Commit Graph

567 Commits

Author SHA1 Message Date
Michael Ellerman 5e29a9105b selftests: Introduce minimal shared logic for running tests
This adds a Make include file which most selftests can then include to
get the run_tests logic.

On its own this has the advantage of some reduction in repetition, and
also means the pass/fail message is defined in fewer places.

However the key advantage is it will allow us to implement install very
simply in a subsequent patch.

The default implementation just executes each program in $(TEST_PROGS).

We use a variable to hold the default implementation of $(RUN_TESTS)
because that gives us a clean way to override it if necessary, ie. using
override. The mount, memory-hotplug and mqueue tests use that to provide
a different implementation.

Tests are not run via /bin/bash, so if they are scripts they must be
executable, we add a+x to several.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-13 15:13:40 -06:00
John Stultz 0d02a753a5 selftests/timers: Add set-2038 test from timetest suite
Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz 3a92a15fba selftests/timers: Add set-tai from the timetest suite
This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz d7b2902c15 selftests/timers: Add leapcrash test from the timetest suite
This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz 5bccfe4153 selftests/timers: Add leap-a-day test from timetest suite
This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:16 -06:00
John Stultz 7290ce1423 selftests/timers: Add clocksource-switch test from timetest suite
Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz 6e8b285bcd selftests/timers: Add skew_consistency test from the timetests suite
This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz d869424558 selftests/timers: Add change_skew test from timetest suite
This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:15 -06:00
John Stultz b7bb8442fa selftests/timers: Add alarmtimer-suspend test from timetests suite
This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00
John Stultz de52133f18 selftests/timers: Add adjtimex validation test from timetest suite
This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00
John Stultz 274d631e48 selftests/timers: Add mqueue latency test from the timetest suite
Add test to validate mqueue timeout latency from the timetest suite

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00
John Stultz e39b60f37e selftests/timers: Add threaded time inconsistency test from timetest suite
Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00
John Stultz 4e40d0a22e selftests/timers: Add set-timer-lat test from timetest suite
Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:14 -06:00
John Stultz 51f91cbdf5 selftests/timers: Add clock skew estimation test from timetest suite
This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.

It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:13 -06:00
John Stultz c5fffcb2bd selftests/timers: Add nsleep-lat test from timetest suite
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:13 -06:00
John Stultz ed3fe34a2a selftests/timers: Add inconsistency-check test from timetests
This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:13 -06:00
John Stultz 689f32fbb8 selftests/timers: Add nanosleep test from timetest suite
Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:13 -06:00
John Stultz 2430ec652d selftests/timers: Quiet warning due to lack of return check on brk
The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.

This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:12 -06:00
John Stultz 03438212d0 selftests/timers: Cleanup Makefile to make it easier to add future tests
Try to streamline the makefile so its easier to add timer/timekeeping
tests.

Also adds support for the CROSS_COMPILE variable.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-12 13:22:12 -06:00
Paul E. McKenney b6505deafa rcutorture: Enable slow grace-period initializations
This commit sets CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y, but leaves the
default time zero.  This can be overridden by passing the
"--bootargs rcutree.gp_init_delay=1" argument to kvm.sh.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-11 13:22:38 -07:00
Michael Ellerman 9a0b57451a selftests/exec: Check if the syscall exists and bail if not
On systems which don't implement sys_execveat(), this test produces a
lot of output.

Add a check at the beginning to see if the syscall is present, and if
not just note one error and return.

When we run on a system that doesn't implement the syscall we will get
ENOSYS back from the kernel, so change the logic that handles
__NR_execveat not being defined to also use ENOSYS rather than -ENOSYS.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: David Drysdale <drysdale@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-03-11 10:15:19 -06:00
Paul E. McKenney 91afa21d5d torture: Avoid script syntax error when insufficient CPUs
Parentheses are special to bash, so use an overflow flag that doesn't
use them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-03 11:17:04 -08:00
Linus Torvalds 12df4289ee The following ktest updates were done:
o Added timings to various parts of the test (build, install,
    boot, tests) and report them so that the users can keep
    track of changes.
 
  o Josh Poimboeuf fixed the console output to work better with
    virtual machine targets.
 
  o Various clean ups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU2VT1AAoJEEjnJuOKh9ldfgMH/A4N2zEzRDx/FGgvFVBF/NOl
 AlwddMyyUsjolL9w+UGUTtXtyyWZFJWvuELaLYwfMF/qI1S+eAZeRQVStQ9UZhj0
 ehjKj5ct8EKVCXgR6GUWvCgzLEbK5AQRPRKAkK9KGDmSdzRP22MU7sFj1ZyXGQCh
 qqHMSnShXiXzEipqg6Oee8gC1IQIjskulcbB4IqGNMYNN/WJXiVGZUVsMLatb09i
 HXz+8P2lh6u1MWb3EX0YvvrZohKgyYf/17V3Hm0JBxLEAFNOkD6q9BqBCRi9LvcU
 5vWA+vcvT6+wjXICL0UmiSZbU/JBD0D6vDkGIAqdluaAvf31gsuNTUrLx6RbW10=
 =/rWI
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest updates from Steven Rostedt:
 "The following ktest updates were done:

   o Added timings to various parts of the test (build, install, boot,
     tests) and report them so that the users can keep track of changes.

   o Josh Poimboeuf fixed the console output to work better with virtual
     machine targets.

   o Various clean ups and fixes"

* tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Place quotes around item variable
  ktest: Cleanup terminal on dodie() failure
  ktest: Print build,install,boot,test times at success and failure
  ktest: Enable user input to the console
  ktest: Give console process a dedicated tty
  ktest: Rename start_monitor_and_boot to start_monitor_and_install
  ktest: Show times for build, install, boot and test
  ktest: Restore tty settings after closing console
  ktest: Add timings for commands
2015-02-12 08:36:38 -08:00
Linus Torvalds d3f180ea1a powerpc updates for 3.20
Including:
 
 - Update of all defconfigs
 - Addition of a bunch of config options to modernise our defconfigs
 - Some PS3 updates from Geoff
 - Optimised memcmp for 64 bit from Anton
 - Fix for kprobes that allows 'perf probe' to work from Naveen
 - Several cxl updates from Ian & Ryan
 - Expanded support for the '24x7' PMU from Cody & Sukadev
 - Freescale updates from Scott:
   "Highlights include 8xx optimizations, some more work on datapath device
    tree content, e300 machine check support, t1040 corenet error reporting,
    and various cleanups and fixes."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU2/LSAAoJEFHr6jzI4aWATDAQAKPU6v2Mq0sLnGst69waHU/Q
 vvpIq9hqVeSr6znHhrnazc3iQTLk0acqIdxUl/dT+5ADhi9+FxGD5Ckk+BH1DDve
 g6mQelSMlVZF9hKonHsbr4iUuTUyZyx2vj2qjdgOaRiv9Xubq6vUFNeolq3AeHxv
 J33vqRTmowj3VJ52u+V1dmzXQGfUye7DG2jHpjXoBieZsroTvyuYm5GoIPblWFO6
 zbYRh6IitALnQRtXfwIManPyWMkJti9JX8PwDkmvacr+V+MXbrksHpIOITMhNlo1
 WsVnFMpxuk80XuUfhaKZgISgBSfCqBckvKDn2QwztF2/kBnV6Su5xiOKVgouzM6B
 myy+maiMZlNJlNjqdMK5v2bqMXICP048zgfMbDN2e1K25jSSlRawt0RngoCQO2EP
 7aWmEDAlL3shgzkl68pj1fevQokxC/40C1yExIgAa9C31+bjtMz4Xb1SfN1SSveW
 7uWEY/eG9eLsrSE1CeBDvh6B8BRdyuIHgPhux4Tgc/bUtBGFQ29NuXwKh3QCeEy9
 9wWrRGx3U69eP06Ey7P5js3jPTQs80bjJewyGaiPQF5XHB89To8Dg8VfXjEV49Dx
 Pa3OLL5QsQloKfEBiEhQeGfKYImC00pVYAxc0qpmnr9T+25Ri1TLdF1EBAwriSYE
 5p9kSW+ZIht0lvzsdPNm
 =xDU3
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Update of all defconfigs

 - Addition of a bunch of config options to modernise our defconfigs

 - Some PS3 updates from Geoff

 - Optimised memcmp for 64 bit from Anton

 - Fix for kprobes that allows 'perf probe' to work from Naveen

 - Several cxl updates from Ian & Ryan

 - Expanded support for the '24x7' PMU from Cody & Sukadev

 - Freescale updates from Scott:
    "Highlights include 8xx optimizations, some more work on datapath
     device tree content, e300 machine check support, t1040 corenet
     error reporting, and various cleanups and fixes"

* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
  cxl: Add missing return statement after handling AFU errror
  cxl: Fail AFU initialisation if an invalid configuration record is found
  cxl: Export optional AFU configuration record in sysfs
  powerpc/mm: Warn on flushing tlb page in kernel context
  powerpc/powernv: Add OPAL soft-poweroff routine
  powerpc/perf/hv-24x7: Document sysfs event description entries
  powerpc/perf/hv-gpci: add the remaining gpci requests
  powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
  powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
  perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
  perf: add PMU_EVENT_ATTR_STRING() helper
  perf: provide sysfs_show for struct perf_pmu_events_attr
  powerpc/kernel: Avoid initializing device-tree pointer twice
  powerpc: Remove old compile time disabled syscall tracing code
  powerpc/kernel: Make syscall_exit a local label
  cxl: Fix device_node reference counting
  powerpc/mm: bail out early when flushing TLB page
  powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  perf/powerpc: reset event hw state when adding it to the PMU
  powerpc/qe: Use strlcpy()
  ...
2015-02-11 18:15:38 -08:00
Steven Rostedt (Red Hat) 7c2c49eceb ktest: Place quotes around item variable
Seems that some of the new console logic causes doprint to possibly
get evaluated. When printing a commit message that contains parenthesis,
it fails with a shell parsing error.

This gets fixed when we add quotes around the $item variable, and prevent
it from being evaluated by any shell commands.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-03 15:45:13 -05:00
Josh Poimboeuf 1cb9e64298 ktest: Cleanup terminal on dodie() failure
If dodie() is called with the console open, restore the terminal's
original settings before dying.

Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:39 -05:00
Steven Rostedt (Red Hat) 4bf6e1fc99 ktest: Print build,install,boot,test times at success and failure
Since both success and failure may shortcut and exit ktest, it is better
to print the status times there too. Once times are printed, the values
for the times are reset, so they will not print more than once.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:30 -05:00
Josh Poimboeuf 9d2f7f051b ktest: Enable user input to the console
Allow the user to send input to the console by putting the terminal in
cbreak mode (to allow reading stdin one character at a time) and copying
all stdin data to the console's pty.

Link: http://lkml.kernel.org/r/bb1bbe7d202c95a3ce7894cfffdd8c725875978e.1422473610.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:24 -05:00
Josh Poimboeuf 9f2cdcbbb9 ktest: Give console process a dedicated tty
Create a pseudoterminal (pty pair) to give the console a dedicated tty
so it doesn't mess with ktest's terminal settings.

Link: http://lkml.kernel.org/r/37b0127f9efad09ff4fc994334db998141e4f6ca.1422473610.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-02 10:43:12 -05:00
Steven Rostedt (Red Hat) 64d982838e ktest: Rename start_monitor_and_boot to start_monitor_and_install
The function start_monitor_and_boot is a misnomer. It use to, but
now it starts the monitor and installs. It does not boot. Rename it
before I get confused by it again.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29 09:02:07 -05:00
Steven Rostedt (Red Hat) 38fa3dc15c ktest: Show times for build, install, boot and test
Seeing the times for how long a build, install, reboot and the
test takes is helpful for analyzing the test process. Seeing
how different changes affect the timings.

Show the build, install, boot and test times when at the end of
the test, or between each interval for tests that do those
mulitple times (like bisect and patchcheck).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-29 09:02:06 -05:00
Josh Poimboeuf 988427829b ktest: Restore tty settings after closing console
When ktest runs the console program as a child process, the parent and
child share the same tty for stdin and stderr.  This is problematic when
using a libvirt target.  The "virsh console" program makes a lot of
changes to the tty settings, making ktest's output hard to read
(carriage returns don't work).  After ktest exits, the terminal is
unusable (CRs broken, stdin isn't echoed).

I think the best way to fix this issue would be to create a
pseudoterminal (pty pair) so the child process would have a dedicated
tty, and then use pipes to connect the two ttys.  I'm not sure if that's
overkill, but it's far beyond my current Perl abilities.

This patch is a much easier way to (partially) fix this issue.  It saves
the tty settings before opening the console and restores them after
closing it.  There are still a few places where ktest prints mangled
output while the console is open, but the output is much more legible
overall, and the terminal works just fine after ktest exits.

Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.com

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27 17:44:57 -05:00
Steven Rostedt (Red Hat) b53486e083 ktest: Add timings for commands
I find that I usually like to see how long a make or other command takes,
and adding a start and end time and reporting how long each command runs
(in seconds) is helpful.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-27 17:44:56 -05:00
Anton Blanchard 521adf5357 selftests/powerpc: Add memcmp testcase
Add a testcase for the new ppc64 memcmp.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23 16:44:23 +11:00
Paul Mackerras 3776c20967 selftests/powerpc: Add subpage protection self test.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>

mpe: Fix compile errors and formatting. Add tempfile logic to Makefile.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23 14:02:49 +11:00
Anshuman Khandual b64eedb88b selftests/powerpc: Make git ignore all binaries in powerpc test suite
This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23 14:02:49 +11:00
Ingo Molnar f49028292c Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

  - Documentation updates.

  - Miscellaneous fixes.

  - Preemptible-RCU fixes, including fixing an old bug in the
    interaction of RCU priority boosting and CPU hotplug.

  - SRCU updates.

  - RCU CPU stall-warning updates.

  - RCU torture-test updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-21 06:12:21 +01:00
Paul E. McKenney 78e691f4ae Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD
doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.
2015-01-15 23:34:34 -08:00
Paul E. McKenney d2f74b5b48 torture: Flag console.log file to prevent holdovers from earlier runs
A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run.  This can fool the developer into thinking
that this failed run actually completed correctly.  This commit therefore
overwrites the console.log file just before launching qemu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:05 -08:00
Paul E. McKenney 16c77ea7d0 torture: Add "-enable-kvm -soundhw pcspk" to qemu command line
More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed.  This commit therefore adds both to the
default qemu command line.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:04 -08:00
Paul E. McKenney 94162c8daa rcutorture: Handle different mpstat versions
The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations.  This commit therefore
uses $NF instead of $12 to select the last (%idle) column.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:03 -08:00
Paul E. McKenney 3b009c0ebe rcutorture: Make build-output parsing correctly flag RCU's warnings
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:07:57 -08:00
Paul E. McKenney 79619cf515 rcutorture: Issue warnings on close calls due to Reader Batch blows
Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor.  This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.

It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks.  In practice, memory misordering
(by both compiler and CPU) can result in false positives.  However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing.  This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:07:46 -08:00
Andrey Skvortsov f5db310d77 selftests/vm: fix link error for transhuge-stress test
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-01-08 09:01:00 -07:00
dann frazier 13e634de09 tools: testing: selftests: mq_perf_tests: Fix infinite loop on ARM
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.

Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-01-06 12:55:21 -07:00
David Drysdale cd805f3676 selftests/exec: allow shell return code of 126
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found.  However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Drysdale <drysdale@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-01-06 12:54:54 -07:00
Paul E. McKenney e9408e4f27 rcutorture: Add checks for stall ending before dump start
The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected.  This commit therefore adds a check for this case.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06 11:05:24 -08:00
Geert Uytterhoeven 6898b627aa selftests/exec: Use %zu to format size_t
On 32-bit:

execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-12-22 11:11:36 -07:00
Andrew Morton 96e869d857 tools/testing/selftests/Makefile: alphasort the TARGETS list
This list is supposed to be sorted, to reduce patch collisions.

Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18 19:08:11 -08:00
Linus Torvalds 87c31b39ab Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace related fixes from Eric Biederman:
 "As these are bug fixes almost all of thes changes are marked for
  backporting to stable.

  The first change (implicitly adding MNT_NODEV on remount) addresses a
  regression that was created when security issues with unprivileged
  remount were closed.  I go on to update the remount test to make it
  easy to detect if this issue reoccurs.

  Then there are a handful of mount and umount related fixes.

  Then half of the changes deal with the a recently discovered design
  bug in the permission checks of gid_map.  Unix since the beginning has
  allowed setting group permissions on files to less than the user and
  other permissions (aka ---rwx---rwx).  As the unix permission checks
  stop as soon as a group matches, and setgroups allows setting groups
  that can not later be dropped, results in a situtation where it is
  possible to legitimately use a group to assign fewer privileges to a
  process.  Which means dropping a group can increase a processes
  privileges.

  The fix I have adopted is that gid_map is now no longer writable
  without privilege unless the new file /proc/self/setgroups has been
  set to permanently disable setgroups.

  The bulk of user namespace using applications even the applications
  using applications using user namespaces without privilege remain
  unaffected by this change.  Unfortunately this ix breaks a couple user
  space applications, that were relying on the problematic behavior (one
  of which was tools/selftests/mount/unprivileged-remount-test.c).

  To hopefully prevent needing a regression fix on top of my security
  fix I rounded folks who work with the container implementations mostly
  like to be affected and encouraged them to test the changes.

    > So far nothing broke on my libvirt-lxc test bed. :-)
    > Tested with openSUSE 13.2 and libvirt 1.2.9.
    > Tested-by: Richard Weinberger <richard@nod.at>

    > Tested on Fedora20 with libvirt 1.2.11, works fine.
    > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>

    > Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
    > Just to be sure I was testing the right thing I also tested using
    > my unprivileged nsexec testcases, and they failed on setgroup/setgid
    > as now expected, and succeeded there without your patches.
    > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>

    > I tested this with Sandstorm.  It breaks as is and it works if I add
    > the setgroups thing.
    > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  userns: Unbreak the unprivileged remount tests
  userns; Correct the comment in map_write
  userns: Allow setting gid_maps without privilege when setgroups is disabled
  userns: Add a knob to disable setgroups on a per user namespace basis
  userns: Rename id_map_mutex to userns_state_mutex
  userns: Only allow the creator of the userns unprivileged mappings
  userns: Check euid no fsuid when establishing an unprivileged uid mapping
  userns: Don't allow unprivileged creation of gid mappings
  userns: Don't allow setgroups until a gid mapping has been setablished
  userns: Document what the invariant required for safe unprivileged mappings.
  groups: Consolidate the setgroups permission checks
  mnt: Clear mnt_expire during pivot_root
  mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
  mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
  umount: Do not allow unmounting rootfs.
  umount: Disallow unprivileged mount force
  mnt: Update unprivileged remount test
  mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
2014-12-17 12:31:40 -08:00
Linus Torvalds 61de8e5364 kselftest updates for 3.19-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUj0wTAAoJEAsCRMQNDUMc/jEQAIcMbtui9jj2B7gfgYpRHX/7
 osfaYgjm2aMc0ccC8hn2WVotnhR2tcg3nOaYRf8/VssNhcQYoAReN2+nHp0LZ/kl
 A8gdh7xq79asM9fZ8pkrvqyyeyBXAZsfQnwOfu1iDa6h0GGGzz7MJZ+f2ky1bPJs
 zf4P2JTpr5jh6lflU1mY+STXOcFojHfy5wr9zgGpGUGxXihiUyVjv31+HbZaVoRV
 7khTuIMPIIkyVXQKTJSJpqZkShoKj6DVResIjEai9oH2LM1WbXVDqitgsEdyErOG
 jm9aF0FRdQm3chXN5KKgOvIcatdhP+kypis/3zSb7zO0aAtIVkNo4PSEaYoC9Huz
 BfFKJbm+j+3alEb/51R0XCcj04qcjhhbx+vhEQpucGb1dnT9C9kRSCYDZH/o0+YZ
 ozgGaiH4IGxoZraxL2QuwxDs5/x8QzAOg/p/bgztgIVkjvjLk8G8+wTo21946vGr
 lpE/fz3DILxL1mQNPjohjFm/FSXb94fQGWb4RQ34x/sJJgus7bz7ftzaeVNqBSbU
 PILJG2QuwT1xxEV44eXTCQycQTZQ/v8o2R0QzjzqR5hU7Oz6d86Rt+ijNO+JFWuA
 kFCm1EdhSirzZ5R2V3IjQKJGhwXZMs4+BINA14FP9zik1xYSH2Sx+o2fWJ335rzm
 geA73v1btvT1xQ0mrI+K
 =DL3K
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "kselftest updates for 3.19-rc1:

   - kcmp test include file cleanup
   - kcmp change to build on all architectures
   - A light weight kselftest framework that provides a set of
     interfaces for tests to use to report results.  In addition,
     several tests are updated to use the framework.
   - A new runtime system size test that prints the amount of RAM that
     the currently running system is using"

* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest: size: Add size test for Linux kernel
  selftests/kcmp: Always try to build the test
  selftests/kcmp: Don't include kernel headers
  kcmp: Move kcmp.h into uapi
  selftests/timers: change test to use ksft framework
  selftests/kcmp: change test to use ksft framework
  selftests/ipc: change test to use ksft framework
  selftests/breakpoints: change test to use ksft framework
  selftests: add kselftest framework for uniform test reporting
  selftests/user: move test out of Makefile into a shell script
  selftests/net: move test out of Makefile into a shell script
2014-12-16 13:15:12 -08:00
Linus Torvalds 78a45c6f06 Merge branch 'akpm' (second patch-bomb from Andrew)
Merge second patchbomb from Andrew Morton:
 - the rest of MM
 - misc fs fixes
 - add execveat() syscall
 - new ratelimit feature for fault-injection
 - decompressor updates
 - ipc/ updates
 - fallocate feature creep
 - fsnotify cleanups
 - a few other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
  cgroups: Documentation: fix trivial typos and wrong paragraph numberings
  parisc: percpu: update comments referring to __get_cpu_var
  percpu: update local_ops.txt to reflect this_cpu operations
  percpu: remove __get_cpu_var and __raw_get_cpu_var macros
  fsnotify: remove destroy_list from fsnotify_mark
  fsnotify: unify inode and mount marks handling
  fallocate: create FAN_MODIFY and IN_MODIFY events
  mm/cma: make kmemleak ignore CMA regions
  slub: fix cpuset check in get_any_partial
  slab: fix cpuset check in fallback_alloc
  shmdt: use i_size_read() instead of ->i_size
  ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
  ipc/msg: increase MSGMNI, remove scaling
  ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
  ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
  lib/decompress.c: consistency of compress formats for kernel image
  decompress_bunzip2: off by one in get_next_block()
  usr/Kconfig: make initrd compression algorithm selection not expert
  fault-inject: add ratelimit option
  ratelimit: add initialization macro
  ...
2014-12-13 13:00:36 -08:00
David Drysdale c9b26b81af syscalls: add selftest for execveat(2)
Signed-off-by: David Drysdale <drysdale@google.com>
Cc: Meredydd Luff <meredydd@senatehouse.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:51 -08:00
Linus Torvalds 823e334ecd Docs changes for the 3.19 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUiaPRAAoJEI3ONVYwIuV68qQP/2j93CDahLEXlpbimdHCOyKO
 xLKYwSIOxpzCTv8mQouNH4czVDheSSrq+xDUafioaMRlM80fb1EdhC9Nhr/xT/O+
 fCsgfLETlpxAS4j6gjn60H8QYdnBgcz0p2hOgvysf8WHZ0PHzSnfE78BGS1Mnugs
 gjF97y5pa3p+uTNNxHA7aB+Rg3/JbsuDXH0CtdzjpsS0bM/MBnGV0AQLLZ3qdzvf
 6bSwb8LyV54cRjYrs0SZT0OWrPXlUc0AxjrQjq2IcyL+s5Uwu/Eb1RoZ69C14ohC
 h5A1C87v4asqrzsC0VCqG48wi36+2k7zfVT7wSkHfERXWGtjpd7Uy3lccMMPLg/H
 Mnt6EKDVn4L2b8VOM1wl8pj0kIbln/g2whJ6x40Q3R4uO8o94Vy0HpeTTeNxdwyY
 iERVkHPuRAZ2SLrz4BheiGRgcePgocMrofyGcJ3/ezMGcq3sUZnAJYmJYF+S5jkZ
 Q94ee8jgypgEvuQHX52n3AiqJspNpqAGqXE5ZY4PgLt4KlwbT1yQ5hXUX34ou+3u
 sLkFO8vNUQa4o1TTfwCzkPun/Aoy+Rb8BCzgbml/FlPgidXpNcofO/g5BWRjXwOX
 mpUCNPiMhryx0aTrEgl1GChholqToakS6RTvqdxUKC3honKWBQ93zsWSDkEzS+3h
 +qxzXDCN3u3Py9r/XvPK
 =Pq+D
 -----END PGP SIGNATURE-----

Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6

Pull documentation update from Jonathan Corbet:
 "Here's my set of accumulated documentation changes for 3.19.

  It includes a couple of additions to the coding style document, some
  fixes for minor build problems within the documentation tree, the
  relocation of the kselftest docs, and various tweaks and additions.

  A couple of changes reach outside of Documentation/; they only make
  trivial comment changes and I did my best to get the required acks.

  Complete with a shiny signed tag this time around"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
  kobject: grammar fix
  Input: xpad - update docs to reflect current state
  Documentation: Build mic/mpssd only for x86_64
  cgroups: Documentation: fix wrong cgroupfs paths
  Documentation/email-clients.txt: add info about Claws Mail
  CodingStyle: add some more error handling guidelines
  kselftest: Move the docs to the Documentation dir
  Documentation: fix formatting to make 's' happy
  Documentation: power: Fix typo in Documentation/power
  Documentation: vm: Add 1GB large page support information
  ipv4: add kernel parameter tcpmhash_entries
  Documentation: Fix a typo in mailbox.txt
  treewide: Fix typo in Documentation/DocBook/device-drivers
  CodingStyle: Add a chapter on conditional compilation
2014-12-12 14:42:48 -08:00
Eric W. Biederman db86da7cb7 userns: Unbreak the unprivileged remount tests
A security fix in caused the way the unprivileged remount tests were
using user namespaces to break.  Tweak the way user namespaces are
being used so the test works again.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-12-11 18:07:07 -06:00
Linus Torvalds f74ea36848 The following ktest updates were done:
o Fix handling the make kernelrelease change
  o Fix make_min_config that was broken by new bisect_config changes
  o Allow tests to undefine default options (not just being able to override
     them)
  o Print name of test (if defined) to start of test output
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUheY3AAoJEEjnJuOKh9ld+CgH/16NxltuIVFMTDB+I7AP/ixV
 YP2m4dGn0wrzg8GhZNJX7x9irh8Shg5da4mjqH163qylNfQl7QuALzs5c7B3ZDv3
 dQa2GMR34/bUbcqejrZm7fcwRH8yw1E88hAs71CNM+PMW1AAe8CBth2ogCXC/V8N
 uln7Fr0aS3Y/sPxWzkCp4Y8ZAsoRMei3igfnJUPu0a1p7pyKaN0ne060S5znWYwl
 8fW4DACR1EppMmfwdslORN9miPol4nuBQICmqNM6shtJaef6yb9aErSiTTT4m4PK
 RIpWZasmosKBIeIkTXWxLhr3liEFTMm3BsflD+YUnIM7cLFziHGDp6ThH3TwwSo=
 =Y3vY
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest changes from Steven Rostedt:
 "The following ktest updates were done:

   - Fix handling the make kernelrelease change
   - Fix make_min_config that was broken by new bisect_config changes
   - Allow tests to undefine default options (not just being able to
     override them)
   - Print name of test (if defined) to start of test output"

* tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add back "tail -1" to kernelrelease make
  ktest: Add name to running title
  ktest: Allow tests to undefine default options
  ktest: Fix make_min_config to handle new assign_configs call
  ktest: Use make -s kernelrelease
2014-12-10 20:40:51 -08:00
Linus Torvalds c32809521d Updates for the ftrace self tests:
o Added kprobes on ftrace testcase
  o Sort test cases
  o Add file to hold helper functions
  o Use logfile name supported by busybox's mktemp
  o Clear trace buffer after running kprobe test
  o Fix show descriptions when run on dash shell
  o Add --verbose option for showing echo output
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhbSvAAoJEEjnJuOKh9ldB84H+gNuE2PPvsxmgSxFP0bdo+Uw
 k/8C2QBU6xLXZFZvqXnH7P0gLP2OIjpOBOTKt+yjkB/Elm+XnMVV1Xy+k7VLBiMD
 g+DRoIcpJL2dOy/D8t/P4SjVNXt4Btwxf/tCTabbubLc+aBmvkEG4DL2Vk/Xl5+Y
 XH1dBgYvI9irAxgnYpBnPlN7WIWg1+WCshdOtqkNGRuyJ1G9gn0VlxGmNF7B+0ye
 cjFj19loPMGzmYBDgGCa9ypQHEP1F97t+WUEDrwCZsXLtaA7Z4bumXTrxKQWsmdT
 bDZQTEFcQ9EYQGvqbaz+nHb94P8cyFrSNvSiAAqhuc2ZqigYWUYDEvFjYxSSGAE=
 =eiD2
 -----END PGP SIGNATURE-----

Merge tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace self-test updates from Steven Rostedt:
 "Updates for the ftrace self tests:

   - Added kprobes on ftrace testcase
   - Sort test cases
   - Add file to hold helper functions
   - Use logfile name supported by busybox's mktemp
   - Clear trace buffer after running kprobe test
   - Fix show descriptions when run on dash shell
   - Add --verbose option for showing echo output"

* tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Add --verbose option for showing echo output
  ftracetest: Fix to show descriptions on dash
  ftracetest: Add basic event tracing test cases
  ftracetest: Clear trace buffer after running kprobe testcases
  ftracetest: Use logfile name supported by busybox's mktemp
  ftracetest: Add a couple of ftrace test cases
  ftracetest: Add functions file that holds helper functions
  ftracetest: Sort testcases
  ftracetest: Add kprobes on ftrace testcase
2014-12-10 20:03:45 -08:00
Masami Hiramatsu 57cee23650 ftracetest: Add --verbose option for showing echo output
Add --verbose/-v option for showing echo output in testcases.
This is good for checking the progress of testcases which
take a longer time to run.

To implement this feature, all the testcase failures are
captured in ftracetest and send signal to set SIG_RESULT=FAIL.

Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomain

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-04 10:40:34 -05:00
Masami Hiramatsu 36922d133c ftracetest: Fix to show descriptions on dash
The ftracetest doesn't show testcase's descriptions when
it is executed on dash. This fixes that to show the
descriptions on dash correctly by passing it via a variable
instead of directly passing the grep command output.

Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomain

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-04 10:38:49 -05:00
Tim Bird 3ce51050fa selftest: size: Add size test for Linux kernel
This test shows the amount of memory used by the system.
Note that this is dependent on the user-space that is loaded
when this program runs.  Optimally, this program would be
run as the init program itself.

The program is optimized for size itself, to avoid conflating
its own execution with that of the system software.
The code is compiled statically, with no stdlibs. On my x86_64 system,
this results in a statically linked binary of less than 5K.

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-12-03 19:27:47 -07:00
Michael Ellerman 4c12df63f7 selftests/kcmp: Always try to build the test
Don't prevent the test building on non-x86. Just try and build it and
let the chips fall where they may.

Add support for CROSS_COMPILE while we're at it. Also we don't need a
custom rule for building kcmp_test.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-12-02 13:53:24 -07:00
Michael Ellerman 41ec8cdcfa selftests/kcmp: Don't include kernel headers
The kcmp test mucks with the include path to bring in the kernel
headers, and x86 headers too for reasons that are not clear.

Now that kcmp.h is exported none of that should be necessary.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-12-02 13:53:15 -07:00
Eric W. Biederman 4a44a19b47 mnt: Update unprivileged remount test
- MNT_NODEV should be irrelevant except when reading back mount flags,
  no longer specify MNT_NODEV on remount.

- Test MNT_NODEV on devpts where it is meaningful even for unprivileged mounts.

- Add a test to verify that remount of a prexisting mount with the same flags
  is allowed and does not change those flags.

- Cleanup up the definitions of MS_REC, MS_RELATIME, MS_STRICTATIME that are used
  when the code is built in an environment without them.

- Correct the test error messages when tests fail.  There were not 5 tests
  that tested MS_RELATIME.

Cc: stable@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2014-12-02 10:46:48 -06:00
Tim Bird 3c415707b3 kselftest: Move the docs to the Documentation dir
Also, adjust the formatting a bit, and expand the section about using
TARGETS= on the make command line.

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-11-24 10:49:54 -07:00
Steven Rostedt (Red Hat) 17150fef4a ktest: Add back "tail -1" to kernelrelease make
Commit 52d21580b3 "ktest: Use make -s kernelrelease" fixed commit
7ff525712a "kbuild: fake the "Entering directory ..." message more simply"
as that commit added output after the make kernelrelease. But there's still
some build scripts that are used by ktest that has output before the make
is executed, and requires that only the last line is printed.

Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-23 15:13:44 -05:00
Steven Rostedt (Red Hat) 18656c7099 ktest: Add name to running title
Instead of just showing the test type of test in the start of the
test, like this:

  RUNNING TEST 1 of 26 with option build defconfig

Add the name (if it is defined) as well, like this:

  RUNNING TEST 1 of 26 (arm64 aarch64-linux) with option build defconfig

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:58 -05:00
Steven Rostedt (Red Hat) 22c37a9ac4 ktest: Allow tests to undefine default options
Tests can set options that override the default ones. But if a test
tries to undefine a default option, it is simply ignored and the
default option stays as is.

For example, if you want to have a test that defines no MIN_CONFIG
then the test should be able to do that with:

   TEST_START
   MIN_CONFIG =

Which should make MIN_CONFIG not defined for that test. But the way
the code currently works, undefined options in tests are dropped.
This is because the NULL options are evaluated during the reading of
the config file and since one can disable default options in the default
section with this method, it is evaluated there (the option turns to a
undef). But undef options in the test section mean to use the default
option.

To fix this, keep the empty string in the option during the reading
of the config file, and then evaluate it when running the test. This
will allow tests to null out default options.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:57 -05:00
Steven Rostedt (Red Hat) 9972fc0b85 ktest: Fix make_min_config to handle new assign_configs call
Commit 6071c22e17 "ktest: Rewrite the config-bisect to actually work"
fixed the config-bisect to work nicely but in doing so it broke
make_min_config by changing the way assign_configs works.

The assign_configs function now adds the config to the hash even if
it is disabled, but changes the hash value to be that of the
line "# CONFIG_FOO is not set". Unfortunately, the make_min_config
test only checks to see if the config is removed. It now needs to
check if the config is in the hash and not set to be disabled.

Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:38:56 -05:00
Michal Marek 52d21580b3 ktest: Use make -s kernelrelease
The previous tail -1 broke with commit 7ff525712a ("kbuild: fake the
"Entering directory ..." message more simply")

Link: http://lkml.kernel.org/r/20141022194408.GA20989@pobox.suse.cz

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 19:37:56 -05:00
Ingo Molnar d360b78f99 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Streamline RCU's use of per-CPU variables, shifting from "cpu"
   arguments to functions to "this_"-style per-CPU variable accessors.

 - Signal-handling RCU updates.

 - Real-time updates.

 - Torture-test updates.

 - Miscellaneous fixes.

 - Documentation updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-20 08:57:58 +01:00
Shuah Khan 884716497d selftests/timers: change test to use ksft framework
Change timers test to use kselftest framework to report
test results.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:39:30 -07:00
Shuah Khan e061bcd885 selftests/kcmp: change test to use ksft framework
Change kcmp test to use kselftest framework to report
test results and test statistics.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:39:24 -07:00
Shuah Khan 56661564e1 selftests/ipc: change test to use ksft framework
Change ipc test to use kselftest framework to report
test results. With this change this test exits with
EXIT_FAIL instead of -errno. Changed print errno in
test fail messages to not loose that information.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:39:15 -07:00
Shuah Khan b36169041c selftests/breakpoints: change test to use ksft framework
Change breakpoints test to use kselftest framework to report
test results.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:39:08 -07:00
Shuah Khan 7fb2c3ea28 selftests: add kselftest framework for uniform test reporting
Add kselftest framework for tests to use. This is a light
weight framework provides a set of interfaces to report test
results. Tests can use these interfaces to report pass, and
fail cases as well as when failure is due to configuration
problems such as missing modules, or when a test that is should
fail, fails as expected, and a test that should fail, passes.
The framework uses POSIX standard return codes for reporting
results to address the needs of users that want to run the kernel
selftests from their user-space test suites and want to know why a
test failed. In addition, the framework includes interfaces to use
to report test statistics on number of tests passed and failed.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:38:56 -07:00
Shuah Khan 3c25fa14f0 selftests/user: move test out of Makefile into a shell script
Currently user copy test is run from the Makefile. Move it out
of the Makefile to be run from a shell script to allow the test
to be run as stand-alone test, in addition to allowing the test
run from a make target.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2014-11-17 10:05:35 -07:00
Linus Torvalds 5cf5203704 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) sunhme driver lacks DMA mapping error checks, based upon a report by
    Meelis Roos.

 2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.

 3) DMA memory allocation sizes are wrong in systemport ethernet driver,
    fix from Florian Fainelli.

 4) Fix use after free in mac80211 defragmentation code, from Johannes
    Berg.

 5) Some networking uapi headers missing from Kbuild file, from Stephen
    Hemminger.

 6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
    and macvtap has a similar bug, from Herbert Xu.

 7) Adjust several tunneling drivers to set dev->iflink after registry,
    because registry sets that to -1 overwriting whatever we did.  From
    Steffen Klassert.

 8) Geneve forgets to set inner tunneling type, causing GSO segmentation
    to fail on some NICs.  From Jesse Gross.

 9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
    Giuseppe CAVALLARO.

10) Fix spurious timeouts with NewReno on low traffic connections, from
    Marcelo Leitner.

11) Fix descriptor updates in enic driver, from Govindarajulu
    Varadarajan.

12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
    Fix from Takashi Iwai.

13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
    Borkmann.

14) psock_fanout selftest accesses past the end of the mmap ring, fix
    from Shuah Khan.

15) Fix PTP timestamping for VLAN packets, from Richard Cochran.

16) netlink_unbind() calls in netlink pass wrong initial argument, from
    Hiroaki SHIMODA.

17) vxlan socket reuse accidently reuses a socket when the address
    family is different, so we have to explicitly check this, from
    Marcelo Lietner.

18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
    and other architectures, from Guenter Roeck.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  vxlan: Do not reuse sockets for a different address family
  smsc911x: power-up phydev before doing a software reset.
  lib: rhashtable - Remove weird non-ASCII characters from comments
  net/smsc911x: Fix delays in the PHY enable/disable routines
  net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
  netlink: Properly unbind in error conditions.
  net: ptp: fix time stamp matching logic for VLAN packets.
  cxgb4 : dcb open-lldp interop fixes
  selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
  net: bcmgenet: apply MII configuration in bcmgenet_open()
  net: bcmgenet: connect and disconnect from the PHY state machine
  net: qualcomm: Fix dependency
  ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
  net: phy: Correctly handle MII ioctl which changes autonegotiation.
  ipv6: fix IPV6_PKTINFO with v4 mapped
  net: sctp: fix memory leak in auth key management
  net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
  net: ppp: Don't call bpf_prog_create() in ppp_lock
  net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
  cxgb4 : Fix bug in DCB app deletion
  ...
2014-11-13 17:54:08 -08:00
Paul E. McKenney 9ea6c58856 Merge branches 'torture.2014.11.03a', 'cpu.2014.11.03a', 'doc.2014.11.13a', 'fixes.2014.11.13a', 'signal.2014.10.29a' and 'rt.2014.10.29a' into HEAD
cpu.2014.11.03a: Changes for per-CPU variables.
doc.2014.11.13a: Documentation updates.
fixes.2014.11.13a: Miscellaneous fixes.
signal.2014.10.29a: Signal changes.
rt.2014.10.29a: Real-time changes.
torture.2014.11.03a: torture-test changes.
2014-11-13 10:39:04 -08:00
Shuah Khan fbf8e7211a selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
The while loop in sock_fanout_read_ring() checks mmap region
bounds after access, causing it to segfault. Fix it to check
count before accessing header->tp_status. This problem can be
reproduced consistently when the test in run as follows:

    make -C tools/testing/selftests TARGETS=net run_tests
    or
    make run_tests from tools/testing/selftests
    or
    make run_test from tools/testing/selftests/net

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11 21:43:34 -05:00
Namhyung Kim 815b18ea66 ftracetest: Add basic event tracing test cases
This patch adds basic event tracing tests like enable/disable with
top-level, subsystem-level and individual event files.

  # ./ftracetest
  === Ftrace unit tests ===
  [1] Basic trace file check	[PASS]
  [2] Basic trace clock test	[PASS]
  [3] Basic event tracing check	[PASS]
  [4] Basic test for tracers	[PASS]
  [5] event tracing - enable/disable with top level files	[PASS]
  [6] event tracing - enable/disable with subsystem level files	[PASS]
  [7] event tracing - enable/disable with event level files	[PASS]
  [8] ftrace - function graph filters	[PASS]
  [9] ftrace - function profiler with function tracing	[PASS]
  [10] ftrace - function graph filters with stack tracer	[PASS]
  [11] Kretprobe dynamic event with arguments	[PASS]
  [12] Kprobe dynamic event - busy event check	[PASS]
  [13] Kprobe dynamic event with arguments	[PASS]
  [14] Kprobe dynamic event - adding and removing	[PASS]

  # of passed:  14
  # of failed:  0
  # of unresolved:  0
  # of untested:  0
  # of unsupported:  0
  # of xfailed:  0
  # of undefined(test bug):  0

Link: http://lkml.kernel.org/r/1415239470-28705-3-git-send-email-namhyung@kernel.org

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-06 08:40:59 -05:00
Namhyung Kim ce1ac64b93 ftracetest: Clear trace buffer after running kprobe testcases
The kprobe testcases create, use and delete dynamic events during the
test but didn't clear the trace buffer so it'll leave the result after
it finishes.

  # ./ftracetest
  ...

  # cat trace
  # tracer: nop
  #
  # entries-in-buffer/entries-written: 2/2   #P:12
  #
  #                              _-----=> irqs-off
  #                             / _----=> need-resched
  #                            | / _---=> hardirq/softirq
  #                            || / _--=> preempt-depth
  #                            ||| /     delay
  #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
  #              | |       |   ||||       |         |
        ftracetest-26474 [009] d..1 79417.143782: Unknown type 1099
        ftracetest-26498 [009] d..1 79417.208034: Unknown type 1101

Link: http://lkml.kernel.org/r/1415239470-28705-2-git-send-email-namhyung@kernel.org

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-06 08:39:39 -05:00
Namhyung Kim 347e0e46b1 ftracetest: Use logfile name supported by busybox's mktemp
When I run the ftracetest in a busybox docker container, I saw
following error.  Make the logfile template to comply with busybox's
mktemp.  It also keep the logfiles under the logs directory.

  # /linux/tools/testing/selftests/ftrace/ftracetest
  === Ftrace unit tests ===
  mktemp: unrecognized option `--tmpdir=/linux/tools/testing/selftests/ftrace/logs/20141106-003624/'
  BusyBox v1.22.1 (2014-05-22 23:22:11 UTC) multi-call binary.

  Usage: mktemp [-dt] [-p DIR] [TEMPLATE]

  Create a temporary file with name based on TEMPLATE and print its name.
  TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).
  Without TEMPLATE, -t tmp.XXXXXX is assumed.

  	-d	  Make directory, not file
  	-q	  Fail silently on errors
  	-t	  Prepend base directory name to TEMPLATE
  	-p DIR	  Use DIR as a base directory (implies -t)
  	-u Do not create anything; print a name

  Base directory is: -p DIR, else $TMPDIR, else /tmp

  [1] Basic trace file check/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
  /linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
						  [FAIL]

Link: http://lkml.kernel.org/r/1415239470-28705-1-git-send-email-namhyung@kernel.org

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-06 08:38:46 -05:00
Steven Rostedt (Red Hat) c6c93242db ftracetest: Add a couple of ftrace test cases
Added three test cases to get the feel of adding tests to ftracetest.
The three cases are:

  function profiling test, to make sure function profiling still works
   with function tracing (was a regression)

  function graph filter test to make sure that function graph filtering works.

  function graph filter with stack tracing test to make sure that the function
   graph filter does filter and also continues to filter when another function tracer
   is running (like the stack tracer)

Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.602754370@goodmis.org

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-06 08:35:52 -05:00
Steven Rostedt (Red Hat) ee3988c77e ftracetest: Add functions file that holds helper functions
Created the file tools/testing/ftrace/test.d/functions that will
hold helper functions.

Current helper functions include:

 Add clear_trace() helper to reset the trace file

   Used as a descriptive name to show that "echo > trace" is clearing
   the trace file.

 Add disable/enable_tracing() helper calls

   Add calls that disable and enable tracing respectively by echoing
   0 or 1 into tracing_on.

 Add helper reset_tracer() function

    Add a helper function reset_tracer() that will clear the current_tracer
    (echo nop > current_tracer).

Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.465517119@goodmis.org

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-06 08:30:02 -05:00
Shuah Khan 7069a97a14 selftests/net: move test out of Makefile into a shell script
Currently bpf test run from the Makefile. Move it out of the
Makefile to be run from a shell script to allow the test to
be run as stand-alone test, in addition to allowing the test
run from a make target.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
2014-11-05 08:12:40 -07:00
Linus Torvalds 1efa82ecb6 Running the ftracetests on a machine that had the debugfs file system
mounted in two locations caused the ftracetests to fail. This is because
 the ftracetests script does a grep of the /proc/mounts file to find
 where the debugfs file system is mounted. If it is mounted twice, then
 the grep returns two lines instead of just one. This causes the ftracetests
 to get confused and fail.
 
 Use "head -1" to only return the first mount point for debugfs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUV812AAoJEEjnJuOKh9ldquIIAK1DeSn6QQrA2qytqZmaW/dh
 M1QiG+Ot5Qh7+qli7Sun5E58jbMvclPCiHrtr44KEGDSzABrjjv8TnqCwI9XKfiO
 hn9IGFy2gCU7jNMdE+1MRPwykVwLjYBZLaLyxY/WvwJTtlPORezq7KTdvUPgobCN
 hQfxPyowofbGTsV9+75olSo9ercOKGv4NSopY2fj6fag185emUDLT4GGWGsWh/1j
 heUhe4vYuuB43YAVgk+XeJEOQ8u4uME9lTocuykISazXupZo4+RfZzQPziD5Q/Mt
 LuOg4zUpG7fX2AkECXvTR055CcCVVHKUTBZppIpeKqfAXBU6GeoaP1AM2CDx72I=
 =jKWc
 -----END PGP SIGNATURE-----

Merge tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftracetest fix from Steven Rostedt:
 "Running the ftracetests on a machine that had the debugfs file system
  mounted in two locations caused the ftracetests to fail.  This is
  because the ftracetests script does a grep of the /proc/mounts file to
  find where the debugfs file system is mounted.  If it is mounted
  twice, then the grep returns two lines instead of just one.  This
  causes the ftracetests to get confused and fail.

  Use "head -1" to only return the first mount point for debugfs"

* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Take the first debugfs mount found
2014-11-04 11:12:25 -08:00
Pranith Kumar edae018d95 rcutorture: Remove obsolete kversion param in kvm.sh
Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-03 19:26:40 -08:00
Pranith Kumar f8396fed2c rcutorture: Remove stale test configurations
Remove rcutorture configuration files which are no longer necessary.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-03 19:26:39 -08:00
Pranith Kumar 10d2e62c41 rcutorture: Enable RCU self test in configs
Add config and boot parameters to enable the self tests in rcutorture testing.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-03 19:26:38 -08:00
Paul E. McKenney 2f3fd499df torture: Run Linux-kernel binary out of results directory
The rcutorture scripts create a qemu-cmd script containing the actual
qemu command.  However, this command references the build directory,
which will be overwritten by later builds.  This commit therefore runs
the kernel out of the results directory so that less hand-editing is
required to re-run a previous test.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-11-03 19:26:00 -08:00
Heiko Carstens 52100d7f1c ftracetest: Sort testcases
Make sure the order of the executed testcases is always the same.

Link: http://lkml.kernel.org/p/1413802323-5297-3-git-send-email-heiko.carstens@de.ibm.com

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 14:15:47 -05:00
Heiko Carstens d20058f674 ftracetest: Add kprobes on ftrace testcase
Add a kprobes on ftrace testcase. The testcase verifies that
- enabling and disabling function tracing works on a function which
  already contains a dynamic kprobe
- adding and removing a dynamic kprobe works on a function which is
  already enabled for function tracing

Link: http://lkml.kernel.org/p/1413802323-5297-2-git-send-email-heiko.carstens@de.ibm.com

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 14:15:46 -05:00
Steven Rostedt (Red Hat) e7dbb48958 ftracetest: Take the first debugfs mount found
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.

If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.

Use "head -1" to only take the first mount point found.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-03 13:42:49 -05:00
Pranith Kumar 28f6569ab7 rcu: Remove redundant TREE_PREEMPT_RCU config option
PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:20:05 -07:00
Clark Williams 21871d7eff rcu: Unify boost and kthread priorities
Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).

Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).

Signed-off-by: Clark Williams <clark.williams@gmail.com>
[ paulmck: Ported to rcu/dev, applied Paul Bolle and Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:19:41 -07:00
Paul E. McKenney 0eafa46823 rcu: Remove CONFIG_RCU_CPU_STALL_VERBOSE
The CONFIG_RCU_CPU_STALL_VERBOSE Kconfig parameter causes preemptible
RCU's CPU stall warnings to dump out any preempted tasks that are blocking
the current RCU grace period.  This information is useful, and the default
has been CONFIG_RCU_CPU_STALL_VERBOSE=y for some years.  It is therefore
time for this commit to remove this Kconfig parameter, so that future
kernel builds will always act as if CONFIG_RCU_CPU_STALL_VERBOSE=y.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-28 13:48:13 -07:00
Linus Torvalds d6dd50e07c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - changes related to No-CBs CPUs and NO_HZ_FULL

   - RCU-tasks implementation

   - torture-test updates

   - miscellaneous fixes

   - locktorture updates

   - RCU documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  workqueue: Use cond_resched_rcu_qs macro
  workqueue: Add quiescent state between work items
  locktorture: Cleanup header usage
  locktorture: Cannot hold read and write lock
  locktorture: Fix __acquire annotation for spinlock irq
  locktorture: Support rwlocks
  rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
  locktorture: Document boot/module parameters
  rcutorture: Rename rcutorture_runnable parameter
  locktorture: Add test scenario for rwsem_lock
  locktorture: Add test scenario for mutex_lock
  locktorture: Make torture scripting account for new _runnable name
  locktorture: Introduce torture context
  locktorture: Support rwsems
  locktorture: Add infrastructure for torturing read locks
  torture: Address race in module cleanup
  locktorture: Make statistics generic
  locktorture: Teach about lock debugging
  locktorture: Support mutexes
  locktorture: Add documentation
  ...
2014-10-13 15:44:12 +02:00
Linus Torvalds 47e0de1a74 kselftest Updates for 3.18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUMr9WAAoJEAsCRMQNDUMcEDoP/24bG92X33inVd3QafO7bYl/
 PHHdB6xwM+ino5Ot0Ws85aqHM/KVmmXM7rke8/WFbVA5nmpvjvybAm5VzmgVa/CE
 V8SAPrdn5CjnukhZhgOLiTJCJ7hzRn5+DDw+fuiZNhQBy3Abnywz3s4gcJ1+g3la
 /DUZ3VL+5+bxJ7PYyRKFlAsLXLZdPc8uvw6U5FFPj0lh9T2T0yJZrTEgCBjsKoYS
 rL7s0akd3NHtq/Xa3efJYrcXx4QsyA1nK9eflcp0QE8Kd9mhEu5f9ftFlmFnROj6
 3BksB9aWRj370KL1acQbQWnK7fTfSMdQRpQErStC8sQnMBPJ4sa798o8V+9qYkVo
 4gj+BScMUs/3JydKNelynJVc6AMn847xzaO+PszBQtTmPpHtP7YGl0fEqMigLGqb
 SkTBfwICr/tSGza4nTDdBKLvi01UM3fQYfICmk3zWzNoWBw5mJVKJkzbetBZF8vq
 mjb9T1VgDp9EQov4vmJVB9c6hUMXqaOEYs5yzIRsAb7jJihaRI9bZm0el8CfoJ8Q
 9APQv0bob/lwNXXJhmeubRwDnNVHE85M3FTspRPBtD7nI7u32Y47KIegM7MMz6Yi
 U2x8iCusyHEoBsPGZBzGXZxFqTpI/Bpa20zaYMOL79D91PmSagTqS+8JCd+9KFgN
 fOUvXVByrYlG2y3tM2IN
 =J1XN
 -----END PGP SIGNATURE-----

Merge tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 - fix for missing arguments to printf
 - fix to build failures on 32-bit systems.
 - enhancement to run memfd_test run on all architectures as most
   architectures support __NR_memfd_create

* tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/memfd: Run test on all architectures
  memfd_test: Add missing argument to printf()
  memfd_test: Make it work on 32-bit systems
2014-10-12 09:16:43 -04:00
Linus Torvalds 90eac7eee2 This patch series starts a new selftests section in the
tools/testing/selftest directory called "ftrace" that holds tests
 aimed at testing ftrace and subsystems that use ftrace (like kprobes).
 
 So far only a few tests were written (by Masami Hiramatsu), but more will
 be added in the near future (3.19).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUNXv0AAoJEKQekfcNnQGuCtkH/1bQgWWVZk0zphISmR01stPj
 ods1P937icSXxFyrz2sVf7qht5GCisWkvSC34AWcBP88fY0KFPYAiR+4WlbCr3Y5
 TEjEt/qRaBEDRtUzW5mjQMwTZ/G4KBMXOh87yrffQs8eSuIXcK55chkddtnMFZ13
 H2bx27rMqFamOLbj3vyAfxUayonZsaXl7YQfRq1lu3jvZCi3zBJdjohHtXvrjKDo
 dJ+ZIJtazuFV/LmsCfEtjibQNCQiVIbsxRJ/oCqUAYzKyY4gFwWbqsyH9g0Wv7HX
 LAJpNgChLAau+mUQoVpc4tPU/NBCGPgVoV5ojdKJXU6WYkIkCUaIi6qBEHpG8LE=
 =HFgG
 -----END PGP SIGNATURE-----

Merge tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace test code from Steven Rostedt:
 "This patch series starts a new selftests section in the
  tools/testing/selftest directory called "ftrace" that holds tests
  aimed at testing ftrace and subsystems that use ftrace (like kprobes).

  So far only a few tests were written (by Masami Hiramatsu), but more
  will be added in the near future (3.19)"

* tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Add selftest scripts testing kprobe-tracer as startup test
  ftracetest: Add POSIX.3 standard and XFAIL result codes
  ftracetest: Add kprobe basic testcases
  ftracetest: Add ftrace basic testcases
  ftracetest: Initial commit for ftracetest
2014-10-12 07:33:37 -04:00
Linus Torvalds 6bbcb1d3a2 A fix and a clean up to ktest, as well as two small features.
A way to allow users to skip a manual bisect.
  Allowing cherry picked patches to be tested.
 
 The cherry pick worked for a test I needed, but stressing it may
 not have all the desired effects. It doesn't cause any regressions
 so I kept it in.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUNFfHAAoJEKQekfcNnQGubhQIAIIq4PMmdEwsaK31yVCjG4TX
 BFrMb1JSoGaXzgAwEItqUEj4JYQ0Px8eIqsK7llff2OC7MHnOjHvb7KjxyF+z/6G
 KFhraE0GSoJsX9YPno7ZYihoNTmcm7KdVgt2l+G159p83neaUEYY6/2Hj86+IbXA
 y6CoIroOhiY96i7PUrMtYfPLUsUc6J5tjTNmRzs4w1SB7y0KO5uUBfJyAE8msNnM
 18Z+a8B12u8KMwC6mVmJr81TgWbVIRw5lwrXXHLaL4FbIC1tkuAduW2uuN0yf0hv
 11d3hY205Eskr7ms9cr903pr7P2YQcRTwMgBt7c1hwHAG6D+2s7/PATn6Jj/Hz8=
 =a3Bk
 -----END PGP SIGNATURE-----

Merge tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest update from Steven Rostedt:
 "A fix and a clean up to ktest, as well as two small features.

   - A way to allow users to skip a manual bisect.
   - Allowing cherry picked patches to be tested.

  The cherry pick worked for a test I needed, but stressing it may not
  have all the desired effects.  It doesn't cause any regressions so I
  kept it in"

* tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Don't bother with bisect good or bad on replay
  ktest: Fix check for new kernel success on rebooting to good kernel
  ktest: add ability to skip during BISECT_MANUAL
  ktest: Add PATCHCHECK_CHERRY
2014-10-12 07:32:26 -04:00