+x7TLdewTZfMZ65hsCAITDysQ3jAbBoS7864jddEzomsTU
=SPQ9
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a quiet release in terms of code volume but a fairly big one
in terms of framework changes - we've got one long awaited feature in
the form of runtime configuration of suspend and the start of coupled
regulator support too:
- Support for modifying the voltage and enable configuration devices
will have in suspend, contributed by Chunyan Zhang.
- Support for the Spreadtrum SC2731, contributed by Erick Chen.
- The start of changes to support coupled regulators from Maciej
Purski, the rest of the series should arrive for v4.17"
* tag 'regulator-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix build error
regulator: core: Refactor regulator_list_voltage()
regulator: core: Move of_find_regulator_by_node() to of_regulator.c
regulator: add PM suspend and resume hooks
regulator: empty the old suspend functions
regulator: leave one item to record whether regulator is enabled
regulator: make regulator voltage be an array to support more states
regulator: added support for suspend states
regulator: qcom_spmi: Use regmap helpers for enable/disable/is_enabled callback
regulator: sc2731: Fix defines for SC2731_WR_UNLOCK and SC2731_PWR_WR_PROT_VALUE
regulator: fix incorrect indentation of two assignment statements
regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC
regulator: Add Spreadtrum SC2731 regulator documentation
regulator: Update code examples in documentation
MAINTAINERS: regulator: Add Documentation/power/regulator/
regulator: tps65218: Add NULL test for devm_kzalloc call
regulator: tps65218: Remove unused enum tps65218_regulators
Core changes:
* Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
* Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
Driver changes:
* CFI: use macros instead of inline functions to limit stack
usage and make KASAN happy
NAND changes:
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
SPI NOR changes:
Core changes:
* Add support to new ISSI and Cypress/Spansion memory parts.
* Fix support of Micron memories by checking error bits in the FSR.
* Fix update of block-protection bits by reading back the SR.
* Restore the internal state of the SPI flash memory when removing the
device.
Driver changes:
* Maintenance for Freescale, Intel and Metiatek drivers.
* Add support of the direct access mode for the Cadence QSPI controller.
-----BEGIN PGP SIGNATURE-----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=Mxo2
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"MTD core changes:
- Rework core functions to avoid duplicating generic checks in
NAND/OneNAND sub-layers
- Update the MAINTAINERS entry to reflect the fact that MTD
maintainers now use a single git tree
MTD driver changes:
- CFI: use macros instead of inline functions to limit stack usage
and make KASAN happy
NAND core changes:
- Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
- Introduce the ->exec_op() infrastructure
- Rework NAND buffers handling
- Fix ECC requirements for K9F4G08U0D
- Fix nand_do_read_oob() to return the number of bitflips
- Mark K9F1G08U0E as not supporting subpage writes
NAND driver changes:
- MTK: Rework the driver to support new IP versions
- OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and
fix DT support
- Marvell: Add a new driver to replace the pxa3xx one
SPI NOR core changes:
- Add support to new ISSI and Cypress/Spansion memory parts.
- Fix support of Micron memories by checking error bits in the FSR.
- Fix update of block-protection bits by reading back the SR.
- Restore the internal state of the SPI flash memory when removing
the device.
SPI NOR driver changes:
- Maintenance for Freescale, Intel and Metiatek drivers.
- Add support of the direct access mode for the Cadence QSPI
controller"
* tag 'mtd/for-4.16' of git://git.infradead.org/linux-mtd: (93 commits)
mtd: nand: sunxi: Fix ECC strength choice
mtd: nand: gpmi: Fix subpage reads
mtd: nand: Fix build issues due to an anonymous union
mtd: nand: marvell: Fix missing memory allocation modifier
mtd: nand: marvell: remove redundant variable 'oob_len'
mtd: nand: marvell: fix spelling mistake: "suceed"-> "succeed"
mtd: onenand: omap2: Remove redundant dev_err call in omap2_onenand_probe()
mtd: Remove duplicate checks on mtd_oob_ops parameter
mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing
mtd: mtdpart: Make ECC stat handling consistent
mtd: onenand: omap2: print resource using %pR format string
mtd: mtk-nor: modify functions' name more generally
mtd: onenand: samsung: remove incorrect __iomem annotation
MAINTAINERS: Add entry for Marvell NAND controller driver
ARM: OMAP2+: Remove gpmc-onenand
mtd: onenand: omap2: Configure driver from DT
mtd: onenand: omap2: Decouple DMA enabling from INT pin availability
mtd: onenand: omap2: Do not make delay for GPIO OMAP3 specific
mtd: onenand: omap2: Convert to use dmaengine for memcpy
mtd: onenand: omap2: Unify OMAP2 and OMAP3 DMA implementation
...
- Update the ACPICA kernel code to upstream revision 20171215 including:
* Support for ACPI 6.0A changes in the NFIT table (Bob Moore).
* Local 64-bit divide in string conversions (Bob Moore).
* Fix for a regression in acpi_evaluate_object_type() (Bob Moore).
* Fixes for memory leaks during package object resolution (Bob Moore).
* Deployment of safe version of strncpy() (Bob Moore).
* Debug and messaging updates (Bob Moore).
* Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob Moore).
* Null pointer dereference avoidance in Op and cleanups (Colin Ian King).
* Fix for memory leak from building prefixed pathname (Erik Schmauss).
* Coding style fixes, disassembler and compiler updates (Hanjun Guo,
Erik Schmauss).
* Additional PPTT flags from ACPI 6.2 (Jeremy Linton).
* Fix for an off-by-one error in acpi_get_timer_duration() (Jung-uk Kim).
* Infinite loop detection timeout and utilities cleanups (Lv Zheng).
* Windows 10 version 1607 and 1703 OSI strings (Mario Limonciello).
- Update ACPICA information in MAINTAINERS to reflect the current
status of ACPICA maintenance and rename a local variable in one
function to match the corresponding upstream code (Rafael Wysocki).
- Clean up ACPI-related initialization on x86 (Andy Shevchenko).
- Add support for Intel Merrifield to the ACPI GPIO code (Andy
Shevchenko).
- Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav).
- Fix the ACPI Generic Event Device (GED) driver to free IRQs on
shutdown and clean up the PCI IRQ Link driver (Sinan Kaya).
- Make the GHES code call into the AER driver on all errors and
clean up the ACPI APEI code (Colin Ian King, Tyler Baicar).
- Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
Kulkarni).
- Add a lid switch blacklist to the ACPI button driver and make it
print extra debug messages on lid events (Hans de Goede).
- Add quirks for Asus GL502VSK and UX305LA to the ACPI battery
driver and clean it up somewhat (Bjørn Mork, Kai-Heng Feng).
- Add device link for CHT SD card dependency on I2C to the ACPI
LPSS (Intel SoCs) driver and make it avoid creating platform
device objects for devices without MMIO resources (Adrian Hunter,
Hans de Goede).
- Fix the ACPI GPE mask kernel command line parameter handling
(Prarit Bhargava).
- Fix the handling of (incorrectly exposed) backlight interfaces
without LCD (Hans de Goede).
- Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/eCQ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The majority of this is an update of the ACPICA kernel code to
upstream revision 20171215 with a cosmetic change and a maintainers
information update on top of it.
The rest is mostly some minor fixes and cleanups in the ACPI drivers
and cleanups to initialization on x86.
Specifics:
- Update the ACPICA kernel code to upstream revision 20171215 including:
* Support for ACPI 6.0A changes in the NFIT table (Bob Moore)
* Local 64-bit divide in string conversions (Bob Moore)
* Fix for a regression in acpi_evaluate_object_type() (Bob Moore)
* Fixes for memory leaks during package object resolution (Bob
Moore)
* Deployment of safe version of strncpy() (Bob Moore)
* Debug and messaging updates (Bob Moore)
* Support for PDTT, SDEV, TPM2 tables in iASL and tools (Bob
Moore)
* Null pointer dereference avoidance in Op and cleanups (Colin Ian
King)
* Fix for memory leak from building prefixed pathname (Erik
Schmauss)
* Coding style fixes, disassembler and compiler updates (Hanjun
Guo, Erik Schmauss)
* Additional PPTT flags from ACPI 6.2 (Jeremy Linton)
* Fix for an off-by-one error in acpi_get_timer_duration()
(Jung-uk Kim)
* Infinite loop detection timeout and utilities cleanups (Lv
Zheng)
* Windows 10 version 1607 and 1703 OSI strings (Mario
Limonciello)
- Update ACPICA information in MAINTAINERS to reflect the current
status of ACPICA maintenance and rename a local variable in one
function to match the corresponding upstream code (Rafael Wysocki)
- Clean up ACPI-related initialization on x86 (Andy Shevchenko)
- Add support for Intel Merrifield to the ACPI GPIO code (Andy
Shevchenko)
- Clean up ACPI PMIC drivers (Andy Shevchenko, Arvind Yadav)
- Fix the ACPI Generic Event Device (GED) driver to free IRQs on
shutdown and clean up the PCI IRQ Link driver (Sinan Kaya)
- Make the GHES code call into the AER driver on all errors and clean
up the ACPI APEI code (Colin Ian King, Tyler Baicar)
- Make the IA64 ACPI NUMA code parse all SRAT entries (Ganapatrao
Kulkarni)
- Add a lid switch blacklist to the ACPI button driver and make it
print extra debug messages on lid events (Hans de Goede)
- Add quirks for Asus GL502VSK and UX305LA to the ACPI battery driver
and clean it up somewhat (Bjørn Mork, Kai-Heng Feng)
- Add device link for CHT SD card dependency on I2C to the ACPI LPSS
(Intel SoCs) driver and make it avoid creating platform device
objects for devices without MMIO resources (Adrian Hunter, Hans de
Goede)
- Fix the ACPI GPE mask kernel command line parameter handling
(Prarit Bhargava)
- Fix the handling of (incorrectly exposed) backlight interfaces
without LCD (Hans de Goede)
- Fix the usage of debugfs_create_*() in the ACPI EC driver (Geert
Uytterhoeven)"
* tag 'acpi-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
ACPI/PCI: pci_link: reduce verbosity when IRQ is enabled
ACPI / LPSS: Do not instiate platform_dev for devs without MMIO resources
ACPI / PMIC: Convert to use builtin_platform_driver() macro
ACPI / x86: boot: Propagate error code in acpi_gsi_to_irq()
ACPICA: Update version to 20171215
ACPICA: trivial style fix, no functional change
ACPICA: Fix a couple memory leaks during package object resolution
ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings
ACPICA: DT compiler: prevent error if optional field at the end of table is not present
ACPICA: Rename a global variable, no functional change
ACPICA: Create and deploy safe version of strncpy
ACPICA: Cleanup the global variables and update comments
ACPICA: Debugger: fix slight indentation issue
ACPICA: Fix a regression in the acpi_evaluate_object_type() interface
ACPICA: Update for a few debug output statements
ACPICA: Debug output, no functional change
ACPI: EC: Fix debugfs_create_*() usage
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
ACPI / x86: boot: Don't setup SCI on HW-reduced platforms
ACPI / x86: boot: Use INVALID_ACPI_IRQ instead of 0 for acpi_sci_override_gsi
...
- Define a PM driver flag allowing drivers to request that their
devices be left in suspend after system-wide transitions to the
working state if possible and add support for it to the PCI bus
type and the ACPI PM domain (Rafael Wysocki).
- Make the PM core carry out optimizations for devices with driver
PM flags set in some cases and make a few drivers set those flags
(Rafael Wysocki).
- Fix and clean up wrapper routines allowing runtime PM device
callbacks to be re-used for system-wide PM, change the generic
power domains (genpd) framework to stop using those routines
incorrectly and fix up a driver depending on that behavior of
genpd (Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
- Fix and clean up the PM core's device wakeup framework and
re-factor system-wide PM core code related to device wakeup
(Rafael Wysocki, Ulf Hansson, Brian Norris).
- Make more x86-based systems use the Low Power Sleep S0 _DSM
interface by default (to fix power button wakeup from
suspend-to-idle on Surface Pro3) and add a kernel command line
switch to tell it to ignore the system sleep blacklist in the
ACPI core (Rafael Wysocki).
- Fix a race condition related to cpufreq governor module removal
and clean up the governor management code in the cpufreq core
(Rafael Wysocki).
- Drop the unused generic code related to the handling of the static
power energy usage model in the CPU cooling thermal driver along
with the corresponding documentation (Viresh Kumar).
- Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh Cheng).
- Add a new operating point to the imx6ul and imx6q cpufreq drivers
and switch the latter to using clk_bulk_get() (Anson Huang, Dong
Aisheng).
- Add support for multiple regulators to the TI cpufreq driver along
with a new DT binding related to that and clean up that driver
somewhat (Dave Gerlach).
- Fix a powernv cpufreq driver regression leading to incorrect CPU
frequency reporting, fix that driver to deal with non-continguous
P-states correctly and clean it up (Gautham Shenoy, Shilpasri Bhat).
- Add support for frequency scaling on Armada 37xx SoCs through the
generic DT cpufreq driver (Gregory CLEMENT).
- Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
- Fix a transition delay setting regression in the longhaul cpufreq
driver (Viresh Kumar).
- Add Skylake X (server) support to the intel_pstate cpufreq driver
and clean up that driver somewhat (Srinivas Pandruvada).
- Clean up the cpufreq statistics collection code (Viresh Kumar).
- Drop cluster terminology and dependency on physical_package_id
from the PSCI driver and drop dependency on arm_big_little from
the SCPI cpufreq driver (Sudeep Holla).
- Add support for system-wide suspend and resume to the RAPL power
capping driver and drop a redundant semicolon from it (Zhen Han,
Luis de Bethencourt).
- Make SPI domain validation (in the SCSI SPI transport driver) and
system-wide suspend mutually exclusive as they rely on the same
underlying mechanism and cannot be carried out at the same time
(Bart Van Assche).
- Fix the computation of the amount of memory to preallocate in the
hibernation core and clean up one function in there (Rainer Fiebig,
Kyungsik Lee).
- Prepare the Operating Performance Points (OPP) framework for being
used with power domains and clean up one function in it (Viresh
Kumar, Wei Yongjun).
- Clean up the generic sysfs interface for device PM (Andy Shevchenko).
- Fix several minor issues in power management frameworks and clean
them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
Sergey Senozhatsky, gaurav jindal).
- Make it easier to disable PM via Kconfig (Mark Brown).
- Clean up the cpupower and intel_pstate_tracer utilities (Doug
Smythies, Laura Abbott).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dnb7
-----END PGP SIGNATURE-----
Merge tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"This includes some infrastructure changes in the PM core, mostly
related to integration between runtime PM and system-wide suspend and
hibernation, plus some driver changes depending on them and fixes for
issues in that area which have become quite apparent recently.
Also included are changes making more x86-based systems use the Low
Power Sleep S0 _DSM interface by default, which turned out to be
necessary to handle power button wakeups from suspend-to-idle on
Surface Pro3.
On the cpufreq front we have fixes and cleanups in the core, some new
hardware support, driver updates and the removal of some unused code
from the CPU cooling thermal driver.
Apart from this, the Operating Performance Points (OPP) framework is
prepared to be used with power domains in the future and there is a
usual bunch of assorted fixes and cleanups.
Specifics:
- Define a PM driver flag allowing drivers to request that their
devices be left in suspend after system-wide transitions to the
working state if possible and add support for it to the PCI bus
type and the ACPI PM domain (Rafael Wysocki).
- Make the PM core carry out optimizations for devices with driver PM
flags set in some cases and make a few drivers set those flags
(Rafael Wysocki).
- Fix and clean up wrapper routines allowing runtime PM device
callbacks to be re-used for system-wide PM, change the generic
power domains (genpd) framework to stop using those routines
incorrectly and fix up a driver depending on that behavior of genpd
(Rafael Wysocki, Ulf Hansson, Geert Uytterhoeven).
- Fix and clean up the PM core's device wakeup framework and
re-factor system-wide PM core code related to device wakeup
(Rafael Wysocki, Ulf Hansson, Brian Norris).
- Make more x86-based systems use the Low Power Sleep S0 _DSM
interface by default (to fix power button wakeup from
suspend-to-idle on Surface Pro3) and add a kernel command line
switch to tell it to ignore the system sleep blacklist in the ACPI
core (Rafael Wysocki).
- Fix a race condition related to cpufreq governor module removal and
clean up the governor management code in the cpufreq core (Rafael
Wysocki).
- Drop the unused generic code related to the handling of the static
power energy usage model in the CPU cooling thermal driver along
with the corresponding documentation (Viresh Kumar).
- Add mt2712 support to the Mediatek cpufreq driver (Andrew-sh
Cheng).
- Add a new operating point to the imx6ul and imx6q cpufreq drivers
and switch the latter to using clk_bulk_get() (Anson Huang, Dong
Aisheng).
- Add support for multiple regulators to the TI cpufreq driver along
with a new DT binding related to that and clean up that driver
somewhat (Dave Gerlach).
- Fix a powernv cpufreq driver regression leading to incorrect CPU
frequency reporting, fix that driver to deal with non-continguous
P-states correctly and clean it up (Gautham Shenoy, Shilpasri
Bhat).
- Add support for frequency scaling on Armada 37xx SoCs through the
generic DT cpufreq driver (Gregory CLEMENT).
- Fix error code paths in the mvebu cpufreq driver (Gregory CLEMENT).
- Fix a transition delay setting regression in the longhaul cpufreq
driver (Viresh Kumar).
- Add Skylake X (server) support to the intel_pstate cpufreq driver
and clean up that driver somewhat (Srinivas Pandruvada).
- Clean up the cpufreq statistics collection code (Viresh Kumar).
- Drop cluster terminology and dependency on physical_package_id from
the PSCI driver and drop dependency on arm_big_little from the SCPI
cpufreq driver (Sudeep Holla).
- Add support for system-wide suspend and resume to the RAPL power
capping driver and drop a redundant semicolon from it (Zhen Han,
Luis de Bethencourt).
- Make SPI domain validation (in the SCSI SPI transport driver) and
system-wide suspend mutually exclusive as they rely on the same
underlying mechanism and cannot be carried out at the same time
(Bart Van Assche).
- Fix the computation of the amount of memory to preallocate in the
hibernation core and clean up one function in there (Rainer Fiebig,
Kyungsik Lee).
- Prepare the Operating Performance Points (OPP) framework for being
used with power domains and clean up one function in it (Viresh
Kumar, Wei Yongjun).
- Clean up the generic sysfs interface for device PM (Andy
Shevchenko).
- Fix several minor issues in power management frameworks and clean
them up a bit (Arvind Yadav, Bjorn Andersson, Geert Uytterhoeven,
Gustavo Silva, Julia Lawall, Luis de Bethencourt, Paul Gortmaker,
Sergey Senozhatsky, gaurav jindal).
- Make it easier to disable PM via Kconfig (Mark Brown).
- Clean up the cpupower and intel_pstate_tracer utilities (Doug
Smythies, Laura Abbott)"
* tag 'pm-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
PCI / PM: Remove spurious semicolon
cpufreq: scpi: remove arm_big_little dependency
drivers: psci: remove cluster terminology and dependency on physical_package_id
powercap: intel_rapl: Fix trailing semicolon
dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
PM / hibernate: Drop unused parameter of enough_swap
PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
PM / runtime: Rework pm_runtime_force_suspend/resume()
PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
cpufreq: intel_pstate: Add Skylake servers support
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
platform/x86: surfacepro3: Support for wakeup from suspend-to-idle
ACPI / PM: Use Low Power S0 Idle on more systems
PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
PM / domains: Don't skip driver's ->suspend|resume_noirq() callbacks
PM / core: Propagate wakeup_path status flag in __device_suspend_late()
PM / core: Re-structure code for clearing the direct_complete flag
powercap: add suspend and resume mechanism for SOC power limit
...
The major changes in the core API side in this cycle are the still
on-going ASoC componentization works. Other than that, only few small
changes such as 20bit PCM format support are found.
Meanwhile the rest majority of changes are for ASoC drivers:
- Large cleanups of some of the TI CODEC drivers
- Continued work on Intel ASoC stuff for new quirks, ACPI GPIO
handling, Kconfigs and lots of cleanups
- Refactoring of the Freescale SSI driver, as preliminary work for the
upcoming changes
- Work on ST DFSDM driver, including the required IIO patches
- New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier
EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and TAS6424
devices
- Removal of dead codes for SN95031 and board drivers
Last but not least, a few HD-audio and USB-audio quirks are included
as usual, too.
-----BEGIN PGP SIGNATURE-----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=vsOf
-----END PGP SIGNATURE-----
Merge tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The major changes in the core API side in this cycle are the still
on-going ASoC componentization works. Other than that, only few small
changes such as 20bit PCM format support are found.
Meanwhile the rest majority of changes are for ASoC drivers:
- Large cleanups of some of the TI CODEC drivers
- Continued work on Intel ASoC stuff for new quirks, ACPI GPIO
handling, Kconfigs and lots of cleanups
- Refactoring of the Freescale SSI driver, as preliminary work for
the upcoming changes
- Work on ST DFSDM driver, including the required IIO patches
- New drivers for Allwinner A83T, Maxim MAX89373, SocioNext UiniPhier
EVEA Tempo Semiconductor TSCS42xx and TI PCM816x, TAS5722 and
TAS6424 devices
- Removal of dead codes for SN95031 and board drivers
Last but not least, a few HD-audio and USB-audio quirks are included
as usual, too"
* tag 'sound-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (303 commits)
ALSA: hda - Reduce the suspend time consumption for ALC256
ASoC: use seq_file to dump the contents of dai_list,platform_list and codec_list
ASoC: soc-core: add missing EXPORT_SYMBOL_GPL() for snd_soc_rtdcom_lookup
IIO: ADC: stm32-dfsdm: remove unused variable again
ASoC: bcm2835: fix hw_params error when device is in prepared state
ASoC: mxs-sgtl5000: Do not print error on probe deferral
ASoC: sgtl5000: Do not print error on probe deferral
ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMON
ALSA: usb-audio: Support changing input on Sound Blaster E1
ASoC: Intel: remove second duplicated assignment to pointer 'res'
ALSA: hda/realtek - update ALC215 depop optimize
ALSA: hda/realtek - Support headset mode for ALC215/ALC285/ALC289
ALSA: pcm: Fix trailing semicolon
ASoC: add Component level .read/.write
ASoC: cx20442: fix regression by adding back .read/.write
ASoC: uda1380: fix regression by adding back .read/.write
ASoC: tlv320dac33: fix regression by adding back .read/.write
ALSA: hda - Use IS_REACHABLE() for dependency on input
IIO: ADC: stm32-dfsdm: fix static check warning
IIO: ADC: stm32-dfsdm: code optimization
...
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
-----BEGIN PGP SIGNATURE-----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=TXIU
-----END PGP SIGNATURE-----
Merge tag 'nand/for-4.16' of git://git.infradead.org/linux-mtd into mtd/next
Pull NAND changes from Boris Brezillon:
"
Core changes:
* Fix NAND_CMD_NONE handling in nand_command[_lp]() hooks
* Introduce the ->exec_op() infrastructure
* Rework NAND buffers handling
* Fix ECC requirements for K9F4G08U0D
* Fix nand_do_read_oob() to return the number of bitflips
* Mark K9F1G08U0E as not supporting subpage writes
Driver changes:
* MTK: Rework the driver to support new IP versions
* OMAP OneNAND: Full rework to use new APIs (libgpio, dmaengine) and fix
DT support
* Marvell: Add a new driver to replace the pxa3xx one
"
I am no longer employed by Dell EMC. For the purposes of NTB driver
development and maintenance, please contact me via my personal email.
Signed-off-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes for 4.15:
- Fix vmapped stack synchronization on systems with 4-level paging
and a large amount of memory caused by a missing 5-level folding
which made the pgd synchronization logic to fail and causing double
faults.
- Add a missing sanity check in the vmalloc_fault() logic on 5-level
paging systems.
- Bring back protection against accessing a freed initrd in the
microcode loader which was lost by a wrong merge conflict
resolution.
- Extend the Broadwell micro code loading sanity check.
- Add a missing ENDPROC annotation in ftrace assembly code which
makes ORC unhappy.
- Prevent loading the AMD power module on !AMD platforms. The load
itself is uncritical, but an unload attempt results in a kernel
crash.
- Update Peter Anvins role in the MAINTAINERS file"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Add one more ENDPROC annotation
x86: Mark hpa as a "Designated Reviewer" for the time being
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
x86/microcode: Fix again accessing initrd after having been freed
x86/microcode/intel: Extend BDW late-loading further with LLC size check
perf/x86/amd/power: Do not load AMD power module on !AMD platforms
Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now. I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.
It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice. This is in fact recognizing the de facto situation
for the past few years.
I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux. This,
however, puts credit where it is due and reflects a change of focus.
This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time. If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sorry to send something essentially as late as possible (Friday after an
rc9), but we managed to get a mailing list for the RISC-V Linux port.
We've been using patches@groups.riscv.org for a while, but that list has
some problems (it's Google Groups and it's shared over all RISC-V
software projects). The new infaread.org list is much better. We just
got it on Wednesday but I used it a bit on Thursday to shake out all the
configuration problems and it appears to be in working order.
When I updated the mailing list I noticed that the MAINTAINERS file was
pointing to our github repo, but now that we have a kernel.org repo I'd
like to point to that instead so I changed that as well. We'll be
centralizing all RISC-V Linux related development here as that seems to
be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given that
it's not a code change I was hoping it'd still be OK. It would be nice
to have the new mailing list and git repo in the release tarballs so
when people start to find bugs they'll get to the right place.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlprU08THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQXWGD/967RCJl2NVTq/THdKs371+tpv+8HG7
hH6ihV8qyCwdiiOR1sYqOklWV9TP/Ci++Y3P27doO4HE7QkUPRy9J4WqvXcKxcvn
0W8vFyJHIEmZjuuJzaNHOk1OxJTaleH0t4uHwaCK9KJQax5S6NcFd5YG9gNn+26s
mxwKVQbI/NYvA5Uzc288paLiBBGHH8Ja83SrWTsYrp3PXSlealRj1WIMKxZXL4cp
Wl9LixD/EY2NPUkYQ7MB63Lc3ym/0r//ij5Lt1+jmZt2fo/8uiuM1pPSFtlVEmYi
8XUPKztwEq8PGUWJPLpSHy6XrfBMH18vRPQ4GCWEwfLlmCd9v5WCq1HdvzdcYMQD
g/eg4eZtn4sv2JM7Mjh7saFLbRD8ej0DMJ4bPA0YoRLjZ9DdUqI8UvIV6UL58BDf
px0HWzcN/xDke32aJ83eg6t3wAipGzcvRIAE++2mBfJgl4cOZGa2eX23bH7b/kPR
gotRiIeV1vXnuNswGzwzLOVHQ4nSgFaT+G6Lb8OdK3WyK5gKBYoWygo36FMK6WkE
qxbJqoylRhnmYAtxklvNN753pXvFcPGWg5yDPdmx3bRbGjdryFXmUqe4dv8/EmjC
a0R061lFvhr5wx2lNNuRrNgQx/AAypsaqwttxmezQHyHQIYvgeG91JXCbEF1TP+Y
Ve57nAXxqHIVGQ==
=zdWp
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V update from Palmer Dabbelt:
"RISC-V: We have a new mailing list and git repo!
Sorry to send something essentially as late as possible (Friday after
an rc9), but we managed to get a mailing list for the RISC-V Linux
port. We've been using patches@groups.riscv.org for a while, but that
list has some problems (it's Google Groups and it's shared over all
RISC-V software projects). The new infaread.org list is much better.
We just got it on Wednesday but I used it a bit on Thursday to shake
out all the configuration problems and it appears to be in working
order.
When I updated the mailing list I noticed that the MAINTAINERS file
was pointing to our github repo, but now that we have a kernel.org
repo I'd like to point to that instead so I changed that as well.
We'll be centralizing all RISC-V Linux related development here as
that seems to be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given
that it's not a code change I was hoping it'd still be OK. It would be
nice to have the new mailing list and git repo in the release tarballs
so when people start to find bugs they'll get to the right place"
* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Update the RISC-V MAINTAINERS file
Now that we're upstream in Linux we've been able to make some
infrastructure changes so our port works a bit more like other ports.
Specifically:
* We now have a mailing list specific to the RISC-V Linux port, hosted
at lists.infreadead.org.
* We now have a kernel.org git tree where work on our port is
coordinated.
This patch changes the RISC-V maintainers entry to reflect these new
bits of infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The kernel documentation is now restructured text. Convert the SocketCAN
documentation and include it in the toplevel kernel documentation.
This patch doesn't do any content change.
All references to can.txt in the code are converted to can.rst.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When Jason Gunthorpe and I became co-maintainers of the rdma tree, we
moved the official git repo location to a name neutral location.
However, that update did not make it here as well. Fix that mistake.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove myself from maintaining the qedr module as my period
of working with Cavium/Q-Logic has come to an end. I've had
a pleasure working with the community, cheers!
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All other discussions related to the dma mapping interfaces are on the
iommu list, so let's make it the official list for swiotlb and the
second list for xen-swiotlb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Adding maintainers for Coresight trace decoding via perf tools.
Signed-off-by: Tor Jeremiassen <tor@ti.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-11-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In recent years, the linux-pcmcia mailing list gained a pretty bad
signal-to-noise ratio. It does not seem worth the hassle to keep it
any longer. Thanks to David for hosting the list for the last couple
of years!
Acked-by: David Woodhouse <dwmw2@infradead.org>
CC: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
We're seeing a raise of automated reports from testing tools and reports
about address leaks that are not really exploitable as-is, many of which
do not represent an immediate risk justifying to work in closed places.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide amendments to the MIPS generic platform framework so that
the new generic-based board Ranchu can be chosen to be built.
The Ranchu board is intended to be used by Android emulator. The name
"Ranchu" originates from Android development community. "Goldfish" and
"Ranchu" are terms used for two generations of virtual boards used by
Android emulator. The name "Ranchu" is a newer one among the two, and
this patch deals with Ranchu. However, for historical reasons, some
devices/drivers still contain the name "Goldfish".
MIPS Ranchu machine includes a number of Goldfish devices. The support
for Virtio devices is also included. Ranchu board supports up to 16
Virtio devices which can be attached using Virtio MMIO Bus. This is
summarized in the following picture:
ABUS
||----MIPS CPU
|| | IRQs
||----Goldfish PIC------------(32)--------
|| | | | | | | | | |
||----Goldfish TTY------ | | | | | | | |
|| | | | | | | | |
||----Goldfish RTC-------- | | | | | | |
|| | | | | | | |
||----Goldfish FB----------- | | | | | |
|| | | | | | |
||----Goldfish Events--------- | | | | |
|| | | | | |
||----Goldfish Audio------------ | | | |
|| | | | |
||----Goldfish Battery------------ | | |
|| | | |
||----Android PIPE------------------ | |
|| | |
||----Virtio MMIO Bus | |
|| | | | | |
|| | | (virtio-block)--------- |
|| (16) | |
|| | (virtio-net)------------------
Device Tree is created on the QEMU side based on the information about
devices IO map and IRQ numbers. Kernel will load this DTB using UHI
boot protocol DTB handover mode.
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18138/
Signed-off-by: James Hogan <jhogan@kernel.org>
It happened several times that some odd fixes either introduced
regressions, or did hack the code instead of addressing a root cause.
Nominate myself to be a designated reviewer for 8250_dw driver.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some final MIPS fixes for 4.15, including important build fixes and a
MAINTAINERS update:
- Add myself as MIPS co-maintainer.
- Fix various all*config build failures (particularly as a result of
switching the default MIPS platform to the "generic" platform).
- Fix GCC7 build failures (duplicate const and questionable calls to
missing __multi3 intrinsic on mips64r6).
- Fix warnings when CPU Idle is enabled (4.14).
- Fix AR7 serial output (since 3.17).
- Fix ralink platform_get_irq error checking (since 3.12).
-----BEGIN PGP SIGNATURE-----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=rHbt
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"Some final MIPS fixes for 4.15, including important build fixes and a
MAINTAINERS update:
- Add myself as MIPS co-maintainer.
- Fix various all*config build failures (particularly as a result of
switching the default MIPS platform to the "generic" platform).
- Fix GCC7 build failures (duplicate const and questionable calls to
missing __multi3 intrinsic on mips64r6).
- Fix warnings when CPU Idle is enabled (4.14).
- Fix AR7 serial output (since 3.17).
- Fix ralink platform_get_irq error checking (since 3.12)"
* tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MAINTAINERS: Add James as MIPS co-maintainer
MIPS: Fix undefined reference to physical_memsize
MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
MIPS: mm: Fix duplicate "const" on insn_table_MM
MIPS: CM: Drop WARN_ON(vp != 0)
MIPS: ralink: Fix platform_get_irq's error checking
MIPS: Fix CPS SMP NS16550 UART defaults
MIPS: BCM47XX Avoid compile error with MIPS allnoconfig
MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILS
MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
MIPS: AR7: ensure the port type's FCR value is used
Final few patches before the merge window, nothing really special.
ath9k
* add MSI support (not enabled by default yet)
rtlwifi
* support A-MSDU in A-MPDU aggregation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaYa7GAAoJEG4XJFUm622bp+IIAJuAvqfr5G1056cmvvpIDF1i
tsiNcmTkYlV33+99t1GXLgXATM5oYLOe4KLgVk+SxG2mCn2ZIun/TUUExM8tebIr
a6U1loiWhvztBHkzSglfIGknFHH6Ib6gZ6ti6cb5PpZE/ey1bsjlNBjvI5k2di5h
2KobJfQPk34e/DgJI49wYO6CwuzuT+rnNaWFzKEUoKm6lwGeUqpukV90gXN1O/qj
Xt2A9xIlUUEXHBfkJIef34+YMs/c9jeXqwoBMZIs8G/tQGeYOMjqbn7kTLW1MpMX
bu+59PCmshGdM/OMJsOZux5tm4DFGWaK/FYkedAJ1i5u4WzBEr1IJfo19es4oJM=
=kFNX
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2018-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.16
Final few patches before the merge window, nothing really special.
ath9k
* add MSI support (not enabled by default yet)
rtlwifi
* support A-MSDU in A-MPDU aggregation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
wil6210 maintainer email and mail list has changed, hence update
its MAINTAINERS entry accordingly.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* acpica: (40 commits)
ACPICA: Update version to 20171215
ACPICA: trivial style fix, no functional change
ACPICA: Fix a couple memory leaks during package object resolution
ACPICA: Recognize the Windows 10 version 1607 and 1703 OSI strings
ACPICA: DT compiler: prevent error if optional field at the end of table is not present
ACPICA: Rename a global variable, no functional change
ACPICA: Create and deploy safe version of strncpy
ACPICA: Cleanup the global variables and update comments
ACPICA: Debugger: fix slight indentation issue
ACPICA: Fix a regression in the acpi_evaluate_object_type() interface
ACPICA: Update for a few debug output statements
ACPICA: Debug output, no functional change
ACPICA: Update information in MAINTAINERS
ACPICA: Rename variable to match upstream
ACPICA: Update version to 20171110
ACPICA: ACPI 6.2: Additional PPTT flags
ACPICA: Update linkage for get mutex name interface
ACPICA: Update mutex error messages, no functional change
ACPICA: Debugger: add "background" command for method execution
ACPICA: Small typo fix, no functional change
...
* pm-cpufreq: (36 commits)
cpufreq: scpi: remove arm_big_little dependency
drivers: psci: remove cluster terminology and dependency on physical_package_id
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
cpufreq: intel_pstate: Add Skylake servers support
cpufreq: intel_pstate: Replace bxt_funcs with core_funcs
cpufreq: imx6q: add 696MHz operating point for i.mx6ul
ARM: dts: imx6ul: add 696MHz operating point
cpufreq: stats: Change return type of cpufreq_stats_update() as void
powernv-cpufreq: Treat pstates as opaque 8-bit values
powernv-cpufreq: Fix pstate_to_idx() to handle non-continguous pstates
powernv-cpufreq: Add helper to extract pstate from PMSR
cpu_cooling: Remove static-power related documentation
cpufreq: imx6q: switch to Use clk_bulk_get() to refine clk operations
PM / OPP: Make local function ti_opp_supply_set_opp() static
PM / OPP: Add ti-opp-supply driver
dt-bindings: opp: Introduce ti-opp-supply bindings
cpufreq: ti-cpufreq: Add support for multiple regulators
cpufreq: ti-cpufreq: Convert to module_platform_driver
cpufreq: Add DVFS support for Armada 37xx
MAINTAINERS: add new entries for Armada 37xx cpufreq driver
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaW+iVAAoJEHm+PkMAQRiGCDsIAJALNpX7odTx/8y+yCSWbpBH
E57iwr4rmnI6tXJY6gqBUWTYnjAcf4b8IsHGCO6q3WIE3l/kt+m3eA21a32mF2Db
/bfPGTOWu5LoOnFqzgH2kiFuC3Y474toxpld2YtkQWYxi5W7SUtIHi/jGgkUprth
g15yPfwYgotJd/gpmPfBDMPlYDYvLlnPYbTG6ZWdMbg39m2RF2m0BdQ6aBFLHvbJ
IN0tjCM6hrLFBP0+6Zn60pevUW9/AFYotZn2ankNTk5QVCQm14rgQIP+Pfoa5WpE
I25r0DbkG2jKJCq+tlgIJjxHKD37GEDMc4T8/5Y8CNNeT9Q8si9EWvznjaAPazw=
=o5gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc8' into drm-next
Linux 4.15-rc8
Daniel requested this for so the intel CI won't fall over on drm-next
so often.
This is legacy code but it might as well have an official maintainer.
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Here are patches which have been accumulating over the holidays and
after the New Year. Business as usual and nothing special really
standing out.
But what's noteworthy here is that Larry Finger is stepping down as
the rtlwifi maintainer. He has been maintaining rtlwifi since it was
applied back in 2010 in commit 0c8173385e ("rtl8192ce: Add new
driver") and it has been no easy role trying to juggle between the
vendor, demanding upstream community and users. So big thank you to
Larry for all his efforts!
ath10k
* more preparation work for wcn3990 support
* add memory dump to firmware coredump files
wil6210
* support scheduled scan
* support 40-bit DMA addresses
qtnfmac
* support MAC address based access control
* support for radar detection and Channel Availibility Check (CAC)
mwifiex
* firmware coredump for usb devices
rtlwifi
* Larry Finger steps down as the maintainer and Ping-Ke Shih becomes
the new maintainer
* add debugfs interfaces to dump register and btcoex status, and also
write registers and h2c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaWd2WAAoJEG4XJFUm622bDnsH/2+Y5MEn31xvv7FGP46dHCNB
wk1SgcQOQdb7taIpZ++tFvhTQOXwrtGMA5iAFLeg9+07tqGIaZQqr58aab7BCQTi
2PgUK9sEdI5LPw3KmhnaqfHMVDKMaYdjcAhLG4FzJqMoDfTuPr56Vnnde3J2A0mj
hhFRarNKBArEvRaWtNypdZQN8HM10v3LJq+HNnK/yep7fW2EuwSwTO2YBqDhrwAD
0gzfV6yi05497uVv6W+5CKRawu7RoYgbFTaEa8rmCViIjf9bK4gPdsW18a/DTNMz
MfvLF2RQZk1k944+a+a983oqZNkq9dEWd0kF0CSFgbO3r/SO7264yc4PHpZKy/s=
=2eQ4
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2018-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.16
Here are patches which have been accumulating over the holidays and
after the New Year. Business as usual and nothing special really
standing out.
But what's noteworthy here is that Larry Finger is stepping down as
the rtlwifi maintainer. He has been maintaining rtlwifi since it was
applied back in 2010 in commit 0c8173385e ("rtl8192ce: Add new
driver") and it has been no easy role trying to juggle between the
vendor, demanding upstream community and users. So big thank you to
Larry for all his efforts!
ath10k
* more preparation work for wcn3990 support
* add memory dump to firmware coredump files
wil6210
* support scheduled scan
* support 40-bit DMA addresses
qtnfmac
* support MAC address based access control
* support for radar detection and Channel Availibility Check (CAC)
mwifiex
* firmware coredump for usb devices
rtlwifi
* Larry Finger steps down as the maintainer and Ping-Ke Shih becomes
the new maintainer
* add debugfs interfaces to dump register and btcoex status, and also
write registers and h2c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's been 20 years since I became a kernel maintainer, so despite how
much I'm loving my new career, this patch elicits deep feelings[0].
I went to 1997 USENIX, my first conference. I remember[1] standing
around with Alan Cox, Linus, Ted Ts'o and David Miller as they wrote
the code for the BKL on a napkin. I listened in awe as this
homeless-looking guy described porting Linux to the Ultrasparc, and
then described how he then proceeded to beat Solaris on *every single*
lmbench microbenchmark.[2]
A lot of it I didn't understand, but I got home knowing that I had to
work with this random bunch of hackers. I had some firewalling hacks
which I turned into ipchains, and sent it to DaveM with a config
option to switch between the old ipfwadm code and my new code. He
liked it so much he replaced ipfwadm entirely, and I woke up one day
as kernel firewall maintainer[3].
I found someone to fund my work the next year, and suddenly I was
doing my dream job full time. I flew myself around Australia visiting
every LUG to convince them to come to the first Australian Linux
conference. And of course, DaveM was top of my list for speakers.
There was so much work to do on the kernel; everywhere you'd look
there was code which could be simplified, improved. I read the module
code and was so horrified at its complexity that I rewrote it, not
realizing how epic that would be. Of course I broke lots of things;
halfway through the patch series I broke SCSI, so Linus applied up to
that point and we had half a module subsystem for a while; I was
literally in the airport in Tokyo on my way to Spain when he applied
it, too. Every arch maintainer woke up to find they had to implement
a whack of complex relocation code, and I got a lot of grumbling.[5]
But one person disagreed with my approach so much and so continuously
that I developed a dread of reading my mail every morning: eventually
I wrote a filter to send their mail to a separate mbox, which I've
still never read and don't intend to.
But mainly, it was a huge amount of fun. I got to hack, and geek out
with hackers all around the world. When I flew into San Jose for the
first time, DaveM offered to pick me up: turns out he had a two seater
so I rode squashed under the rear glass on the overside parcel shelf
to see the sights (Sun campus, Berkeley). Back home, I moved to
Canberra to join the legendary group of hackers at OzLabs.
The mailing list changed: I gradually learned not to be an asshole
(unless, y'know, it was *really* funny, and eventually not even then).
Most of my peers trended the same way. The kernel itself became more
formal, more complex, and giant overarching changes became far, far
fewer. There are still horrible APIs (the return value of
copy_to/from_user, using the same type for list heads and elements, to
name two[7]), but the modern calculus of disruptive changes means
sometimes we simply step over the broken paving stones instead of
repairing them.
I built a team around netfilter, then handed maintenence off to Harald
Welte and ceased contributing: I wanted him to own it entirely. I was
more nervous handing module maintenance over to someone I've never
even met or spoken to, but it's clear now that with Jessica Yu I have
scored 2 for 2. I'm as proud of choosing them as of any individual
piece of kernel code[8].
To my fellow maintainers: stay harsh on code and don't be afraid to
say "No" or "Why?"; there really are more bad ideas than good ones,
and complexity is such a bright candle for us hacker-moths. But be
gentle, kind and forgiving of your peers: respect from people you
respect is really the only reward that sticks[9].
Farewell all, and I look forward to crossing your paths again!
Rusty.
[0] Which means I'm now going maudle for NINE paragraphs! And no TLDR, bwahaha!
[1] OK, I remember this. Reality may differ.
[2] There's no recording of this talk, but it was the best technical
talk anyone has ever given on anything[1].
[3] On the internet, nobody knows you barely passed Computer Networking![4]
[4] OTOH I topped COBOL/Database programming, so I have no idea what happened.
[5] Except DaveM. I'd written test reloc code for sparc/spac64, but
he didn't know that so he just cheerfully reimplemented it.[6]
[6] Those reading this post closely may suspect that I have a massive
hackercrush on David S. Miller. Those reading the code closely, of course,
already feel that way themselves.
[7] But set_bit finally takes a long! Seriously...
[8] Though the ARRAY_SIZE macro and the poetry in lguest are a close second.
[9] Actually, bitcoin is a nice reward too; it's like crystalized machine
sweat!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The Gemini ethernet has been around for years as an out-of-tree
patch used with the NAS boxen and routers built on StorLink
SL3512 and SL3516, later Storm Semiconductor, later Cortina
Systems. These ASICs are still being deployed and brand new
off-the-shelf systems using it can easily be acquired.
The full name of the IP block is "Net Engine and Gigabit
Ethernet MAC" commonly just called "GMAC".
The hardware block contains a common TCP Offload Enginer (TOE)
that can be used by both MACs. The current driver does not use
it.
Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The trivial direct mapping implementation already does a virtual to
physical translation which isn't strictly a noop, and will soon learn
to do non-direct but linear physical to dma translations through the
device offset and a few small tricks. Rename it to a better fitting
name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
For architectures that just use the generic dma_noop_ops we can provide
a generic version of dma-mapping.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add entry for Marvell NAND controller driver and its bindings which will
soon replace the old driver pxa3xx_nand.c.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
The domain of NILFS project home was changed to "nilfs.sourceforge.io"
to enable https access (the previous domain "nilfs.sourceforge.net" is
redirected to the new one). Modify URLs of the project home to reflect
this change and to replace their protocol from http to https.
Link: http://lkml.kernel.org/r/1515416141-5614-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Software Delegated Exception Interface (SDEI) is an ARM standard
for registering callbacks from the platform firmware into the OS.
This is typically used to implement firmware notifications (such as
firmware-first RAS) or promote an IRQ that has been promoted to a
firmware-assisted NMI.
Add the code for detecting the SDEI version and the framework for
registering and unregistering events. Subsequent patches will add the
arch-specific backend code and the necessary power management hooks.
Only shared events are supported, power management, private events and
discovery for ACPI systems will be added by later patches.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Update Wenyou Yang email address.
Take advantage of this update to move this entry to the MICROCHIP / ATMEL
location and add the DT binding documentation link.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Just another contact for the amdgpu driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a GICv3 issue when parsing ACPI entries for disabled CPUs
- Driver for the MIPS Goldfish virtual platform
- Small fixlet for the ompic driver
- Interrupt polatiry support for the Raspberry Pi irqchip
-----BEGIN PGP SIGNATURE-----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=QFqN
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for 4.16 from Marc Zyngier
- Fix a GICv3 issue when parsing ACPI entries for disabled CPUs
- Driver for the MIPS Goldfish virtual platform
- Small fixlet for the ompic driver
- Interrupt polarity support for the Raspberry Pi irqchip
Add entry for the Socionext Netsec controller driver and DT bindings.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
phys_to_dma, dma_to_phys and dma_capable are helpers published by
architecture code for use of swiotlb and xen-swiotlb only. Drivers are
not supposed to use these directly, but use the DMA API instead.
Move these to a new asm/dma-direct.h helper, included by a
linux/dma-direct.h wrapper that provides the default linear mapping
unless the architecture wants to override it.
In the MIPS case the existing dma-coherent.h is reused for now as
untangling it will take a bit of work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Robin Murphy <robin.murphy@arm.com>
The ACCES PCIe-IDIO-24 device provides 56 lines of digital I/O (24 lines
of optically-isolated non-polarized digital inputs for AC and DC control
signals, 24 lines of isolated solid state FET digital outputs, and 8
non-isolated TTL/CMOS compatible programmable I/O). An interrupt is
generated when any of the inputs change state (low to high or high to
low).
Input filter control is not supported by this driver, and input filters
are deactivated by this driver. These devices are capable of
get_multiple and set_multiple functionality, but these functions have
not yet been implemented for this driver. Change-Of-State (COS)
detection functionality may be configured to fire interrupts on
exclusively rising/falling edges, but this driver currently only
implements COS detection for either both edges or none.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add Jiaxun Yang as the MIPS/Loongson-2 maintainer and add Huacai Chen
as the MIPS/Loongson-3 maintainer.
[ralf@linux-mips.org: Don't put all of drivers/platform/mips/ into these
two entries but rather only the files required even though at this time
the Loongson platforms are the only users of drivers/platform/mips/.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Hogan <james.hogan@mips.com>
Cc: Rui Wang <wangr@lemote.com>
Cc: Binbin Zhou <zhoubb@lemote.com>
Cc: Ce Sun <sunc@lemote.com>
Cc: Yao Wang <wangyao@lemote.com>
Cc: Liangliang Huang <huangll@lemote.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: r@hev.cc
Cc: zhoubb.aaron@gmail.com
Cc: huanglllzu@163.com
Cc: 513434146@qq.com
Cc: 1393699660@qq.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Huacai Chen <chenhc@lemote.com>
Patchwork: https://patchwork.linux-mips.org/patch/17888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Several staging directories have TODO files that indicate a
subsystem will be removed in the future.
Using a status entry of "S: Obsolete" helps indicate the
subsystem files should not be modified unnecessarily.
checkpatch also tests this setting and emits a warning that
the matching subsystem files should not be modified.
This might help avoid receiving patches that will be dropped.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an entry for the AXP288 PMIC drivers with myself as maintainer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Pierre was MIPI chair for SoundWire spec and we could use his help in
code reviews, so add him as a reviewer.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and
Alexander Duyck.
2) Undo unintentional UAPI change in netfilter conntrack, from Florian
Westphal.
3) Revert a change to how error codes are returned from
dev_get_valid_name(), it broke some apps.
4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6
dual-stack. From Eli Cooper.
5) Fix missed PMTU updates in geneve, from Xin Long.
6) Cure double free in macvlan, from Gao Feng.
7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from
Mohamed Ghannam.
8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed
deferral of probe when the regulator is not ready yet).
9) Missing DMA mapping error checks in 3c59x, from Neil Horman.
10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli.
11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB()
isn't initialized. From Andrei Vagin.
12) Fix crashes in fib6_add(), from Wei Wang.
13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
sh_eth: fix TXALCR1 offsets
mdio-sun4i: Fix a memory leak
phylink: mark expected switch fall-throughs in phylink_mii_ioctl
sctp: fix the handling of ICMP Frag Needed for too small MTUs
sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
xen-netfront: enable device after manual module load
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc()
sh_eth: fix SH7757 GEther initialization
net: fec: free/restore resource in related probe error pathes
uapi/if_ether.h: prevent redefinition of struct ethhdr
ipv6: fix general protection fault in fib6_add()
RDS: null pointer dereference in rds_atomic_free_op
sh_eth: fix TSU resource handling
net: stmmac: enable EEE in MII, GMII or RGMII only
rtnetlink: give a user socket to get_target_net()
MAINTAINERS: Update my email address.
can: ems_usb: improve error reporting for error warning and error passive
can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
can: gs_usb: fix return value of the "set_bittiming" callback
...
This section is also modified to include the entire rtlwifi family,
not just RTL8192CE.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Updated for Jason Gunthorpe's email and added web site for linux
integrity.
[jarkko.sakkinen@linux.intel.com: bundled web site update]
Signed-off-by: Jason Gunthorpe <jgunthorpe@ziepe.ca>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
The ov7740 (color) image sensor is a high performance VGA CMOS
image snesor, which supports for output formats: RAW RGB and YUV
and image sizes: VGA, and QVGA, CIF and any size smaller.
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is the end. Update port status. Change contact address. Add Mans.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently there is no support for TSCS42xx audio CODECs.
Add support for TSCS42xx audio CODECs.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for True Random Number Generator found in Samsung Exynos
5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
-----BEGIN PGP SIGNATURE-----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=BW4/
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.16
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
* tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers
ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers
ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: vinco: use TCB2 as timers
ARM: dts: at91: ma5d4: use TCB2 as timers
ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers
ARM: dts: at91: sama5d4ek: use TCB2 as timers
ARM: dts: at91: sama5d4: Add TCB2
ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: linea/tse850-3: use TCB0 as timers
ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers
ARM: dts: at91: kizbox2: use TCB0 as timers
ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d3xek: use TCB0 as timers
ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: kizboxmini: use TCB0 as timers
ARM: dts: at91: cosino: use TCB0 as timers
ARM: dts: at91: acme/g25: use TCB0 as timers
ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add device driver for a virtual programmable interrupt controller
The virtual PIC is designed as a device tree-based interrupt controller.
The compatible string used by OS for binding the driver is
"google,goldfish-pic".
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add documentation for DT binding of Goldfish PIC driver. The compatible
string used by OS for binding the driver is "google,goldfish-pic".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com>
Signed-off-by: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Pull RCU updates from Paul E. McKenney:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and
in kernel/torture.c). Also a couple of fixes to avoid sending
IPIs to offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends()
and read_barrier_depends().
- Miscellaneous fixes.
- Torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instate Ard Biesheuvel as the sole EFI maintainer and leave other folks
as maintainers for the EFI test driver and efivarfs file system.
Also add Ard Biesheuvel as the EFI test driver and efivarfs maintainer.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ivan Hu <ivan.hu@canonical.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180103094417.6353-1-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds a new driver for Sitronix ST7735R display panels.
This has been tested using an Adafruit 1.8" TFT.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1514833336-22564-4-git-send-email-david@lechnology.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaSWkXAAoJEHm+PkMAQRiGZ/wH/j4H3KWPOmjRPryIrJVC8f+7
LGm8RVko+J2MJzeBY6EScomPQDGLrUxy4CbEfrLs3yFaryXYb6fCCdoV+h5tSUMY
VDsa04u/SQ8T6KsnOwQApk1h06vQRVpXiCATkAxNni/T+GMoYWIwcDPyXN4oJYv8
mOWB9TS0Hb/mfCVyUrxjNkCP39lJTUGcJQSc3yxV6v9ZziVReAHYcRt3KkknDL2j
byNXZEMgwAwzyoZJfuSNkCF3DY4rcX5UnQCGmh7M6AAY9XQpMcESmW/HtVYPz2Js
9+4q52LKIMviPZQS7/fOj9uSA7IsJpPIWb9rMIvlWbuCxEaSREPLRC+yYowKOP0=
=tEHk
-----END PGP SIGNATURE-----
Merge tag 'v4.15-rc6' into patchwork
Linux 4.15-rc6
* tag 'v4.15-rc6': (734 commits)
Linux 4.15-rc6
MAINTAINERS: mark arch/blackfin/ and its gubbins as orphaned
x86/ldt: Make LDT pgtable free conditional
x86/ldt: Plug memory leak in error path
x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
x86/smpboot: Remove stale TLB flush invocations
objtool: Fix seg fault with clang-compiled objects
objtool: Fix seg fault caused by missing parameter
kbuild: add '-fno-stack-check' to kernel build options
timerqueue: Document return values of timerqueue_add/del()
timers: Invoke timer_start_debug() where it makes sense
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
timers: Reinitialize per cpu bases on hotplug
timers: Use deferrable base independent of base::nohz_active
genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI
genirq/irqdomain: Rename early argument of irq_domain_activate_irq()
x86/vector: Use IRQD_CAN_RESERVE flag
genirq: Introduce IRQD_CAN_RESERVE flag
genirq/msi: Handle reactivation only on success
gpio: brcmstb: Make really use of the new lockdep class
...
The driver gained DT support recently, so we should add the binding docs
in the MAINTAINERS file.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Here are six small fixes of some of the char/misc drivers that have been
sent in to resolve reported issues.
Nothing major, a binder use-after-free fix, some thunderbolt bugfixes, a
hyper-v bugfix, and an nvmem driver fix. All of these have been in
linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWkjKDw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkNACgmepGEvd9OJKji+rDj8ADo8lJ7BwAoLiCO22P
wwwpJ7gWnt8N2Red6xcO
=Jmx1
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are six small fixes of some of the char/misc drivers that have
been sent in to resolve reported issues.
Nothing major, a binder use-after-free fix, some thunderbolt bugfixes,
a hyper-v bugfix, and an nvmem driver fix. All of these have been in
linux-next with no reported issues for a while"
* tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: meson-mx-efuse: fix reading from an offset other than 0
binder: fix proc->files use-after-free
vmbus: unregister device_obj->channels_kset
thunderbolt: Mask ring interrupt properly when polling starts
MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry
thunderbolt: Make pathname to force_power shorter
The blackfin architecture has seen no maintainer action of any kind since
April 2015. No new code, no pull requests, no acks to patches, no response
to mails, nothing.
The web site has an expired certificate (expiration Sep 2017, issued in
2013), the mailing list sees no answers either, with one exception:
https://sourceforge.net/p/adi-buildroot/mailman/adi-buildroot-devel/
>
> Steven is no longer working on this for ADI. Acked by me if this works. Thanks.
>
> Best regards,
> Aaron Wu
> Analog Devices Inc.
But, Aaron doesn't seem to respond to queries either.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the V4L2 AS3645A sub-device driver in favour of the LED flash class
driver for the same hardware, drivers/leds/leds-as3645a.c. The latter uses
the V4L2 flash LED class framework to provide V4L2 sub-device interface.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Having a co-maintainer will enable us to be more flexible with
pull requests.
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Ensure both Mike and I are listed as maintainer contacts for Intel's qib,
hfi1, and rdmavt drivers.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The header file is used by different userspace programs to inject packets
or to decode sniffed packets. It should therefore be available to them as
userspace header.
Also other components in the kernel (like the flow dissector) require
access to the packet definitions to be able to decode ETH_P_BATMAN ethernet
packets.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull "ARM: ep93xx: ts72xx: Add support for BK3 board" from Alexander Sverdlin:
This patch series adds support for Liebherr's BK3 board, being
a derivative of TS72XX design.
* tag 'bk3' of https://github.com/sverdlin/ep93xx:
ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative
ARM: ep93xx: ts72xx: cosmetic: Add some description to ts72xx code
ARM: ep93xx: ts72xx: Rewrite ts72xx_register_flash() to accept parameters
ARM: ep93xx: ts72xx: Provide include guards for ts72xx.h file
Take over sole maintenance of Nomadik, U300 and Ux500. Since all are
Device Tree converted and using standard format drivers this is not
burdensome. Alessandro is not working on this platform any more.
Let's use one single git tree for all of them and combine the
MAINTAINERS entries into one.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a driver for the GPD pocket device's custom fan controller, which
gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.
Cc: James <kernel@madingley.org>
Suggested-by: James <kernel@madingley.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: fix test for shadow page tables
drm/amd/display: Expose dpp1_set_cursor_attributes
drm/amd/display: Update FMT and OPPBUF functions
drm/amd/display: check for null before calling is_blanked
drm/amd/display: dal 3.1.27
drm/amd/display: Fix unused variable warnings.
drm/amd/display: Only blank DCN when we have set_blank implementation
drm/amd/display: Put dcn_mi_registers with other structs
drm/amd/display: hubp refactor
drm/amd/display: integrating optc pseudocode
drm/amd/display: Call validate_fbc should_enable_fbc
drm/amd/display: Clean up DCN cursor code
drm/amd/display: fix 180 full screen pipe split
drm/amd/display: reprogram surface config on scaling change
drm/amd/display: Remove dwbc from pipe_ctx
drm/amd/display: Use the maximum link setting which EDP reported.
drm/amd/display: Add hdr_supported flag
drm/amd/display: fix global sync param retrieval when not pipe splitting
drm/amd/display: Update HUBP
drm/amd/display: fix rotated surface scaling
...
Historically, branches targeting the next release (and pulled in
linux-next) have been pushed on the l2-mtd repo and fixes branches on
the linux-mtd one. Now that all MTD maintainers have RW permissions on
linux-mtd tree, there's no good reason to have two different trees.
Move all -next branches to linux-mtd.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
I work for MediaTek on maintaining the existing MediaTek SoC whose target
to home gateway such as MT7622 and MT7623 that is reusing MT2701 related
files and will keep adding support for the following such kinds of SoCs
in the future.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-12-18
Here's the first bluetooth-next pull request for the 4.16 kernel.
- hci_ll: multiple cleanups & fixes
- Remove Gustavo Padovan from the MAINTAINERS file
- Support BLE Adversing while connected (if the controller can do it)
- DT updates for TI chips
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaNy81AAoJEHm+PkMAQRiGq2YH/1C1so18qErhPosdfeLIXLbA
iC9XcIvkPuMfjDw4EfSWOzhKnzgqGuc8q/Vzz0ulDreNVUb52nBeRy69QgNoZBTB
NkLdrUKBnlArvRhBXToQGW/s1eI/gobuHBJb7/fbpvsUtPYcDE2nUXAEsMlagn5L
BMHNzE3TByaWj0SqJtZAZvaQN2MdWV8ArHBPaC+MtR2C1VJIyl0mT9CdCu2NpTES
+FncKJ6/qplSBNSUJSfYmFLfEKVcQxvHMi1kp9jOGlVjPM3cOPKRpv8x69x/IPoB
3l82AikL+Ju0738oJ0Fp/IhfGUqpXz+FwUz1JmCdrcOby75RHomJuJCUBTtjXA4=
=lYkx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc4' into drm-next
Linux 4.15-rc4
Daniel requested it to fix some messy conflicts.
Add the SoundWire subsystem maintainer entry with details and
Sanyog and me as maintainers.
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-By: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maintenance is split between Gavin who works for Eckelmann and so has
the functional authority, knows the background and history of this bus
system and me who designed most of the actual code with the old
microcontroller code as reference.
Acked-by: Gavin Schenk <g.schenk@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add more PCI files to the PCI subsystem.
I expect Rafael to continue merging things in drivers/acpi/pci*, but it's
nice to have linux-pci included on patches.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD is the major user of TTM, so it also makes sense that we maintain
it.
v2: mention Alex git tree as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commits adds a header describing the hardware interface for the
Virtual Box Guest PCI device used in Virtual Box virtual machines and
utility functions for talking to the Virtual Box hypervisor over this
interface.
These utility functions will used both by the vboxguest driver for the
PCI device which offers the /dev/vboxguest ioctl API and by the vboxfs
driver which offers folder sharing support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit adds the headers describing the ioctl API for the
/dev/vboxguest device used by the Virtual Box Guest Additions
in Virtual Box virtual machines.
The driver providing the /dev/vboxguest device will allow Virtual Box
Guest Additions features such as copy-and-paste, seamless mode and
OpenGL pass-through.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the brcmstb entry to cover the Broadcom Brahma-B15 processor
read-ahead cache support code.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Three sets of overlapping changes, two in the packet scheduler
and one in the meson-gxl PHY driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
This new driver belongs to the mvebu family, update the MAINTAINER file
to document it.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make sure Thunderbolt maintainers get to see patches that touch
documentation of the Thunderbolt driver as well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:
1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot.
2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik
Brueckner.
3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes
Berg.
4) Add missing barriers to ptr_ring, from Michael S. Tsirkin.
5) Don't advertise gigabit in sh_eth when not available, from Thomas
Petazzoni.
6) Check network namespace when delivering to netlink taps, from Kevin
Cernekee.
7) Kill a race in raw_sendmsg(), from Mohamed Ghannam.
8) Use correct address in TCP md5 lookups when replying to an incoming
segment, from Christoph Paasch.
9) Add schedule points to BPF map alloc/free, from Eric Dumazet.
10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also
from Eric Dumazet.
11) Fix SKB leak in tipc, from Jon Maloy.
12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz.
13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn.
14) Add some new qmi_wwan device IDs, from Daniele Palmas.
15) Fix static key imbalance in ingress qdisc, from Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: qcom/emac: Reduce timeout for mdio read/write
net: sched: fix static key imbalance in case of ingress/clsact_init error
net: sched: fix clsact init error path
ip_gre: fix wrong return value of erspan_rcv
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
pkt_sched: Remove TC_RED_OFFLOADED from uapi
net: sched: Move to new offload indication in RED
net: sched: Add TCA_HW_OFFLOAD
net: aquantia: Increment driver version
net: aquantia: Fix typo in ethtool statistics names
net: aquantia: Update hw counters on hw init
net: aquantia: Improve link state and statistics check interval callback
net: aquantia: Fill in multicast counter in ndev stats from hardware
net: aquantia: Fill ndev stat couters from hardware
net: aquantia: Extend stat counters to 64bit values
net: aquantia: Fix hardware DMA stream overload on large MRRS
net: aquantia: Fix actual speed capabilities reporting
sock: free skb in skb_complete_tx_timestamp on error
s390/qeth: update takeover IPs after configuration change
s390/qeth: lock IP table while applying takeover changes
...
The most important one is the bfa fix because it's easy to oops the
kernel with this driver (this includes the commit that corrects the
compiler warning in the original), a regression in the new timespec
conversion in aacraid and a regression in the Fibre Channel ELS
handling patch. The other three are a theoretical problem with
termination in the vendor/host matching code and a use after free in
lpfc.
The additional patches are a fix for an I/O hang in the mq code under
certain circumstances and a rare oops in some debugging code.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9sav
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important one is the bfa fix because it's easy to oops the
kernel with this driver (this includes the commit that corrects the
compiler warning in the original), a regression in the new timespec
conversion in aacraid and a regression in the Fibre Channel ELS
handling patch.
The other three are a theoretical problem with termination in the
vendor/host matching code and a use after free in lpfc.
The additional patches are a fix for an I/O hang in the mq code under
certain circumstances and a rare oops in some debugging code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix a scsi_show_rq() NULL pointer dereference
scsi: MAINTAINERS: change FCoE list to linux-scsi
scsi: libsas: fix length error in sas_smp_handler()
scsi: bfa: fix type conversion warning
scsi: core: run queue if SCSI device queue isn't ready and queue is idle
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
scsi: scsi_devinfo: handle non-terminated strings
scsi: bfa: fix access to bfad_im_port_s
scsi: aacraid: address UBSAN warning regression
scsi: libfc: fix ELS request handling
scsi: lpfc: Use after free in lpfc_rq_buf_free()
I work for MediaTek and maintain SoC targeting to home gateway and
also will keep extending and testing the function from MediaTek
switch.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that lirc is no longer in the staging area, remove the entry.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
NVIDIA Tegra20/30/114/124/132 SoC's have video decoder engine that
supports standard set of video formats like H.264 / MPEG-4 / WMV / VC1.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The BK3 board is a derivative of the ts72xx reference design.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Jose Abreu will join to maintain dwc-xlgmac.
He will help with new feature development for
this driver. Thanks Jose and welcome on board!
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NXP TDA18250 silicon tuner driver.
Version 4 includes some checkpatch fixes.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I'm juggling too many things, and drm-misc maintenance is one that I
keep dropping on the floor. Admit reality and remove myself as
maintainer. This still leaves us with a nice team of three who are
actually doing the drm-misc work, while I focus on drm-intel.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Relunctantly-Acked-By: Sean Paul <seanpaul@chromium.org>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123121308.12818-1-jani.nikula@intel.com
It's been sometime I'm not involved in Bluetooth anymore but I never
got around to remove my name from it. Doing it now.
Thanks for all the fish! :)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Let's keep maintenance of the driver and the bindings in one place.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
fcoe-devel@open-fcoe.org is defunct and all patches are routed via the
SCSI tree anyways.
So update MAINTAINERS accordingly.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the tree listed for X86 PLATFORM DRIVERS to its new top level
reposority at infradead. The old one is an alias to the new one, but
we prefer to remove the "user/dvhart" from the URL.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
There is some confusion about where patches to kernel/torture.c
and kernel/locking/locktorture.c should be sent. This commit
therefore updates MAINTAINERS appropriately.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Add myself as co-maintainer for Samsung Security SubSystem driver.
I have added major functionality to the driver [hash acceleration],
I have access to documentation and to hardware for testing, I can
also dedicate some of my paid time for reviewing and verifying changes
to the driver.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ARM SoC fixes for this merge window:
- A revert of all SCPI changes from the 4.15 merge window. They had
regressions on the Amlogic platforms, and the submaintainer isn't
around to fix these bugs due to vacation, etc. So we agreed to revert
and revisit in next release cycle.
- A series fixing a number of bugs for ARM CCN interconnect, around
module unload, smp_processor_id() in preemptable context, and fixing
some memory allocation failure checks.
- A handful of devicetree fixes for different platforms, fixing
warnings and errors that were previously ignored by the compiler.
- The usual set of mostly minor fixes for different platforms.
-----BEGIN PGP SIGNATURE-----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=DIHP
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
- A revert of all SCPI changes from the 4.15 merge window. They had
regressions on the Amlogic platforms, and the submaintainer isn't
around to fix these bugs due to vacation, etc. So we agreed to revert
and revisit in next release cycle.
- A series fixing a number of bugs for ARM CCN interconnect, around
module unload, smp_processor_id() in preemptable context, and fixing
some memory allocation failure checks.
- A handful of devicetree fixes for different platforms, fixing
warnings and errors that were previously ignored by the compiler.
- The usual set of mostly minor fixes for different platforms.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM64: dts: meson-gx: fix UART pclk clock name
ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
ARM: dts: Fix dm814x missing phy-cells property
ARM: dts: Fix elm interrupt compiler warning
bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
bus: arm-cci: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
bus: arm-ccn: Simplify code
bus: arm-ccn: Check memory allocation failure
bus: arm-ccn: constify attribute_group structures.
firmware: arm_scpi: Revert updates made during v4.15 merge window
arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
arm64: dts: sort vendor subdirectories in Makefile alphabetically
meson-gx-socinfo: Fix package id parsing
ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
ARM: dts: meson: fix the memory region of the GPIO interrupt controller
ARM: dts: meson: correct the sort order for the the gpio_intc node
MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
arm64: dts: uniphier: remove unnecessary interrupt-parent
...
v2:
* Removed unused flags from struct kgd_mem
* Updated some comments
* Added a check to unmap_memory_from_gpu whether BO was mapped
v3: add mutex_destroy in relevant places
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This fence is used by KFD to keep memory resident while user mode
queues are enabled. Trying to evict memory will trigger the
enable_signaling callback, which starts a KFD eviction, which
involves preempting user mode queues before signaling the fence.
There is one such fence per process.
v2:
* Grab a reference to mm_struct
* Dereference fence after NULL check
* Simplify fence release, no need to signal without anyone waiting
* Added signed-off-by Harish, who is the original author of this code
v3:
* update MAINTAINERS file
* change amd_kfd_ prefix to amdkfd_
* remove useless initialization of variable to NULL
v4:
* set amdkfd_fence_ops to be static
* Suggested by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
The ARM reference designs "Versatile AB" and "Versatile PB"
contain panel connectors with autodetection of the connected
panel type. This adds a small driver utilizing the MFD syscon
look-up to read the autodetection register and set up the
corresponding panel appropriately.
In the source file there is a bit of elaboration of the
panel types and interfaces on these boards.
This was tested with the PL111 DRM driver on the ARM Versatile
AB with the IB2 daughterboard.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
I'm stepping down, also handing all the drm-misc stuff to the new
team. Plan is that Sean handles 4.17, and Maarten then has fun with
4.18 as his first release.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131102156.25634-1-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----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=xoHW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the media subsytem:
- The largest amount of fixes in this series is with regards to
comments that aren't kernel-doc, but start with "/**".
A new check added for 4.15 makes it to produce a *huge* amount of
new warnings (I'm compiling here with W=1). Most of the patches in
this series fix those.
No code changes - just comment changes at the source files
- rc: some fixed in order to better handle RC repetition codes
- v4l-async: use the v4l2_dev from the root notifier when matching
sub-devices
- v4l2-fwnode: Check subdev count after checking port
- ov 13858 and et8ek8: compilation fix with randconfigs
- usbtv: a trivial new USB ID addition
- dibusb-common: don't do DMA on stack on firmware load
- imx274: Fix error handling, add MAINTAINERS entry
- sir_ir: detect presence of port"
* tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits)
media: imx274: Fix error handling, add MAINTAINERS entry
media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
media: v4l2-fwnode: Check subdev count after checking port
media: et8ek8: select V4L2_FWNODE
media: ov13858: Select V4L2_FWNODE
media: rc: partial revert of "media: rc: per-protocol repeat period"
media: dvb: i2c transfers over usb cannot be done from stack
media: dvb-frontends: complete kernel-doc markups
media: docs: add documentation for frontend attach info
media: dvb_frontends: fix kernel-doc macros
media: drivers: remove "/**" from non-kernel-doc comments
media: lm3560: add a missing kernel-doc parameter
media: rcar_jpu: fix two kernel-doc markups
media: vsp1: add a missing kernel-doc parameter
media: soc_camera: fix a kernel-doc markup
media: mt2063: fix some kernel-doc warnings
media: radio-wl1273: fix a parameter name at kernel-doc macro
media: s3c-camif: add missing description at s3c_camif_find_format()
media: mtk-vpu: add description for wdt fields at struct mtk_vpu
media: vdec: fix some kernel-doc warnings
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2017-12-07
The following pull-request contains BPF updates for your net-next tree.
The main changes are:
1) Detailed documentation of BPF development process from Daniel.
2) Addition of is_fullsock, snd_cwnd and srtt_us fields to bpf_sock_ops
from Lawrence.
3) Minor follow up for bpf_skb_set_tunnel_key() from William.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the visorbus driver out of staging (drivers/staging/unisys/visorbus)
and to drivers/visorbus. Modify the configuration and makefiles so they
now reference the new location. The s-Par header file visorbus.h that is
referenced by all s-Par drivers, is being moved into include/linux.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the wildcards present, this entry does not cover subdirectories.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Fix long standing problem with kdb kallsyms_symbol_next() return value
* Add new co-maintainer Daniel Thompson
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2jeq
-----END PGP SIGNATURE-----
Merge tag 'for_linus-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kgdb fixes from Jason Wessel:
- Fix long standing problem with kdb kallsyms_symbol_next() return
value
- Add new co-maintainer Daniel Thompson
* tag 'for_linus-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kgdb/kdb/debug_core: Add co-maintainer Daniel Thompson
kdb: Fix handling of kallsyms_symbol_next() return value
i) Add the bpf and bpf-next trees to the maintainers entry
so they can be found easily and picked up by test bots
etc that would integrate all trees from maintainers file.
Suggested by Stephen while integrating the trees into
linux-next.
ii) Add the two headers defining BPF/XDP tracepoints to the
list of files as well.
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This resolves the merge issue pointed out by Stephen in
drivers/iio/adc/meson_saradc.c.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one more
MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that was
not in linux-next, but should not be an issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia6IQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykaKwCgx1lw4qMmetUzjKBX+OMgEkFZo3UAoIL/DLiB
ZyMb52XWdP0pScSsFUyn
=riSs
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small misc driver fixes for 4.15-rc3 to resolve reported
issues. Specifically these are:
- binder fix for a memory leak
- vpd driver fixes for a number of reported problems
- hyperv driver fix for memory accesses where it shouldn't be.
All of these have been in linux-next for a while. There's also one
more MAINTAINERS file update that came in today to get the Android
developer's emails correct, which is also in this pull request, that
was not in linux-next, but should not be an issue"
* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: update Android driver maintainers.
firmware: vpd: Fix platform driver and device registration/unregistration
firmware: vpd: Tie firmware kobject to device lifetime
firmware: vpd: Destroy vpd sections in remove function
hv: kvp: Avoid reading past allocated blocks from KVP file
Drivers: hv: vmbus: Fix a rescind issue
ANDROID: binder: fix transaction leak.
Small overlapping change conflict ('net' changed a line,
'net-next' added a line right afterwards) in flexcan.c
Signed-off-by: David S. Miller <davem@davemloft.net>
The Axentia Nattis is a device designed for presenting departures for
public transport systems. The Natte helper board provides power and
features a battery of battery chargers.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Pull networking fixes from David Miller:
1) Various TCP control block fixes, including one that crashes with
SELinux, from David Ahern and Eric Dumazet.
2) Fix ACK generation in rxrpc, from David Howells.
3) ipvlan doesn't set the mark properly in the ipv4 route lookup key,
from Gao Feng.
4) SIT configuration doesn't take on the frag_off ipv4 field
configuration properly, fix from Hangbin Liu.
5) TSO can fail after device down/up on stmmac, fix from Lars Persson.
6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet.
7) Various SKB leak fixes in vhost/tun/tap (mostly observed as
performance problems). From Wei Xu.
8) mvpps's TX descriptors were not zero initialized, from Yan Markman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits)
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
rxrpc: Fix the MAINTAINERS record
rxrpc: Use correct netns source in rxrpc_release_sock()
liquidio: fix incorrect indentation of assignment statement
stmmac: reset last TSO segment size after device open
ipvlan: Add the skb->mark as flow4's member to lookup route
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix GSO throughput regression
s390/qeth: fix thinko in IPv4 multicast address tracking
tap: free skb if flags error
tun: free skb in early errors
vhost: fix skb leak in handle_rx()
bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg()
bnxt_en: fix dst/src fid for vxlan encap/decap actions
bnxt_en: wildcard smac while creating tunnel decap filter
bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown
phylink: ensure we take the link down when phylink_stop() is called
sfp: warn about modules requiring address change sequence
sfp: improve RX_LOS handling
...
The chip family of TILEPro and TILE-Gx was developed by Tilera, which
was eventually acquired by Mellanox. The tile architecture was added to
the kernel in 2010 and first appeared in 2.6.36.
Now at Mellanox we are developing new chips based on the ARM64
architecture; our last TILE-Gx chip (the Gx72) was released in 2013, and
our customers using tile architecture products are not, as far as we
know, looking to upgrade to newer kernel releases. In the absence of
someone in the community stepping up to take over maintainership, this
commit marks the architecture as orphaned.
Cc: Chris Metcalf <metcalf@alum.mit.edu>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to pull 66660d4cf2 (drm: add connector info/property for
non-desktop displays [v2]) into drm-misc-next to continue the development
of the display rotation series.
Effectively this also pulls 4.15-r2 into drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
A frequent source of build problems is poor handling of optional PM
support, almost all development is done with the PM options enabled
but they can be turned off. Currently few if any of the build test
services do this as standard as there is no standard config for it and
the use of selects and def_bool means that simply setting CONFIG_PM=n
doesn't do what is expected. To make this easier provide a fragement
that can be used with KCONFIG_ALLCONFIG to force PM off.
CONFIG_XEN is disabled as Xen uses hibernation callbacks which end up
turning on power management on architectures with Xen. Some cpuidle
implementations on ARM select PM so CONFIG_CPU_IDLE is disabled, and
some ARM architectures unconditionally enable PM so they are also
disabled.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Many improvements for selftests and other igt tests (Chris)
- Forcewake with PUNIT->PMIC bus fixes and robustness (Hans)
- Define an engine class for uABI (Tvrtko)
- Context switch fixes and improvements (Chris)
- GT powersavings and power gating simplification and fixes (Chris)
- Other general driver clean-ups (Chris, Lucas, Ville)
- Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna)
- IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten)
- OA perf fixes and support to Coffee Lake and Cannonlake (Lionel)
- Fixes around GPU fault registers (Michel)
- GEM Proxy (Tina)
- Refactor of Geminilake and Cannonlake plane color handling (James)
- Generalize transcoder loop (Mika Kahola)
- New HW Workaround for Cannonlake and Geminilake (Rodrigo)
- Resume GuC before using GEM (Chris)
- Stolen Memory handling improvements (Ville)
- Initialize entry in PPAT for older compilers (Chris)
- Other fixes and robustness improvements on execbuf (Chris)
- Improve logs of GEM_BUG_ON (Mika Kuoppala)
- Rework with massive rename of GuC functions and files (Sagar)
- Don't sanitize frame start delay if pipe is off (Ville)
- Cannonlake clock fixes (Rodrigo)
- Cannonlake HDMI 2.0 support (Rodrigo)
- Add a GuC doorbells selftest (Michel)
- Add might_sleep() check to our wait_for() (Chris)
Many GVT changes for 4.16:
- CSB HWSP update support (Weinan)
- GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo)
- full virtualized opregion (Xiaolin)
- VM health check for sane fallback (Fred)
- workload submission code refactor for future enabling (Zhi)
- Updated repo URL in MAINTAINERS (Zhenyu)
- other many misc fixes
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaD2cyAAoJEPpiX2QO6xPKuiEH/2/J7Ebf5IRZtaTU+ke2uOI4
2YCdrn9F1guz6d+cZtsLPkJ9JwQlz9EftfB7KT+9dT8viEG0FFna9bV+Xz3wyGQ6
DRlP9tCFnCDaOyZBI5QshubuzldabPpfscPJI7/EMr91jtveGhKIhsRzHBxKCEZF
LKlAHtXAWSkTozmh6bU+wf5TEOFzYv2oquTVn5ZJrpYlqup/wEKh+KnL9eBQ3+Qp
FLnmKjInaadOV/uXQfeWstJuohG/pfcNm68OmDOxYNmwpeNnwbtfKT9eZeDtDZDy
dXj9mokeTwg4fBrXX/tyxuKogywxQSNFTqCU2yY9up+35ykmjVN8p/1BYi+GGe0=
=ePes
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
More change sets for 4.16:
- Many improvements for selftests and other igt tests (Chris)
- Forcewake with PUNIT->PMIC bus fixes and robustness (Hans)
- Define an engine class for uABI (Tvrtko)
- Context switch fixes and improvements (Chris)
- GT powersavings and power gating simplification and fixes (Chris)
- Other general driver clean-ups (Chris, Lucas, Ville)
- Removing old, useless and/or bad workarounds (Chris, Oscar, Radhakrishna)
- IPS, pipe config, etc in preparation for another Fast Boot attempt (Maarten)
- OA perf fixes and support to Coffee Lake and Cannonlake (Lionel)
- Fixes around GPU fault registers (Michel)
- GEM Proxy (Tina)
- Refactor of Geminilake and Cannonlake plane color handling (James)
- Generalize transcoder loop (Mika Kahola)
- New HW Workaround for Cannonlake and Geminilake (Rodrigo)
- Resume GuC before using GEM (Chris)
- Stolen Memory handling improvements (Ville)
- Initialize entry in PPAT for older compilers (Chris)
- Other fixes and robustness improvements on execbuf (Chris)
- Improve logs of GEM_BUG_ON (Mika Kuoppala)
- Rework with massive rename of GuC functions and files (Sagar)
- Don't sanitize frame start delay if pipe is off (Ville)
- Cannonlake clock fixes (Rodrigo)
- Cannonlake HDMI 2.0 support (Rodrigo)
- Add a GuC doorbells selftest (Michel)
- Add might_sleep() check to our wait_for() (Chris)
Many GVT changes for 4.16:
- CSB HWSP update support (Weinan)
- GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo)
- full virtualized opregion (Xiaolin)
- VM health check for sane fallback (Fred)
- workload submission code refactor for future enabling (Zhi)
- Updated repo URL in MAINTAINERS (Zhenyu)
- other many misc fixes
* tag 'drm-intel-next-2017-11-17-1' of git://anongit.freedesktop.org/drm/drm-intel: (260 commits)
drm/i915: Update DRIVER_DATE to 20171117
drm/i915: Add a policy note for removing workarounds
drm/i915/selftests: Report ENOMEM clearly for an allocation failure
Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"
drm/i915: Calculate g4x intermediate watermarks correctly
drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.
drm/i915: Pass crtc_state to ips toggle functions, v2
drm/i915: Pass idle crtc_state to intel_dp_sink_crc
drm/i915: Enable FIFO underrun reporting after initial fastset, v4.
drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM
drm/i915: Add might_sleep() check to wait_for()
drm/i915/selftests: Add a GuC doorbells selftest
drm/i915/cnl: Extend HDMI 2.0 support to CNL.
drm/i915/cnl: Simplify dco_fraction calculation.
drm/i915/cnl: Don't blindly replace qdiv.
drm/i915/cnl: Fix wrpll math for higher freqs.
drm/i915/cnl: Fix, simplify and unify wrpll variable sizes.
drm/i915/cnl: Remove useless conversion.
drm/i915/cnl: Remove spurious central_freq.
drm/i915/selftests: exercise_ggtt may have nothing to do
...
Cross-subsystem Changes:
- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)
Core Changes:
The most important changes are:
- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)
Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements. And a bunch of misc improvements, clean ups and style
changes and doc updates
[airlied: drop eld bits from amdgpu_dm]
Driver Changes:
- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)
* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
drm/bridge: tc358767: add copyright lines
MAINTAINERS: change maintainer for Rockchip drm drivers
drm/vblank: Fix vblank timestamp debugs
drm/via: use monotonic time for VIA_WAIT_IRQ
dma-buf: Fix ifnullfree.cocci warnings
drm/printer: Add drm_vprintf()
drm/edid: Allow HDMI infoframe without VIC or S3D
video/hdmi: Allow "empty" HDMI infoframes
dma-buf/fence: Fix lock inversion within dma-fence-array
drm/sti: Handle return value of platform_get_irq_byname
drm/vc4: Add support for NV21 and NV61.
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm/vmwgfx: Try to fix plane clipping
drm/vmwgfx: Use drm_plane_helper_check_state()
drm/vmwgfx: Remove bogus crtc coords vs fb size check
gpu: gma500: remove unneeded DRIVER_LICENSE #define
drm: don't link DP aux i2c adapter to the hardware device node
...
Drop reference to obsolete maintainer tree
Fix overflow bug in pmbus driver
Fix SMBUS timeout problem in jc42 driver
For the SMBUS timeout handling, we had a brief discussion if this should
be considered a bug fix or a feature. Peter says "it fixes real problems
where the application misbehave due to faulty content when reading from
an eeprom", and he needs the patch in his company's v4.14 images. This is
good enough for me and warrants backport to stable kernels.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5rYP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fixes:
- Drop reference to obsolete maintainer tree
- Fix overflow bug in pmbus driver
- Fix SMBUS timeout problem in jc42 driver
For the SMBUS timeout handling, we had a brief discussion if this
should be considered a bug fix or a feature. Peter says "it fixes real
problems where the application misbehave due to faulty content when
reading from an eeprom", and he needs the patch in his company's v4.14
images. This is good enough for me and warrants backport to stable
kernels"
* tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) optionally try to disable the SMBUS timeout
hwmon: (pmbus) Use 64bit math for DIRECT format values
hwmon: Drop reference to Jean's tree
Fix the MAINTAINERS record so that it's more obvious who the maintainer for
AF_RXRPC is.
Reported-by: Joe Perches <joe@perches.com>
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to run selftests without any hardware required we
need a software model. The model can also serve as an example
implementation for those implementing actual HW offloads.
The dummy driver have previously been extended to test SR-IOV,
but the general consensus seems to be against adding further
features to it.
Add a new driver for purposes of software modelling only.
eBPF and SR-IOV will be added here shortly, others are invited
to further extend the driver with their offload models.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The user space libgpiod project is now tightly coupled with the
gpio-mockup module, so let me know when any changes to it are being
proposed.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver has been in the tree for a while, but its binding document
is missing. Hence, here it is.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the missing MAINTAINERS entry for imx274, fix error handling in driver
probe and unregister the correct control handler in driver remove.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change the maintainer to Chris Lee who has access to Myricom hardware
and can test/review. Update the website URL.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For personal reasons, Mark Yao will leave rockchip,
can not continue maintain drm/rockchip, Sandy Huang
and Heiko Stübner will take over drm/rockchip.
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Heiko Stübner <heiko@sntech.de>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul added Heiko]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129142459.32351-1-seanpaul@chromium.org
There are several product lines in Socionext. I maintain only
DT files prefixed with "uniphier".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
The Netware Core Protocol is a file system that talks to
Netware clients over IPX. Since IPX has been dead for many years
move the file system into staging for eventual interment.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Netware IPX protocol is very old and no one should still be using
it. It is time to move it into staging for a while and eventually
decommision it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TI Keystone and DRA7xx SoCs have support for EDAC on DDR3 memory that can
correct one bit errors and detect two bit errors. Add EDAC driver for this
feature which plugs into the generic kernel EDAC framework.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-omap@vger.kernel.org
Link: http://lkml.kernel.org/r/1510578490-14510-1-git-send-email-t-kristo@ti.com
[ Add SPDX tag and make _emif_get_id() use edac_printk(). ]
Signed-off-by: Borislav Petkov <bp@suse.de>
This tree has not been used for over a year, Guenter is taking all
the hwmon patches in practice.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Subsystem:
- Fix setting the alarm to the next expiring timer
New driver:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers:
- Use generic nvmem to expose the Non volatile ram for ds1305, ds1511,
m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume
-----BEGIN PGP SIGNATURE-----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=tRVi
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There is nothing scary this cycle, mostly driver fixes and updates.
The core fix has been in for a while and has been tested on multiple
kernel revisions by multiple teams.
Core:
- Fix setting the alarm to the next expiring timer
New drivers:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers updates:
- Use generic nvmem to expose the Non volatile ram for ds1305,
ds1511, m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume"
* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
dt-bindings: rtc: imxdi: Improve the bindings text
rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
rtc: at91rm9200: fix reading alarm value
rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
rtc: sysfs: Use time64_t variables to set time/alarm
rtc: xgene: mark PM functions as __maybe_unused
rtc: xgene: Fix suspend/resume
rtc: pcf8563: don't alway enable the alarm
rtc: pcf8563: fix output clock rate
rtc: rx8010: Fix for incorrect return value
rtc: rx8010: Specify correct address for RX8010_RESV31
rtc: rx8010: Remove duplicate define
rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
rtc: m41t80: fix m41t80_sqw_round_rate return value
rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
rtc: add support for NXP PCF85363 real-time clock
rtc: omap: Support scratch registers
...
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.
Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in
commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
bug fixes.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaEObnAAoJEG5mS6x6i9IjJD0P/jaJixjXVVPsA6pK31iykVad
7GIe0GHWDo/f9kHgR9sJQ27RvX/xLmr4IgQwZCWMT3YM2WPKk1i6eUwGycLRzgIq
E4S3ehtqqryD/p1tvYXc8JXjaO2E99BjA9BtIT2TzXV8clUjl64K8D6XW0F2ilzM
x1Ctmgf+c7z4In+gf/lazQOSIPE0qTAEVcQRwASg3GSQIuI6T3Iy40j3kCEys5IX
MVdHTidUK92YUSyp7tCmAzj2Ffts60+b7gZhzv92eBtrZof8BZ/58UIJOR2CMcAp
M4b/DxJLHGwvAajX+RyIHSJhXocMf2Wc1EuctVFOmBZt2lZuo4Y0ddVhggQKAOjc
g26Lou4pPlZrAvcslzK1y2mzWpKRWB6HkUS9j8Tar1mj5oWyokCNSPYsZQhuUDJx
nFIIbQsbVqkhZ5tAdBz/Fs4afkA0EWDLepXdBNT0Z4BnhFI/vWNDwsKksHV++T4W
fg+H/xcKtqbzpxPdu75/rcXjnzhDtGvyFAp+2Z7CFTBK8Di/cB4y+FewGVfqa8wm
GPN/cTEOP6siJawow5sviE4fEbWHGHxHvji07QsYHZa1BEH78cPi4svGmJLmpHgA
UcCB3UqwudOOCALNbXz1nHlzwgBarXLeHZuHiRhOEaYRZUbLkJ9K56dn7RCxV1Ws
/EntY8CCBNRAKl79y1kJ
=svG8
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.15' of git://github.com/jonmason/ntb
Pull ntb updates from Jon Mason:
"Support for the switchtec ntb and related changes. Also, a couple of
bug fixes"
[ The timing isn't great. I had asked people to send me pull requests
before my family vacation, and this code has not even been in
linux-next as far as I can tell. But Logan Gunthorpe pleaded for its
inclusion because the Switchtec driver has apparently been around for
a while, just never in linux-next - Linus ]
* tag 'ntb-4.15' of git://github.com/jonmason/ntb:
ntb: intel: remove b2b memory window workaround for Skylake NTB
NTB: make idt_89hpes_cfg const
NTB: switchtec_ntb: Update switchtec documentation with notes for NTB
NTB: switchtec_ntb: Add memory window support
NTB: switchtec_ntb: Implement scratchpad registers
NTB: switchtec_ntb: Implement doorbell registers
NTB: switchtec_ntb: Add link management
NTB: switchtec_ntb: Add skeleton NTB driver
NTB: switchtec_ntb: Initialize hardware for doorbells and messages
NTB: switchtec_ntb: Initialize hardware for memory windows
NTB: switchtec_ntb: Introduce initial NTB driver
NTB: Add check and comment for link up to mw_count() and mw_get_align()
NTB: Ensure ntb_mw_get_align() is only called when the link is up
NTB: switchtec: Add link event notifier callback
NTB: switchtec: Add NTB hardware register definitions
NTB: switchtec: Export class symbol for use in upper layer driver
NTB: switchtec: Move structure definitions into a common header
ntb: update maintainer list for Intel NTB driver
Seeing the Switchtec NTB hardware shares the same endpoint as the
management endpoint we utilize the class_interface API to register
an NTB driver for every Switchtec device in the system that has the
NTB class code.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Create the switchtec.h header in include/linux with hardware defines
and the switchtec_dev structure. Both moved directly from switchtec.c.
This is a prep patch for creating an NTB driver for Switchtec.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher.
The latter provides a character device interface to user space.
The pull request contains a merge of immutable branch from Wolfram Sang
in order to apply a dependent fix to the Intel CherryTrail Battery
Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
Two commits appear here which were previously merged during the
v4.14-rcX cycle:
- d7ca5ebf24 platform/x86: intel_pmc_ipc: Use devm_* calls in driver probe function
- e3075fd6f8 platform/x86: intel_pmc_ipc: Use spin_lock to protect GCR updates
Add driver to force WMI Thunderbolt controller power status:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
MAINTAINERS:
- Add entry for the PEAQ WMI hotkeys driver
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list
-----BEGIN PGP SIGNATURE-----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=upqs
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
"Here is the collected material against Platform Drivers x86 subsystem.
It's rather bit busy cycle for PDx86, mostly due to Dell SMBIOS driver
activity
For this cycle we have quite an update for the Dell SMBIOS driver
including WMI work to provide an interface for SMBIOS tokens via sysfs
and WMI support for 2017+ Dell laptop models. SMM dispatcher code is
split into a separate driver followed by a new WMI dispatcher. The
latter provides a character device interface to user space.
The git history also contains a merge of immutable branch from Wolfram
Sang in order to apply a dependent fix to the Intel CherryTrail
Battery Management driver.
Other Intel drivers got a lot of cleanups. The Turbo Boost Max 3.0
support is added for Intel Skylake.
Peaq WMI hotkeys driver gets its own maintainer and white list of
supported models.
Silead DMI is expanded to support few additional platforms.
Tablet mode via GMMS ACPI method is added to support some ThinkPad
tablets.
new driver:
- Add driver to force WMI Thunderbolt controller power status
asus-wmi:
- Add lightbar led support
dell-laptop:
- Allocate buffer before rfkill use
dell-smbios:
- fix string overflow
- Add filtering support
- Introduce dispatcher for SMM calls
- Add a sysfs interface for SMBIOS tokens
- only run if proper oem string is detected
- Prefix class/select with cmd_
- Add pr_fmt definition to driver
dell-smbios-smm:
- test for WSMT
dell-smbios-wmi:
- release mutex lock on WMI call failure
- introduce userspace interface
- Add new WMI dispatcher driver
dell-smo8800:
- remove redundant assignments to byte_data
dell-wmi:
- don't check length returned
- clean up wmi descriptor check
- increase severity of some failures
- Do not match on descriptor GUID modalias
- Label driver as handling notifications
dell-*wmi*:
- Relay failed initial probe to dependent drivers
dell-wmi-descriptor:
- check if memory was allocated
- split WMI descriptor into it's own driver
fujitsu-laptop:
- Fix radio LED detection
- Don't oops when FUJ02E3 is not presnt
hp_accel:
- Add quirk for HP ProBook 440 G4
hp-wmi:
- Fix tablet mode detection for convertibles
ideapad-laptop:
- Add Lenovo Yoga 920-13IKB to no_hw_rfkill dmi list
intel_cht_int33fe:
- Update fusb302 type string, add properties
- make a couple of local functions static
- Work around BIOS bug on some devices
intel-hid:
- Power button suspend on Dell Latitude 7275
intel_ips:
- Convert timers to use timer_setup()
- Remove FSF address from GPL notice
- Remove unneeded fields and label
- Keep pointer to struct device
- Use PCI_VDEVICE() macro
- Switch to new PCI IRQ allocation API
- Simplify error handling via devres API
intel_pmc_ipc:
- Revert Use MFD framework to create dependent devices
- Use MFD framework to create dependent devices
- Use spin_lock to protect GCR updates
- Use devm_* calls in driver probe function
intel_punit_ipc:
- Fix resource ioremap warning
intel_telemetry:
- Remove useless default in Kconfig
- Add needed inclusion
- cleanup redundant headers
- Fix typos
- Fix load failure info
intel_telemetry_debugfs:
- Use standard ARRAY_SIZE() macro
intel_turbo_max_3:
- Add Skylake platform
intel-wmi-thunderbolt:
- Silence error cases
mlx-platform:
- make a couple of structures static
peaq_wmi:
- Fix missing terminating entry for peaq_dmi_table
peaq-wmi:
- Remove unnecessary checks from peaq_wmi_exit
- Add DMI check before binding to the WMI interface
- Revert Blacklist Lenovo ideapad 700-15ISK
- Blacklist Lenovo ideapad 700-15ISK
silead_dmi:
- Add silead, home-button property to some tablets
- Add entry for the Digma e200 tablet
- Fix GP-electronic T701 entry
- Add entry for the Chuwi Hi8 Pro tablet
sony-laptop:
- Drop variable assignment in sony_nc_setup_rfkill()
- Fix error handling in sony_nc_setup_rfkill()
thinkpad_acpi:
- Implement tablet mode using GMMS method
tools/wmi:
- add a sample for dell smbios communication over WMI
wmi:
- release mutex on module acquistion failure
- create userspace interface for drivers
- Don't allow drivers to get each other's GUIDs
- Add new method wmidev_evaluate_method
- Destroy on cleanup rather than unregister
- Cleanup exit routine in reverse order of init
- Sort include list"
* tag 'platform-drivers-x86-v4.15-1' of git://git.infradead.org/linux-platform-drivers-x86: (74 commits)
platform/x86: silead_dmi: Add silead, home-button property to some tablets
platform/x86: dell-laptop: Allocate buffer before rfkill use
platform/x86: dell-*wmi*: Relay failed initial probe to dependent drivers
platform/x86: dell-wmi-descriptor: check if memory was allocated
platform/x86: Revert intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: dell-smbios-wmi: release mutex lock on WMI call failure
platform/x86: wmi: release mutex on module acquistion failure
platform/x86: dell-smbios: fix string overflow
platform/x86: intel_pmc_ipc: Use MFD framework to create dependent devices
platform/x86: intel_punit_ipc: Fix resource ioremap warning
platform/x86: dell-smo8800: remove redundant assignments to byte_data
platform/x86: hp-wmi: Fix tablet mode detection for convertibles
platform/x86: intel_ips: Convert timers to use timer_setup()
platform/x86: sony-laptop: Drop variable assignment in sony_nc_setup_rfkill()
platform/x86: sony-laptop: Fix error handling in sony_nc_setup_rfkill()
tools/wmi: add a sample for dell smbios communication over WMI
platform/x86: dell-smbios-wmi: introduce userspace interface
platform/x86: wmi: create userspace interface for drivers
platform/x86: dell-smbios: Add filtering support
platform/x86: dell-smbios-smm: test for WSMT
...
large change that introduces runtime PM support to the clk framework. Now we
properly call runtime PM operations on the device providing a clk when the clk
is in use. This helps on SoCs where the clks provided by a device need
something to be powered on before using the clks, like power domains or
regulators. It also helps power those things down when clks aren't in use. The
other core change is a devm API addition for clk providers so we can get rid of
a bunch of clk driver remove functions that are just doing
of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and smattering
of non-critical fixes to existing drivers. The biggest diff is support for
Mediatek MT2712 and MT7622 SoCs, but those patches really just add a bunch
of data.
By the way, we're trying something new here where we build the tree up with
topic branches. We plan to work this into our workflow so that we don't step
on each other's toes, and so the fixes branch can be merged on an as-needed
basis.
Core:
- Runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- Runtime PM support for Samsung exynos5433/exynos4412 providers
- Removal of clkdev aliases on Samsung SoCs
- Convert clk-gpio to use gpio descriptors
- Various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- Sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- Support for the second display unit clock on Renesas RZ/G1E
- Suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- New clock ids for Rockchip rk3188 and rk3368 SoCs
- Various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=hC7z
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have two changes to the core framework this time around.
The first being a large change that introduces runtime PM support to
the clk framework. Now we properly call runtime PM operations on the
device providing a clk when the clk is in use. This helps on SoCs
where the clks provided by a device need something to be powered on
before using the clks, like power domains or regulators. It also helps
power those things down when clks aren't in use.
The other core change is a devm API addition for clk providers so we
can get rid of a bunch of clk driver remove functions that are just
doing of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and
smattering of non-critical fixes to existing drivers. The biggest diff
is support for Mediatek MT2712 and MT7622 SoCs, but those patches
really just add a bunch of data.
By the way, we're trying something new here where we build the tree up
with topic branches. We plan to work this into our workflow so that we
don't step on each other's toes, and so the fixes branch can be merged
on an as-needed basis.
Summary:
Core:
- runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- runtime PM support for Samsung exynos5433/exynos4412 providers
- removal of clkdev aliases on Samsung SoCs
- convert clk-gpio to use gpio descriptors
- various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- support for the second display unit clock on Renesas RZ/G1E
- suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- new clock ids for Rockchip rk3188 and rk3368 SoCs
- various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
clk: stm32h7: fix test of clock config
clk: pxa: fix building on older compilers
clk: sunxi-ng: a83t: Fix i2c buses bits
clk: ti: dra7-atl-clock: fix child-node lookups
clk: qcom: common: fix legacy board-clock registration
clk: uniphier: fix DAPLL2 clock rate of Pro5
clk: uniphier: fix parent of miodmac clock data
clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
clk: hi3660: fix incorrect uart3 clock freqency
clk: kona-setup: Delete error messages for failed memory allocations
ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
clk: cdce925: remove redundant check for non-null parent_name
clk: versatile: Improve sizeof() usage
clk: versatile: Delete error messages for failed memory allocations
clk: ux500: Improve sizeof() usage
clk: ux500: Delete error messages for failed memory allocations
clk: spear: Delete error messages for failed memory allocations
clk: ti: Delete error messages for failed memory allocations
clk: mmp: Adjust checks for NULL pointers
...
Pull thermal management updates from Zhang Rui:
- introduce brcmstb AVS TMON thermal driver (Brian Norris)
- add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao)
- major rework on HISI driver plus additional support of hisi3660
(Daniel Lezcano)
- add nvmem-cells binding on imx6sx (Leonard Crestez)
- fix a NULL pointer dereference on ti thermal driver unloading (Tony
Lindgren)
- improve tmon tool to make it easier to cross-compile tmon (Markus
Mayer)
- add Coffee Lake and Cannon Lake support for intel processor and pch
thermal drivers (Srinivas Pandruvada)
- other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen
Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits)
thermal: pch: Add Cannon Lake support
thermal: int340x: processor_thermal: Add Coffee Lake support
thermal: int340x: processor_thermal: Add Cannon Lake support
thermal: bxt: remove redundant variable trip
thermal: cpu_cooling: pr_err() strings should end with newlines
thermal: add brcmstb AVS TMON driver
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal/drivers/hisi: Add support for hi3660 SoC
thermal/drivers/hisi: Prepare to add support for other hisi platforms
thermal/drivers/hisi: Add platform prefix to function name
thermal/drivers/hisi: Put platform code together
thermal/drivers/qcom-spmi: Use devm_iio_channel_get
thermal/drivers/generic-iio-adc: Switch tz request to devm version
thermal/drivers/step_wise: Fix temperature regulation misbehavior
thermal/drivers/hisi: Use round up step value
thermal/drivers/hisi: Move the clk setup in the corresponding functions
thermal/drivers/hisi: Remove mutex_lock in the code
thermal/drivers/hisi: Remove thermal data back pointer
thermal/drivers/hisi: Convert long to int
thermal/drivers/hisi: Rename and remove unused field
...
-----BEGIN PGP SIGNATURE-----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=fCeF
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking update from Jeff Layton:
"A couple of fixes for a patch that went into v4.14, and the bug report
just came in a few days ago.. It passes my (minimal) testing, and has
been in linux-next for a few days now.
I also would like to get my address changed in MAINTAINERS to clear
that hurdle"
* tag 'locks-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
fcntl: don't leak fd reference when fixup_compat_flock fails
MAINTAINERS: s/jlayton@poochiereds.net/jlayton@kernel.org/
Pull cramfs updates from Al Viro:
"Nicolas Pitre's cramfs work"
* 'work.cramfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cramfs: rehabilitate it
cramfs: add mmap support
cramfs: implement uncompressed and arbitrary data block positioning
cramfs: direct memory access support
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may be
required to satisfy a write fault to also be flushed ("on disk") before
the kernel returns to userspace from the fault handler. Effectively
every write-fault that dirties metadata completes an fsync() before
returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
type guarantees that the MAP_SYNC flag is validated as supported by the
filesystem's ->mmap() file operation.
* Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
enables interoperability with environments that only implement the
standardized methods.
* Add support for the ACPI 6.2 NVDIMM media error injection methods.
* Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
last shutdown status, firmware update, SMART error injection, and
SMART alarm threshold control.
* Cleanup physical address information disclosures to be root-only.
* Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
* Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
957ac8c421 dax: fix PMD faults on zero-length files
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
a39e596baa xfs: support for synchronous DAX faults
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
-----BEGIN PGP SIGNATURE-----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=h2vZ
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"Save for a few late fixes, all of these commits have shipped in -next
releases since before the merge window opened, and 0day has given a
build success notification.
The ext4 touches came from Jan, and the xfs touches have Darrick's
reviewed-by. An xfstest for the MAP_SYNC feature has been through
a few round of reviews and is on track to be merged.
- Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
'userspace flush' of persistent memory updates via filesystem-dax
mappings. It arranges for any filesystem metadata updates that may
be required to satisfy a write fault to also be flushed ("on disk")
before the kernel returns to userspace from the fault handler.
Effectively every write-fault that dirties metadata completes an
fsync() before returning from the fault handler. The new
MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
is validated as supported by the filesystem's ->mmap() file
operation.
- Add support for the standard ACPI 6.2 label access methods that
replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
This enables interoperability with environments that only implement
the standardized methods.
- Add support for the ACPI 6.2 NVDIMM media error injection methods.
- Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
latch last shutdown status, firmware update, SMART error injection,
and SMART alarm threshold control.
- Cleanup physical address information disclosures to be root-only.
- Fix revalidation of the DIMM "locked label area" status to support
dynamic unlock of the label area.
- Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
(system-physical-address) command and error injection commands.
Acknowledgements that came after the commits were pushed to -next:
- 957ac8c421 ("dax: fix PMD faults on zero-length files"):
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
- a39e596baa ("xfs: support for synchronous DAX faults") and
7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"
* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
acpi, nfit: add 'Enable Latch System Shutdown Status' command support
dax: fix general protection fault in dax_alloc_inode
dax: fix PMD faults on zero-length files
dax: stop requiring a live device for dax_flush()
brd: remove dax support
dax: quiet bdev_dax_supported()
fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
tools/testing/nvdimm: unit test clear-error commands
acpi, nfit: validate commands against the device type
tools/testing/nvdimm: stricter bounds checking for error injection commands
xfs: support for synchronous DAX faults
xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
ext4: Support for synchronous DAX faults
ext4: Simplify error handling in ext4_dax_huge_fault()
dax: Implement dax_finish_sync_fault()
dax, iomap: Add support for synchronous faults
mm: Define MAP_SYNC and VM_SYNC flags
dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
dax: Allow dax_iomap_fault() to return pfn
dax: Fix comment describing dax_iomap_fault()
...
-----BEGIN PGP SIGNATURE-----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=enGU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma maintainership update from Doug Ledford:
"Add Jason Gunthorpe as co-maintainer of the RDMA stack.
The change is simply to add Jason Gunthorpe to the MAINTAINERS file
for the RDMA stack (and update him in the .mailmap). Jason and I have
talked offline, and Jason will be filing a ticket with the k.o
helpdesk to get an account on k.o, and then we will likely move the
rdma tree to an area where we can both access it and use a shared repo
+ individual topic branches + merged up for-next branch as the staging
basis for each release.
Timing here is nice because in the US we are headed into a holiday
period whereas Jason will be around to keep the patch flow progressing
(I guess Canadians do their equivalent to Thanksgiving in October, so
he doesn't have an excuse to ignore email for the next week ;-))"
[ .. and Konstantin already got Jason his kernel.org account between the
pull request and this actual pull - Linus ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
RDMA: Add Jason Gunthorpe as a co-maintainer
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJaDggbAAoJEGCrR//JCVInIeQQAN1MDyO1UaWiFYnbkVOgzFcj
dqbFOc41DBE/90JoBWE8kR/rjyF83OqztiaYpx9viu2qMMBZVcOwxhCUthWK59c/
IujYdw4zGevLscF+jdrLbXgk97nfaWebsHyTAF307WAdZVJxiVGGzQEcgm71d6Zp
CXjLiUii4winHUMK9FLRY2st0HKAevXhuvZJVV432+sTg3p7fGVilYeGOL5G62WO
zQfCisqzC5q677kGGyUlPRGlHWMPkllsTTnfXcmV/FUiGyVa3lUWY5sEu+wCl96O
U1ffPENeNj/A/4fa1dbErtbiNnC2z/+jf+Dg7Cn8w/dPk4Suf0ppjP8RqIGyxmDl
Wm/UxbwDClxaeF4GSaYh2yKgGRJMH5N87bJnZRINE5ccGiol8Ww/34bFG0xNnfyh
jSAFAc318AFG62WD4lvqWc7LSpzOYxp/MNqIFXKN692St/MJLkx8/q0nTwY1qPY0
3SELz9II3hz+3MfDRqtRi7hZpkgHgQ+UG7S5+Xhmqrl309GOEldCjPVJhhXxWoxK
ZPtZOuyYvGhIC+YAnHaN6lUjADIdNJZHwbuXFImx85oKHVofoxHbcni5vk8Uu7z1
sQNYOtdDGaPG/2u9RJdJlPg/jIgLKxxt/Xm9TYVawpZ5hFANhBTtIq5ExCRAil68
j9sMOrpZ1DzCQyR7zN2v
=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
We add device tree files for a couple of additional SoCs in various areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking,
Amlogic A113D for audio, and Renesas R-Car V3M for automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic
and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues that
the latest version of 'dtc' now warns about. Unfortunately there is still
a lot left to do.
A rework of the ARM foundation model introduced several new files
for common variations of the model.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TnSo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"We add device tree files for a couple of additional SoCs in various
areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
networking, Amlogic A113D for audio, and Renesas R-Car V3M for
automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
Amlogic and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues
that the latest version of 'dtc' now warns about. Unfortunately there
is still a lot left to do.
A rework of the ARM foundation model introduced several new files for
common variations of the model"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
dt-bindings: bus: Add documentation for the Technologic Systems NBUS
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
...
Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are
OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now
with a Quad-Core ARM Cortex-A7. According to the manufacturer,
it is intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family
of chips meant for managed gigabit ethernet switches, based
around a Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2
and Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jlJ2
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are OMAP,
Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now with a
Quad-Core ARM Cortex-A7. According to the manufacturer, it is
intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
chips meant for managed gigabit ethernet switches, based around a
Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
ARM: meson: Add SMP bringup code for Meson8 and Meson8b
ARM: smp_scu: allow the platform code to read the SCU CPU status
ARM: smp_scu: add a helper for powering on a specific CPU
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: defconfig: select the right SX150X driver
arm64: defconfig: Enable QCOM_IOMMU
arm64: Add ThunderX drivers to defconfig
arm64: defconfig: Enable Tegra PCI controller
cpufreq: imx6q: Move speed grading check to cpufreq driver
arm64: defconfig: re-enable Qualcomm DB410c USB
ARM: configs: stm32: Add MDMA support in STM32 defconfig
ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJaDdh4AAoJELDendYovxMvPFAH/2QjTys2ydIAdmwke4odpJ7U
xuy7HOQCzOeZ5YsZthzCBsN90VmnDM7X7CcB8weSdjcKlXMSAWD+J1RgkL2iAJhI
8tzIEXECrlNuz4V5mX9TmMgtPCr4qzU3fsts0pZy4fYDq1PVWDefqOwEtbpbWabb
wRSMq/nTb9iASTMgheSC0WfhJneqtJ+J20zrzkGPCBPRFcwfppeP8/7vpkmJslBi
eH/pfchICM4w093T/BfavnsPvhLdjgRuwVzn6+e46s4tLnZAxnLRVQ7SXZXzBORq
/dL/qC0XH3YXdU+XfIs//giZsmLns6SxZaMr4vs6TxFtuzZBKpLtkOKo9zndvxk=
=sZY5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen features and fixes for v4.15-rc1
Apart from several small fixes it contains the following features:
- a series by Joao Martins to add vdso support of the pv clock
interface
- a series by Juergen Gross to add support for Xen pv guests to be
able to run on 5 level paging hosts
- a series by Stefano Stabellini adding the Xen pvcalls frontend
driver using a paravirtualized socket interface"
* tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits)
xen/pvcalls: fix potential endless loop in pvcalls-front.c
xen/pvcalls: Add MODULE_LICENSE()
MAINTAINERS: xen, kvm: track pvclock-abi.h changes
x86/xen/time: setup vcpu 0 time info page
x86/xen/time: set pvclock flags on xen_time_init()
x86/pvclock: add setter for pvclock_pvti_cpu0_va
ptp_kvm: probe for kvm guest availability
xen/privcmd: remove unused variable pageidx
xen: select grant interface version
xen: update arch/x86/include/asm/xen/cpuid.h
xen: add grant interface version dependent constants to gnttab_ops
xen: limit grant v2 interface to the v1 functionality
xen: re-introduce support for grant v2 interface
xen: support priv-mapping in an HVM tools domain
xen/pvcalls: remove redundant check for irq >= 0
xen/pvcalls: fix unsigned less than zero error check
xen/time: Return -ENODEV from xen_get_wallclock()
xen/pvcalls-front: mark expected switch fall-through
xen: xenbus_probe_frontend: mark expected switch fall-throughs
xen/time: do not decrease steal time after live migration on xen
...
As was discussed in September and October, add Jason along with
Doug to have a team maintainership model for the RDMA subystem.
Mellanox Technologies will be funding Jason's independent work on
the maintainership.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
kernel cycle:
Core:
- The pin control Kconfig entry PINCTRL is now turned into
a menuconfig option. This obviously has the implication of
making the subsystem menu visible in menuconfig. This is
happening because of two things:
- Intel have started to deploy and depend on pin controllers
in a way that is affecting users directly. This happens
on the highly integrated laptop chipsets named after
geographical places: baytrail, broxton, cannonlake,
cedarfork, cherryview, denverton, geminilake, lewisburg,
merrifield, sunrisepoint... It started a while back and
now it is ever more evident that this is crucial
infrastructure for x86 laptops and not an embedded
obscurity anymore. Users need to be aware.
- Pin control expanders on I2C and SPI that are
arch-agnostic. Currently Semtech SX150X and Microchip
MCP28x08 but more are expected. Users will have to be
able to configure these in directly for their set-up.
- Just go and select GPIOLIB now that we made sure that
GPIOLIB is a very vanilla subsystem. Do not depend on
it, if we need it, select it.
- Exposing the pin control subsystem in menuconfig uncovered
a bunch of obscure bugs that are now hopefully fixed,
all more or less pertaining to Blackfin.
- Unified namespace for cross-calls between pin control and
GPIO.
- New support for clock skew/delay generic DT bindings
and generic pin config options for this.
- Minor documentation improvements.
Various:
- The Renesas SH-PFC pin controller has evolved a lot. It seems
Renesas are churning out new SoCs by the minute.
- A bunch of non-critical fixes for the Rockchip driver.
- Improve the use of library functions instead of open coding.
- Support the MCP28018 variant in the MCP28x08 driver.
- Static constifying.
-----BEGIN PGP SIGNATURE-----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=kj/b
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.15 kernel cycle:
Core:
- The pin control Kconfig entry PINCTRL is now turned into a
menuconfig option. This obviously has the implication of making the
subsystem menu visible in menuconfig. This is happening because of
two things:
(a) Intel have started to deploy and depend on pin controllers in
a way that is affecting users directly. This happens on the
highly integrated laptop chipsets named after geographical
places: baytrail, broxton, cannonlake, cedarfork, cherryview,
denverton, geminilake, lewisburg, merrifield, sunrisepoint...
It started a while back and now it is ever more evident that
this is crucial infrastructure for x86 laptops and not an
embedded obscurity anymore. Users need to be aware.
(b) Pin control expanders on I2C and SPI that are arch-agnostic.
Currently Semtech SX150X and Microchip MCP28x08 but more are
expected. Users will have to be able to configure these in
directly for their set-up.
- Just go and select GPIOLIB now that we made sure that GPIOLIB is a
very vanilla subsystem. Do not depend on it, if we need it, select
it.
- Exposing the pin control subsystem in menuconfig uncovered a bunch
of obscure bugs that are now hopefully fixed, all more or less
pertaining to Blackfin.
- Unified namespace for cross-calls between pin control and GPIO.
- New support for clock skew/delay generic DT bindings and generic
pin config options for this.
- Minor documentation improvements.
Various:
- The Renesas SH-PFC pin controller has evolved a lot. It seems
Renesas are churning out new SoCs by the minute.
- A bunch of non-critical fixes for the Rockchip driver.
- Improve the use of library functions instead of open coding.
- Support the MCP28018 variant in the MCP28x08 driver.
- Static constifying"
* tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
pinctrl: gemini: Fix missing pad descriptions
pinctrl: Add some depends on HAS_IOMEM
pinctrl: samsung/s3c24xx: add CONFIG_OF dependency
pinctrl: gemini: Fix GMAC groups
pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support
pinctrl: ti-iodelay: remove redundant unused variable dev
pinctrl: max77620: Use common error handling code in max77620_pinconf_set()
pinctrl: gemini: Implement clock skew/delay config
pinctrl: gemini: Use generic DT parser
pinctrl: Add skew-delay pin config and bindings
pinctrl: armada-37xx: Add edge both type gpio irq support
pinctrl: uniphier: remove eMMC hardware reset pin-mux
pinctrl: rockchip: Add iomux-route switching support for rk3288
pinctrl: intel: Add Intel Cedar Fork PCH pin controller support
pinctrl: intel: Make offset to interrupt status register configurable
pinctrl: sunxi: Enforce the strict mode by default
pinctrl: sunxi: Disable strict mode for old pinctrl drivers
pinctrl: sunxi: Introduce the strict flag
pinctrl: sh-pfc: Save/restore registers for PSCI system suspend
pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description
...
Here is the big set of char/misc and other driver subsystem patches for
4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when
merging to your tree as one lkdtm patch came in through the perf tree as
well as this one. The resolution is to take the const change that this
tree provides.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a
sBi6WS87In5v1QO1Rgfc
=dH2a
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem patches
for 4.15-rc1.
There are small changes all over here, hyperv driver updates, pcmcia
driver updates, w1 driver updats, vme driver updates, nvmem driver
updates, and lots of other little one-off driver updates as well. The
shortlog has the full details.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
VME: Return -EBUSY when DMA list in use
w1: keep balance of mutex locks and refcnts
MAINTAINERS: Update VME subsystem tree.
nvmem: sunxi-sid: add support for A64/H5's SID controller
nvmem: imx-ocotp: Update module description
nvmem: imx-ocotp: Enable i.MX7D OTP write support
nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
nvmem: imx-ocotp: Add support for banked OTP addressing
nvmem: imx-ocotp: Pass parameters via a struct
nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
nvmem: uniphier: add UniPhier eFuse driver
dt-bindings: nvmem: add description for UniPhier eFuse
nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
nvmem: qfprom: fix different address space warnings of sparse
nvmem: mtk-efuse: fix different address space warnings of sparse
nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
thunderbolt: tb: fix use after free in tb_activate_pcie_devices
MAINTAINERS: Add git tree for Thunderbolt development
...
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaC/4EAAoJEAhfPr2O5OEVQnsP/2JNpdLuzgwNp0p2gXrvK5pl
KOsA6Fld6RNmpuel8eHARbbDTPKF1Y1bvYXVo7lPhXb7KuM2IzG56VxoNech/5pX
eflKwnpV/Ns/ZMLYue7Rqdw0iZnjWESBWf5lzg9MvzwhZBaPlRwqu/aOJy360AZr
FnjKHtU/6WUIOCB8r0qLBDR/epoh7y2lKfjDTcEBrURrFEsTajdyd59npdMSIQqO
iUeeBVEIUKyytYDQNM/VOsBnh0G+2inLuykF8Nd6pYs8O0iUEUpZYwdGuwGUG1HB
VmCcRGU62efl5nu8zQMPnwAvjXwZAh8vbS0ha+B1vBJh1RwNVUz0kKIKEgAaOMZ3
zZa3NLfDP4cHgYtr2Xw2vSvJvDwQecmiItJKeZ/Id4cPy03TKEV1KEaHCQJHwbDn
RP/o9C+5gagMO/oIvZPQ+esVZXQ4prAzOdX53N7HPn4Wn+k4clkI0+hMvMGf67mo
EYOguCqbN2D0e11BLiPP1bRbGZRSI8I9xcKuhcw4ajJHbRRkrjl8EW7V6c8CuMkd
0Wj5oidFleJ0Vy+qQOPqXN1FwR7AbHNtI38JfWNz324AIrFCQERpfXVmKwRPZfl4
YXgGIA9fil3a01YJCtxc0PsXlRkveKJ8hKCLpjXbjNTh1oSbgrDxx5sMx9PO6WqJ
VOb6fL17rwTXlKV/GeU/
=d9nT
-----END PGP SIGNATURE-----
Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Documentation for digital TV (both kAPI and uAPI) are now in sync
with the implementation (except for legacy/deprecated ioctls). This
is a major step, as there were always a gap there
- New sensor driver: imx274
- New cec driver: cec-gpio
- New platform driver for rockship rga and tegra CEC
- New RC driver: tango-ir
- Several cleanups at atomisp driver
- Core improvements for RC, CEC, V4L2 async probing support and DVB
- Lots of drivers cleanup, fixes and improvements.
* tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits)
dvb_frontend: don't use-after-free the frontend struct
media: dib0700: fix invalid dvb_detach argument
media: v4l2-ctrls: Don't validate BITMASK twice
media: s5p-mfc: fix lockdep warning
media: dvb-core: always call invoke_release() in fe_free()
media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep
media: au0828: make const array addr_list static
media: cx88: make const arrays default_addr_list and pvr2000_addr_list static
media: drxd: make const array fastIncrDecLUT static
media: usb: fix spelling mistake: "synchronuously" -> "synchronously"
media: ddbridge: fix build warnings
media: av7110: avoid 2038 overflow in debug print
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: v4l: async: fix unregister for implicitly registered sub-device notifiers
media: v4l: async: fix return of unitialized variable ret
media: imx274: fix missing return assignment from call to imx274_mode_regs
media: camss-vfe: always initialize reg at vfe_set_xbar_cfg()
media: atomisp: make function calls cleaner
media: atomisp: get rid of storage_class.h
media: atomisp: get rid of wrong stddef.h include
...
Merge updates from Andrew Morton:
- a few misc bits
- ocfs2 updates
- almost all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
memory hotplug: fix comments when adding section
mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
mm: simplify nodemask printing
mm,oom_reaper: remove pointless kthread_run() error check
mm/page_ext.c: check if page_ext is not prepared
writeback: remove unused function parameter
mm: do not rely on preempt_count in print_vma_addr
mm, sparse: do not swamp log with huge vmemmap allocation failures
mm/hmm: remove redundant variable align_end
mm/list_lru.c: mark expected switch fall-through
mm/shmem.c: mark expected switch fall-through
mm/page_alloc.c: broken deferred calculation
mm: don't warn about allocations which stall for too long
fs: fuse: account fuse_inode slab memory as reclaimable
mm, page_alloc: fix potential false positive in __zone_watermark_ok
mm: mlock: remove lru_add_drain_all()
mm, sysctl: make NUMA stats configurable
shmem: convert shmem_init_inodecache() to void
Unify migrate_pages and move_pages access checks
mm, pagevec: rename pagevec drained field
...
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma
-----BEGIN PGP SIGNATURE-----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=A1oL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is a fairly plain pull request. Lots of driver updates across the
stack, a huge number of static analysis cleanups including a close to
50 patch series from Bart Van Assche, and a number of new features
inside the stack such as general CQ moderation support.
Nothing really stands out, but there might be a few conflicts as you
take things in. In particular, the cleanups touched some of the same
lines as the new timer_setup changes.
Everything in this pull request has been through 0day and at least two
days of linux-next (since Stephen doesn't necessarily flag new
errors/warnings until day2). A few more items (about 30 patches) from
Intel and Mellanox showed up on the list on Tuesday. I've excluded
those from this pull request, and I'm sure some of them qualify as
fixes suitable to send any time, but I still have to review them
fully. If they contain mostly fixes and little or no new development,
then I will probably send them through by the end of the week just to
get them out of the way.
There was a break in my acceptance of patches which coincides with the
computer problems I had, and then when I got things mostly back under
control I had a backlog of patches to process, which I did mostly last
Friday and Monday. So there is a larger number of patches processed in
that timeframe than I was striving for.
Summary:
- Add iWARP support to qedr driver
- Lots of misc fixes across subsystem
- Multiple update series to hns roce driver
- Multiple update series to hfi1 driver
- Updates to vnic driver
- Add kref to wait struct in cxgb4 driver
- Updates to i40iw driver
- Mellanox shared pull request
- timer_setup changes
- massive cleanup series from Bart Van Assche
- Two series of SRP/SRPT changes from Bart Van Assche
- Core updates from Mellanox
- i40iw updates
- IPoIB updates
- mlx5 updates
- mlx4 updates
- hns updates
- bnxt_re fixes
- PCI write padding support
- Sparse/Smatch/warning cleanups/fixes
- CQ moderation support
- SRQ support in vmw_pvrdma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits)
RDMA/core: Rename kernel modify_cq to better describe its usage
IB/mlx5: Add CQ moderation capability to query_device
IB/mlx4: Add CQ moderation capability to query_device
IB/uverbs: Add CQ moderation capability to query_device
IB/mlx5: Exposing modify CQ callback to uverbs layer
IB/mlx4: Exposing modify CQ callback to uverbs layer
IB/uverbs: Allow CQ moderation with modify CQ
iw_cxgb4: atomically flush the qp
iw_cxgb4: only call the cq comp_handler when the cq is armed
iw_cxgb4: Fix possible circular dependency locking warning
RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion
IB/core: Only maintain real QPs in the security lists
IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey
RDMA/core: Make function rdma_copy_addr return void
RDMA/vmw_pvrdma: Add shared receive queue support
RDMA/core: avoid uninitialized variable warning in create_udata
RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs
RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP
RDMA/bnxt_re: Set QP state in case of response completion errors
RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries
...
Pull cgroup updates from Tejun Heo:
"Cgroup2 cpu controller support is finally merged.
- Basic cpu statistics support to allow monitoring by default without
the CPU controller enabled.
- cgroup2 cpu controller support.
- /sys/kernel/cgroup files to help dealing with new / optional
features"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: export list of cgroups v2 features using sysfs
cgroup: export list of delegatable control files using sysfs
cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
MAINTAINERS: relocate cpuset.c
cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
sched: Implement interface for cgroup unified hierarchy
sched: Misc preps for cgroup unified hierarchy interface
sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
cgroup: statically initialize init_css_set->dfl_cgrp
cgroup: Implement cgroup2 basic CPU usage accounting
cpuacct: Introduce cgroup_account_cputime[_field]()
sched/cputime: Expose cputime_adjust()
Pull networking updates from David Miller:
"Highlights:
1) Maintain the TCP retransmit queue using an rbtree, with 1GB
windows at 100Gb this really has become necessary. From Eric
Dumazet.
2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.
3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
Lunn.
4) Add meter action support to openvswitch, from Andy Zhou.
5) Add a data meta pointer for BPF accessible packets, from Daniel
Borkmann.
6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.
7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.
8) More work to move the RTNL mutex down, from Florian Westphal.
9) Add 'bpftool' utility, to help with bpf program introspection.
From Jakub Kicinski.
10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
Dangaard Brouer.
11) Support 'blocks' of transformations in the packet scheduler which
can span multiple network devices, from Jiri Pirko.
12) TC flower offload support in cxgb4, from Kumar Sanghvi.
13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
Leitner.
14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.
15) Add RED qdisc offloadability, and use it in mlxsw driver. From
Nogah Frankel.
16) eBPF based device controller for cgroup v2, from Roman Gushchin.
17) Add some fundamental tracepoints for TCP, from Song Liu.
18) Remove garbage collection from ipv6 route layer, this is a
significant accomplishment. From Wei Wang.
19) Add multicast route offload support to mlxsw, from Yotam Gigi"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
tcp: highest_sack fix
geneve: fix fill_info when link down
bpf: fix lockdep splat
net: cdc_ncm: GetNtbFormat endian fix
openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
netem: remove unnecessary 64 bit modulus
netem: use 64 bit divide by rate
tcp: Namespace-ify sysctl_tcp_default_congestion_control
net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
ipv6: set all.accept_dad to 0 by default
uapi: fix linux/tls.h userspace compilation error
usbnet: ipheth: prevent TX queue timeouts when device not ready
vhost_net: conditionally enable tx polling
uapi: fix linux/rxrpc.h userspace compilation errors
net: stmmac: fix LPI transitioning for dwmac4
atm: horizon: Fix irq release error
net-sysfs: trigger netlink notification on ifalias change via sysfs
openvswitch: Using kfree_rcu() to simplify the code
openvswitch: Make local function ovs_nsh_key_attr_size() static
openvswitch: Fix return value check in ovs_meter_cmd_features()
...
Plenty of acronym soup here:
- Initial support for the Scalable Vector Extension (SVE)
- Improved handling for SError interrupts (required to handle RAS events)
- Enable GCC support for 128-bit integer types
- Remove kernel text addresses from backtraces and register dumps
- Use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- Perf PMU driver for the Statistical Profiling Extension (SPE)
- Perf PMU driver for Hisilicon's system PMUs
- Misc cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJaCcLqAAoJELescNyEwWM0JREH/2FbmD/khGzEtP8LW+o9D8iV
TBM02uWQxS1bbO1pV2vb+512YQO+iWfeQwJH9Jv2FZcrMvFv7uGRnYgAnJuXNGrl
W+LL6OhN22A24LSawC437RU3Xe7GqrtONIY/yLeJBPablfcDGzPK1eHRA0pUzcyX
VlyDruSHWX44VGBPV6JRd3x0vxpV8syeKOjbRvopRfn3Nwkbd76V3YSfEgwoTG5W
ET1sOnXLmHHdeifn/l1Am5FX1FYstpcd7usUTJ4Oto8y7e09tw3bGJCD0aMJ3vow
v1pCUWohEw7fHqoPc9rTrc1QEnkdML4vjJvMPUzwyTfPrN+7uEuMIEeJierW+qE=
=0qrg
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
This tag contains the core RISC-V Linux port, which has been through
nine rounds of review on various mailing lists. The port is not
complete: there's some cleanup patches moving through the review
process, a whole bunch of drivers that need some work, and a lot of
feature additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly lingering
user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core architecture code
out from our drivers and would like to submit this patch set to be included
into linux-next, with the goal being to be merged in during the next merge
window. This patch set is based on 4.14-rc2, but if it's better to have it
based on something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so while it builds
an nominally boots, you can't print or take an interrupt so it's not that
useful. If you're looking to actually boot a system it would probably be
better to use the full patch set listed below.
We've collected a handful of tags from reviewers, and the remainder of the
patch set only got minimal feedback last time. Here's what changed:
* We now use the device tree to initialize the timer driver so it's less
tighly coupled with the arch port.
* I cleaned up the defconfigs -- there's actually now just one, and it's
empty. For now I think we're OK with what the kernel sets as defaults, but
I anticipate we'll begin to expand this as people start to use the port
more.
* The VDSO symbols version is sane.
* We WFI while spinning in the boot loop.
* A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set, we've started to
get enough interest from various users and contributors that maintaining an out
of tree patch set is starting to become a big burden. Hopefully the patches
are good enough to merge now, which will at least get everyone working in a
more reasonable manner as we clean up the remaining issues.
This patch set is also availiable on github
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
as is the entire patch set necessary to get a more functional RISC-V system up
and running, including a handful of patches that aren't ready for upstream yet.
https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
Hopefully I've managed to get everyone's feedback
Here's the change highlights from the whole patch set:
(v8) I know it may not be the ideal time to submit a patch set right now, as
it's the middle of the merge window, but things have calmed down quite a bit in
the last month so I thought it would be good to get everyone on the same page.
There's been a handful of changes since the last patch set, but most of them
are fairly minor:
* We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
systems. This is user configurable, as it triggers a different code model
that generates slightly less efficient code.
* The device tree binding documentation is back, I'd managed to lose it at some
point.
* We now pass the atomic64 test suite. The SBI timer driver has been
* refactored.
(v7) It's been a while since my last patch set, but the changes han been fairly
minimal:
* The PCI cleanup patches have been dropped, we'll do them as a separate patch
set later.
* We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
grep easier.
* There have been a handful of memory model related tweaks in I/O land,
particularly relating the PCI and the upcoming platform specification.
There are significant comments in the relevant files. This is still a WIP,
but I think we're close to getting as good as we're going to get until we
end up with some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are pretty
minimal:
* The patch set is now based on linux-next/master, which I believe is a better
base now that we're getting closer to upstream.
* EARLY_PRINTK is no longer an option. Since the SBI console is reasonable,
there's no penalty to enabling it (and thus no benefit to disabling it).
* The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly similar to the
v4 patch set. The most interesting changes include:
* We've moved back to a single patch set.
* SMP support has been fixed, I was accidentally running on a non-SMP
configuration. There were various mistakes all over the tree as a result of
this.
* The cmpxchg syscalls have been removed, as they were deemed a bad idea. As
a result, RISC-V Linux systems mandate the A extension. The corresponding
Kconfig entry to enable builds on non-A systems has been removed.
* A few more atomic fixes: mostly fence changes, but those resulted in a
handful of additional macros that were no longer necessary.
* riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
* The cmpxchg64 syscall is no longer enabled on 32-bit systems. It's not
possible to provide this on SMP systems, and it's not necessary as glibc
knows not to call it.
* We provide a ELF_HWCAP so users can determine the ISA of the machine the
kernel is running on.
* The multi-line comments are in a better form.
* There were a handful of headers that could be replaced with the asm-generic
versions, and a few unnecessary definitions.
* We no longer use printk, but instead use pr_*.
* A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
* We've split out all our drivers into separate patch sets, which I've already
sent out to the relevant maintainers. I haven't included those patches in
this patch set, but some of them are necessary to build our port. A git
tree that contains all our patch sets merged together lives at
<https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
* The patch set is now split up differently: rather than being split per
directory it is split per topic. Hopefully this will make it easier to
review the port on the mailing list. The split is a bit rough, so you
probably still want to look at the patch set as a whole.
* atomic.h has been completely rewritten and is hopefully now correct. I've
attempted to sanitize the various other memory model related code as well,
and I think it should all be sane now aside from a handful of FIXMEs
commented in the code.
* We've changed the cmpexchg syscall to always exist and to not be
multiplexed. There is also a VDSO entry for compare and exchange, which
allows kernels with the A extension to execute user code without the A
extension reasonably fast.
* Our user-visible register state now contains enough space for the Q
extension for 128-bit floating point, as well as a few words to allow
extensibility to future ISA extensions like the eventual V extension for
vectors.
* A handful of driver cleanups, but these have been split into separate patch
sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
* We've split out our drivers into the right places, which means now there's
a lot more patches. I'll be submitting these patches to various subsystem
maintainers and including them in any future RISC-V patch sets until
they've been merged.
* The SBI console driver has been completely rewritten to use the HVC helpers
and is now significantly smaller.
* We've begun to use weaker barriers as opposed to just the big "fence".
There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
* We now have thread_info in task_struct. As a result, sscratch now contains
TP instead of SP. This was necessary because thread_info is no longer on
the stack.
* A few shared routines have been added that we use instead of creating
another arch copy.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAloLD8sTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQbCZEAC2IgWFOAhYDIv4s39jC/iuGcofuuwC
atTVgKSM8tUES5wBomoVxRH1yjDvmyb2jeq3gsp6gWPcchUpLMdfwf2MwW3NV3Mw
ESCZPwYiuFhORh1Jt5RSespjK+V9qMvCW0iU6cPE/9kAlPfMGGDv2vEttOFgOGEm
yVb1i0gHBcdzbw5H0xszBionUAQVXOFqkfO8AW8VPtFMdzZB6t9OBXRgHJLdWgmK
2Zr5pFN75uivNh4RI1KXHpUeD1kLRVICzG7Ak/aQCfKxWsJutFI1dnLFZmFOIoTf
2wgW4KsDsZakcA9rILtfo3SFH+mSD5PWzvv5G44yf9sEkGG9bSgxl29GeJYL7NzG
3Da9FVMvzjIhmxamPGHfFOFTxTud9+6GU6Lj0iBLpHzpcttjhNgE2NXzcY8r1uMD
BcSwkK3duybjeiZLpwnxOywZidCQDv6pZYyc50WBtV/oUG1fncj8DT2ZTIqGv1V8
L6D/MXSr1jt9oJeWzfDCxHlaGaHL6grrmyJ8L1tQKPjMp+DbBPFbMLfvbn/dlsat
mPqmfQZ4zydOVO53k6KiHozGQh6K+cuXMvNxrb9pCRy3etFV2wfTNxtbdeJSa7gj
xarC6vSia8KFVyXp5nydSks5woHGJFQ1kQYSLEORUWiL5zWILbtI6POzOZeYHgej
BvTzVq0AVIbxjA==
=xDIk
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V architecture support from Palmer Dabbelt:
"This contains the core RISC-V Linux port, which has been through nine
rounds of review on various mailing lists. The port is not complete:
there's some cleanup patches moving through the review process, a
whole bunch of drivers that need some work, and a lot of feature
additions that will be needed.
The patches contained in this tag have been through nine rounds of
review on the various mailing lists. I have some outstanding cleanup
patches, but since there's been so much review on these patches I
thought it would be best to submit them as-is and then submit explicit
cleanup patches so everyone can review them. This first patch set is
big enough that it's a bit of a pain to constantly rewrite, and it's
caused a few headaches with various contributors.
The port is definately a work in progress. While what's there builds
and boots with 4.14, it's a bit hard to actually see anything happen
because there are no device drivers yet. I maintain a staging branch
that contains all the device drivers and cleanup that actually works,
but those patches won't all be ready for a while. I'd like to get what
we currently have into your tree so everyone can start working from a
single base -- of particular importance is allowing the glibc
upstreaming process to proceed so we can sort out any possibly
lingering user-visible ABI problems we might have.
Copied below is the ChangeLog that contains the history of this patch
set:
(v9) As per suggestions on our v8 patch set, I've split the core
architecture code out from our drivers and would like to submit
this patch set to be included into linux-next, with the goal
being to be merged in during the next merge window. This patch
set is based on 4.14-rc2, but if it's better to have it based on
something else then I can change it around.
This patch set contains just the core arch code for RISC-V, so
while it builds an nominally boots, you can't print or take an
interrupt so it's not that useful. If you're looking to actually
boot a system it would probably be better to use the full patch
set listed below.
We've collected a handful of tags from reviewers, and the
remainder of the patch set only got minimal feedback last time.
Here's what changed:
- We now use the device tree to initialize the timer driver so
it's less tighly coupled with the arch port.
- I cleaned up the defconfigs -- there's actually now just one,
and it's empty. For now I think we're OK with what the kernel
sets as defaults, but I anticipate we'll begin to expand this
as people start to use the port more.
- The VDSO symbols version is sane.
- We WFI while spinning in the boot loop.
- A handful of comments have been added.
While there are still a handful of FIXMEs in this patch set,
we've started to get enough interest from various users and
contributors that maintaining an out of tree patch set is
starting to become a big burden. Hopefully the patches are good
enough to merge now, which will at least get everyone working in
a more reasonable manner as we clean up the remaining issues.
(v8) I know it may not be the ideal time to submit a patch set right
now, as it's the middle of the merge window, but things have
calmed down quite a bit in the last month so I thought it would
be good to get everyone on the same page. There's been a handful
of changes since the last patch set, but most of them are fairly
minor:
- We changed PAGE_OFFSET to allowing mapping more physical
memory on 64-bit systems. This is user configurable, as it
triggers a different code model that generates slightly less
efficient code.
- The device tree binding documentation is back, I'd managed to
lose it at some point.
- We now pass the atomic64 test suite
- The SBI timer driver has been refactored.
(v7) It's been a while since my last patch set, but the changes han
been fairly minimal:
- The PCI cleanup patches have been dropped, we'll do them as a
separate patch set later.
- We've the Kconfig entries from CONFIG_ISA_* to
CONFIG_RISCV_ISA_*, to make grep easier.
- There have been a handful of memory model related tweaks in
I/O land, particularly relating the PCI and the upcoming
platform specification. There are significant comments in the
relevant files. This is still a WIP, but I think we're close
to getting as good as we're going to get until we end up with
some more specifications.
(v6) As it's been only a day since the v5 patch set, the changes are
pretty minimal:
- The patch set is now based on linux-next/master, which I
believe is a better base now that we're getting closer to
upstream.
- EARLY_PRINTK is no longer an option. Since the SBI console is
reasonable, there's no penalty to enabling it (and thus no
benefit to disabling it).
- The mmap syscalls were refactored a bit.
(v5) Things have really started to calm down, so this is fairly
similar to the v4 patch set. The most interesting changes
include:
- We've moved back to a single patch set.
- SMP support has been fixed, I was accidentally running on a
non-SMP configuration. There were various mistakes all over
the tree as a result of this.
- The cmpxchg syscalls have been removed, as they were deemed a
bad idea. As a result, RISC-V Linux systems mandate the A
extension. The corresponding Kconfig entry to enable builds
on non-A systems has been removed.
- A few more atomic fixes: mostly fence changes, but those
resulted in a handful of additional macros that were no
longer necessary.
- riscv_early_sie has been removed.
(v4) There have only been a few changes since the v3 patch set:
- The cmpxchg64 syscall is no longer enabled on 32-bit systems.
It's not possible to provide this on SMP systems, and it's
not necessary as glibc knows not to call it.
- We provide a ELF_HWCAP so users can determine the ISA of the
machine the kernel is running on.
- The multi-line comments are in a better form.
- There were a handful of headers that could be replaced with
the asm-generic versions, and a few unnecessary definitions.
- We no longer use printk, but instead use pr_*.
- A few Kconfig and defconfig entries have been cleaned up.
(v3) A highlight of the changes since the v2 patch set includes:
- We've split out all our drivers into separate patch sets,
which I've already sent out to the relevant maintainers. I
haven't included those patches in this patch set, but some of
them are necessary to build our port.
- The patch set is now split up differently: rather than being
split per directory it is split per topic. Hopefully this
will make it easier to review the port on the mailing list.
The split is a bit rough, so you probably still want to look
at the patch set as a whole.
- atomic.h has been completely rewritten and is hopefully now
correct. I've attempted to sanitize the various other memory
model related code as well, and I think it should all be sane
now aside from a handful of FIXMEs commented in the code.
- We've changed the cmpexchg syscall to always exist and to not
be multiplexed. There is also a VDSO entry for compare and
exchange, which allows kernels with the A extension to
execute user code without the A extension reasonably fast.
- Our user-visible register state now contains enough space for
the Q extension for 128-bit floating point, as well as a few
words to allow extensibility to future ISA extensions like
the eventual V extension for vectors.
- A handful of driver cleanups, but these have been split into
separate patch sets now so I won't duplicate them here.
(v2) A highlight of the changes since the v1 patch set includes:
- We've split out our drivers into the right places, which
means now there's a lot more patches. I'll be submitting
these patches to various subsystem maintainers and including
them in any future RISC-V patch sets until they've been
merged.
- The SBI console driver has been completely rewritten to use
the HVC helpers and is now significantly smaller.
- We've begun to use weaker barriers as opposed to just the big
"fence". There's still some work to do here, specifically:
- We need fences in the relaxed MMIO functions.
- The non-relaxed MMIO functions are missing R/W bits on their fences.
- Many AMOs need the aq and rl bits set.
- We now have thread_info in task_struct. As a result, sscratch
now contains TP instead of SP. This was necessary because
thread_info is no longer on the stack.
- A few shared routines have been added that we use instead of
creating another arch copy"
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Build Infrastructure
RISC-V: User-facing API
RISC-V: Paging and MMU
RISC-V: Device, timer, IRQs, and the SBI
RISC-V: Task implementation
RISC-V: ELF and module implementation
RISC-V: Generic library routines and assembly
RISC-V: Atomic and Locking Code
RISC-V: Init and Halt Code
dt-bindings: RISC-V CPU Bindings
lib: Add shared copies of some GCC library routines
MAINTAINERS: Add RISC-V
There are no big surprising changes in this cycle, yet not too
boring, either. The biggest change from diffstat POV is the removal
of the legacy OSS driver codes that have been already disabled for a
long time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the malicious
device accesses with a new helper code for endpoint sanity check.
- Lots of cleanups for ASoC Intel platform code, including support for
their open source audio firmware.
- Continued ASoC core componentization works.
- Support for scaling MCLK with sample rate in ASoC simple-card.
- Stabler PCM hot-unplug capability, especially for ASoC usages.
-----BEGIN PGP SIGNATURE-----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=BCBK
-----END PGP SIGNATURE-----
Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no big surprising changes in this cycle, yet not too boring,
either. The biggest change from diffstat POV is the removal of the
legacy OSS driver codes that have been already disabled for a long
time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the
malicious device accesses with a new helper code for endpoint
sanity check
- Lots of cleanups for ASoC Intel platform code, including support
for their open source audio firmware
- Continued ASoC core componentization works
- Support for scaling MCLK with sample rate in ASoC simple-card
- Stabler PCM hot-unplug capability, especially for ASoC usages"
* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
Documentation: sound: hd-audio: notes.rst
ASoC: bcm2835: Support left/right justified and DSP modes
ASoC: bcm2835: Enforce full symmetry
ASoC: bcm2835: Support additional samplerates up to 384kHz
ASoC: bcm2835: Add support for TDM modes
ASoC: add mclk-fs support to audio graph card
ASoC: add mclk-fs to audio graph card binding
ASoC: rt5514: work around link error
ASoC: rt5514: mark PM functions as __maybe_unused
ASoC: rt5663: Check the JD status in the button pushing
ASoC: amd: Modified DMA transfer Mechanism for Playback
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
ASoC: da7213: add support for DSP modes
ASoC: sun8i-codec: Add a comment on the LRCK inversion
ASoC: sun8i-codec: Set the BCLK divider
ASoC: rt5663: Delay and retry reading rt5663 ID register
ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
ASoC: cs42l56: Fix reset GPIO name in example DT binding
ASoC: rt5514-spi: check irq status to schedule data copy in resume function
...
Pull i2c updates from Wolfram Sang:
"This contains two bigger than usual tree-wide changes this time. They
all have proper acks, caused no merge conflicts in linux-next where
they have been for a while. They are namely:
- to-gpiod conversion of the i2c-gpio driver and its users (touching
arch/* and drivers/mfd/*)
- adding a sbs-manager based on I2C core updates to SMBus alerts
(touching drivers/power/*)
Other notable changes:
- i2c_boardinfo can now carry a dev_name to be used when the device
is created. This is because some devices in ACPI world need fixed
names to find the regulators.
- the designware driver got a long discussed overhaul of its PM
handling. img-scb and davinci got PM support, too.
- at24 driver has way better OF support. And it has a new maintainer.
Thanks Bartosz for stepping up!
The rest is regular driver updates and fixes"
* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
ARM: sa1100: simpad: Correct I2C GPIO offsets
i2c: aspeed: Deassert reset in probe
eeprom: at24: Add OF device ID table
MAINTAINERS: new maintainer for AT24 driver
i2c: nuc900: remove platform_data, too
i2c: thunderx: Remove duplicate NULL check
i2c: taos-evm: Remove duplicate NULL check
i2c: Make i2c_unregister_device() NULL-aware
i2c: xgene-slimpro: Support v2
i2c: mpc: remove useless variable initialization
i2c: omap: Trigger bus recovery in lockup case
i2c: gpio: Add support for named gpios in DT
dt-bindings: i2c: i2c-gpio: Add support for named gpios
i2c: gpio: Local vars in probe
i2c: gpio: Augment all boardfiles to use open drain
i2c: gpio: Enforce open drain through gpiolib
gpio: Make it possible for consumers to enforce open drain
i2c: gpio: Convert to use descriptors
power: supply: sbs-message: fix some code style issues
power: supply: sbs-battery: remove unchecked return var
...
CORE:
- Fix the semantics of raw GPIO to actually be raw. No
inversion semantics as before, but also no open draining,
and allow the raw operations to affect lines used for
interrupts as the caller supposedly knows what they are
doing if they are getting the big hammer.
- Rewrote the __inner_function() notation calls to names that
make more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all
IRQs are mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This
allows us to read several GPIO lines with a single
register read. This has high value for some usecases: it
can be used to create oscilloscopes and signal analyzers
and other things that rely on reading several lines at
exactly the same instant. Also a generally nice
optimization. This uses the new assign_bit() macro from
the bitops lib that was ACKed by Andrew Morton and
is implemented for two drivers, one of them being the
generic MMIO driver so everyone using that will be able
to benefit from this.
- Do not allow requests of Open Drain and Open Source
setting of a GPIO line simultaneously. If the hardware
actually supports enabling both at the same time the
electrical result would be disastrous.
- A new interrupt chip core helper. This will be helpful
to deal with "banked" GPIOs, which means GPIO controllers
with several logical blocks of GPIO inside them. This
is several gpiochips per device in the device model, in
contrast to the case when there is a 1-to-1 relationship
between a device and a gpiochip.
NEW DRIVERS:
- Maxim MAX3191x industrial serializer, a very interesting
piece of professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the
recent Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
OTHER IMPROVEMENTS:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the
Broadcom BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal
of dead code etc.
- Explicit comments on fall-through switch() statements.
-----BEGIN PGP SIGNATURE-----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=8Mon
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.15 kernel cycle:
Core:
- Fix the semantics of raw GPIO to actually be raw. No inversion
semantics as before, but also no open draining, and allow the raw
operations to affect lines used for interrupts as the caller
supposedly knows what they are doing if they are getting the big
hammer.
- Rewrote the __inner_function() notation calls to names that make
more sense. I just find this kind of code disturbing.
- Drop the .irq_base() field from the gpiochip since now all IRQs are
mapped dynamically. This is nice.
- Support for .get_multiple() in the core driver API. This allows us
to read several GPIO lines with a single register read. This has
high value for some usecases: it can be used to create
oscilloscopes and signal analyzers and other things that rely on
reading several lines at exactly the same instant. Also a generally
nice optimization. This uses the new assign_bit() macro from the
bitops lib that was ACKed by Andrew Morton and is implemented for
two drivers, one of them being the generic MMIO driver so everyone
using that will be able to benefit from this.
- Do not allow requests of Open Drain and Open Source setting of a
GPIO line simultaneously. If the hardware actually supports
enabling both at the same time the electrical result would be
disastrous.
- A new interrupt chip core helper. This will be helpful to deal with
"banked" GPIOs, which means GPIO controllers with several logical
blocks of GPIO inside them. This is several gpiochips per device in
the device model, in contrast to the case when there is a 1-to-1
relationship between a device and a gpiochip.
New drivers:
- Maxim MAX3191x industrial serializer, a very interesting piece of
professional I/O hardware.
- Uniphier GPIO driver. This is the GPIO block from the recent
Socionext (ex Fujitsu and Panasonic) platform.
- Tegra 186 driver. This is based on the new banked GPIO
infrastructure.
Other improvements:
- Some documentation improvements.
- Wakeup support for the DesignWare DWAPB GPIO controller.
- Reset line support on the DesignWare DWAPB GPIO controller.
- Several non-critical bug fixes and improvements for the Broadcom
BRCMSTB driver.
- Misc non-critical bug fixes like exotic errorpaths, removal of dead
code etc.
- Explicit comments on fall-through switch() statements"
* tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits)
gpio: tegra186: Remove tegra186_gpio_lock_class
gpio: rcar: Add r8a77995 (R-Car D3) support
pinctrl: bcm2835: Fix some merge fallout
gpio: Fix undefined lock_dep_class
gpio: Automatically add lockdep keys
gpio: Introduce struct gpio_irq_chip.first
gpio: Disambiguate struct gpio_irq_chip.nested
gpio: Add Tegra186 support
gpio: Export gpiochip_irq_{map,unmap}()
gpio: Implement tighter IRQ chip integration
gpio: Move lock_key into struct gpio_irq_chip
gpio: Move irq_valid_mask into struct gpio_irq_chip
gpio: Move irq_nested into struct gpio_irq_chip
gpio: Move irq_chained_parent to struct gpio_irq_chip
gpio: Move irq_default_type to struct gpio_irq_chip
gpio: Move irq_handler to struct gpio_irq_chip
gpio: Move irqdomain into struct gpio_irq_chip
gpio: Move irqchip into struct gpio_irq_chip
gpio: Introduce struct gpio_irq_chip
pinctrl: armada-37xx: remove unused variable
...
Updates for this cycle include:
- New driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers
- PM support for IMG MDC drivers
- Updates to bcm-sba-raid driver and improvements to sun6i driver
- Subsystem conversion for:
- timers to use timer_setup()
- remove usage of PCI pool API
- usage of %p format specifier
- Minor updates to bunch of drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=t9Ix
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"Updates for this cycle include:
- new driver for Spreadtrum dma controller, ST MDMA and DMAMUX
controllers
- PM support for IMG MDC drivers
- updates to bcm-sba-raid driver and improvements to sun6i driver
- subsystem conversion for:
- timers to use timer_setup()
- remove usage of PCI pool API
- usage of %p format specifier
- minor updates to bunch of drivers"
* tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits)
dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type
dmaengine: dmatest: warn user when dma test times out
dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue"
dmaengine: stm32_mdma: activate pack/unpack feature
dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad
dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad
MAINTAINERS: Step down from a co-maintaner of DW DMAC driver
dmaengine: pch_dma: Replace PCI pool old API
dmaengine: Convert timers to use timer_setup()
dmaengine: sprd: Add Spreadtrum DMA driver
dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller
dmaengine: sun6i: Retrieve channel count/max request from devicetree
dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs
dmaengine: bcm-sba-raid: Use common GPL comment header
dmaengine: bcm-sba-raid: Use only single mailbox channel
dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock
dmaengine: pl330: fix descriptor allocation fail
dmaengine: rcar-dmac: use TCRB instead of TCR for residue
dmaengine: sun6i: Add support for Allwinner A64 and compatibles
arm64: allwinner: a64: Add devicetree binding for DMA controller
...
Pull MD update from Shaohua Li:
"This update mostly includes bug fixes:
- md-cluster now supports raid10 from Guoqing
- raid5 PPL fixes from Artur
- badblock regression fix from Bo
- suspend hang related fixes from Neil
- raid5 reshape fixes from Neil
- raid1 freeze deadlock fix from Nate
- memleak fixes from Zdenek
- bitmap related fixes from Me and Tao
- other fixes and cleanups"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits)
md: free unused memory after bitmap resize
md: release allocated bitset sync_set
md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb
md: be cautious about using ->curr_resync_completed for ->recovery_offset
badblocks: fix wrong return value in badblocks_set if badblocks are disabled
md: don't check MD_SB_CHANGE_CLEAN in md_allow_write
md-cluster: update document for raid10
md: remove redundant variable q
raid1: remove obsolete code in raid1_write_request
md-cluster: Use a small window for raid10 resync
md-cluster: Suspend writes in RAID10 if within range
md-cluster/raid10: set "do_balance = 0" if area is resyncing
md: use lockdep_assert_held
raid1: prevent freeze_array/wait_all_barriers deadlock
md: use TASK_IDLE instead of blocking signals
md: remove special meaning of ->quiesce(.., 2)
md: allow metadata update while suspending.
md: use mddev_suspend/resume instead of ->quiesce()
md: move suspend_hi/lo handling into core md code
md: don't call bitmap_create() while array is quiesced.
...
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAloI8AUACgkQ8vlZVpUN
gaMdjgf8CCW7UhPjoZYwF8sUNtAaX9+JZT1maOcXUhpJ3vRQiRn+AzRH6yBYMm79
+NZBwVlk4dlEe55Wh4yFIStMAstqzCrke4C9CSbExjgHNsJdU4znyYuLRMbLfyO0
6c4NObiAIKJdW1/te1aN90keGC6min8pBZot+FqZsRr+Kq2+IOtM43JAv7efOLev
v3LCjUf9JKxatoB8tgw4AJRa1p18p7D2APWTG05VlFq63TjhVIYNvvwcQlizLwGY
cuEq3X59FbFdX06fJnucujU3WP3ES4/3rhufBK4NNaec5e5dbnH2KlAx7J5SyMIZ
0qUFB/dmXDSb3gsfScSGo1F71Ad0CA==
=asAm
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Lots of cleanups, mostly courtesy by Eric Biggers"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: lock mutex before checking for bounce page pool
fscrypt: add a documentation file for filesystem-level encryption
ext4: switch to fscrypt_prepare_setattr()
ext4: switch to fscrypt_prepare_lookup()
ext4: switch to fscrypt_prepare_rename()
ext4: switch to fscrypt_prepare_link()
ext4: switch to fscrypt_file_open()
fscrypt: new helper function - fscrypt_prepare_setattr()
fscrypt: new helper function - fscrypt_prepare_lookup()
fscrypt: new helper function - fscrypt_prepare_rename()
fscrypt: new helper function - fscrypt_prepare_link()
fscrypt: new helper function - fscrypt_file_open()
fscrypt: new helper function - fscrypt_require_key()
fscrypt: remove unneeded empty fscrypt_operations structs
fscrypt: remove ->is_encrypted()
fscrypt: switch from ->is_encrypted() to IS_ENCRYPTED()
fs, fscrypt: add an S_ENCRYPTED inode flag
fscrypt: clean up include file mess
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
There are some conflicts between staging and media trees,
as reported by Stephen Rothwell <sfr@canb.auug.org.au>.
So, merge from staging.
* tag 'staging-4.15-rc1': (775 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
I may go through a mail re-org in the not-too-distant future, but my
kernel.org address should remain valid throughout any transition.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along with
phy and chipidea enhancements. There's also a lot of SPDX tags and
license boilerplate cleanups as well, which provide some churn in the
diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see happen.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgm/Vw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yktXwCdGgpInfOEvOGFd83EPDL7a1ncyc4AoM5wI8yl
1CeLipqVIN3IsMMJptvb
=zvDI
-----END PGP SIGNATURE-----
Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along
with phy and chipidea enhancements. There's also a lot of SPDX tags
and license boilerplate cleanups as well, which provide some churn in
the diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see
happen.
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: usbfs: compute urb->actual_length for isochronous
usb: core: message: remember to reset 'ret' to 0 when necessary
USB: typec: Remove remaining redundant license text
USB: typec: add SPDX identifiers to some files
USB: renesas_usbhs: rcar?.h: add SPDX tags
USB: chipidea: ci_hdrc_tegra.c: add SPDX line
USB: host: xhci-debugfs: add SPDX lines
USB: add SPDX identifiers to all remaining Makefiles
usb: host: isp1362-hcd: remove a couple of redundant assignments
USB: adutux: remove redundant variable minor
usb: core: add a new usb_get_ptm_status() helper
usb: core: add a 'type' parameter to usb_get_status()
usb: core: introduce a new usb_get_std_status() helper
usb: core: rename usb_get_status() 'type' argument to 'recip'
usb: core: add Status Type definitions
USB: gadget: Remove redundant license text
USB: gadget: function: Remove redundant license text
USB: gadget: udc: Remove redundant license text
USB: gadget: legacy: Remove redundant license text
...
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume
and clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler
on ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core
and drop legacy bus type suspend and resume callbacks from
ARM/locomo (Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up
somewhat (Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle)
residency counter based on the LPIT ACPI table on Intel
platforms (Srinivas Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the
notifier removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use
stale cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing
wakeup events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent
the PM core from using the direct-complete optimization with
it as that is guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit
(Gaurav Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it
up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in
the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches,
Rafael Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava,
Shuah Khan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QTnx
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as true"
get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of the
necessary data-structures to be per-cpu.
- The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push it
together with these patches.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaCaO/AAoJEMOzHC1eZifkwyUQAIwp5q242D5P0Mo8gvpmNZ7s
Lc7XBe1+dahbW8OIh0b8XhufkwFHY614bnrDBAr8GOcbaOXgxk8LbhTmkwbFO9z7
fm5YKr7il0dunCWfw278sQcZsCRQ9sQkXIei0gJL/56Uq6dbJhIREcOgjHBjDW5r
tblrbv70fPmTCP/7cw08y4QwXIAf+8zEhECJcDKqFZ2nhQkWQUd3BAppxdCOWSDa
aV9qOa/koP9lAKg8aWOCwCuS+WK386KNCCowsTxpyWdl9tMWsebeBh1odxteKiiB
KpAENfEvbjuYMWH3CQ+XdSDDdIdGnIP6l5KDzBkhF1USXwS7AlaMUpbPHcLXVRFi
1S2zcO9i6WfTnaDpNZc+L8oHqgyLUDJ6RgC6juLEmbfnCVmzNkLKCYa3d3JRI/oC
6qxpHYkLKWsJoOHDcs0fiMOLhkJZrzPYkIv0fW+uwTM10onxhm48fm6RNWuwqXWd
4FoH8ufqeACxWEotv6pcL7RUYrmX1gmvxby8CCHiUBIBoRM3bGmqTVvgX64nULgB
QIn/74R3J6GDPKicHDcq8ZOnMWvE6nbpXXbX73PqjXMf80HVjejV3Fg2su8m7LR0
+ni1ndKYB3V+t0+m1m5eMvpKMQ2HrMIMdx0M4xL+Z0fT8B3lcZWpb4wBsG7E+C49
pyf9xEk34Fe7HR+7KBO9
=euP7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The OpenRISC work is a bit more interesting this time, adding SMP
support and a few general cleanups.
Small Things:
- Move OpenRISC docs into Documentation and clean them up
- Document previously undocumented devicetree bindings
- Update the or1ksim dts to use stdout-path
OpenRISC SMP support details:
- First the "use shadow registers" and "define CPU_BIG_ENDIAN as
true" get the architecture ready for SMP.
- The "add 1 and 2 byte cmpxchg support" and "use qspinlocks and
qrwlocks" add the SMP locking infrastructure as needed. Using the
qspinlocks and qrwlocks as suggested by Peter Z while reviewing the
original spinlocks implementation.
- The "support for ompic" adds a new irqchip device which is used for
IPI communication to support SMP.
- The "initial SMP support" adds smp.c and makes changes to all of
the necessary data-structures to be per-cpu.
The remaining patches are bug fixes and debug helpers which I wanted
to keep separate from the "initial SMP support" in order to allow them
to be reviewed on their own. This includes:
- add cacheflush support to fix icache aliasing
- fix initial preempt state for secondary cpu tasks
- sleep instead of spin on secondary wait
- support framepointers and STACKTRACE_SUPPORT
- enable LOCKDEP_SUPPORT and irqflags tracing
- timer sync: Add tick timer sync logic
- fix possible deadlock in timer sync, pointed out by mips guys
Note: the irqchip patch was reviewed with Marc and we agreed to push
it together with these patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: fix possible deadlock scenario during timer sync
openrisc: pass endianness info to sparse
openrisc: add tick timer multi-core sync logic
openrisc: enable LOCKDEP_SUPPORT and irqflags tracing
openrisc: support framepointers and STACKTRACE_SUPPORT
openrisc: add simple_smp dts and defconfig for simulators
openrisc: add cacheflush support to fix icache aliasing
openrisc: sleep instead of spin on secondary wait
openrisc: fix initial preempt state for secondary cpu tasks
openrisc: initial SMP support
irqchip: add initial support for ompic
dt-bindings: add openrisc to vendor prefixes list
openrisc: use qspinlocks and qrwlocks
openrisc: add 1 and 2 byte cmpxchg support
openrisc: use shadow registers to save regs on exception
dt-bindings: openrisc: Add OpenRISC platform SoC
Documentation: openrisc: Updates to README
Documentation: Move OpenRISC docs out of arch/
MAINTAINERS: Add OpenRISC pic maintainer
openrisc: dts: or1ksim: Add stdout-path
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
Pull general security subsystem updates from James Morris:
"TPM (from Jarkko):
- essential clean up for tpm_crb so that ARM64 and x86 versions do
not distract each other as much as before
- /dev/tpm0 rejects now too short writes (shorter buffer than
specified in the command header
- use DMA-safe buffer in tpm_tis_spi
- otherwise mostly minor fixes.
Smack:
- base support for overlafs
Capabilities:
- BPRM_FCAPS fixes, from Richard Guy Briggs:
The audit subsystem is adding a BPRM_FCAPS record when auditing
setuid application execution (SYSCALL execve). This is not expected
as it was supposed to be limited to when the file system actually
had capabilities in an extended attribute. It lists all
capabilities making the event really ugly to parse what is
happening. The PATH record correctly records the setuid bit and
owner. Suppress the BPRM_FCAPS record on set*id.
TOMOYO:
- Y2038 timestamping fixes"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits)
MAINTAINERS: update the IMA, EVM, trusted-keys, encrypted-keys entries
Smack: Base support for overlayfs
MAINTAINERS: remove David Safford as maintainer for encrypted+trusted keys
tomoyo: fix timestamping for y2038
capabilities: audit log other surprising conditions
capabilities: fix logic for effective root or real root
capabilities: invert logic for clarity
capabilities: remove a layer of conditional logic
capabilities: move audit log decision to function
capabilities: use intuitive names for id changes
capabilities: use root_priveleged inline to clarify logic
capabilities: rename has_cap to has_fcap
capabilities: intuitive names for cap gain status
capabilities: factor out cap_bprm_set_creds privileged root
tpm, tpm_tis: use ARRAY_SIZE() to define TPM_HID_USR_IDX
tpm: fix duplicate inline declaration specifier
tpm: fix type of a local variables in tpm_tis_spi.c
tpm: fix type of a local variable in tpm2_map_command()
tpm: fix type of a local variable in tpm2_get_cc_attrs_tbl()
tpm-dev-common: Reject too short writes
...
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3Gvx
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Introduce host claiming by context to support blkmq
- Preparations for enabling CQE (eMMC CMDQ) requests
- Re-factorizations to prepare for blkmq support
- Re-factorizations to prepare for CQE support
- Fix signal voltage switch for SD cards without power cycle
- Convert RPMB to a character device
- Export eMMC revision via sysfs
- Support eMMC DT binding for fixed driver type
- Document mmc_regulator_get_supply() API
MMC host:
- omap_hsmmc: Updated regulator management for PBIAS
- sdhci-omap: Add new OMAP SDHCI driver
- meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs
- sdhci-pci: Add support for Intel CDF
- sdhci-acpi: Fix voltage switch for some Intel host controllers
- sdhci-msm: Enable delay circuit calibration clocks
- sdhci-msm: Manage power IRQ properly
- mediatek: Add support of mt2701/mt2712
- mediatek: Updates management of clocks and tunings
- mediatek: Upgrade eMMC HS400 support
- rtsx_pci: Update tuning for gen3 PCI-Express
- renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings
- Catch all errors when getting regulators
- Various additional improvements and cleanups"
* tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits)
sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute
dt-bindings: sdhci-fujitsu: document cmd-dat-delay property
mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
mmc: dw_mmc: Convert timers to use timer_setup()
mmc: dw_mmc: Cleanup the DTO timer like the CTO one
mmc: vub300: Use common code in __download_offload_pseudocode()
mmc: tmio: Use common error handling code in tmio_mmc_host_probe()
mmc: Convert timers to use timer_setup()
mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers
mmc: sdhci-acpi: Let devices define their own private data
mmc: mediatek: perfer to use rise edge latching for cmd line
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: add latch-ck support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add busy_check support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add pad_tune0 support
mmc: mediatek: make hs400_tune_response only for mt8173
arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes
...
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov.
-----BEGIN PGP SIGNATURE-----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=XEah
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The usual pile of bugfixes, cleanups and minor driver enhancements.
Worth noting are the changes to ghes_edac to use a whitelist of
known-good platforms on which GHES error reporting works relatively
reliably. By Toshi Kani and Borislav Petkov"
* tag 'edac_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix missing break in switch
MAINTAINERS: Split Cavium EDAC entry and add myself
EDAC, sb_edac: Fix missing DIMM sysfs entries with KNL SNC2/SNC4 mode
EDAC, skx_edac: Handle systems with segmented PCI busses
EDAC, thunderx: Remove suspend/resume support
EDAC, skx_edac: Fix detection of single-rank DIMMs
EDAC, sb_edac: Don't create a second memory controller if HA1 is not present
EDAC: Add owner check to the x86 platform drivers
EDAC: Add helper which returns the loaded platform driver
EDAC, ghes: Add platform check
EDAC, ghes: Model a single, logical memory controller
EDAC, ghes: Remove symbol exports
EDAC: Handle return value of kasprintf()
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from Sayli
Karnic will point out kerneldoc comments that are not actually used in
the documentation. Jani Nikula's documentation-file-ref-check finds
references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
-----BEGIN PGP SIGNATURE-----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=H6ud
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
- We have a couple of new helper scripts. find-unused-docs.sh from
Sayli Karnic will point out kerneldoc comments that are not actually
used in the documentation. Jani Nikula's
documentation-file-ref-check finds references to non-existing files.
- A new ftrace document from Steve Rostedt.
- Vinod Koul converted the dmaengine docs to RST
Beyond that, it's mostly simple fixes.
This set reaches outside of Documentation/ a bit more than most. In
all cases, the changes are to comment docs, mostly from Randy, in
places where there didn't seem to be anybody better to take them"
* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
documentation: fb: update list of available compiled-in fonts
MAINTAINERS: update DMAengine documentation location
dmaengine: doc: ReSTize pxa_dma doc
dmaengine: doc: ReSTize dmatest doc
dmaengine: doc: ReSTize client API doc
dmaengine: doc: ReSTize provider doc
dmaengine: doc: Add ReST style dmaengine document
ftrace/docs: Add documentation on how to use ftrace from within the kernel
bug-hunting.rst: Fix an example and a typo in a Sphinx tag
scripts: Add a script to find unused documentation
samples: Convert timers to use timer_setup()
documentation: kernel-api: add more info on bitmap functions
Documentation: fix selftests related file refs
Documentation: fix ref to power basic-pm-debugging
Documentation: fix ref to trace stm content
Documentation: fix ref to coccinelle content
Documentation: fix ref to workqueue content
Documentation: fix ref to sphinx/kerneldoc.py
Documentation: fix locking rt-mutex doc refs
docs: dev-tools: correct Coccinelle version number
...
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
=5KBY
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
* pm-devfreq:
PM / devfreq: Define the constant governor name
PM / devfreq: Remove unneeded conditional statement
PM / devfreq: Show the all available frequencies
PM / devfreq: Change return type of devfreq_set_freq_table()
PM / devfreq: Use the available min/max frequency
Revert "PM / devfreq: Add show_one macro to delete the duplicate code"
PM / devfreq: Set min/max_freq when adding the devfreq device
* pm-tools:
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
MAINTAINERS: add maintainer for tools/power/cpupower
cpupower: Fix no-rounding MHz frequency output
* pm-cpufreq-sched:
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
* pm-opp:
PM / OPP: Add dev_pm_opp_{un}register_get_pstate_helper()
PM / OPP: Support updating performance state of device's power domain
PM / OPP: add missing of_node_put() for of_get_cpu_node()
PM / OPP: Rename dev_pm_opp_register_put_opp_helper()
PM / OPP: Add missing of_node_put(np)
PM / OPP: Move error message to debug level
PM / OPP: Use snprintf() to avoid kasprintf() and kfree()
PM / OPP: Move the OPP directory out of power/
Stefan Schmidt says:
====================
pull-request: net-next: ieee802154 2017-11-09
A small update on ieee802154 patches for net-next. Nothing dramatic, but simply
housekeeping this time around.
A fix for the correct mask to be applied in the mrf24j40 driver by Gustavo A. R. Silva
Removal of a non existing email user for the ca8210 driver by Harry Morris
A bunch of checkpatch cleanups across the subsystem from myself
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The file arch/s390/include/uapi/asm/virtio-ccw.h belongs to the
s390 virtio drivers as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rG60
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.14-fixes-7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI maintainership updates from Bjorn Helgaas:
"Update MAINTAINERS for HiSilicon, Microsemi Switchtec, and native host
bridge drivers (Gabriele Paoloni, Sebastian Andrzej Siewior).
Note that starting with changes intended for v4.16, Lorenzo Pieralisi
will maintain the drivers/pci/{dwc,endpoint,host} directories. My
intent is to continue to merge those changes via my tree, so this
should be transparent to you"
* tag 'pci-v4.14-fixes-7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Add Lorenzo Pieralisi for PCI host bridge drivers
MAINTAINERS: Remove Gabriele Paoloni as HiSilicon PCI maintainer
MAINTAINERS: Remove Stephen Bates as Microsemi Switchtec maintainer
Simple cases of overlapping changes in the packet scheduler.
Must easier to resolve this time.
Which probably means that I screwed it up somehow.
Signed-off-by: David S. Miller <davem@davemloft.net>
This file defines an ABI shared between guest and hypervisor(s)
(KVM, Xen) and as such there should be an correspondent entry in
MAINTAINERS file. Notice that there's already a text notice at the
top of the header file, hence this commit simply enforces it more
explicitly and have both peers noticed when such changes happen.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Add Lorenzo Pieralisi as maintainer for PCI native host bridge drivers and
the endpoint driver framework.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
VME Subsystem lists driver-core repository as canonical tree. Greg has
stated that char-misc should be used for submissions instead[1].
[1] https://lkml.org/lkml/2017/9/1/486
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gabriele is now moving to a different role, so remove him as HiSilicon PCI
maintainer.
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
[bhelgaas: Thanks for all your help, Gabriele, and best wishes!]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Just sent an email there and received an autoreply because he no longer
works there.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Currently we are leaking addresses from the kernel to user space. This
script is an attempt to find some of those leakages. Script parses
`dmesg` output and /proc and /sys files for hex strings that look like
kernel addresses.
Only works for 64 bit kernels, the reason being that kernel addresses on
64 bit kernels have 'ffff' as the leading bit pattern making greping
possible. On 32 kernels we don't have this luxury.
Scripts is _slightly_ smarter than a straight grep, we check for false
positives (all 0's or all 1's, and vsyscall start/finish addresses).
[ I think there is a lot of room for improvement here, but it's already
useful, so I'm merging it as-is. The whole "hash %p format" series is
expected to go into 4.15, but will not fix %x users, and will not
incentivize people to look at what they are leaking. - Linus ]
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I will be gathering Thunderbolt related patches to this git tree with
help of other Thunderbolt maintainers.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing myself as I'm not longer following QAT development.
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
WIth ReST style documentation, we moved it to driver-api/dmaengine
so update this in MAINTAINERS entry
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Bartosz agreed to take over maintainership from me. Thank you very much
and good luck and have fun! :)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
- Update imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Update Pistachio SoC maintainership
- Fix NI 169445 build (new platform in 4.14)
- Fix EVA regression (4.14)
- Fix SMP-CPS build & preemption regressions (4.14)
- Fix SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- Fix ebpf_jit error return (4.13)
- Fix SMP-CMP build regressions (4.11 and 4.14)
- Fix bad UASM microMIPS encoding (3.16)
- Fix CM definitions (3.15)
-----BEGIN PGP SIGNATURE-----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=nqbK
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"A selection of important MIPS fixes for 4.14, and some MAINTAINERS /
email address updates:
Maintainership updates:
- imgtec.com -> mips.com email addresses (this trivially updates
comments in quite a few files, as well as MAINTAINERS)
- Pistachio SoC maintainership update
Fixes:
- NI 169445 build (new platform in 4.14)
- EVA regression (4.14)
- SMP-CPS build & preemption regressions (4.14)
- SMP/hotplug deadlock & race (deadlock reintroduced 4.13)
- ebpf_jit error return (4.13)
- SMP-CMP build regressions (4.11 and 4.14)
- bad UASM microMIPS encoding (3.16)
- CM definitions (3.15)"
[ I had taken the email address updates separately, because I didn't
expect James to send a pull request, so those got applied twice. - Linus]
* tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: Update email address for Marcin Nowakowski
MIPS: smp-cmp: Fix vpe_id build error
MAINTAINERS: Update Pistachio platform maintainers
MIPS: smp-cmp: Use right include for task_struct
MIPS: Update Goldfish RTC driver maintainer email address
MIPS: Update RINT emulation maintainer email address
MIPS: CPS: Fix use of current_cpu_data in preemptible code
MIPS: SMP: Fix deadlock & online race
MIPS: bpf: Fix a typo in build_one_insn()
MIPS: microMIPS: Fix incorrect mask in insn_table_MM
MIPS: Fix CM region target definitions
MIPS: generic: Fix compilation error from include asm/mips-cpc.h
MIPS: Fix exception entry when CONFIG_EVA enabled
MIPS: generic: Fix NI 169445 its build
Update MIPS email addresses
Based on discussions with Rafael J. Wysocki, cpupower is need of an
active maintainer. I decided to on take the task of maintaining this
tool.
Patches will flow through the pm sub-systems to the mainline.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mostly fixes this time, but also few new features.
Major changes:
wil6210
* remove ssid debugfs file
rsi
* add WOWLAN support for suspend, hibernate and shutdown states
ath10k
* add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware
where it's supported (QCA99x0 and QCA4019)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZ/HSCAAoJEG4XJFUm622b2sQH+wXgE1swS9xp1AfV3hcVLGoJ
YjLjR3/BAxsIqkYwhswarTDrD3jsOKrL4ywRk+0BAdR7f2BeOYhQXtZqgjvE8cbu
WWv5LmSwuKM6tF3ujgjQ6yZvgyDHl2d7lZL59EWG05K/yjJuU8ByoUhLKM5IiqPh
SWXj3ZtydgGZm2eZTPyan+MFz91jw/X23Jm/AaIAxayf+1J4n1lNpc4rRhUxh/oy
kGLQ2vsVnegSiHJWTboDFPeRha+daBsbf1MQc0Bh7MzDoWcaqSNX5VgrbaRqp35u
sb9pmPZS4FzvAdU3bJ9AIPa9ujjblEvDp1JIhrfBUqiuTdvXDZ7XtW8kVsJk1RY=
=MvWY
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.15
Mostly fixes this time, but also few new features.
Major changes:
wil6210
* remove ssid debugfs file
rsi
* add WOWLAN support for suspend, hibernate and shutdown states
ath10k
* add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware
where it's supported (QCA99x0 and QCA4019)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
This application uses the character device /dev/wmi/dell-smbios
to perform SMBIOS communications from userspace.
It offers demonstrations of a few simple tasks:
- Running a class/select command
- Querying a token value
- Activating a token
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
For WMI operations that are only Set or Query readable and writable sysfs
attributes created by WMI vendor drivers or the bus driver makes sense.
For other WMI operations that are run on Method, there needs to be a
way to guarantee to userspace that the results from the method call
belong to the data request to the method call. Sysfs attributes don't
work well in this scenario because two userspace processes may be
competing at reading/writing an attribute and step on each other's
data.
When a WMI vendor driver declares a callback method in the wmi_driver
the WMI bus driver will create a character device that maps to that
function. This callback method will be responsible for filtering
invalid requests and performing the actual call.
That character device will correspond to this path:
/dev/wmi/$driver
Performing read() on this character device will provide the size
of the buffer that the character device needs to perform calls.
This buffer size can be set by vendor drivers through a new symbol
or when MOF parsing is available by the MOF.
Performing ioctl() on this character device will be interpretd
by the WMI bus driver. It will perform sanity tests for size of
data, test them for a valid instance, copy the data from userspace
and pass iton to the vendor driver to further process and run.
This creates an implicit policy that each driver will only be allowed
a single character device. If a module matches multiple GUID's,
the wmi_devices will need to be all handled by the same wmi_driver.
The WMI vendor drivers will be responsible for managing inappropriate
access to this character device and proper locking on data used by
it.
When a WMI vendor driver is unloaded the WMI bus driver will clean
up the character device and any memory allocated for the call.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The dell-smbios stack only currently uses an SMI interface which grants
direct access to physical memory to the firmware SMM methods via a pointer.
This dispatcher driver adds a WMI-ACPI interface that is detected by WMI
probe and preferred over the SMI interface in dell-smbios.
Changing this to operate over WMI-ACPI will use an ACPI OperationRegion
for a buffer of data storage when SMM calls are performed.
This is a safer approach to use in kernel drivers as the SMM will
only have access to that OperationRegion.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This splits up the dell-smbios driver into two drivers:
* dell-smbios
* dell-smbios-smm
dell-smbios can operate with multiple different dispatcher drivers to
perform SMBIOS operations.
Also modify the interface that dell-laptop and dell-wmi use align to this
model more closely. Rather than a single global buffer being allocated
for all drivers, each driver will allocate and be responsible for it's own
buffer. The pointer will be passed to the calling function and each
dispatcher driver will then internally copy it to the proper location to
perform it's call.
Add defines for calls used by these methods in the dell-smbios.h header
for tracking purposes.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Currently userspace tools can access system tokens via the dcdbas
kernel module and a SMI call that will cause the platform to execute
SMM code.
With a goal in mind of deprecating the dcdbas kernel module a different
method for accessing these tokens from userspace needs to be created.
This is intentionally marked to only be readable as a process with
CAP_SYS_ADMIN as it can contain sensitive information about the
platform's configuration.
While adding this interface I found that some tokens are duplicated.
These need to be ignored from sysfs to avoid duplicate files.
MAINTAINERS was missing for this driver. Add myself and Pali to
maintainers list for it.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
All communication on individual GUIDs should occur in separate drivers.
Allowing a driver to communicate with the bus to another GUID is just
a hack that discourages drivers to adopt the bus model.
The information found from the WMI descriptor driver is now exported
for use by other drivers.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Edward O'Callaghan <quasisec@google.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:
- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.
- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.
- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).
- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.
New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.
Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ0WQ6AAoJEHm+PkMAQRiGuloH/3sF4qfBhPuJo8OTf0uCtQ18
4Ux9zZbm81df/Jjz0exAp1Jqk+TvdIS3OXPWcKilvbUBP16hQcsxFTnI/5QF+YcN
87aNr+OCMJzOBK4suN1yhzO46NYHeIizdB0PTZVL1Zsto69Tt31D8VJmgH6oBxAw
Isb/nAkOr31dZ9PI5UEExTIanUt6EywVb0UswA+2rNl3h1UkeasQCpMpK2n6HBhU
kVD7sxEd/CN0MmfhB0HrySSam/BeSpOtzoU9bemOwrU2uu9+5+2rqMe7Gsdj4nX6
3Kk+7FQNktlrhxCZIFN/+CdusOUuDd8r/75d7DnsRK5YvSb0sZzJkfD3Nba68Ms=
=7J2+
-----END PGP SIGNATURE-----
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge 4.14-rc3 in order to pick up the new timer_setup function.
Dan steps down as caam maintainer, being replaced by Aymen.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull i2c/cht-wc-fusb302-immutable immutable branch from Wolfram Sang:
as discussed before, here is the immutable branch for the i2c-cht-wc
driver, so you can safely apply Hans' patch [1]
"platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties"
on top of this.
[1] http://patchwork.ozlabs.org/patch/824314/
IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as
described in the Multi-core support section of the OpenRISC 1.2
architecture specification:
https://github.com/openrisc/doc/raw/master/openrisc-arch-1.2-rev0.pdf
Each OpenRISC core contains a full interrupt controller which is used in
the SMP architecture for interrupt balancing. This IPI device, the
ompic, is the only external device required for enabling SMP on
OpenRISC.
Pending ops are stored in a memory bit mask which can allow multiple
pending operations to be set and serviced at a time. This is mostly
borrowed from the alpha IPI implementation.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne@gmail.com: converted ops to bitmask, wrote commit message]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add devicetree binding documentation for the OpenRISC platform
opencores,or1ksim. This is the main OpenRISC reference platform
supporting multiple FPGA SoC's.
This format is based on some of the mips binding docs as we have
similar requirements.
Also, update maintainers so openrisc related binding changes are visible
to the openrisc team.
Acked-by: Rob Herring <robh@kernel.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Stafford Horne <shorne@gmail.com>
- add SoC ids for the sama5d2 SiPs
- Improve the AT91 maintainers entry
-----BEGIN PGP SIGNATURE-----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=rOv0
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
Pull "soc for 4.15" from Alexandre Belloni:
- add SoC ids for the sama5d2 SiPs
- Improve the AT91 maintainers entry
* tag 'at91-ab-4.15-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
MAINTAINERS: Add SoC drivers to AT91 entry
drivers: soc: atmel: Add basic support for new sama5d2 SiPs
As discussed at ELCE 2017 there is little to anticipate from me in the
future with regard to the driver, and since I have many things to keep
an eye on, I would like to step down to simple designated reviewer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Smooth Cong Wang's bug fix into 'net-next'. Basically put
the bulk of the tcf_block_put() logic from 'net' into
tcf_block_put_ext(), but after the offload unbind.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add myself to list of maintainers for cisco vic ethernet nic driver. Remove
Neel as he left.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neither of the current maintainers works for Imagination any more.
Removed both imgtec email addresses and added back mine for
occasional reviews, also changed from Maintained to Odd Fixes to
reflect the time that I will be able to spend on it.
Signed-off-by: James Hartley <james.hartley@sondrel.com>
Patchwork: https://patchwork.linux-mips.org/patch/17475/
Signed-off-by: James Hogan <jhogan@kernel.org>
It looks like the best place in MAINTAINERS data base to cover this
orphaned module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
to address common misconceptions about what BPF is and what it's not
add short BPF Q&A that clarifies core BPF design principles and
answers some common questions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide a mailing list for maintenance of the module instead.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the time being I will be available in my private mail. Update both the
MAINTAINERS file and the individual modules MODULE_AUTHOR directive with
the new address.
Signed-off-by: Yotam Gigi <yotam.gi@gmail.com>
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:
- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.
- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.
- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).
- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.
New addresses are of the form firstname.lastname@mips.com, and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.
Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com>
Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Matt Redfearn <matt.redfearn@mips.com>
Acked-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17540/
Signed-off-by: James Hogan <jhogan@kernel.org>
Perhaps long overdue, add a documentation file for filesystem-level
encryption, a.k.a. fscrypt or fs/crypto/, to the Documentation
directory. The new file is based loosely on the latest version of the
"EXT4 Encryption Design Document (public version)" Google Doc, but with
many improvements made, including:
- Reflect the reality that it is not specific to ext4 anymore.
- More thoroughly document the design and user-visible API/behavior.
- Replace outdated information, such as the outdated explanation of how
encrypted filenames are hashed for indexed directories and how
encrypted filenames are presented to userspace without the key.
(This was changed just before release.)
For now the focus is on the design and user-visible API/behavior, not on
how to add encryption support to a filesystem --- since the internal API
is still pretty messy and any standalone documentation for it would
become outdated as things get refactored over time.
Reviewed-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Gustavo volunteered to become a drm-misc co-maintainer, he'll take
care of 4.16 to get started.
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030131028.11285-1-daniel.vetter@ffwll.ch
Since no complaints have been raised after disabling the build of OSS
(Open Sound System) by the commit 31cbee6a56 ("sound: Disable the
build of OSS drivers"), let's finally drop the whole code and
documentation.
Some glue codes are still left intact since sound/oss/dmasound stuff
remains -- which is an independent implementation solely for m68k, and
it's not covered by ALSA yet.
Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.
Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 201af4c0fa ("cgroup: move cgroup files under kernel/cgroup/")
have renamed kernel/cpuset.c to kernel/cgroup/cpuset.c, but forgot to
update entry of cpuset module in MAINTAINERS, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To quote Felix: "For testing KV with current user mode stack, please use
amdgpu. I don't expect this to work with radeon and I'm not planning to
spend any effort on making radeon work with a current user mode stack."
Only compile tested, but should be straight forward.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The OpenRISC docs have traditionally been in arch/ but that does not
seem like the correct place to be. Move them so they will be more
visible to others. Also update MAINTAINERS to make sure we get
notifications of changes.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
4.15, please pull the following:
- Florian updates the MAINTAINERS entry for Broadcom SoCs with the Hurricane 2 regexp
to match new files being added
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZ6o1KAAoJEIfQlpxEBwcEUO4QAK1r7Xrfs6bZLoa/HxT3aGHo
kE11ZzEFcTGhDIgSDosxxZ4FjveVcJcdUdVJZ7jka1tUjqsTUJzGtpBMqEfkiEtE
rGEVIYdKPBkHkXn/QNkaRJvVJQOpDOb9mZx3CPdo52+UrCCmcWGxINhcf6J9awjk
oJgUXDWF0XlM+paif2wVcW9UhIAO3ByqGloooqDTIocZmX59t0V48z0TKt+Ga0T6
4lUGVFwCco5oYSkoN3ffC/qI0c3PERDayW/Jrc40inuna8PpEaIr1mvhzRSA9rLL
q5lz81Zb38VBdCdzauhnTDVLkR+xktlR3rwLz1O5AGSRWDZwiVhK2QIQLbCwbryU
RniCCuSLna7gNQt+aaLp8a60CV0Zzu8fbhO645aRRWF36zshM/D5FFPyI+LXePeX
NyPuEEdt/4NUvPSnOf4H7ygmPtBSzDCFIJKVaGL5ebhugY/OpkhgqHoy8dSmv6n+
XGE3iTe6oPy+lJN+HnkWsWnZ0smCAGeZEsPOxIAkH1n6KmW3r+FX1N64gX95I9DM
U5tCD+4fffnLCEtvUabc/2eSo1TQukzQJ6e2h7Nehr2JKP7g58uj1EqiCCgsplOh
Ze3bRBPORYvf0da+PhzIN2hzyL9Zo42R6jrnSnjYa2+hYGBPARIi5u0zd5zsqlSK
J13y4CM/bsaiRBW5Nooy
=86lP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.15/maintainers' of http://github.com/Broadcom/stblinux into next/soc
Pull "Broadcom maintainers changes for 4.15" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs MAINTAINERS file update for
4.15, please pull the following:
- Florian updates the MAINTAINERS entry for Broadcom SoCs with the Hurricane 2 regexp
to match new files being added
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZ8uDpAAoJELDendYovxMvnYAH/iYlLBkNhw2yLScYxMNuMo60
8W82/70UNdC2ZIWlIKQSDsvlU0Omy9Iu51zBrE6SEVKpISxrOvtYO5JiaZGhPAqY
2/Jpeuawdm44uaFPFwajLRsHIhgyuAxMxj7Y+TLFGW/+X6FrmFg5G3CNt5pRf0Ah
xraD8O5MYG6FfqxftCLMD8cKlxqslZwZUFuf5CjxSKbw4HTWcTEA7a86toONUI9L
hJjmAD6VRW/PgEVrLklQBRRwiSsV1nyBLrY5Q+sSEy9BGGvblO/yEEg8uO6sYmJ0
a9bycTASUbisV1LvCp7HcHFn6h60CZV2XwNgwRaToEF8ebycAw5hq6l7t8pFTNI=
=EvbJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.14c-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a fix for the Xen gntdev device repairing an issue in case of partial
failure of mapping multiple pages of another domain
- a fix of a regression in the Xen balloon driver introduced in 4.13
- a build fix for Xen on ARM which will trigger e.g. for Linux RT
- a maintainers update for pvops (not really Xen, but carrying through
this tree just for convenience)
* tag 'for-linus-4.14c-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
maintainers: drop Chris Wright from pvops
arm/xen: don't inclide rwlock.h directly.
xen: fix booting ballooned down hvm guest
xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
/utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
/sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
=Mhx+
-----END PGP SIGNATURE-----
Backmerge tag 'v4.14-rc7' into drm-next
Linux 4.14-rc7
Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
The next patch require net/dsa/tag_lan9303.c to access struct lan9303.
Therefore move struct lan9303 definitions from drivers/net/dsa/lan9303.h
to new file include/linux/dsa/lan9303.h.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver adds support for the Tegra CEC IP. It is based on the
NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel.
This has been converted to the CEC framework and cleaned up.
Tested with my Jetson TK1 board. It has also been tested with the
Tegra X1 in an embedded product.
Note of warning for the Tegra X2: this SoC supports two HDMI outputs,
but only one CEC adapter and the CEC bus is shared between the
two outputs. This is a design mistake and the CEC adapter can
control only one HDMI output. Never hook up both HDMI outputs
to the CEC bus in a hardware design: this is illegal as per the
CEC specification.
The CEC bus can be shared between multiple inputs and zero or one
outputs, but not between multiple outputs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add the maintainers entry to the atomisp staging media driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
*) Add support in phy core to perform phy calibration
*) Return NULL for optional PHY's even if CONFIG_GENERIC_PHY is not selected
*) Add USB Phy driver for Broadcom STB SoCs
*) Add support to force mediatek PHY with USB OTG function to enter
a specific mode
*) Calibrate rockchip-typec PHY according to docs
*) Enable dual route feature for sun4i-usb in V3s SoC
*) Use dr_mode dt property to enable otg capability in rcar-gen3-usb2
*) Add driver data to specify dedicated otg pins in rcar-gen3-usb2 driver
*) Configure the RX equalizer of brcm-sata PHY
*) Update pcie phy settings for ti-pipe3 phy
*) Add set_mode callback in qcom-ufs-qmp-14nm phy
*) Use PHY callbacks in phy-qcom-ufs instead of export APIs
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJZ8HRDAAoJEA5ceFyATYLZyFAP/R8kN02DtuvPTzXxgGYli1kC
CNpFYBGwL4rq39C/zT7+8xBXamwCOpPWqQJ6M0HgkD3XX1Vg6htH0VdvND9nZsPk
oSDenxPkDELyM6k5OqjGdWQCBEZdvoZqGHtuIsk4ZrZKVajvqBPAG2WI8tVBpiPL
27mwm/5QpXzXfNm1k8onXDqTpSBGmY1EcNvIgmon2Zl/qkWoKuNTpOv3w6JE/ktt
YOxg9ScQCyw1LYx82hKF86aq0M9nQ5F+pN5o6c7oNFrotK5cE/Us3XTgKCVH+3sb
wtbgHhDCCYeYShBr+msgPj8u8Jy596W6IcGFt2nuIm+ATL/qBZQyhSUtfzqPEf6k
ShtJ05jTUHrM16jVDf+nDIkv9ENeSsUOoDJ7FKo4ht0miBE5fD3tmLcXP5NfOla6
PMJN4g+TF/5Ym6eB0mtlq41V5aBInbBr07wD+WFp4uNgdtBHVSRz0yRA2CNIZpww
dhjoiAPjOeJlIeWMDJni7cvU6eAEV1hXRHB0+hPa0lQU3B7t4hZaROypzIwJd7Fu
ZUetYfcKCmViRinr8O6Ym4DhMatlxPSLgD2R6VQhGYtThUEO57oLBPv5XMzAthwi
PkigsXaO9fDCodECcNDO/PD0Zc6tUugRmiiD/UhVpSCQ+X1EsdYSrYBYtSwwMauC
DqNvwPo3MExkMjFs68ZU
=VvPn
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.15_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.15
*) Add support in phy core to perform phy calibration
*) Return NULL for optional PHY's even if CONFIG_GENERIC_PHY is not selected
*) Add USB Phy driver for Broadcom STB SoCs
*) Add support to force mediatek PHY with USB OTG function to enter
a specific mode
*) Calibrate rockchip-typec PHY according to docs
*) Enable dual route feature for sun4i-usb in V3s SoC
*) Use dr_mode dt property to enable otg capability in rcar-gen3-usb2
*) Add driver data to specify dedicated otg pins in rcar-gen3-usb2 driver
*) Configure the RX equalizer of brcm-sata PHY
*) Update pcie phy settings for ti-pipe3 phy
*) Add set_mode callback in qcom-ufs-qmp-14nm phy
*) Use PHY callbacks in phy-qcom-ufs instead of export APIs
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Emails to David's listed email address bounce, and in the commit log
there's no activity from him within the last 5 years.
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Safford <safford@us.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Mails to chrisw@sous-sol.org are not deliverable since several months.
Drop him as PARAVIRT_OPS maintainer.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
I work for MediaTek on maintaining the MediaTek SoC based RTC driver for
the existing SoCs and keep adding support for the following SoCs in the
future.
Cc: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
RDMA subsystem has one active maintainer who can apply
patches - Doug Ledford, but the RDMA entries in MAINTAINER file
are not stating it. The following patch removes Sean's and Hal's
emails from the maintainers list.
It will allow clean get_maintaner.pl output which is needed for people
outside of our community and various semi-automatic tools.
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a HiSilicon STB SoC PCIe controller driver. This controller is based
on the DesignWare PCIe core.
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We want the driver fixes in here and this resolves a merge issue with
the binder driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are a small number of USB and PHY driver fixes for 4.14-rc6
There is the usual musb and xhci fixes in here, as well as some needed
phy patches. Also is a nasty regression fix for usbfs that has started
to hit a lot of people using virtual machines.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWe2XgA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynFUwCeNkG6DErmFmdpRkz38rjqLDpK6kAAoIT14/S8
rmDxu0VfFBY2TWIPqyDA
=7MDm
-----END PGP SIGNATURE-----
Merge tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a small number of USB and PHY driver fixes for 4.14-rc6
There is the usual musb and xhci fixes in here, as well as some needed
phy patches. Also is a nasty regression fix for usbfs that has started
to hit a lot of people using virtual machines.
All of these have been in linux-next with no reported problems"
* tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
usb: hub: Allow reset retry for USB2 devices on connect bounce
USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()
MAINTAINERS: fix git tree url for musb module
usb: quirks: add quirk for WORLDE MINI MIDI keyboard
usb: musb: sunxi: Explicitly release USB PHY on exit
usb: musb: Check for host-mode using is_host_active() on reset interrupt
usb: musb: musb_cppi41: Configure the number of channels for DA8xx
usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx
usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers
USB: musb: fix late external abort on suspend
USB: musb: fix session-bit runtime-PM quirk
usb: cdc_acm: Add quirk for Elatec TWN3
USB: devio: Revert "USB: devio: Don't corrupt user memory"
usb: xhci: Handle error condition in xhci_stop_device()
usb: xhci: Reset halted endpoint if trb is noop
xhci: Cleanup current_cmd in xhci_cleanup_command_queue()
xhci: Identify USB 3.1 capable hosts by their port protocol capability
USB: serial: metro-usb: add MS7820 device id
phy: rockchip-typec: Check for errors from tcphy_phy_init()
phy: rockchip-typec: Don't set the aux voltage swing to 400 mV
...
This GPIO controller is used on UniPhier SoC family.
It also serves as an interrupt controller, but interrupt signals are
just delivered to the parent irqchip without any latching or OR'ing.
This type of hardware can be well described with hierarchy IRQ domain.
One unfortunate thing for this device is that the interrupt mapping to
the interrupt parent is not contiguous.
I asked how DT can describe interrupt mapping between two irqchips [1],
but I could not find a good solution (at least in the framework level).
In fact, irqchip drivers using hierarchy domain generally hard-code the
DT binding of their parent.
After tackling on several approaches such as hard-code of hwirqs,
irq_domain_push_irq(), I ended up with a vendor specific property.
If we come up with a good idea to support this in the framework, we
can migrate over to it, but we can live with a driver-level solution
for now.
[1] https://lkml.org/lkml/2017/7/6/758
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO controller is used on UniPhier SoC family.
The vendor specific property "socionext,interrupt-ranges" is for
specifying interrupt mapping to the parent interrupt controller
because the mapping is not contiguous. It works like "ranges",
but transforms "interrupts" instead of "reg".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
- add ARC AX10x support,
merged from a separate branch that is also included in the ARC tree
- add Stratix10 support via socfpga
- unify socfpga, stm32, sunxi, and zx2967 into simple-reset driver
- add Meson GX reset level control and remove an unneeded check
- add Uniphier PXs3 and ethernet reset controls
- add MT7622 reset control dt-bindings header
-----BEGIN PGP SIGNATURE-----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=yCoy
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.15' of git://git.pengutronix.de/git/pza/linux into next/drivers
Pull "Reset controller changes for v4.15" from Philipp Zabel:
- add ARC AX10x support,
merged from a separate branch that is also included in the ARC tree
- add Stratix10 support via socfpga
- unify socfpga, stm32, sunxi, and zx2967 into simple-reset driver
- add Meson GX reset level control and remove an unneeded check
- add Uniphier PXs3 and ethernet reset controls
- add MT7622 reset control dt-bindings header
* tag 'reset-for-4.15' of git://git.pengutronix.de/git/pza/linux:
reset: zx2967: use the reset-simple driver
reset: stm32: use the reset-simple driver
reset: socfpga: use the reset-simple driver
reset: sunxi: use reset-simple driver
reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967
reset: meson: remove unneeded check in meson_reset_reset
reset: meson: add level reset support for GX SoC family
reset: uniphier: add PXs3 reset data
reset: mediatek: add reset controller dt-bindings required header for MT7622 SoC
reset: socfpga: build the reset-socfpga for Stratix10 SOC
reset: uniphier: add ethernet reset control support
reset: socfpga: fix for 64-bit compilation
ARC: reset: introduce AXS10x reset driver
the following:
- Markus adds support for the Broadcom STB DDR PHY frontend which supports
dynamic firmware loading and offers the ability to respond with DRAM refresh
rates. He also adds a proper documentation binding document for that
peripheral
- Brian adds support for S2/S3/S5 system suspend/resume modes on ARM-based SoCs
which is not new but had been lingering for a long time.
- Justin adds S2/S3 system suspend/resume modes on MIPS-based SoCs which is a
bit new newer and builds on top of the ARM-based support.
- Florian adds Device Tree binding documents for both ARM and MIPS based systems
describing the necessary nodes for S2/S3/S5 on these SoCs.
(This pull request somehow missed the 4.14 merge window and is now being sent again
for 4.15 along with build fixes from Arnd).
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJZyVErAAoJEIfQlpxEBwcEJ2gQAMmiQV3twTqpwdzXVqa6/p+N
Mw1Ec331icefnZVa9+TYC81T+3k/jrKUuNtYjpJHm5wRNMcy4oNipdutnaxd976y
QCUKp6gbARfGhFkeiFwg4wlg6Xzx9VwsSICuJ1sQjnQFZNUy1zCOBqYvaXxmKgqj
Wbij2oHzCaQAI2GTN0rVyLINUqhbAmlWRpeD/I3vyFUjus3tJ2IoylSR/1dz2tlp
+mLWoNtnlG7nEl3TNYJnaNBYpRkAUvH3/jFJ+nABcC86FLj5SUyAaupPMIl3A7A2
Y53RwV8KOB84czWSWO2ktUnFoEC911FsIfVxTJ2u2ppp+aeHs+pnyjuAcDa5SkwB
1zfW1MDnb0AxFf+IZyIMrgRBNHMBJIp/+uGEJp0eUbbSYSW9iLvB3i5qizbWFfpF
RT6JPz2ofX6GmMvvffwEM1hB3ChPWNIhBY6+VT1gIjE9HwcqMM5O31hQZM48mui/
FNJm2VokpoCZ3aAjJyGpeV51wfoI1bcrYdCUl+jbwLOoChsSOu1QswmT61betepI
xilPwmoEC25IUB9Sn2K8QSj8D8l3dmDPFmqAaAQd8S5Ef6jsrZo8IJpMWmhFlw7i
9u0GItfzwzfd043gjdh3F3CwY8DsO9N0F8zOMWfa1DdaWbF8NESjtWrVrkGZsIn2
pAY81nMSsLXBRHylcsmt
=PnBH
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux into next/drivers
Pull "Broadcom drivers changes for 4.15" from Florian Fainelli:
This pull requests contains Broadcom SoCs drivers updates for 4.15, please pull
the following:
- Markus adds support for the Broadcom STB DDR PHY frontend which supports
dynamic firmware loading and offers the ability to respond with DRAM refresh
rates. He also adds a proper documentation binding document for that
peripheral
- Brian adds support for S2/S3/S5 system suspend/resume modes on ARM-based SoCs
which is not new but had been lingering for a long time.
- Justin adds S2/S3 system suspend/resume modes on MIPS-based SoCs which is a
bit new newer and builds on top of the ARM-based support.
- Florian adds Device Tree binding documents for both ARM and MIPS based systems
describing the necessary nodes for S2/S3/S5 on these SoCs.
(This pull request somehow missed the 4.14 merge window and is now being sent again
for 4.15 along with build fixes from Arnd).
* tag 'arm-soc/for-4.15/drivers' of http://github.com/Broadcom/stblinux:
soc bcm: brcmstb: Add support for S2/S3/S5 suspend states (MIPS)
dt-bindings: Document MIPS Broadcom STB power management nodes
soc: bcm: brcmstb: Add support for S2/S3/S5 suspend states (ARM)
dt-bindings: ARM: brcmstb: Update Broadcom STB Power Management binding
memory: brcmstb: Add driver for DPFE
dt-bindings: Add bindings for Broadcom STB DRAM Sensors
And update the entry for filesystem DAX to differentiate them.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull "Renesas ARM Based SoC DT Bindings Updates for v4.15" from Simon Horman:
* Consistently do not use ';' in documentation of compat strings
for boards. A misture of using and not using a trailing ';' had
krept in over time with not using being dominant.
* Document bindings for
- Eagle board and r8a77970 (V3M) SoC bindings.
Eagle is a board for the V3M SoC
- Document Kingfisher board bindings.
Kingfisher is an extension board for the H3ULCB and M3ULCB boards.
* Add r8a77970 (V3M) SYSC power domain definitions
Add macros usable by the device tree sources to reference r8a77970 SYSC
power domains by index.
* Add Renesas SoC DT bindings doc to Renesas ARM section of MAINTAINERS file
* Drop bogus node name suffix from example of /renesas,dw-hdmi binding
* Document APMU and SMP enable method for r8a7745 (RZ/G1E) SoC
* tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: remove inconsistent ; from documentation
arm64: renesas: document Eagle board bindings
arm: shmobile: Document Kingfisher board DT bindings
dt-bindings: power: add R8A77970 SYSC power domain definitions
MAINTAINERS: Add Renesas SoC DT bindings doc to Renesas ARM sections
ARM: shmobile: Document R-Car V3M SoC DT bindings
dt-bindings: display: renesas: dw-hdmi: Drop bogus node name suffix
dt-bindings: apmu: Document r8a7745 support
As spotted by Andreas Färber, the clocksource directory path does not follow
the rule where a maintained directory must end with a '/' character.
Also, the timers devicetree bindings documentation is not mentioned in the
entry, so every submission touching the devicetree documentation misses to
Cc the maintainers of the timers.
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
- Remove Soren from reviewer list
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlnkq1wACgkQykllyylKDCGN6wCfd5K3FU9KCUjoMVj2r5X8PhRL
TB4An05r17xISNOwQR6GsJwU9cgxA5NH
=SOzg
-----END PGP SIGNATURE-----
Merge tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx into next/soc
Pull "arm: Xilinx Zynq patches for v4.15" from Michal Simek:
- Remove Soren from reviewer list
* tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx:
MAINTAINERS: Remove myself as reviewer
ENA driver was developed by developers from Annapurna Labs.
Annapurna Labs was acquired by Amazon and the company's domain
(@annapurnalabs.com) will become deprecated soon.
Update the email addresses of the maintainers to the alternative amazon
emails (@amazon.com)
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the Cavium EDAC entry into MIPS and ARM drivers because
they have different maintainers and mailing lists.
Add myself as additional maintainer to the ThunderX driver.
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20171019064129.5064-1-jglauber@cavium.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The early for-next branch was based on v4.14-rc2, while the shared pull
request I got from Mellanox used a v4.14-rc4 base. I'm making the
branch that was the shared Mellanox pull request the new for-next branch
and merging the early for-next branch into it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The reset-simple driver can be used without changes.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* commit '3728e6a255b5': (904 commits)
Linux 4.14-rc5
x86/microcode: Do the family check first
locking/lockdep: Disable cross-release features for now
x86/mm: Flush more aggressively in lazy TLB mode
mm, swap: use page-cluster as max window of VMA based swap readahead
mm: page_vma_mapped: ensure pmd is loaded with READ_ONCE outside of lock
kmemleak: clear stale pointers from task stacks
fs/binfmt_misc.c: node could be NULL when evicting inode
fs/mpage.c: fix mpage_writepage() for pages with buffers
linux/kernel.h: add/correct kernel-doc notation
tty: fall back to N_NULL if switching to N_TTY fails during hangup
Revert "vmalloc: back off when the current task is killed"
mm/cma.c: take __GFP_NOWARN into account in cma_alloc()
scripts/kallsyms.c: ignore symbol type 'n'
userfaultfd: selftest: exercise -EEXIST only in background transfer
mm: only display online cpus of the numa node
mm: remove unnecessary WARN_ONCE in page_vma_mapped_walk().
mm/mempolicy: fix NUMA_INTERLEAVE_HIT counter
include/linux/of.h: provide of_n_{addr,size}_cells wrappers for !CONFIG_OF
mm/madvise.c: add description for MADV_WIPEONFORK and MADV_KEEPONFORK
...
Commit 3b2435192f ("MAINTAINERS: drop OMAP USB and MUSB
maintainership") switched the maintainer for musb module, but didn't
update the git tree location.
Delete the git tree information, since the current maintainer doesn't
have a public tree.
Reported-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Motivated by the desire to illiminate the imprecise nature of
DM-specific patches being unnecessarily sent to both the MD maintainer
and mailing-list. Which is born out of the fact that DM files also
reside in drivers/md/
Now all MD-specific files in drivers/md/ start with either "raid" or
"md-" and the MAINTAINERS file has been updated accordingly.
Shaohua: don't change module name
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Since about the time I was actually added in that file, I've been
almost entirely absent, which totally sucks, and there is no excuse
for my behaviour and for not having relinquished this earlier.
My deepest apologies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Vincent Legoll <vincent.legoll@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jiri and Namhyung have long contributed a lot of code and time reviewing
patches to tools/, so lets make that reflected in the MAINTAINERS file
to encourage patch submitters to add them to the CC list, speeding up
the process of tools/perf/ patch processing.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-onicopw68bg6kn56lnybfpns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update documentation, pointer to latest tools, appoint myself as
maintainer. Given it's been unloved for so long, I don't expect anyone
will protest.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 340267640d ("MAINTAINERS: da9062/61 updates to the Dialog
Semiconductor search terms") contained a typo for the watchdog binding:
da92??-wdt.txt should have read da90??-wdt.txt. This new commit will fix
the error and allows Dialog Semiconductor to follow files for PMIC
bindings correctly.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cyrille Pitchen